Made by Jaguare19
" https://3dcarparts.org/library/2012/Ford/Fiesta/trunk-led-support https://r2-upload.3dcarparts.workers.dev/file/parts/27f47092-f829-461f-8cb7-a6bb1ecdbee2/images/trunk-led-support-1_1778049070449_x9jzid.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2012/Ford/Fiesta/trunk-led-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-355ea8ab-7d6c-4b26-a214-5065cf651bbc 2002 Ford Fiesta Mirror Adjuster Knob Gaiter Mount "Reverse engineered a replacement of Ford Fiesta MK6 (02-08) mirror adjuster knob mount thingy for the gaiter
Made for a mate and printed in PETG so it wont warp when it comes to summer" https://3dcarparts.org/library/2002/Ford/Fiesta/mirror-adjuster-knob-gaiter-mount https://r2-upload.3dcarparts.workers.dev/file/parts/355ea8ab-7d6c-4b26-a214-5065cf651bbc/images/mirror-adjuster-knob-gaiter-mount-1_1778049066842_ijvdgx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Ford/Fiesta/mirror-adjuster-knob-gaiter-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f14da4c4-0513-47a8-b28e-673169d89ee6 2012 Ford Fiesta Trunk LED Light Support "# Light Trunk LED
*For Ford fiesta MK7 (2012-2017)*
Made by Jaguare19
" https://3dcarparts.org/library/2012/Ford/Fiesta/trunk-led-light-support https://r2-upload.3dcarparts.workers.dev/file/parts/f14da4c4-0513-47a8-b28e-673169d89ee6/images/trunk-led-light-support-1_1778049063435_xxp6ih.jpg in_stock 11.73 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2012/Ford/Fiesta/trunk-led-light-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13df5064-1eff-43a0-bb72-cd4aaa775c2e 2016 Ford Fiesta Cubby Tray "A cubby tray I designed to make the weird cubby in the Fiesta center console useable. This should provide a perfect fit for any of the fiestas with that cubby (mk7s...2016 and on, I think). See pictures for reference.
I printed this in ASA, but you can probably get away with ABS or PETG, if you want (I just find ASA prints better than PETG and is less stinky than ABS...plus, UV protection!) Just remember your car interior will probably get hot enough to warp PLA.
Print the model with the back/rear of the tray flat against the build plate. The overhangs are such that you should not need any supports, but you know your printer best. I printed with no supports and it came out very nice. Make sure you establish good, first layer adhesion to prevent failures late in the print. Use a brim or raft if it makes sense for your set up. Remember, since the bottom of the print is the back of the tray, it's ok if it is not absolutely perfect (nobody will ever see it).
Of desired, you can put a bit of double-sided tape on the back of the tray, to hold it in place, but I have never found it necessary.
As always, my designs are free to use, but please don't steal or sell 'em. Good luck, and happy printing!" https://3dcarparts.org/library/2016/Ford/Fiesta/cubby-tray https://r2-upload.3dcarparts.workers.dev/file/parts/13df5064-1eff-43a0-bb72-cd4aaa775c2e/images/cubby-tray-1_1778049059724_jaz09n.jpg in_stock 15.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Ford/Fiesta/cubby-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-16560e58-5570-4894-8374-2afb7d86d8b6 2022 Subaru Outback Cup Holder Water Bottle Adapter "Was looking for an adapter for my thermal water bottles (88mm or just a little less than 3.5 inches) so they would fit in my 22 Outback cup holders. One did not exist, so I made one. Will also include a solid model of the cup holder envelope for anyone that wants to use it to make their own customizations.
Printed in PETG with no supports needed." https://3dcarparts.org/library/2022/Subaru/Outback/cup-holder-water-bottle-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/16560e58-5570-4894-8374-2afb7d86d8b6/images/cup-holder-water-bottle-adapter-1_1778048504842_owan9i.jpg in_stock 29.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Subaru/Outback/cup-holder-water-bottle-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b5647017-17f4-44fa-9373-2dec96b27fce 2017 Subaru Outback Dashcam Mount Base "This is a remix from ajquick's Outback eyesight dashcam mount. https://www.thingiverse.com/thing:2662019
I have a BlackSys dashcam so the mount needs to different. I modified the mount base to have a generic adapter so that different mounts for different things can be created.
Print it with PETG or materials with higher temperature resistance. I think PLA will deform in hot weather.
9/11/2019 -- Thingiverse is not producing model snapshots. Re-uploading the files to see if it shows up." https://3dcarparts.org/library/2017/Subaru/Outback/dashcam-mount-base https://3dcarparts.org/og-image-library.png in_stock 7.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2017/Subaru/Outback/dashcam-mount-base?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a03d3031-3672-4aa9-b488-2c0973c7a340 2006 Subaru Outback Trunk Privacy Screen Extender Clip Pocket I somehow lost these little privacy screen extender clips years ago. So I designed a replacement. They fit nice and snugly in my 2006 Outback. Not sure what other years and models they apply to but it worked for mine. https://3dcarparts.org/library/2006/Subaru/Outback/trunk-privacy-screen-extender-clip-pocket https://r2-upload.3dcarparts.workers.dev/file/parts/a03d3031-3672-4aa9-b488-2c0973c7a340/images/trunk-privacy-screen-extender-clip-pocket-1_1778048495076_9yh2fh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Subaru/Outback/trunk-privacy-screen-extender-clip-pocket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-46e9209a-23ad-4608-8152-4526ecac854a 2015 Subaru Outback Carpet Retainer Screw 2015 Subaru Outback Carpet Retainer Screw 3D printable automotive replacement part. https://3dcarparts.org/library/2015/Subaru/Outback/carpet-retainer-screw https://r2-upload.3dcarparts.workers.dev/file/parts/46e9209a-23ad-4608-8152-4526ecac854a/images/carpet-retainer-screw-1_1778048491065_vko3dl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Subaru/Outback/carpet-retainer-screw?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9b21b784-f9d5-459e-9633-630dae161c69 2008 Subaru WRX/STI Bumper Vent Clip "A slightly more robust version of the clips that hold the vents on either side of the bumper of an 08-14 subaru wrx/sti. I highly reccomend either removing the bumper or the fender liner and pushing the clip into place during instalation to ensure they click into place properly as they are slightly more rigid than the oem clips and losing a vent on the road is never fun. Hopefully this helps someone out in the future as parts become less available.
I have used pla to great success for temporary use, though i reccomend petg/abs for warmer climates or more permanent use" https://3dcarparts.org/library/2008/Subaru/WRX%2FSTI/bumper-vent-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9b21b784-f9d5-459e-9633-630dae161c69/images/bumper-vent-clip-1_1778048487512_5rts85.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Subaru/WRX%2FSTI/bumper-vent-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c9065e43-0237-4e06-b9f3-b8f60a1c184e 2005 Subaru Outback Tow Bar Cover Cap "A simple plastic cover for the detachable tow bar. When the tow bar is detached, there is supposed to be a cap, that protects it from dust, salt, etc.. Mine got lost, so I designed a new one.
It might fit other cars, but the one it fits for sure is Subaru Outback 2005 with the detachable AL-KO tow bar.
Part numbers, that might help identify the correct device:
L101EAG971
EAG071
The designed is parametric and can be tuned with following variables:
dia1 - the tow bar diameter
wall - width of walls
height1 - the position of the hooks - how deep inside.
tooth - size of the hooks (careful, must remain printable!)
The sweet spot for good fit is height1=17 and tooth=0.5. with height1=17.6 the tooth engage and lock behind the inner step so well, that it needs a tool to get removed (and many tooth broke). So let me know if this fits your car!" https://3dcarparts.org/library/2005/Subaru/Outback/tow-bar-cover-cap https://r2-upload.3dcarparts.workers.dev/file/parts/c9065e43-0237-4e06-b9f3-b8f60a1c184e/images/tow-bar-cover-cap-1_1778048483642_ve2x5i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Subaru/Outback/tow-bar-cover-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-99aa06dd-2f0a-40c0-b240-03d40c53e96f 2003 Subaru Baja Bed clip The bed clips for the Baja break too easily. This is the alternative. Body 1 STL file is the old design. The new one is a two part. It is Body 15 and Body 17 File https://3dcarparts.org/library/2003/Subaru/Baja/bed-clip https://r2-upload.3dcarparts.workers.dev/file/parts/99aa06dd-2f0a-40c0-b240-03d40c53e96f/images/bed-clip-1_1778048478499_3ugufi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Subaru/Baja/bed-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b17bf720-d04b-4d37-ae4e-13db1707f8a9 1994 Subaru Legacy Fog Light Clip "This is a model of the clip for the front beam that centers the fog light
i made it from TPU with 100% infill" https://3dcarparts.org/library/1994/Subaru/Legacy/fog-light-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b17bf720-d04b-4d37-ae4e-13db1707f8a9/images/fog-light-clip-1_1778048471775_jyvlv0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1994/Subaru/Legacy/fog-light-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40c5dcdd-cba3-4948-b944-42a3784c6bda 2018 Subaru Outback Headrest Hook "This was designed to be easy to print, strong enough to hold heavy objects, and most importantly avoid damaging the leather seat. It was designed around a 2018 Subaru Outback but should fit and car with a removable headrest. Let me know if you have a need for a longer model.
Print on edge with the flat part on your build surface. This orients the part for maximum strength, do not use support. It is engineered to not use support." https://3dcarparts.org/library/2018/Subaru/Outback/headrest-hook https://r2-upload.3dcarparts.workers.dev/file/parts/40c5dcdd-cba3-4948-b944-42a3784c6bda/images/headrest-hook-1_1778048463486_xvb7fr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Subaru/Outback/headrest-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-972199fd-136a-4d21-b888-14677118f92b 2007 Subaru Legacy GT / Outback XT Cubby Gauge Pod "I ordered 60mm Gauges and couldn't find a suitable pod.
I have revised the STL for 52mm gauges as well.
The Gauges have been rotated 15 degrees towards the driver.
I redesigned the Tabs/Legs/Feet to better fit the dash. At least for my 2007 they now fit perfect. These are designed to slip over the existing posts. There is 1.75mm of smaller diameter to hold it to the post which is the same thickness as the factory cubby tabs. The tops are slotted exactly how the factory vents are constructed to fit perfectly in the original location. The lower tab has been shortened to better fit the location of the tab on the back of the clock. I also thickened the tab that inserts into the back of the body for a tighter fit. This may be year specific so please confirm with your own dash. You can use the factory screws to hold it all back in place.
A huge thanks goes out to the original designer which saved me a lot of time in design.
I used 3x10 countersunk screws to hold the tabs to the body." https://3dcarparts.org/library/2007/Subaru/Legacy%20GT%20%2F%20Outback%20XT/cubby-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/972199fd-136a-4d21-b888-14677118f92b/images/cubby-gauge-pod-1_1778048454314_dzsu2p.jpg in_stock 26.40 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Subaru/Legacy%20GT%20%2F%20Outback%20XT/cubby-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-639a1603-4b6c-4bed-9fa9-2d83bd3e59e9 2020 Subaru Outback Console Charging Port Tray Insert This is a tray that fits into the console where the charging ports are so things don't slide/roll all the way down the hole. It doesn't block the usb & audio ports. https://3dcarparts.org/library/2020/Subaru/Outback/console-charging-port-tray-insert https://3dcarparts.org/og-image-library.png in_stock 17.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Subaru/Outback/console-charging-port-tray-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2448a9d8-f375-4057-8b9f-15e25dcc02f3 2017 Subaru Outback Mask Holder Hook This is a mask holder for my car, 2017 Subaru Outback, but may work for other vehicles. Vehicle seat post dimensions are 98mm between posts with each post being 13mm diameter. The thing's dimensions are 96mm between posts with 15mm diameter posts. Enjoy! https://3dcarparts.org/library/2017/Subaru/Outback/mask-holder-hook https://r2-upload.3dcarparts.workers.dev/file/parts/2448a9d8-f375-4057-8b9f-15e25dcc02f3/images/mask-holder-hook-1_1778048442102_daxxrd.jpg in_stock 20.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Subaru/Outback/mask-holder-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-65eb449d-5ba1-44cd-9c3a-e0a8db7734ac 2005 Subaru Legacy Reverse Light Bulb Adapter "Bulb adapter for '05-'09 Subaru Legacy and Outback Wagon reverse lights to support ""20W T15"" led bulbs. These the black and green ones with 4xCREE XB-D LED's. OEM appears to be Baobao with part number DCD-T15-B.
This puts the LED's at the same optical center as an upgrade ""ERD"" bulb. I haven't checked them vs standard 921 bulbs.
For the clip in tabs you'll need to print with support enabled. There is no stopper on rotation, so you'll have to be careful not to over rotate the adapter in the housing." https://3dcarparts.org/library/2005/Subaru/Legacy/reverse-light-bulb-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/65eb449d-5ba1-44cd-9c3a-e0a8db7734ac/images/reverse-light-bulb-adapter-1_1778048438019_h9lv94.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2005/Subaru/Legacy/reverse-light-bulb-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-248bba07-d527-418c-aa5b-eb36114408b4 2018 Subaru Outback Backup Camera Roof Cover "Backup Camera Roof 5.0
Test Vehicle: 2018 Subaru Outback
Total redesign on the backup camera roof. I widened the ""awning"" to minimize the tunnel vision/visual blocking of the camera. I also raised it a bit around the lip. It'll stick out a little more, but hopefully it'll still be effective.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2OInCUoGIeF" https://3dcarparts.org/library/2018/Subaru/Outback/backup-camera-roof-cover https://r2-upload.3dcarparts.workers.dev/file/parts/248bba07-d527-418c-aa5b-eb36114408b4/images/backup-camera-roof-cover-1_1778048434687_7qw8vr.jpg in_stock 10.01 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2018/Subaru/Outback/backup-camera-roof-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4df5387d-795d-491c-8012-20a74a76a8f1 2013 Subaru BRZ Sun Visor Mount "Driver Side (Left) and Passenger Side (Right) sun visor mounts for the Subaru BRZ/Scion FRS/Toyota FT86. It was designed off of the 2013 BRZ and should fit other years and models. Subaru and Toyota do not sell the mount itself but only sell the visor as a complete assembly for too much money.
Also included are visor deletes.
NOTE: PLA will soften in normal summer temperatures. You need to print this with high temperature resistant filament. I printed mine in Prusament PC Blend.
Installation:
1. Before installing in the car, heat up the clip portion of the mount with a heat gun or hair drying.
2. Insert visor into clip.
3. Squeeze hot clip around the visor post.
4. Let cool.
5. Mount in car." https://3dcarparts.org/library/2013/Subaru/BRZ/sun-visor-mount https://r2-upload.3dcarparts.workers.dev/file/parts/4df5387d-795d-491c-8012-20a74a76a8f1/images/sun-visor-mount-1_1778048426034_z2xuuf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Subaru/BRZ/sun-visor-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a962529f-10cc-4ea9-9437-9e037b0ff9a0 2021 Subaru Outback Cup Holder Spacer Wife bought a new 2021 Subaru Outback and it came with one of the cup holder spacer things. She wanted another so here we are. The black is the original model, the grey is the glittery grey PLA filament that shipped with my printer. The original is some type of soft rubber. This could probably be printed in TPU, but I haven't tried it. https://3dcarparts.org/library/2021/Subaru/Outback/cup-holder-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/a962529f-10cc-4ea9-9437-9e037b0ff9a0/images/cup-holder-spacer-1_1778048415656_pudt9w.jpg in_stock 8.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2021/Subaru/Outback/cup-holder-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4fdedf71-8cdf-4dca-9257-ce81d11af4a6 2006 Subaru Baja License Plate Trim Clip When I got an inspection done on my 06 Baja, these little trim clips broke. I couldn't find any oem ones anywhere, so I designed and printed an exact replica https://3dcarparts.org/library/2006/Subaru/Baja/license-plate-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4fdedf71-8cdf-4dca-9257-ce81d11af4a6/images/license-plate-trim-clip-1_1778048411439_scj8si.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Subaru/Baja/license-plate-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-74572b48-15c7-4467-8aa9-249115306f14 2017 Subaru WRX CD Display Sun Shade "This is a simple sun shade to make the display easier to read in sunlight. It has very simple cutouts for the knobs. I designed it to fit my 2017 Subaru WRX but any screen that falls under the CD player should be easy to either use directly or be modified.
Print this in ABS. PLA will melt in the heat." https://3dcarparts.org/library/2017/Subaru/WRX/cd-display-sun-shade https://r2-upload.3dcarparts.workers.dev/file/parts/74572b48-15c7-4467-8aa9-249115306f14/images/cd-display-sun-shade-1_1778048407433_09qwng.jpg in_stock 20.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Subaru/WRX/cd-display-sun-shade?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fc164972-811d-4403-a92a-277a8b67d2cd 2015 Subaru WRX Storage Console Organizer "Storage organizer that sits under the heating controls in 2015-2021 WRX and STIs. The leftmost compartment holds mini hand sanitizer bottles, the middle holds cards for parking (includes a thumb slot for easier grasp) and a right side miscelaneous storage compartment. I usually put a mini swiss army knife and a tube of chapstick over there.
The wall on the right side is lower than the left to allow for cigarette lighter clearance.
I built this a couple years ago and I've been using it everyday since. Not the most exciting item, but it is the print that I use more than anything else I've made." https://3dcarparts.org/library/2015/Subaru/WRX/storage-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/fc164972-811d-4403-a92a-277a8b67d2cd/images/storage-console-organizer-1_1778048402759_w1bcnn.jpg in_stock 28.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Subaru/WRX/storage-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5f9c6210-a26b-4858-bef5-6b62ba34d71a 2017 Subaru WRX/STI Trunk Hole Plug Super simple replacement plug for Subaru WRX trunk hole. If you've come this far, I shouldn't need to explain any more. Press fit into place with a hammer and you're set. Fits my '17 STI perfect. https://3dcarparts.org/library/2017/Subaru/WRX%2FSTI/trunk-hole-plug https://r2-upload.3dcarparts.workers.dev/file/parts/5f9c6210-a26b-4858-bef5-6b62ba34d71a/images/trunk-hole-plug-1_1778048399200_60rjz5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2017/Subaru/WRX%2FSTI/trunk-hole-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2bfe9f8-3c5a-402a-a02b-905e4a0a411b 2002 Subaru WRX Fog Light Cover Print with the flat side down, 100% infill. I attached to my fog light lens with cut-up command-strips, cut the long way and fixed along the edge of the cover. https://3dcarparts.org/library/2002/Subaru/WRX/fog-light-cover https://r2-upload.3dcarparts.workers.dev/file/parts/b2bfe9f8-3c5a-402a-a02b-905e4a0a411b/images/fog-light-cover-1_1778048395512_hschfg.jpg in_stock 12.18 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Subaru/WRX/fog-light-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e9228f07-9887-43c5-af50-8676410f59a6 2015 Subaru WRX Tweeter Mount Bracket "This is a tweeter bracket for the tweeters in a 2015+ WRX
Should fit most 1.5"" tweeters (42mm mounting hole)" https://3dcarparts.org/library/2015/Subaru/WRX/tweeter-mount-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e9228f07-9887-43c5-af50-8676410f59a6/images/tweeter-mount-bracket-1_1778048391478_pct4ie.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2015/Subaru/WRX/tweeter-mount-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0e39dc21-ce1e-40e6-8dc2-73b5d5f5e901 2015 Subaru WRX Tweeter Adapter Plate This is a tweeter adapter plate i made that is designed to replace the awful factory tweeters that come in the 2015+ subaru wrx with the base sound system. It is sized to use dayton audio ND28F-6 tweeters which can be picked up from parts express. All you need to do to install these tweeters is just take off the plug assembly from the bottom of the stock tweeters and solder the wires on to the new tweeters. The white wire will be your positive and black your negative terminal. Made the part much thicker than it really needs to be to ensure there wont be much sagging or deformation due to heat. If you use a plastic other than pla that can handle heat, these should be able to made much thinner. With the current plate thickness, you will need to trim away some of the webbing that is on the back side of the factory speaker grills to make sure the tweeter has clearance. https://3dcarparts.org/library/2015/Subaru/WRX/tweeter-adapter-plate https://r2-upload.3dcarparts.workers.dev/file/parts/0e39dc21-ce1e-40e6-8dc2-73b5d5f5e901/images/tweeter-adapter-plate-1_1778048388217_ldfouu.jpg in_stock 7.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2015/Subaru/WRX/tweeter-adapter-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f866ba1d-58fe-4af5-9f2a-41b0a6225f99 2015 Subaru WRX Rear Speaker Bracket I made and used this to mount a set of Alpine S-S65 coaxial speakers in the rear doors of my 2016 WRX. You may need to tweak diameters to the specific speaker you plan on mounting. https://3dcarparts.org/library/2015/Subaru/WRX/rear-speaker-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/f866ba1d-58fe-4af5-9f2a-41b0a6225f99/images/rear-speaker-bracket-1_1778048384585_8t0erm.jpg in_stock 27.91 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2015/Subaru/WRX/rear-speaker-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-86d9ad5b-8e06-4250-8fe7-428992e6abd5 2008 Subaru Impreza WRX Speaker Mounts Remix of the 2015+ audio frog speaker mount. The opening is about 169mm with about a 6mm recess on the top for the speaker. The center cutout is about 150mm. The mounting holes were close to the edge, I drilled them out at 5/32 for the screws I was using and they hold fine. https://3dcarparts.org/library/2008/Subaru/Impreza%20WRX/speaker-mounts https://r2-upload.3dcarparts.workers.dev/file/parts/86d9ad5b-8e06-4250-8fe7-428992e6abd5/images/speaker-mounts-1_1778047909949_6t1dgo.jpg in_stock 25.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Impreza%20WRX/speaker-mounts?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-020344aa-2a5c-41b4-b7cb-70999318bc26 2003 Subaru Impreza Tail Light Upper Clip This is that darn top clip for the tail-light. Should just click in the then the Tail light should be pushed into it. https://3dcarparts.org/library/2003/Subaru/Impreza/tail-light-upper-clip https://r2-upload.3dcarparts.workers.dev/file/parts/020344aa-2a5c-41b4-b7cb-70999318bc26/images/tail-light-upper-clip-1_1778047905276_oqhldz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Subaru/Impreza/tail-light-upper-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e7aec2c-6cc7-40c9-ad92-16f2577ccbbf 2024 Subaru Impreza Console Change Tray Tray for change and small items for inside the console of a 2024 Subaru Impreza. Formed to fit the back of the opening. Should fit any console where the inside width of the console is 5.725 and there is .125 clearance between the armrest and the console base when closed for the tray ears. Designed to fit tight so it doesn't slide around, if you want it to slide or remove easily, print it at 97 or 98%. Printed with PETG on Creality K2 Plus. https://3dcarparts.org/library/2024/Subaru/Impreza/console-change-tray https://r2-upload.3dcarparts.workers.dev/file/parts/1e7aec2c-6cc7-40c9-ad92-16f2577ccbbf/images/console-change-tray-1_1778047901614_ku0zcq.jpg in_stock 21.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2024/Subaru/Impreza/console-change-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ce1d9391-0608-4397-a0e9-3d4734968ecd 2015 Subaru Outback Console Organizer This is a console organizer for my Subaru Outback 2017. It should fit the rest of the generation, but I offer no guarantees. I basically created a box that would fit, and then subtracted smaller boxes for what I needed to place in there to get it organized. The divot is needed so nothing gets hidden under the organizer. https://3dcarparts.org/library/2015/Subaru/Outback/console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/ce1d9391-0608-4397-a0e9-3d4734968ecd/images/console-organizer-1_1778047897714_nmhuer.jpg in_stock 19.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Subaru/Outback/console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d9b65c24-8a50-44d8-9132-f93b7ccfd3f6 2011 Subaru Outback Headlight Drainage Cap "Subaru Outback 2011 headlights drainage caps.
Print this with PETG.
2 pieces for each headlight needed." https://3dcarparts.org/library/2011/Subaru/Outback/headlight-drainage-cap https://r2-upload.3dcarparts.workers.dev/file/parts/d9b65c24-8a50-44d8-9132-f93b7ccfd3f6/images/headlight-drainage-cap-1_1778047893215_5ybcym.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2011/Subaru/Outback/headlight-drainage-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3b5ef07b-9530-44af-a002-d35a4cbd14b9 2020 Subaru Outback Cup Holder Shim The Legacy / Outback typically comes with one cupholder shim and you might want a second one. This is pretty inexpensive from Subaru directly (part #92076AN00A), but you might want to print one because its more convenient or you want to customize it with a design or color. I printed one from TPU, so that it would be similar to the original. FreeCad file attached so you can customize. https://3dcarparts.org/library/2020/Subaru/Outback/cup-holder-shim https://r2-upload.3dcarparts.workers.dev/file/parts/3b5ef07b-9530-44af-a002-d35a4cbd14b9/images/cup-holder-shim-1_1778047889849_lzb77g.jpg in_stock 11.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Subaru/Outback/cup-holder-shim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-84ea1347-5f4d-4fb9-8272-7b4ca437f4ff 2016 Subaru Outback Cup Holder Spacer I made these spacers so cans and bottles would not rattle around and tip over in a 2016 Subaru Outback. https://3dcarparts.org/library/2016/Subaru/Outback/cup-holder-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/84ea1347-5f4d-4fb9-8272-7b4ca437f4ff/images/cup-holder-spacer-1_1778047884522_lnfjmh.jpg in_stock 8.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Subaru/Outback/cup-holder-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bc8e29c0-c1e0-46bd-96c8-62823d0a850c 2022 Subaru Outback Armrest Organizer Tray "Drew this up quickly to make some useful space in the upper compartment of my 2022 Outback Wilderness. There's a semi-circular quarter holder in one of the compartments. Feel free to doctor this up for your needs.
Prints very nicely with PLA and PETG. Going to try with PC/blend for better heat resistance.
I'd love to see some pics." https://3dcarparts.org/library/2022/Subaru/Outback/armrest-organizer-tray https://r2-upload.3dcarparts.workers.dev/file/parts/bc8e29c0-c1e0-46bd-96c8-62823d0a850c/images/armrest-organizer-tray-1_1778047878856_4c6sot.jpg in_stock 20.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Subaru/Outback/armrest-organizer-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e37945da-9579-4413-bc02-65d76d42aee5 2011 Subaru Outback Gas Cap Holder The original fit my 2012 Forester but not my wife's 2011 Outback. I trimmed the bottom flange to fit behind the reinforcing sheet metal. It's not a perfect fit; it moves around a bit. However, it works and would be easy to secure with some Goop, ShoeGoo, or Gorilla Grip. https://3dcarparts.org/library/2011/Subaru/Outback/gas-cap-holder https://r2-upload.3dcarparts.workers.dev/file/parts/e37945da-9579-4413-bc02-65d76d42aee5/images/gas-cap-holder-1_1778047875136_vjfpm4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2011/Subaru/Outback/gas-cap-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e6fdf89f-f278-4716-91d2-b0a48592067d 2016 Subaru Outback Cup Holder Insert "I really disliked the cup holders in my 2016 Outback as my coffee cup always clanked around during my commutes so the first thing I did when I got a 3D printer was come up with and insert for the cup holder. I designed this around my nozzle, 0.40mm with (2) perimeters and (4) solid bottom layers. Printing it like that makes it somewhat flexible when printing with PETG. In any event it should print fairly fast using minimal material and will work quite well. I made the ID to accommodate my Starbucks travel cup, 71.5mm ID and beveled the upper lip so the cup will slide into the holder without fuss...
edit: for some reason the first stl I uploaded was corrupt a corrected version is now uploaded." https://3dcarparts.org/library/2016/Subaru/Outback/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/e6fdf89f-f278-4716-91d2-b0a48592067d/images/cup-holder-insert-1_1778047864358_glzwk5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Subaru/Outback/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf2e6aea-a7fa-4270-a6d0-97b96c4dd8e1 1998 Subaru Outback / Legacy Fog Light Cover Grille its a scan of original subaru legacy lancaster/Outback fog light cover https://3dcarparts.org/library/1998/Subaru/Outback%20%2F%20Legacy/fog-light-cover-grille https://r2-upload.3dcarparts.workers.dev/file/parts/cf2e6aea-a7fa-4270-a6d0-97b96c4dd8e1/images/fog-light-cover-grille-1_1778047859279_p9u8oj.jpg in_stock 17.91 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Subaru/Outback%20%2F%20Legacy/fog-light-cover-grille?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fd7c5a00-b877-471c-a6be-70470b953dd2 2010 Subaru Outback Cup Holder Divider "fits 2011 Subaru Outback
Sould fit 2010-2014
and possibly other models of subaru
Print in TPU with low infill." https://3dcarparts.org/library/2010/Subaru/Outback/cup-holder-divider https://r2-upload.3dcarparts.workers.dev/file/parts/fd7c5a00-b877-471c-a6be-70470b953dd2/images/cup-holder-divider-1_1778047855575_5jjd5q.jpg in_stock 18.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Subaru/Outback/cup-holder-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5501d003-f8cd-4035-b663-68684d7940d7 2015 Subaru Outback Center Console Trash Bin and Swiffer Compartment "Designed a Trash Bin and Swiffer compartment for my Outback. Use widely available dogs ""POOPS!"" bags.
PETG recommended for very hot days.
.SKP included." https://3dcarparts.org/library/2015/Subaru/Outback/center-console-trash-bin-and-swiffer-compartment https://r2-upload.3dcarparts.workers.dev/file/parts/5501d003-f8cd-4035-b663-68684d7940d7/images/center-console-trash-bin-and-swiffer-compartment-1_1778047852144_xsbogx.jpg in_stock 37.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Subaru/Outback/center-console-trash-bin-and-swiffer-compartment?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cc79af25-3a46-42b2-98bb-e05ebfa090fe 2011 Subaru Outback Cup Holder Divider "This remix removes the ""wings"" from the original design turning it into a simple divider. Print top-down in PLA without support." https://3dcarparts.org/library/2011/Subaru/Outback/cup-holder-divider https://r2-upload.3dcarparts.workers.dev/file/parts/cc79af25-3a46-42b2-98bb-e05ebfa090fe/images/cup-holder-divider-1_1778047848676_1y2v58.jpg in_stock 17.42 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Outback/cup-holder-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-085e23a5-64e4-4698-82ef-13c46b9778d5 2002 Subaru Outback Pillar Gauge Pod "this is a 52mm gauge pod for a 2002 Subaru outback that will screw into the pillar
this will fit a 52 mm gauge, i used the ring and a set screw to hold the gauge in place but still leaving the ability for it to be removed" https://3dcarparts.org/library/2002/Subaru/Outback/pillar-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/085e23a5-64e4-4698-82ef-13c46b9778d5/images/pillar-gauge-pod-1_1778047843891_tq3gl5.jpg in_stock 18.48 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Outback/pillar-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fffdb0e1-56b8-4016-b8d5-965272e2a519 2015 Subaru Outback Rear Door Speaker Adapter "An adapter to mount a 6.5"" speaker in the rear doors of a 5th generation (2015-2019) Subaru Outback." https://3dcarparts.org/library/2015/Subaru/Outback/rear-door-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/fffdb0e1-56b8-4016-b8d5-965272e2a519/images/rear-door-speaker-adapter-1_1778047838546_c97sfm.jpg in_stock 29.53 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2015/Subaru/Outback/rear-door-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13b1a58b-97b3-4b39-8147-579ae9db7edf 2020 Subaru Outback Cup Holder Insert "I got tired of coke cans and water bottles flailing about in the oversized cup holders on my 2020 Subaru Outback. There are two holders here. The taller one is for cans, water bottles, and coke bottles. The smaller size fit those, but is tapered to fit a medium sized soft drink at your favorite eatery. No more tipping ... or at least it is now limited depending on the cup.
No special settings used." https://3dcarparts.org/library/2020/Subaru/Outback/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/13b1a58b-97b3-4b39-8147-579ae9db7edf/images/cup-holder-insert-1_1778047834401_fedzsv.jpg in_stock 22.80 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Subaru/Outback/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-028d67c0-5c9d-4391-978d-67bcf5293cb6 2017 Subaru Outback Rearview Mirror Parking Permit Holder "This is a parking hanging attachment. It works perfectly, but does hit the rearview mirror when going over any decent bumps, but it's just a small noise.
I designed this because my parking permit couldn't be hung on the rearview mirror for my brand new car, Subaru Outback 2017.
I did have to do some mild post-processing so the bracket and tall connector could actually fit before being snapped into place. There is a small bump INSIDE the tall connector that needs to be placed in the correct alignment when attaching the connector to the bracket, so just look for this prior to attaching on the mirror." https://3dcarparts.org/library/2017/Subaru/Outback/rearview-mirror-parking-permit-holder https://r2-upload.3dcarparts.workers.dev/file/parts/028d67c0-5c9d-4391-978d-67bcf5293cb6/images/rearview-mirror-parking-permit-holder-1_1778047830011_8teldy.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Subaru/Outback/rearview-mirror-parking-permit-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ac8a8d3d-c5aa-4b68-910d-c371c7c24931 1999 Subaru Legacy Outback Cargo Cover Clip "The cargo cover clips on my Subaru break periodically and I have always had to buy more from the manufacturer. Not anymore. Although this design is more solid and robust than the manufacturer's, I suspect my use of PLA will result in me changing these clips just as regularly, if not more, but now for a fraction of the cost.
Designed in Fusion 360, sliced by Slic3r, and Printed on an Ender 3 Pro. I recommend using a mirroring tool in your slicer to generate the other side. This file is only the driver's side clip." https://3dcarparts.org/library/1999/Subaru/Legacy%20Outback/cargo-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ac8a8d3d-c5aa-4b68-910d-c371c7c24931/images/cargo-cover-clip-1_1778047826618_zieawq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Subaru/Legacy%20Outback/cargo-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3b997dcf-d0b4-4bb2-b008-91968dc9981c 2016 Subaru Outback Cup Holder Soda Can Adapter "After the car wash place used silicone cleaner on the little insert that goes in the bottom of the cup holder, my can of Diet Mug Root Beer started sliding around in turns, and sloshing out of the can.
This adapter fixes the problem. The inside diameter is slightly larger than a soda can. It prevents the can from sliding around, yet the can is still easily inserted and removed. Although the can has sufficient clearance, there is a slight air resistance effect. I like this, but if you don't, you could add some ""exhaust channels"" on either the inside or outside faces.
Be sure to flip the object 180 degrees when added into the slicer program. You want the wider part on the print surface.
This will probably fit several different year models, but mine is a 2016.
Update: Also fits a 2018 Outback. And don't use PLA, it will absorb any moisture on the outside of the can (""sweat""), expand, and the can won't fit anymore. Didn't figure that until it was warm enough for the can to sweat. The one printed in ABS version hasn't had a problem yet." https://3dcarparts.org/library/2016/Subaru/Outback/cup-holder-soda-can-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/3b997dcf-d0b4-4bb2-b008-91968dc9981c/images/cup-holder-soda-can-adapter-1_1778047823346_n40r0m.jpg in_stock 18.72 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Subaru/Outback/cup-holder-soda-can-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-510ae039-2661-4499-902e-4ef49f367686 1999 Subaru Legacy Outback Cargo Cover Catch "Based on pquijal's Thing but basically remade. Not perfect but fits and functions, popped right into my '99 Legacy Outback and should fit and work fine in all related models of Subaru. Used the original screws, no idea what to do if yours are missing. STEP file included if anyone wants to refine this further.
My print looks a little rough because I used a ""draft mode"" slicer profile, since function matters to me more than cosmetics on this. I printed with the end of the square nub on the build plate so the support interface surfaces are all hidden when installed in the car.
This is only for the RH side, mirror in your slicer for LH use." https://3dcarparts.org/library/1999/Subaru/Legacy%20Outback/cargo-cover-catch https://r2-upload.3dcarparts.workers.dev/file/parts/510ae039-2661-4499-902e-4ef49f367686/images/cargo-cover-catch-1_1778047819079_m40zu3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Subaru/Legacy%20Outback/cargo-cover-catch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fafc3c7c-abe6-474b-ba29-98df014afc6c 2013 Subaru Outback LED Fog Light Bracket "These are the files needed to make a bracket to add LED fog lights on a 2013-2019 Subaru Outback. A video tutorial can be viewed at this link.
https://youtu.be/wfj0wofthn0" https://3dcarparts.org/library/2013/Subaru/Outback/led-fog-light-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/fafc3c7c-abe6-474b-ba29-98df014afc6c/images/led-fog-light-bracket-1_1778047808775_5z3hiz.jpg in_stock 17.01 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2013/Subaru/Outback/led-fog-light-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b537c995-7045-4f25-b784-99d2977c7f0c 2020 Subaru Outback Center Console False Bottom "Use this false bottom to hide important belongings in the center console of a 6th generation Subaru Outback. Provides an unsuspecting 12mm of clearance over items like cash, credit cards, or anything else you might want to keep out of sight.
Easily customizable. You can adjust dimensions for a looser or tighter fit. I glued a heavy steal washer to the bottom and use a neodymium magnet to lift it out of place. You could also attach a fabric tab or use a shim to pry it out." https://3dcarparts.org/library/2020/Subaru/Outback/center-console-false-bottom https://r2-upload.3dcarparts.workers.dev/file/parts/b537c995-7045-4f25-b784-99d2977c7f0c/images/center-console-false-bottom-1_1778047799234_164txt.jpg in_stock 20.72 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Subaru/Outback/center-console-false-bottom?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8071f7b-6254-49d6-b099-9d4e1b12d436 2008 Subaru Legacy 52mm Vent Gauge Pod "This is a no cutting required 52mm gauge pod that I designed for my 08 LGT
Remove the vent assembly from the left of the wheel as one piece (don't try to pop just the cover off it will snap. Ask me how I know)
Remove the fins that control the direction of the air
Route wiring as you will have ample access with the vent removed
Install the gauge pods into the corresponding holes from the fins
Reinstall and press the gauge into place
Enjoy" https://3dcarparts.org/library/2008/Subaru/Legacy/52mm-vent-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/c8071f7b-6254-49d6-b099-9d4e1b12d436/images/52mm-vent-gauge-pod-1_1778047795437_s79pqc.jpg in_stock 10.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Legacy/52mm-vent-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4546156a-65cf-4a47-84cc-f3ebf0fe70e0 2023 Subaru Outback Center Console Divider "compartments are designed to hold
- several pens in the large compartment
- a compartment for Ear buds
- a compartment for-business cards
- 3 additional compartments
Run at 99% scale if you want to avoid sanding" https://3dcarparts.org/library/2023/Subaru/Outback/center-console-divider https://r2-upload.3dcarparts.workers.dev/file/parts/4546156a-65cf-4a47-84cc-f3ebf0fe70e0/images/center-console-divider-1_1778047792250_vvajrw.jpg in_stock 29.07 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2023/Subaru/Outback/center-console-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0a0875b7-993b-4e9b-8dfb-fa15a4db4037 2011 Subaru Outback Cupholder Divider Organizer This part is a cupholder divider for a 2011 Subaru Outback. The divider has slots for a pencil & chapstick plus a little cutout for general storage. Print standing up on the build plate. I printed in standard gray PLA and it's been fine; but consider a different material if you live in a hot climate. https://3dcarparts.org/library/2011/Subaru/Outback/cupholder-divider-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/0a0875b7-993b-4e9b-8dfb-fa15a4db4037/images/cupholder-divider-organizer-1_1778047787762_q2jgha.jpg in_stock 21.33 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Outback/cupholder-divider-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fb45708a-fc81-4a99-88c1-0540d88abca9 2011 Subaru Outback Seat Protector Clip (Female) "Replacement clip (female) for the all-weather covering in a Subaru Outback (this was specifically a 2011). The male portion of the clip that has a screw-like portion was intact, but the female sides had broken.
Metric units used. The clip should end up being around 25mm in diameter." https://3dcarparts.org/library/2011/Subaru/Outback/seat-protector-clip-female https://r2-upload.3dcarparts.workers.dev/file/parts/fb45708a-fc81-4a99-88c1-0540d88abca9/images/seat-protector-clip-female-1_1778047784316_axbkxu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Outback/seat-protector-clip-female?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3823352c-425a-4e46-ad24-1a1f7effd104 2003 Subaru Legacy Cupholder Insert I didn't like how loosely normal-sized coffee/soda cups fit in my cupholder so I designed this insert. It fits standard coffee cups as well as my keepcup, drive-thru soft drink cups, etc. and snaps in place in the same way as the original cupholder. https://3dcarparts.org/library/2003/Subaru/Legacy/cupholder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/3823352c-425a-4e46-ad24-1a1f7effd104/images/cupholder-insert-1_1778047780685_huci24.jpg in_stock 30.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Subaru/Legacy/cupholder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-50a5717d-7684-4f12-af7d-276a2d97024c 2010 Subaru Outback Console Tray "Console tray for 4th Generation (2010-2017) Subaru Outback. I modeled the original part, but without the blank for the ejector switch (or whatever the higher trim level comes with).
Original tray was sized to fit 2009 cell phones and mine was always sliding out on turns. The new one is wider and has an adjustable depth.
I printed a deep one for me, uploaded a shallow one here. Contact me if you want something else.
Thingiverse appears to be mangling the pics so here's the full album: https://imgur.com/a/uFnBTBM" https://3dcarparts.org/library/2010/Subaru/Outback/console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/50a5717d-7684-4f12-af7d-276a2d97024c/images/console-tray-1_1778047777288_zbo1pk.jpg in_stock 21.42 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Subaru/Outback/console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-93d8b2f6-51a9-48d9-9c99-17320261df40 2010 Subaru Outback Nilight 4-Gang Switch Box Mount "As I was installing my roof lights on my 2012 Subaru Outback, I was trying to figure out where to mount the switchbox for them. I discovered that I could remove a cubby from the center console and decided to make a bracket to replace that cubby with the switchbox.
*** This bracket only holds the Nilight 4-gang Switch Box ***
Fits:
2010-2012 Subaru Outback
2010-2014 Subaru Legacy
Installation:
1. Remove the front panel. This video demonstrates it well: https://www.youtube.com/watch?v=6lx1XpflgZE&t=101s
2. Remove the cubby that comes with that panel via 4 philips head screws. (Save these screws, as this design uses OEM hardware)
3. Replace the panel with the 3D Printed bracket
4. Reinstall the front panel with the new bracket attached.
Feel free to ask any more questions you may have in the comments." https://3dcarparts.org/library/2010/Subaru/Outback/nilight-4-gang-switch-box-mount https://r2-upload.3dcarparts.workers.dev/file/parts/93d8b2f6-51a9-48d9-9c99-17320261df40/images/nilight-4-gang-switch-box-mount-1_1778047773867_y1lt14.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2010/Subaru/Outback/nilight-4-gang-switch-box-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a2263fbf-4de2-4d6f-b2e7-4acf7326b29a 2003 Subaru Legacy Headlight Washer Cover Holder Subaru legacy/outback 2003-2009 headlight wash cover holder https://3dcarparts.org/library/2003/Subaru/Legacy/headlight-washer-cover-holder https://r2-upload.3dcarparts.workers.dev/file/parts/a2263fbf-4de2-4d6f-b2e7-4acf7326b29a/images/headlight-washer-cover-holder-1_1778047770008_ukekod.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Subaru/Legacy/headlight-washer-cover-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ab9d84f2-c699-4d0a-a6d7-4c9d85f30714 2015 Subaru Legacy/Outback Audio Auxiliary Jack Replacement Panel "Designed for use with aftermarket stereos in 2015-2017 Subaru Legacy and Outback models to replace the factory Aux and USB module ([Subaru part # 86257AL00A](https://parts.subaru.com/p/60018578/86257AL00A.html))
The dimensions of the factory part are only just large enough for 3 Keystone sockets. The middle socket is flipped to reduce conflict between the retention tabs on adjacent Keystone jacks, since not all are made to fit so closely together.
Many (if not most) aftermarket stereos, even top-end flagship models, do not support USB hubs on their rear USB ports. Since these stereos often have several types of rear inputs and often no front USB inputs, it gets messy or awkward to have cables running between interior panels. This solution allows a neat and customizable way to route those rear inputs to a factory location." https://3dcarparts.org/library/2015/Subaru/Legacy%2FOutback/audio-auxiliary-jack-replacement-panel https://r2-upload.3dcarparts.workers.dev/file/parts/ab9d84f2-c699-4d0a-a6d7-4c9d85f30714/images/audio-auxiliary-jack-replacement-panel-1_1778047766873_ssqmt2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Subaru/Legacy%2FOutback/audio-auxiliary-jack-replacement-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3341b6c2-5b9f-40ff-8b7a-ca1fe1d6b52a 2010 Subaru Outback Center Console Organizer Center console organizer made to fit in a gen 4 outback https://3dcarparts.org/library/2010/Subaru/Outback/center-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/3341b6c2-5b9f-40ff-8b7a-ca1fe1d6b52a/images/center-console-organizer-1_1778047763415_hyv7i5.jpg in_stock 22.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Subaru/Outback/center-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-985444f9-e654-4c90-b353-6fbac9ecdf7e 2011 Subaru Legacy Outback Trunk Cover Support Peg "This is the support peg for the trunk cover on a Subaru Legacy Outback 2011 (4th gen). This is for the spring loaded side (right side).
The shape is the same on the opposite side except the shaft would be different (larger diameter, no clips on the side and would need a locating rib on the top. If you need one of those, feel free to take the rest of the geometry from this file.
Tested on a European Outback 2011 2.0D (diesel engine) model. I assume it is the same across all variants of the same year at least though.
This is also uploaded on PrusaPrinters at https://www.prusaprinters.org/prints/86577-subaru-legacy-outback-2011-4th-gen-trunk-cover-sup
## Notes on the source file
The source file is attached. It uses FreeCAD Link branch daily (downloads from https://github.com/realthunder/FreeCAD_assembly3). The file will not work on FreeCAD 0.19.
As an alternative for users working in other CAD software, a STEP file is also provided. A 3MF file is provided with the slicer settings I used in PrusaSlicer." https://3dcarparts.org/library/2011/Subaru/Legacy%20Outback/trunk-cover-support-peg https://r2-upload.3dcarparts.workers.dev/file/parts/985444f9-e654-4c90-b353-6fbac9ecdf7e/images/trunk-cover-support-peg-1_1778047758974_rw68m9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Legacy%20Outback/trunk-cover-support-peg?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f50dc7a-dab1-426f-a056-694575d93efe 2009 Subaru Impreza Center Console Coin Holder Standard US size coin holder, with additional compartment for pens/pencils. Should fit quite snug in 2009 Subaru Impreza Center Console. https://3dcarparts.org/library/2009/Subaru/Impreza/center-console-coin-holder https://r2-upload.3dcarparts.workers.dev/file/parts/8f50dc7a-dab1-426f-a056-694575d93efe/images/center-console-coin-holder-1_1778047111856_2wn97o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Subaru/Impreza/center-console-coin-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f97d437a-9619-4911-ae95-ccf9f2ebcc5d 2002 Subaru Impreza Dash Gauge Pod "This is my attempt at creating a 3 gauge dash pod to replace the clock on a 2002-2007 Subaru Impreza
I've uploaded both 52 and 60mm
the 60mm includes holes for mounting within gaps on the dash pad with screws and clips, and the alarm led - use the holes as a guide as they are slightly undersized to drill out for final placement, the front 2 seem about right and rear I would suggest opening up the holes towards the center of the pod.
I Strongly recommend ASA or ABS as the heat with warp PETG in summer
I used m3x30 screws with the clips and washers to neaten the install
You will likely need to sand down all the gauge holes as they too are a very snug fit on my printer and need a dremel after paint
Final print in first pic, I'm very happy with the fit!" https://3dcarparts.org/library/2002/Subaru/Impreza/dash-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/f97d437a-9619-4911-ae95-ccf9f2ebcc5d/images/dash-gauge-pod-1_1778047106673_eomxc8.jpg in_stock 33.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Impreza/dash-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dd44a379-251d-4147-b2d0-73e418c06c93 2008 Subaru Impreza Speaker Adapter "Speaker adapter for a 2008-2014 Subaru Impreza/WRX/STi. The outer holes screw into the factory 3-hole mounting locations, and the inner holes are 4 holes, 157mm across opposing holes.
These work for the front speakers, I have not confirmed fitment for the rear speakers. I installed these in my 2011 Subaru STi, but it should work for any Impreza-based car from that generation ('08-14). The aftermarket holes were sized for Kicker 48ESC65.
Due to the shape of the door panel and the gap for the aftermarket speaker, I added foam in between the speaker and the adapter, and between the adapter and the door. I recommend you do the same, I just picked up a sheet of multi purpose foam from a hobby shop." https://3dcarparts.org/library/2008/Subaru/Impreza/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/dd44a379-251d-4147-b2d0-73e418c06c93/images/speaker-adapter-1_1778047102264_cmakgb.jpg in_stock 9.24 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Impreza/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f19b1391-343e-4e3b-9cef-95c36b45071e 2010 Subaru Impreza Headlight Washer Cover Bracket "Clip to hold the headlight washer cover on for a Subaru Impreza (2010 model).
Depending on your tolerances, you might need to trim it down slightly with a stanley knife. Holding firm on my car now though.
Note: For installation it is easier to pull the receptacle forward (out of the car a little), fit the bracket and then attach the cover to the bracket. Then just push everything back inward." https://3dcarparts.org/library/2010/Subaru/Impreza/headlight-washer-cover-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/f19b1391-343e-4e3b-9cef-95c36b45071e/images/headlight-washer-cover-bracket-1_1778047098799_lho1dc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Subaru/Impreza/headlight-washer-cover-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8198c2a-4bf6-4766-a439-5a7e4dae1d99 1998 Subaru Impreza Front Bumper Grille (Left) Design for a left grill of Subaru STI v5 front bumper https://3dcarparts.org/library/1998/Subaru/Impreza/front-bumper-grille-left https://r2-upload.3dcarparts.workers.dev/file/parts/c8198c2a-4bf6-4766-a439-5a7e4dae1d99/images/front-bumper-grille-left-1_1778047095170_617ryx.jpg in_stock 9.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Subaru/Impreza/front-bumper-grille-left?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-774dce6e-8d0b-4ba7-8bc0-d38ca2f09bb2 2004 Subaru Impreza Taillight Clip "designed a replacement passenger side taillight clip to replace a worn-out one, can flip for drivers side.
Printing:
Flat on bed with support to account for offset mounting tab.
100% infill PETG
Subaru P# 84927FE240
flip for P# 84927FE250" https://3dcarparts.org/library/2004/Subaru/Impreza/taillight-clip https://r2-upload.3dcarparts.workers.dev/file/parts/774dce6e-8d0b-4ba7-8bc0-d38ca2f09bb2/images/taillight-clip-1_1778047091666_9u76k0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Subaru/Impreza/taillight-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-26e666df-1dec-48d4-8289-696e3383db85 2005 Subaru Impreza HVAC Control Gauge Pod "This is a model to convert the HVAC controls to 3 gauge pods. It is a direct bolt on. I 3D printed it and fit it to my 05 STI but it should fit other models.
Gauges are a snug fit so some filing might be required." https://3dcarparts.org/library/2005/Subaru/Impreza/hvac-control-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/26e666df-1dec-48d4-8289-696e3383db85/images/hvac-control-gauge-pod-1_1778047086531_67oi8g.jpg in_stock 21.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Subaru/Impreza/hvac-control-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5afaa3eb-d144-45c4-84c5-e120e3bc87bb 2008 Subaru Impreza Sun Visor Clip Will also fit Impreza WRX '08-'14 https://3dcarparts.org/library/2008/Subaru/Impreza/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5afaa3eb-d144-45c4-84c5-e120e3bc87bb/images/sun-visor-clip-1_1778047081138_40api8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Impreza/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf941202-ac89-441a-bf66-04798bbe0680 1993 Subaru Impreza Windshield Wiper Arm Cap This is a Windshield Wiper Cap to hide the wiper attachment bolt designed to fit on a 2002 WRX. It matches the part number 86538SA020 and is for model years 1993 to 2007. https://3dcarparts.org/library/1993/Subaru/Impreza/windshield-wiper-arm-cap https://r2-upload.3dcarparts.workers.dev/file/parts/cf941202-ac89-441a-bf66-04798bbe0680/images/windshield-wiper-arm-cap-1_1778047077464_1uh7px.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Subaru/Impreza/windshield-wiper-arm-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-49035910-cd1b-46d7-9602-2a3a6571a4a7 2022 Subaru Impreza Coin Tray "Another quick design for a MY22 Subaru Impreza centre console coin tray. Tried to find an STL for my vehicle and couldn't, so made my own.
Printed with PETG-CF with Tree Supports." https://3dcarparts.org/library/2022/Subaru/Impreza/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/49035910-cd1b-46d7-9602-2a3a6571a4a7/images/coin-tray-1_1778047073877_njlder.jpg in_stock 25.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Subaru/Impreza/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ad85ad2c-f820-41a1-b24e-a22cca4172c3 2003 Subaru Impreza Headlight Cover "bigger cover for subaru impreza gd/gg blobeye when led lights installed. old sealrings must be reused.
printed with petg cf" https://3dcarparts.org/library/2003/Subaru/Impreza/headlight-cover https://r2-upload.3dcarparts.workers.dev/file/parts/ad85ad2c-f820-41a1-b24e-a22cca4172c3/images/headlight-cover-1_1778047069991_la364k.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2003/Subaru/Impreza/headlight-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8cfda953-403a-4808-9e44-70734bfbbf27 1999 Subaru Impreza Front Speaker Adapter "I found some models here but none is fitting in the front doors of my Impreza '99 car :/
So, with my poor knowledge, i decided to start my own adapter as i could, but finally get something decent, and nowadays i have two new speakers in my front doors ;)
It will fit in 99/00 models, but also 1996 ones i guess.
I decided to use PETG because PLA is risky when it's hot outside.
Notice: on one picture, I put a screw at its wrong place (on the left), of course the choice is free ;)" https://3dcarparts.org/library/1999/Subaru/Impreza/front-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/8cfda953-403a-4808-9e44-70734bfbbf27/images/front-speaker-adapter-1_1778047065434_2hq7tp.jpg in_stock 20.44 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1999/Subaru/Impreza/front-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cca2e253-7566-4d9b-b693-76e00979c63e 2013 Subaru Impreza Aftermarket Microphone Bracket "This is a retention bracket designed to hold an aftermarket mic, from a kenwood dmx7704s stereo, in the factory mic location on the 2013 Subaru Impreza hatchback using the stock mounting screws.
During the install process, I moved the factory mic out of the way and tucked it into the headliner since the mic appears to be wired inline with the power for the lights and I didn't feel like making any permanent changes. This bracket is a little larger than it should be for this particular mic but I was unable to hear any rattling while driving so it's holding it in place well enough
I printed this part in PETG since I live in Texas and it'll be in a location that can reach temperatures that would easily deform PLA." https://3dcarparts.org/library/2013/Subaru/Impreza/aftermarket-microphone-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/cca2e253-7566-4d9b-b693-76e00979c63e/images/aftermarket-microphone-bracket-1_1778047061587_ss7k2i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Subaru/Impreza/aftermarket-microphone-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40d7eacf-ed5f-4144-8d24-2b99c9190e8a 1992 Subaru Impreza Hood Stay Rod Grommet My grommet went bad so i designed my own, this is an work in progress and see if TPU is the material to use. https://3dcarparts.org/library/1992/Subaru/Impreza/hood-stay-rod-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/40d7eacf-ed5f-4144-8d24-2b99c9190e8a/images/hood-stay-rod-grommet-1_1778047056775_phwjjv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1992/Subaru/Impreza/hood-stay-rod-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-92ecd01e-6e00-4fe3-8136-d36aa52ee50c 1992 Subaru Impreza Side Skirt Grommet "This part replaces the original screw insert grommet to hold the sideskirts on. Like the title, this part replicates part no. 96056FA010
When printing, I would recommend a 0.4mm nozzle and original size to work the best
I use a standard 10mm bolt with a washer, no need to drill it or tap it
Perfect fit for the original square holes, no need for sanding (Tested on 1999 2.5RS GM6)
Update: Ive used these as a direct replacement for nearly a year now and they are holding up fine being printed from cheap pla." https://3dcarparts.org/library/1992/Subaru/Impreza/side-skirt-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/92ecd01e-6e00-4fe3-8136-d36aa52ee50c/images/side-skirt-grommet-1_1778047052086_ga2une.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1992/Subaru/Impreza/side-skirt-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-be1e7c6c-1937-44bf-a878-40b1b4d5ba1d 1993 Subaru Impreza Sun Visor Clip "Sunvisor clip for 1993-2001 Subaru Impreza.
Sunvisor clips regularly break, couldn't find a design already so I measured one and designed a replacement.
For strength the clip should be printed on it's side with supports enabled." https://3dcarparts.org/library/1993/Subaru/Impreza/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/be1e7c6c-1937-44bf-a878-40b1b4d5ba1d/images/sun-visor-clip-1_1778047047557_21ktri.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Subaru/Impreza/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b354f7cf-b97f-474c-9625-ddac132ce573 2013 Subaru Impreza Hood Clip "Made slight modifications to make it fit a 2013 Subaru Impreza Printed in PETG 100% infill
have both STL and 3MF" https://3dcarparts.org/library/2013/Subaru/Impreza/hood-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b354f7cf-b97f-474c-9625-ddac132ce573/images/hood-clip-1_1778047043293_ll4zcz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Subaru/Impreza/hood-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bbec6bc5-237a-4059-aed8-63529186b061 2006 Subaru Forester Single DIN Pocket & Flat Face Panel "Two models included:
- for a 1 DIN sized pocket
- for a 1 DIN sized flat-face (you can add holes to your liking by either editing the model or drilling/cutting in the final print)
The models were designed to fit in the slot for the 2DIN radio of a 2006 to 2008 Subaru Forester.
The design is a modification if user *Diedtrying*'s general purpose 1 DIN Pocket" https://3dcarparts.org/library/2006/Subaru/Forester/single-din-pocket-flat-face-panel https://r2-upload.3dcarparts.workers.dev/file/parts/bbec6bc5-237a-4059-aed8-63529186b061/images/single-din-pocket-flat-face-panel-1_1778046516108_tjgkti.jpg in_stock 37.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Subaru/Forester/single-din-pocket-flat-face-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-360b2e78-95be-436e-a3f2-74b4096ff681 2005 Subaru Outback Cargo Net Clip "My 2008 Subaru Outback was missing the clip on one side to hold the cargo net up. So I made this as a replacement.
Seems to work well!" https://3dcarparts.org/library/2005/Subaru/Outback/cargo-net-clip https://r2-upload.3dcarparts.workers.dev/file/parts/360b2e78-95be-436e-a3f2-74b4096ff681/images/cargo-net-clip-1_1778046511065_jsjpoh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Subaru/Outback/cargo-net-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fcaa14d5-ab49-42ac-bb20-d56fd8b31d96 1979 Subaru Wagon Door Lock Rod Clip "This is a ""door lock rod clip"" I designed for my 1979 subaru wagon incase it broke while trying to put it back on, it didn't but incase it did I didn't want to spend the $1.50 to get a new one damn it! Probably works on tons of other cars but I designed it specifically for my 79 subaru." https://3dcarparts.org/library/1979/Subaru/Wagon/door-lock-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/fcaa14d5-ab49-42ac-bb20-d56fd8b31d96/images/door-lock-rod-clip-1_1778046507582_w8i8ig.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Subaru/Wagon/door-lock-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0cfff15f-c349-48ed-9eb4-0bae33f17e11 2015 Subaru WRX/STI Ceiling Grab Handle Clip "When wrapping the roof on my 2018 WRX, I had to drop the headliner to remove the shark fin. In the process, I broke one of the clips that holds the ceiling grab handles on.
There's no other way to get a replacement, so I made my own. Printed in ABS and used it all summer. Works great.
I also sell them on Ebay here https://www.ebay.com/itm/2015-2018-Subaru-WRX-STI-Ceiling-Handle-Clip-Replacement/263606046044" https://3dcarparts.org/library/2015/Subaru/WRX%2FSTI/ceiling-grab-handle-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0cfff15f-c349-48ed-9eb4-0bae33f17e11/images/ceiling-grab-handle-clip-1_1778046503471_ufu90u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Subaru/WRX%2FSTI/ceiling-grab-handle-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-80f92446-93cc-487f-8ca5-c50e2d94ed71 2003 Subaru Forester Switch Mounting Bracket (Ashtray Replacement) "This bracket is designed to work on a 2003-2008 SG Subaru Forester. As shown in the picture, it allows one to mount the Nilight switch bracket (linked below) in place of the ashtray compartment. It can only can fit the 5 switch design that Nilight sells; linked is the 4 switch with the 5th spot containing USB ports: https://www.amazon.com/dp/B0BF9T5T7Q
The two parts were printed separately on a Bambu Labs A1 Mini in PETG (see printing notes).
See the CAD here: https://cad.onshape.com/documents/7e6b3c27756973fdf3cee8ba/w/2f79282b3a4250ade50b88db/e/56397ebc87136586a807e5d4?renderMode=0&uiState=670380c30e2a684a47a5521a
*Note:* I know that the CAD was not made in the best way for ease of use. I made the two halves to mate with one another, and each relies on dimensions from the other. A better way to have made it would have been to design the two in separate part files and use an assembly to join the two.
*P.S.* the switches they provide are for controlling relays, not for controlling anything directly. You will have to buy a relay box, mount it somewhere, and wire the switches to the relays and the relays to your accessories.
**Disclaimer:** This mount was only tested on a 2003 Subaru Forester XS Premium. In theory, it should work with all SG Foresters, but it has not been verified." https://3dcarparts.org/library/2003/Subaru/Forester/switch-mounting-bracket-ashtray-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/80f92446-93cc-487f-8ca5-c50e2d94ed71/images/switch-mounting-bracket-ashtray-replacement-1_1778046498178_spmuxi.jpg in_stock 8.12 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Subaru/Forester/switch-mounting-bracket-ashtray-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7b293259-96b6-41d2-9d96-934feb125af5 2002 Subaru WRX Armrest Latch Clip This is a replacement armrest clip for the WRX 2002. Move over all hardware from your older/broken clip and install this clip in its place. https://3dcarparts.org/library/2002/Subaru/WRX/armrest-latch-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7b293259-96b6-41d2-9d96-934feb125af5/images/armrest-latch-clip-1_1778046492660_d4c654.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/WRX/armrest-latch-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-10bc4bea-fb8f-45d5-8313-4eaeacf31147 2014 Subaru Forester Cup Holder Adapter "I got frustrated with how poorly my 24oz Bubba coffee mug fit in my wife's car so I designed an adaptor. Hers is a 2018 Forester but it probably works for 2014-2018 model years and possibly other Subaru vehicles.
Support structure designed in but you still need to use supports to bridge the gap between the two pieces for it to work." https://3dcarparts.org/library/2014/Subaru/Forester/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/10bc4bea-fb8f-45d5-8313-4eaeacf31147/images/cup-holder-adapter-1_1778046487935_7lhrnf.jpg in_stock 20.69 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Subaru/Forester/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5362acb8-20e6-427a-aa18-9b95b3c97713 2009 Subaru Forester Coin Holder Needed a place to keep coins for parking meters. There were a couple of designs available but they included pennies which I don't need and were a bit tall for what I was looking for. This mounts in the little pocket next to the square cup holders. Printed in PETG. Designed in SolidWorks. https://3dcarparts.org/library/2009/Subaru/Forester/coin-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5362acb8-20e6-427a-aa18-9b95b3c97713/images/coin-holder-1_1778046480940_uhbi1z.jpg in_stock 19.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Subaru/Forester/coin-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fabd104d-aaec-4a26-bb04-27a8171eba2b 2005 Subaru Impreza Hood Prop Clip "This is a direct-replacement for the hood prop clip off of a 2005 Saab 9-2X or Subaru Impreza. The part may fit other model years as well (likely '03 to '06ish). Mine had broken a while ago and I just got the inspiration to fix it.
The print is fairly straightforward and has a flat side to orient onto the build surface.
Make sure to print with a high temperature filament (ABS, PETG, etc) as the engine bay may become warm enough to soften other materials." https://3dcarparts.org/library/2005/Subaru/Impreza/hood-prop-clip https://r2-upload.3dcarparts.workers.dev/file/parts/fabd104d-aaec-4a26-bb04-27a8171eba2b/images/hood-prop-clip-1_1778046476668_4873bf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Subaru/Impreza/hood-prop-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aa3f0a9a-39e5-46cc-b4d5-7e75ce9bdd21 1998 Subaru Forester Dog Guard Pet Barrier Support "Support for the metal protection barrier for a Subaru Forester SF (gen 1).
In my case, when purchasing the vehicle it came with the grille but without the supports to anchor it to the roof." https://3dcarparts.org/library/1998/Subaru/Forester/dog-guard-pet-barrier-support https://r2-upload.3dcarparts.workers.dev/file/parts/aa3f0a9a-39e5-46cc-b4d5-7e75ce9bdd21/images/dog-guard-pet-barrier-support-1_1778046473430_3s95y7.jpg in_stock 23.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Subaru/Forester/dog-guard-pet-barrier-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d40b758e-2cb7-4edf-ae4b-7032ddc49e48 2005 Subaru Forester Center dash storage cubby with USB port This is for an sg Forester facelift model. Maybe it fits the pre facelift also, I don't know for sure. This is the USB connector I used: https://www.amazon.nl/dp/B07DDB2L5N https://3dcarparts.org/library/2005/Subaru/Forester/center-dash-storage-cubby-with-usb-port https://r2-upload.3dcarparts.workers.dev/file/parts/d40b758e-2cb7-4edf-ae4b-7032ddc49e48/images/center-dash-storage-cubby-with-usb-port-1_1778046468441_0ao5p0.jpg in_stock 30.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Subaru/Forester/center-dash-storage-cubby-with-usb-port?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-456f83fc-590f-44ac-864c-747d79c2014f 2011 Subaru Outback Fuse Box Clip My 2011 Subaru Outback was missing both clips for the cabin fuse box. I modeled this from one that was on my 2017 Outback, so I imagine there are a lot of years/models that use this same clip. I printed it in PLA, flattest side down (with supports because of where the retaining nub is located). https://3dcarparts.org/library/2011/Subaru/Outback/fuse-box-clip https://r2-upload.3dcarparts.workers.dev/file/parts/456f83fc-590f-44ac-864c-747d79c2014f/images/fuse-box-clip-1_1778046462480_5qgih5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2011/Subaru/Outback/fuse-box-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ce90e61f-f395-4b61-9449-5bca540f7d40 2013 Subaru Forester Positive Battery Terminal Cover Positive terminal cover for a 2013 Subaru Forester . https://3dcarparts.org/library/2013/Subaru/Forester/positive-battery-terminal-cover https://r2-upload.3dcarparts.workers.dev/file/parts/ce90e61f-f395-4b61-9449-5bca540f7d40/images/positive-battery-terminal-cover-1_1778046458918_mslsew.jpg in_stock 8.65 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2013/Subaru/Forester/positive-battery-terminal-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4806953b-0a84-4626-99d9-46122ac4c708 2002 Subaru Impreza Hood Prop Clip "Replacement for a 2002 Subaru WRX hood prop catch
Included a copy of the OEM clip that requires supports and a simplified version that can be printed without support.
Used 3 perimeters and solid infill
Recommend PETG or ASA in order to better tolerate the heat." https://3dcarparts.org/library/2002/Subaru/Impreza/hood-prop-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4806953b-0a84-4626-99d9-46122ac4c708/images/hood-prop-clip-1_1778046453788_6dzp9c.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Subaru/Impreza/hood-prop-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e487321-21dc-459f-ba8e-37a4a0cd8ace 1998 Subaru Legacy Hood Support Rod Latch Clip The clip that holds the hood support rod in the stowed position was broken on the 98 Subaru Legacy Outback. PLA would likely melt in the engine bay, so I printed in ABS. Pictured item was printed with a 0.8mm nozzle. https://3dcarparts.org/library/1998/Subaru/Legacy/hood-support-rod-latch-clip https://r2-upload.3dcarparts.workers.dev/file/parts/1e487321-21dc-459f-ba8e-37a4a0cd8ace/images/hood-support-rod-latch-clip-1_1778046448609_301d9c.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1998/Subaru/Legacy/hood-support-rod-latch-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9347fef1-71bc-4ebb-94aa-00ffcd938b8a 2004 Subaru Forester Fan Control Knob "Fan control knob for a 2004 Subaru Forester. Presumably fits other years and models as well.
Print in two parts, glue together
Use a 0.4mm nozzle so that the inner diameter is sized correctly" https://3dcarparts.org/library/2004/Subaru/Forester/fan-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/9347fef1-71bc-4ebb-94aa-00ffcd938b8a/images/fan-control-knob-1_1778046443990_0brql6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Subaru/Forester/fan-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9fe57eb6-cbe7-4916-9cf0-8fe32b660ac1 2019 Subaru Forester Speaker Adapter "Rather print them in ABS, maybe pla is to soft in summer (hot plases),
Attached are:
rear left (named by error rear right), is for 5.5"" with twitter,
Front right, for speaker 6x9, your speaker should not be taller than 4.5"", otherwise magnet will hit the window.
Make mirror of the STL for the other sides.
Feel free to modify it, attached are files for Solidworks." https://3dcarparts.org/library/2019/Subaru/Forester/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/9fe57eb6-cbe7-4916-9cf0-8fe32b660ac1/images/speaker-adapter-1_1778046436330_e9rjcr.jpg in_stock 18.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Subaru/Forester/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0d7c96f4-4ae8-4fdf-ba4c-30de32a4ded3 2009 Subaru Forester Centre Console Divider "Centre divider for the console next to handbrake area.
I lost the removable ""wall"" so quickly knocked this up..
Fits fine, but doesnt stack on the other divider unfortunately." https://3dcarparts.org/library/2009/Subaru/Forester/centre-console-divider https://r2-upload.3dcarparts.workers.dev/file/parts/0d7c96f4-4ae8-4fdf-ba4c-30de32a4ded3/images/centre-console-divider-1_1778046430284_oz4bvd.jpg in_stock 22.47 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Subaru/Forester/centre-console-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1c66ba8f-5aec-4ed1-8311-aff0b12ab679 2008 Subaru Forester Trunk Panel Hole Cover A small hole in my trunk door has been bothering me for the longest time - time to fill it! https://3dcarparts.org/library/2008/Subaru/Forester/trunk-panel-hole-cover https://r2-upload.3dcarparts.workers.dev/file/parts/1c66ba8f-5aec-4ed1-8311-aff0b12ab679/images/trunk-panel-hole-cover-1_1778046426585_436hom.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Forester/trunk-panel-hole-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ac0b5d03-67e7-4802-9187-9c64117c118c 2026 Subaru Forester Console Tray "The new 2026 Subaru Forester doesn't come with or have available for it a tray for the center console. If you have small things that you'd like to have closer to hand than the bottom of the tray, this is the print for you.
I printed the tray bottom down with standard supports for the tabs on the side. This took a good amount of scraping and sanding under the tabs to get smooth. If i did it again, i might print it top down, since the insert will cover any roughness from the support.
I also added felt tape i got from amazon on top and bottom of the tabs and to the sides of the tray itself.
I recommend TPU for the insert to keep things from sliding around." https://3dcarparts.org/library/2026/Subaru/Forester/console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/ac0b5d03-67e7-4802-9187-9c64117c118c/images/console-tray-1_1778046418808_71vpje.jpg in_stock 21.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2026/Subaru/Forester/console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6b7f2e20-99be-4d3e-a355-11807062a28c 2015 Subaru Forester CB Radio Mount "Mount to install a Uniden CB mount in place of some decorative trim.
Use a solid print for your final part, mark & pre-drill where the factory trim's clips are and attach with screws.
This part fits a 2015 Forester RHD. It should suit later models.
For LHD users, I *assume* you can flip the model and print but can't say for sure.
I've attached STLs for both single and dual DB holders." https://3dcarparts.org/library/2015/Subaru/Forester/cb-radio-mount https://r2-upload.3dcarparts.workers.dev/file/parts/6b7f2e20-99be-4d3e-a355-11807062a28c/images/cb-radio-mount-1_1778046413247_3n6zom.jpg in_stock 22.53 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Subaru/Forester/cb-radio-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21d401ec-30a7-40e4-bd48-416035ea908f 2002 Subaru Forester Dash Storage with USB and Switch Panel "Subaru Forester sg dash storage with USB and extra switches for lighting or other things. I used these items:
Switches: https://nl.aliexpress.com/item/1005007348915487.html
USB connector: https://www.amazon.nl/dp/B07DDB2L5N" https://3dcarparts.org/library/2002/Subaru/Forester/dash-storage-with-usb-and-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/21d401ec-30a7-40e4-bd48-416035ea908f/images/dash-storage-with-usb-and-switch-panel-1_1778046408465_n41ppm.jpg in_stock 37.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Forester/dash-storage-with-usb-and-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dfdc94a0-20e7-44fd-90e5-3c42735512f3 2006 Subaru Legacy Cargo Cover Clip Clips for the little cargo cover for trunk. https://3dcarparts.org/library/2006/Subaru/Legacy/cargo-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/dfdc94a0-20e7-44fd-90e5-3c42735512f3/images/cargo-cover-clip-1_1778046405258_d6o8xm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Subaru/Legacy/cargo-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3a50e12b-3c64-45a8-b818-7a8a78d06fef 1992 Subaru SVX Sleeve Lock Regulator Clip "This is a Subaru SVX compatible window sleeve lock regulator clip (related to Subaru part number 62101PA081).
Please let me know how this works for you. I will collect feedback and improve the design over time. Note, the part has been re-enforced around a common failure area, and is larger than the original, although this doesn't effect fitment and operation.
While it will work if printed in PLA or ABS, I would recommend printing it nylon to match the original. Since printing in nylon isn't super common I've put on one shapeways:
https://www.shapeways.com/product/2DFGLG92V/subaru-svx-sleeve-clip-v02-011
The shapeways quality is higher than I've been able to get at home, so I use those on my car." https://3dcarparts.org/library/1992/Subaru/SVX/sleeve-lock-regulator-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3a50e12b-3c64-45a8-b818-7a8a78d06fef/images/sleeve-lock-regulator-clip-1_1778046401517_y6veya.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1992/Subaru/SVX/sleeve-lock-regulator-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b9d583ee-6a12-46c1-a802-375cc21e0188 1990 Subaru Brumby Visor Clip I made this visor clip for my 1990 brumby as the stock ones where falling apart and no longer served there purpose, i couldnt find any online to buy so i just made my own copy. This model was version 4, and most likely wont recive any updates in the future. Super easy to install just remove old ones and screw these ones in. Might have to sand the slip part to fit a little more stock but with out sanding it fits super snug. Print takes about 1 hour with my settings ofc you can put infill lower which will decrease print time. Other than that hope this works for you! https://3dcarparts.org/library/1990/Subaru/Brumby/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b9d583ee-6a12-46c1-a802-375cc21e0188/images/visor-clip-1_1778046398180_desqq4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Subaru/Brumby/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-59fdc438-c5d5-4386-9b6f-d4020d2d1b4c 2007 Jeep Wrangler Dash Cubby Cover Plate with Ball Mount and USB Port This is a cover to insert in the factory cubby hole that is in a jeep jk with manual windows. It allows for a usb port and a ball mount for a car phone holder. The plate is held in place with two screws using the factory holes in the bottom of the cubby. a hole will need to be drilled in the back of the cubby to allow the usb out. I printed this using PLA on an Ender 3 https://3dcarparts.org/library/2007/Jeep/Wrangler/dash-cubby-cover-plate-with-ball-mount-and-usb-port https://r2-upload.3dcarparts.workers.dev/file/parts/59fdc438-c5d5-4386-9b6f-d4020d2d1b4c/images/dash-cubby-cover-plate-with-ball-mount-and-usb-port-1_1778045866935_ervf5o.jpg in_stock 14.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/dash-cubby-cover-plate-with-ball-mount-and-usb-port?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2fa47e9-b470-4215-8259-e66cb204b999 2007 Jeep Wrangler Center Console Divider "A divider for the center console in the Jeep Wrangler JK
The parts can also be printed together, but insertion must be done one at a time.
For stability, 2 O-rings (195x1) can be inserted around the center piece, into the grooves." https://3dcarparts.org/library/2007/Jeep/Wrangler/center-console-divider https://r2-upload.3dcarparts.workers.dev/file/parts/b2fa47e9-b470-4215-8259-e66cb204b999/images/center-console-divider-1_1778045856382_zyjslg.jpg in_stock 30.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/center-console-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9fee4929-ba35-4155-a8a8-a214476fc042 2003 Subaru Forester Headlight Washer Nozzle "This is the internal part of the headlight washer spray. Mine is the second generation pre-facelift model (2003-2005) but it should also fit the first generation Forester.
I bough the car with one of those missing (apparently the washer got ripped off and the internal part was lost) so I did my best to duplicate the other one. I printed it in ABS with supports and raft, lying on its back (that's the only way to make the spray nozzle print well). Find an o-ring, install it and it seems to work. The underside looks horrible, but only the channel for the o-ring needs to be sanded properly." https://3dcarparts.org/library/2003/Subaru/Forester/headlight-washer-nozzle https://r2-upload.3dcarparts.workers.dev/file/parts/9fee4929-ba35-4155-a8a8-a214476fc042/images/headlight-washer-nozzle-1_1778045848649_radu40.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Subaru/Forester/headlight-washer-nozzle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0b0483d6-4ee3-430e-aaef-f68c1dbc1dde 2004 Subaru Forester Front Under Cover Clip "Clip-under cover, front, 56411FA000
Part 4 on this page:
http://opposedforces.com/parts/forester/en_s11/type_9/body_equipment_exterior/under_cover_and_exhaust_cover/illustration_1/
Subaru Forester SG
'04, April — '05, May
'05, March — '06, May
'06, April — '07, May
'07, March — '07, November
Part usage information
Europe
FORESTER S11
FORESTER S10
IMPREZA G11
IMPREZA G10" https://3dcarparts.org/library/2004/Subaru/Forester/front-under-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0b0483d6-4ee3-430e-aaef-f68c1dbc1dde/images/front-under-cover-clip-1_1778045844534_7id74n.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Subaru/Forester/front-under-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5d3ee528-6175-4bba-9acc-d5798a0e9eaf 2004 Subaru Forester Bonnet Stay Clip A printer friendly version of pimaster's [2004 Subaru Forester Bonnet Stay Clip](https://www.thingiverse.com/thing:213626) https://3dcarparts.org/library/2004/Subaru/Forester/bonnet-stay-clip-2 https://r2-upload.3dcarparts.workers.dev/file/parts/5d3ee528-6175-4bba-9acc-d5798a0e9eaf/images/bonnet-stay-clip-2-1_1778045840478_idwhzo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Subaru/Forester/bonnet-stay-clip-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b594dd31-243a-4eda-8143-daf81d3bbd09 2009 Subaru Forester Triple Gauge Mount "Designed to fit Subaru forester 2009
Fits onto the center dash lid.
Template is for drilling the holes.
Attaches with 4 M4 screws" https://3dcarparts.org/library/2009/Subaru/Forester/triple-gauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/b594dd31-243a-4eda-8143-daf81d3bbd09/images/triple-gauge-mount-1_1778045832523_gpygng.jpg in_stock 34.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Subaru/Forester/triple-gauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ea8319b5-7d08-4f19-8a75-bcf6b14f3dcb 2002 Subaru Forester Center Console Latch "Replaces broken center console latch for 2nd Gen Subaru Foresters.
It may also work on other gen's or other models but I don't own one so I cannot confirm.
Near 1:1 for the NF4 307P part I pulled out of my car. I didn't optimize this in any way so there really isn't a great way to print it. Worked great anyways.
I printed this on a Markforged. I also printed one in solid PLA on my creality cr-10 and it worked fine." https://3dcarparts.org/library/2002/Subaru/Forester/center-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/ea8319b5-7d08-4f19-8a75-bcf6b14f3dcb/images/center-console-latch-1_1778045822695_of2r38.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Forester/center-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6edffc0c-de7a-4c10-a9a5-95239b2c599e 1997 Subaru Forester Front Pivot Lamp Assembly Mounting Bolt Front marker light mounting bolt for Subaru Forester 1997-1999 84957-FA000 https://3dcarparts.org/library/1997/Subaru/Forester/front-pivot-lamp-assembly-mounting-bolt https://r2-upload.3dcarparts.workers.dev/file/parts/6edffc0c-de7a-4c10-a9a5-95239b2c599e/images/front-pivot-lamp-assembly-mounting-bolt-1_1778045818771_r13de1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1997/Subaru/Forester/front-pivot-lamp-assembly-mounting-bolt?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9c93db17-1084-4926-a757-f44730cc41c7 2004 Subaru Forester Speaker Adapter "This is a front speaker adapter for 2004 Subaru forester, should fit some other years as well. It is designed to replicate the directional speaker housings that are built into the cheap OEM speakers. This way sound is better aimed at the occupants rather than directly across the car at the other door speaker. This will allow for standard 6.5"" car audio speakers to fit perfectly. This part is for the RH door, mirror it to produce the LH side" https://3dcarparts.org/library/2004/Subaru/Forester/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/9c93db17-1084-4926-a757-f44730cc41c7/images/speaker-adapter-1_1778045814502_883qwz.jpg in_stock 17.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Subaru/Forester/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-70d51bb2-0dce-409a-bc78-ef65c1d1c568 1998 Subaru Forester Front Speaker Adapter "This adapter mounts 6.5 speakers in the stock position in the front of a 98-2002 Subaru Forester. Use the stock hardware.
For printing, Make sure to use 4 walls (sides and top/bottom) so that the screws have something to bite into." https://3dcarparts.org/library/1998/Subaru/Forester/front-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/70d51bb2-0dce-409a-bc78-ef65c1d1c568/images/front-speaker-adapter-1_1778045810757_kmk9iw.jpg in_stock 17.68 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Subaru/Forester/front-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-56082e3f-e7b9-4e8b-8200-4c21c552f835 2003 Subaru Forester Dome Light Switch "Replacement light switch for 2004 Forester XS Dome light, I Understand this is the same part for the XT as well for the second generation of foresters (~ 2003-2008), may be the same for other Subarus. Do your research on Dome Light assembly 84601SA000NE.
My switch was broken by a previous owner and nowhere to be found.
Designed to be printed as shown, with full supports. Go Low and slow for resolution, and be careful removing support material.
Also be very careful installing the switch as you can break the dome light fixture internal switch." https://3dcarparts.org/library/2003/Subaru/Forester/dome-light-switch https://r2-upload.3dcarparts.workers.dev/file/parts/56082e3f-e7b9-4e8b-8200-4c21c552f835/images/dome-light-switch-1_1778045806838_ir2h6e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2003/Subaru/Forester/dome-light-switch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cc510dd2-ec30-4fe7-821e-efb9040ef938 2009 Subaru Forester Cup Holder "The geniuses over in Subaru's interior design department decided to make square cup holders for the 09-12 Forester's. While I will no longer be able to use all those square cups, mugs, and water bottles, I can now comfortably grab my Tim Horton's coffee, and really what more do you need in life.
All the heavy lifting for this design was done by brenwaterys (many thanks!!). I just copied the footprint and made it taller. The bottom of the cup sits 60mm higher than no cup holder. 130mm in total." https://3dcarparts.org/library/2009/Subaru/Forester/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/cc510dd2-ec30-4fe7-821e-efb9040ef938/images/cup-holder-1_1778045801084_8gn2d0.jpg in_stock 41.95 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Subaru/Forester/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1520d2b-e4d9-45a5-85c9-d5cef63f189e 2017 Subaru Forester Rearview Mirror Bracket "Replacement for a broken Rearview Mirror Braket for a 2017 Subaru Forester and it will probably work for a lot of other vehicles. The mirror is one of those that has no fancy features. and just has a ball joint braket attached to the glass. The ball joint on mine was frozen and someone over torqued it causing the braket to fail.
I included the Blender file I used to create the replacement so anyone can modify/improve it.
In Blender I used constructive geometery modifiers so any adjustment should be relatively easy to apply, if you know blender.
I built this using a brim for adhesion and supports just on those things hanging over the build plate (cura setting).
Used black PLA. 0.2 layer height was good enough.
I had to cut off the old bracket. Be careful that you don't dammage the ball.
Then once the bracket is printed clean it up with a strong utility knife.
I put the new braket on a strong surface and holding bracket with the ball on it push down hard to get it to pop into the ball joint.
You will need a small 3-32 screw and nut to tighten it up." https://3dcarparts.org/library/2017/Subaru/Forester/rearview-mirror-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/b1520d2b-e4d9-45a5-85c9-d5cef63f189e/images/rearview-mirror-bracket-1_1778045795358_0e35e7.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Subaru/Forester/rearview-mirror-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3f5412c8-aab7-4e9e-bc9e-6d861f4c9a25 2013 Subaru Forester Central Console Organizer Simple deep central console organizer for Subaru Forester SJ5 (2013 - 2015) https://3dcarparts.org/library/2013/Subaru/Forester/central-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/3f5412c8-aab7-4e9e-bc9e-6d861f4c9a25/images/central-console-organizer-1_1778045790698_90ryat.jpg in_stock 27.94 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Subaru/Forester/central-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e7506b32-8713-48a2-9453-93deb6541c07 2011 Subaru Forester Car Stereo Adapter Trim Bezel "Replaced the stock model CP 625U1 double DIN stereo (w/o NAV) in my 2011 Subaru Forester 2.5X Premium with the Pioneer AVH-1500NEX but the new deck was smaller so I needed an adapter to cover the open space around the deck. Didn't want to pay for the Metra 95-8902 Double DIN Installation Kit so I just made my own.
Could potentially work for other Foresters (or even other Subaru's) in the 2009-20016 era, or even remixed to fit other models/years.
Shown printed in RED for demo purposes, I printed the actual unit in black to match the stereo console.
Was planning to use the leftover bracket mounting screws from the original deck to secure it to the new deck but it fit so well that it held in place fine without any screws.
***SIDE NOTE: If you're looking for the wiring connector for this model Subaru, it requires the Metra 71-7552 Radio Wiring Harness or equivalent. You'll also need the iDatalink Maestro ACC-USB2 USB Adapter Cables to connect the built-in USB & AUX ports. And if you want to retain the steering wheel controls, you'll need a separate module for that as well." https://3dcarparts.org/library/2011/Subaru/Forester/car-stereo-adapter-trim-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/e7506b32-8713-48a2-9453-93deb6541c07/images/car-stereo-adapter-trim-bezel-1_1778045786759_2mide9.jpg in_stock 12.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Forester/car-stereo-adapter-trim-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d8e1ed7a-9cc1-4d7b-8d33-69537a468d68 2020 Subaru Forester Center Console Insert Tray "I have a 2020 Subaru Forester and need better space to hold pens, business cards and such so I created my own center console tray with pens held vertically (take up less space and stay in place ) as well as business card holder (same thought process).
Take the pen holder (left rear) and card holder (right rear) and slip into the main chassis. If you want, you can glue it but it is not necessary..." https://3dcarparts.org/library/2020/Subaru/Forester/center-console-insert-tray https://r2-upload.3dcarparts.workers.dev/file/parts/d8e1ed7a-9cc1-4d7b-8d33-69537a468d68/images/center-console-insert-tray-1_1778045779004_z9967m.jpg in_stock 15.15 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Subaru/Forester/center-console-insert-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d993774b-360e-4643-8f8f-a3d7b75fa81e 2004 Subaru Forester Side Skirt Pin This pin replaces the OEM pin that holds the side skirts to your Forester. These are prone to breaking, especially if you live in colder areas. https://3dcarparts.org/library/2004/Subaru/Forester/side-skirt-pin https://r2-upload.3dcarparts.workers.dev/file/parts/d993774b-360e-4643-8f8f-a3d7b75fa81e/images/side-skirt-pin-1_1778045772720_w3jbz6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Subaru/Forester/side-skirt-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5dc1d46f-fba3-498e-b9f8-5052cbe05352 2003 Subaru Forester Gas Cap Lever "This is a replacement for the gas cap lever on a 2003 Subaru Forester.
The hole is M.3." https://3dcarparts.org/library/2003/Subaru/Forester/gas-cap-lever https://r2-upload.3dcarparts.workers.dev/file/parts/5dc1d46f-fba3-498e-b9f8-5052cbe05352/images/gas-cap-lever-1_1778045766970_4llt9o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Subaru/Forester/gas-cap-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-caa80c4a-b068-4bff-a3a5-ed26caeeae21 2010 Subaru Forester Lift Gate Bumper "Small bumper for the liftgate of a 2010 Subaru Forester. Meant to be printed in TPU, print on the heavier side, but 100% doesn't seem to be warranted. 6 walls and 20% seems adequate. YMMV. May fit other models, I haven't checked.
Edit: V2 is 2mm wider, and 2mm taller. This allowed actual contact between the contact point of the lift gate and the bumper on my vehicle. I'll add the step files as well." https://3dcarparts.org/library/2010/Subaru/Forester/lift-gate-bumper https://r2-upload.3dcarparts.workers.dev/file/parts/caa80c4a-b068-4bff-a3a5-ed26caeeae21/images/lift-gate-bumper-1_1778045758676_vrw56l.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Subaru/Forester/lift-gate-bumper?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b84ef50e-7a95-4ae7-9a82-861b556c56c2 2002 Subaru Forester Coin Box It's a coinbox that fits in the middle console - the console with a hatch underneath the armrest. https://3dcarparts.org/library/2002/Subaru/Forester/coin-box https://r2-upload.3dcarparts.workers.dev/file/parts/b84ef50e-7a95-4ae7-9a82-861b556c56c2/images/coin-box-1_1778045746887_tpdrh6.jpg in_stock 16.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Forester/coin-box?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8133545c-0256-4f71-b4bc-610384115d16 2008 Subaru Forester Front Wiper Cover "I hate bringing my car to a mechanic, but i am not able to handle bigger jobs my self.... Somehow they allways seem to lose clips and covers and claim they weren't there in the first place.
So I decided to make backup files based on the original part while I stil got them.
This is for a subaru forester SH, but subuarus are like legos, so it probably fits multiple cars across generations
Update 14.03: Iproved design with relief cuts an bevel to improve fit against wiper arm.
Update: added v 3 with lock/alignment pin
Update 09.06: Cztek posted /thing:4415369 wich is the exact same only better, I recomend using his version instead." https://3dcarparts.org/library/2008/Subaru/Forester/front-wiper-cover https://r2-upload.3dcarparts.workers.dev/file/parts/8133545c-0256-4f71-b4bc-610384115d16/images/front-wiper-cover-1_1778045742322_73wlvl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Subaru/Forester/front-wiper-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-51d3ef6e-9b62-4820-836c-d392e4c85efe 2005 Subaru Legacy Door Trim Retainer Clip "Designed a few clips to hold the external door trim on a Subaru Legacy (2005).
These clips probably would work for other applications with similar dimensions.
13mm high (entire clip), fit a 9mm hole.
Clip 1 has an oblong base.
Clip 2 has a rectangular base." https://3dcarparts.org/library/2005/Subaru/Legacy/door-trim-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/51d3ef6e-9b62-4820-836c-d392e4c85efe/images/door-trim-retainer-clip-1_1778045733746_g0e45w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Subaru/Legacy/door-trim-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7533fadc-ed13-4a78-9fcc-c7a7872761e4 2003 Subaru Forester LED Fog Light Bracket "These are the files needed to make a bracket to add LED fog lights on a 03-05 Subaru Forester. A video tutorial can be viewed at this link.
https://youtu.be/wfj0wofthn0" https://3dcarparts.org/library/2003/Subaru/Forester/led-fog-light-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/7533fadc-ed13-4a78-9fcc-c7a7872761e4/images/led-fog-light-bracket-1_1778045724913_mzlx3k.jpg in_stock 17.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2003/Subaru/Forester/led-fog-light-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ca4e68ad-8d14-438d-92e2-c5768e67935f 1993 Subaru Impreza Visor Clip I made this visor clip for as a replacement for a broken one. It fits a 1993 subaru impreza so it should work on a 93-99 impreza. Works great but the shape is slightly different from the oem part as mine was broken. https://3dcarparts.org/library/1993/Subaru/Impreza/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ca4e68ad-8d14-438d-92e2-c5768e67935f/images/visor-clip-1_1778045714741_cqh6ap.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Subaru/Impreza/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7cd0975-b71d-4a35-a8ff-c45ab160d3d7 2007 Subaru Forester Sun Visor Extension "I have a 2007 Subaru Forester. I love the car but the sun visors are small and do not extend like most newer vehicles. I had made some cardboard sliders that worked but not pretty. These extensions slide over the visor with a flat slider that can be moved to block the sun.
Best with the slider printed flat and the large parts vertical with the mirror openings up.
Printed with PLA on Longer LK4 Pro
I used tree supports which worked very well.
Could possibly work on any visor that is about 190mm tall." https://3dcarparts.org/library/2007/Subaru/Forester/sun-visor-extension https://r2-upload.3dcarparts.workers.dev/file/parts/f7cd0975-b71d-4a35-a8ff-c45ab160d3d7/images/sun-visor-extension-1_1778045707536_vvspbv.jpg in_stock 27.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Subaru/Forester/sun-visor-extension?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-30487811-9296-4bdd-b290-19f383e07053 1997 Jeep Wrangler Gas Cap Tether Retainer Ring Original was for a after market gas cap. Remixed it to a stock gas cap (for a 98 Jeep TJ - year ranges 97-2006) that can also be taken apart to install the ring. https://3dcarparts.org/library/1997/Jeep/Wrangler/gas-cap-tether-retainer-ring https://r2-upload.3dcarparts.workers.dev/file/parts/30487811-9296-4bdd-b290-19f383e07053/images/gas-cap-tether-retainer-ring-1_1778045141949_hetejn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/gas-cap-tether-retainer-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21243000-f3be-4d5d-877e-9d32c0423c55 2015 Jeep Patriot Tail Light Assembly Clip The rear tail light assembly on the Jeep Patriot (2015 in my case) is held in place by plastic clips / rivets that are near impossible to remove without breaking when you need to change a bulb... and most automotive parts places just want you to spend a couple hundred on a whole new assembly. This clip, and a single #8 1inch wood screw replaces it perfectly. This is version 3 as I tried different shapes/spaces for tolerances. https://3dcarparts.org/library/2015/Jeep/Patriot/tail-light-assembly-clip https://r2-upload.3dcarparts.workers.dev/file/parts/21243000-f3be-4d5d-877e-9d32c0423c55/images/tail-light-assembly-clip-1_1778045137102_0rcdzn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2015/Jeep/Patriot/tail-light-assembly-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8dadc0cc-6697-489c-8df5-274b22945e44 1997 Jeep Wrangler Half Door Canvas Frame Insert "Jeep original part number 55216628. This part drops into the 1/2 door of the Jeep Wrangler TJ providing the sleeve the canvas upper frame sets into. This part isn't available anywhere but here.
Printed in PETG several years ago. Has not broke cracked, deformed, or otherwise failed." https://3dcarparts.org/library/1997/Jeep/Wrangler/half-door-canvas-frame-insert https://r2-upload.3dcarparts.workers.dev/file/parts/8dadc0cc-6697-489c-8df5-274b22945e44/images/half-door-canvas-frame-insert-1_1778045133801_f9rmt3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/half-door-canvas-frame-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c4608758-0326-4303-a09f-7cb99fdb0300 1984 Jeep Cherokee Center dash air vent Centre vents that clip into your jeep xj https://3dcarparts.org/library/1984/Jeep/Cherokee/center-dash-air-vent https://r2-upload.3dcarparts.workers.dev/file/parts/c4608758-0326-4303-a09f-7cb99fdb0300/images/center-dash-air-vent-1_1778045127517_i1mf67.jpg in_stock 15.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/center-dash-air-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c244036-4065-46c2-a27b-6a00ab23a094 2007 Jeep Wrangler Backup Camera Mount "Camera Mount for Jeep JK, Mounts onto spare tire lug nuts that came with the Smittybilt spare tire carrier.
The following camera was used: https://www.amazon.com/dp/B071R3HJ6Q?ref=ppx_pop_mob_ap_share" https://3dcarparts.org/library/2007/Jeep/Wrangler/backup-camera-mount https://r2-upload.3dcarparts.workers.dev/file/parts/2c244036-4065-46c2-a27b-6a00ab23a094/images/backup-camera-mount-1_1778045119214_42w41q.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/backup-camera-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aae446eb-6ad5-46c6-995a-6cae3a94afce 2007 Jeep Wrangler Front Door Pocket I merged two halves of an older design for post processing ease. https://3dcarparts.org/library/2007/Jeep/Wrangler/front-door-pocket https://r2-upload.3dcarparts.workers.dev/file/parts/aae446eb-6ad5-46c6-995a-6cae3a94afce/images/front-door-pocket-1_1778045108406_6xsp5y.jpg in_stock 21.84 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/front-door-pocket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6e826f4d-aed3-44ba-9b77-7d86d3252888 2007 Jeep Wrangler Overhead Switch Panel "this is a switch panel to mount over the rear view panel. this is a very preliminary design but please give feedback. it takes 8 switches:
2 of these https://rockerswitchpros.com/product/end/
6 of these https://rockerswitchpros.com/product/mdl/
you also need to figure out mounting, I used melt in nuts and drilled some holes in the plastic trim. you will also need to cut the panel since the switches will pop through." https://3dcarparts.org/library/2007/Jeep/Wrangler/overhead-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/6e826f4d-aed3-44ba-9b77-7d86d3252888/images/overhead-switch-panel-1_1778045104785_9fn7hf.jpg in_stock 25.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/overhead-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-33df1a0b-9201-41d0-928d-e18917f2dbee 2007 Jeep Wrangler Backup Camera Spare Tire Mount "This backup cam mount is designed for the Jeep JK series. Designed to be mounted behind the spare tire. The camera pokes through where the center cap would be on the wheel. Bolt pattern is 5 on 5. Designed is to be used with the Natika Backup Camera on Amazon, but might work well with other cameras.
https://a.co/d/8wkqRa1" https://3dcarparts.org/library/2007/Jeep/Wrangler/backup-camera-spare-tire-mount https://r2-upload.3dcarparts.workers.dev/file/parts/33df1a0b-9201-41d0-928d-e18917f2dbee/images/backup-camera-spare-tire-mount-1_1778045101077_go3kcq.jpg in_stock 19.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/backup-camera-spare-tire-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b5942991-08d2-470f-a7e9-7173d54468f9 2012 Jeep Wrangler 24mm Oil Filter Housing Socket "This is for all you makers that don't have a 24mm socket handy to change the oil in your Pentastar Jeep. A box end wrench or large crescent will work if you don't mind going 1/16 turn at a time against the drag of your old o-ring, but this makes it a little easier.
#### V1
1/2"" drive tested in PLA and was able to torque filter housing to spec (25 N·m /18 ft. lbs.) as well as break it free initially without breaking the socket. In destructive testing the PLA version failed at 28 ft. lbs. You may want a large crescent to ""start"" your cover depending on how long it's been since it was last removed.
#### V2
Thicker (stronger) version with combo drive for 3/8"" or 1/2"". This will be stronger at the cost of a longer print time and more material used. Destructive testing will be done shortly and results posted... RE-UPLOADED w/ fixed scaling - Thanks for the feedback :-)" https://3dcarparts.org/library/2012/Jeep/Wrangler/24mm-oil-filter-housing-socket https://r2-upload.3dcarparts.workers.dev/file/parts/b5942991-08d2-470f-a7e9-7173d54468f9/images/24mm-oil-filter-housing-socket-1_1778045095179_641q4f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2012/Jeep/Wrangler/24mm-oil-filter-housing-socket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-087c6d21-e450-431a-9bee-d8ba6063bb7b 2007 Jeep Wrangler A-Pillar RAM Mount I made this A-Pillar RAM Mount to utilize the existing bolt in the JEEP Pillar. Slide the Bolt into the MOUNT and then screw it in. No need to order long allen head screws. https://3dcarparts.org/library/2007/Jeep/Wrangler/a-pillar-ram-mount-2 https://r2-upload.3dcarparts.workers.dev/file/parts/087c6d21-e450-431a-9bee-d8ba6063bb7b/images/a-pillar-ram-mount-2-1_1778045089785_nsw2h2.jpg in_stock 13.14 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/a-pillar-ram-mount-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-46f19241-ae58-4121-ac48-2c7dc1b941ad 2007 Jeep Wrangler Toggle Switch Holder "This part is designed to hold standard round toggle switches in the coin tray in front of the 4wd lever. I recommend removing the rubber liner then using double sided sticky tape to secure it to the tray.
My goal was a removable switch block that didn't make holes in the factory plastic. I suppose if you were so inclined you could run a small screw through the bottom to secure it, you would have to drive the screw through the hole intended for the switch." https://3dcarparts.org/library/2007/Jeep/Wrangler/toggle-switch-holder https://r2-upload.3dcarparts.workers.dev/file/parts/46f19241-ae58-4121-ac48-2c7dc1b941ad/images/toggle-switch-holder-1_1778045086236_h7oop2.jpg in_stock 31.23 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/toggle-switch-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f2f445dc-9cd4-424a-add5-e421dd7a6664 2007 Jeep Wrangler Roll Bar Gear Hook "I previously made a J hook for metal detectors for the vertical part of the roll bar. They've been working great. https://www.thingiverse.com/thing:2355327
I used some bungees for hanging stuff from the horizontal top bar but it was difficult to hook and unhook items. After a series of 3 creation failures (PETG is very flexible) I ended up incorporating hook loop strips into this solution and is now working fine for getting items off the floor (more dog room). Easy to hook a strap for travel and unhook for use without needing a full reach in to manipulate both the hook and handle.
The canvas bag pictured is quite heavy. It destroyed the first version and didn't last long with a double thick version but so far so good with this thicker wider velcro strapped snug version. The little V plug helps keep the hook & loop straps securely mounted in the S-Hook body.
I used 3/4"" double sided velcro/hook & loop strapping (~20mm). The V holds in place best if the rough/loop side of the strap is in contact with the V surfaces e.g. smoother side out. Once snugged into place for awhile the V plugs hold the strap in place for repeated open/close efforts." https://3dcarparts.org/library/2007/Jeep/Wrangler/roll-bar-gear-hook https://r2-upload.3dcarparts.workers.dev/file/parts/f2f445dc-9cd4-424a-add5-e421dd7a6664/images/roll-bar-gear-hook-1_1778045080780_ardvh1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/roll-bar-gear-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-04a0e023-ac64-48f2-9398-83cff450b153 2007 Jeep Wrangler Subwoofer Bracket "This is a replacement braket for the Jeep JK Subwoofer support bracket located near the rear door. This is know to get rusty with any leak of the rear hatch seals. I modeled this up quick to replace mine. Time will tell how long it will hold up, but printing another one should be pretty easy.
I printed mine laying on it's back on an angle so all the layer lines came out on more or less a 45 degree angle and support tree was all on the backside." https://3dcarparts.org/library/2007/Jeep/Wrangler/subwoofer-bracket-2 https://r2-upload.3dcarparts.workers.dev/file/parts/04a0e023-ac64-48f2-9398-83cff450b153/images/subwoofer-bracket-2-1_1778045075680_3g9zjo.jpg in_stock 12.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/subwoofer-bracket-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5a66a036-f759-488e-a3b2-658445259b78 2012 Jeep Wrangler Center Console Pocket I was asked if I had a center pocket. Here it is. It requires removal of that net and using black silicone to mount it to the existing snap-in panel that it there. It's the best I can do. It holds 2 phones. https://3dcarparts.org/library/2012/Jeep/Wrangler/center-console-pocket https://r2-upload.3dcarparts.workers.dev/file/parts/5a66a036-f759-488e-a3b2-658445259b78/images/center-console-pocket-1_1778045061865_odii66.jpg in_stock 29.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Jeep/Wrangler/center-console-pocket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-956335ed-a374-47d7-a929-14a54b6377c4 2007 Jeep Wrangler Fog Light Mount "I have an aftermarket bumper on my Jeep and the ends of the winch were hitting the stock fog light mounting bracket/cup. This design moves the fog light forward about 13 mm and completely eliminates the box back of the original bracket. It also eliminates the need for the adjustment screw behind the fog light by extending to the front bezel of the fog light and holding it still.
The original design is in OnShape: [here](https://cad.onshape.com/documents/5f5a78cdee0ebd7e9121884c/w/1e446fd7fa3aecaed80e92eb/e/81a54c9ae51f72f3b8273563)
- No rafts
- No support
- 75% infill (for strength)
- Printed with PETG for strength/flexibility
- 4 top layers, bottom layers, and walls
- The cylinder should be a solid
- 0.2 print resolution
Ignore the zits on the print. New computer/slicer installation and I have not spent the time fine tuning the slicer yet." https://3dcarparts.org/library/2007/Jeep/Wrangler/fog-light-mount https://r2-upload.3dcarparts.workers.dev/file/parts/956335ed-a374-47d7-a929-14a54b6377c4/images/fog-light-mount-1_1778045056238_qcbzda.jpg in_stock 17.73 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/fog-light-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f69b83f1-bf50-481a-a369-ca5a2007afc7 1997 Jeep Wrangler Soft Top Bow Knuckle Small diameter soft top bow knuckle I used to convert my factory soft top to flip up style. https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-top-bow-knuckle https://r2-upload.3dcarparts.workers.dev/file/parts/f69b83f1-bf50-481a-a369-ca5a2007afc7/images/soft-top-bow-knuckle-1_1778044637419_cx74bg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-top-bow-knuckle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-821c1fa9-7638-4524-8ae9-e4ee48dfc37e 1997 Jeep Wrangler Climate Control Knob "This is a climate control knob for an early TJ (Pre-1999) model. If the heater control is a straight line, this is the correct knob (see picture). I imagine this will work with other Chrysler brand vehicles with the same setup.
I printed with .1 height, 3 walls, and 25% infill. I find .1 gives a smoother stock finish.
There are two variants. With indicator notch, or without.
Jeep Early TJ Climate Control knob.stl - Pure black without indicator
Jeep Early TJ Climate Control Knob - notched - knob with notch for indicator
Jeep Early TJ Climate Control Indicator - indicator you should print in white.
The indicator is 97% of the original size. This will allow for placement into the knotch. Scale up/down based upon the dimensional accuracy of your printer." https://3dcarparts.org/library/1997/Jeep/Wrangler/climate-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/821c1fa9-7638-4524-8ae9-e4ee48dfc37e/images/climate-control-knob-1_1778044631191_9ddf4g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/climate-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-19c0748a-a87e-4bbe-a93f-50b05662b3c9 1997 Jeep Wrangler Blower Fan Knob This is a solid replacement for the blower knob in your EARLY model TJ Jeep. May fit other Chrysler products of the 1997-98 vintage. This will NOT fit 99 or newer nor will the other knobs on on the thingiverse fit an early model. https://3dcarparts.org/library/1997/Jeep/Wrangler/blower-fan-knob https://r2-upload.3dcarparts.workers.dev/file/parts/19c0748a-a87e-4bbe-a93f-50b05662b3c9/images/blower-fan-knob-1_1778044625352_a9ki64.jpg in_stock 22.79 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/blower-fan-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c12cdabc-eb3a-4a38-b999-adea059fb3fc 2002 Jeep TJ Visor Mount Fixed the wonky distortions. Fit tested on my 2002 TJ, and it fits perfectly. https://3dcarparts.org/library/2002/Jeep/TJ/visor-mount https://r2-upload.3dcarparts.workers.dev/file/parts/c12cdabc-eb3a-4a38-b999-adea059fb3fc/images/visor-mount-1_1778044621726_4btyxd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Jeep/TJ/visor-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e19e4477-d088-422d-bbf5-3a1cafa4bb8f 1997 Jeep Wrangler Front Bumper End Cap This is a remix of 2371890, I just cleaned it up a bit, fits Jeep TJ Front bumper, print with largest area down on bed, with supports and brim https://3dcarparts.org/library/1997/Jeep/Wrangler/front-bumper-end-cap https://r2-upload.3dcarparts.workers.dev/file/parts/e19e4477-d088-422d-bbf5-3a1cafa4bb8f/images/front-bumper-end-cap-1_1778044618015_amxg0t.jpg in_stock 18.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/front-bumper-end-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e5de451d-8dba-4757-9211-a051d850b27d 1997 Jeep Wrangler Soft top anti-flutter bow clip "A bow to stop flutter when traveling down the freeway. I printed in PET with lots of sells and infill for strength.
I printed on its side with supports for max strength.
I used 1""x1/8 Aluminum 4 foot stock from my local hardware store. I trimmed it down in length until I had the tension I wanted. I also added a bit of foam to the top.
The bow just clips onto the rods above doors, and can be unclipped as needed.
Note: I printed my test pieces in clear PLA to help check for fitment and spot any cracking." https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-top-anti-flutter-bow-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e5de451d-8dba-4757-9211-a051d850b27d/images/soft-top-anti-flutter-bow-clip-1_1778044613814_cve280.jpg in_stock 16.61 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-top-anti-flutter-bow-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-32e3d372-c866-400a-9c12-b0d605ed315c 1997 Jeep Wrangler Center Console Latch Center console latch repair. Some time in the pass the latch was broken out on my 1997 Jeep TJ. I designed a replacement in Fusion 360 and screwed in place. Works great and even locks again. https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-latch-2 https://r2-upload.3dcarparts.workers.dev/file/parts/32e3d372-c866-400a-9c12-b0d605ed315c/images/center-console-latch-2-1_1778044610508_wmb3ip.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-latch-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fa478ea4-9552-4331-b8c4-18d28ec62243 1997 Jeep Wrangler Marker Light RH and LH Marker lights for Jeep Wrangler TJ. Used with 3/4 marker LEDs epoxy into place. https://3dcarparts.org/library/1997/Jeep/Wrangler/marker-light https://r2-upload.3dcarparts.workers.dev/file/parts/fa478ea4-9552-4331-b8c4-18d28ec62243/images/marker-light-1_1778044606361_0md5my.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1997/Jeep/Wrangler/marker-light?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a494e82f-caf3-4e92-86a6-8a60ece16162 1997 Jeep Wrangler Tailgate Crossbar Bushing "This is a replacement extruded busing piece for the factory crossbar above the tailgate on soft top TJ wranglers.
Printed on a Bambu p1p, polymaker PLAmax" https://3dcarparts.org/library/1997/Jeep/Wrangler/tailgate-crossbar-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/a494e82f-caf3-4e92-86a6-8a60ece16162/images/tailgate-crossbar-bushing-1_1778044602792_ymvimo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/tailgate-crossbar-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a527d453-5d48-41db-91ca-8b3ec2c47bdc 2002 Jeep Wrangler Rear Bumper End Cap "Remix of 2340538
I created a tapered endcap from this original design. It fits well in the rear bumper of my 2002 Jeep TJ. I need to lengthen and increase the thickness around the bolt holes. Printed in PLA PRO. I will update it. I included the test fit one as it prints in less time.
Print as downloaded for left side, reverse in CURA for right side. I rotate to largest flat side to print, with supports and brim" https://3dcarparts.org/library/2002/Jeep/Wrangler/rear-bumper-end-cap https://r2-upload.3dcarparts.workers.dev/file/parts/a527d453-5d48-41db-91ca-8b3ec2c47bdc/images/rear-bumper-end-cap-1_1778044598405_bedyoc.jpg in_stock 26.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Jeep/Wrangler/rear-bumper-end-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4294c047-557c-41d1-ab8a-101edb257215 1997 Jeep Wrangler Speaker Pod Adapter "5.25 inch to 6.5 inch speaker adapter for jeep tj soundbar / speaker pods.
5 1/4""
6 1/2""
redesigned to allow for chunky speakers and more mounting directions" https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-pod-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/4294c047-557c-41d1-ab8a-101edb257215/images/speaker-pod-adapter-1_1778044591470_80c1fr.jpg in_stock 22.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-pod-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f00c4823-bc43-4b53-a0fd-0a35804117dc 1997 Jeep Wrangler Sun Visor End Cap Needed a new end for my sun visor. Simple and works. It's a tight fit. https://3dcarparts.org/library/1997/Jeep/Wrangler/sun-visor-end-cap https://r2-upload.3dcarparts.workers.dev/file/parts/f00c4823-bc43-4b53-a0fd-0a35804117dc/images/sun-visor-end-cap-1_1778044587973_0i3wth.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/sun-visor-end-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-868ad0e5-92c3-4540-ab9e-5f286b8b550a 1997 Jeep Wrangler Hood Rod Holder "I made this for my 1997 Jeep Wrangler TJ.
This replaces the original clip that hold the hood rod up. It just snaps into the original hole." https://3dcarparts.org/library/1997/Jeep/Wrangler/hood-rod-holder https://r2-upload.3dcarparts.workers.dev/file/parts/868ad0e5-92c3-4540-ab9e-5f286b8b550a/images/hood-rod-holder-1_1778044584862_u9pruh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/hood-rod-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-80f463c4-114e-4e8a-96ff-00a54a9c44d5 1997 Jeep Wrangler Fan Control Knob To fix my busted fan knob in my TJ https://3dcarparts.org/library/1997/Jeep/Wrangler/fan-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/80f463c4-114e-4e8a-96ff-00a54a9c44d5/images/fan-control-knob-1_1778044581181_m4wf1o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/fan-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7f86d208-2f4a-4b67-8dcf-355f12c74bfd 1997 Jeep Wrangler Fog Light Adapter "I purchased a halo light set for my Jeep Wrangler TJ that included fog lights designed for a Wrangler JK. I wanted to use the fog lights to replace the stock fog lights mounted to the stock bumper of my TJ. This adapter accomplishes that. It provides vertical adjustment while maintaining horizontal alignment.
The main adapter body is printed in PETG for durability. it includes a tab that engages with a hole in the stock bumper to prevent rotation. The fog light has a round boss on each side which engages in pockets provided in the adapter to secure the light and provide for vertical adjustment.
The light boot is printed in TPU and is to improve the appearance of the light and to provide some extra protection. It is designed to snap over the front lens of the fog light. The use of TPU allows the boot to flex as required for alignment purposes.
To assemble the fog light into the adapter, first insert a 5/16"" x 1 hex head bolt into the hex pocket of the adapter. Use a large C-clamp or similar clamp to squeeze the top and bottom of the adapter. This will cause the sides of the adapter to widen slightly, allowing the light to be inserted into the adapter. When the clamp is removed, the adapter will spring back into shape and trap the light's bosses in the provided pockets, thus securing the light in the adapter." https://3dcarparts.org/library/1997/Jeep/Wrangler/fog-light-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/7f86d208-2f4a-4b67-8dcf-355f12c74bfd/images/fog-light-adapter-1_1778044576885_mp1yie.jpg in_stock 26.24 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1997/Jeep/Wrangler/fog-light-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c2cbcb95-f033-4518-a9e4-31dafbffa845 1997 Jeep Wrangler Hard Top Nut Holder "Desinged based off the nut holders that were in my jeep
Designed to hold a 5/16 Square nut
Printing:
I used PETG
5 walls/Tops/Bottoms and 20% infill
Printed on it's sided and used support everywhere" https://3dcarparts.org/library/1997/Jeep/Wrangler/hard-top-nut-holder https://r2-upload.3dcarparts.workers.dev/file/parts/c2cbcb95-f033-4518-a9e4-31dafbffa845/images/hard-top-nut-holder-1_1778044572635_cp2c34.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/Jeep/Wrangler/hard-top-nut-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8dd45d9c-0b0e-47d1-b357-ecb01a1a4e52 1997 Jeep Wrangler Half-Door Post Covers Exactly what the title says: Jeep TJ half-door post covers. You will need screws of your choice to hold them together. https://3dcarparts.org/library/1997/Jeep/Wrangler/half-door-post-covers https://r2-upload.3dcarparts.workers.dev/file/parts/8dd45d9c-0b0e-47d1-b357-ecb01a1a4e52/images/half-door-post-covers-1_1778044569139_mg398k.jpg in_stock 11.11 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/half-door-post-covers?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3db7be9b-7cca-48a3-ab97-32fe34713ead 1997 Jeep Wrangler Speaker Pod Spacing Ring "Spacer ring to fit my Blam 6.5"" speakers into my TJ Sound Pods. The outer edge is angled to match the contour of the pod.
When printed with PLA expand by 1%." https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-pod-spacing-ring https://r2-upload.3dcarparts.workers.dev/file/parts/3db7be9b-7cca-48a3-ab97-32fe34713ead/images/speaker-pod-spacing-ring-1_1778044565736_helkjq.jpg in_stock 28.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-pod-spacing-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6787066b-e28a-43cb-af70-c4b45d5abf9b 1998 Jeep Wrangler Climate Control Slider Knob needed a slider knob for my 98 jeep TJ air conditioner controls. Couldn't find them anywhere, so I made this one. Hope this helps https://3dcarparts.org/library/1998/Jeep/Wrangler/climate-control-slider-knob https://r2-upload.3dcarparts.workers.dev/file/parts/6787066b-e28a-43cb-af70-c4b45d5abf9b/images/climate-control-slider-knob-1_1778044561807_37buvn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Jeep/Wrangler/climate-control-slider-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f3bd5762-8627-479a-a51c-47f610b124d0 1997 Jeep Wrangler Radio Blank Plate Just a half finished project that I will probably never finish because I sold my jeep. I did print one that was usable but it could use a little more tweaking. I included the .par file so if someone wants to make it look better or change the number of rocker switch holes it will be easier. It use the same mounting holes as the stock radio and has a single spot for a rocker switch. https://3dcarparts.org/library/1997/Jeep/Wrangler/radio-blank-plate https://r2-upload.3dcarparts.workers.dev/file/parts/f3bd5762-8627-479a-a51c-47f610b124d0/images/radio-blank-plate-1_1778044556901_l16dlp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/radio-blank-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a9502f8e-10e3-432f-b06b-859a5848ee8d 2003 Jeep Wrangler Visor Mount "This is my first real attempt at designing something functional in 3D, it isn't an exact match to the OEM mount, but it fits and has work well for me.
PLA melted and drooped in the heat, PETG has held up nicely." https://3dcarparts.org/library/2003/Jeep/Wrangler/visor-mount https://r2-upload.3dcarparts.workers.dev/file/parts/a9502f8e-10e3-432f-b06b-859a5848ee8d/images/visor-mount-1_1778044553143_yn2l15.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Jeep/Wrangler/visor-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ecc2bba2-b9a3-4094-994f-8d6b998392e8 1997 Jeep Wrangler Dome Light Cover "These are two varieties of lens, diffuser or cover for the TJ dome light. I've done these up with TinkerCAD and however you see them, they aren't $30 a piece. I printed with Overture transparent PETG. Not as transparent as I would like, but good nuff. Printed at 100% infill. The dome one requires a lot of support material and finish is more rough. I use the puck variety myself.
July 4 Update! I found my dome light covers, even if only temporarily, and can see my errors. The file 'JeepDomeLens(2).stl' is the latest model. So far, it hasn't fallen down in my jeep.
July 16 Update! Found the last build was falling off, maybe from heat, maybe not. I've made some changes and pulled the dome light on my jeep so I could check the fit, so my final is JeepDomeLens(V3). I didn't redo the domed variety but that is easily dome in Tinkercad.
Aug 02, 2025 I notice there is some noise in the music, from these, due to a loose fit. I've put a bit of foam between the mating surfaces until I can do more editing. (speaker makes em vibrate)." https://3dcarparts.org/library/1997/Jeep/Wrangler/dome-light-cover https://r2-upload.3dcarparts.workers.dev/file/parts/ecc2bba2-b9a3-4094-994f-8d6b998392e8/images/dome-light-cover-1_1778044547546_cl986x.jpg in_stock 7.64 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/dome-light-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e708cde6-8fcc-48c6-b73d-0c0ae477fe4e 2021 Jeep Gladiator Dash Cam Trim Clip Mount "I made this for my 21 Jeep gladiator to mount my dash cam. It clips to the trim by the rearview mirror. I used the GoPro style connection to make it more universal for everyone to use.
I am using Bambu labs PETG-HF to see how it it holds up in the sun. It is way to hot for PLA and will deform it." https://3dcarparts.org/library/2021/Jeep/Gladiator/dash-cam-trim-clip-mount https://r2-upload.3dcarparts.workers.dev/file/parts/e708cde6-8fcc-48c6-b73d-0c0ae477fe4e/images/dash-cam-trim-clip-mount-1_1778044539943_cjriob.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2021/Jeep/Gladiator/dash-cam-trim-clip-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-136eb35d-0d59-4764-8904-a70f1dd74231 1997 Jeep Wrangler Center Console Latch "Replacement latch piece for wrangler tj center console latch mechanism. This is the actual ""latch"". The fit and function is perfect.
Mine was printed in PLA, however I may go back and replace with ASA.
I included .3mf and .stl files." https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/136eb35d-0d59-4764-8904-a70f1dd74231/images/center-console-latch-1_1778044534732_6lb0mg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-389b69ae-fd7e-4a51-9e2d-0dab62b48a75 1997 Jeep Wrangler Temperature Control Cable Fix Made this for my 97 Jeep Wrangler TJ with a broken temperature control cable. Could be customized if yours isn't broken in the same way. Design was modified a little but the dimensions are the same. Hope this helps others since used cables on ebay are over $150. https://3dcarparts.org/library/1997/Jeep/Wrangler/temperature-control-cable-fix https://r2-upload.3dcarparts.workers.dev/file/parts/389b69ae-fd7e-4a51-9e2d-0dab62b48a75/images/temperature-control-cable-fix-1_1778044529612_97u77j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/temperature-control-cable-fix?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7ba4b190-ded4-4936-87f9-74f69b1e7d50 1997 Jeep Wrangler Center Vent Replacement "I thickened the area where the movable vanes pin into the body of the vent so that they stay in. I also reworked the actual vent control lever to a simpler design that actually works.
Lastly, my Jeep didn't have the original vents and apparently there is a clip missing. The original design only has the pin on one side and seems to rely on a clip on the other end of the vent which is missing at least on my Jeep. So, I added a peg to have it snap in and work like the original vent would have. These work fine and look ok aside from matching the color of my interior.
My jeep has really hot heat and I had some sagging with PETG so I reprinted them in Polycarbonate. The original linkage isn't flexible enough to clip on the vanes without breaking if you print it with PC - so I thickened that part.
NOTE: This design fits both the left and right center vents...the direction you install the vanes in the body of the vent is important so that the handle faces down and provides a limit to how far the vent can be moved side to side." https://3dcarparts.org/library/1997/Jeep/Wrangler/center-vent-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/7ba4b190-ded4-4936-87f9-74f69b1e7d50/images/center-vent-replacement-1_1778044523625_4k76v8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-vent-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-908f895d-4ee1-412a-adba-5174661d1f6a 1997 Jeep Wrangler Door Surround Bushing Designed this to quiet door surrounds. I have a 1997 wrangler will update this as time goes on. https://3dcarparts.org/library/1997/Jeep/Wrangler/door-surround-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/908f895d-4ee1-412a-adba-5174661d1f6a/images/door-surround-bushing-1_1778044516215_6kvbaq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/door-surround-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b21efc67-222f-4be5-9038-f4007354e42a 1989 Jeep Cherokee Hood Support Rod Clip Hood support rod clip for 1989 Jeep XJ. https://3dcarparts.org/library/1989/Jeep/Cherokee/hood-support-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b21efc67-222f-4be5-9038-f4007354e42a/images/hood-support-rod-clip-1_1778044512074_ajy48d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1989/Jeep/Cherokee/hood-support-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cdb41b96-c40f-4ace-9418-bc8899f817b2 2004 Jeep Wrangler Fog Light Bracket "Did your kid hit a soccer ball into one of your factory Hella fog lights? Mine did. And I found out you can't just buy the bracket. So I made one.
Print it on a Markforged Onyx for hella strong bracket." https://3dcarparts.org/library/2004/Jeep/Wrangler/fog-light-bracket-2 https://r2-upload.3dcarparts.workers.dev/file/parts/cdb41b96-c40f-4ace-9418-bc8899f817b2/images/fog-light-bracket-2-1_1778044505175_8e3jyi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Jeep/Wrangler/fog-light-bracket-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1f0b46a2-9938-4e81-b664-9195a3a99523 2004 Jeep Wrangler Fog Light Bracket "Modified Cross Bolt Arms as follows:
1) Widened space between arms slightly to align with minimum nozzle width for nylon/CF
2) Added thread for cross bolt into receiving cross arm hole to reduce assembly stress
3) Strengthened outer structure to accommodate mods" https://3dcarparts.org/library/2004/Jeep/Wrangler/fog-light-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/1f0b46a2-9938-4e81-b664-9195a3a99523/images/fog-light-bracket-1_1778044493914_gvh8ff.jpg in_stock 15.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2004/Jeep/Wrangler/fog-light-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3c248e5b-b596-4daf-9b56-fa84180b1f02 1999 Jeep Grand Cherokee Air Box Grommet Removing the airbox from my 1999 Jeep Grand Cherokee the grommets tore. These replace them and hardmount the airbox. Can´t see how that could matter! https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/air-box-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/3c248e5b-b596-4daf-9b56-fa84180b1f02/images/air-box-grommet-1_1778043824470_1nqm95.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/air-box-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7e9560bd-6a05-49a6-83fa-7f41c014dfe1 1984 Jeep Cherokee Cup Holder "I decided to make this as I hated the aftermarket cup holder that goes over the handbrake.
This design requires 3 holes to be drilled into the center console for fitment.
When in place it sits over the transfer case selector lever so is only usable when in 2WD. Having slots for the screws to sit in, it simply lifts up and out of the way when 4WD is required.
This should fit most, if not all standard UK fast food cup sizes but was designed with McDonalds large cups as my template with wriggle room. The largest base of as cup it could take is 65mm." https://3dcarparts.org/library/1984/Jeep/Cherokee/cup-holder-3 https://r2-upload.3dcarparts.workers.dev/file/parts/7e9560bd-6a05-49a6-83fa-7f41c014dfe1/images/cup-holder-3-1_1778043821175_16knzg.jpg in_stock 25.72 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/cup-holder-3?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6be6bca2-5af3-4483-a857-75f089fe3c74 1993 Jeep Cherokee Manual Window Crank Knob "I have a 93 jeep cherokee and my manual window crank knob kept breaking, so i made a version of it and printed it out. i ran this at 25% infill and it seems to be holding up pretty well. I didn't put the hole or the x slot in because it makes it too weak and breaks right away. This one is solid and with a bit of force it goes right through and locks in place. I have to convert to mm in Simplify 3D and the overall height on Z is 27.94mm and X and Y are 26.66mm.
Update: I forgot about the scaling issue, the new STL should have the proper scale when it is imported now." https://3dcarparts.org/library/1993/Jeep/Cherokee/manual-window-crank-knob https://r2-upload.3dcarparts.workers.dev/file/parts/6be6bca2-5af3-4483-a857-75f089fe3c74/images/manual-window-crank-knob-1_1778043817686_feid7n.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Jeep/Cherokee/manual-window-crank-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0033a219-8ceb-4aa9-ba93-2d6c0cc1ca0a 2014 Jeep Cherokee Roof Rail Filler "A friend of mine just bought a 2014 Jeep Cherokee. It was missing three of the four roof rail fillers/ mounting hardware covers right from the lot. This is my solution. Probably will fit other years and models that share the same rail.
To install: Insert one end in lower than the surface of the rail, then push down on the other end and slide forward until the part snaps into place." https://3dcarparts.org/library/2014/Jeep/Cherokee/roof-rail-filler https://r2-upload.3dcarparts.workers.dev/file/parts/0033a219-8ceb-4aa9-ba93-2d6c0cc1ca0a/images/roof-rail-filler-1_1778043812011_8jlcae.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2014/Jeep/Cherokee/roof-rail-filler?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e88ea686-1034-439c-b155-b429b7209e06 2002 Jeep Cherokee 2 Gauge Pod "Mount for two gauges for the Jeep Cherokee KJ without needing to drill or break the dashboard.
To print without supports you only need to place the front of the mount on the print bed.
-------------------
Two gauge pod for Jeep Liberty KJ" https://3dcarparts.org/library/2002/Jeep/Cherokee/2-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/e88ea686-1034-439c-b155-b429b7209e06/images/2-gauge-pod-1_1778043805470_jqik8k.jpg in_stock 26.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Jeep/Cherokee/2-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-473b5101-2583-4660-b9b6-09d0d04fae65 1984 Jeep Cherokee Rear Cup Holder had to sand the two pieces to make a tight fit and screw slots are slightly miss aligned but works good. https://3dcarparts.org/library/1984/Jeep/Cherokee/rear-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/473b5101-2583-4660-b9b6-09d0d04fae65/images/rear-cup-holder-1_1778043796455_42ouls.jpg in_stock 21.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/rear-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ff4c1670-c79b-47d5-94db-21d278d20c03 1984 Jeep Cherokee XJ Map Light KC Cyclone V2 Mount Mount for kc hilight cyclone v2 aluminum heat sink and light.Hole are 5.5 for insert. But you can use a through bolt with nut on backside. https://3dcarparts.org/library/1984/Jeep/Cherokee%20XJ/map-light-kc-cyclone-v2-mount https://r2-upload.3dcarparts.workers.dev/file/parts/ff4c1670-c79b-47d5-94db-21d278d20c03/images/map-light-kc-cyclone-v2-mount-1_1778043790094_rpih75.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee%20XJ/map-light-kc-cyclone-v2-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f808022b-2adf-4815-ad4f-978b7503a641 1996 Jeep Cherokee Rear Washer Nozzle Fits 96-01 Jeep Cherokee XJ rear wiper arm https://3dcarparts.org/library/1996/Jeep/Cherokee/rear-washer-nozzle https://r2-upload.3dcarparts.workers.dev/file/parts/f808022b-2adf-4815-ad4f-978b7503a641/images/rear-washer-nozzle-1_1778043786142_hgbknd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1996/Jeep/Cherokee/rear-washer-nozzle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d03c5421-55e4-491f-bd9a-f2c734ee9757 2019 Jeep Cherokee Cup Holder Adapter This is a simple cup holder adapter that I made for my 2019 Jeep Cherokee due to my Yeti being too big to fit into the cup holder. https://3dcarparts.org/library/2019/Jeep/Cherokee/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/d03c5421-55e4-491f-bd9a-f2c734ee9757/images/cup-holder-adapter-1_1778043781248_ub8rwp.jpg in_stock 38.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Jeep/Cherokee/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9f987012-2ea6-4ec4-8222-7f4d120509a7 1987 Jeep Cherokee Center Console Latch "Remake of ""1987 Jeep Cherokee XJ Center Console Latch"" by https://www.thingiverse.com/thomasjleach.
Made the actual latch piece stick out farther to grab better and added more structural support underneath.
PLA works great" https://3dcarparts.org/library/1987/Jeep/Cherokee/center-console-latch-2 https://r2-upload.3dcarparts.workers.dev/file/parts/9f987012-2ea6-4ec4-8222-7f4d120509a7/images/center-console-latch-2-1_1778043777632_xtfoy6.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Jeep/Cherokee/center-console-latch-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0c7cca0b-b47d-456f-93c6-7863abb75974 1986 Jeep Cherokee Sun Visor Clip "Another sun visor clip for the Jeep XJ (1986). I designed the clip first and then noticed it already existed...
PLA and PET worked quite well, ABS had dissolved..." https://3dcarparts.org/library/1986/Jeep/Cherokee/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0c7cca0b-b47d-456f-93c6-7863abb75974/images/sun-visor-clip-1_1778043771221_gjkcwb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1986/Jeep/Cherokee/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21ed64c7-d9d6-4a5c-92bd-73fc5c58e3b7 2016 Jeep Renegade Visor Clip "Jeep Renegade Visor Clip (verified for 2016)
Modeled after the original. I designed and installed in my Jeep as my original broke." https://3dcarparts.org/library/2016/Jeep/Renegade/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/21ed64c7-d9d6-4a5c-92bd-73fc5c58e3b7/images/visor-clip-1_1778043766292_ud85y2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Jeep/Renegade/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ba77b6e9-d6e2-4c08-8982-8b2a3795eaa4 1999 Jeep Grand Cherokee Fuel Door Stop Rubber gas door stops missing? Print this in FLEX, pop in and go. May fit other vehicles as well. https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/fuel-door-stop https://r2-upload.3dcarparts.workers.dev/file/parts/ba77b6e9-d6e2-4c08-8982-8b2a3795eaa4/images/fuel-door-stop-1_1778043757318_7sncko.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/fuel-door-stop?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6d0585e8-5dc3-4bf1-9999-6e48ca88496f 1984 Jeep Cherokee Cargo Cover Rear Hook "Printable replacement for a 84-96 xj cherokee rear cargo area privacy cover hooks.
V1 is for the rear RH side. Should work for LH side if you mirror the part before printing.
V2 has the screw holes 12mm further inboard, and both Left and Right hand sides uploaded." https://3dcarparts.org/library/1984/Jeep/Cherokee/cargo-cover-rear-hook https://r2-upload.3dcarparts.workers.dev/file/parts/6d0585e8-5dc3-4bf1-9999-6e48ca88496f/images/cargo-cover-rear-hook-1_1778043752021_bsvvh5.jpg in_stock 14.88 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/cargo-cover-rear-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fc38925c-0d53-4253-98dc-be9b8f2dde12 1993 Jeep Grand Cherokee Window Regulator Roller "Jeep vehicles with the scissors type window regulator have three pins with ball ends that have plastic rollers over the ball. These plastic rollers run in channels that raise and lower the window. Over time they break and the window drops into the door. In years past I've used shower door rollers to repair the regulator but with a 3D printer it's easier to print replacement rollers and leave the steel pins intact.
3 are required for a full repair. If you're like me, just go ahead and print 6 or 8 because you'll ruin a few or drop a couple and lose them.
I would recommend that you print these in something stronger than PLA, I used ABS but PETG or nylon would work too. Print flat side down against the print bed.
There are a couple of ways you can install them, either put them into the channel, heat the roller with a hair dryer or heat gun on low, then press the pin into them. You can also heat them first, press them onto the pin then put the assembly into the channels.
Please watch the video to see how I did it.
https://youtu.be/tVKMV9aSTTw" https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/window-regulator-roller https://r2-upload.3dcarparts.workers.dev/file/parts/fc38925c-0d53-4253-98dc-be9b8f2dde12/images/window-regulator-roller-1_1778043745641_0z4gkq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/window-regulator-roller?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-974fc912-d4bf-43c9-85b0-fc1d57fac01c 2007 Jeep Grand Cherokee Trim Clip My wife was dodging our daughters bike and tore the trim off her 2007 Jeep Grand Cherokee. I found 1 clip unbroken so designed some replacements and printed in PETG. It's been a few months and its been perfect. I printed on its side with supports from build plate only. https://3dcarparts.org/library/2007/Jeep/Grand%20Cherokee/trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/974fc912-d4bf-43c9-85b0-fc1d57fac01c/images/trim-clip-1_1778043741930_8u3evn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Grand%20Cherokee/trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-511ffd61-c797-47b9-ba98-9949c7be7911 1997 Jeep Wrangler CB Radio Mount The Rugged Ridge CB mount platform did not work for me, in my Jeep TJ. My CB radio would hit the side window when mounted per their instructions, not a good thing, and I was not a happy camper. So I made a platform to lift it up and away from the side window, and created a little cubby hole. I'm guessing it should also work for larger radios, but I don't have one to test it out. https://3dcarparts.org/library/1997/Jeep/Wrangler/cb-radio-mount https://r2-upload.3dcarparts.workers.dev/file/parts/511ffd61-c797-47b9-ba98-9949c7be7911/images/cb-radio-mount-1_1778043738146_yf8ic8.jpg in_stock 28.24 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/cb-radio-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e43d3fcb-b438-4426-9a81-5f67728e7bee 1997 Jeep Wrangler Visor Mount Bracket "Broke the mounting bracket putting my roof back on.
You can use the original hardware (spring and retention washer), just need to bend the retention washer a bit to get it off/on the post.
For some reason the original file didn't slice correctly so I had to make a few adjustments. Let me know if you have any issues." https://3dcarparts.org/library/1997/Jeep/Wrangler/visor-mount-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e43d3fcb-b438-4426-9a81-5f67728e7bee/images/visor-mount-bracket-1_1778043734621_svi6x6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/visor-mount-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-189bd7ef-4080-44fd-b2fc-7f45126f7470 1997 Jeep Wrangler Center Vent Work in progress; should fit any TJ https://3dcarparts.org/library/1997/Jeep/Wrangler/center-vent-2 https://r2-upload.3dcarparts.workers.dev/file/parts/189bd7ef-4080-44fd-b2fc-7f45126f7470/images/center-vent-2-1_1778043724965_ac4z6d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-vent-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7fbf38b8-552e-4e55-aafc-028ad561cbf0 2006 Jeep Wrangler Air Conditioning Knob Just a simple replacement knob for the air conditioning in a Jeep TJ (2006). I added a 1.75mm hole so you can just snip off a piece of white filament for the orientation indicator on the knob and pressure fit it into the slot. https://3dcarparts.org/library/2006/Jeep/Wrangler/air-conditioning-knob https://r2-upload.3dcarparts.workers.dev/file/parts/7fbf38b8-552e-4e55-aafc-028ad561cbf0/images/air-conditioning-knob-1_1778043715589_dxtwwz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Jeep/Wrangler/air-conditioning-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4455006e-4efd-4d2b-9a34-e651d5e2538b 2006 Jeep Wrangler Center Console Organizer "Is the inside of your center console an endless pit like mine? Try out this center console with a built in business card holder! This is a perfect fir for my 2006 Wrangler.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jf8tFvqnads" https://3dcarparts.org/library/2006/Jeep/Wrangler/center-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/4455006e-4efd-4d2b-9a34-e651d5e2538b/images/center-console-organizer-1_1778043711534_9yj784.jpg in_stock 29.81 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Jeep/Wrangler/center-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9f6f2cf3-28ca-4dde-bcdd-5314c8809d9a 1998 Jeep Wrangler Rocker Switch Plug "I have some HID pod lights that I have recently installed in my 1998 Jeep Wrangler TJ. My Jeep was a factory soft top, meaning there are no switches or a wiring harness to control accessories on a hard top. To make my cheap switches look like a more ""professional"" job, I made 3 of these to replace the solid dummy ones that I would otherwise cut in the radio/dash bezel. They are a tight fit and look very similar to the factory ones when printed in black. I used 3 2-position rocker switches that have the 3 terminals on the back for female wire connectors. I do no know if they fit any other model Jeep because I made these to custom fit mine. They require no glue, fasteners, or attachment methods other than the clips on the switch and the retaining hooks on the 3d printed pieces.
Edit: 2021-1-11: Added blank .stl and .obj versions of dummy switch without hole." https://3dcarparts.org/library/1998/Jeep/Wrangler/rocker-switch-plug https://r2-upload.3dcarparts.workers.dev/file/parts/9f6f2cf3-28ca-4dde-bcdd-5314c8809d9a/images/rocker-switch-plug-1_1778043702957_j3eqd3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Jeep/Wrangler/rocker-switch-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0796b50c-89d8-4bbe-a64d-45422b340bda 1997 Jeep Wrangler Speaker Adapter Ring "Convert your factory speaker pods into 6.5"" speaker pods with 0 Modification to the pods and using the factory hardware screws plus 4 M3's. This is on my '04 Wrangler but should fit all other TJ models." https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-adapter-ring https://r2-upload.3dcarparts.workers.dev/file/parts/0796b50c-89d8-4bbe-a64d-45422b340bda/images/speaker-adapter-ring-1_1778043696625_gw68ek.jpg in_stock 25.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-adapter-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b288b0d0-79e8-4669-ba4d-a7d7d4ad9d5d 1997 Jeep Cherokee Switch Panel "I made this by measuring everything from the original panel on my brothers jeep, after a few hours (and a few test prints) I have a functional panel that can hold six OE switches and one car charger thing. Rocker switches do not seem to fit through the console plastic that goes over this piece.
If you do make this please post pictures of it installed to give me ideas on how I could improve it. Also so I can see the jeeps (:
*New*
Forgot about this since I dont use thingiverse often but since Chpj2017 remixed it I thought it would be nice to put up the end result of this project. I dont remember what I changed but the new files are called finished model and the ""oe"" and ""adapter"" files are for my solution to rocker switches, rocker switch gets placed into the adapter then its a very tight fit into the ""oe"" which gets clicked into the regular switch slot. It worked well enough that I didnt have to modify my dash but it does seem silly to have a switch stick out so far." https://3dcarparts.org/library/1997/Jeep/Cherokee/switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/b288b0d0-79e8-4669-ba4d-a7d7d4ad9d5d/images/switch-panel-1_1778043113637_t0rjxw.jpg in_stock 20.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Cherokee/switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f2194ffe-16fd-4a64-adf4-04c70369a31f 1999 Jeep Grand Cherokee Cup Holder This is alternative cup holder for Jeep Grand Cherokee WJ, works with 2004 great, thanks to moving cups to back there is place to keep few things :) https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/f2194ffe-16fd-4a64-adf4-04c70369a31f/images/cup-holder-1_1778043102778_rfc9fk.jpg in_stock 38.73 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-726b91ad-0647-4fe7-b751-3dd22d00ae4a 1984 Jeep Cherokee Tailgate Trim Clip Repair Cover "My boot cover had all but 2 clip holders snapped away from the cover itself.and could not hold itself on. These covers glue over the originals to take hold of the original plastic trim clips.
I am useless at taking pictures to demonstrate how these go but it should be self explanatory.
The cover has 9 of the standard covers and 2 of the small covers." https://3dcarparts.org/library/1984/Jeep/Cherokee/tailgate-trim-clip-repair-cover https://r2-upload.3dcarparts.workers.dev/file/parts/726b91ad-0647-4fe7-b751-3dd22d00ae4a/images/tailgate-trim-clip-repair-cover-1_1778043097720_28yhtd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/tailgate-trim-clip-repair-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12750a71-90fc-4abf-8195-a06cb69cee25 1997 Jeep Cherokee Rear Spray Nozzle Clip "The plastic spray nozzle on my 1999 Jeep XJ broke into two pieces when i was changing my wiper blades. This simple retainer wraps around the two pieces and holds them to the arm without glue. This adapter will work on all 1997-2001 XJ Cherokees but may work on other years as well.
For best results and no supports; print it on its side." https://3dcarparts.org/library/1997/Jeep/Cherokee/rear-spray-nozzle-clip https://r2-upload.3dcarparts.workers.dev/file/parts/12750a71-90fc-4abf-8195-a06cb69cee25/images/rear-spray-nozzle-clip-1_1778043092569_k98f2z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Cherokee/rear-spray-nozzle-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-55a96adf-7ef9-4414-be52-b81fad74d371 1984 Jeep Cherokee Cargo Light Lens "This is a replacement for the cargo light lens in a pre-face lift Jeep Cherokee XJ. This may work in a face lift model but I don't know if they changed design.
It does not have curved edges like the original would have.
Printed using clear ABS and 15% infill." https://3dcarparts.org/library/1984/Jeep/Cherokee/cargo-light-lens https://r2-upload.3dcarparts.workers.dev/file/parts/55a96adf-7ef9-4414-be52-b81fad74d371/images/cargo-light-lens-1_1778043088846_vthept.jpg in_stock 7.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1984/Jeep/Cherokee/cargo-light-lens?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6b3a598f-4016-4088-a170-4545582ba248 1993 Jeep Grand Cherokee Headlamp Retainer Clip "This is the horizontal adjuster retainer for the Jeep Grand Cherokee ZJ headlight. This is designed to replace Mopar Part No. 04762489 . This works flawlessly in my 1994 Jeep GC.
I have printed this with the ball socket facing towards the bed with support only for the overhang. You should not need supports for the socket.
This was designed with imperial units. If your slicer only supports metrics, be sure to scale your overall height to 19.685mm." https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/headlamp-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/6b3a598f-4016-4088-a170-4545582ba248/images/headlamp-retainer-clip-1_1778043084435_ai8a6j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/headlamp-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dae840e1-88d7-40ac-bbe5-1344d4ed17fe 1997 Jeep Cherokee Center Console Latch "For anyone that has this style XJ: the factory latch is broken more often than intact. Most people probably aren't aware that it's even supposed to latch closed! This was designed with the remaining parts of my latch and some very scientific wild guesses. The thin areas that make the flexible hinge may not last; if so, look for revision 2 after more testing...
After more testing and per Slowcarton's suggestion, I've added a raw version meant to printed on it's side: jeep-latch-side.stl. This adds a bit of strength and allows for more repeated flexing of the hinge. I used a 30 deg overhang angle and 30% infill on a raft for a nice print quality. It is a lot more wasteful of filament, though." https://3dcarparts.org/library/1997/Jeep/Cherokee/center-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/dae840e1-88d7-40ac-bbe5-1344d4ed17fe/images/center-console-latch-1_1778043077440_8rb4ns.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Cherokee/center-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-19c82d6a-d6dc-41fb-9573-892cfaa58d96 1998 Jeep Cherokee Fuse Panel Cover This is a cover for the fuse panel on Jeep Cherokee XJ. I know it fits a 1998. I have supplied the F3D and STEP files. I suggest printing in something like ABS or ASA https://3dcarparts.org/library/1998/Jeep/Cherokee/fuse-panel-cover https://r2-upload.3dcarparts.workers.dev/file/parts/19c82d6a-d6dc-41fb-9573-892cfaa58d96/images/fuse-panel-cover-1_1778043071422_ypx2ks.jpg in_stock 13.50 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1998/Jeep/Cherokee/fuse-panel-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-91fe6d34-5d71-480f-a764-dfc34385d23c 2001 Jeep Cherokee Wheel Center Cap "This is a remix of nonnux's 3D scanned design for the Jeep Grand Cherokee WJ Wheel Center Cap. https://www.thingiverse.com/thing:2453570
I lost a wheel center cap for my 2001 Jeep Cherokee Classic XJ that has the 16"" ICON wheels. nonnux's design, since it's a giant circle, can be resized to fit any wheel center cap. The internal designation code for my Jeep is XJ, so why not put that on the cap instead?
For the 16"" ICON wheels, I measured one of my original wheel center caps and it measures 50mm. I used Cura to resize the file to print the correct size. I set the file to print on the 45 degree to get the best surface finish and least post-processing on the face as well as use the least amount of supports. I used tree supports. Also because it's a good mix of having the horizontal layer lines run close to parallel with the ""stress"" this part might encounter.
I printed my initial file out of PLA for testing the fit, but will print the final versions out of PETG to have better heat resistance." https://3dcarparts.org/library/2001/Jeep/Cherokee/wheel-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/91fe6d34-5d71-480f-a764-dfc34385d23c/images/wheel-center-cap-1_1778043066154_acuxde.jpg in_stock 19.53 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Jeep/Cherokee/wheel-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a7cfca39-12c0-4eea-9553-4f468e851c29 1997 Jeep Grand Cherokee Power Window Knob Bought a '97 Jeep Grand Cherokee with a power window switch knob missing! Well, I have a 3D printer so no problem! It took a couple of iterations but finally found that this works perfectly! https://3dcarparts.org/library/1997/Jeep/Grand%20Cherokee/power-window-knob https://r2-upload.3dcarparts.workers.dev/file/parts/a7cfca39-12c0-4eea-9553-4f468e851c29/images/power-window-knob-1_1778043061703_ndr8r8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Grand%20Cherokee/power-window-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9adcd917-a2f2-489c-af35-57226c7b9ee9 1980 Jeep Cherokee Sun Visor Clip Just a simple design for an 80's model Jeep Cherokee visor clip replacement. Made a couple in PETG for my brother after designing it. https://3dcarparts.org/library/1980/Jeep/Cherokee/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9adcd917-a2f2-489c-af35-57226c7b9ee9/images/sun-visor-clip-1_1778043057456_bn78h1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1980/Jeep/Cherokee/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f6d72b66-2b87-427d-b461-0ade468d126e 1993 Jeep Grand Cherokee Hood Stop "I have a 1993 Jeep Grand Cherokee Laredo that was missing or had some broken parts under the hood.
One of these parts was what I call a hood stop. There is on on either side of the front that hold the hood at the right level when it is latched. One of these had broken off and was missing so I decided to make a new one.
This is based on measurements of the original and works. It is a little tight getting it started but then goes in fine. The threads could potentially be made slightly thinner but it worked as is. I will include a STP file if anyone wants to edit it.
I printed it top side down on an Ultimaker S5 with soluble support. It is printed in ABS as I was concerned about the low glass temp of PLA. You should be able to print with break away supports also. I did 3 shells and 20% fill.
Caution: You should make your own decisions about using this under your vehicle hood." https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/hood-stop https://r2-upload.3dcarparts.workers.dev/file/parts/f6d72b66-2b87-427d-b461-0ade468d126e/images/hood-stop-1_1778043051033_z2h0w6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/hood-stop?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8856b544-f407-4f46-aabf-ff91ed1c3c0b 1993 Jeep Grand Cherokee Power Antenna Gear "The Power antenna on my Jeep grand cherokee ZJ didn't go all the way out and made a rattling sound.
When opening the gear case I found the push roller was worn out (had a deep slot) and the tranfer wheel from the motor to the gears was broken (rattling sound).
Designing a new one and printed out, the motor works as new.
This gears probably fits other Jeeps in the same year range.
**UPDATE 2021-01**
New gear design uploaded with 3.2mm center hole ( + .2mm cleareance)
Tool for removing the cap of the antenna when unmounting from fender.
If you like what I'm doing, please consider supporting me
https://www.buymeacoffee.com/taguvove" https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/power-antenna-gear https://r2-upload.3dcarparts.workers.dev/file/parts/8856b544-f407-4f46-aabf-ff91ed1c3c0b/images/power-antenna-gear-1_1778043039305_f4wl91.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/power-antenna-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-376392d0-db43-4b88-ac09-0ab01a7a1cc5 1999 Jeep Grand Cherokee 2 DIN Radio Frame "I've worked the whole weekend on this frame. Afer sereval failed prints I came to current state of the frame.
I upload a whole frame without cutted window for a radio. You will have to cut a window yourself.
Upper part of the frame do not fit dashboard perfectly, but works for me :)
EDIT:
I've added .f3d file - ENJOY!" https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/2-din-radio-frame https://r2-upload.3dcarparts.workers.dev/file/parts/376392d0-db43-4b88-ac09-0ab01a7a1cc5/images/2-din-radio-frame-1_1778043031658_weq7ut.jpg in_stock 23.69 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/2-din-radio-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-85e98856-e986-4fda-b826-9353ddfc8ea6 2014 Jeep Cherokee Headlight Cover Clip "Replacement clip for the headlight and fog light cover for the Jeep KL (mine is a 2014, but this should work for others as well).
Tip appreciated if this helps you out :)" https://3dcarparts.org/library/2014/Jeep/Cherokee/headlight-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/85e98856-e986-4fda-b826-9353ddfc8ea6/images/headlight-cover-clip-1_1778043025201_nlarhx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2014/Jeep/Cherokee/headlight-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-049c8c4a-621a-41c8-836e-1a5e55a67a23 2011 Jeep Grand Cherokee AUX Switch Panel Sun Visor Bracket "Hey there,
I was looking for a smart and convenient place to hold my AUX switch in the car so it doesn't interrupt anything.
I'm not a big fan of screwing things directly to the dashboard and on the other hand I didn't wanted to have it loose with cable dangling all around.
It's designed to fit Aliexpress Colight 8 gang AUX panel into my 2011 Jeep Grand Cherokee WK2. Not sure but it seems to me that AUXBEAM switch panel is pretty similar to the one I have.
I believe the same sun visor was used until the end of WK2 production as well as for Dodge Durangos.
You can easily remix it to fit any other car or switch panel - I'm including STEP file.
Recommend using PETG for that application. You'll also need 6x M3x10 countersunk screws to secure the brackets to AUX panel
bracket_v1: 5mm thick, no screw holes, no embossment (I used it only to check if it fits visor, 5mm is too thick and top stiff due to that)
bracket_v2: 3mm thick (fits far better, still sturdy), with 20mm width embossment fitting switch panel and screw holes (20mm fits very tight)
bracket_v3: 3mm thick, with 19mm width embossment fitting switch panel and screw holes (fits little loose)" https://3dcarparts.org/library/2011/Jeep/Grand%20Cherokee/aux-switch-panel-sun-visor-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/049c8c4a-621a-41c8-836e-1a5e55a67a23/images/aux-switch-panel-sun-visor-bracket-1_1778043011767_gdxb4p.jpg in_stock 9.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2011/Jeep/Grand%20Cherokee/aux-switch-panel-sun-visor-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-051de5e9-1ae7-4e14-bf00-2daf07f75909 1984 Jeep Cherokee 6 switch panel Jeep Xj Cherokee 6 Switch Panel. https://3dcarparts.org/library/1984/Jeep/Cherokee/6-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/051de5e9-1ae7-4e14-bf00-2daf07f75909/images/6-switch-panel-1_1778043003770_hmi6ip.jpg in_stock 21.77 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/6-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-385deda8-0e3e-496e-b81c-159b1b10d293 1998 Jeep Cherokee Ash Tray Replacement Bin It's a bin to replace the ash tray in a Jeep Cherokee. I know it fits a 1998 center console, I'm not sure of the years that have the same console. The under side of the rim is curved to fit the contour of the center console, and it has the relief so you don't have to cut the angled section out of the center console hole. I've also provided the F3D and STEP files to make it easier to make modifications if you wish. Screw holes are for a #8 screw. I printed mine in ASA https://3dcarparts.org/library/1998/Jeep/Cherokee/ash-tray-replacement-bin https://r2-upload.3dcarparts.workers.dev/file/parts/385deda8-0e3e-496e-b81c-159b1b10d293/images/ash-tray-replacement-bin-1_1778042997976_ap1zvz.jpg in_stock 18.50 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Jeep/Cherokee/ash-tray-replacement-bin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ee29c94e-b6e3-4051-8ecd-53ebf487483a 1987 Jeep Cherokee Center Console Latch "Center latch was broken on my '87 XJ before I bought it . Designed this one off of pictures online and the pieces left.
Printing:
Needed to add a brim to keep the back corners from peeling up and a support for the clip edge.
Notes:
-The sides don't have the taper as the original did but some sanding should fix that. It works fine as is.
-This is only the main latch body. There is also a metal clip/spring and a center plastic slider that make up the entire latch." https://3dcarparts.org/library/1987/Jeep/Cherokee/center-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/ee29c94e-b6e3-4051-8ecd-53ebf487483a/images/center-console-latch-1_1778042993077_1jiieg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Jeep/Cherokee/center-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-afef7727-98ec-4ae2-848b-bcd316774c13 2021 Jeep Grand Cherokee Center Console Spacer "I designed and printed a spacer for my buddies 2021 Jeep Grand Cherokee's Center Console. This is for the standard console, not the locking console. I'm not sure if this will work on previous years of Jeep Grand Cherokee, but i know it works perfectly on the 2021 and 2022 year models.
They're pretty self explanatory, You simply print Part A and Part B, and they slide together nicely. There is a notch running through the middle of these, Top half on one and the bottom half on the other. These are 3.1mm wide, and said opening is 4mm leaving .9mm wiggle room. There is a series of wedges on Part A at the bottom, this is to help lock part B in its place and prevent it from wiggling around. Even at its current settings there is very little play in this and it stays pretty perpendicular to eachother, But if you want it even more snug, based on the orientation of my STL file, you could scale the x axis alone to 122% and it will widen this piece to about 3.75mm, leaving a total of .25mm of room in this gap. (Make sure you dont have the other axis locked to maintain proportions)
Also, I've included 2 versions of this, Version 2 and Version 3, The difference in these, is only that version 3 has the bottom corners beveled to hug the bottom of the center console more. The images i've attached to this, are version 2 as i printed the 2nd version and sanded/filed the bottom corners myself. Front to back on Part A Version 2, the bottom corner touches the beveled edge of the Center Console itself causing it to sit up 2-3mm. I spent 20 seconds sanding this corner for a tight fit, and then designed version 3 to soften these bottom corners so that no post print processing is required beyond cleaning the object itself.
Hope this helps someone." https://3dcarparts.org/library/2021/Jeep/Grand%20Cherokee/center-console-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/afef7727-98ec-4ae2-848b-bcd316774c13/images/center-console-spacer-1_1778042986984_00gq8n.jpg in_stock 19.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2021/Jeep/Grand%20Cherokee/center-console-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f0c27186-4aba-4ddc-9f46-f0741494b504 2008 Jeep Grand Cherokee Air Vent Directional Clip this is my latest version of the clip for directional control of the air vent on the dash of my 2008 Jeep Grand Cherokee. Fits and works well, not too far off, cosmetically maybe a bit rough still, but anyone is welcome to play with that part. Not sure about duplicating the chrome trim work of the original, but I don't relish the idea of paying nearly 20 bucks for an OEM replacement. https://3dcarparts.org/library/2008/Jeep/Grand%20Cherokee/air-vent-directional-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f0c27186-4aba-4ddc-9f46-f0741494b504/images/air-vent-directional-clip-1_1778042979824_snc9cg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Jeep/Grand%20Cherokee/air-vent-directional-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-748c95dd-6d51-49fe-89b4-9f21c4344846 1993 Jeep Grand Cherokee VIC/GDM Switch Panel Blank VIC/GDM panel for 1993-1999 Jeep Grand Cherokee. This replaces the Vehicle Information Center (VIC) or Graphic Display Module (GDM) so that you can add switches, USB ports, Gauges, etc. https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/vicgdm-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/748c95dd-6d51-49fe-89b4-9f21c4344846/images/vicgdm-switch-panel-1_1778042973919_gmmiv0.jpg in_stock 22.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Jeep/Grand%20Cherokee/vicgdm-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c548923a-6e35-4cff-adb6-74fb0386fb8e 1997 Jeep Cherokee Cup Holder Adapter "Wtf kind of cup was Mopar even sizing that rear cupholder to?
I've yet to find one that doesn't spill over on even the gentlest turn with gma ridin shotty.
Whatever, here's a spacer you can slap in there to fit cups that were made in this decade.
Designed to match the draft angle of the console so it taper locks in pretty well.
Print it in PETG or ABS so it doesn't turn to mush in the hot sun.
Might need to scale to 2540% depending on your slicer.
Feel free to use this file however you'd like, modify it, print/sell, it's literally just a cylinder - you've got my blessing!" https://3dcarparts.org/library/1997/Jeep/Cherokee/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/c548923a-6e35-4cff-adb6-74fb0386fb8e/images/cup-holder-adapter-1_1778042968969_5reqtg.jpg in_stock 21.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Cherokee/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0bfafd19-371b-40b9-8d51-8f651204b9e1 1984 Jeep Cherokee Rim Center Cap "This is a design from scratch centre rim cap for Jepp Cherokee XJ.
It has 6 elastic clips holding cap in the rim. Fitting is very easy - it clips well. To remove it use more force or bind 2 of 6 clips to unmount it easier.
Print it with ABS, possibly paint it.
Layer height 0,25mm
Layer width 0,4mm
No supports needed. For loosing clips just push them after print. There is a layer gap between base and clips." https://3dcarparts.org/library/1984/Jeep/Cherokee/rim-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/0bfafd19-371b-40b9-8d51-8f651204b9e1/images/rim-center-cap-1_1778042963556_xqhbvr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1984/Jeep/Cherokee/rim-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4fd20a2c-12bb-435f-a782-8dbe95deb374 1984 Jeep Cherokee Cup Holder "Most of the pre 96 Jeep Cherokees didnt have cupholders and no place to mount one, I designed this to fit over the ebrake area to give support to the larger drinks available today. This is my 1st crack at 3d design, you may want to turn off or down the support structures to shorten print times. Hope you like it.
made with Tinkercad. Edit it online https://www.tinkercad.com/things/8PLZ30WfYEe" https://3dcarparts.org/library/1984/Jeep/Cherokee/cup-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/4fd20a2c-12bb-435f-a782-8dbe95deb374/images/cup-holder-2-1_1778042959689_qksk5o.jpg in_stock 22.95 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/cup-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-55477c75-b236-4c47-8a14-86922a41ce5d 2015 Jeep Grand Cherokee H11 Bulb Wrench "Supermate91's bulb wrench did the trick. It turned a 1 hour failure into a 5 minute successful changing of the bulb. When using it, I noticed the wings flexed and I was worried they may break. They did not. But I decided to modify it anyway. In the words of Tim the Toolman, let's beef it up.
I did three iterations off the original idea.
1. same general design as original but made horizonal wall thicker
2. Version to work with a 3/8 socket wrench. Have not actually tried it but it should fit based on holding a wrench in place before I put things back together after using the original tool.
3. Like my socket version but with a handle. As Supermate91 suggest, you should consider tying a string to it and to your wrist in case you drop it inside the light enclsoure or down into the engine compartment. (I would print it out of something easy to see and not the black that I used.)
.Any layer height should work and fill of 15% and higher. I printed it out of ABS but NYLON, PLA, PETG should work fine.
WARNING: IF YOU USE THE SOCKET VERSION USE A LIGHT TOUCH. IT ONLY TURNS A 1/4 TURN. DON'T GO OVERBOARD. I put mine back end by hand without the tool." https://3dcarparts.org/library/2015/Jeep/Grand%20Cherokee/h11-bulb-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/55477c75-b236-4c47-8a14-86922a41ce5d/images/h11-bulb-wrench-1_1778042950840_zaq4s6.jpg in_stock 11.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2015/Jeep/Grand%20Cherokee/h11-bulb-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f22d78fd-40d0-4c2c-881e-81c48c8ccc5a 1999 Jeep Grand Cherokee Sun Visor Mount Clip "STL and IPT model for Grand Cherokee sun visor mount clip. Fits perfectly.
WJ 99-04 P008545150115 76878657886" https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/sun-visor-mount-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f22d78fd-40d0-4c2c-881e-81c48c8ccc5a/images/sun-visor-mount-clip-1_1778042943894_z9gtuq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/sun-visor-mount-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d1e9f4bf-4e58-4af4-8ea0-c2ead34bdf9f 1984 Jeep Cherokee Fog Light Bracket "LED Lamp - https://aliexpress.ru/item/1005003187573060.html
ATTENTION! Add thermal paste" https://3dcarparts.org/library/1984/Jeep/Cherokee/fog-light-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/d1e9f4bf-4e58-4af4-8ea0-c2ead34bdf9f/images/fog-light-bracket-1_1778042923714_al0uom.jpg in_stock 26.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1984/Jeep/Cherokee/fog-light-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-70c07650-a115-49de-823a-28a09b7d004f 2005 Jeep Grand Cherokee Lock/Unlock Rocker Button "Replacement for the OEM Lock/Unlock button on the driver's side of a WK (2005-2010) Jeep Grand Cherokee. May work for more models than WK, but I only have one to test with. Also, since it's unlabeled, may work for passenger side.
Reverse-engineered from the broken part that shot out at me violently while driving 65 MPH on the highway. This part re-uses the original spring and metal spring cap - the part responsible for the fantastic launch of the failed OEM plastic piece.
I hope someone finds this useful. The openSCAD code is included for anyone interested. I can't promise it's the best formatted code, as I'm just learning openSCAD as of 12 hours ago." https://3dcarparts.org/library/2005/Jeep/Grand%20Cherokee/lockunlock-rocker-button https://r2-upload.3dcarparts.workers.dev/file/parts/70c07650-a115-49de-823a-28a09b7d004f/images/lockunlock-rocker-button-1_1778042916327_rl9zl2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Jeep/Grand%20Cherokee/lockunlock-rocker-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-66b58f7f-29c7-4915-b1c2-f29043641d3c 1995 Jeep Grand Cherokee Sun Visor Clip This is a one piece sun visor clip for a 1995 Jeep Grand Cherokee ZJ (1st Gen). I printed front side down to minimize supports to the unexposed surfaces. https://3dcarparts.org/library/1995/Jeep/Grand%20Cherokee/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/66b58f7f-29c7-4915-b1c2-f29043641d3c/images/sun-visor-clip-1_1778042912799_z8j077.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/Jeep/Grand%20Cherokee/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5e11e98f-491d-4bc8-bfd6-8cc65c8f5f39 1994 Jeep Grand Cherokee Headlight Mounting Clips "I was frustrated trying to find good headlight mounting clips for my 1994 Jeep Grand Cherokee so I made my own.
I printed these out of carbon fiber reinforced PLA but I believe that a PC blend or tough filament will also work.
Please see the print settings for some more information.
To fully seat the circular clips, it may take a light tap on the back. It doesn't take a lot.
If you find any errors or have suggestions for improvements, please let me know.
2024-9-8: Added pictures of clips installed." https://3dcarparts.org/library/1994/Jeep/Grand%20Cherokee/headlight-mounting-clips https://r2-upload.3dcarparts.workers.dev/file/parts/5e11e98f-491d-4bc8-bfd6-8cc65c8f5f39/images/headlight-mounting-clips-1_1778042905103_yz0cz1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1994/Jeep/Grand%20Cherokee/headlight-mounting-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-099fbdde-40d6-4f9f-8e91-97df656d0336 1984 Jeep Cherokee Grille fastener screw nut insert "This is a fastener for the grille of a Jeep Cherokee XJ, unavailable from Jeep.
The part this replaces is: GRILLE FASTENER SCREW NUT INSERTS PART# J4004689
Best printed in ABS or PETG." https://3dcarparts.org/library/1984/Jeep/Cherokee/grille-fastener-screw-nut-insert https://r2-upload.3dcarparts.workers.dev/file/parts/099fbdde-40d6-4f9f-8e91-97df656d0336/images/grille-fastener-screw-nut-insert-1_1778042900403_z48qoq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1984/Jeep/Cherokee/grille-fastener-screw-nut-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ea05b94f-33f7-4a6e-beea-64ffec063302 2014 Jeep Grand Cherokee Coin Tray A simple coin tray for a 2014 Jeep Grand Cherokee (or a similar model). This coin tray features dividers to separate quarters, dimes/nickels, and pennies from each other and fits in the driver-side doorhandle and can be easily slide in and out. https://3dcarparts.org/library/2014/Jeep/Grand%20Cherokee/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/ea05b94f-33f7-4a6e-beea-64ffec063302/images/coin-tray-1_1778042894974_bcumot.jpg in_stock 15.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Jeep/Grand%20Cherokee/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2782b732-2684-4bf1-a4f1-830aaf40b59b 2007 Jeep Wrangler Rain Gutter "UPADTE: this is a WAY MORE accurate version and fits as it should vs the old model I uploaded , so give it a shot and tweak with it if you want to!
lol I did my best to copy the kind that's sold on amazon but I guess it can be a start for someone to remix an add their own details to better it if you want, I've seen old form postings asking for a 3d model they can just print their self instead of buy one online , so someone give it a remix . If it fly off at least you don't have to buy another one , you can just re print another one for free or even print extras!
you can also find me here: https://www.printables.com/model/925374-rain-gutter-for-jeep-wrangler-jk-more-accurate" https://3dcarparts.org/library/2007/Jeep/Wrangler/rain-gutter https://r2-upload.3dcarparts.workers.dev/file/parts/2782b732-2684-4bf1-a4f1-830aaf40b59b/images/rain-gutter-1_1778042231998_wp59vx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/rain-gutter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-349e6b60-4dd1-426b-86fc-94683327b881 2007 Jeep Wrangler Dash Phone Mount Extension "This is a ~180mm extension arm with a RAM style ball mount, designed to mount with the existing screw in the center dash storage tray. You will have to cut the ridge out of the center of the tray liner for the base to mount properly.
You will need:
(4) 6mm x 35mm carriage or hex head screws
(4) four 6mm wing nuts
I used a Steelie magnetic ball mount for the phone found here: https://www.amazon.com/Nite-Ize-Original-Steelie-Mount/dp/B00BAQKRHY/ref=sr_1_3?keywords=magnetic+ball+phone+mount+car&qid=1552431993&s=gateway&sr=8-3, but you can use pretty much any of this style magnetic phone mount.
** MAKE SURE YOU PRINT THIS WITH ABS or PETG!! PLA cannot withstand the temperatures that are likely to occur in the dash of a vehicle." https://3dcarparts.org/library/2007/Jeep/Wrangler/dash-phone-mount-extension https://r2-upload.3dcarparts.workers.dev/file/parts/349e6b60-4dd1-426b-86fc-94683327b881/images/dash-phone-mount-extension-1_1778042220622_6os6ie.jpg in_stock 25.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/dash-phone-mount-extension?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf77d88b-fc1a-4bee-b475-2cccf37b90fe 1997 Jeep Cherokee Aftermarket Stereo Bracket This is a Jeep Cherokee aftermarket stereo bracket. It is made to fit Jeep Cherokee XJ 1997-2001. I do not know if it fits any earlier or later models. https://3dcarparts.org/library/1997/Jeep/Cherokee/aftermarket-stereo-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/cf77d88b-fc1a-4bee-b475-2cccf37b90fe/images/aftermarket-stereo-bracket-1_1778042211723_ltgaye.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/Jeep/Cherokee/aftermarket-stereo-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-023fff5b-1fb9-408a-ae26-9b2eed5fd0b8 1984 Jeep Cherokee Cup Holder These are cup holders for a jeep Cherokee xj 1984-1996 https://3dcarparts.org/library/1984/Jeep/Cherokee/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/023fff5b-1fb9-408a-ae26-9b2eed5fd0b8/images/cup-holder-1_1778042206909_yp9qns.jpg in_stock 39.14 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Jeep/Cherokee/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1ce9b790-e710-45a4-8649-1be3816d3c0a 1999 Jeep Grand Cherokee Sun Visor Clip 3D Scanned with Artec Spider https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/1ce9b790-e710-45a4-8649-1be3816d3c0a/images/sun-visor-clip-1_1778042189886_i2rxg2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Jeep/Grand%20Cherokee/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-69cdb71a-46e7-49b8-87e7-ef5b1f740b00 2000 Jeep Cherokee Ash Tray Switch Plate I recently acquired a light bar for my 2000 Jeep Cherokee XJ and, upon running the wiring for the switch into the cab, realized that I didn't really want to drill holes in my dash. I found andyjimb's solution, but remixed it to use the switches that came with the [wiring kits I bought on Amazon](https://www.amazon.com/gp/product/B071ZPX32N/ref=ppx_yo_dt_b_asin_title_o00_s00). I also added two versions of blanks for slots not used by switches. I printed it using ABS, so it wouldn't warp in the hot summer sun of Southern Arizona. I welcome any feedback. https://3dcarparts.org/library/2000/Jeep/Cherokee/ash-tray-switch-plate https://r2-upload.3dcarparts.workers.dev/file/parts/69cdb71a-46e7-49b8-87e7-ef5b1f740b00/images/ash-tray-switch-plate-1_1778042182163_8b4yfk.jpg in_stock 8.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Jeep/Cherokee/ash-tray-switch-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5f69b01d-26f1-4c50-9b3c-4106c8c078e6 2001 Jeep Cherokee Rear Cup Holder "Cup holder for a Jeep Cherokee. Designed for our 2001 ""Freedom"". The center console arm rest slips through the framework then closes to lock the holder in position. The actual cups slide out of their bevels for storage/cleaning.
Will fit most cups, including larger ones with a tapered base (7-11 or McDonald's). I wouldn't trust it with more than 32 oz cups though, for the arm rest to close I had to keep the cross brace thin.
Created in Tinkercad." https://3dcarparts.org/library/2001/Jeep/Cherokee/rear-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5f69b01d-26f1-4c50-9b3c-4106c8c078e6/images/rear-cup-holder-1_1778042175553_irw7iu.jpg in_stock 18.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Jeep/Cherokee/rear-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5e4b5591-36e4-4a93-9336-a045d082a54c 1996 Jeep Grand Cherokee Visor Clip My Jeep ZJ visor clips are broken so i need new ones. Those are hard to find, especially here in Finland. Design is not the greatest but it works. I made it in two parts and glued together. https://3dcarparts.org/library/1996/Jeep/Grand%20Cherokee/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5e4b5591-36e4-4a93-9336-a045d082a54c/images/visor-clip-1_1778042169772_wh1zli.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Jeep/Grand%20Cherokee/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8ffb15aa-3823-4e92-b4ad-3d87807497f1 2002 Jeep Liberty Sun Visor Clip "Reinforced Sun Visor Clip for Jeep Liberty/Cherokee KJ
The original one always breaks.
PETG or ABS are best. But PLA is also ok, give it much infill" https://3dcarparts.org/library/2002/Jeep/Liberty/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8ffb15aa-3823-4e92-b4ad-3d87807497f1/images/sun-visor-clip-1_1778042165688_36m5l7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Jeep/Liberty/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eedb1e53-6e27-4352-b542-af56835dca70 2007 Jeep Wrangler Unlimited Window Insert Ventilation Screen "We go camping and sleep in the car.
So for ventilation, while we sleep, and to keep the bugs out, I looked for a solution. I couldn't find anything so I designed this.
You unfold it into the window slide and then roll up your window until it pushes in place.
You will need:
Some kind of net
3x 25mm 3mm Bolts with Nuts (For the hinge)
I used some leftover 3mm bolts to bolt on the net frames to the folding parts but you can use glue
PENDING: I am working on adding a 120mm 5V fan to the holes in the middle.
Still working on it as I go. Please feel free to leave comments for improvements." https://3dcarparts.org/library/2007/Jeep/Wrangler%20Unlimited/window-insert-ventilation-screen https://r2-upload.3dcarparts.workers.dev/file/parts/eedb1e53-6e27-4352-b542-af56835dca70/images/window-insert-ventilation-screen-1_1778041952131_wxbwp8.jpg in_stock 12.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler%20Unlimited/window-insert-ventilation-screen?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-617ccf0e-e375-4698-9a6e-58caff516ae4 2007 Jeep Wrangler A-pillar RAM mount ball "I designed this RAM Mount using a 5/16"" 90mm long allen key cap screw to mount on the A Pillar of my Jeep JK Wrangler. I will be using it to hang a RAM style arm that will hold my phone holder/charger." https://3dcarparts.org/library/2007/Jeep/Wrangler/a-pillar-ram-mount-ball https://r2-upload.3dcarparts.workers.dev/file/parts/617ccf0e-e375-4698-9a6e-58caff516ae4/images/a-pillar-ram-mount-ball-1_1778041944446_sz1mqv.jpg in_stock 13.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/a-pillar-ram-mount-ball?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2a494a07-8d99-45d6-a69f-5359052b9a9b 2009 Jeep Wrangler Drain Plug Drain Plug for 2009 Jeep Wrangler JK. https://3dcarparts.org/library/2009/Jeep/Wrangler/drain-plug https://r2-upload.3dcarparts.workers.dev/file/parts/2a494a07-8d99-45d6-a69f-5359052b9a9b/images/drain-plug-1_1778041941094_cd6mte.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Jeep/Wrangler/drain-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cd1bd22d-49c3-4265-b10e-bfae78ecd652 1997 Jeep Wrangler Under Hood LED Strip Holder Snaps inside the hood of a Jeep Wrangler TJ. Holds LED stripes for more light in the dark. https://3dcarparts.org/library/1997/Jeep/Wrangler/under-hood-led-strip-holder https://r2-upload.3dcarparts.workers.dev/file/parts/cd1bd22d-49c3-4265-b10e-bfae78ecd652/images/under-hood-led-strip-holder-1_1778041937372_a563v0.jpg in_stock 8.88 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/Jeep/Wrangler/under-hood-led-strip-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a3774a4b-cccb-4b57-8579-cdead68215b1 2002 Jeep Wrangler Vent Vanes "2002 Jeep Wrangler TJ. The vents were missing, missing parts, or cracked. Designed and printed new vents and vanes. The prototype ones in the photo are PLA which didn't survive the first cold day/hot vent application. The PLA warped substantially.
Will need in ABS or PETG for final." https://3dcarparts.org/library/2002/Jeep/Wrangler/vent-vanes https://r2-upload.3dcarparts.workers.dev/file/parts/a3774a4b-cccb-4b57-8579-cdead68215b1/images/vent-vanes-1_1778041921919_53oap6.jpg in_stock 12.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Jeep/Wrangler/vent-vanes?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e40911f0-df65-4765-ad3c-75463497613a 1987 Jeep Wrangler Mirror Bracket A bracket I made to hold the mirrors on my YJ Jeep. It bolts into the existing fixings for the windshield frame and is very rigid and simple to install https://3dcarparts.org/library/1987/Jeep/Wrangler/mirror-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e40911f0-df65-4765-ad3c-75463497613a/images/mirror-bracket-1_1778041904729_bo5sr6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1987/Jeep/Wrangler/mirror-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fd1e2f83-d461-4ea7-8cef-70ce06b54265 2008 Jeep Wrangler Sunglasses Clip "This is a sunglasses clip for a Jeep JK 2008.
There are lots of sunglasses clips on thingiverse however the jeep is difficult for a few reasons.
Instead of leather or cloth the visor is made of a hard plastic. This means plastic slips on it quite easily. In addition to that the visor is thinner on one end than the other both vertically and horizontally making it difficult for a friction fit to not want to slip off and makes placement tricky as well.
After multiple designs and prototypes I decided the best way would be for it to fit around the visor as is shown in the pictures. PETG is flexible enough that it fits around the visor tightly when fastened with a 3mm screw and nylock nut. This connects both sides of the clip and does not modify the visor itself in any way.
I printed with PETG as the temps in my area aren't enough to cause a problem with that material. If you live in Arizona or something maybe print with ABS but for most people it should be fine." https://3dcarparts.org/library/2008/Jeep/Wrangler/sunglasses-clip https://r2-upload.3dcarparts.workers.dev/file/parts/fd1e2f83-d461-4ea7-8cef-70ce06b54265/images/sunglasses-clip-1_1778041898914_vh3nmc.jpg in_stock 8.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Jeep/Wrangler/sunglasses-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d1dd91cb-9016-4fb3-a66a-f826eb1e2978 2007 Jeep Wrangler Carpet Retaining Clip This is the carpet retaining clip for a Jeep JK. My jeep uses 6 of these. 2 under the dash above your feet and one under each seat. https://3dcarparts.org/library/2007/Jeep/Wrangler/carpet-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d1dd91cb-9016-4fb3-a66a-f826eb1e2978/images/carpet-retaining-clip-1_1778041895462_qlumjx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/carpet-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eb1087df-f8d7-4f01-898b-bdd4447c94a7 1976 Mercedes-Benz W123 Foot Cover Interior Screw "Redesigned the Plastic Screw for the feet cover interior of W123 Mercedes Benz
In case you need it, please post your Mercedes in the comments or Makes of this Screw ;-)
Have Fun and regards!
100% Infill and Increased the amount of wall layers to make it stronger.
Print the layers in line of the screw for maximum stability." https://3dcarparts.org/library/1976/Mercedes-Benz/W123/foot-cover-interior-screw https://r2-upload.3dcarparts.workers.dev/file/parts/eb1087df-f8d7-4f01-898b-bdd4447c94a7/images/foot-cover-interior-screw-1_1778041683210_rdt4ry.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes-Benz/W123/foot-cover-interior-screw?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-59c1c1b4-910e-4943-8c9b-69c7d067a6d7 1976 Mercedes W123 Cup Holder Another cupholder for Mercedes W123 vehicles center console area. I wanted to design one different than the other ones that I've seen on here - use less filament, and make it fit better. https://3dcarparts.org/library/1976/Mercedes/W123/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/59c1c1b4-910e-4943-8c9b-69c7d067a6d7/images/cup-holder-1_1778041678646_821sb4.jpg in_stock 36.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes/W123/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1cfc9438-96b1-4adb-8949-d22e866f0c88 1976 Mercedes-Benz W123 Washer Fluid Tank Cap "Replacement cap for Mercedes W123 washer fluid tank
Printed in tpu 0,2mm layer hight without supports" https://3dcarparts.org/library/1976/Mercedes-Benz/W123/washer-fluid-tank-cap https://r2-upload.3dcarparts.workers.dev/file/parts/1cfc9438-96b1-4adb-8949-d22e866f0c88/images/washer-fluid-tank-cap-1_1778041674556_epuezp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1976/Mercedes-Benz/W123/washer-fluid-tank-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-780d4b8e-5eb4-44fe-b0f3-b944b7e26977 1982 Mercedes-Benz 190E Vent Surround "Vent surround for the drivers side. Usually cracks as its made from thin plastic. There is a two part design you can glue together for easier printing as welll as a single complete design.
Its not the most accurate model as i never managed to finish this project but it fitted fine in my car.
If your country has warm summers print in ABS, PLA just warped into mush for me :'(
For LHD just mirror the part before prinitng" https://3dcarparts.org/library/1982/Mercedes-Benz/190E/vent-surround https://r2-upload.3dcarparts.workers.dev/file/parts/780d4b8e-5eb4-44fe-b0f3-b944b7e26977/images/vent-surround-1_1778041619706_47o8wb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/Mercedes-Benz/190E/vent-surround?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2325ccd7-14ad-48ab-b292-1715bce1a2f2 2014 Mercedes-Benz C-Class Cup Holder Insert (Dopper Bottle) This is a Dopper drink bottle holder for the Mercedes Benz W205 center console cupholder. The standard cupholder is way too wide for a dopper and they fall down all the time. This model fits the standard cupholder and stabilizes 2 doppers! https://3dcarparts.org/library/2014/Mercedes-Benz/C-Class/cup-holder-insert-dopper-bottle https://r2-upload.3dcarparts.workers.dev/file/parts/2325ccd7-14ad-48ab-b292-1715bce1a2f2/images/cup-holder-insert-dopper-bottle-1_1778041613120_1euzoq.jpg in_stock 30.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Mercedes-Benz/C-Class/cup-holder-insert-dopper-bottle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-49c8c667-92f6-4c88-8446-8fb098aa0238 1993 Mercedes C-Class Dash Tray USB Charger Pod "This USB charger pod fits on the tray beneath the radio of a Mercedes W202 C-Class.
The hole is 29mm diameter to fit a panel-mounted round USB charger.
Printed with black PETG, it may need some light sanding on the rear and front rounded corners for a perfect fit. I fixed it in place with two 2mmx12mm screws." https://3dcarparts.org/library/1993/Mercedes/C-Class/dash-tray-usb-charger-pod https://r2-upload.3dcarparts.workers.dev/file/parts/49c8c667-92f6-4c88-8446-8fb098aa0238/images/dash-tray-usb-charger-pod-1_1778041609876_jlq63i.jpg in_stock 12.39 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Mercedes/C-Class/dash-tray-usb-charger-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-322379c7-8e83-41f4-8a37-57aafcc34b30 1982 Mercedes-Benz W201 Speaker Adapter "This adapter allows the Alpine SXE-1025S speakers into the original mountings of the Mercedes W201 dashboard.
The original covers still fit over the speakers just fine." https://3dcarparts.org/library/1982/Mercedes-Benz/W201/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/322379c7-8e83-41f4-8a37-57aafcc34b30/images/speaker-adapter-1_1778041606486_el3kfp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1982/Mercedes-Benz/W201/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf18c96c-1212-4df2-9569-d580418c0af7 2002 Mercedes CLK Number Plate Light Lens "A replacement lens for the number plate lights on the back of the Mercedes CLK W209.
Includes a version with the legs to hold the lamp bulb itself and a version without the legs.
You must of course use a clear filament and PETG may be better than PLA due to it's slight increase in resistance to heat and weather.
I would also advise putting a little bit of silicone sealant around the rim of the lens to prevent water ingress.
I have included bottom sections with a thickness of 0.2mm to 0.8mm, depending on how much light you want to pass through vs how strong the part will be.
I advise 0.2mm or 0.4mm to make sure the light can get through correctly.
Of course you can use the pause at height function in CURA to make these two tone as I have." https://3dcarparts.org/library/2002/Mercedes/CLK/number-plate-light-lens https://r2-upload.3dcarparts.workers.dev/file/parts/cf18c96c-1212-4df2-9569-d580418c0af7/images/number-plate-light-lens-1_1778041486082_t618p8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2002/Mercedes/CLK/number-plate-light-lens?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-355ce1e4-d4a7-4b77-97ec-8841f36fb978 2014 Mercedes-Benz C-Class Windshield Washer Fluid Funnel "Wiper fluid funnel for Mercedes C-Class W205 (and certainly others too?)
Designed for TPU or other rubbery filament. Just as easy as pressing the lid on and having both hands free to pour. Very practical if you stand next to the car with the 5 liter canister ;-)" https://3dcarparts.org/library/2014/Mercedes-Benz/C-Class/windshield-washer-fluid-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/355ce1e4-d4a7-4b77-97ec-8841f36fb978/images/windshield-washer-fluid-funnel-1_1778041469079_neba4x.jpg in_stock 18.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2014/Mercedes-Benz/C-Class/windshield-washer-fluid-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d4b92ad1-dd16-4f3e-9e19-d1f828bb1a2c 2007 Mercedes C-Class Undertray Wheel Arch Trim Nut "A trim clip that goes under the car behind the wheel arch to hold the wheel liner up on my W204. Probably used on other cars though.
I broke it, and ran this up very quickly. You can see what a bad job I did in the photo, it's very bad quality and I forgot to put it under the tabs in the liner when I fitted it. I'm a bad person. But it seems to be strong and secure, so I didn't take another run at it.
Use plenty of infill, maybe like 50-60%. I didn't, and did it up with an impact driver, and it was fine. But you should." https://3dcarparts.org/library/2007/Mercedes/C-Class/undertray-wheel-arch-trim-nut https://r2-upload.3dcarparts.workers.dev/file/parts/d4b92ad1-dd16-4f3e-9e19-d1f828bb1a2c/images/undertray-wheel-arch-trim-nut-1_1778041464883_alc134.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Mercedes/C-Class/undertray-wheel-arch-trim-nut?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4e94086a-07e5-41d0-81d8-baad86804ea2 2022 Mercedes-Benz C-Class Coat Hook For a MB C300 - Year 2022 - Multi-contour seats - W206 - a coat hook was needed to hang a bag or jacket. This is what was created. Unfortunately, during printing the upper part of the hook was not printed, but this does not affect the function. https://3dcarparts.org/library/2022/Mercedes-Benz/C-Class/coat-hook https://r2-upload.3dcarparts.workers.dev/file/parts/4e94086a-07e5-41d0-81d8-baad86804ea2/images/coat-hook-1_1778041460572_2wj8bk.jpg in_stock 12.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Mercedes-Benz/C-Class/coat-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-16dfaca1-0405-4e9f-bd19-876e44aeaee6 2007 Mercedes-Benz C-Class Ventilation Flap Connecting Rod its a connecting rod betwen vetinlation flaps. use PET-G for it. if not enought rigiditiy can be scaled on Z to even 300% original size and still fits. you can enlarge holes with something hot if needed but shuld be correct diameter. original ones where made from metal, but petg works well enought as well https://3dcarparts.org/library/2007/Mercedes-Benz/C-Class/ventilation-flap-connecting-rod https://r2-upload.3dcarparts.workers.dev/file/parts/16dfaca1-0405-4e9f-bd19-876e44aeaee6/images/ventilation-flap-connecting-rod-1_1778041456675_qf2pur.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mercedes-Benz/C-Class/ventilation-flap-connecting-rod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3f77cfa4-de31-4dfa-84e9-ac7d61fde19a 2003 Mercedes Vito / Viano Bonnet Hood Strut Clip "The clip used to hold the bonnet/hood strut in its storage position on the W639 Mercedes vehicles.
The design has been changed slightly (Tab thickened) to improve robustness of the printed part.
I printed in PETG for strength and the part was printed 'on end' with a small amount of support for the through hole." https://3dcarparts.org/library/2003/Mercedes/Vito%20%2F%20Viano/bonnet-hood-strut-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3f77cfa4-de31-4dfa-84e9-ac7d61fde19a/images/bonnet-hood-strut-clip-1_1778040925879_v8qbk0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2003/Mercedes/Vito%20%2F%20Viano/bonnet-hood-strut-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f5965c70-548e-4182-a468-db7b64f2656c 1976 Mercedes W123 License Plate Light Frame "frame for broken license plate light for any type of Mercedes W123.
Also useful as cutting aid for a new sealing." https://3dcarparts.org/library/1976/Mercedes/W123/license-plate-light-frame https://r2-upload.3dcarparts.workers.dev/file/parts/f5965c70-548e-4182-a468-db7b64f2656c/images/license-plate-light-frame-1_1778040921011_7llm0u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1976/Mercedes/W123/license-plate-light-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3fbeb162-f1fe-4f7c-8859-b1248cc1ac72 2006 Mercedes-Benz M-Class Multimedia Cover (Ashtray Replacement) "Multimedia cover for Mercedes-Benz, replaces the ashtray box and lighter.
Install an mp3 player with bluetooth, SD reader and mobile charger.
Valid for all W164 ML280, ML320, MLxxx, from 2006 to 2009.
Also, you need a thing like this:
https://es.aliexpress.com/item/ALLOMN-USB-de-coche-manos-libres-Bluetooth-MP3-jugador-integrado-MP3-decodificador-Junta-m-dulo-con/32848664334.html?spm=a2g0s.9042311.0.0.135d63c0WDxVWw" https://3dcarparts.org/library/2006/Mercedes-Benz/M-Class/multimedia-cover-ashtray-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/3fbeb162-f1fe-4f7c-8859-b1248cc1ac72/images/multimedia-cover-ashtray-replacement-1_1778040917517_nnrnau.jpg in_stock 16.77 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Mercedes-Benz/M-Class/multimedia-cover-ashtray-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-718e7802-846a-4369-8940-2191d5ab036b 1979 Mercedes-Benz S-Class Towing Eye Cover Trim Clip Trim clips for towing eye cover Mercedes-Benz W126 https://3dcarparts.org/library/1979/Mercedes-Benz/S-Class/towing-eye-cover-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/718e7802-846a-4369-8940-2191d5ab036b/images/towing-eye-cover-trim-clip-1_1778040913967_2p7lfl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1979/Mercedes-Benz/S-Class/towing-eye-cover-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-36199965-fa56-4fc5-b3c1-8b091d8fed9d 1989 Mercedes-Benz SL-Class Dome Light Lens Clip I tried printing the entire lens with clear PETG and it worked, but I decided to just print the clips and superglue them on the the original lens because it let more light through. https://3dcarparts.org/library/1989/Mercedes-Benz/SL-Class/dome-light-lens-clip https://r2-upload.3dcarparts.workers.dev/file/parts/36199965-fa56-4fc5-b3c1-8b091d8fed9d/images/dome-light-lens-clip-1_1778040904448_vtjdqy.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mercedes-Benz/SL-Class/dome-light-lens-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-75f74443-e97a-4d7b-82f3-388f574151ed 1976 Mercedes-Benz W123 Squirrel Cage Blower Fan Wheel "Replacement part if the fan blades has been damaged.
to Mercedes Bentz W123
Designed in Autodesk fusion 360, adding archive file for modifications." https://3dcarparts.org/library/1976/Mercedes-Benz/W123/squirrel-cage-blower-fan-wheel https://r2-upload.3dcarparts.workers.dev/file/parts/75f74443-e97a-4d7b-82f3-388f574151ed/images/squirrel-cage-blower-fan-wheel-1_1778040888600_1h6cgo.jpg in_stock 26.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories cooling-system https://3dcarparts.org/library/1976/Mercedes-Benz/W123/squirrel-cage-blower-fan-wheel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2569cc6b-1edd-4255-b231-e24921007d40 1976 Mercedes-Benz W123 Door Lock Insert "I designed this plastic insert to fix the problem with door locking on w123
(door is not locked after slam).
New insert guides door lock lever to rotate in lock position, to last it long highly reccomend to print it from high quality ABS (ABS-X) or another durable plastics.
I printed it with 0.6mm nozzle and 0.25 layer height and in 100% scale.
IMPORTANT, this insert should be printed lying on the side (lying plastics along the part will make it much stronger in our case.)" https://3dcarparts.org/library/1976/Mercedes-Benz/W123/door-lock-insert https://r2-upload.3dcarparts.workers.dev/file/parts/2569cc6b-1edd-4255-b231-e24921007d40/images/door-lock-insert-1_1778040884387_kc2kh6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes-Benz/W123/door-lock-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a973e748-5233-4330-a2f9-8f828dfbc75f 1976 Mercedes-Benz W123 Rear Speaker Grill Cover "Modified slightly for easier printing and compatibility with my Rockford-Fosgate R1525 5.25"" speakers. Original design credits to alex199170.
Print in ABS or other high temperature material to avoid melting issues." https://3dcarparts.org/library/1976/Mercedes-Benz/W123/rear-speaker-grill-cover https://r2-upload.3dcarparts.workers.dev/file/parts/a973e748-5233-4330-a2f9-8f828dfbc75f/images/rear-speaker-grill-cover-1_1778040880209_wx5bft.jpg in_stock 22.80 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes-Benz/W123/rear-speaker-grill-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-41f019d0-4c8a-40f9-abb4-4ff7e24362a6 1976 Mercedes W123 Glove Compartment Cup Holder Bracket "This is a glove compartment cup holder bracket and is a remix of https://www.thingiverse.com/thing:644213. The bracket is redesigned from the original to specifically fit the glove compartment for a Mercedes W123 chassis (240d, 300d, etc.) Changes to the original design include:
* securing the holder from slipping on the ledge of the glove compartment
* changing the angle such that the cup is level when the car is level
* changing the lip such that it fits securely against the glove compartment door
* narrowing the gap on the bracket where the ring attaches to hold the cup. This secures the ring better to the bracket
This bracket is intended to be used with the ring provided with the original cup holder design (https://www.thingiverse.com/thing:644213)" https://3dcarparts.org/library/1976/Mercedes/W123/glove-compartment-cup-holder-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/41f019d0-4c8a-40f9-abb4-4ff7e24362a6/images/glove-compartment-cup-holder-bracket-1_1778040876666_m95c6e.jpg in_stock 14.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes/W123/glove-compartment-cup-holder-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7ab3b9e1-467e-4474-a69d-c6fe405dc0df 1976 Mercedes W123 Rear Speaker Grills "Hello,
If you want to equip your Mercedes W123 with rear speakers, this can be difficult in some ways. Mostly due to the original speakers and the speaker grills actually hard to find today.
So I designed speaker grills, that look almost the same as the original ones, but fit on readily available Visaton speakers. In particular the FX, PX and FR 13 speakers.
I have designed two different versions. The normal one for the FR speaker and the one with the FX_PX suffix, which is 3mm higher and has a cutout in the middle, to accommodate the tweeter. I only have the FR 13 speakers at home, so I could not test if the FX_PX grill fit on the FX or PX speakers." https://3dcarparts.org/library/1976/Mercedes/W123/rear-speaker-grills https://r2-upload.3dcarparts.workers.dev/file/parts/7ab3b9e1-467e-4474-a69d-c6fe405dc0df/images/rear-speaker-grills-1_1778040865085_ukyazc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes/W123/rear-speaker-grills?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-885f6424-433c-441f-92a3-a9216bfaea9f 1982 Mercedes-Benz 300D Climate Control Wood Panel Climate control wood panel for Mercedes-Benz w123. It fits my 1982 300D sedan, although the climate control panel varies between models, so it may not fit others. Just make sure to take a good look at your car and the model before printing. The two pins should slide into the two holes behind the panel. I would recommend securing it with some type of epoxy, but the panel should stay put even without it. You are of course going to want your own wood veneer on it, similar to what I have done. https://3dcarparts.org/library/1982/Mercedes-Benz/300D/climate-control-wood-panel https://r2-upload.3dcarparts.workers.dev/file/parts/885f6424-433c-441f-92a3-a9216bfaea9f/images/climate-control-wood-panel-1_1778040855218_asoupf.jpg in_stock 17.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/Mercedes-Benz/300D/climate-control-wood-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2675671-0430-462d-be08-f5e3f4e076b1 1976 Mercedes W123 dashboard switch blank cover Switch cover blank for W123 Mercedes. It is a STEP file so is easily editable to your needs. There is another cover on here already but was having trouble editing it so figured I would post this one. Add holes or other features for whatever generic switch or cover you want. Iadded a usb plug from a Toyota Vigo. I have included those files as well if you by chance want to install the same plug. I printed in ABS with supports and 50%infil with good results. Fits really snug and the texture from the build plate is almost like the original texture. https://3dcarparts.org/library/1976/Mercedes/W123/dashboard-switch-blank-cover https://r2-upload.3dcarparts.workers.dev/file/parts/b2675671-0430-462d-be08-f5e3f4e076b1/images/dashboard-switch-blank-cover-1_1778040849637_5walkh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes/W123/dashboard-switch-blank-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-231d3b14-8354-433a-b535-9a051a146969 1979 Mercedes-Benz S-Class Cup Holder W126 can holder 20% infill https://3dcarparts.org/library/1979/Mercedes-Benz/S-Class/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/231d3b14-8354-433a-b535-9a051a146969/images/cup-holder-1_1778040841038_g67ji8.jpg in_stock 29.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Mercedes-Benz/S-Class/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e9b5ecd3-967f-476c-8eb6-c71784d65e08 1976 Mercedes-Benz W123 Door Wiring Protection Sleeve "Hello,
In the file you will find a protective sleeve for the Mercedes W123, which protects the wiring routed into the door.
I printed it with flexible filament from Sain Smart.
The print result is, as always, a matter of settings.
Make sure that the end with the sealing lip is facing upward in the slicer." https://3dcarparts.org/library/1976/Mercedes-Benz/W123/door-wiring-protection-sleeve https://r2-upload.3dcarparts.workers.dev/file/parts/e9b5ecd3-967f-476c-8eb6-c71784d65e08/images/door-wiring-protection-sleeve-1_1778040833279_joygnf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1976/Mercedes-Benz/W123/door-wiring-protection-sleeve?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f6705eb9-f82b-4103-9e75-8cf5b57fc9d4 1970 Mercedes Multi-Model Power Antenna Drain Fitting " This is the drain fitting for Hirschmann power antennas used in European cars from the 1970s-80s (Mercedes, BMW, etc). It is used to funnel water that may seep past the radio antenna out of the car down a drain tube. The outer diameter of the tube fitting is 4mm which is made to work with the original drain tube. If the original drain tube is missing, use any tube with an inner diameter of 4mm. Follow pictures for installation. The part fits snugly at the bottom of the power antenna housing. Apply a layer of silicone around the lip for a watertight seal. DO NOT PRINT WITH PLA! Water may, over time, cause the PLA plastic to deteriorate. ABS or PETG is recommended for this part. Print with the tube fitting parallel with the build plate, as shown in the photos. Do NOT use supports inside the tube fitting. Tree supports are recommended (touching build plate only). This part will fit the following cars: The design is inspired by user:
Michael Smyer. He designed the cap for S14:
240SX (S14) Windshield Washer Reservoir Cap V2
A support for a led made in **Black PLA**. I was bored of the lack of light in my ford fiesta trunk so I made an extra light that I reused from other project.
**You don't need any glue**
###### [PandaoEditor](https://pandao.github.io/editor.md/en.html ""PandaoEditor"")
Details
Installation
Printing Instructions
Application
" https://3dcarparts.org/library/1970/Mercedes/Multi-Model/power-antenna-drain-fitting https://r2-upload.3dcarparts.workers.dev/file/parts/f6705eb9-f82b-4103-9e75-8cf5b57fc9d4/images/power-antenna-drain-fitting-1_1778040827612_q4cwi1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1970/Mercedes/Multi-Model/power-antenna-drain-fitting?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eaaf2dcb-9c03-4b5e-8992-0f4cfeb2d5e5 1976 Mercedes-Benz W123 Glove Box Wood Trim Base Layer The base layer for the wood trim on the infamous w123 glove box. If you manage to get the latch off, you should be able to put these two pieces together to get the base layer for the wood trim. Just put some wood veneer on, then finish it and it should be good to put back together. https://3dcarparts.org/library/1976/Mercedes-Benz/W123/glove-box-wood-trim-base-layer https://r2-upload.3dcarparts.workers.dev/file/parts/eaaf2dcb-9c03-4b5e-8992-0f4cfeb2d5e5/images/glove-box-wood-trim-base-layer-1_1778040822848_778als.jpg in_stock 14.53 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1976/Mercedes-Benz/W123/glove-box-wood-trim-base-layer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6e73c745-c0c6-48b1-b46b-0c1d61cdc062 2005 Mercedes-Benz ML-Class Rear Bumper Bar Mount Bracket "hi,
Mercedes Benz ML W164 Rear Bumper Bar Mount Bracket A1648802914
year 2005-2011
For all ml
ml350
ml400
ml450
ml500" https://3dcarparts.org/library/2005/Mercedes-Benz/ML-Class/rear-bumper-bar-mount-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/6e73c745-c0c6-48b1-b46b-0c1d61cdc062/images/rear-bumper-bar-mount-bracket-1_1778040819274_7g6k6y.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2005/Mercedes-Benz/ML-Class/rear-bumper-bar-mount-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-64d19cf7-6458-47f6-be5e-1dad636cc3cd 2007 Mercedes C-Class Door Pocket Storage Box "MORE ORGANIZATION IN THE CAR - LESS STRESS - DOOR STORAGE
The RIMA-BOX is used to store things that you would otherwise have to look for in the car, e.g. fuel cards - charging cards for electric or hybrid vehicles - Sanifair vouchers - handkerchiefs - pens etc.
This shelf reduces stress for the driver. It is no longer necessary to search for fuel cards and other utensils. Car wash tickets bought as a precaution can be kept there. And if there is no line in front of the car wash, you can wash without waiting.
The RIMA-BOX always contains a compartment for a small razor (or handkerchiefs instead), a compartment for a flashlight, a compartment for fuel cards/Sanifair coupons and optionally, depending on the vehicle type, smaller compartments for pens, Q-Tips, etc. The RIMA-BOX is available on Thingiverse for:
Mercedes C-Class W204 Bj. 2007-2015" https://3dcarparts.org/library/2007/Mercedes/C-Class/door-pocket-storage-box https://r2-upload.3dcarparts.workers.dev/file/parts/64d19cf7-6458-47f6-be5e-1dad636cc3cd/images/door-pocket-storage-box-1_1778040795994_5t240m.jpg in_stock 34.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mercedes/C-Class/door-pocket-storage-box?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-185f6559-2d0c-406b-8b2a-885c09082f79 2007 Mercedes C-Class Key Insert "Edited the model because it had errors
Original Design by Floki92" https://3dcarparts.org/library/2007/Mercedes/C-Class/key-insert https://r2-upload.3dcarparts.workers.dev/file/parts/185f6559-2d0c-406b-8b2a-885c09082f79/images/key-insert-1_1778040792276_3covkj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mercedes/C-Class/key-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9b398a67-4724-4f94-9875-80ecaadc29d1 2007 Mercedes-Benz C-Class Rear Cup Holder back cupholder for center console for mercedes w204 https://3dcarparts.org/library/2007/Mercedes-Benz/C-Class/rear-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/9b398a67-4724-4f94-9875-80ecaadc29d1/images/rear-cup-holder-1_1778040728721_q5agb0.jpg in_stock 27.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mercedes-Benz/C-Class/rear-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f9344d97-4b22-4858-abba-6cca4161c541 1984 Mercedes-Benz W124 Center Console Fader Switch USB Cable Insert Center console fader switch bypass insert. When you disassemble your fader you can plug in this piece to fit a USB extension cord from your updated headunit. https://3dcarparts.org/library/1984/Mercedes-Benz/W124/center-console-fader-switch-usb-cable-insert https://r2-upload.3dcarparts.workers.dev/file/parts/f9344d97-4b22-4858-abba-6cca4161c541/images/center-console-fader-switch-usb-cable-insert-1_1778040094965_x9b9nf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Mercedes-Benz/W124/center-console-fader-switch-usb-cable-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0c4a9992-7c45-4a9c-b411-a731029a8fce 1997 Mercedes-Benz A-Class Door Seal Clip "I've designed this part since my broke and i couldn't find a replacement part
This part works nearly as good as the OEM part." https://3dcarparts.org/library/1997/Mercedes-Benz/A-Class/door-seal-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0c4a9992-7c45-4a9c-b411-a731029a8fce/images/door-seal-clip-1_1778040091230_b500ni.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Mercedes-Benz/A-Class/door-seal-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b9be58f0-ae80-4368-8b24-04537e8ffffb 1984 Mercedes-Benz W124 Speaker Cover It's not original but it works. It doesn't have lower legs, but that's no problem. I did and I use it. https://3dcarparts.org/library/1984/Mercedes-Benz/W124/speaker-cover https://r2-upload.3dcarparts.workers.dev/file/parts/b9be58f0-ae80-4368-8b24-04537e8ffffb/images/speaker-cover-1_1778039994356_5q5n1q.jpg in_stock 26.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Mercedes-Benz/W124/speaker-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-01a28dd6-a493-49fd-a034-6d2f7bb67c4b 2011 Mercedes A-Class Floor Mat Clip "Clips for the floor mat in the drivers side of the car.
For a Mercedes A-Class (W169) 2011 (Perhaps other models)
This 2-part clip, clips together from each side of the floormat. It can the be clipped to the floor of the car.
I dont think you can disassemble the two parts without breaking it. Once assembled it stays that way. It clips on and off the floor of the car with a bit more resistance than the original part." https://3dcarparts.org/library/2011/Mercedes/A-Class/floor-mat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/01a28dd6-a493-49fd-a034-6d2f7bb67c4b/images/floor-mat-clip-1_1778039980846_dunw2c.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Mercedes/A-Class/floor-mat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3fd9c59f-e6d8-49a3-888e-a46952d7a628 1985 Mercedes-Benz W124 Wagon Tail Light Bulb Holder Latch A common issue on the W124 wagon is that the retaining latch on the tail light bulb holders likes to break. This part allows you to repair the latch. I attached mine with JB Weld. https://3dcarparts.org/library/1985/Mercedes-Benz/W124%20Wagon/tail-light-bulb-holder-latch https://r2-upload.3dcarparts.workers.dev/file/parts/3fd9c59f-e6d8-49a3-888e-a46952d7a628/images/tail-light-bulb-holder-latch-1_1778039970643_rez50e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1985/Mercedes-Benz/W124%20Wagon/tail-light-bulb-holder-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4aaeff5d-27ae-4945-9ba3-d784d387a277 1984 Mercedes-Benz W124 Power Window Regulator Nut "Mercedes W124 electric window regulator
This nut is used to repair the window regulator mechanism of a W124.
It becomes brittle over time and breaks. This prevents the window from closing completely." https://3dcarparts.org/library/1984/Mercedes-Benz/W124/power-window-regulator-nut https://r2-upload.3dcarparts.workers.dev/file/parts/4aaeff5d-27ae-4945-9ba3-d784d387a277/images/power-window-regulator-nut-1_1778039959558_ma37v6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Mercedes-Benz/W124/power-window-regulator-nut?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e3e92feb-e129-4f9f-a768-8c49ce4ea631 1977 Mercedes-Benz W123 Door Seal Clip This is a model of Mercedes seal clip for W123 Coupe model, part number A0009871015 (for reference only). Measurements taken from an original part (see photo). I've used PLA for a prototype, then ASA for the final version, but I think nylon would be best. I've also made few with PETG and they were also fine. For better strength it should be printed in a horizontal position (as on attached Cura screenshot). https://3dcarparts.org/library/1977/Mercedes-Benz/W123/door-seal-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e3e92feb-e129-4f9f-a768-8c49ce4ea631/images/door-seal-clip-1_1778039952513_3rnb3u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1977/Mercedes-Benz/W123/door-seal-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d6581966-39a0-4882-a41d-9c604a8df400 2006 Mercedes Sprinter Side moulding clip "Moulding Clip you need for example Mercedes Sprinter W906 side planking
Donate: paypal.me/michaelsmylla" https://3dcarparts.org/library/2006/Mercedes/Sprinter/side-moulding-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d6581966-39a0-4882-a41d-9c604a8df400/images/side-moulding-clip-1_1778039946237_dk0a14.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Mercedes/Sprinter/side-moulding-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b104a9e0-d944-450a-b9ae-3f71e98dbbf1 1982 Mercedes-Benz 190 Tow Hook Cover Clip "Hi,
this is a replacement clip that fits to the 190 cover for the tow hook." https://3dcarparts.org/library/1982/Mercedes-Benz/190/tow-hook-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b104a9e0-d944-450a-b9ae-3f71e98dbbf1/images/tow-hook-cover-clip-1_1778039939601_upcveb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1982/Mercedes-Benz/190/tow-hook-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c81dbb4-07ed-439a-93e4-37a46b475a0f 2004 Mercedes-Benz SLK Battery Cover Retaining Clip "Locking clip for starter battery cover on Mercedes-Benz SLK R171
Battery cover fastener
MB part number A0029881242
Water deflector / air duct closure" https://3dcarparts.org/library/2004/Mercedes-Benz/SLK/battery-cover-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2c81dbb4-07ed-439a-93e4-37a46b475a0f/images/battery-cover-retaining-clip-1_1778039930811_sttjxh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2004/Mercedes-Benz/SLK/battery-cover-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-26ffd552-4c57-4bd7-a30e-25ccba8c143d 1990 Mercedes S420 Power Seat Switch Retainer Clip "These files replace the power seat switch retainer clips on W140 S420 type Mercedes from the 1990's. These clips usually break because people don't know how to properly remove them - it is tricky, and an unusual method. Also they're brittle old plastic. These will directly replace the old ones, and function identically.
I have added replacement OEM-type clips (only clips, not for use with the printable base). These are a work in progress." https://3dcarparts.org/library/1990/Mercedes/S420/power-seat-switch-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/26ffd552-4c57-4bd7-a30e-25ccba8c143d/images/power-seat-switch-retainer-clip-1_1778039913109_qfmt2e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mercedes/S420/power-seat-switch-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-63c34451-3e20-42bf-a176-02389d7a0fb8 2000 Mercedes-Benz C-Class Floor Mat Clip Remix of the 2 part A class clip. This is a single part clip to plug over the factory floor mat pin of the W203 C class Benz (see pic). If you find it fits other models, leave a comment below. https://3dcarparts.org/library/2000/Mercedes-Benz/C-Class/floor-mat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/63c34451-3e20-42bf-a176-02389d7a0fb8/images/floor-mat-clip-1_1778039898296_2pcjti.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Mercedes-Benz/C-Class/floor-mat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b9e5f591-fc25-4eb0-9604-3f472a5943c3 2002 Mercedes E-Class Rear Center AC Clip "This is a replacement AC clip that can fit Mercedes W211 center console.
A bit of filler, sanding and paint can get a really good finish
This might not fit for other AC placements, not tested" https://3dcarparts.org/library/2002/Mercedes/E-Class/rear-center-ac-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b9e5f591-fc25-4eb0-9604-3f472a5943c3/images/rear-center-ac-clip-1_1778039889468_ig0s5h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Mercedes/E-Class/rear-center-ac-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5cc0baab-096a-410c-994a-76a5b45163d7 2015 VW Crafter Glove Box Clip This glove box clip was designed for my 2015 VW Crafter but it will also fit the Mercedes Sprinter. https://3dcarparts.org/library/2015/VW/Crafter/glove-box-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5cc0baab-096a-410c-994a-76a5b45163d7/images/glove-box-clip-1_1778039882524_2kf6ag.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/VW/Crafter/glove-box-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0b5f2c51-3d8f-4826-8523-521a536e3165 2004 Mercedes-Benz A-Class / B-Class Door Card Clip "Replacement clip for door cards of Mercedes W169 A-Class and T245/W245 B-Class, possibly also Viano.
Part 270 in explosion view of parts (Mercedes VIS)
A1697270014" https://3dcarparts.org/library/2004/Mercedes-Benz/A-Class%20%2F%20B-Class/door-card-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0b5f2c51-3d8f-4826-8523-521a536e3165/images/door-card-clip-1_1778039874998_y8x1yi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Mercedes-Benz/A-Class%20%2F%20B-Class/door-card-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6b6baeac-5913-4a40-a250-1f6da460a6e1 1984 Mercedes-Benz 300E Cup Holder Base This is the base piece to a door mounted cup holder found on the Mercedes-Benz W124. 1984-1996. 300E. To access this piece, you'll need to take of the leather cover, and cork backing. My cupholder broke at the hinge point. This is a direct replacement for this OEM door mounted cupholder base. https://3dcarparts.org/library/1984/Mercedes-Benz/300E/cup-holder-base https://r2-upload.3dcarparts.workers.dev/file/parts/6b6baeac-5913-4a40-a250-1f6da460a6e1/images/cup-holder-base-1_1778039869096_woulh9.jpg in_stock 19.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Mercedes-Benz/300E/cup-holder-base?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b8086a86-c750-434b-b71a-db123eb05bb5 1991 Mercedes S-Class Curtain Clip "Reinforced, 2 versions. Both work :) I recommend the one that looks more like the original :) Plastic PETG
If you are going to sell them, at least share the profits :)" https://3dcarparts.org/library/1991/Mercedes/S-Class/curtain-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b8086a86-c750-434b-b71a-db123eb05bb5/images/curtain-clip-1_1778039860844_528dvf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Mercedes/S-Class/curtain-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a499191c-a12f-4674-8ad3-ebab1987151a 1990 Mercedes-Benz T1 Window Crank End Plate with Clip "In case you too destroyed the end plate of your window crank while trying to disassemble it: here we go.
My bus is a Mercedes 310 from 1990" https://3dcarparts.org/library/1990/Mercedes-Benz/T1/window-crank-end-plate-with-clip https://r2-upload.3dcarparts.workers.dev/file/parts/a499191c-a12f-4674-8ad3-ebab1987151a/images/window-crank-end-plate-with-clip-1_1778039851362_ebs4kq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mercedes-Benz/T1/window-crank-end-plate-with-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e32d7daf-3564-4953-bcdf-6dc37ffd4f1e 2001 Mini Cooper Rear Cup Holder Ring My recreation of the the cup holder ring for the rear cup holder of the R50 R52 and R53 Mini cooper. https://3dcarparts.org/library/2001/Mini/Cooper/rear-cup-holder-ring https://r2-upload.3dcarparts.workers.dev/file/parts/e32d7daf-3564-4953-bcdf-6dc37ffd4f1e/images/rear-cup-holder-ring-1_1778039119716_ryjsvg.jpg in_stock 11.01 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper/rear-cup-holder-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-20c77325-b91a-48db-a314-251dbfda11b2 2007 Mini Cooper Phone Mount Bracket I found the screw holes to be to thin when I initially printed the original design, so I increased the material in the screw hole. This requires a longer screw, but makes the design infinitely more stable. I ended up using a 32mm (1 1/4 in) sheet metal screw to relace the factor screws. I also thickened the arm a little to give more stability while still clearing the dash. The last touch was to blunt the end of the ball to allow for freedom of movement without the need to sand off the nub that 3D printers leave when printing spheres. all in all this was a solid design that just needed a few tweaks to be serviceable daily. I am from across the pond and designed the left hand drive model. A right hand drive file is also available. the two models are marked with an L or R to avoid printing the wrong one by accident. The marking is not visible when the mount is installed. I love it and I hope you enjoy it as well. https://3dcarparts.org/library/2007/Mini/Cooper/phone-mount-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/20c77325-b91a-48db-a314-251dbfda11b2/images/phone-mount-bracket-1_1778039113238_2swkpp.jpg in_stock 15.18 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Mini/Cooper/phone-mount-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bfa3fba0-763d-4728-8f73-1e6349c97072 1999 Mercedes-Benz SL-Class Exterior Door Cladding Trim Clip "This was specifically designed for my 1999 SL-Class r129. I have been told this same design applies to w124, and w140 models which have the Sacco accent cladding, but I am unable to confirm. (Please let me know if you can confirm this!)
This design is for the sliding clips that are found on the top portion of the trim, NOT the bottom portion, You can find the bottom portion clips for sale on amazon and ebay.
My design is superior to the OEM Mercedes Benz design, it is simpler, stronger, and easy to print in multiple materials.
Material used was Hatchbox PLA and has been tested for 3+ months in exterior Texas weather (27C-44C), and speed tested up to 233KMH without failure or loss to structural integrity.
For maximum strength, print at 15% infill, Grid Pattern, Monotonic Lines, and in vertical orientation. Anything above 15% infill will result in degraded performance. (yes this has been tested!)." https://3dcarparts.org/library/1999/Mercedes-Benz/SL-Class/exterior-door-cladding-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bfa3fba0-763d-4728-8f73-1e6349c97072/images/exterior-door-cladding-trim-clip-1_1778039105306_pv3mw3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Mercedes-Benz/SL-Class/exterior-door-cladding-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1be30a51-5720-40cb-afda-b84c15dd10c7 1984 Mercedes-Benz W124 Rear door ashtray replacement speaker enclosure "Ever wanted to install speakers in the rear doors of your Mercedes-Benz W124 Sedan without cutting any holes?
Look no further!
Theese models fit perfectly and simply replace the ashtrays in the rear door cards!
*Parts required:*
- The two models
- 3D-Printer
- 2x 10cm Speakers
*Printing instructions:*
Print the two models with the flat side facing down, for the first one, the clips should be facing upwards, while for the second one, the side that you would see in the car should be facing upwards.
The first model has some clips that have to be able to bend slightly without them snapping off!
*Note:* The two models included are for the RIGHT side! To print them for the left side, simply mirror them before printing.
*Assembly instructions:*
Once both the parts are printed, take your 10cm speakers and snap the four screw tabs off of the actual speakers frame.
Depending on the speakers you chose (we used the Kenwood KFC-S1066), you might have to remove the two rings on the bottom of the second print.
We were able to keep them.
Place your speaker inbetween the two prints and after making the speaker straight and horizontal, screw the two halves together from the back using the four screw holes provided in the prints, thus clamping the speaker inbetween.
*Installation:*
Firstly, remove the original door card ashtrays, by pressing them DOWN while they are open and then pulling them open further.
Then, using a screwdriver, carefully remove the black housing that the ash tray fit into from the door card.
you should now have a hole that you can see inside of the door through.
Route your cables (you might have to remove the door cards for this) and then wire up the speaker.
Once wired up, tilt it slightly about 15° so the top of the print (that has the round angled part on the back side) is closer to the door than the bottom.
Maneuver the speakers magnet behind the edge of the hole, and then from the top to the bottom, snap the assembly into place with the four clips.
There you go!
Have fun and enjoy the new soundscape in your W124!" https://3dcarparts.org/library/1984/Mercedes-Benz/W124/rear-door-ashtray-replacement-speaker-enclosure https://r2-upload.3dcarparts.workers.dev/file/parts/1be30a51-5720-40cb-afda-b84c15dd10c7/images/rear-door-ashtray-replacement-speaker-enclosure-1_1778039096482_lnyo65.jpg in_stock 18.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Mercedes-Benz/W124/rear-door-ashtray-replacement-speaker-enclosure?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bafd3f4a-b38a-4dab-bdb7-95d7ffbad338 1984 Mercedes-Benz W124 Cabin Filter Retrofit Frame "Custom designed cabin / pollen filter retrofit frame for Mercedes W124 models. This project allows you to add a removable cabin air filter system to vehicles that originally do not have an effective pollen filter setup.
The frame was designed by measuring the factory fresh air intake housing and modeled in CAD. It can be produced in two different ways:
Laser cut from plexiglass / acrylic sheets
3D printed directly from the included STL file
The filter media can be replaced easily by opening the frame and installing a new sheet material. You may use:
Range hood / aspirator filter material
HEPA sheet filter
Activated carbon filter sheet
Universal cabin filter media
Features:
Direct-fit style retrofit design
Reusable frame, replaceable filter media
STL file included for 3D printing
Suitable for DIY enthusiasts
Improves cabin air cleanliness
Recommended Materials:
PETG / ABS for heat resistance if 3D printing. PLA can deform in engine bay heat.
Vehicle Compatibility:
Mercedes-Benz W124 chassis (fitment may vary depending on HVAC box type and production year)
youtube video:
https://youtu.be/liK6HJO-9qo
Tags:
Mercedes, W124, cabin filter, pollen filter, retrofit, STL, laser cut, plexi, Mercedes Benz, DIY, automotive, HVAC" https://3dcarparts.org/library/1984/Mercedes-Benz/W124/cabin-filter-retrofit-frame https://r2-upload.3dcarparts.workers.dev/file/parts/bafd3f4a-b38a-4dab-bdb7-95d7ffbad338/images/cabin-filter-retrofit-frame-1_1778039087926_pmb1zs.jpg in_stock 27.91 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Mercedes-Benz/W124/cabin-filter-retrofit-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b4ccecd3-5f3a-47d9-822a-63d6633169ff 2012 Mercedes-Benz C-Class Net Clip A few of zhe Clips holding the nets mounted at the rearseats of my 2012-C-Class broke. As i couldn´t find them online i constructed and printed them. If these should break, too(passengers tend to touch them with their legs), I´ll mould them out of tin. https://3dcarparts.org/library/2012/Mercedes-Benz/C-Class/net-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b4ccecd3-5f3a-47d9-822a-63d6633169ff/images/net-clip-1_1778039082660_jlzdhi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Mercedes-Benz/C-Class/net-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bd43a833-55f7-4e17-a4e2-22acf420db06 1982 BMW 3 Series Headlight Block Off Plate Headlight block off, Prints best face down with supports for tabs, can be embossed. Confirmed to work with sealed beams and M5x20 bolts. Should also work for ellipsoids. Needs to be canted off center about 10-15 degrees for embossments to line up. Just look at the headlight mounting bracket and you'll get it. https://3dcarparts.org/library/1982/BMW/3%20Series/headlight-block-off-plate https://r2-upload.3dcarparts.workers.dev/file/parts/bd43a833-55f7-4e17-a4e2-22acf420db06/images/headlight-block-off-plate-1_1778038535327_obomdd.jpg in_stock 45.25 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1982/BMW/3%20Series/headlight-block-off-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8b118f88-d0ae-402c-b055-20f7e2f4737b 1987 BMW 3 Series Dog Net Blind Bracket Holder "BMW E30 Touring Dog Net Blind Bracket Holder Left & Right
1947897
1947898
51471947899
51471947900" https://3dcarparts.org/library/1987/BMW/3%20Series/dog-net-blind-bracket-holder https://r2-upload.3dcarparts.workers.dev/file/parts/8b118f88-d0ae-402c-b055-20f7e2f4737b/images/dog-net-blind-bracket-holder-1_1778038529318_618x15.jpg in_stock 11.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/BMW/3%20Series/dog-net-blind-bracket-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7005e838-d56c-4f86-96e7-19e6440215d5 1982 BMW 3 Series Door Latch Trim Piece trim piece for the door latch. slightly oversized but functional https://3dcarparts.org/library/1982/BMW/3%20Series/door-latch-trim-piece https://r2-upload.3dcarparts.workers.dev/file/parts/7005e838-d56c-4f86-96e7-19e6440215d5/images/door-latch-trim-piece-1_1778038524271_alqbyl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/door-latch-trim-piece?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fb632fa8-7cb1-459c-b21e-460d047a9143 1982 BMW 3 Series Sun Visor Support support piece for the sun visor. https://3dcarparts.org/library/1982/BMW/3%20Series/sun-visor-support https://r2-upload.3dcarparts.workers.dev/file/parts/fb632fa8-7cb1-459c-b21e-460d047a9143/images/sun-visor-support-1_1778038520024_wbzxpq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/sun-visor-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6302d881-ea4f-4f9b-b81b-f4c13636083c 2002 Mini Cooper S Oil Funnel "Oil funnel for Mini Cooper S R53
My print settings:
-PETG
-0.24 layers
-3 walls
-No supports" https://3dcarparts.org/library/2002/Mini/Cooper%20S/oil-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/6302d881-ea4f-4f9b-b81b-f4c13636083c/images/oil-funnel-1_1778038515344_1a40b2.jpg in_stock 20.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2002/Mini/Cooper%20S/oil-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d64c4e28-4967-4d09-aff1-8075457bf628 1994 BMW 7 Series B Pillar Trim Clip "Replacement clip posts for the upper B pillar trim on E38 BMWs. Must be printed in ABS in order to ABS cement in place. Other plastics and glues may work but it's tough to beat solvent bonding.
Instructions:
1. Trim the cross shape features on the trim to 3-5mm high.
2. Fill the bottom of the part with ABS cement
3. Push the part over the trimmed cross features until the bottom surfaces touch
4. With the cement still wet, reinstall the trim into the retaining clips WITHOUT the metal insert.
5. When dry, install the trim with the metal trim retaining clip in place." https://3dcarparts.org/library/1994/BMW/7%20Series/b-pillar-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d64c4e28-4967-4d09-aff1-8075457bf628/images/b-pillar-trim-clip-1_1778038088564_dgyvrw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/BMW/7%20Series/b-pillar-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0de050b5-f8d9-41b4-a033-3b84e91ceef6 1982 BMW 3 Series Tweeter Speaker Pods "Tweeter pods for BMW E30 3D printed speaker mount door build upgrade
Most E30s have tweeter wiring already fitted, the wires run from behind the door card into the footwell behind the main speakers.
3D printed using black ABS. I have found them very difficult to print as they warp a lot. May work with PLA but PLA can melt in a car on a hot day.
Doesn't have pins on the back for mounting like the original trim. Can be mounted either by snapping the pins off the old trim and gluing them to the printed part or by gluing the printed part directly to the door.
42mm hole is good for Alpine DDT-S30 speakers
34mm hole is good for Ground Zero GZHT 19x speakers
You will need to measure your tweeters and pick an appropriate .stl file, the measurement in the file name is the inside diameter of the hole for the tweeter.
I have also uploaded .step files for each part and a solidworks file so feel free to make changes if you need to." https://3dcarparts.org/library/1982/BMW/3%20Series/tweeter-speaker-pods https://r2-upload.3dcarparts.workers.dev/file/parts/0de050b5-f8d9-41b4-a033-3b84e91ceef6/images/tweeter-speaker-pods-1_1778038070544_c3gfet.jpg in_stock 12.02 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/tweeter-speaker-pods?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-10abdf18-dd67-4894-bd7c-f3b91158985a 1982 BMW 3 Series Center Console Storage Cubby Central recess/cubby for BMW E30 that replaces the cassette holders https://3dcarparts.org/library/1982/BMW/3%20Series/center-console-storage-cubby https://r2-upload.3dcarparts.workers.dev/file/parts/10abdf18-dd67-4894-bd7c-f3b91158985a/images/center-console-storage-cubby-1_1778038055380_o3xgmm.jpg in_stock 26.71 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/center-console-storage-cubby?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4df2c39b-099b-47ea-a590-5ee4457a3c06 1982 BMW 3 Series Switch Plate Blank BMW E30 switch plate blank https://3dcarparts.org/library/1982/BMW/3%20Series/switch-plate-blank https://r2-upload.3dcarparts.workers.dev/file/parts/4df2c39b-099b-47ea-a590-5ee4457a3c06/images/switch-plate-blank-1_1778038048206_ef0esp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/switch-plate-blank?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b62cce37-d168-4f5d-9296-8ba70f9d16ad 1982 BMW 3 Series Interior Door Handle Trim "Trim piece around the interior door handle in the BMW E30
Replicated from original BMW part" https://3dcarparts.org/library/1982/BMW/3%20Series/interior-door-handle-trim https://r2-upload.3dcarparts.workers.dev/file/parts/b62cce37-d168-4f5d-9296-8ba70f9d16ad/images/interior-door-handle-trim-1_1778038042721_ndqgqt.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/interior-door-handle-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-74a208ef-560d-4ff6-81b1-871634d878df 1982 BMW 3 Series Triangular Door Trim Panel Triangular trim panel for the front doors of BMW E30, at the side mirror mounting location. Before slicing, please increase the model by 10 times. https://3dcarparts.org/library/1982/BMW/3%20Series/triangular-door-trim-panel https://r2-upload.3dcarparts.workers.dev/file/parts/74a208ef-560d-4ff6-81b1-871634d878df/images/triangular-door-trim-panel-1_1778038036613_6qvky1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1982/BMW/3%20Series/triangular-door-trim-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-839d5673-41ea-40ac-a5bd-1346ee2caa59 1990 BMW 3 Series Low Beam LED Headlight Rear Cover "Wanted to fit some led headlights to my 1990 BMW e30, however the rear cover doesn't allow the space required, so made a quick cover that just fits to the headlight as per the original cover.
Once printed this requires a small foam seal (may be possible to reuse the original and a 16mm cable gland to provide waterproofing,
I printed with the larger open oriented up and the cable gland thread on the bed. supports on the outside only, these came off really easy, print time for myself was around 8hrs at fairly conservative speeds." https://3dcarparts.org/library/1990/BMW/3%20Series/low-beam-led-headlight-rear-cover https://r2-upload.3dcarparts.workers.dev/file/parts/839d5673-41ea-40ac-a5bd-1346ee2caa59/images/low-beam-led-headlight-rear-cover-1_1778038029654_7wnypp.jpg in_stock 16.47 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1990/BMW/3%20Series/low-beam-led-headlight-rear-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-72a69e73-4394-4a09-b72d-3c731960bd89 1982 BMW 3 Series Headrest Covering "Designed this to replace the headrest coverings for the BMW E30. It doesn't work as good as the OEM ones, but definitely do the trick.
Part numbers: 52108191245 (outer), 52101838969 (inner).
Please do provide feedback!" https://3dcarparts.org/library/1982/BMW/3%20Series/headrest-covering https://r2-upload.3dcarparts.workers.dev/file/parts/72a69e73-4394-4a09-b72d-3c731960bd89/images/headrest-covering-1_1778038020786_m4lg71.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/headrest-covering?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-784e085c-fe2b-498e-ba86-d41b0d0808b0 1982 BMW 3 Series OBC Blank Panel Use this to create mounts for other gauges like turbo https://3dcarparts.org/library/1982/BMW/3%20Series/obc-blank-panel https://r2-upload.3dcarparts.workers.dev/file/parts/784e085c-fe2b-498e-ba86-d41b0d0808b0/images/obc-blank-panel-1_1778038013785_6sjd02.jpg in_stock 13.02 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/obc-blank-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0177e5fd-d6be-4a96-878c-8260b358a7be 2005 BMW 3 Series Dashboard Trim Clip "Clip for BMW E90, E91 or E92, for dashboard trims.
Original color of clips Blue." https://3dcarparts.org/library/2005/BMW/3%20Series/dashboard-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0177e5fd-d6be-4a96-878c-8260b358a7be/images/dashboard-trim-clip-1_1778037499599_4d5j3l.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/dashboard-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ff44fa3c-dcd3-4fce-be72-4fa85b7c94f7 2001 BMW Z3 Wire Clip "This is a wire clip found on the bottom side of the hood on my BMW 2001 Z3 M Roadster. Instead of buying extras for a whopping 1$ I spend four hours learning Fusion 360 to recreate it.
Mfg Part #
61131369668
61-13-1-369-668
61 13 1 369 668
ECS Part #
ES#164358" https://3dcarparts.org/library/2001/BMW/Z3/wire-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ff44fa3c-dcd3-4fce-be72-4fa85b7c94f7/images/wire-clip-1_1778037493723_7pftp0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2001/BMW/Z3/wire-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8878bf39-28be-4712-93a3-7b956229c3b7 1997 BMW 3 Series Sunroof Curtain Slider Sunroof curtain slider for e46 https://3dcarparts.org/library/1997/BMW/3%20Series/sunroof-curtain-slider https://r2-upload.3dcarparts.workers.dev/file/parts/8878bf39-28be-4712-93a3-7b956229c3b7/images/sunroof-curtain-slider-1_1778037488801_atqj80.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/BMW/3%20Series/sunroof-curtain-slider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c413d131-5962-451a-bee8-6a322f406c55 1998 BMW 3 Series Switch Panel Expanded project with additional switches and ports for mounting USB-A and USB-C chargers https://3dcarparts.org/library/1998/BMW/3%20Series/switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/c413d131-5962-451a-bee8-6a322f406c55/images/switch-panel-1_1778037483152_qrvitn.jpg in_stock 18.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-87442738-18dd-4a5d-a802-862a5dce53ca 1995 BMW 3 Series A-Pillar Trim Clip The BMW e36 A-pillar clips are known to break off, so I made some that will fix it. They are to be epoxied on and might need heat to shape the bottom to contour to the a-pillar trim. ABS is recommended, but I only had PLA. But still works great. The actual car is a 1995 318ti, but should fit other e36's as well. I will be slowly fixing up my brittle interior one piece at a time! https://3dcarparts.org/library/1995/BMW/3%20Series/a-pillar-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/87442738-18dd-4a5d-a802-862a5dce53ca/images/a-pillar-trim-clip-1_1778037476993_dwea0h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/BMW/3%20Series/a-pillar-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ef505b32-fddc-45dd-a0c0-f374f8e99b4e 1997 BMW 3 Series Ashtray AUX Adapter Got an aux cable for my e46, decided I should make it fairly clean so I'm using the cigarette holder in the ashtray. This piece replaces the little plastic holder that just snaps into place https://3dcarparts.org/library/1997/BMW/3%20Series/ashtray-aux-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/ef505b32-fddc-45dd-a0c0-f374f8e99b4e/images/ashtray-aux-adapter-1_1778037472124_hihfo1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/BMW/3%20Series/ashtray-aux-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a81c6e75-a4cd-4565-8aa4-2a9ae1576f09 1999 BMW 3 Series Underbody reinforcement cover "This is a modell tocover the hole in the reinforcemnt underneath the oilpan.
https://www.realoem.com/bmw/enUS/showparts?id=BM31-EUR-11-1999-E46-BMW-323Ci&diagId=51_4456#51718197932" https://3dcarparts.org/library/1999/BMW/3%20Series/underbody-reinforcement-cover https://r2-upload.3dcarparts.workers.dev/file/parts/a81c6e75-a4cd-4565-8aa4-2a9ae1576f09/images/underbody-reinforcement-cover-1_1778037467436_rqy56y.jpg in_stock 19.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/BMW/3%20Series/underbody-reinforcement-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-afe74879-1b6c-4700-8d39-0fb78e686d0e 1998 BMW 3 Series Headlight Cleaning Hose Clip "fitted perfectly as to my BMW E46 Windshield/Headlight washer pump pipe fitting.
replacement of this clip
BMW Headlight Cleaning Hose Clip - Genuine BMW 61670004457
in to this hose connector
Genuine BMW Headlight Washer Hose Connector | 61668360181" https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-cleaning-hose-clip https://r2-upload.3dcarparts.workers.dev/file/parts/afe74879-1b6c-4700-8d39-0fb78e686d0e/images/headlight-cleaning-hose-clip-1_1778037461772_n6c64b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-cleaning-hose-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8e68efb6-1879-4544-822f-a504a0d40835 1997 BMW 3 Series Door Trim Clip I recently got a new (used) BMW E46 and noticed the panels that run along the top of the door had been damaged by the previous owner. Took out one of the not damaged clips and remade it in Fusion 360, then printed a handful to replace on all the doors. Worked a charm! https://3dcarparts.org/library/1997/BMW/3%20Series/door-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8e68efb6-1879-4544-822f-a504a0d40835/images/door-trim-clip-1_1778037455560_onpvyq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/BMW/3%20Series/door-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-20b73728-5e2b-4ed4-b2b4-8f3d2d1900b1 1982 BMW 3 Series Watertight Connector Terminal Shell "Repair those old connectors commonly found on BMW E30, E36, and E46 vehicles with loose terminals. The rubber overmolding on the terminals tends to disintegrate which can cause them to fall out of the housing or not make a good connection.
This replacement terminal shell is designed as two pieces and fits tightly over the terminal after the old overmolding is stripped off. Apply a small amount of silicone RTV to the terminal first to glue the shell in place and make the connection waterproof.
Print both pieces vertically to ensure that they are perfectly circular." https://3dcarparts.org/library/1982/BMW/3%20Series/watertight-connector-terminal-shell https://r2-upload.3dcarparts.workers.dev/file/parts/20b73728-5e2b-4ed4-b2b4-8f3d2d1900b1/images/watertight-connector-terminal-shell-1_1778037445512_hj27dw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1982/BMW/3%20Series/watertight-connector-terminal-shell?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f6ce6ab6-847b-4da8-a134-43788004b09b 2001 BMW 3 Series Rear Shelf Retaining Clip When I bought a E46 Compact it had broken rear shelf retaining clip. So whenever I opened the trunk the shelf would hang randomly in the air. Also it made closing the trunk hard, as it jammed between the trunk lid and the body of the car. So I decided to make a model of the broken shelf clip, that came with the car. It may need some sanding or filing to achieve a better fitment in the shelf steel tube. https://3dcarparts.org/library/2001/BMW/3%20Series/rear-shelf-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f6ce6ab6-847b-4da8-a134-43788004b09b/images/rear-shelf-retaining-clip-1_1778037438052_nwxg8o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/BMW/3%20Series/rear-shelf-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-89c40630-9644-4e51-8446-caad3333a7a9 1999 BMW 3 Series Trunk floor pull handle "Print in TPU
just use 2 screw" https://3dcarparts.org/library/1999/BMW/3%20Series/trunk-floor-pull-handle https://r2-upload.3dcarparts.workers.dev/file/parts/89c40630-9644-4e51-8446-caad3333a7a9/images/trunk-floor-pull-handle-1_1778037434372_sx7a05.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/BMW/3%20Series/trunk-floor-pull-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dd11dac4-9cc3-4d53-81bc-aade118f614f 1997 BMW 3 Series Rear Ashtray Slider Roller Cover "BMW e46 Rear Ashtray Slider Roller Cover Replacement
Printed with TPU flex filament" https://3dcarparts.org/library/1997/BMW/3%20Series/rear-ashtray-slider-roller-cover https://r2-upload.3dcarparts.workers.dev/file/parts/dd11dac4-9cc3-4d53-81bc-aade118f614f/images/rear-ashtray-slider-roller-cover-1_1778037429973_opcfnp.jpg in_stock 12.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/BMW/3%20Series/rear-ashtray-slider-roller-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e5ed2274-5921-4e8a-a67d-eb00c7c5eac2 1998 BMW 3 Series Sharkfin antenna cover "Missing your antenna?
Meassured the curvature of my E46 sedan roof and designed this sharkfin.
Depending on your printing resolution use sandpaper and filler to create a smooth surface.
MoTip spray filler did the job for me.
Order a spray can in car color to finish the job.
I glued the sharkfin to my car using Sicoflex." https://3dcarparts.org/library/1998/BMW/3%20Series/sharkfin-antenna-cover https://r2-upload.3dcarparts.workers.dev/file/parts/e5ed2274-5921-4e8a-a67d-eb00c7c5eac2/images/sharkfin-antenna-cover-1_1778037424009_tf5ko5.jpg in_stock 15.51 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/BMW/3%20Series/sharkfin-antenna-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f339bf4-1cab-4068-b7c9-98f37577fa00 1998 BMW 3 Series Headlight Upper Mounting Repair Clip "This is a repair clip for the upper portion of the BMW E46 headlights. I have had 3 break on me and didn't want to spend 1-3$ for other peoples models. You may have to grind your headlight down where your tab broke off to fit this properly. Ensure to use a good epoxy, or similar plastic to weld it onto the stock housings.
I am unsure of what the stock E46 housings are made of. Printing the clip with that same material and plastic welding it on is the best/most permanent solution." https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-upper-mounting-repair-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8f339bf4-1cab-4068-b7c9-98f37577fa00/images/headlight-upper-mounting-repair-clip-1_1778037420574_wygda8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-upper-mounting-repair-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-66e5f33f-0018-47d8-b0ca-f324776a7ffe 2005 BMW 3 Series Dash panel fastener "Designed this ""bolt"" for my BMW E46 Sedan 2005 and it fits like a glove.
Printing:
Whatever really, I used a Flashforge Adventure 3 and used the standard settings but chose the low (fast) selection since it started as a prototype but it worked out just fine the way it was. But would I print this today, almost 3 years later, I would make it 80 - 100% infill and likely use ABS.
Used PLA
Feel free to use however you wish, made by me." https://3dcarparts.org/library/2005/BMW/3%20Series/dash-panel-fastener https://r2-upload.3dcarparts.workers.dev/file/parts/66e5f33f-0018-47d8-b0ca-f324776a7ffe/images/dash-panel-fastener-1_1778037416677_xkdwfx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/dash-panel-fastener?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e8f318a-8aef-4743-a164-67db12206b32 1997 BMW 3 Series Alarm Bracket Roof "BMW 3 SERIES E46
ABS / PC ALARM BRACKET
FIT IN THE ROOF
BMW PART NUMBER 51.44.8.243.666 / 8.249.978" https://3dcarparts.org/library/1997/BMW/3%20Series/alarm-bracket-roof https://r2-upload.3dcarparts.workers.dev/file/parts/1e8f318a-8aef-4743-a164-67db12206b32/images/alarm-bracket-roof-1_1778037411249_rsnm3g.jpg in_stock 14.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/BMW/3%20Series/alarm-bracket-roof?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-39ed214c-7dfb-4bad-8468-1e0e7e8ccafb 1997 BMW 3 Series Sunroof Shade Slider "This thing can fix the problem with part nr. 54 13 8 246 027
Instead of buying the ""kinda expensive"" set for sunroof fix, i have decided to print the broken piece and fix it on my own.
Not perfect, without rubber ends, but it somehow fixes the problem with sunroof sliding of the rails.
Use PET or ABS because of high temperature exposure.
I just used the broken part, got rid of all the plastic part with pliers and replaced it with this print.
Test fit it and before use, add a drop of some glue.
!!!! Always put some grease into the rails for propper movement !!!!
Links are not mine, just sharing
Some explanations here -> http://www.lincomatic.com/e46sunroof/e46sunroof.html
Video here -> https://www.youtube.com/watch?v=_XlTqpxUJgs" https://3dcarparts.org/library/1997/BMW/3%20Series/sunroof-shade-slider https://r2-upload.3dcarparts.workers.dev/file/parts/39ed214c-7dfb-4bad-8468-1e0e7e8ccafb/images/sunroof-shade-slider-1_1778037404060_h2xlle.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/BMW/3%20Series/sunroof-shade-slider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a0766543-d473-40fd-9d92-2dce4aaa88c3 2005 BMW 3 Series Console Ashtray Cigarette Adapter Plate "When I bought my e91 it had no front console cigarette lighter which meant I had to use an after market accessory plugged into the armrest socket. The unit was then wedged between the console and the passenger seat. Less than ideal.
This plate fits in the ashtray hole and has a cut-out to accept an after market twin socket adapter which can be commonly found online or in value stores.
I desinged this in sketchup and have included the SKP file in case anyone would like to remix it.
Happy Printing" https://3dcarparts.org/library/2005/BMW/3%20Series/console-ashtray-cigarette-adapter-plate https://r2-upload.3dcarparts.workers.dev/file/parts/a0766543-d473-40fd-9d92-2dce4aaa88c3/images/console-ashtray-cigarette-adapter-plate-1_1778037012464_pmsf84.jpg in_stock 7.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/console-ashtray-cigarette-adapter-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3819bce1-6d76-4d1c-893c-2ca3ee19bdca 2005 BMW 3 Series Vent Clip A design I used to replace the broken vent clips on my car. It's one piece that does not require you to remove anything to replace. I'm not sure how the function compares to the original clips because they were all broken on my car when I got it. However, it functions decently, and looks alright. Orient with the prongs on top. https://3dcarparts.org/library/2005/BMW/3%20Series/vent-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3819bce1-6d76-4d1c-893c-2ca3ee19bdca/images/vent-clip-1_1778037000637_ierc0g.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/vent-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7bcd8923-3b09-48b5-98df-b82c3efc0d12 2009 BMW 3 Series AUX Bracket 2009 BMW 328i AUX unit bracket. This will help fix the AUX unit that keeps popping out. https://3dcarparts.org/library/2009/BMW/3%20Series/aux-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/7bcd8923-3b09-48b5-98df-b82c3efc0d12/images/aux-bracket-1_1778036996082_mbhth9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2009/BMW/3%20Series/aux-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c44bba0e-e08e-48d9-8402-ccfdae9d27eb 1997 BMW 3 Series / X5 Door Trim Clip "A replacement for door trim clip (Plug-in retainer OEM: 07149158194 or 51418215806 in newer models) for BMW's:
3' E90 (02/2004 — 09/2008)
3' E90 LCI (07/2007 — 02/2012)
3' E91 (02/2004 — 08/2008)
3' E91 LCI (07/2007 — 05/2012)
3' E92 (05/2005 — 02/2010)
3' E92 LCI (11/2008 — 06/2013)
3' E93 (09/2005 — 02/2010)
3' E93 LCI (11/2008 — 10/2013)
X5 E53 (10/1998 — 09/2006)
3' E46 (04/1997 — 12/2018)
3' E90 (02/2004 — 09/2008)
3' E90 LCI (07/2007 — 02/2012)
3' E91 (02/2004 — 08/2008)
3' E91 LCI (07/2007 — 05/2012)
3' E92 (05/2005 — 02/2010)
3' E92 LCI (11/2008 — 06/2013)
3' E93 (09/2005 — 02/2010)
3' E93 LCI (11/2008 — 10/2013)
X5 E53 (10/1998 — 09/2006)
Fits perfectly. If you have well calibrated printer of course :)" https://3dcarparts.org/library/1997/BMW/3%20Series%20%2F%20X5/door-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/c44bba0e-e08e-48d9-8402-ccfdae9d27eb/images/door-trim-clip-1_1778036992194_kfjnkk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/BMW/3%20Series%20%2F%20X5/door-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b947ba46-39bf-446d-889a-269e503a1fc4 2005 BMW 3 Series 12V socket cover plug Printed in PETG, should fit all BMW E9X 3 series and possibly other models form these years too https://3dcarparts.org/library/2005/BMW/3%20Series/12v-socket-cover-plug https://r2-upload.3dcarparts.workers.dev/file/parts/b947ba46-39bf-446d-889a-269e503a1fc4/images/12v-socket-cover-plug-1_1778036986201_1gyde2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/12v-socket-cover-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a504a8eb-4a1d-4136-ace5-a1bedb1de3fa 2005 BMW 3 Series Ashtray Blank Plate "This a plate to fill the Ashtry pocket. You can then cut holes to add in any usb port or etc.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/gLUaUEyaI50" https://3dcarparts.org/library/2005/BMW/3%20Series/ashtray-blank-plate https://r2-upload.3dcarparts.workers.dev/file/parts/a504a8eb-4a1d-4136-ace5-a1bedb1de3fa/images/ashtray-blank-plate-1_1778036982071_zml0y8.jpg in_stock 28.18 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/ashtray-blank-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aeaaeb51-c600-42e7-81af-22e6607a4586 2004 BMW 3 Series Center console cup holder insert I found nice idea of cupholder but not perfect. After print model i was disapointed and decise to make my own scan and model. My model fit much better to the space, in the next version will be prerfect. Also i made space for bluetooth module. At the end i make all 3 cup size in one, and it works. https://3dcarparts.org/library/2004/BMW/3%20Series/center-console-cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/aeaaeb51-c600-42e7-81af-22e6607a4586/images/center-console-cup-holder-insert-1_1778036944956_lscfgc.jpg in_stock 29.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/BMW/3%20Series/center-console-cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ee49c5f3-78d4-43f5-80ec-a5b8abf86d08 2003 BMW 5 Series Console cover clip "I edited the clip for E90 made by mrhaze222 so that it would fit in E60 console cover.
it should be tight enough to twist it in the hole and strong enough to handle the metal rod,it may get loose a bit if you're planning on taking the cover often so if you want it to hold on longer and be tighter/stronger then you might aswell use the ABS filament but PLA should be enough.
It perfectly fits in BMW E60 2003 so it should fit aswell in other models" https://3dcarparts.org/library/2003/BMW/5%20Series/console-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ee49c5f3-78d4-43f5-80ec-a5b8abf86d08/images/console-cover-clip-1_1778036936988_7sdovi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2003/BMW/5%20Series/console-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ed9d6cb4-4ce5-47d5-808d-dbeb89370443 2005 BMW 3 Series Interior rotary fastener knob "Thank you EdgewoodEngPLTW, his playlist https://www.youtube.com/watch?v=yb1C0IehEmk&list=PL70CpLomQ8tEVTrR7WAqKndqHEtRm_aSs taught me how to work with onshape.
I am absolutely new to 3D printing, this design works but not perfect.
It is designed with onshape, if you want the original file, please let me know, i can share it to you (seems it is not possible to export a editable cad file)" https://3dcarparts.org/library/2005/BMW/3%20Series/interior-rotary-fastener-knob https://r2-upload.3dcarparts.workers.dev/file/parts/ed9d6cb4-4ce5-47d5-808d-dbeb89370443/images/interior-rotary-fastener-knob-1_1778036921899_1go46e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/interior-rotary-fastener-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e477f220-d9c9-4fc6-a8dc-a522d0709766 1988 BMW 5 Series Headlamp Clip BMW e34 headlamp clip № 191 941 142 https://3dcarparts.org/library/1988/BMW/5%20Series/headlamp-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e477f220-d9c9-4fc6-a8dc-a522d0709766/images/headlamp-clip-1_1778036914893_o5ae2l.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1988/BMW/5%20Series/headlamp-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-37eb7ca1-426a-4df8-a144-9c4fbc19f7f2 1982 BMW 3 Series Trim Clip and Pin Recreated the trim clip and pin for exterior door trim on a BMW E30 https://3dcarparts.org/library/1982/BMW/3%20Series/trim-clip-and-pin https://r2-upload.3dcarparts.workers.dev/file/parts/37eb7ca1-426a-4df8-a144-9c4fbc19f7f2/images/trim-clip-and-pin-1_1778036908200_bhcf48.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1982/BMW/3%20Series/trim-clip-and-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d9326077-b882-4dca-8db9-011f7b92e02b 2005 BMW 3 Series Trunk oil bottle and funnel holder "Loved the original design but it was meant for the OEM BMW Oil, I prefer LiquiMoly so I remixed it for such
With the dimension changes there was little point in leaving the storage pocket so I decided to add a peg for holding a funnel
No longer need to keep oil bottles in my floor board! Tested this by taking some hard turns and everything is still there lol
All credit to the creator of the original model
Enjoy" https://3dcarparts.org/library/2005/BMW/3%20Series/trunk-oil-bottle-and-funnel-holder https://r2-upload.3dcarparts.workers.dev/file/parts/d9326077-b882-4dca-8db9-011f7b92e02b/images/trunk-oil-bottle-and-funnel-holder-1_1778036902396_2th4bf.jpg in_stock 30.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/trunk-oil-bottle-and-funnel-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3d74497e-d433-41a3-9b1b-2bb6360ddd1e 2008 BMW X3 Wiring Harness Clip I lost one of the clips that holds the harness to the bar that is at the back of the engine in my 2008 BMW X3. I had the center plug but not the outer part. So I made one. Its the one on the left. The one on the right is the OEM https://3dcarparts.org/library/2008/BMW/X3/wiring-harness-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3d74497e-d433-41a3-9b1b-2bb6360ddd1e/images/wiring-harness-clip-1_1778036898776_4p3fbb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2008/BMW/X3/wiring-harness-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-053cd527-b6a8-4425-9b32-f19fd8fa8e5e 2005 BMW 3 Series Vent Louver Connector "This connector moves all the louvers in the vent together. Originally is made of metal and super thin.
Printed with 100% infill" https://3dcarparts.org/library/2005/BMW/3%20Series/vent-louver-connector https://r2-upload.3dcarparts.workers.dev/file/parts/053cd527-b6a8-4425-9b32-f19fd8fa8e5e/images/vent-louver-connector-1_1778036893858_gpuyz7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/vent-louver-connector?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d940d73b-e073-4e1d-8401-459a79f60032 2011 BMW 3 Series Intake Manifold Cover Bushing I couldn't see paying $5.99 a piece for these tiny rubber boots. This possibly could be used for other years / models, but this is the car that I have. I have attached the FreeCAD files so you can modify for your specific application. I haven't been able to print it yet, But I plan on printing it with TPU. https://3dcarparts.org/library/2011/BMW/3%20Series/intake-manifold-cover-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/d940d73b-e073-4e1d-8401-459a79f60032/images/intake-manifold-cover-bushing-1_1778036889232_m6fpx5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2011/BMW/3%20Series/intake-manifold-cover-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b54f8b7e-78f2-4bcd-a5fc-ae3db4208345 1990 BMW 3 Series Glove Box Trim Clip This is a fix for the bmw e36 glove box trim which is prone to falling off due to the clip becoming brittle and snapping off. This fix requires you to trim off the old clip and epoxying the 3d printed part in its place. https://3dcarparts.org/library/1990/BMW/3%20Series/glove-box-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b54f8b7e-78f2-4bcd-a5fc-ae3db4208345/images/glove-box-trim-clip-1_1778036885320_8js76f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/BMW/3%20Series/glove-box-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7834ce16-e481-479e-9862-f362b42abbd2 1988 BMW 5 Series HVAC Climate Control Actuator Clip "Needed a clip for my E34 BMW climate control actuators.
1 was missing and one was not so I made a copy of the original.
Clips in to actuator and the arm to move the flaps clips into this." https://3dcarparts.org/library/1988/BMW/5%20Series/hvac-climate-control-actuator-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7834ce16-e481-479e-9862-f362b42abbd2/images/hvac-climate-control-actuator-clip-1_1778036880927_reqw5o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1988/BMW/5%20Series/hvac-climate-control-actuator-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b6849f79-4b03-4c8f-b30c-44fbc9a814fc 2006 BMW 3 Series AC Delete Block-Off Ports "Block off models for the N52 AC Compressor as well as the lines going into the cabin for a 2006 E90 330i. I included an o-ring and a no o-ring variant of each block off so you can use choose to use each of them as a temporary or a permanent block off. I have made the o-ring variants such that you should be able to use the o-rings off of the stock AC hard lines to fully seal off the systems.
I printed these on a Bambu P1S with a 4mm extruder and 100% infill using ABS filament. If you want temporary blocks offs, PLA is fine, but if you intend to actually run them in your car, the engine bay will get hot and potentially melt a weaker plastic and can cause unwanted issues.
If you are going to run the AC Compressor block offs in the car, it is critical that you put a heat shield over the printed parts otherwise they are definitely going to melt everywhere as the AC Compressor sits right underneath the hot exhaust headers on the N52. I grabbed an old piece of underbody heat shield from a part out E90, drilled a hole in it to pass a bolt through it and the block off into the compressor, and cut and bent the shield into place so it wouldn't melt. I have ran it on my '06 E90 at a couple drift events with no issues, and the engine bay was getting extremely hot on those days. I am aware most people won't bother with the AC Compressor ports, but for folks like me who want to remove dead weight but cannot find an appropriate AC delete belt, this is an okay interim solution." https://3dcarparts.org/library/2006/BMW/3%20Series/ac-delete-block-off-ports https://r2-upload.3dcarparts.workers.dev/file/parts/b6849f79-4b03-4c8f-b30c-44fbc9a814fc/images/ac-delete-block-off-ports-1_1778036871833_56dnao.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2006/BMW/3%20Series/ac-delete-block-off-ports?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b59d874c-29e3-4997-835b-a267d1e73d8e 2004 BMW 5 Series Headliner Clip "EDITED! THIS IS THE ACCURATE MEASUREMENTS.
FITS PERFECT!
LxBxH 30x15x20mmm
Broke some clips when i took down some of my headliner, and could not find any so i made drawn and made some.
Clips for headliner in BMW E60 an E61." https://3dcarparts.org/library/2004/BMW/5%20Series/headliner-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b59d874c-29e3-4997-835b-a267d1e73d8e/images/headliner-clip-1_1778036859614_c4m5et.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/BMW/5%20Series/headliner-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-88d6ecba-1d90-4b63-a797-42aa3f741792 1995 BMW 5 Series C-Pillar Cover Clip "The C-Pillar cover of E39 Limousine is quite fragile and tends to break quite easily once the plastic (ABS) weakens. This is for the pre-face lift models (1995 - 1998), BMW has improved the construction of the panels with the face lift, maybe the replacement parts can also be used there.
This is a replacement for the front and back clip support.
The support pieces are for the back clips. Once the pin is installed, you can add the support in order to reduce / distribute the forces that act on the pin.
BMW Part Numbers:
* 51432491495
* 51432491496
* 51438207835
* 51438207836
* 51438207837
* 51438207838
EDIT 2023/09/26: Updated to properly fit lights
EDIT 2024/09/08: Updated files, added front support" https://3dcarparts.org/library/1995/BMW/5%20Series/c-pillar-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/88d6ecba-1d90-4b63-a797-42aa3f741792/images/c-pillar-cover-clip-1_1778036850348_pfxvqo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/BMW/5%20Series/c-pillar-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-61654316-f0dc-458f-8599-0a0f98e5b483 2008 BMW 1 Series Vent Cup Holder Clip "Remixed from https://www.thingiverse.com/thing:328000
Wanted to use this vent cup holder, unfortunately the clip doesn't fit my BMW E88 (2008 1 Series convertible)
This clip fits and snaps into place. Use it together with the top and bottom parts of the original one." https://3dcarparts.org/library/2008/BMW/1%20Series/vent-cup-holder-clip https://r2-upload.3dcarparts.workers.dev/file/parts/61654316-f0dc-458f-8599-0a0f98e5b483/images/vent-cup-holder-clip-1_1778036839450_04nlap.jpg in_stock 456.78 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/BMW/1%20Series/vent-cup-holder-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bbd8afd0-ae88-4eb5-8eb4-a5f1746977f0 1968 BMW 2002 Side Body Trim Retainer Clip Side Body Trim Retainer Clip for BMW 2002. https://3dcarparts.org/library/1968/BMW/2002/side-body-trim-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bbd8afd0-ae88-4eb5-8eb4-a5f1746977f0/images/side-body-trim-retainer-clip-1_1778036834200_jq4rrr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1968/BMW/2002/side-body-trim-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f269ad21-a872-41e3-9f8a-58fa50c22b49 1997 BMW 3 Series Positive Terminal Cover "Cover to change the broken one for the positive borne.
If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design.
Thanks, Enjoy!" https://3dcarparts.org/library/1997/BMW/3%20Series/positive-terminal-cover https://r2-upload.3dcarparts.workers.dev/file/parts/f269ad21-a872-41e3-9f8a-58fa50c22b49/images/positive-terminal-cover-1_1778036219845_92twgq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1997/BMW/3%20Series/positive-terminal-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-65c1e0dc-83f9-4db1-a5b4-37aa854f524c 1999 BMW 3 Series Mirror Riser Adapter "i bought RHD mirrors to my LHD e46 non-M Coupe and I created this raisers in order to get a better view angles (close to regular mirrors).
This can be use to rise the angle of either side of the mirror and can be used in both mirrors.
So with this you can ""transform"" RHD to LHD and viceversa." https://3dcarparts.org/library/1999/BMW/3%20Series/mirror-riser-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/65c1e0dc-83f9-4db1-a5b4-37aa854f524c/images/mirror-riser-adapter-1_1778036216072_hhzwg0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/BMW/3%20Series/mirror-riser-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-99d753ba-2469-4782-9b8d-1e92d4db2a9b 1997 BMW 3 Series Fuse Removal Tool "This is a copy of the original e46 fuse removal tool. Tested and do what it should :-)
It fits nicely in the holder just like the original.
Don't use PLA, but rather PETG or ABS, due to the intense heat in the car in the summer.
Enjoy" https://3dcarparts.org/library/1997/BMW/3%20Series/fuse-removal-tool https://r2-upload.3dcarparts.workers.dev/file/parts/99d753ba-2469-4782-9b8d-1e92d4db2a9b/images/fuse-removal-tool-1_1778036212177_2hrzer.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1997/BMW/3%20Series/fuse-removal-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-86b85a13-c5e7-4491-994b-c544bcc41b5e 1999 Audi TT Central Console Bolt Plug Print sideways for best result (with supports) https://3dcarparts.org/library/1999/Audi/TT/central-console-bolt-plug https://r2-upload.3dcarparts.workers.dev/file/parts/86b85a13-c5e7-4491-994b-c544bcc41b5e/images/central-console-bolt-plug-1_1777970237234_xrlpqx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Audi/TT/central-console-bolt-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-88e46de2-13dc-4414-b55d-f31de40c2ef8 2006 Audi TT Coat Hook "Coat hook that attaches to the headrest posts of the MK2 TT.
Requires:
2 - M3x35mm screws
2 - M3 nuts" https://3dcarparts.org/library/2006/Audi/TT/coat-hook https://r2-upload.3dcarparts.workers.dev/file/parts/88e46de2-13dc-4414-b55d-f31de40c2ef8/images/coat-hook-1_1777970232360_q9bvgt.jpg in_stock 15.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Audi/TT/coat-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dbd29c7e-174a-44fc-9fc8-1dac686f96f1 1994 Audi A8 Sunvisor Clip Replace that broken sunvisor clip on your A8 or S8. Might work for other models, too. https://3dcarparts.org/library/1994/Audi/A8/sunvisor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/dbd29c7e-174a-44fc-9fc8-1dac686f96f1/images/sunvisor-clip-1_1777970227872_uf0nsc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A8/sunvisor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-019e29ee-cb25-42d4-a536-846c895ac52b 1973 Audi Fox Chrome Trim Clip "There is a strip of chrome that runs along the bottom edge of the front doors on the B1 Audi Fox. The standard clip is installed through the sheet metal and twisted into the rubber window seal, and the short version is for the front under the triangle vent window where it latches only onto the sheet metal.
Don't know the part number for this part, as I couldn't find it on a parts diagram" https://3dcarparts.org/library/1973/Audi/Fox/chrome-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/019e29ee-cb25-42d4-a536-846c895ac52b/images/chrome-trim-clip-1_1777970222341_karp82.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1973/Audi/Fox/chrome-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a84565c4-9b85-481d-a832-c05902070d58 1998 Audi TT Battery Cover Bracket "Replacement for broken brackets on the battery cover 8N0937557 of the Audi TT 8N.
More about this (in German) at https://auditt8n.blogspot.com/2023/07/tragerplatte-8n0937557-halter.html" https://3dcarparts.org/library/1998/Audi/TT/battery-cover-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/a84565c4-9b85-481d-a832-c05902070d58/images/battery-cover-bracket-1_1777970218530_yiicq1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1998/Audi/TT/battery-cover-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6ca84cb4-01b1-4d2c-8ec0-b9ec017234f7 2003 Audi A3 Bulb Cover Clip "This is only the ""Clip"" of the bulb cover. Recommend to print it ""wider"", becouse for me it was a too big of a gap where i had to glue it. I used ""UHU"" All purpose adhesive and it worked fine." https://3dcarparts.org/library/2003/Audi/A3/bulb-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/6ca84cb4-01b1-4d2c-8ec0-b9ec017234f7/images/bulb-cover-clip-1_1777970214512_im7diw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2003/Audi/A3/bulb-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b58bfc6d-f4f6-4dca-89fe-9f7a6a3fb430 2002 Audi A6 Cup Holder Radio Mount "Here is a really practical tool for mounting a Yeasu FT-2D handheld radio in the cup holder of VAG vehicles such as: Audi, VW, Seat and Skoda.
Tested on an Audi A6 C5 from 2002.
The holder is equipped with a snap-in button for the belt clip so that the radio cannot fall out of the holder even in the event of major vibrations.
Have fun with it." https://3dcarparts.org/library/2002/Audi/A6/cup-holder-radio-mount https://r2-upload.3dcarparts.workers.dev/file/parts/b58bfc6d-f4f6-4dca-89fe-9f7a6a3fb430/images/cup-holder-radio-mount-1_1777970197363_r9m28p.jpg in_stock 29.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Audi/A6/cup-holder-radio-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-623deeeb-fcbe-4c4c-b5ec-a0c212f64d90 1998 BMW 3 Series Door Sill Trim Clip "I think it's self-explanatory, I've installed it multiple times and it holds.
Align it when mounting so it doesn't break when attaching ;)" https://3dcarparts.org/library/1998/BMW/3%20Series/door-sill-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/623deeeb-fcbe-4c4c-b5ec-a0c212f64d90/images/door-sill-trim-clip-1_1777969978987_ujicis.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/door-sill-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f4017989-f55e-4107-9488-0235557af8d2 1998 BMW 3 Series Sun Visor Bracket Sun visor bracket for BMW E46. https://3dcarparts.org/library/1998/BMW/3%20Series/sun-visor-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/f4017989-f55e-4107-9488-0235557af8d2/images/sun-visor-bracket-1_1777969975932_v56usi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/sun-visor-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-52c6354c-7d03-4451-b14f-4d604f82b04e 1998 BMW 3 Series Headlight Washer Cap "BMW E46 Headlight washer cap (left side)
BMW part number: 6167.8.256.179" https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-washer-cap https://r2-upload.3dcarparts.workers.dev/file/parts/52c6354c-7d03-4451-b14f-4d604f82b04e/images/headlight-washer-cap-1_1777969971638_4hw6gv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-washer-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b32d0a0f-b1e4-4119-ae99-6810a06139e7 1998 BMW 3 Series Ashtray Slider If you need to replace the original one with this new custom made, inspired on the original curtain. https://3dcarparts.org/library/1998/BMW/3%20Series/ashtray-slider https://r2-upload.3dcarparts.workers.dev/file/parts/b32d0a0f-b1e4-4119-ae99-6810a06139e7/images/ashtray-slider-1_1777969968016_s0kmrw.jpg in_stock 17.88 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/ashtray-slider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c2c9b8dd-59a7-4ce6-9264-6ea9f42de063 1998 BMW 3 Series 52mm Gauge Panel "e46 52mm gauge panel. There is no way back to stock with this part.
I think this was best solution for 52mm gauges. I did not want to block any of the AC vents with holes or gauges and there was no other place to put these so I improvisied.
!!!!!!!!!!! Requires to cut out ash tray and cigarette lighter part. !!!!!!!!!!
I did mine with torch and knife." https://3dcarparts.org/library/1998/BMW/3%20Series/52mm-gauge-panel https://r2-upload.3dcarparts.workers.dev/file/parts/c2c9b8dd-59a7-4ce6-9264-6ea9f42de063/images/52mm-gauge-panel-1_1777969964368_43sn22.jpg in_stock 12.95 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/52mm-gauge-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d6f119fd-8fcf-4bb0-8fc3-83fddb4f5723 1998 BMW 3 Series Front Ashtray Coin Holder An euro coins holder designed to take place in the front ashtray of a BMW E46. https://3dcarparts.org/library/1998/BMW/3%20Series/front-ashtray-coin-holder https://r2-upload.3dcarparts.workers.dev/file/parts/d6f119fd-8fcf-4bb0-8fc3-83fddb4f5723/images/front-ashtray-coin-holder-1_1777969960551_ogcd3h.jpg in_stock 17.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/front-ashtray-coin-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3ce8bd61-cb3e-41d6-949d-93acd9340f9e 1998 BMW 3 Series Fog Light Side Mesh Grille "BMW E46 Fog Light Side Grille
Mesh grille
Take measurements and print with PETG, this is the closed version, the open version coming soon" https://3dcarparts.org/library/1998/BMW/3%20Series/fog-light-side-mesh-grille https://r2-upload.3dcarparts.workers.dev/file/parts/3ce8bd61-cb3e-41d6-949d-93acd9340f9e/images/fog-light-side-mesh-grille-1_1777969956986_mps4k2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/BMW/3%20Series/fog-light-side-mesh-grille?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf157d73-f5b6-44f3-a93b-4f17d7da14aa 1998 BMW 3 Series Headlight Wiring Harness Cable Clip "5mm Cable Holder Headlight Bracket Wiring Harness Trim Clip
cable clips used to hold the headlight wiring under the hood, redesigned to be easy printable
OEM: 61138350827" https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-wiring-harness-cable-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bf157d73-f5b6-44f3-a93b-4f17d7da14aa/images/headlight-wiring-harness-cable-clip-1_1777969953423_gmd8ax.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1998/BMW/3%20Series/headlight-wiring-harness-cable-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-187ec74d-cb3a-4c1f-b744-bb6167d3e4e3 1998 BMW 3 Series Rear Armrest Cup Holder Insert "Cupholder insert for the rear armrest of BMW E46.
The backing is inserted under the leather. Use the backing to mark the location for your cuts. A single slit in the center ""web"" is also needed to get the backing into the armrest. Carve out the foam as needed to clear the cupholder. Insert the backing, insert the cupholder and use 6 wood screws to hold them together. The screws I used have 4mm outer thread." https://3dcarparts.org/library/1998/BMW/3%20Series/rear-armrest-cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/187ec74d-cb3a-4c1f-b744-bb6167d3e4e3/images/rear-armrest-cup-holder-insert-1_1777969946916_h8yele.jpg in_stock 29.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/rear-armrest-cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6fcf8067-a011-4856-b0e2-a459a1a87dc2 1998 BMW 3 Series LED Headlight Bulb Adapter "Adapter to fit LED headlight bulbs in a BMW E46 halogen headlight.
Although I printed the test versions from PLA, definitely use other types of plastic, as PLA warped to an unusable state in about a month.
Attached is the Fusion 360 file as well. I won't be able to finish this project as I no longer have the car." https://3dcarparts.org/library/1998/BMW/3%20Series/led-headlight-bulb-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/6fcf8067-a011-4856-b0e2-a459a1a87dc2/images/led-headlight-bulb-adapter-1_1777969939295_b6p8ov.jpg in_stock 7.23 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1998/BMW/3%20Series/led-headlight-bulb-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c48685b6-b18c-4b27-8249-84c94503ac23 1998 BMW 3 Series Seat Back Trim Clip this is the upper clip for the back of the front seats on bmw e46. it fits perfectly https://3dcarparts.org/library/1998/BMW/3%20Series/seat-back-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/c48685b6-b18c-4b27-8249-84c94503ac23/images/seat-back-trim-clip-1_1777969936041_0v9w0u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/seat-back-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c6a7c0bf-d0e2-4160-94f5-ddb785495070 2002 BMW 3 Series Facelift Kidney Grille Clips "This is an updated set of Murat's clips which fit on the facelifted E46 kidney grills (My car is a 2002 325i wagon) and work without any filing / cutting / modification of the 3D printed part.
How to use:
Follow Murat's instructions for trimming the existing clip sockets on the kidney grill plastic (leaving ~1mm left + socket depth). Install as suggested by them (use a small flathead screwdriver or similar to pry the metal tabs of the hood into the printed groove on the clips.
My printed parts are numbered and lettered to indicate where they go on the grill. How to read the number/lettering:
When standing in front of the car and looking at the grill, there is a Left and Right grill. On each grill, there are 6 possible mounting locations. On each grill (L & R) I have called the outside-most edge (closest to the headlights) location 1. Traveling towards the center of the car, and along the top edge of the grill, you will find locations 2 & 3, and then at the inside-most edge, location 4. On the bottom, you will find locations 5 & 6. Said in a different way: Counting from the outside edge at 1, the Left grill is ascending clockwise and the Right grill is ascending counterclockwise.
I've only made clips for locations 3,4 and 5 because this seemed adequate to hold the grills and I was tired of committing time to this project. Will update if they ever fail." https://3dcarparts.org/library/2002/BMW/3%20Series/facelift-kidney-grille-clips https://r2-upload.3dcarparts.workers.dev/file/parts/c6a7c0bf-d0e2-4160-94f5-ddb785495070/images/facelift-kidney-grille-clips-1_1777969928604_kt587w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/BMW/3%20Series/facelift-kidney-grille-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7a70ed9-4f83-4c12-a08e-0371a3adc49a 2006 Audi TT Glove Box Handle Repair Fixing Bracket "Fixing handle, glove box
Handle repair, clipped or glued.
Glove box handle bracket, Audi TT 8J.
Handle repair, to be clipped or glued.
https://youtu.be/aPimloGyFUE" https://3dcarparts.org/library/2006/Audi/TT/glove-box-handle-repair-fixing-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/f7a70ed9-4f83-4c12-a08e-0371a3adc49a/images/glove-box-handle-repair-fixing-bracket-1_1777969294163_vjhxht.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Audi/TT/glove-box-handle-repair-fixing-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dfbdacde-cbd1-4c55-b4de-b8e25aea795a 1998 Audi TT Dome Map Light Clip "When Audi designed the map light for the MK1 TT, they engineered some plastic clips which hold the dome light assembly in place and then used a lever-type design to secure the lense in place. Fast forward 20 years and the plastic gets brittle and breaks.
The dome light in my 2001 Audi TT has been broken for some time. The plastic clips which hold it in place broke off before I had it and the map light assembly would kinda flop around in the headliner. The lens had one of its plastic mounting tabs broken but the other was intact so I lived with it.
While cleaning it a few days back, I broke the other clip on the lens. It will no longer stay on the roof. Gravity takes hold. A new light, if you can find one, runs about $180 from Audi. No thank you. So I designed a couple of little clips that are glued to the lens and to the dome light assembly which replace the original design and hold everything in place like it should be.
I've included three files. One is for the little l-shaped clips which hold the dome light assembly. These glue into the channels in the light housing where the old clips were before they broke off. Hopefully you can see that in the photos. The other two files are for clips which are glued to the remaining stub on the lens. There is one for the left and one for the right; they are mirror images.
These are really easy to print. Lay them flat on your build plate and print using ABS. PLA will melt in the sun and fail. Lightly sand the surfaces and apply some epoxy to glue in place. Clamp with clothes pins. Enjoy the fact that a few minutes worth of time saved you $180." https://3dcarparts.org/library/1998/Audi/TT/dome-map-light-clip https://r2-upload.3dcarparts.workers.dev/file/parts/dfbdacde-cbd1-4c55-b4de-b8e25aea795a/images/dome-map-light-clip-1_1777969287854_xkhb59.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/dome-map-light-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54081879-aa6c-4ba5-b08c-60bcef509495 1998 Audi TT Roof Courtesy Light Holder Locking Pin Repair "The roof courtesy light holder in my Audi TT mk1 was totally free when I bought it. The problem was with two locking pins pointing to the rear of the car.
I did print two of this things, and glued them in place with 5 min epoxy. It is enough to hold the back of the holder in place and insert the springs in the front." https://3dcarparts.org/library/1998/Audi/TT/roof-courtesy-light-holder-locking-pin-repair https://r2-upload.3dcarparts.workers.dev/file/parts/54081879-aa6c-4ba5-b08c-60bcef509495/images/roof-courtesy-light-holder-locking-pin-repair-1_1777969233874_w9ixox.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/roof-courtesy-light-holder-locking-pin-repair?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-20887a74-1a70-460a-a4ca-dca689631ae7 1998 Audi TT Sill Drain Fitting "I created this drain fitting as most of the fittings on my TT where either broken or missing. It is not an exact replica (beyond my skill set) but works/fits well.
No supports needed, 0.1 layer height.
I have only experience in printing in PLA, I believe ABS is better suited to automotive parts due to the effects of heat but as these are fitted to the underside of the car they are unlikely to suffer from high temperatures.
Good luck and I hope you find this useful" https://3dcarparts.org/library/1998/Audi/TT/sill-drain-fitting https://r2-upload.3dcarparts.workers.dev/file/parts/20887a74-1a70-460a-a4ca-dca689631ae7/images/sill-drain-fitting-1_1777969229804_9untf1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Audi/TT/sill-drain-fitting?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-69c56574-aeaf-4d79-98e9-0fc9563563af 1998 Audi TT Radio DIN Filler Blocks To fill up the outer edges of your aftermarket stereo in a Audi TT 8n (Mk1) If correctly printed, they have a snug fit, and will nof fall out :) https://3dcarparts.org/library/1998/Audi/TT/radio-din-filler-blocks https://r2-upload.3dcarparts.workers.dev/file/parts/69c56574-aeaf-4d79-98e9-0fc9563563af/images/radio-din-filler-blocks-1_1777969225538_65alrq.jpg in_stock 15.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/radio-din-filler-blocks?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9428138d-c779-4d2f-bbec-2f4fc55b056a 2001 Audi TT Cigarette Lighter Plug/Blank "Made to replace the missing cigarette lighter in my 2001 Audi TT. Looks better than a gaping hole in the dash.
Two versions are included. One with a 12V label and one without." https://3dcarparts.org/library/2001/Audi/TT/cigarette-lighter-plugblank https://r2-upload.3dcarparts.workers.dev/file/parts/9428138d-c779-4d2f-bbec-2f4fc55b056a/images/cigarette-lighter-plugblank-1_1777969217772_38m92g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/TT/cigarette-lighter-plugblank?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-29e98d4e-7b84-4c82-ba0b-0e2c27c26a73 1998 Audi TT Vent Gauge Pod "Audi TT Vent Gauge Ring
download for free" https://3dcarparts.org/library/1998/Audi/TT/vent-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/29e98d4e-7b84-4c82-ba0b-0e2c27c26a73/images/vent-gauge-pod-1_1777969214300_eusn98.jpg in_stock 13.11 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/vent-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-da3523f6-aac7-4e4e-8d8b-ab0ac341c2f4 1998 Audi TT AC Vent Handle Replacement for your broken AC handles https://3dcarparts.org/library/1998/Audi/TT/ac-vent-handle https://r2-upload.3dcarparts.workers.dev/file/parts/da3523f6-aac7-4e4e-8d8b-ab0ac341c2f4/images/ac-vent-handle-1_1777969206646_ptf5tz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/ac-vent-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cab7a5cf-4d1a-495a-8740-2e44dd01c039 1999 Audi TT Vacuum Line Retaining Clip Retaining clip for vacuum line on the Audi TT 8N with AJQ engine (year 1999). https://3dcarparts.org/library/1999/Audi/TT/vacuum-line-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/cab7a5cf-4d1a-495a-8740-2e44dd01c039/images/vacuum-line-retaining-clip-1_1777969202786_afqbbf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1999/Audi/TT/vacuum-line-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-42adb089-d97e-497e-a826-c0b27b2c323e 2014 Audi TT Side Skirt Rocker Panel Bracket This is a remake of a mounting bracket / clip from a 2016 Audi TT RS 8S MK3 side skirt / rocker panel (second & third bracket, counting from the rear wheel). Fits Audi TT MK3 8S 2014 until now. Part of the rocker panel molding mount hardware kit, part number 8S0898909. Tends to break when removing the side skirt / rocker panel but cannot be bought separately. https://3dcarparts.org/library/2014/Audi/TT/side-skirt-rocker-panel-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/42adb089-d97e-497e-a826-c0b27b2c323e/images/side-skirt-rocker-panel-bracket-1_1777969196988_ej7o8q.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2014/Audi/TT/side-skirt-rocker-panel-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-af897ee2-2f78-4ce0-93a9-be1ff8e3b053 1998 Audi TT Door Panel Reinforcement "Door panel tends to break where the rubber is plugged in. This part replaces the broken plastic. Use ASA or minimum PTEG because PLA is too brittle.
https://youtu.be/uEUMZRhjPyM" https://3dcarparts.org/library/1998/Audi/TT/door-panel-reinforcement https://r2-upload.3dcarparts.workers.dev/file/parts/af897ee2-2f78-4ce0-93a9-be1ff8e3b053/images/door-panel-reinforcement-1_1777969189415_ij4izy.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/door-panel-reinforcement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3e0d4234-e151-4c75-b928-9da31bb9ccd7 2006 Audi TT Glovebox CD Changer Replacement Cubby "a replacement for the cd changer in the glovebox of the mk2 8J Audi TT.
i printed it vertically with the opening at the top so it didn't need any supports,i did it at a 10% infill and seems to be plenty sturdy. it's a perfect slip fit, once flocked will match perfectly. can be used as a base to design your own custom cubby.would love to see what others do with it." https://3dcarparts.org/library/2006/Audi/TT/glovebox-cd-changer-replacement-cubby https://r2-upload.3dcarparts.workers.dev/file/parts/3e0d4234-e151-4c75-b928-9da31bb9ccd7/images/glovebox-cd-changer-replacement-cubby-1_1777969185779_knjkk3.jpg in_stock 29.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Audi/TT/glovebox-cd-changer-replacement-cubby?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb8b0ae3-d9fb-41ba-9dbd-b092b13d55da 2002 Audi TT Navigation System Knob I got tired of the stock nav knob breaking in my TT, so I made one. https://3dcarparts.org/library/2002/Audi/TT/navigation-system-knob https://r2-upload.3dcarparts.workers.dev/file/parts/bb8b0ae3-d9fb-41ba-9dbd-b092b13d55da/images/navigation-system-knob-1_1777969182178_b9xtbo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Audi/TT/navigation-system-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ed50cb68-1ad1-4309-b5fe-68ff1100fd4f 2006 Audi TT Centre Console Cover Have an old 8J TT with the phone adapter kit in the centre console. As I don't use this I modeled a cover. The picture in the actual car is a prototype to verify fit so ignore the finish :-) https://3dcarparts.org/library/2006/Audi/TT/centre-console-cover https://r2-upload.3dcarparts.workers.dev/file/parts/ed50cb68-1ad1-4309-b5fe-68ff1100fd4f/images/centre-console-cover-1_1777969166961_6ytv57.jpg in_stock 25.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Audi/TT/centre-console-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ae73ed76-bf38-4cc4-90ef-2421143078ea 2006 Audi TT Tail Light Bolt Support "This is the plastic part that supports an M6x1 bolt used to hold the tail light into an Audi TT Mk2.
They go for $35 USD, so printing it and using a $1 bolt seemed more logical" https://3dcarparts.org/library/2006/Audi/TT/tail-light-bolt-support https://r2-upload.3dcarparts.workers.dev/file/parts/ae73ed76-bf38-4cc4-90ef-2421143078ea/images/tail-light-bolt-support-1_1777969160102_epvwnc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Audi/TT/tail-light-bolt-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b490516f-416d-4e65-9a7e-7a36efb548b9 1998 Audi TT Roof Light Holder Repair Clip "The transparent part in the roof light in my Audi TT didn't stay in place. The little ""nails"" at the tip of the ""fingers"" were broken, as in the photos.
The part I designed and printed installs over the fingers to replace the nails which bite the spring to stay in place.
You must print two copies, one for each finger. I keep them in place by simple pressure, but they can be glued with cyanoacrylate." https://3dcarparts.org/library/1998/Audi/TT/roof-light-holder-repair-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b490516f-416d-4e65-9a7e-7a36efb548b9/images/roof-light-holder-repair-clip-1_1777968965675_huzmfs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/roof-light-holder-repair-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0617854b-2169-4caa-8b71-cf4dc0793e52 1998 Audi TT Sill Drain Insert "I decided to have a go at printing this item as most on my 2004 TT were either missing or broken. It is not quite exactly the same as OEM but it fits well and appears to do the job.
Ideally, it should be printed in ABS but, due to it's fitment location, in PLA mine seem to be fine.
I'm new to 3D design and 3D printing so I'm sure some of you would find improvements to my design and feel free to tinker." https://3dcarparts.org/library/1998/Audi/TT/sill-drain-insert https://r2-upload.3dcarparts.workers.dev/file/parts/0617854b-2169-4caa-8b71-cf4dc0793e52/images/sill-drain-insert-1_1777968962145_k6lmy5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Audi/TT/sill-drain-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8095d4fa-69c8-496a-abf5-8574e4b5e873 1994 Audi A6 Clip This is a replacement part for the Audi A6 C4. It is installed behind the rubber strip on the rear door. https://3dcarparts.org/library/1994/Audi/A6/clip https://r2-upload.3dcarparts.workers.dev/file/parts/8095d4fa-69c8-496a-abf5-8574e4b5e873/images/clip-1_1777968958595_eiycuj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1994/Audi/A6/clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7d497f03-d934-40e8-b41c-63303c14ffda 1999 Audi TT Center Console Panel (Bass Knob / Voltmeter / USB) "Created by the NEED a Bass knob, voltage and USB in a neat little package for your aftermarket system. Fits perfectly in that little center rectangle. Uses parts off Amazon/Ebay. USB extension (ears trimmed to fit), Standard digital volt meter. notched for the USB and bass knob (case removed and a 25mm aluminum knob used).
Change filament color to add a dynamic effect of the knob and controls.
Created by me. Enjoy!" https://3dcarparts.org/library/1999/Audi/TT/center-console-panel-bass-knob-voltmeter-usb https://r2-upload.3dcarparts.workers.dev/file/parts/7d497f03-d934-40e8-b41c-63303c14ffda/images/center-console-panel-bass-knob-voltmeter-usb-1_1777968954725_eb3ze3.jpg in_stock 13.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Audi/TT/center-console-panel-bass-knob-voltmeter-usb?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb0e96af-d010-469d-a99c-edf28d090ea7 1990 Audi 100 Sunroof Trim Panel Clip Reinforcement "Does your C4 chassis Audi have broken clips on the sunroof trim panel? Of course it does. Before you jerry rig something gross with JB weld and tin cans consider printing these replacement clips. Simply slip them over the lip and glue in place. You can even install them before the clips break off! With this easy mod you will never have the sunroof controls fall and hit you in the face again (except for when the front clips inevitably break off too).
Fits C4 chassis Audi's: '90-'94 100, '92-'94 S4, '95-'97 S6, '94-'97' A6 and anything else that shares the same sunroof control panel." https://3dcarparts.org/library/1990/Audi/100/sunroof-trim-panel-clip-reinforcement https://r2-upload.3dcarparts.workers.dev/file/parts/bb0e96af-d010-469d-a99c-edf28d090ea7/images/sunroof-trim-panel-clip-reinforcement-1_1777968950580_j9iqnf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Audi/100/sunroof-trim-panel-clip-reinforcement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9a82badf-0f2a-4a16-93c8-c55896119e56 1998 Audi TT Vent Blanking Plate "Blanking bung to allow you to prevent air coming out of the vent when installing a boost gauge.
Wrap some foam tape around the perimeter of the section that slots into the vent channel to seal it and tape in place with duct tape." https://3dcarparts.org/library/1998/Audi/TT/vent-blanking-plate https://r2-upload.3dcarparts.workers.dev/file/parts/9a82badf-0f2a-4a16-93c8-c55896119e56/images/vent-blanking-plate-1_1777968946619_umg5yg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/vent-blanking-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f566c093-6c3b-4861-9c1c-c491cc22ee05 2005 Audi A4 Air Vent Gear Printed with PETG, 0.2mm layer. FreeCAD file included. https://3dcarparts.org/library/2005/Audi/A4/air-vent-gear https://r2-upload.3dcarparts.workers.dev/file/parts/f566c093-6c3b-4861-9c1c-c491cc22ee05/images/air-vent-gear-1_1777968565069_v7hn8s.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Audi/A4/air-vent-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-47c1455f-f8d3-4db6-bb60-efb8f60cd77a 2001 Audi A4 Glove Box Hinge "Known problem on the Audi A4 B6, the glove box hinge breaks.
This part can fix it.
Remove the glove box lid and sand the hinge on the lid flat.
Drill a hole with an 11-12mm drill bit (if necessary, widen it a little with a Dremel).
Glue in with sufficient two-component adhesive." https://3dcarparts.org/library/2001/Audi/A4/glove-box-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/47c1455f-f8d3-4db6-bb60-efb8f60cd77a/images/glove-box-hinge-1_1777968561949_kna8wb.jpg in_stock 13.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/A4/glove-box-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-470b9ab7-70bf-43ec-8751-710641b70747 2008 Audi A4 Dash Speaker Grille "work in progress
Audi dash speaker grill incorp. 3inch focal flax midrange
best to print on side so support works better
need to watch for delamination
best to print in ABS or petg for heat resistance
reverse/mirror sti for other side
this item will need post prep (sanding, filler and paint)
dash internals may need modifying to fit speaker
before you prep after test fit ... use heat to put a slight bend on the back edge of the print so it slips down parallel to the screen." https://3dcarparts.org/library/2008/Audi/A4/dash-speaker-grille https://r2-upload.3dcarparts.workers.dev/file/parts/470b9ab7-70bf-43ec-8751-710641b70747/images/dash-speaker-grille-1_1777968557670_ofizxz.jpg in_stock 11.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Audi/A4/dash-speaker-grille?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5da65a0f-3dfa-442a-a9c8-0f8709dffa59 2002 Audi A4 Interior Dome Light LED Retrofit Holder LED holding blocks for Audi interior lights (A4 2002) may be can fit in ( A3). https://3dcarparts.org/library/2002/Audi/A4/interior-dome-light-led-retrofit-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5da65a0f-3dfa-442a-a9c8-0f8709dffa59/images/interior-dome-light-led-retrofit-holder-1_1777968550322_yuak11.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2002/Audi/A4/interior-dome-light-led-retrofit-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2447987-d714-4f92-ba0c-68001d03a5f8 1994 Audi A4 Center Console Cubby "*Update - I ran into an issue with the installation in my car. The built in support on the center console, specifically the side with the holes for the tabs to slide into, gave out on me. I assume this is due to too much weight in the cubby, and rough roads. I haven't had a chance to take a good look at a permanent fix, and may not for a while. In the meantime I suggest padding the bottom of the cubby with foam or something similar to help support it from underneath before installing.
Original:
Just a warning that I am new to modeling, if anyone has any tips on improving this model please let me know!
This part replaces the popup cupholders in the center console of B5 chassis Audi A4s. May also work in B5 chassis VW Passats, but I have no means of testing to confirm. I personally hate the popup cupholders as they have no support on two sides, which means hot coffee in your lap if you take a corner a little too fast. I swapped the cubby further back to cupholders so needed a better solution for the now useless space, and this was my solution.
Modeled in Blender and sliced in Cura(Cura says there are problems with the model when I load it up but it still slices and prints just fine) I used the generated tree supports touching buildplate with a very high overhang angle(I think 80-85 degrees) so that it only supports the parts near the top that come out at a 90 degree angle.
I intend to print in ABS and will update with successful print settings." https://3dcarparts.org/library/1994/Audi/A4/center-console-cubby https://r2-upload.3dcarparts.workers.dev/file/parts/b2447987-d714-4f92-ba0c-68001d03a5f8/images/center-console-cubby-1_1777968546537_641hbu.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A4/center-console-cubby?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6d14babd-10fd-4e53-817b-b995940e226d 2016 Audi A4 TPMS Module Holder Bracket "This is a support bracket for the Audi TPMS module, 8S0 907 273.
Suitable for Audi A4/S4/RS4 B9 models, and may well fit A5/S5/RS5 as well. This holds the module securly by the rear right wheel. The OEM fitting location is under the car, but this works just as well, and is neater and easier, whilst protecting the module and wiring.
Printing:
Prusa Mini+
Supports = Yes
Infill = 30%
Setting = 0.20mm Quality
Material = PETG
Additional = 2 small self tapping screws to hold module onto the bracket." https://3dcarparts.org/library/2016/Audi/A4/tpms-module-holder-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/6d14babd-10fd-4e53-817b-b995940e226d/images/tpms-module-holder-bracket-1_1777968275713_t4mv4l.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2016/Audi/A4/tpms-module-holder-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9aaa4bb0-3bfd-4a14-a185-e632856e5626 2002 Audi A4 Vent Gauge Mount This mount will allow you to install a 52mm gauge in the far left vent in a Audi B6 A4 and other Audi's that use the same vent size. https://3dcarparts.org/library/2002/Audi/A4/vent-gauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/9aaa4bb0-3bfd-4a14-a185-e632856e5626/images/vent-gauge-mount-1_1777968270853_v2g8ql.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Audi/A4/vent-gauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0373e2cc-af60-47b4-8cde-fee56fcd491b 1995 Audi A4 Cargo Cover Hook These were designed for my car, but maybe it will fit yours. This part goes deep into the screw hole, replacing a mounting peace of plastic that in my case was also broken. You can choose either left or right they are different lengths, you can print a mirror part to convert one side to the other. There is also a Fusion 360 project if you want to modify it further. https://3dcarparts.org/library/1995/Audi/A4/cargo-cover-hook https://r2-upload.3dcarparts.workers.dev/file/parts/0373e2cc-af60-47b4-8cde-fee56fcd491b/images/cargo-cover-hook-1_1777968265747_o01u6d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/Audi/A4/cargo-cover-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f2395341-5a2b-4817-aec1-ddceba70a37e 1994 Audi A4 Car Radio Plug Frame "The car is installed with effort
Printing speed 40mm/sec" https://3dcarparts.org/library/1994/Audi/A4/car-radio-plug-frame https://r2-upload.3dcarparts.workers.dev/file/parts/f2395341-5a2b-4817-aec1-ddceba70a37e/images/car-radio-plug-frame-1_1777968262309_ww5oz3.jpg in_stock 8.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A4/car-radio-plug-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-10f05ead-da52-4059-8d80-b83428a7a72e 1972 Audi 80 Sun Visor Holder Clip Audi 80 B1 sun visor holder/clip https://3dcarparts.org/library/1972/Audi/80/sun-visor-holder-clip https://r2-upload.3dcarparts.workers.dev/file/parts/10f05ead-da52-4059-8d80-b83428a7a72e/images/sun-visor-holder-clip-1_1777968256603_3klgw9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1972/Audi/80/sun-visor-holder-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9ced6425-94f8-47ac-9b8a-4680f762d404 2008 Audi A4/S4/RS4 Dash Speaker Adapter "Audi A4/S4/RS4 B8 platform dash speaker adapters - suited for 75mm speakers. This is for the side of the dashboard, checkout the other STL file for the Centre adapter.
Side required x2
Centre required x1
Works with both PLA and PETG" https://3dcarparts.org/library/2008/Audi/A4%2FS4%2FRS4/dash-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/9ced6425-94f8-47ac-9b8a-4680f762d404/images/dash-speaker-adapter-1_1777968251850_r7o6yy.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Audi/A4%2FS4%2FRS4/dash-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-85f8112a-56cc-48de-a800-e84d019c3b11 2001 Audi A4 Headlight Back Cover "Part number - 8E0941159
Infill 30%
Support required
I am using Cura slicer.
Print time aprox 5 hours - depending on your settings
If you need to make right side headlight cover just mirror this in slicer and you are good to go...
https://www.youtube.com/watch?v=YmY3W9GISco
Will see how it goes for longer than a month - if effected by heat I will try to print in ABS or PET-G. Haven't tried these materials yet..." https://3dcarparts.org/library/2001/Audi/A4/headlight-back-cover https://r2-upload.3dcarparts.workers.dev/file/parts/85f8112a-56cc-48de-a800-e84d019c3b11/images/headlight-back-cover-1_1777968247008_zrsv0a.jpg in_stock 20.40 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2001/Audi/A4/headlight-back-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f0576a7c-ed72-46a4-ab1f-11fe5b3115a0 2008 Audi A4 Fender Stone Chip Guard "Audi a4/rs4/allroad b8 fender stone guard
8K0 853 823 A
8K0 853 824 A" https://3dcarparts.org/library/2008/Audi/A4/fender-stone-chip-guard https://r2-upload.3dcarparts.workers.dev/file/parts/f0576a7c-ed72-46a4-ab1f-11fe5b3115a0/images/fender-stone-chip-guard-1_1777968243283_mbi2ob.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Audi/A4/fender-stone-chip-guard?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ed3ebe1b-2438-4f34-abd3-461ba774b605 1979 Audi 200 Sun Visor Clip This is a replacment clip for Audi 200 typ43 https://3dcarparts.org/library/1979/Audi/200/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ed3ebe1b-2438-4f34-abd3-461ba774b605/images/sun-visor-clip-1_1777968237004_zx37h2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Audi/200/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-703e4a40-da2f-47ed-9177-dc0dca8dc2a2 2003 Audi A3 Sun Visor Clip "My driver's side sun visor clip broke, so I created this file based on the other clip. This design is commonly used in many Audi models, so it may be compatible with yours. I printed mine on its side for added clip strength using PETG with tree supports. The initial fit was a bit snug, but it loosened over time and now feels similar to the original part. Don't forget to transfer the metal spring from the broken part to the new one.
UPDATE: The PETG is not good material for the application of the clip. In the summer heat it loosened a lot and even started to wobble." https://3dcarparts.org/library/2003/Audi/A3/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/703e4a40-da2f-47ed-9177-dc0dca8dc2a2/images/sun-visor-clip-1_1777968035631_h3dpfg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Audi/A3/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-faf3c2c2-272f-4b05-a58f-097e283902fb 2008 Audi A4 Microphone Mount "English version:
This microphone mount was designed in order to integrate the microphone capsule from the RSNAV headunit inside the roof of an Audi A4/S4/RS4 B8, using the space originally made for RHD cars. With this custom mount, the capsule aims at the left side of the cabin, as opposed to the original part for RHD cars. This part might fit in other Audi cars, but it's to be confirmed! Please print in a temperature resistant filament like ABS, since this part is right under the car roof, it might get pretty toasty during summer." https://3dcarparts.org/library/2008/Audi/A4/microphone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/faf3c2c2-272f-4b05-a58f-097e283902fb/images/microphone-mount-1_1777968030848_f1hl3y.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Audi/A4/microphone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a711ded2-8629-419a-9523-2fd56fc6b4fe 2001 Audi A4 Avant Warning Triangle Cover Clip This clip is designed to replace a broken one from an Audi A4 Avant B6 model (my vehicle, may fit others), warning triangle flap on the boot lid. There are a few designs for the inner lug that breaks on Thingiverse but I didn't find this part which I was in need of. Hopefully this creation will help others too. https://3dcarparts.org/library/2001/Audi/A4%20Avant/warning-triangle-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/a711ded2-8629-419a-9523-2fd56fc6b4fe/images/warning-triangle-cover-clip-1_1777968027029_9ioeje.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/A4%20Avant/warning-triangle-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-823d8bef-3c10-40cf-be6b-ddb0d76a89b5 2002 Audi A4 Side Skirt Clip For attaching the side skirt. The clip is no longer available from Audi and cannot be found elsewhere on the internet either. https://3dcarparts.org/library/2002/Audi/A4/side-skirt-clip https://r2-upload.3dcarparts.workers.dev/file/parts/823d8bef-3c10-40cf-be6b-ddb0d76a89b5/images/side-skirt-clip-1_1777968022336_gtj7jv.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Audi/A4/side-skirt-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-526c4c6c-69a8-4ca1-ae7a-5c6ed2ae9440 1991 Audi 200 Door Mechanism Retention Clip "443 839 821 (443839821) - door mechanism retention clip that is no longer available from Audi.
This clip is used in multiple areas in the door open mechanism on the 1991 Audi 200 20v - and probably a lot of similar vintage Audis.
These secure the metal linkage of the exterior door handle to the door lock. On my car, we had a string of cold weather and both exterior front doors open mechanisms broke in the same way on the same day. I was able to get them back in action using these printed clips in PETG." https://3dcarparts.org/library/1991/Audi/200/door-mechanism-retention-clip https://r2-upload.3dcarparts.workers.dev/file/parts/526c4c6c-69a8-4ca1-ae7a-5c6ed2ae9440/images/door-mechanism-retention-clip-1_1777968018930_k57rxy.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1991/Audi/200/door-mechanism-retention-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ace10146-54e3-484d-9bce-29eb8e8c3520 1994 Audi A6 Vent Grille Retainer Clip "Retainer clip for the vent grille (holds the rotating knob).
Additionally, a self-tapping screw with a press washer M2 is required." https://3dcarparts.org/library/1994/Audi/A6/vent-grille-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ace10146-54e3-484d-9bce-29eb8e8c3520/images/vent-grille-retainer-clip-1_1777968015788_6en7rn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A6/vent-grille-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-74a84183-d9f4-432c-ac5e-86f34e7e8999 1998 Audi TT Phone GPS Mount "Mount for the Audi TT 1st generation, attaches behind the 2 dashboard air vents, and allows mounting any type of phone or GPS holder in the center.
Infill at least 80% to have enough material in the mount for screwing. ABS for good long-term hold (PLA will soften at the first signs of heat)" https://3dcarparts.org/library/1998/Audi/TT/phone-gps-mount https://r2-upload.3dcarparts.workers.dev/file/parts/74a84183-d9f4-432c-ac5e-86f34e7e8999/images/phone-gps-mount-1_1777968010445_34eteo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/phone-gps-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-71ae70ec-afe5-40f6-ae99-b1ff7a92f5bc 1998 Audi TT Rear Seat Flap Door Latch "Audi TT MK1 - fix for the rear seat door flap.
Just print these and assemble with a spring from a ball point pen.
Put them in place to check fit and function (will work with existing L shaped feature, other features may need to be trimmed or removed.
Once fit and function is checked, apply glue to the housing flanges and clamp in place to cure.
Miklos Kovach
2001 Audi TT MK1
2003 Audi TT MK1
2013 A3 TDI
2013 Q7 TDI
Priors : allroad,allroad, A6,A4," https://3dcarparts.org/library/1998/Audi/TT/rear-seat-flap-door-latch https://r2-upload.3dcarparts.workers.dev/file/parts/71ae70ec-afe5-40f6-ae99-b1ff7a92f5bc/images/rear-seat-flap-door-latch-1_1777968005790_qf410v.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Audi/TT/rear-seat-flap-door-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e2dad92a-5de6-485d-8cc8-e17b3b489382 1999 Audi TT USB Bracket "The early Audi TT's (1999-2001~ish) had a mobile phone option that included a phone jack in the center console.
I made this bracket to install a USB port in place of that original phone jack. This bracket engages the push-tabs on a push-in style USB port and holds them firmly in place. It attaches with the original screws.
I'm sure there are only three other people in the entire world who might want this but for them, here it is." https://3dcarparts.org/library/1999/Audi/TT/usb-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e2dad92a-5de6-485d-8cc8-e17b3b489382/images/usb-bracket-1_1777968002351_qxd4hf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Audi/TT/usb-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-172b7351-ff3e-45c6-ac61-c2766a5ace82 2006 Audi TT Dashboard Vent Phone Mount audi tt mk2 phone support between the front fans https://3dcarparts.org/library/2006/Audi/TT/dashboard-vent-phone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/172b7351-ff3e-45c6-ac61-c2766a5ace82/images/dashboard-vent-phone-mount-1_1777967993427_gv2yhh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Audi/TT/dashboard-vent-phone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-60993f0b-d7db-4af1-9c66-9e0748f6f9b2 2005 Audi A4 Tailgate Turning Lock This is a spare part for an Audi A4 built around the year 2005. It is part of a turning lock on the inside of the tailgate. It may not fit newer versions of this car. https://3dcarparts.org/library/2005/Audi/A4/tailgate-turning-lock https://r2-upload.3dcarparts.workers.dev/file/parts/60993f0b-d7db-4af1-9c66-9e0748f6f9b2/images/tailgate-turning-lock-1_1777967554279_jn24lq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Audi/A4/tailgate-turning-lock?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ded8add8-850e-476a-adcd-89d39fb76b8d 2002 Audi A4 / S4 Center Vent Clip Mount "A base clip for the center vent and dash trim for an Audi b6 / b7 in the style of a Proclip mount.
I mounted it to the very center to have the least bending on the vent frame (plus the center section is much stiffer and holds better) and made a phone mount to screw into it for my Galaxy S9 with a case and a wireless charger base, but you can attach anything to it.
Sits very solid and hasn't fallen with any sort of spirited driving yet.
Printed in PETG, don't print in PLA due to interior car temps.
*updated to v2 with a slightly bigger top clip for more stability" https://3dcarparts.org/library/2002/Audi/A4%20%2F%20S4/center-vent-clip-mount https://r2-upload.3dcarparts.workers.dev/file/parts/ded8add8-850e-476a-adcd-89d39fb76b8d/images/center-vent-clip-mount-1_1777967316919_474x7c.jpg in_stock 12.12 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Audi/A4%20%2F%20S4/center-vent-clip-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ae3916cd-1557-407f-902e-da1756ae7764 2001 Audi A4 Back Seat Fold Down Latch Lever "Well known Audi A4 B6 issue with breakable back seat fold down lever.
Fits and works perfectly!
Also noted by [@drewshipley](https://www.thingiverse.com/drewshipley) it fits A4/S4 B5 Avant." https://3dcarparts.org/library/2001/Audi/A4/back-seat-fold-down-latch-lever https://r2-upload.3dcarparts.workers.dev/file/parts/ae3916cd-1557-407f-902e-da1756ae7764/images/back-seat-fold-down-latch-lever-1_1777967311989_sd3nt6.jpg in_stock 8.71 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/A4/back-seat-fold-down-latch-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-af3c3174-2132-44c4-93fe-6ccffa9f2107 1994 Audi A4 USB/AUX Holder "Audi A4 B5 USB/AUX Holder for center console
adapter-plate to install a USB/Aux mount cable found on Amazon:
https://www.amazon.com/USB-Mount-Cable-Extention-Motorcycle/dp/B00S6IO0NG/" https://3dcarparts.org/library/1994/Audi/A4/usbaux-holder https://r2-upload.3dcarparts.workers.dev/file/parts/af3c3174-2132-44c4-93fe-6ccffa9f2107/images/usbaux-holder-1_1777967307970_oarmqi.jpg in_stock 14.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A4/usbaux-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ff38f96a-74cb-4caf-ab3c-459ebee6c284 2005 Audi A4/S4 Card Tray Insert "Cards are difficult to retrieve out of the storage tray - modeled this insert to help.
I printed on edge, with just a little support in the back for the little offset." https://3dcarparts.org/library/2005/Audi/A4%2FS4/card-tray-insert https://r2-upload.3dcarparts.workers.dev/file/parts/ff38f96a-74cb-4caf-ab3c-459ebee6c284/images/card-tray-insert-1_1777967304739_vkncsv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Audi/A4%2FS4/card-tray-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c22d0b6-d884-4464-91ad-4bf36b36a148 2006 Audi A4 Glove Box Hinges Left and Right Hinges to retrofit the Audi A4 Glove box. https://3dcarparts.org/library/2006/Audi/A4/glove-box-hinges https://r2-upload.3dcarparts.workers.dev/file/parts/2c22d0b6-d884-4464-91ad-4bf36b36a148/images/glove-box-hinges-1_1777967300231_6xtg93.jpg in_stock 11.61 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Audi/A4/glove-box-hinges?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-33f3eaf6-4fbe-43bd-9265-cac57d8a1487 1995 Audi A4 Radio Cover Works great! https://3dcarparts.org/library/1995/Audi/A4/radio-cover https://r2-upload.3dcarparts.workers.dev/file/parts/33f3eaf6-4fbe-43bd-9265-cac57d8a1487/images/radio-cover-1_1777967296890_0rm27u.jpg in_stock 17.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/Audi/A4/radio-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6dcd0d5a-74db-4a00-8987-0a1ec60fac69 2008 Audi A4 Rear Seat Cup Holder "My A4 isn't born with cupholders in the armrest for the rear seats, so it made this one to suit my needs.
Remixed to fit my A4 B8, will also fit A5 B8, maybe more.
This is a remix of the remix by lzrdwrzd, which in turn is based on the original model by avfor (thing:6950258).
All credit for the original design goes to avfor." https://3dcarparts.org/library/2008/Audi/A4/rear-seat-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/6dcd0d5a-74db-4a00-8987-0a1ec60fac69/images/rear-seat-cup-holder-1_1777967290153_2ws950.jpg in_stock 29.51 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Audi/A4/rear-seat-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-549ec591-72c2-41ee-bfac-f2437c10388a 2008 Audi A4 Speaker Adapter 165mm "Audi A4 B8 Speaker Adapter 165mm
Front (the bigger one)
And rear (the smaller)
Printed without support.
Hope i could help u out...should fit for the most 165mm Speakers. I desinged it for jbl stage 3 speakers." https://3dcarparts.org/library/2008/Audi/A4/speaker-adapter-165mm https://r2-upload.3dcarparts.workers.dev/file/parts/549ec591-72c2-41ee-bfac-f2437c10388a/images/speaker-adapter-165mm-1_1777967281359_s0rphh.jpg in_stock 22.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Audi/A4/speaker-adapter-165mm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b31ce31f-d714-442c-bb56-39aae8f88d8d 1994 Audi A4 Fender Screw Insert / Plastic Nut Just my design of a audi a4 b5 fender screw insert....for mor durability is recomended to print in ABS leair hight 1.5 and befour mounting rapid soke (3..5sec) in acetone. https://3dcarparts.org/library/1994/Audi/A4/fender-screw-insert-plastic-nut https://r2-upload.3dcarparts.workers.dev/file/parts/b31ce31f-d714-442c-bb56-39aae8f88d8d/images/fender-screw-insert-plastic-nut-1_1777967061412_9n89yg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1994/Audi/A4/fender-screw-insert-plastic-nut?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ee9ea213-d3c0-45d7-8b7b-9e9516f98776 2001 Audi A4 Headlight Projector Bracket "A common issue with the projectors in OEM Valeo Bixenon housings fitted to B6 A4's is that the reflector bowl can become scorched which results in diminished light output. Instead of replacing the whole headlight housing, only to have the issue reoccur, one can use this bracket to replace the projector itself with Koito Q5-r Replica projectors or similar [D1S bixenon projectors](https://www.theretrofitsource.com/bi-xenon-acme-standard-d1s-d3s-51789.html). This also allows you to retain the original ballast and bulb type (D1S) as well, to help keep cost down.
This modification is outlined in this [Audizine thread](https://www.audizine.com/forum/showthread.php/771939-B6-Bi-xenon-headlights-Valeo-Projector-Swap-DYI ""Audizine"")
The credit for the original bracket goes to the OP of the thread who posted the DWG file. I simply modeled the mounting holes for the projector that were missing and created the STL so that it could be 3D printed.
Avoid using PLA material for this bracket, as the inside of the headlight housing can get fairly hot and any warping of the part will cause issues with beam alignment. I decided to use a Carbon Fiber Nylon material for good stiffness and dimensional stability as well as heat resistance. Although other materials may perform okay, YMMV." https://3dcarparts.org/library/2001/Audi/A4/headlight-projector-bracket https://3dcarparts.org/og-image-library.png in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2001/Audi/A4/headlight-projector-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-60775bb5-47cd-4daa-b4ee-db5c228f862a 2003 Audi A4 Warning Triangle Hatch Latch "Latch for the warning triangle hatch in the trunk of the Audi A4.
Print in ABS as heat warps PLA.
This is a hatch latch for Audi (hatch of the warning Triangle)
My Audi is an A4 quattro (2003).
ABS only.
Ced Ced" https://3dcarparts.org/library/2003/Audi/A4/warning-triangle-hatch-latch https://r2-upload.3dcarparts.workers.dev/file/parts/60775bb5-47cd-4daa-b4ee-db5c228f862a/images/warning-triangle-hatch-latch-1_1777967055333_8nn547.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Audi/A4/warning-triangle-hatch-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-87e74716-8927-471c-bbfc-08b0d9cd3c1e 1996 Audi A4 Rear Door Speaker Adapter "This is a Audi A4 B5 Avant only rear door speaker adapter. This allows you to replace the stock door speaker with a 6.5"" speaker. This will allow you to adapt a standard speaker to the factory 3 hole mount." https://3dcarparts.org/library/1996/Audi/A4/rear-door-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/87e74716-8927-471c-bbfc-08b0d9cd3c1e/images/rear-door-speaker-adapter-1_1777967051566_g39ula.jpg in_stock 16.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Audi/A4/rear-door-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7243628a-8f54-41a3-93ad-d63516e45b34 1997 Audi A6 Front Window Regulator Clip Enhanced window clip for Audi A6 C5 (including V8 models). https://3dcarparts.org/library/1997/Audi/A6/front-window-regulator-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7243628a-8f54-41a3-93ad-d63516e45b34/images/front-window-regulator-clip-1_1777967047994_xz6wix.jpg in_stock 9.47 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Audi/A6/front-window-regulator-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6af7c56c-a2bd-4278-9dc2-ed8a3f01269b 1994 Audi A4 Front Speaker Adapter Bracket "This bracket is designed to adapt a 5.25"" Speaker to fit the factory mounting locations on the front door cards on the B5 Audi A4. The design was derived in part from the excellent ""Audi B5 S4 Front Speaker Bracket / Adapter"" by @fergusykes.
The factory speakers are mirrored from each other, therefore you will need to ""mirror"" one of your prints so you have both a ""left"" and ""right"" bracket.
#### Bill of Materials (each)
- 4x M3 Threaded Insert (EX: Ruth RX-M3x5.7)
- 4x M3 Button Head Screws
- 3x OEM mounting screws
- 5.25"" / 130mm speaker (EX: Hertz K 130 Uno Series 5-1/4"" component speakers)
#### Printing Recommendations
- Remember to mirror one of the brackets
- ABS, ASA or a similar temperature resistant filament for bracket
- Use TPU or similar flexible filament for seal (fits in bracket groove)
- Designed to be printed with ""zero distance"" supports in an appropriate removable material such as HIPS
- Strength Recommendations:
- Wall Loops: 5
- Infill: 30% Cubic" https://3dcarparts.org/library/1994/Audi/A4/front-speaker-adapter-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/6af7c56c-a2bd-4278-9dc2-ed8a3f01269b/images/front-speaker-adapter-bracket-1_1777967042654_yckm3a.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A4/front-speaker-adapter-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-41dd99ff-6f14-41b3-bcda-297b1f8a8a76 2005 Volkswagen Passat Tail Light Clip "Passat Variant B6/3C tail light clip replacement
Should be glued into the hole of the spring. Minor adjustment might be necessary depending how the original clip broke.
I used 50% infil, ABS." https://3dcarparts.org/library/2005/Volkswagen/Passat/tail-light-clip https://r2-upload.3dcarparts.workers.dev/file/parts/41dd99ff-6f14-41b3-bcda-297b1f8a8a76/images/tail-light-clip-1_1777966666838_2mcl14.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2005/Volkswagen/Passat/tail-light-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c297263-09d8-4652-bb12-bf119e4fb1e9 2005 Volkswagen Passat Rear Windshield Wiper Hinge Cover "VW Passat rear window wiper hinge
Cover that goes on top of the hinge, attaches only from one side not from 3 as in the original. So its possible to loose the cover.
Edit in tinkercad:
https://www.tinkercad.com/things/8qmGG0tnUcn" https://3dcarparts.org/library/2005/Volkswagen/Passat/rear-windshield-wiper-hinge-cover https://r2-upload.3dcarparts.workers.dev/file/parts/2c297263-09d8-4652-bb12-bf119e4fb1e9/images/rear-windshield-wiper-hinge-cover-1_1777966661955_6lpgrx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Volkswagen/Passat/rear-windshield-wiper-hinge-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a989f0c2-579d-47eb-8e8c-c3875ef01259 2001 Volkswagen Passat Front Jacking Point Cover Print in the vertical orientation to allow clips to flex. I also added a fuzzy skin to the outer face in the slicer software to match the texture of the plastic sills, https://3dcarparts.org/library/2001/Volkswagen/Passat/front-jacking-point-cover https://r2-upload.3dcarparts.workers.dev/file/parts/a989f0c2-579d-47eb-8e8c-c3875ef01259/images/front-jacking-point-cover-1_1777966657080_34smfm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Volkswagen/Passat/front-jacking-point-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6a15d8da-93cf-434e-95b3-5f3c6d0d4277 2006 Volkswagen Passat Trunk Curtain Holder "VW Passat 2006 wagon trunk curtain holder (right). Invert Y axis for left holder.
Element is design with a very tight fit." https://3dcarparts.org/library/2006/Volkswagen/Passat/trunk-curtain-holder https://r2-upload.3dcarparts.workers.dev/file/parts/6a15d8da-93cf-434e-95b3-5f3c6d0d4277/images/trunk-curtain-holder-1_1777966652829_34m8xr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Volkswagen/Passat/trunk-curtain-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-15117c4a-5938-4a2b-a2a5-c0bf1bfea67d 2001 Volkswagen Passat Rear Ashtray Repair Kit https://www.drive2.ru/l/562215205849793442/ https://3dcarparts.org/library/2001/Volkswagen/Passat/rear-ashtray-repair-kit https://r2-upload.3dcarparts.workers.dev/file/parts/15117c4a-5938-4a2b-a2a5-c0bf1bfea67d/images/rear-ashtray-repair-kit-1_1777966648745_hzp72k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Volkswagen/Passat/rear-ashtray-repair-kit?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf01a8ab-b151-48c9-a95c-06226ea5c0ae 1996 Volkswagen Passat Speaker Adapter "I made this design because no store adapters or other models on thingiverse would fit my ground zero gzrk 165sq 6,5"" speakers. I also made a water ring so the speaker won't die from water dripping down from the window." https://3dcarparts.org/library/1996/Volkswagen/Passat/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/bf01a8ab-b151-48c9-a95c-06226ea5c0ae/images/speaker-adapter-1_1777966643043_2enwrl.jpg in_stock 26.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Volkswagen/Passat/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fdd68294-feba-417f-988a-96ad0e06f9c0 1988 Volkswagen Passat Rear Wiper Delete Cover "A friend requested me to design this for him and so i did.
This Version is flat and ready to modify it in whatever way you want." https://3dcarparts.org/library/1988/Volkswagen/Passat/rear-wiper-delete-cover https://r2-upload.3dcarparts.workers.dev/file/parts/fdd68294-feba-417f-988a-96ad0e06f9c0/images/rear-wiper-delete-cover-1_1777966639463_achthb.jpg in_stock 10.15 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1988/Volkswagen/Passat/rear-wiper-delete-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-300105c2-2932-4201-a1b0-9a293bcafe7d 1997 Volkswagen Passat Headlight Leveling Adjuster "Spare part for Volkswagen Passat models B5 and B5.5, a model free of unnecessary lightening, which only made the part more fragile. The part is tested solid and fully functional.
This model tested on Depo 441-1178 lights." https://3dcarparts.org/library/1997/Volkswagen/Passat/headlight-leveling-adjuster https://r2-upload.3dcarparts.workers.dev/file/parts/300105c2-2932-4201-a1b0-9a293bcafe7d/images/headlight-leveling-adjuster-1_1777966634301_dv4zgp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1997/Volkswagen/Passat/headlight-leveling-adjuster?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c2be0a18-8c38-4eb8-b2fb-4fb74c908072 2009 Volkswagen Passat Rear Door Knob (Warning Triangle Compartment) Rear door knob Passat 3C (year 2009) https://3dcarparts.org/library/2009/Volkswagen/Passat/rear-door-knob-warning-triangle-compartment https://r2-upload.3dcarparts.workers.dev/file/parts/c2be0a18-8c38-4eb8-b2fb-4fb74c908072/images/rear-door-knob-warning-triangle-compartment-1_1777966629558_f8715h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Volkswagen/Passat/rear-door-knob-warning-triangle-compartment?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-74e10eed-1e9e-46d1-ba9a-08c8ecf84c41 1988 VW Passat Fuel Filler Door Lock Guide A voluntary donation would be fine ;-) https://3dcarparts.org/library/1988/VW/Passat/fuel-filler-door-lock-guide https://r2-upload.3dcarparts.workers.dev/file/parts/74e10eed-1e9e-46d1-ba9a-08c8ecf84c41/images/fuel-filler-door-lock-guide-1_1777966434182_ams0e3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1988/VW/Passat/fuel-filler-door-lock-guide?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aafadada-347f-4047-a6cc-fcd19765bb59 2007 Audi A4 Rear Window Shade Clip "My 2007 Audi A4 Wagon rear window shade clip fell appart (all of them broke). They are $28 from the dealer for 12 grams worth of cheap plastic poorly made.
I've had these for the past 12 months in sunny California weather. No issues.
Printed 80% up, slow print PLA or ABS." https://3dcarparts.org/library/2007/Audi/A4/rear-window-shade-clip https://r2-upload.3dcarparts.workers.dev/file/parts/aafadada-347f-4047-a6cc-fcd19765bb59/images/rear-window-shade-clip-1_1777966429433_ikgqxc.jpg in_stock 18.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Audi/A4/rear-window-shade-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3de25ccd-dbbc-48a9-9077-1f386472e42a 1994 Audi A4 Gauge Vent Pod "This replaces any of the center vents (not sure about other vents but probably will) for an a4 b5 and will fit a 52mm gauge. mounts the gauge at a 20 degree angle toward the driver.
Fitment is very good, my printer tends to print internal holes on the small size, so those holes are 20 thous. larger than measured. I included the solid part file if you want it." https://3dcarparts.org/library/1994/Audi/A4/gauge-vent-pod https://r2-upload.3dcarparts.workers.dev/file/parts/3de25ccd-dbbc-48a9-9077-1f386472e42a/images/gauge-vent-pod-1_1777966425708_srnflu.jpg in_stock 23.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A4/gauge-vent-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4df60740-de4b-4f8b-90da-7ec8fe7d65bc 1996 Audi A4 Armrest Hinge "First, sorry about my english :)
On my Car the armrest hinges were broken for years, and it annoyed me, until I bought a 3D printer and started making new ones.
One of my friends has the same problem on his car.
Our cars are the Audi A4 B5 Chassis, my 1996 YoM and his 2000. Car chassis are the same, so I thought the hinges were the same to, but they were not. So I made them special, one for him, one for me.
As shown in the pictures (The pics are from my car - YoM 1996), broken hinges should be cuted off straight with the base, and drill a 3.2mm hole in the center, for the screw.
From the bottom place a 1.5mm plate, at the top place hinges and tighten with screws
Two screws M3 x 20 and one M3 x 10 with M3 nuts are required" https://3dcarparts.org/library/1996/Audi/A4/armrest-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/4df60740-de4b-4f8b-90da-7ec8fe7d65bc/images/armrest-hinge-1_1777966418535_su6n7j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Audi/A4/armrest-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fad48c18-dbf6-4be1-9ab2-07485378a2e6 2001 Audi A4 Warning Triangle Holder Clip "Hi 3D Printing and Audi Loving Community,
My friends Car (Audi A4 B6) warningtriangle holder broke so i just got on Thingiverse and printed one. But i couldnt find one that was stable enough for my friend. I dont know how he closes his trunk but it did pop out every times.
So i decided to look for new solutions. I saw one guy on ebay that sold the 3D printed clip and the other thing with a screw and a washer for 15€. I thought that it is to much money for a 3D printed part that size so i design my own clip.
I had the broken original old clip so i used this to messure and design the new one.
If u need a clip without a screw i can recommend this Thing:
https://www.thingiverse.com/thing:2781839
And if u need the other Thing this is the one i used:
https://www.thingiverse.com/thing:2787379
I use a washer and a screw that i found in our shed, but i unfortunately dont know which size it is.
Allsow the thread in the inside is without a use. The screw i used didnt fit in perfectly i needed a little bit of force to screw it in place, but it holds perfectly.
It takes around 1h and 40 min to print both things with 100% infill, with Raft and tree support generated with Cura on my Ender 3V2.
So thats all i hope u can enjoy my Design
Your Plombir Gang" https://3dcarparts.org/library/2001/Audi/A4/warning-triangle-holder-clip https://r2-upload.3dcarparts.workers.dev/file/parts/fad48c18-dbf6-4be1-9ab2-07485378a2e6/images/warning-triangle-holder-clip-1_1777966415109_1zxamd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/A4/warning-triangle-holder-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a48525f4-ac8f-4ccd-8be9-a8b7972b4cc5 1994 Audi A4 Seat Back Clip Clip to fix a fallen seat back cover for a B5 Audi A4. My seat back was relatively deformed but it works. Can be fastened with Glue or a screw but Screw works better https://3dcarparts.org/library/1994/Audi/A4/seat-back-clip https://r2-upload.3dcarparts.workers.dev/file/parts/a48525f4-ac8f-4ccd-8be9-a8b7972b4cc5/images/seat-back-clip-1_1777966411908_iuqsiu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A4/seat-back-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7b730b2b-528c-427e-8343-4c2b849c0adf 2008 Audi A4 Inductive Charger Mount "inductive charger mount for Audi A4 B8.
Inlet: Romdink C1 (Qi Charger)
for Phones 155mm x 80mm or less." https://3dcarparts.org/library/2008/Audi/A4/inductive-charger-mount https://r2-upload.3dcarparts.workers.dev/file/parts/7b730b2b-528c-427e-8343-4c2b849c0adf/images/inductive-charger-mount-1_1777966353761_so5855.jpg in_stock 24.65 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Audi/A4/inductive-charger-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1d4ea755-3666-4c68-bc94-e409ab13138f 2008 Audi A4 Trunk Bag Hook "My Audi A4 B8 has originally awful bag hooks in the trunk, which are no good for anything. This design fits as a direct replacement for the original part and hold various types of bags much more securely than the original one.
Two versions available. The second version has improved hook to keep bags attached better. Both are working.
OE part number which this replaces: 3c9 867 160
According to internet, fits the following cars:
Audi A4 B8 Avant (I have tested only in this one)
Audi A7
Audi RS7
Audi S7
Audi Allroad
Volkswagen (VW) Jetta
Volkswagen Passat
Volkswagen Tiguan" https://3dcarparts.org/library/2008/Audi/A4/trunk-bag-hook https://r2-upload.3dcarparts.workers.dev/file/parts/1d4ea755-3666-4c68-bc94-e409ab13138f/images/trunk-bag-hook-1_1777966319282_abm6vv.jpg in_stock 11.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Audi/A4/trunk-bag-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-776c8fcb-76d5-4872-9176-4ebfc87a29ef 2002 Audi A4 Front Dashboard AC Vent Grill Clip Trim "For my Audi A4 2006, the original dashboard AC vent grill clips broke, so I modeled replacements in Fusion 360.
This is a replacement part for the Front Dashboard AC Air Vent Grill Pick Clip Trim used in the Audi A4 B6/B7 / Avant / S4 / RS4 / 8E Quattro (2002–2008).
The full set includes 4 pieces:
Side Left (1)
Middle Left (2)
Middle Right (3)
Side Right (4)
This upload provides the Side Right (4) and Middle Right (3) versions.
To print the Side Left (1) and Middle Left (2), simply mirror the models in your slicer.
Printing notes:
Best results: Print vertically with supports enabled.
Recommended material: HT PETG (tested and works well).
Other suitable options: ABS, ASA, Polycarbonate, Nylon, CF-blends.
Important: Car interiors can reach 60–70 °C+. Standard PLA and normal PETG will warp or fail.
Additional info:
This is the first version. Feedback is welcome to help improve and release revised versions." https://3dcarparts.org/library/2002/Audi/A4/front-dashboard-ac-vent-grill-clip-trim https://r2-upload.3dcarparts.workers.dev/file/parts/776c8fcb-76d5-4872-9176-4ebfc87a29ef/images/front-dashboard-ac-vent-grill-clip-trim-1_1777966309518_nz6anl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Audi/A4/front-dashboard-ac-vent-grill-clip-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f9433e61-2799-443e-832a-a97783cf1be9 1997 VW Jetta Seat Height Adjustment Handle Seat height adjustment handle for 1997 VW jetta(may fit other models). https://3dcarparts.org/library/1997/VW/Jetta/seat-height-adjustment-handle https://r2-upload.3dcarparts.workers.dev/file/parts/f9433e61-2799-443e-832a-a97783cf1be9/images/seat-height-adjustment-handle-1_1777965789090_pgre13.jpg in_stock 12.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/VW/Jetta/seat-height-adjustment-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-123a5300-693e-490a-bdf5-a9f8f981f7cc 1984 Volkswagen Jetta Center Dashboard Ventilation Flaps In the center of the dashboard, there are two vents, which can be seen in one of the images. This makes it look horrible. I didn't have a replacement part in my area, so I solved it by drawing and printing it on my Ender 3 3D printer. https://3dcarparts.org/library/1984/Volkswagen/Jetta/center-dashboard-ventilation-flaps https://r2-upload.3dcarparts.workers.dev/file/parts/123a5300-693e-490a-bdf5-a9f8f981f7cc/images/center-dashboard-ventilation-flaps-1_1777965781065_2cvc6w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Volkswagen/Jetta/center-dashboard-ventilation-flaps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-71656062-52f5-4852-96cc-8fb9ca60f26e 1979 Volkswagen T3 Vanagon Door Panel Clip Simple Panel Clip sized to fit T3 Vanagons. Most often you might use these with ABS panels that have pre drilled holes, or if you are making custom door cards. https://3dcarparts.org/library/1979/Volkswagen/T3%20Vanagon/door-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/71656062-52f5-4852-96cc-8fb9ca60f26e/images/door-panel-clip-1_1777965777510_db7nof.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Volkswagen/T3%20Vanagon/door-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-29d3d5fb-2b80-4952-9a39-3aac20067a9f 1990 Volkswagen Transporter Door Trim Clip Printed with PetG plastic, nozzle 240, table 70, airflow 100%, feed 50, open printer. Suitable for replacement part 701867299 VAG. Fits tight, you can reduce the part up to 90% https://3dcarparts.org/library/1990/Volkswagen/Transporter/door-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/29d3d5fb-2b80-4952-9a39-3aac20067a9f/images/door-trim-clip-1_1777965772020_ocphoz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volkswagen/Transporter/door-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a86ce5c2-c1ca-40c8-b4b5-929d9ff61d81 1984 Volkswagen Golf / Jetta Cup Holder Created with SketchUp https://3dcarparts.org/library/1984/Volkswagen/Golf%20%2F%20Jetta/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/a86ce5c2-c1ca-40c8-b4b5-929d9ff61d81/images/cup-holder-1_1777965765211_p728y2.jpg in_stock 13.39 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Volkswagen/Golf%20%2F%20Jetta/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-780471d2-2bb1-4b9a-8e4e-4abb8b9315c8 2010 Volkswagen Touran Visor Clip "A replacement for the broken visor clip of my VW Tourn 2010.
Print on its side! Very important, its to prevent layer separation in the clipping part.
It may be less pretty but you will hide it with the cover anyway.
Pop the cover off the broken clip (i use a mini crowbar)
Take the screws out.
Take the spring out of the broken clip.
Print the new clip on its side.
Put the old spring in the new clip.
Put everything back in the car.
Works like a charm!" https://3dcarparts.org/library/2010/Volkswagen/Touran/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/780471d2-2bb1-4b9a-8e4e-4abb8b9315c8/images/visor-clip-1_1777965649287_852u14.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Volkswagen/Touran/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0fb15511-679e-4598-b329-08ebfa0c4a09 2005 Volkswagen Jetta Headlight Dust Cover "I inherited a Volkswagen Jetta MK5 from a relative and discovered during routine maintenance that one of the headlight dust covers was missing. This allows water to enter the headlight assembly and corrode the electrical connections. After searching high and low for a replacement, and since I was learning FreeCAD, I decided to recreate the part as an exercise.
I plan on creating a gasket out of some spray foam to fill the channel around the outer ring for a proper seal.
**Edit: Added version 1.1 which has a slight angle to the outer wall of the gasket slot. The original design did fit, but I had to exert quite a bit of force to stretch it onto the mouting surface. This version should fit with much less effort.**" https://3dcarparts.org/library/2005/Volkswagen/Jetta/headlight-dust-cover https://r2-upload.3dcarparts.workers.dev/file/parts/0fb15511-679e-4598-b329-08ebfa0c4a09/images/headlight-dust-cover-1_1777965643018_dbgchc.jpg in_stock 16.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2005/Volkswagen/Jetta/headlight-dust-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-11804f23-0859-4a4b-ba42-e4898d630197 1990 Volkswagen Transporter Central Locking Pull Rod Clip (Tailgate/Door Lock) "Clip 171837199 for central locking pull rod VW T4 tailgate lock/door lock
100% infill
Support on - bed only
Rotated 45° for printing" https://3dcarparts.org/library/1990/Volkswagen/Transporter/central-locking-pull-rod-clip-tailgatedoor-lock https://r2-upload.3dcarparts.workers.dev/file/parts/11804f23-0859-4a4b-ba42-e4898d630197/images/central-locking-pull-rod-clip-tailgatedoor-lock-1_1777965639289_89jcr5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1990/Volkswagen/Transporter/central-locking-pull-rod-clip-tailgatedoor-lock?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b4eeac18-950c-4bcf-afbc-fb4d2c42643b 2017 VW Polo Parcel Shelf Clip "A replacement clip for the parcel shelf stoppers on a 2017 VW Polo.
This clip slides into the rubber ball on the end of the cord.
Probably fits other models too." https://3dcarparts.org/library/2017/VW/Polo/parcel-shelf-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b4eeac18-950c-4bcf-afbc-fb4d2c42643b/images/parcel-shelf-clip-1_1777965635623_3y1jfx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/VW/Polo/parcel-shelf-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9f8bfe3c-a3d0-4b15-8adc-fd54a48d4a45 2013 Volkswagen Passat Sun Visor Clip "My 2013 VW Passat replacement Sunvisor clip. Both were already broken when the vehicle was purchased.
I wanted a really nice finish on mine, so I printed it at 0.1mm layer height, 100% infill, on my Ender 5." https://3dcarparts.org/library/2013/Volkswagen/Passat/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9f8bfe3c-a3d0-4b15-8adc-fd54a48d4a45/images/sun-visor-clip-1_1777965630354_g0vly0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Volkswagen/Passat/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6079fd93-ab4b-4371-8a9f-08f6fdd42a3f 2020 VW ID.4 Floor Mat Clip "A replacement floor mat clip for VW ID.4, ID.5 and Skoda Enyaq. It may fit other VAG models, depending on the free space below the carpet.
This part replaces the bracket that sits under the carpet and can be screwed-in from above. Installing the original part (8E0864227) requires removing the carpet.
> Created 2024 by Tsvetomir Tsonev
> This work is released with CC0 into the public domain.
> https://creativecommons.org/publicdomain/zero/1.0/
>
> Uses threads.scad v2.1
> https://www.thingiverse.com/thing:1686322
> Created 2016-2017 by Ryan A. Colyer.
> This work is released with CC0 into the public domain.
> https://creativecommons.org/publicdomain/zero/1.0/" https://3dcarparts.org/library/2020/VW/ID.4/floor-mat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/6079fd93-ab4b-4371-8a9f-08f6fdd42a3f/images/floor-mat-clip-1_1777965626702_7wrh5f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/VW/ID.4/floor-mat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-82c274fc-72cc-43c9-8492-7858c090b2c0 1990 Volkswagen Transporter Side Mirror Clip Ball Joint "The glass in the side mirror on my T4 VW Transporter came out because the plastic clip ball joint broke. This is a replacement. The only thing missing are two side supports that stop the mirror spinning (I forgot to model them) but it doesn't make much of a difference.
No image because it worked first time and is in the van.
[Link to design in OnShape](https://cad.onshape.com/documents/a070449fe699a15440794e70/w/16b0a6a5e1fe891a6de18236/e/919538ef7b04728685f89762)" https://3dcarparts.org/library/1990/Volkswagen/Transporter/side-mirror-clip-ball-joint https://r2-upload.3dcarparts.workers.dev/file/parts/82c274fc-72cc-43c9-8492-7858c090b2c0/images/side-mirror-clip-ball-joint-1_1777965623329_034lu0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Volkswagen/Transporter/side-mirror-clip-ball-joint?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f04b5470-d377-4393-8c26-467fb5446d63 1997 Volkswagen Jetta Gas Lid Bumper Bumper for gas lid on 1997 VW jetta(may fit other models). https://3dcarparts.org/library/1997/Volkswagen/Jetta/gas-lid-bumper https://r2-upload.3dcarparts.workers.dev/file/parts/f04b5470-d377-4393-8c26-467fb5446d63/images/gas-lid-bumper-1_1777965620013_aut8nc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Volkswagen/Jetta/gas-lid-bumper?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-536611cd-915f-4615-8cfe-e47e32952be8 1996 Volkswagen Passat Bonnet Release Handle "My Bonnet Handle was brocken and I build a new one.
Works fine." https://3dcarparts.org/library/1996/Volkswagen/Passat/bonnet-release-handle https://r2-upload.3dcarparts.workers.dev/file/parts/536611cd-915f-4615-8cfe-e47e32952be8/images/bonnet-release-handle-1_1777965616805_4vb0a4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Volkswagen/Passat/bonnet-release-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-02799f91-1720-47a8-bd35-a74324ff588a 1998 Volkswagen Passat Armrest Cover Hinge "Replacement part for an armrest cover hinge for a VW-Passat '98. Two files. Left and Right leg.
Print the files on the side with the pin up. (with support)" https://3dcarparts.org/library/1998/Volkswagen/Passat/armrest-cover-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/02799f91-1720-47a8-bd35-a74324ff588a/images/armrest-cover-hinge-1_1777965419298_1gv3jm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Volkswagen/Passat/armrest-cover-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5aa00c4c-4502-47d8-af18-07c9f7635848 1996 Volkswagen Passat Headlamp Washer Cap The Right and Left Cap for a VW Passat 3B https://3dcarparts.org/library/1996/Volkswagen/Passat/headlamp-washer-cap https://r2-upload.3dcarparts.workers.dev/file/parts/5aa00c4c-4502-47d8-af18-07c9f7635848/images/headlamp-washer-cap-1_1777965414258_89lo0k.jpg in_stock 9.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1996/Volkswagen/Passat/headlamp-washer-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6508b111-4798-4d1f-ad3d-1d37d3ad5fa0 2003 Volkswagen Passat Door Trim Clip "Hi!
Here is a reproduction made with Sketchup of the clips that hold the door panel of a Volkswagen Passat 3BG from 2003, the Volkswagen reference number is: 3B0868243
I adapted the tip from this version https://www.thingiverse.com/thing:3088015
Hi!
These are the Volkswagen Passat 3BG 2003 interior door trim clips, the OEM number is:3B0868243, made with Sketchup.
I used part of https://www.thingiverse.com/thing:3088015
Cheers!" https://3dcarparts.org/library/2003/Volkswagen/Passat/door-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/6508b111-4798-4d1f-ad3d-1d37d3ad5fa0/images/door-trim-clip-1_1777965404142_t782z3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Volkswagen/Passat/door-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2a5751a0-7002-44d2-97b8-156a5d2ce0f9 2001 Volkswagen Passat Rear Ashtray Repair Part "Repair part for rear ashtray vw passat b5.5
print material PETG
No support need
drill hole 2 mm" https://3dcarparts.org/library/2001/Volkswagen/Passat/rear-ashtray-repair-part https://r2-upload.3dcarparts.workers.dev/file/parts/2a5751a0-7002-44d2-97b8-156a5d2ce0f9/images/rear-ashtray-repair-part-1_1777965399921_1apjbc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Volkswagen/Passat/rear-ashtray-repair-part?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f9f4d9fd-b0b3-4342-ac5d-ce12b4a79a1a 2015 Volkswagen Passat Shopping Bag Hook Extension Extension for VW Passat Variant B8 shopping bag hook. Original hooks are to small. https://3dcarparts.org/library/2015/Volkswagen/Passat/shopping-bag-hook-extension https://r2-upload.3dcarparts.workers.dev/file/parts/f9f4d9fd-b0b3-4342-ac5d-ce12b4a79a1a/images/shopping-bag-hook-extension-1_1777965396060_a6ty29.jpg in_stock 11.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Volkswagen/Passat/shopping-bag-hook-extension?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-affd41eb-1b68-4afa-a75e-64a6b31d14d6 1997 Volkswagen Passat Hood Latch Pull Remix of another hood latch pull. Remodeled it so that it's easier to print. Also ended up making it slightly shorter, but is still long enough to pop the hood. https://3dcarparts.org/library/1997/Volkswagen/Passat/hood-latch-pull https://r2-upload.3dcarparts.workers.dev/file/parts/affd41eb-1b68-4afa-a75e-64a6b31d14d6/images/hood-latch-pull-1_1777965392639_3n15sw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Passat/hood-latch-pull?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a7f382b9-d31a-48c8-aaa8-7b2e46eec15f 2003 Volkswagen Passat Cargo cover spring winder repair knot The trunk cover / cargo cover didn't close any more. The knot that winds up the spring was broken off, see pictures. With this it is an easy fix, it just fits inside the casing. https://3dcarparts.org/library/2003/Volkswagen/Passat/cargo-cover-spring-winder-repair-knot https://r2-upload.3dcarparts.workers.dev/file/parts/a7f382b9-d31a-48c8-aaa8-7b2e46eec15f/images/cargo-cover-spring-winder-repair-knot-1_1777965387689_bmjwqs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Volkswagen/Passat/cargo-cover-spring-winder-repair-knot?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8b6a1e55-9812-41a1-b0f7-fcf9f585d43e 2015 Volkswagen Passat Central Armrest Organizer Organizer armrest storage box for Passat B8 https://3dcarparts.org/library/2015/Volkswagen/Passat/central-armrest-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/8b6a1e55-9812-41a1-b0f7-fcf9f585d43e/images/central-armrest-organizer-1_1777965384686_o1aqii.jpg in_stock 20.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Volkswagen/Passat/central-armrest-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21428a07-0d18-44ba-b111-c46e2d15770c 2012 Volkswagen Passat Radio Button Replacement button for a 2012 Volkswagen Passat. Clips in place of the old ones and works perfectly. https://3dcarparts.org/library/2012/Volkswagen/Passat/radio-button https://r2-upload.3dcarparts.workers.dev/file/parts/21428a07-0d18-44ba-b111-c46e2d15770c/images/radio-button-1_1777965381683_l6lz34.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Volkswagen/Passat/radio-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-30eda0bb-8939-4b8d-8d4c-f342d4ea4df1 1988 VW Passat Fog light delete insert / air intake cover "My fog lights had damaged reflectors and i wouldn't pass TÜV inspection. Fog lights were optional in my paperwork so i designed some replacements instead of buying fog lights that might have the same damage as there are only 30 year old used ones available. They line up with the original lines/stripes of the front bumper. I am currently using the dummy version but i also made funnel/air intake versions with and without the lines/stripes.
You might have to do a little modification to your car: i drilled the mounting holes to 7 mm and put in rivet nuts (M5)" https://3dcarparts.org/library/1988/VW/Passat/fog-light-delete-insert-air-intake-cover https://r2-upload.3dcarparts.workers.dev/file/parts/30eda0bb-8939-4b8d-8d4c-f342d4ea4df1/images/fog-light-delete-insert-air-intake-cover-1_1777965375999_2psvk2.jpg in_stock 29.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1988/VW/Passat/fog-light-delete-insert-air-intake-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3c2dad1d-b248-4d43-bbc6-97fc7577a1da 2001 Volkswagen Passat Vent Grille "Horizontal air vent grill for Volkswagen Passat b5.5.
You will have to take out the whole air direction mechanism to assemble the broken part.
It might need a little gentle sanding on both end tips for smooth rotation." https://3dcarparts.org/library/2001/Volkswagen/Passat/vent-grille https://r2-upload.3dcarparts.workers.dev/file/parts/3c2dad1d-b248-4d43-bbc6-97fc7577a1da/images/vent-grille-1_1777965371730_obniug.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Volkswagen/Passat/vent-grille?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e298e17d-510a-4b80-9ba3-6b6b1f620ca7 1986 Volkswagen Passat Parcel Shelf Inner Corner Bracket "1986 VW Passat B2 (32B) fastback parcel shelf inner ear/bracket.
TPU 95A or PETG" https://3dcarparts.org/library/1986/Volkswagen/Passat/parcel-shelf-inner-corner-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e298e17d-510a-4b80-9ba3-6b6b1f620ca7/images/parcel-shelf-inner-corner-bracket-1_1777965365631_3x9ias.jpg in_stock 7.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1986/Volkswagen/Passat/parcel-shelf-inner-corner-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-67791b54-a6e7-4f6f-8e4a-312eb5bba95c 2017 Volkswagen Passat Trunk umbrella holder clips Gone are the days when the umbrella slides back and forth on the cargo area of the trunk while driving. The umbrella is simply attached with two clips to the two belt loops of the backrest. The holders can be easily removed to use the cargo area unobstructed with the backrest folded down. https://3dcarparts.org/library/2017/Volkswagen/Passat/trunk-umbrella-holder-clips https://r2-upload.3dcarparts.workers.dev/file/parts/67791b54-a6e7-4f6f-8e4a-312eb5bba95c/images/trunk-umbrella-holder-clips-1_1777965360274_7xdyze.jpg in_stock 12.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Volkswagen/Passat/trunk-umbrella-holder-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-756244bd-bf79-47ea-9882-d3e02b4e6459 2009 Volkswagen Passat Hazard Triangle Storage Door Lock Knob "Made a replacement knob and lock for the hazard triangle storagedoor on a VW Passat -09
Made it as two parts, first deteach the broken knob, without breaking the fastener ears for the knob. Then slide in the printed ""knob"" part and when its in place, attach the ""lock"" to the knob.
Its a tight fit, if you want to you can superglue the lock on to the knob to secure it wont fall off. Just remember to allign it with the hole before you glue!
Added a smaller ""lock"" if you dont want it to be too tight and accedently break it when closing the door
Use a coin or something flat to open and close the lock." https://3dcarparts.org/library/2009/Volkswagen/Passat/hazard-triangle-storage-door-lock-knob https://r2-upload.3dcarparts.workers.dev/file/parts/756244bd-bf79-47ea-9882-d3e02b4e6459/images/hazard-triangle-storage-door-lock-knob-1_1777965354430_ibod82.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Volkswagen/Passat/hazard-triangle-storage-door-lock-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9ca3aab2-971c-46ff-98a9-bdd8a5042c81 2002 Volkswagen Passat Radio Knob "A friend was missing one of the knobs (base, treble, ect), the toughest part was making the half circle interaction.
Used PLA, build with a 0.2 mm nozzle, and added brim 5~10 mm offset for the entire object. Moving the nozzle away from the part as too allow proper cool down. You will need to play with shell thicknesses to get the right final dim. And I increased the overall size by 1.02 to make a perfect fit. Print slow, take your time." https://3dcarparts.org/library/2002/Volkswagen/Passat/radio-knob https://r2-upload.3dcarparts.workers.dev/file/parts/9ca3aab2-971c-46ff-98a9-bdd8a5042c81/images/radio-knob-1_1777965350830_yv60iu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Volkswagen/Passat/radio-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f0b9b51-1262-4ad9-988f-d26aff14de81 2001 Volkswagen Jetta Vent Gauge Pod Dual gauge vent I designed for my car. https://3dcarparts.org/library/2001/Volkswagen/Jetta/vent-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/8f0b9b51-1262-4ad9-988f-d26aff14de81/images/vent-gauge-pod-1_1777964968767_io6lp3.jpg in_stock 18.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Volkswagen/Jetta/vent-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d875a2c5-c2e3-408e-b611-fe094d3d65ae 2019 Volkswagen Jetta Coin Tray "Here's a coin tray for your new Jetta!
It fits better one way than the other, even if it's pretty close, because the center console is not perfectly parallel side to side (try both ways to find best fit).
Use a velcro on both sides to help it stay in place (see picture).
The side cutouts allow for the USB cable going to the back seats to still be able to use the cutouts made in the console, and the tray is shallow enough that the usb plug does not interfere with the tray." https://3dcarparts.org/library/2019/Volkswagen/Jetta/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/d875a2c5-c2e3-408e-b611-fe094d3d65ae/images/coin-tray-1_1777964962825_s2kgbe.jpg in_stock 16.51 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Volkswagen/Jetta/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-729bd1ce-7c37-4950-a7e4-6ef467668558 2005 Volkswagen Jetta License Plate Light My VW Jetta mk5's license plate lightning was broken. Printed with transparent filament and worked fine. OEM number for this is 3b5943021e https://3dcarparts.org/library/2005/Volkswagen/Jetta/license-plate-light https://r2-upload.3dcarparts.workers.dev/file/parts/729bd1ce-7c37-4950-a7e4-6ef467668558/images/license-plate-light-1_1777964959136_h9qtay.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2005/Volkswagen/Jetta/license-plate-light?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c7661e7-5b29-4529-9e14-d26334b0d7a1 1999 Volkswagen Golf / Jetta Armrest Delete Panel (Flat Bottom) "I had trouble printing it because the model doesn't sit flush, I cut the bottom off to make it flush and it printed nicely.
Had to size it up 1.25% to make it fit PERFECTLY nice job. (may differ for you, Try first and size up afterwards.)
Printed with PETG" https://3dcarparts.org/library/1999/Volkswagen/Golf%20%2F%20Jetta/armrest-delete-panel-flat-bottom https://r2-upload.3dcarparts.workers.dev/file/parts/2c7661e7-5b29-4529-9e14-d26334b0d7a1/images/armrest-delete-panel-flat-bottom-1_1777964955429_3r82fu.jpg in_stock 15.95 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Golf%20%2F%20Jetta/armrest-delete-panel-flat-bottom?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6e759407-5c09-4eba-a85c-9ba244221ad3 1999 Volkswagen Golf / GTI / Jetta / Passat / Bora Ashtray "If you like this, like it and collect it so others can find it too!
1-to-1 replacement for the ashtray in VW Mk4 vehicles. Handy in case the original ashtray is missing, heavily soiled, or just plain the wrong color.
Recommend printing in nylon or other high-temp plastic so as to avoid warping in the hot sun." https://3dcarparts.org/library/1999/Volkswagen/Golf%20%2F%20GTI%20%2F%20Jetta%20%2F%20Passat%20%2F%20Bora/ashtray https://r2-upload.3dcarparts.workers.dev/file/parts/6e759407-5c09-4eba-a85c-9ba244221ad3/images/ashtray-1_1777964948805_4snghe.jpg in_stock 16.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Golf%20%2F%20GTI%20%2F%20Jetta%20%2F%20Passat%20%2F%20Bora/ashtray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-277eefed-0fe2-4542-b22b-bd56dab6bb2a 2003 VW Jetta Wagon Privacy Shade Repair Pieces "These pieces will fix a broken cargo shade in a MKIV VW Jetta Wagon. May also fit the Audi A4 Wagon if it uses the same shade. May fit the Passat as well. What I know for sure is it works in my 2003 Jetta Wagon.
What happens is the plastic pegs inside get brittle, break from the spring tension, and the shade hangs limp. This fix spreads the load over a larger area of the printed replacement and should take some stress off of the plastic end caps." https://3dcarparts.org/library/2003/VW/Jetta%20Wagon/privacy-shade-repair-pieces https://r2-upload.3dcarparts.workers.dev/file/parts/277eefed-0fe2-4542-b22b-bd56dab6bb2a/images/privacy-shade-repair-pieces-1_1777964943868_i5oa9m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/VW/Jetta%20Wagon/privacy-shade-repair-pieces?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7925bcc-d8f6-4ea8-ad9d-6bb674f35c13 1999 Volkswagen Golf / GTI / Jetta / Bora Center Armrest Console Latch "Replacement part for center armrest console latch, as pictured. Should fit many early 2000's VW cars.
Requires an 8mm diameter spring of length ~12mm. Recommend printing out of nylon or other high temp plastic." https://3dcarparts.org/library/1999/Volkswagen/Golf%20%2F%20GTI%20%2F%20Jetta%20%2F%20Bora/center-armrest-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/f7925bcc-d8f6-4ea8-ad9d-6bb674f35c13/images/center-armrest-console-latch-1_1777964804737_z6de9t.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Golf%20%2F%20GTI%20%2F%20Jetta%20%2F%20Bora/center-armrest-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5258c29c-3747-4696-b4d6-e65268391840 1999 VW Golf/Jetta Roof Rack Rail Endcaps "My son managed to get a pair of OE roof racks from a salvage yard for his 2003 VW Jetta, but they didn't have the endcaps. He asked me to design a set for him that could be 3D-printed, so this is what I came up with. These also make use of a set of lock cylinders that I found on Amazon. I've never had the OE endcaps to go off of, so I designed these from scratch strictly with the rails available at my disposal.
Here's a quick video that shows the cap being slid on and use of the keyed cylinder to lock it in place: https://youtu.be/gNnbCHxs3no
I printed a prototype using PLA, but for production, you'd probably want to use something like ABS. I don't have a set-up to allow me to do that, so I'll see if a friend can do that for us. I'd recommend getting close to 100% infill just to give it rigidity -- at that density, each endcap assembly will use up around 90g of filament (so assuming you print a set of 4, that's around 400g).
I found that printing the ""lower"" portion was best done with it up on end, with a wide brim for bed adhesion, and supports (using Tree Supports worked well for me). The guide bar and the ""upper"" portion can just be printed as provided, with no supports. I aimed for 0.12mm layer heights to ""smooth out"" the arcs as much as possible, but you can use whatever layer height makes sense to you. The guide bar is meant to just fit into the upper part and be secured by friction. Using a mallet to get the parts to mate permanently gave me great results. The lower and upper parts can be glued together if you wish, although I found it wasn't totally necessary." https://3dcarparts.org/library/1999/VW/Golf%2FJetta/roof-rack-rail-endcaps https://r2-upload.3dcarparts.workers.dev/file/parts/5258c29c-3747-4696-b4d6-e65268391840/images/roof-rack-rail-endcaps-1_1777964795841_qkdo7x.jpg in_stock 20.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/VW/Golf%2FJetta/roof-rack-rail-endcaps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1b28569c-ef8b-4770-a6e6-bf9457d3a930 1985 Volkswagen Jetta/Golf Morimoto D2S Projector Mount This is a mount I created to fit Morimoto D2s projectors into MK2 Jetta/Golf headlights. I had to cut the back of the headlight to get the Projector back far enough to clear the headlight lens, to do this I made these mounts that I glued to the back of the headlight assembly. This mount has a recessed portion for the H4 indexing piece to help align the projector easily. https://3dcarparts.org/library/1985/Volkswagen/Jetta%2FGolf/morimoto-d2s-projector-mount https://r2-upload.3dcarparts.workers.dev/file/parts/1b28569c-ef8b-4770-a6e6-bf9457d3a930/images/morimoto-d2s-projector-mount-1_1777964789055_9iv04q.jpg in_stock 14.74 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1985/Volkswagen/Jetta%2FGolf/morimoto-d2s-projector-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8adf0c6b-7a4b-41cf-a6e5-862578f65669 1979 Volkswagen Transporter Door Handle Screw Clip measures from original part https://3dcarparts.org/library/1979/Volkswagen/Transporter/door-handle-screw-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8adf0c6b-7a4b-41cf-a6e5-862578f65669/images/door-handle-screw-clip-1_1777964785152_ba2s24.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1979/Volkswagen/Transporter/door-handle-screw-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a9ece16e-96f9-457c-8897-93bc43e40eab 1999 Volkswagen Golf Seat Recline Adjustment Knob This is what i drew up to replace my broken car seat adjustment knob in my golf gti 1.8turbo -99. Might also fit other vw (jetta/bora) cars from the same year. https://3dcarparts.org/library/1999/Volkswagen/Golf/seat-recline-adjustment-knob https://r2-upload.3dcarparts.workers.dev/file/parts/a9ece16e-96f9-457c-8897-93bc43e40eab/images/seat-recline-adjustment-knob-1_1777964776827_ult66m.jpg in_stock 16.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Golf/seat-recline-adjustment-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5eb7b285-bdca-42ce-b36d-a53ed24b7535 1979 VW T3 Vanagon Fan Vent Box Clip Because I broke one of the clips during maintenance on the vent box I reconstructed the clips. Fits 100% on my VW T3 Whitestar Multivan. https://3dcarparts.org/library/1979/VW/T3%20Vanagon/fan-vent-box-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5eb7b285-bdca-42ce-b36d-a53ed24b7535/images/fan-vent-box-clip-1_1777964771959_uk02uz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/VW/T3%20Vanagon/fan-vent-box-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-986d8335-93c2-47f6-ba1e-316dcd6675cf 1983 Volkswagen Golf Gauge Vent Pod Vent for a mk2 golf with mounting for an AEM gauge. Made two versions, one with angled fins and another with the fins pointing straight. Used the thick rubber bushing that came with the gauge and tightened it unequally to get it to point slightly towards the driver. https://3dcarparts.org/library/1983/Volkswagen/Golf/gauge-vent-pod https://r2-upload.3dcarparts.workers.dev/file/parts/986d8335-93c2-47f6-ba1e-316dcd6675cf/images/gauge-vent-pod-1_1777964766555_5pcoyz.jpg in_stock 12.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/gauge-vent-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-195b20e6-a05d-4a3d-99f3-95f411985abe 1990 Volkswagen T4 Multivan Folding Table Clip "Replacement clip to keep the Multivan table closed
Edit 13/05/2021: added new version v7 better suited to keep the table closed more securely
Edit 06/06/2021: New thicker and more rigid version because the table was still opening on its own with v7." https://3dcarparts.org/library/1990/Volkswagen/T4%20Multivan/folding-table-clip https://r2-upload.3dcarparts.workers.dev/file/parts/195b20e6-a05d-4a3d-99f3-95f411985abe/images/folding-table-clip-1_1777964760910_b2s34d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volkswagen/T4%20Multivan/folding-table-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-038c0f57-ecb1-420d-83de-38e17ea6fbb1 1999 Volkswagen Golf/Jetta Vent Gauge Pod fits pretty good. The hole for the gauge is just under 52mm so it fits tight. I have not hooked up the gauge yet but am pleased with the fitment so far. https://3dcarparts.org/library/1999/Volkswagen/Golf%2FJetta/vent-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/038c0f57-ecb1-420d-83de-38e17ea6fbb1/images/vent-gauge-pod-1_1777964756355_d6udv9.jpg in_stock 15.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Golf%2FJetta/vent-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3700cf42-d73e-43d2-8ea0-8dd8e979812f 1990 Volkswagen T4 Rear View Mirror Clamp Plate Rear view mirror clamp plate for ball-type mount. This one is made for VW T4 van, may be suitable for other VAG automobiles. https://3dcarparts.org/library/1990/Volkswagen/T4/rear-view-mirror-clamp-plate https://r2-upload.3dcarparts.workers.dev/file/parts/3700cf42-d73e-43d2-8ea0-8dd8e979812f/images/rear-view-mirror-clamp-plate-1_1777964514665_3bdyk6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volkswagen/T4/rear-view-mirror-clamp-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ab8187e2-4216-45a7-8c5b-f6046eace879 1996 Volkswagen Polo Rear Window Washer Nozzle "Sprinkler for rear window in one of my (actually only) retro cars got broken and lost long time in The Past.
As shooting random people with window cleaner fluid while you try to wipe back window was probably funny as in youtube video, but not really appreciated by people who are personally concerned , i've decided to print replacement nozzle.
It will definitelly fit 3 door version of 1996 VW polo 6n.
It might fit other VW cars about this date (probably up to 2001) like jetta, golf, etc.
v2 uses slightly larger nozzle sizes - pick it if your printer can't print v1 reliably.
v3 - i think final version. it sprinkles where it should, it can be locked securely, and it got improved shape to allow excess fluid to drop from it's bottom tip instead of spoiling VW logo below. Also it got (most) overhangs resolved." https://3dcarparts.org/library/1996/Volkswagen/Polo/rear-window-washer-nozzle https://r2-upload.3dcarparts.workers.dev/file/parts/ab8187e2-4216-45a7-8c5b-f6046eace879/images/rear-window-washer-nozzle-1_1777964508220_q5p94p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1996/Volkswagen/Polo/rear-window-washer-nozzle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c1229a50-2ee8-48a8-ae8f-c4469145c68f 1999 Volkswagen Jetta Glove Box Screw Repair Retainer "Here are printable retainers for VW Mk4 Jetta Glove Boxes. The plastic becomes brittle on the glove boxes and the screw tears though. This retainer will fit into the broken screw holes allowing you to re-attach your old glove box.
Each file is labeled for which hole they fit as each hole is different on the glove box.
Depending how the plastic broke away around the screw hole, you may need to trim/sand away some additional plastic from the glove box to allow these retainers to fit." https://3dcarparts.org/library/1999/Volkswagen/Jetta/glove-box-screw-repair-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/c1229a50-2ee8-48a8-ae8f-c4469145c68f/images/glove-box-screw-repair-retainer-1_1777964497424_7dtmib.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Jetta/glove-box-screw-repair-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-15963977-a48a-4460-964b-e77d9da78566 1997 Volkswagen Jetta Vent Flaps "Vent flaps for 1997 vw jetta(may fit other models).
These will fit the first and third vents from the left, I didn't need the other two but if someone wants them I can design those upon request." https://3dcarparts.org/library/1997/Volkswagen/Jetta/vent-flaps https://r2-upload.3dcarparts.workers.dev/file/parts/15963977-a48a-4460-964b-e77d9da78566/images/vent-flaps-1_1777964483873_8xvl1d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Jetta/vent-flaps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b9721a3b-f8f9-4d4c-9108-409f498570f3 1990 Volkswagen Transporter Door Rod Clip Small door clip that holds the door opening rod in place, these are no longer available. https://3dcarparts.org/library/1990/Volkswagen/Transporter/door-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b9721a3b-f8f9-4d4c-9108-409f498570f3/images/door-rod-clip-1_1777964480019_r16iyr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volkswagen/Transporter/door-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-35ac9dcc-4755-4efd-88bd-458bac573b79 2002 Volkswagen Golf / Beetle / Jetta Blend Door Repair Plugs "Fix for MKIV VW Blend Doors.
Drawn based on my 2002 VW Golf TDI, should fit all MK4 Golf/Beetle/Jetta
Install with an RTV(May have an odor for a little bit) or some kind of epoxy resin. I used JB Weld KwickWeld.
Required:
1x Big Slotted Plug
3x Small Slotted Plug
11x Small Plug
6x Big Plug
I printed mine out of a combination of ABS and PETG when I ran out of ABS. I've been running them for 3 weeks now using the heater full blast with no issues so far." https://3dcarparts.org/library/2002/Volkswagen/Golf%20%2F%20Beetle%20%2F%20Jetta/blend-door-repair-plugs https://r2-upload.3dcarparts.workers.dev/file/parts/35ac9dcc-4755-4efd-88bd-458bac573b79/images/blend-door-repair-plugs-1_1777964467905_cgi35m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Volkswagen/Golf%20%2F%20Beetle%20%2F%20Jetta/blend-door-repair-plugs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dfb8e1fc-5224-42f4-8108-735fdbaf1e59 1999 Volkswagen Golf Interior Driver Door Handle Trim "This is a replacement part for the interior driver door handle on many VW vehicles from the early 2000's (see title).
It is not an exact one-to-one match; some of the unnecessary latching features were removed for simplicity sake. It mounts correctly and holds on well nonetheless.
Recommend printing it in the tall dimension as shown in the pictures; recommend printing out of nylon or other high-temp material." https://3dcarparts.org/library/1999/Volkswagen/Golf/interior-driver-door-handle-trim https://r2-upload.3dcarparts.workers.dev/file/parts/dfb8e1fc-5224-42f4-8108-735fdbaf1e59/images/interior-driver-door-handle-trim-1_1777964461937_by6zgx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Golf/interior-driver-door-handle-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3fd35e16-13a5-4bf7-8a69-f17cc84ccc3a 2003 Volkswagen Transporter Curtain Rail End Clip Replacement curtain rail end clip for VW T5 Van. https://3dcarparts.org/library/2003/Volkswagen/Transporter/curtain-rail-end-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3fd35e16-13a5-4bf7-8a69-f17cc84ccc3a/images/curtain-rail-end-clip-1_1777964458442_6dxsyz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Volkswagen/Transporter/curtain-rail-end-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6e5a620f-1762-4c03-9796-405300d44380 1979 Volkswagen T3 Sun Roller Blind Clip "Clip for a VW T3 Dehler Profi sun roller blind.
Printed it with TPU so it is flexible.
PLA would warp in the car at high heat.
ABS could also work but that would be too stiff for me.
When printing with TPU make sure to print slowly with little cooling!
An enclosure of the printer is not necessary.
UPDATE 20.12.2020
Version 2 is shorter" https://3dcarparts.org/library/1979/Volkswagen/T3/sun-roller-blind-clip https://r2-upload.3dcarparts.workers.dev/file/parts/6e5a620f-1762-4c03-9796-405300d44380/images/sun-roller-blind-clip-1_1777963979556_o0ihds.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Volkswagen/T3/sun-roller-blind-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a38bb905-aa94-4ecc-a202-b35deb65ef7a 1983 Volkswagen Golf Seat Adjuster Knob This is a seat adjuster knob for the VW Golf 2 which has a shaft with two flat sides (12.2mm * 9mm). https://3dcarparts.org/library/1983/Volkswagen/Golf/seat-adjuster-knob https://r2-upload.3dcarparts.workers.dev/file/parts/a38bb905-aa94-4ecc-a202-b35deb65ef7a/images/seat-adjuster-knob-1_1777963790127_kv2j50.jpg in_stock 19.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/seat-adjuster-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ae760599-9b5d-4eb9-95ab-bce6e7c33bf9 1983 Volkswagen Golf Trunk Lid Handle Dowel My old ones wore out. Ive printed them in HIPS. Nylon would be better but it works :) https://3dcarparts.org/library/1983/Volkswagen/Golf/trunk-lid-handle-dowel https://r2-upload.3dcarparts.workers.dev/file/parts/ae760599-9b5d-4eb9-95ab-bce6e7c33bf9/images/trunk-lid-handle-dowel-1_1777963786567_olx8jf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1983/Volkswagen/Golf/trunk-lid-handle-dowel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-08ee20ca-2a8b-4711-8502-bd4d32a583bd 1983 Volkswagen Golf Glove Box Clip "Made this because I was missing a piece so the glove box kept falling when opened.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1SIXOcDh5Kf" https://3dcarparts.org/library/1983/Volkswagen/Golf/glove-box-clip https://r2-upload.3dcarparts.workers.dev/file/parts/08ee20ca-2a8b-4711-8502-bd4d32a583bd/images/glove-box-clip-1_1777963782507_7zlev7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/glove-box-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3f5bac56-4df5-41da-9070-595292faf7f3 1996 Volkswagen Golf Window Crank Delete Plug "I own a vw golf 3 from 1996, and converted from crank windows to power windows. and now i have a hole in my door panel where the crank was and i did not have the time to find the proper doorpanels(not very common around here) so i quickly desgined this to plug the hole. its a quick simple print and then just pops in place. 10% infill workt fine for me without supports. post a make if you have made it:) and feel free ask questions
this works on all Golf 3/3,5, Vento and Jetta Mk3.
install: https://youtu.be/-WjrBFl-ldM?si=eB0sfUW33RWRYvtv" https://3dcarparts.org/library/1996/Volkswagen/Golf/window-crank-delete-plug https://r2-upload.3dcarparts.workers.dev/file/parts/3f5bac56-4df5-41da-9070-595292faf7f3/images/window-crank-delete-plug-1_1777963778770_7k6qnv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Volkswagen/Golf/window-crank-delete-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13ea3f6a-1a51-4d80-8934-83bd0c3b2e1b 1983 Volkswagen Golf External Molding Clip Fastener "Clip Fastening external moldings Volkswagen Golf 2
Clip for external moldings Golf 2" https://3dcarparts.org/library/1983/Volkswagen/Golf/external-molding-clip-fastener https://r2-upload.3dcarparts.workers.dev/file/parts/13ea3f6a-1a51-4d80-8934-83bd0c3b2e1b/images/external-molding-clip-fastener-1_1777963773896_lii76w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1983/Volkswagen/Golf/external-molding-clip-fastener?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-92d09a12-74d1-46ad-8032-2f1e4a3a97e2 1993 Volkswagen Jetta/Golf Trunk Grommet "Made a replacement grommet for my trunk to print in TPU. the driver side part is available at the dealer but the passenger side is tricky to find so i just designed my own. fits pretty well when printed in TPU.
8/10 update: added a model that works with the driver side. one version includes a split to easily slide the plug over the wire vs having to reroute the entire wire just to install the plug. working on models to fill top trunk holes as well. will upload soon" https://3dcarparts.org/library/1993/Volkswagen/Jetta%2FGolf/trunk-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/92d09a12-74d1-46ad-8032-2f1e4a3a97e2/images/trunk-grommet-1_1777963765745_5hgyb9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Volkswagen/Jetta%2FGolf/trunk-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-82f6e41b-3814-46ae-8508-22278338663b 1991 Volkswagen Golf Switch Blank "This is a blank for the Golf Mk1 dash. Specifically, I designed this for the pictured area of my 1991 Cabriolet, but it should fit many other Golfs, probably in other places. It replaces VW part 321 957 087.
You may want to paint it, or at least polish it: See the second in-car photo for what one looks like printed in black PLA." https://3dcarparts.org/library/1991/Volkswagen/Golf/switch-blank https://r2-upload.3dcarparts.workers.dev/file/parts/82f6e41b-3814-46ae-8508-22278338663b/images/switch-blank-1_1777963762322_fj0fbj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Volkswagen/Golf/switch-blank?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-31306121-cef1-44ea-9024-b92e21259ba0 2007 Volkswagen Golf Vent Adjuster Adjusted the slot length to be compatible with 2007 VW Golf front air vents https://3dcarparts.org/library/2007/Volkswagen/Golf/vent-adjuster https://r2-upload.3dcarparts.workers.dev/file/parts/31306121-cef1-44ea-9024-b92e21259ba0/images/vent-adjuster-1_1777963756176_onlcb8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Volkswagen/Golf/vent-adjuster?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21dfbd12-2087-4699-9b05-ac87a022d14c 2007 Volkswagen EOS Trunk Divider Clip "This is a clip to hold the trunk divider of the VW EOS, my car did not come with one, so I made one myself.
It is part number 81 in the next page:
https://volkswagen.7zap.com/en/rdw/eos/eos/2007-482/8/867-867080/
The clip is actually on the left side, see my pictures.
Print with PETG or ABS." https://3dcarparts.org/library/2007/Volkswagen/EOS/trunk-divider-clip https://r2-upload.3dcarparts.workers.dev/file/parts/21dfbd12-2087-4699-9b05-ac87a022d14c/images/trunk-divider-clip-1_1777963752170_8c3itq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Volkswagen/EOS/trunk-divider-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a5d56d22-8a99-40b0-bd5b-7077f8d14393 1974 Volkswagen Golf H4 Headlight Splash Guard Cover VW H4 headlight splash guard cover for Golf 1 / Caddy 14d https://3dcarparts.org/library/1974/Volkswagen/Golf/h4-headlight-splash-guard-cover https://r2-upload.3dcarparts.workers.dev/file/parts/a5d56d22-8a99-40b0-bd5b-7077f8d14393/images/h4-headlight-splash-guard-cover-1_1777963736043_gxi0yl.jpg in_stock 9.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1974/Volkswagen/Golf/h4-headlight-splash-guard-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2113f22e-eb58-4be3-b18c-e4382ffde509 1983 Volkswagen Golf Side Skirt Repair Kit Clips Golf 2 Repair Kit Side Skirt, Widening Clips https://3dcarparts.org/library/1983/Volkswagen/Golf/side-skirt-repair-kit-clips https://r2-upload.3dcarparts.workers.dev/file/parts/2113f22e-eb58-4be3-b18c-e4382ffde509/images/side-skirt-repair-kit-clips-1_1777963499245_yntrcf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1983/Volkswagen/Golf/side-skirt-repair-kit-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d619d623-1ba0-4676-b130-09adfef6e4c2 1991 Volkswagen Golf Door Lock Pin Volkswagen front and back door pin`s https://3dcarparts.org/library/1991/Volkswagen/Golf/door-lock-pin https://r2-upload.3dcarparts.workers.dev/file/parts/d619d623-1ba0-4676-b130-09adfef6e4c2/images/door-lock-pin-1_1777963485093_vf1qoc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Volkswagen/Golf/door-lock-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ea8bd227-7ee1-4cd2-b045-5aca5a9ab27f 2008 Volkswagen Golf VI Headlight Cover "The headlight cover in my VW Golf 6 was broken. I could not find a suitable replacement, so I modelled it myself.
This is the replacement cover for the normal rubber cover of the main lamp of a Golf VI.
As this is a rubber part you should use some flexible filament (e.g. FilaFlex) to print." https://3dcarparts.org/library/2008/Volkswagen/Golf%20VI/headlight-cover https://r2-upload.3dcarparts.workers.dev/file/parts/ea8bd227-7ee1-4cd2-b045-5aca5a9ab27f/images/headlight-cover-1_1777963481685_7ad84o.jpg in_stock 15.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2008/Volkswagen/Golf%20VI/headlight-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3079244c-9b0a-47be-9f5e-c2f04245cf22 1998 Volkswagen / Audi / Seat Multiple Trunk Lining Rotary Latch Knob "VW / Audi Locking Latch – Original latch for trunk lining
Part No. / Part Number: 1J0 867 468 B41
OE/OEM Reference Number(s)
7N086705482V, 7N0867054 82V
VW Bora Saloon 1999 - 2005
VW Caddy 2004 -
VW Golf Cabriolet 2012 -
VW Golf 4 Saloon 1998 - 2002
VW Golf 5 Saloon 2003 - 2006
VW Golf 5 Variant 2007 - 2009
VW Golf 6 Variant 2010 - 2014
VW Golf 7 Variant 2014 -
VW Jetta A5 (1K) 2006 - 2010
VW Passat 3C B6 Saloon / Variant 2006 - 2011
VW Passat 3C B7 Saloon / Variant 2011 - 2015
VW Sharan 7N 2011 -
VW Tiguan 5N 2008 - 2015
VW Touran 2006 - 2010
Audi A5 / S5 Sportback 2008 - 18.10.2010
Audi Q7 4L 2007 - 2015
Seat Alhambra 2011 -" https://3dcarparts.org/library/1998/Volkswagen%20%2F%20Audi%20%2F%20Seat/Multiple/trunk-lining-rotary-latch-knob https://r2-upload.3dcarparts.workers.dev/file/parts/3079244c-9b0a-47be-9f5e-c2f04245cf22/images/trunk-lining-rotary-latch-knob-1_1777963474676_7e96lr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Volkswagen%20%2F%20Audi%20%2F%20Seat/Multiple/trunk-lining-rotary-latch-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2fe504c9-756f-450f-863f-dc6cdb398174 2011 Volkswagen Jetta SportWagen Sunglass Box Clip "Clip to re-secure the sunglasses box that is in the ceiling of the 2011 VW Jetta Sportwagen.
Our sunglass box basically just fell out of the ceiling on to my lap one day. Trying to put it back in, I ended up breaking off both of the little plastic clips that are supposed to hold it in place. To fix this, I printed a clip that slips through a hole in the top of the sunglasses box and fits right into the hole the original clip went in to. Works great.
I did have to shave off the remainders of the old clips to get the new clip to fit." https://3dcarparts.org/library/2011/Volkswagen/Jetta%20SportWagen/sunglass-box-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2fe504c9-756f-450f-863f-dc6cdb398174/images/sunglass-box-clip-1_1777963471674_pao9es.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Volkswagen/Jetta%20SportWagen/sunglass-box-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54a229e6-1715-4426-963e-3c8c502555b5 2006 Volkswagen Jetta Air Vent Louver Control Slider VW Jetta 2006 had broken A/C vent louver control sliders. Slip this part over the horizontal louver and capture the vertical louver control rod with the fork. https://3dcarparts.org/library/2006/Volkswagen/Jetta/air-vent-louver-control-slider https://r2-upload.3dcarparts.workers.dev/file/parts/54a229e6-1715-4426-963e-3c8c502555b5/images/air-vent-louver-control-slider-1_1777963466697_dv9yav.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Volkswagen/Jetta/air-vent-louver-control-slider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7d8d6ed3-b47a-4337-88a0-512ddb4d917a 1986 Volkswagen Jetta Door Lock Knob and Collar Replacement door lock knob and collar for my 1986 Volkswagen Jetta MK2. I recommend printing with ABS and then vapor smoothing with acetone to get the same shiny polished look as the original. https://3dcarparts.org/library/1986/Volkswagen/Jetta/door-lock-knob-and-collar https://r2-upload.3dcarparts.workers.dev/file/parts/7d8d6ed3-b47a-4337-88a0-512ddb4d917a/images/door-lock-knob-and-collar-1_1777963460189_rwreh4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1986/Volkswagen/Jetta/door-lock-knob-and-collar?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4432bd80-bb92-483c-a6f9-2af4f8aa3b12 1998 Volkswagen Bora / Jetta Right Headlight Rear Cover Bora/mk4 jetta headlight cover, which I made from my cars right headlight andits fits perfectly, but needs a little silicon or something to make a seal like the originial. https://3dcarparts.org/library/1998/Volkswagen/Bora%20%2F%20Jetta/right-headlight-rear-cover https://r2-upload.3dcarparts.workers.dev/file/parts/4432bd80-bb92-483c-a6f9-2af4f8aa3b12/images/right-headlight-rear-cover-1_1777963450821_lrnm7n.jpg in_stock 17.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1998/Volkswagen/Bora%20%2F%20Jetta/right-headlight-rear-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1296128d-f69b-4655-b77f-f019516caefe 1991 Volkswagen Golf Door Lock Knob "Replacement latch for Golf 3 Volkswagen
locking tee for VW Golf MK3's doors" https://3dcarparts.org/library/1991/Volkswagen/Golf/door-lock-knob https://r2-upload.3dcarparts.workers.dev/file/parts/1296128d-f69b-4655-b77f-f019516caefe/images/door-lock-knob-1_1777962764185_w6q1ln.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Volkswagen/Golf/door-lock-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-803307b9-28d7-4f89-8e55-9e15c5f3ed77 1979 Volkswagen T3 Front Lower Grille Clip "Part-Nr.: 171853695A
Front Lower Grill Clip for VW-T3 Bus
Model can be changed at
https://openjscad.org" https://3dcarparts.org/library/1979/Volkswagen/T3/front-lower-grille-clip https://r2-upload.3dcarparts.workers.dev/file/parts/803307b9-28d7-4f89-8e55-9e15c5f3ed77/images/front-lower-grille-clip-1_1777962760105_464l1q.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1979/Volkswagen/T3/front-lower-grille-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f11412c8-de50-4b65-9982-c6bb059934bf 1998 Volkswagen Golf Back Door Handle Frame "Replacement parts for:
1J4 839 113 C
1J4 839 114 C
Fits the tweaker frames included in the JBL Stage 2 604 C set, and a 3B0 959 855 B switch.
This is a difficult geometry part, so not all features are the same, and might not be the perfect fit.
I printed the one in the pics with the following settings:
Layer thickness: 0.18mm
Speed: 100mm/s
Support: Normal everywhere, lines pattern 5% density
5 lines brim
3 layer walls
5 bottom layer
4 top layer, no ironing
Infill 15% Tri-hexagon" https://3dcarparts.org/library/1998/Volkswagen/Golf/back-door-handle-frame https://r2-upload.3dcarparts.workers.dev/file/parts/f11412c8-de50-4b65-9982-c6bb059934bf/images/back-door-handle-frame-1_1777962679669_f5vvh8.jpg in_stock 18.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Volkswagen/Golf/back-door-handle-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fbf3efdb-5bd7-4745-a5d9-7e05326a6be6 1998 VW / Audi / Seat Multiple Trunk Storage Door Handle Knob "VW / Audi Locking Latch - Original latch for trunk lining
Part No. / Part Number: 1J0 867 468 B41
VW Bora Sedan 1999 - 2005
VW Caddy 2004 -
VW Golf Cabriolet 2012 -
VW Golf 4 Sedan 1998 - 2002
VW Golf 5 Sedan 2003 - 2006
VW Golf 5 Variant 2007 - 2009
VW Golf 6 Variant 2010 - 2014
VW Golf 7 Variant 2014 -
VW Jetta A5 (1K) 2006 - 2010
VW Passat 3C B6 Sedan / Variant 2006 - 2011
VW Passat 3C B7 Sedan / Variant 2011 - 2015
VW Sharan 7N 2011 -
VW Tiguan 5N 2008 - 2015
VW Touran 2006 - 2010
Audi A5 / S5 Sportback 2008 - 18.10.2010
Audi Q7 4L 2007 - 2015
Seat Alhambra 2011 -" https://3dcarparts.org/library/1998/VW%20%2F%20Audi%20%2F%20Seat/Multiple/trunk-storage-door-handle-knob https://r2-upload.3dcarparts.workers.dev/file/parts/fbf3efdb-5bd7-4745-a5d9-7e05326a6be6/images/trunk-storage-door-handle-knob-1_1777962672227_oawl5j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/VW%20%2F%20Audi%20%2F%20Seat/Multiple/trunk-storage-door-handle-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2acb4055-ebf0-4072-82dc-fd67543df954 1991 Volkswagen Golf Window Regulator Cable Holder Clip "Window regulator cable holder clip for VW, which happens to be quite often broken in older vehicles...
Design is done based on the the left side, apparently you just need to mirror the object to get the opposite one I didn't and it still works, just rotated it upside down as it really doesn't matter at least in my Golf Mk3.
OEM: 1H0837498 /1H0837497" https://3dcarparts.org/library/1991/Volkswagen/Golf/window-regulator-cable-holder-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2acb4055-ebf0-4072-82dc-fd67543df954/images/window-regulator-cable-holder-clip-1_1777962668335_d6gjnf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Volkswagen/Golf/window-regulator-cable-holder-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9c3afc72-f7e4-42fb-b029-b9b4835928ba 1997 Volkswagen Golf Retaining Strap for Rear Parcel Shelf Tray "Attention: support material needed
Design updated 03/2015" https://3dcarparts.org/library/1997/Volkswagen/Golf/retaining-strap-for-rear-parcel-shelf-tray https://r2-upload.3dcarparts.workers.dev/file/parts/9c3afc72-f7e4-42fb-b029-b9b4835928ba/images/retaining-strap-for-rear-parcel-shelf-tray-1_1777962663280_80w9dv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf/retaining-strap-for-rear-parcel-shelf-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-935c9315-87ce-4672-9e2c-384c5a838966 1997 Volkswagen Golf GTI Glove Box Handle "This is a glove box handle made by my friend Simonksi for his car: volskwagen golf gti 1997's. Jus in case the hadle breaks, here you have a replacement.
I've printed it without supports, so the letters at the front of the piece are not fully legible. However the model still works good." https://3dcarparts.org/library/1997/Volkswagen/Golf%20GTI/glove-box-handle https://r2-upload.3dcarparts.workers.dev/file/parts/935c9315-87ce-4672-9e2c-384c5a838966/images/glove-box-handle-1_1777962659632_jdnwux.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf%20GTI/glove-box-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-25118ace-fd84-4098-afd3-c5669faf1488 1997 Volkswagen Golf Passenger Front Floor Vent "VW Jetta Bora Golf MK4 Beetle Right Front Floor Vent, left this here so people can find it while googling.
My Golf mk4 didn't have a floor vent, so i made one. I don't know if its sizes are anything like the original, since I've never seen one, except on pictures.
Just for fun i also made a 2 colour version, which can be printed as 2 parts that snap together.
Edit: can confirm this also works for Audi A4 (b6)." https://3dcarparts.org/library/1997/Volkswagen/Golf/passenger-front-floor-vent https://r2-upload.3dcarparts.workers.dev/file/parts/25118ace-fd84-4098-afd3-c5669faf1488/images/passenger-front-floor-vent-1_1777962651253_orn494.jpg in_stock 9.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf/passenger-front-floor-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cab2b074-73ca-4a9d-92e8-b0c893b13169 1997 Volkswagen Golf License Plate Light Repair Clip "Quick and fast repair for a broken clip of the license plate illumination, for a VW Golf 4.
It's a tad to big, i included the step file so you can edit it yourself.
Also, since a car gets warm in summer, don't use PLA. PETG or ABS should be fine." https://3dcarparts.org/library/1997/Volkswagen/Golf/license-plate-light-repair-clip https://r2-upload.3dcarparts.workers.dev/file/parts/cab2b074-73ca-4a9d-92e8-b0c893b13169/images/license-plate-light-repair-clip-1_1777962411831_ekmbpp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1997/Volkswagen/Golf/license-plate-light-repair-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3cbaa14c-9b84-401c-bfe4-d5e59d6c2f25 2003 Volkswagen Caddy Sun Visor Clip "VW Caddy type 2K 2003 - Present models.
Replacement sun visor clip tested and works fine.
I made mine solid infill.
Feel free to tweak and remix to your liking." https://3dcarparts.org/library/2003/Volkswagen/Caddy/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3cbaa14c-9b84-401c-bfe4-d5e59d6c2f25/images/sun-visor-clip-1_1777962408660_5f0k36.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Volkswagen/Caddy/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5fe36fe1-c487-47f1-ba78-0895df5953b6 2003 Volkswagen Golf 52mm Gauge Holder "This Thing is an Gauge Holder for 52mm Gauges! so every common Aftermarket Gauge fits!
its specificly for the Golf MK5 Airoutlet on the left side (probably fits the right site too)
You just replace the original fins with this piece and you are ready to go.
Dont print it in PLA, ABS only!! because of the heat in the car on warm Summerdays PLA deforms." https://3dcarparts.org/library/2003/Volkswagen/Golf/52mm-gauge-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5fe36fe1-c487-47f1-ba78-0895df5953b6/images/52mm-gauge-holder-1_1777962404734_8a1g4f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Volkswagen/Golf/52mm-gauge-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7ec87695-dd7c-4366-81c4-6b3e75a77325 1983 VW Golf Small Moulding Front small molding for VW Golf MK2 without fastening https://3dcarparts.org/library/1983/VW/Golf/small-moulding https://r2-upload.3dcarparts.workers.dev/file/parts/7ec87695-dd7c-4366-81c4-6b3e75a77325/images/small-moulding-1_1777962401087_hsj1s3.jpg in_stock 15.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1983/VW/Golf/small-moulding?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13d8efce-0edd-4b28-b424-f231e4697505 1997 Volkswagen Golf Air Vent Spring Repair Clips "This is a quick fix for a loose passenger side air vent on a VW Golf mk4.
The air vent can feel loose, when for instance you've lost the tension spring. These small washers add a little bit of pressure on both sides, effectively eliminating the need for said spring.
print both left and right washer in PETG or ABS, since cars tend to get warm in summer." https://3dcarparts.org/library/1997/Volkswagen/Golf/air-vent-spring-repair-clips https://r2-upload.3dcarparts.workers.dev/file/parts/13d8efce-0edd-4b28-b424-f231e4697505/images/air-vent-spring-repair-clips-1_1777962395523_1crlcx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf/air-vent-spring-repair-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bdf644a5-f14e-4735-a7b9-afa208b4fc87 1991 Volkswagen Golf Front Grille Clip Repair "With this design you will be able to fix quite common broken clip problem with MK3 front grill (1HG6853655, 1H6853653C)
You definitely need to sand or iron out the layers with soldering iron to smooth the surface.
There is some extra thinkness on the model for that
I used 0.2mm layer and ASA to print as the grill was also made from ASA but ABS would do just fine also." https://3dcarparts.org/library/1991/Volkswagen/Golf/front-grille-clip-repair https://r2-upload.3dcarparts.workers.dev/file/parts/bdf644a5-f14e-4735-a7b9-afa208b4fc87/images/front-grille-clip-repair-1_1777962391345_g4sm2p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1991/Volkswagen/Golf/front-grille-clip-repair?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-283e27d0-4da9-421c-98f5-490fb33b853b 1974 Volkswagen Golf Vent Window Pivot Bearing Alternative construktion for VW Golf MK1 vent window pivot bearing. https://3dcarparts.org/library/1974/Volkswagen/Golf/vent-window-pivot-bearing-2 https://r2-upload.3dcarparts.workers.dev/file/parts/283e27d0-4da9-421c-98f5-490fb33b853b/images/vent-window-pivot-bearing-2-1_1777962387090_xcidxe.jpg in_stock 9.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1974/Volkswagen/Golf/vent-window-pivot-bearing-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb169e99-2f4d-45a0-a75e-360bed91915a 2012 Volkswagen Golf Rear Air Vent Knob a Rear Air Vent Knob (replacement) for a Volkswagen Golf 7 / Golf VII https://3dcarparts.org/library/2012/Volkswagen/Golf/rear-air-vent-knob https://r2-upload.3dcarparts.workers.dev/file/parts/bb169e99-2f4d-45a0-a75e-360bed91915a/images/rear-air-vent-knob-1_1777962383582_0l963z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Volkswagen/Golf/rear-air-vent-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-24360c31-8eaf-4761-a5a7-db843293ff1e 2000 Volkswagen Golf Middle Sun Visor "I created this bigger version of the Volkswagen Golf 4 middle sun visor because the original is way too small to properly block the sun.
Like the original, the replacement consists of two parts: a mounting plate and a folding screen.
Both parts should be printed with support. I recommend printing the mounting plate standing upright as shown in the stl visualization (using a brim or raft). This way the clip holding the screen will become stronger.
Pease note that the width of the screen is 275mm...
Different angles included in case you're having trouble with the ""Thingiview"" feature.
I believe the original part OEM is 3B0858555 and it should also replace the visor in Passat, Bora, Polo etc. with a construction year of around 2000." https://3dcarparts.org/library/2000/Volkswagen/Golf/middle-sun-visor https://r2-upload.3dcarparts.workers.dev/file/parts/24360c31-8eaf-4761-a5a7-db843293ff1e/images/middle-sun-visor-1_1777962371709_m7apfy.jpg in_stock 21.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Volkswagen/Golf/middle-sun-visor?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-62f9ae21-7d3a-43c5-b2f6-f0003a3dff03 1980 Volkswagen Vanagon Sun Visor Clip Sunvisor Clip for VW T3. https://3dcarparts.org/library/1980/Volkswagen/Vanagon/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/62f9ae21-7d3a-43c5-b2f6-f0003a3dff03/images/sun-visor-clip-1_1777962367577_mqxcbh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1980/Volkswagen/Vanagon/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13d80c04-f0ac-460d-a004-a0d79df721d5 1983 Volkswagen Golf Door Speaker Adapter "Adapter for 5.25"" speaker using the space for the pockets in the door panel of late MK2s. No mods for the door panels needed except for making to small holes for the upper screws, so the pockets can easily be reinstalled at a later point. Fits both sides." https://3dcarparts.org/library/1983/Volkswagen/Golf/door-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/13d80c04-f0ac-460d-a004-a0d79df721d5/images/door-speaker-adapter-1_1777962364066_yklbzp.jpg in_stock 16.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/door-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5275929a-ac64-4060-95ee-8a146cebe08f 1999 Volkswagen Jetta/Golf Armrest Hinge "Remixed it so you don't need to mess with wood, just attach using middle mount screws.
Also changed geometry of one of the arms to fit better." https://3dcarparts.org/library/1999/Volkswagen/Jetta%2FGolf/armrest-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/5275929a-ac64-4060-95ee-8a146cebe08f/images/armrest-hinge-1_1777962359238_tjvm9y.jpg in_stock 12.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Jetta%2FGolf/armrest-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9e3eb2c0-6192-477c-83c6-21817177cc53 1990 Volkswagen Transporter Footboard Clip I simply copied one of the existing clips from my T4 and played around with the tolerances a bit. I printed in PLA only, cuz i ain't got no money for PA, but since the original one's are nylon, I'd suggest spending the extra money and getting some clips that work not only once, but maybe even twice. It worked for me, and I hope it will work for you too :D. https://3dcarparts.org/library/1990/Volkswagen/Transporter/footboard-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9e3eb2c0-6192-477c-83c6-21817177cc53/images/footboard-clip-1_1777962148080_y04hc1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1990/Volkswagen/Transporter/footboard-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-df044464-1ada-418c-8b83-05b69be9c78a 1968 Volkswagen Bus Sun Visor Clip This is a replacement sunvisor clip for my 1971 VW Bus. Looks very close to OEM. Works great. Probably works for all Type 1's, type 2' and type 3's from 1968-1972. https://3dcarparts.org/library/1968/Volkswagen/Bus/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/df044464-1ada-418c-8b83-05b69be9c78a/images/sun-visor-clip-1_1777962143223_p70hbm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1968/Volkswagen/Bus/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c4d9b187-a87e-43f8-b557-c9bd990addf2 1997 Volkswagen Golf Glove Box Handle "Replacement handle for the Volkswagen Golf MK3 glove box (here the 1997 Karmann Cabriolet)
This is the second version. It is functional but I am not happy with it aesthetically, so a new version will come when I have invested in a scanner." https://3dcarparts.org/library/1997/Volkswagen/Golf/glove-box-handle https://r2-upload.3dcarparts.workers.dev/file/parts/c4d9b187-a87e-43f8-b557-c9bd990addf2/images/glove-box-handle-1_1777962139262_gdn3v7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf/glove-box-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2420f327-6244-470c-acc8-57eafd32ecd4 2003 Volkswagen California Shelf Clip This is a replacement for the shelves clips in VW California T5 https://3dcarparts.org/library/2003/Volkswagen/California/shelf-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2420f327-6244-470c-acc8-57eafd32ecd4/images/shelf-clip-1_1777962135728_vri9qz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Volkswagen/California/shelf-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2d652b3-5549-4911-871d-eeb136507abc 1991 Volkswagen Golf Glove Box Handle "This is a glovebox handle for my previous car - that's why I don't have a photo of it.. It worked really well though.
I used to break an original handle every few weeks or months and decided to rather print a much stronger version myself than spend what was at the time R300-R450 (~$30) on a handle (2013). If you tried to open the glovebox while it was locked, I can guarantee that the original handle would break. This lasted me >6months and I eventually sold the car with the handle." https://3dcarparts.org/library/1991/Volkswagen/Golf/glove-box-handle https://r2-upload.3dcarparts.workers.dev/file/parts/b2d652b3-5549-4911-871d-eeb136507abc/images/glove-box-handle-1_1777962130965_mwkniq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Volkswagen/Golf/glove-box-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bd12c485-9a3d-4057-8e8c-6cf527b2aabe 2008 Volkswagen Golf Headliner Repair Trim "// Headliner / Roof liner repair trim to fix common VW Golf 6 issue with headliner separating //
Over time the headliner shrinks and seperates. Even after regluing the headliner you will have gaps around the original trim. This print will help cover that gap. Printed in PETG survied some quite hot summer days inside the car already without major deformation
_________________________________________
// VW Golf 6 cover to repair detaching headliner //
Over time the headliner fabric shrinks and detaches. Even after re-gluing, gaps remain around the original light unit cover. This additional cover helps to close the unsightly gaps. The PETG print has already survived some hot summer days in the car without major deformation." https://3dcarparts.org/library/2008/Volkswagen/Golf/headliner-repair-trim https://r2-upload.3dcarparts.workers.dev/file/parts/bd12c485-9a3d-4057-8e8c-6cf527b2aabe/images/headliner-repair-trim-1_1777962116594_k22shy.jpg in_stock 11.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Volkswagen/Golf/headliner-repair-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bcb5b91d-b345-427b-9578-94458e64e782 2015 Volkswagen Passat Charger Cable Clip "Print in 0.1mm layer height.
It is designed for a 3mm diameter cable.
In case of usage with a thinner cable, just scale it with your slicer.
I print it in PETG because of the better heat resistance.
Please give a like, if you like ;)
Please post the make, if you make ;)" https://3dcarparts.org/library/2015/Volkswagen/Passat/charger-cable-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bcb5b91d-b345-427b-9578-94458e64e782/images/charger-cable-clip-1_1777962111851_ma9v1f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Volkswagen/Passat/charger-cable-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d9ebe94-3e2a-4e46-babf-07c2bcdab5ee 1997 Volkswagen Golf Wheel Center Cap Suitable for vw golf 4. https://3dcarparts.org/library/1997/Volkswagen/Golf/wheel-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/4d9ebe94-3e2a-4e46-babf-07c2bcdab5ee/images/wheel-center-cap-1_1777962104946_bbo49w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Volkswagen/Golf/wheel-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c1108cdf-e28a-4836-833d-22b16575dd84 1983 Volkswagen Golf Heater slider control "Heater position slider
Hope it helps someone out when small parts like these become hard to come by
Check out my other MK2 golf replacement parts" https://3dcarparts.org/library/1983/Volkswagen/Golf/heater-slider-control https://r2-upload.3dcarparts.workers.dev/file/parts/c1108cdf-e28a-4836-833d-22b16575dd84/images/heater-slider-control-1_1777962101536_6b8y6m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/heater-slider-control?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-add693a1-28dd-4697-8bd9-a46ff42ecec1 1985 Volkswagen Golf / Jetta Sun Visor Clip "These are replacement visor clips, They have the standard quarter turn pin and use a stock screw. The part prints well although the photo shows a high speed test print.
On a MK 2 Jetta or Rabbit/Golf these clips seem to be broken. The parts are tougher than the standard part and are meant to be printed in the orientation that the STL file is orientated." https://3dcarparts.org/library/1985/Volkswagen/Golf%20%2F%20Jetta/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/add693a1-28dd-4697-8bd9-a46ff42ecec1/images/sun-visor-clip-1_1777962098009_8lh0r4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1985/Volkswagen/Golf%20%2F%20Jetta/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f2452344-5546-4147-9e61-e9029f3a9b29 1999 Volkswagen Jetta Floor Mat Clip This is the top side of the clip that fits onto the floor mat in an MK4 VW Jetta. It was missing from my wife's car so I designed a copy of it on Sketchup. https://3dcarparts.org/library/1999/Volkswagen/Jetta/floor-mat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f2452344-5546-4147-9e61-e9029f3a9b29/images/floor-mat-clip-1_1777962093612_4nifc0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Volkswagen/Jetta/floor-mat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-67ec31fd-473c-49e0-96d7-ca63bba5d9e4 2019 Mazda CX-3 Coin Tray Simple tray into the armrest for Mazda CX-3. Tested on 2019 model. Fit perfectly. Nothing special but works. https://3dcarparts.org/library/2019/Mazda/CX-3/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/67ec31fd-473c-49e0-96d7-ca63bba5d9e4/images/coin-tray-1_1777961702615_ag4ia7.jpg in_stock 10.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Mazda/CX-3/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c29c6bb5-e4ca-4181-876e-40292cb5b16f 2003 Mazda Mazda3 Cup Holder Insert "An insert for the central console of a first (BK) generation of Mazda3 which allows smaller cups to be held securely. The original cup holder is not suitable for anything else than cups, because the side of the cup holder does open to the internals of the interior when the top is closed. Then things can (and will) slip away into the mechanism (close by is the handbrake mechanism so it's not safe). With this insert/spacer it's safe to put coins/tokens, keys and small items into the cupholder and closing it without a worry.
Because the insert has a pretty big stable base, this variant (feel free ask for different dimensions, or take the sources) will fit only from a side, so it has to be installed when the cupholder mechanism is taken out from the center console, however taking it out takes about a minute. And then the inserts hole has to be put first into the center separator notch between the 2 cup holes and only when the whole body is twisted inside, then rotate it into it's possition.
https://youtu.be/GbquppsiCZg" https://3dcarparts.org/library/2003/Mazda/Mazda3/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/c29c6bb5-e4ca-4181-876e-40292cb5b16f/images/cup-holder-insert-1_1777961697957_cq3kp2.jpg in_stock 17.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Mazda/Mazda3/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e41f0a8b-c83b-43af-87a8-b1b02669881c 2009 Mazda 3 Speaker Ring "This plan was made for my mazda 3.
Converter from OEM mazda speaker 6.5 ""in size.
Up to layer 46 0.3000 mm layer height, fill 15% and 2 lines shell, from layer 47 0.2000 mm layer height and 30% fill and 4 lines shell ." https://3dcarparts.org/library/2009/Mazda/3/speaker-ring https://r2-upload.3dcarparts.workers.dev/file/parts/e41f0a8b-c83b-43af-87a8-b1b02669881c/images/speaker-ring-1_1777961694257_jaed8s.jpg in_stock 29.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Mazda/3/speaker-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d4cd0ed6-41e6-44ab-9585-8ef77e31aebe 2015 Mazda 3 Tweeter Adapter I created this tweeter adapter in order to install my Focal Flax tweeters and am giving back to the community hoping this helps someone as other projects have helped me in the past.I printed with 20%or 40%? infill with a 0.45 tip and 2mm filament. For a tweeter adapter it is very strong. Should accommodate most brands and sizes of tweeters. This was for a 2015 Mazda 3 but should fit a few years. https://3dcarparts.org/library/2015/Mazda/3/tweeter-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/d4cd0ed6-41e6-44ab-9585-8ef77e31aebe/images/tweeter-adapter-1_1777961690215_ze76zj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Mazda/3/tweeter-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ead47c53-4124-4514-bd6c-1364b05e0e53 2007 Mazda Mazda3 Key Fob Case "This is a replacement key fob case for the 2007 Mazda3. Likely works for key fobs made for similar generation vehicles around the same time frame. Use with all internals of fob, this print requires the rubber gasket/buttons. Print ""Button Test Plate"" to test if button configuration fits.
To Print the Fob
Print two ""Button Side Latch"", print one of everything else.
Also attached is the Prusa Slicer file with settings I used to print.
PLA. 0.2mm Layers. 100% Infill. Supports with 55 deg overhang threshold. Brim required around latch pieces. Print time 2 hours and change with my settings.
**DO NOT LEAVE IN SUN / HOT CAR / TEA KETTLE IF MADE WITH PLA**
**UNTESTED IN ANY OTHER MATERIAL. PETG COMPATIBLE FILES IN PROGRESS**
The side latches are symmetrical. Just click them in. The front latch has a short latch and a long latch. Orient with long latch on top.
You may need to sand some parts to fit. There is a gap between the top and bottom parts of the case I am working to resolve." https://3dcarparts.org/library/2007/Mazda/Mazda3/key-fob-case https://r2-upload.3dcarparts.workers.dev/file/parts/ead47c53-4124-4514-bd6c-1364b05e0e53/images/key-fob-case-1_1777961678784_ioe4dt.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2007/Mazda/Mazda3/key-fob-case?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1fd49e16-4ce3-4cc8-b24b-1c2a94602159 2017 Mazda Mazda3 Seat Trim Clip This is a retainer clip for a 2017 Mazda 3 https://3dcarparts.org/library/2017/Mazda/Mazda3/seat-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/1fd49e16-4ce3-4cc8-b24b-1c2a94602159/images/seat-trim-clip-1_1777961674340_9iomhi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Mazda/Mazda3/seat-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8739f8ea-d797-4451-9cf3-c64f8f6d70c1 2011 Mazda 3 Cabin Light Toggle Button "Replacement toggle buttons for the forward overhead cabin lights. Tested with 2011 Mazda 3.
The mesh naming assumes a left-hand drive vehicle.
Print with the flat face on the build plate, no supports.
If the button sticks when installed, toggling it several times may loosen it up." https://3dcarparts.org/library/2011/Mazda/3/cabin-light-toggle-button https://r2-upload.3dcarparts.workers.dev/file/parts/8739f8ea-d797-4451-9cf3-c64f8f6d70c1/images/cabin-light-toggle-button-1_1777961669043_lto8iu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Mazda/3/cabin-light-toggle-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fc2e2dfe-8430-4a37-a5d8-3713a380fdad 2009 Renault Scenic Rear Sunshade Clip Clip for the rear sun visor of the Renault Scenic 3. I had tested several models on Thingiverse but unfortunately they were unusable. Mine works perfectly. https://3dcarparts.org/library/2009/Renault/Scenic/rear-sunshade-clip https://r2-upload.3dcarparts.workers.dev/file/parts/fc2e2dfe-8430-4a37-a5d8-3713a380fdad/images/rear-sunshade-clip-1_1777961549424_vgsakj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Renault/Scenic/rear-sunshade-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-22700858-15d4-41fa-af42-21bbc6030801 2019 Mazda 3 Phone Holder This a phone holder designed to hang from the passenger side of the center console. The current dimension fit an iPhone 12 Pro very well, but the height can be adjusted in the slicer if needed. https://3dcarparts.org/library/2019/Mazda/3/phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/22700858-15d4-41fa-af42-21bbc6030801/images/phone-holder-1_1777961546033_akw7ob.jpg in_stock 26.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Mazda/3/phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5dae0ec0-ca3b-4718-b837-65332b63cf45 1997 Volkswagen Golf Trunk Cover Clip Clip for the trunk cover of a VW Golf 4. https://3dcarparts.org/library/1997/Volkswagen/Golf/trunk-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5dae0ec0-ca3b-4718-b837-65332b63cf45/images/trunk-cover-clip-1_1777961542731_i0ojro.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf/trunk-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c5462ac-4d39-4000-bc9a-f57b13d77d15 1998 Volkswagen Golf Hood Release Lever Clip "I designed this as a replacement for a friends VW Golf IV.
http://www.partscats.info/volkswagen/de/?i=cat_vag_models&brand=vw&number=1714&set=1718&ein=2001&f=203&hauptgr=1234567890&hg=8&grf=082310203&bf=82310&hgug=823&ug=23&parent_id=1015689" https://3dcarparts.org/library/1998/Volkswagen/Golf/hood-release-lever-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2c5462ac-4d39-4000-bc9a-f57b13d77d15/images/hood-release-lever-clip-1_1777961539651_qmesy4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Volkswagen/Golf/hood-release-lever-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2707320-0ce7-4782-9f94-867c5fcfe1cc 1967 Volkswagen Beetle / Super Beetle / Karmann Ghia / Type 3 / Type 4 Sun Visor Clip 67-78 Beetle 71-79 Super Beetle 68-74 Ghia 67-73 Type 3 70-74 Type 4 https://3dcarparts.org/library/1967/Volkswagen/Beetle%20%2F%20Super%20Beetle%20%2F%20Karmann%20Ghia%20%2F%20Type%203%20%2F%20Type%204/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b2707320-0ce7-4782-9f94-867c5fcfe1cc/images/sun-visor-clip-1_1777961532702_4iktu2.jpg in_stock 7.34 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1967/Volkswagen/Beetle%20%2F%20Super%20Beetle%20%2F%20Karmann%20Ghia%20%2F%20Type%203%20%2F%20Type%204/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-577817de-50f9-4d1c-8efc-edaee55f6e7f 1991 Volkswagen Golf Sun Visor Clip "I searched and searched for this.... searched here but theres no much things to golf mk3 so i went to the brand but couldn't finded, they stop making parts after 20 years of last production car. So I decided to design it. And here is it! I'll try to make more things. Hope to help more people like me. If you like it give me your like.
PS: This is a right seat side, if you need a drivers side just mirror." https://3dcarparts.org/library/1991/Volkswagen/Golf/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/577817de-50f9-4d1c-8efc-edaee55f6e7f/images/sun-visor-clip-1_1777961529069_ovo82h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Volkswagen/Golf/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7551f00f-9913-4c3c-a2ef-1ebf414b5ebe 1974 Volkswagen Golf Headlight Adjustment Clip Redesigned Clip for adjustable Headlights. https://3dcarparts.org/library/1974/Volkswagen/Golf/headlight-adjustment-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7551f00f-9913-4c3c-a2ef-1ebf414b5ebe/images/headlight-adjustment-clip-1_1777961525536_g91bjg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1974/Volkswagen/Golf/headlight-adjustment-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3cb7845a-f191-4a6e-8697-26e9657cb78b 1983 Volkswagen Golf Lock Button Made for replacing VW MK2 golf lock button https://3dcarparts.org/library/1983/Volkswagen/Golf/lock-button https://r2-upload.3dcarparts.workers.dev/file/parts/3cb7845a-f191-4a6e-8697-26e9657cb78b/images/lock-button-1_1777961521525_r63suw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/lock-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-77d1b76c-a267-418e-b72a-b03aea4964b3 1974 Volkswagen Golf Vent Window Pivot Bearing Pivot bearing for vent Window VW Golf MK1. https://3dcarparts.org/library/1974/Volkswagen/Golf/vent-window-pivot-bearing https://r2-upload.3dcarparts.workers.dev/file/parts/77d1b76c-a267-418e-b72a-b03aea4964b3/images/vent-window-pivot-bearing-1_1777961517860_mhrvg9.jpg in_stock 8.01 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1974/Volkswagen/Golf/vent-window-pivot-bearing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-85492be6-1c93-43de-bb02-8424d1025443 2015 Volkswagen Golf Air Conditioner Vent Outlet Tab Clip "After original broke, I was shocked that kind of small piece costs up to 70$ or on Aliexpress around 30$ - no way! For VW Golf 7 7.5 2016-2020 Center Console Air Conditioner Vent Outlet Tab Clip Trim Repair Kit
Few hours later ...
Here is the design that fits on my VW Golf MK7 2015.
It fits on driver, passenger, center console vent. On back side is smaller, when that breaks, I'll design that also.
Have fun engineering!
Your always welcome to pay me a small beer :D" https://3dcarparts.org/library/2015/Volkswagen/Golf/air-conditioner-vent-outlet-tab-clip https://r2-upload.3dcarparts.workers.dev/file/parts/85492be6-1c93-43de-bb02-8424d1025443/images/air-conditioner-vent-outlet-tab-clip-1_1777961514417_xp099s.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Volkswagen/Golf/air-conditioner-vent-outlet-tab-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1b785a72-49b1-42b5-bd1b-f37281369311 1991 Volkswagen Golf Sunvisor Clip "Much tanks to mco_martins here on Thingiverse for the original design! I was searching for something a little more cleaned up, and decided to just throw the original mesh in fusion and remix it to look a little more like the factory clips. I also added a small, blended countersink for the single screw.
Remodeled in Fusion 360, and an F3Z file is included.
As with the original file, this is a right seat side, if you need a drivers side just mirror it in your slicer!
**Thankfully, a member of the community notified me shortly after uploading that an error had occurred with my original STL file. This error has been fixed." https://3dcarparts.org/library/1991/Volkswagen/Golf/sunvisor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/1b785a72-49b1-42b5-bd1b-f37281369311/images/sunvisor-clip-1_1777961508065_nnpqa1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Volkswagen/Golf/sunvisor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-65b5ea57-fde6-46d3-b726-71644dce96cf 2005 Mazda 3 Visor Clip "Hey guys here is my remake of the visor clips used in the Mazda 3 (may suite other models too) i used the original to guage the dimentions and get the sizing correct. will need annealing if using PLA as the roof gets hot and can deform print.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hcUvcV12UPO" https://3dcarparts.org/library/2005/Mazda/3/visor-clip-2 https://r2-upload.3dcarparts.workers.dev/file/parts/65b5ea57-fde6-46d3-b726-71644dce96cf/images/visor-clip-2-1_1777961207940_kk0ssd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Mazda/3/visor-clip-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1e14854-5148-476f-9d99-89cc1a0198d2 2011 Mazda 3 Cabin Light Switch "Replacement switch for the forward cabin light switch, which can break off. Tested with 2011 Mazda 3.
Possible improvements: fit is just a little loose" https://3dcarparts.org/library/2011/Mazda/3/cabin-light-switch https://r2-upload.3dcarparts.workers.dev/file/parts/b1e14854-5148-476f-9d99-89cc1a0198d2/images/cabin-light-switch-1_1777961204166_nnf1e1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Mazda/3/cabin-light-switch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a9e21b9d-8cad-45d4-9dd2-882102e56236 1998 Mazda 121 Sun Visor Clip "The sun visor on my jellybean (98' mazda 121) broke so I designed a quick replacement, it fits quite firm but not too much so, if it's a little too tight for your liking you can heat it up with a heat gun and bend the hook up slightly, or just remix it. Hopefully this helps someone, may also fit other mazdas (or other cars).
I printed it in PLA which will hopfully not warp too much during summer, though I'm in Australia and the car is in direct sun (usually 40+ degrees in summer) and we're headed into summer so time will tell. If you're curious if PLA will hold up just leave a comment and I'll reply with how it went.
As I always do I included the step file and fusion file." https://3dcarparts.org/library/1998/Mazda/121/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/a9e21b9d-8cad-45d4-9dd2-882102e56236/images/sun-visor-clip-1_1777961198216_oqmzgt.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/121/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1402208-12ef-452c-9f99-511a1b4c0877 2009 Mazda 3 Center Console Insert Tray Mazda 3 BL center console insert tray https://3dcarparts.org/library/2009/Mazda/3/center-console-insert-tray https://r2-upload.3dcarparts.workers.dev/file/parts/b1402208-12ef-452c-9f99-511a1b4c0877/images/center-console-insert-tray-1_1777961194498_urjm4s.jpg in_stock 26.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Mazda/3/center-console-insert-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9e01b0ba-33ae-4875-90de-89f8a408e910 2006 Mazda 3 Interior Rear View Mirror Bracket "I encountered a problem with the mirror support on my Mazda 3 2006, it was broken where the part comes against the windscreen. After buying a second hand complete one on ebay, same problem... Apparently the design is too weak, so I made a new one. If it can be used for someone else, this one works very well and will be much more robust!
Update: Apparently works on Ford Fusion too!" https://3dcarparts.org/library/2006/Mazda/3/interior-rear-view-mirror-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/9e01b0ba-33ae-4875-90de-89f8a408e910/images/interior-rear-view-mirror-bracket-1_1777961190210_c7d6lw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2006/Mazda/3/interior-rear-view-mirror-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5c4c48d5-c8da-46e8-9f2b-79348638db03 2001 Mazda MX-5 Miata LED Foglight Adapter "Adapter to fit cheap LED foglights (aliexpress) to your miata.
Printed from PETG, 2mm walls, 25% zigzag infill and holds great." https://3dcarparts.org/library/2001/Mazda/MX-5%20Miata/led-foglight-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/5c4c48d5-c8da-46e8-9f2b-79348638db03/images/led-foglight-adapter-1_1777960681497_w4d8qa.jpg in_stock 22.46 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2001/Mazda/MX-5%20Miata/led-foglight-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ff7e9265-2550-4ce2-9359-273cfcee2b2e 2006 Mazda MX-5 Side Indicator Repeater Spacer "I bought a pair of aftermarket side indicator repeaters for my MX-5 but was unhappy with the fit so designed a spacer to reduce improve the seating and look. I printed mine in PETG with shells and top/base values to make them nearly solid.
Fitting instructions:
1) Put a smear of silicone sealant on each face and let it dry to improve grip and keep water out.
2) Remove existing repeaters by sliding in a credit card from the door side of the unit to release the clip and it will pull out.
3) Twist to remove the bulb holder and ensure it doesn't disappear into the car's wing.
4) Slip a printed spacer over the new repeater - Wide gap to the wider part of the repeater.
5) Insert the bulb holder into the repeater and clip it back into the car." https://3dcarparts.org/library/2006/Mazda/MX-5/side-indicator-repeater-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/ff7e9265-2550-4ce2-9359-273cfcee2b2e/images/side-indicator-repeater-spacer-1_1777960672641_pxficv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Mazda/MX-5/side-indicator-repeater-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-07d53a95-d233-4bad-b810-a7d34994f415 1979 Mazda RX-7 Windshield Trim Clip Since its dificult to get parts for such old cars https://3dcarparts.org/library/1979/Mazda/RX-7/windshield-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/07d53a95-d233-4bad-b810-a7d34994f415/images/windshield-trim-clip-1_1777960669086_4b5hpy.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1979/Mazda/RX-7/windshield-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0ce8d77b-95af-471c-80f9-fd0c8f3bfd94 2016 Mazda MX-5 Can Holder Insert "Do you like Red Bull? Do you have a Mazda MX5?
Tired of losing your can all over the car?
Here's the solution...
A can holder that fits our cup holder.
It's best to print it in PETG or ASA.
***********************************************************************
Do you like Red Bull? Do you have a Mazda MX5 ND?
Tired of losing your can all over the car?
Here's the solution...
A can holder that fits our cup holder.
Best to print it in PETG or ASA
" https://3dcarparts.org/library/2016/Mazda/MX-5/can-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/0ce8d77b-95af-471c-80f9-fd0c8f3bfd94/images/can-holder-insert-1_1777960664750_4t0cif.jpg in_stock 21.02 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Mazda/MX-5/can-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4046a629-fc91-4dd3-9ab6-a975943a0add 2016 Mazda MX-5 Cupholder Plug This is the Plug for the Cupholder MX-5 ND or Miata ND and also a second Version with thicker holders https://3dcarparts.org/library/2016/Mazda/MX-5/cupholder-plug https://r2-upload.3dcarparts.workers.dev/file/parts/4046a629-fc91-4dd3-9ab6-a975943a0add/images/cupholder-plug-1_1777960454407_n0za0d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Mazda/MX-5/cupholder-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9e5f8383-0b67-4e6f-ac7f-2c4ed44eab89 1989 Mazda Miata / MX-5 / Eunos Roadster Battery Fuse Support This part allows you to mount a fuse like the one shown on the picture. The whole assembly can be joined to the battery bracket using two zip ties. The fuse is holded in place by two screws. https://3dcarparts.org/library/1989/Mazda/Miata%20%2F%20MX-5%20%2F%20Eunos%20Roadster/battery-fuse-support https://r2-upload.3dcarparts.workers.dev/file/parts/9e5f8383-0b67-4e6f-ac7f-2c4ed44eab89/images/battery-fuse-support-1_1777960449980_mi76jp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1989/Mazda/Miata%20%2F%20MX-5%20%2F%20Eunos%20Roadster/battery-fuse-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6d05f98b-51a3-40df-9d79-40e8f64955fd 2016 Mazda MX-5 Stubby Antenna Adapter "suits the mini antenna in the picture- to make it more of a seamless fit on the car
Printed in PEGT will last 18 months in hot sun before it becomes fragile,
you can insert a o ring I/D 17.12 x O/D 22.36 into the bottom recess to stop vibration" https://3dcarparts.org/library/2016/Mazda/MX-5/stubby-antenna-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/6d05f98b-51a3-40df-9d79-40e8f64955fd/images/stubby-antenna-adapter-1_1777960444140_tqxlhn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Mazda/MX-5/stubby-antenna-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b9f4df6f-5702-4649-861b-d90dd7d561fe 2014 Mazda 6 Coin Tray "I really like my Mazda 6, but there is nowhere to put coins!! Now there is. It fits perfectly in the armrest. This is for a 2014, it may/may not fit on older/newer models (see UPDATE section below!), I have no idea. Probably better chance to fit in a newer model as the 2014 is the 1st year of the new model. I don't know if they changed the armrest or not after 2014. If you make one for a different model year, please give the result in the comments section (fit or not fit). Thanks!
UPDATE, MAY 17 2016: Also fits Mazda 3 2016, so maybe any Mazda from the new model. Let me know if you try it in a different model and I will add it here.
Thanks to ""tjbenator"" for the info." https://3dcarparts.org/library/2014/Mazda/6/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/b9f4df6f-5702-4649-861b-d90dd7d561fe/images/coin-tray-1_1777960438867_jnp14l.jpg in_stock 19.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Mazda/6/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-24b3d973-6661-49f0-abeb-70716b45d89b 2005 Mazda 3 Roof Rack Hole Plug I lost the decorative plugs that cover the holes where roof racks attach to my 2005 BK Mazda 3. I modelled the one OEM plug I hadn't lost and 3D printed it in FDM on a Markforge in carbon fibre Onyx. I'm sure it would work with other materials but try to make it UV stabalised in some way. Perhaps Painting it would do the trick? They fit well if not a little tight. They don’t have an arrow on the top surface like on the OEM version. They print well upside down with the large flat surface on the bed platform. https://3dcarparts.org/library/2005/Mazda/3/roof-rack-hole-plug https://r2-upload.3dcarparts.workers.dev/file/parts/24b3d973-6661-49f0-abeb-70716b45d89b/images/roof-rack-hole-plug-1_1777960433960_8cg881.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mazda/3/roof-rack-hole-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6a0d70b7-1c23-4461-b24a-89005c564e66 2013 Mazda 3 Cup Holder Organizer Organizer for cup holder space of the Mazda 3 2013-2016. https://3dcarparts.org/library/2013/Mazda/3/cup-holder-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/6a0d70b7-1c23-4461-b24a-89005c564e66/images/cup-holder-organizer-1_1777960428434_522v1z.jpg in_stock 17.92 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Mazda/3/cup-holder-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-288c82d1-652a-4518-b6d0-5b468b5c8b17 2003 Mazda 3 Roof Rail Plug Mazda 3 railing attachment-plug :) 3 types..oryginal, minimum support and without a support from the visible side. https://3dcarparts.org/library/2003/Mazda/3/roof-rail-plug https://r2-upload.3dcarparts.workers.dev/file/parts/288c82d1-652a-4518-b6d0-5b468b5c8b17/images/roof-rail-plug-1_1777960421823_6gkajq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Mazda/3/roof-rail-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cc4720b8-92be-49db-8082-bedc0f2fbcd6 2014 Mazda 3 Air Vent Gauge Holder "I ordered the gauge here:
https://www.aliexpress.com/item/33048761777.html?
You can see more pictures here:
https://www.facebook.com/mazdaaxelatuning/posts/144755987063273
I used petg firstly but during summer it was deformed so I replaced it by resin print." https://3dcarparts.org/library/2014/Mazda/3/air-vent-gauge-holder https://r2-upload.3dcarparts.workers.dev/file/parts/cc4720b8-92be-49db-8082-bedc0f2fbcd6/images/air-vent-gauge-holder-1_1777960418128_sat73e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Mazda/3/air-vent-gauge-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f24feecb-8301-43c3-86e7-72bc96fae07b 2015 Mazda 3 Cell Phone Holder My Mazda didn't have a very good way to mount the phone for viewing maps during navigation. This is quick and simple mount to keep your phone from slipping around. I've included 3 different iterations of the design to contour to the console cubby better. https://3dcarparts.org/library/2015/Mazda/3/cell-phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/f24feecb-8301-43c3-86e7-72bc96fae07b/images/cell-phone-holder-1_1777960412213_wmplxb.jpg in_stock 22.22 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Mazda/3/cell-phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-55a90df6-33c1-44ba-a6a4-ae19854aa1ec 1989 Mazda MX-5 Window Switch Panel "Custom switch panel for Mazda MX-5 NA (four switches).
Remix of (Miata/MX5 Retro Switch by avoocado)" https://3dcarparts.org/library/1989/Mazda/MX-5/window-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/55a90df6-33c1-44ba-a6a4-ae19854aa1ec/images/window-switch-panel-1_1777959815520_pwy0ze.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5/window-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-202080e9-4fbb-4394-825e-d0e4532ced08 2006 Mazda MX-5 Interior Pocket "Better (deeper) interior pocket for Mazda MX5 NC / Mk3, with the mounts for phone charging cable.
Model don't have proper plastic locks and may have some mismatch in the size, but it works on my side and I am too lazy to improve it.
UPDATE 2025-10-23: another model added without cable holes." https://3dcarparts.org/library/2006/Mazda/MX-5/interior-pocket https://r2-upload.3dcarparts.workers.dev/file/parts/202080e9-4fbb-4394-825e-d0e4532ced08/images/interior-pocket-1_1777959760782_keum17.jpg in_stock 20.11 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Mazda/MX-5/interior-pocket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-973f44f5-57d9-4342-93c7-b74a06e7c52c 1989 Mazda MX-5 Miata Floor Mat Bracket "This is a bracket that keeps is place the OEM driver's side floor mat. Sometimes it gets lost but now you can print one easily for yourself in about 1h15min with 10grams of material.
It has a hinge inside that permits to rotate the little blocker on top, just like the OEM thing, but you still need an ordinary clip to fix it to the ground, in the hole under the seat.
I think PLA will do the trick here but you are free to experiment with other materials." https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/floor-mat-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/973f44f5-57d9-4342-93c7-b74a06e7c52c/images/floor-mat-bracket-1_1777959748157_ve6sb0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/floor-mat-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2af2c9f2-caa9-4adf-82df-6ccaf1adbe18 1998 Mazda MX-5 Center Console Lid Hinge "Replacement hinge for Mazda MX-5.
Plan on using a cut rivet as shown in the photos." https://3dcarparts.org/library/1998/Mazda/MX-5/center-console-lid-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/2af2c9f2-caa9-4adf-82df-6ccaf1adbe18/images/center-console-lid-hinge-1_1777959742745_6y4t8m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5/center-console-lid-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ecc8f801-8b6e-4960-b37a-ef68574dea87 2001 Mazda MX-5 Dashboard USB Charging Module Inlay "Simple Inlay for hosting 2 USB Charging Modules of type MH-KC24.
Best prints on forward face down, no supports, no raft.
Printed in PLA and PETG, both came out fine.
The holes in the sides are for gluegun access to glue the USB Modules in place. The module itself is a press-fit into the original MX5 Dashboard.
Pictures and fit for MX5 NBFL, a.k.a. Miate MK 2,5. Dashboard fittet at least between 2001 and 2005." https://3dcarparts.org/library/2001/Mazda/MX-5/dashboard-usb-charging-module-inlay https://r2-upload.3dcarparts.workers.dev/file/parts/ecc8f801-8b6e-4960-b37a-ef68574dea87/images/dashboard-usb-charging-module-inlay-1_1777959738954_7xwrqo.jpg in_stock 8.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mazda/MX-5/dashboard-usb-charging-module-inlay?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b9110ec0-17a0-4236-902d-3ecbe2051857 1998 Mazda MX-5 Miata Phone Mount "A neat way to mount a smartphone.
Flat magnetic mount + 2x3mm screws required.
Print in ABS or other heat resistant material." https://3dcarparts.org/library/1998/Mazda/MX-5%20Miata/phone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/b9110ec0-17a0-4236-902d-3ecbe2051857/images/phone-mount-1_1777959730772_35nq68.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5%20Miata/phone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0a1201a2-f1c2-4230-b1a1-7549f434c9eb 1998 Mazda MX-5 Speaker Mount "Mounting bracket to install 8"" speaker into the NB (mk2/ 2.5) MX-5. The bracket also has a little hood to divert any water that may get into the car to help protect your new speakers ;)
The mounting holes in the door already line up nicely with an 8"" speaker but I found the hole in the door wasn't large enough for the speaker to sit flush. The mount just raises the speaker slightly to allow it to be installed properly.
Also I had to sand down the speaker grill ribs in the door covers to get a nice fit." https://3dcarparts.org/library/1998/Mazda/MX-5/speaker-mount https://r2-upload.3dcarparts.workers.dev/file/parts/0a1201a2-f1c2-4230-b1a1-7549f434c9eb/images/speaker-mount-1_1777959726509_fhfkjs.jpg in_stock 16.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5/speaker-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9991675b-fe37-4ef1-9bcc-bbaeaa049283 2016 Mazda MX-5 Passenger Side Cup Holder Storage Insert enlarged version of cup holder storage with a slot added for phone cable https://3dcarparts.org/library/2016/Mazda/MX-5/passenger-side-cup-holder-storage-insert https://r2-upload.3dcarparts.workers.dev/file/parts/9991675b-fe37-4ef1-9bcc-bbaeaa049283/images/passenger-side-cup-holder-storage-insert-1_1777959717418_46op3n.jpg in_stock 11.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Mazda/MX-5/passenger-side-cup-holder-storage-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-38235fa0-2738-4ffe-89f7-2e669e7190ca 2006 Mazda MX-5 Miata Boot Trim and Reversing Camera Mount "I replicated the blank piece of trim on the boot of my NC that contains the keyless entry sensor on some later models.
I've included the blank piece so that you can add your own camera mount. It clips in-place just like the original but you may find it hard to remove without breaking the print if you've used PLA.
There's a second file containing the mount that I used with a 'Car Rover CA009M' from Amazon - https://www.amazon.co.uk/dp/B013AUMV12/" https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/boot-trim-and-reversing-camera-mount https://r2-upload.3dcarparts.workers.dev/file/parts/38235fa0-2738-4ffe-89f7-2e669e7190ca/images/boot-trim-and-reversing-camera-mount-1_1777959712447_7jjort.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/boot-trim-and-reversing-camera-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1ca87621-47ea-4e4f-bb2c-73259eb35918 2006 Mazda MX-5 Antenna Replacement "3d printed antenna replacement for the Mazda Mx5 NC model
Not sure if it fits other models. Let me know if it does.
I 3d printed it with Markforge Mark Two and used Onyx as filament.
Enjoy!" https://3dcarparts.org/library/2006/Mazda/MX-5/antenna-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/1ca87621-47ea-4e4f-bb2c-73259eb35918/images/antenna-replacement-1_1777959708687_99ni1t.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Mazda/MX-5/antenna-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-44e6ab82-4aca-4be9-a78a-e7cdc310cc44 2015 Mazda MX-5 Storage Bin for Cup Holder Remixed design of a Storage Bin for the Mazda MX5 ND, that clips into the passenger side cup-holder slot. Reworked to fit RHD models, and also to address the spacing of the support on the original design. https://3dcarparts.org/library/2015/Mazda/MX-5/storage-bin-for-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/44e6ab82-4aca-4be9-a78a-e7cdc310cc44/images/storage-bin-for-cup-holder-1_1777959702767_q91t27.jpg in_stock 30.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Mazda/MX-5/storage-bin-for-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-efbfecc5-d7a5-4d4e-894d-b1494cd7fc4c 1989 Mazda MX-5 Under Bonnet Fuse Box Cover Under bonnet Fuse Box Cover for Mazda MX5 Mk1. As it was difficult to source a replacement part in South Africa, a part was designed o FreeCad and printed in PLA Ultra on a Creality 10s Pro printer. Printing time is approximately 4 hours and the part fits with no after-printing mods. https://3dcarparts.org/library/1989/Mazda/MX-5/under-bonnet-fuse-box-cover https://r2-upload.3dcarparts.workers.dev/file/parts/efbfecc5-d7a5-4d4e-894d-b1494cd7fc4c/images/under-bonnet-fuse-box-cover-1_1777959698042_k4wz67.jpg in_stock 10.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1989/Mazda/MX-5/under-bonnet-fuse-box-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5d5b29c3-e42b-4ef2-9752-51edbe7b4b68 2016 Mazda MX-5 Phone Holder "My very first upload, hope someone finds it useful.
This is a phone holder I designed for my friends Mazda MX-5, never really planned on uploading it, but he put up a picture of it online and someone asked for the files so I thought I might aswell drop it here for everyone. It also seems to double up nicely as a place to hang your air freshner.
Originally I wanted to make the phone tray adjustable so it can take a wider variety of phones, but was asked to make it slim and without moving parts to fit a Pocophone F1 in a case... don't you just hate when people meddle with your creative vision? At least I managed to smuggle through an easy to replace tray option.
I designed it around nuts and bolts that I had available and to make the assembled version look good, but the button head bolt can be replaced with a normal socket cap and it will still work fine.
The main joint between the mounting arm and swivel adaptor takes a M6x25mm button head and a M6 nylock nut, while the tilt joint uses a M6x18mm socket cap with a M6 nylock nut.
The phone tray takes two M4x6mm flat countersunk bolts, that screw directly into plastic and the bolts are 15mm apart (center to center), in case you want to make your own tray.
The piece of foam stuck to the side on the pictures is to dampen some rattle during driving, the holder is stiff when assembled, but the accessory port on the side of the central tunnel not so much.
I sliced it with Prusa Slic3r standard PETG settings, the swivel and tilt adaptors are 100% infill, while the main arm and phone tray were either 20 or 30% (can't remember exactly) and with modifiers for 100% infill around the bolt areas to prevent the plastic from caving in under the tension.
Printed it on my Prusa MK2.5 with some generic white PETG
Edit:
I added a LHD version of the main mount as it turns out the mounts on both sides of the car are not an exact mirror image and I also smoothed the sharp corners on that main bracket." https://3dcarparts.org/library/2016/Mazda/MX-5/phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5d5b29c3-e42b-4ef2-9752-51edbe7b4b68/images/phone-holder-1_1777959684564_f7vbma.jpg in_stock 23.22 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Mazda/MX-5/phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7266ed6d-ba92-494d-beec-15165e41e055 1998 Mazda MX-5 Radio Phone Mount "Phone holder/ mount for in a mazda mx5 nb/nbfl that uses the orginal radiocover for the minideck.
Needed:
5x M3x20 countersink screws
5x M3 nuts.
Lever arms must be screwed thight else the phone might drop out during epic cornering." https://3dcarparts.org/library/1998/Mazda/MX-5/radio-phone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/7266ed6d-ba92-494d-beec-15165e41e055/images/radio-phone-mount-1_1777959457048_27sv27.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5/radio-phone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fc4a4b7a-a93d-4cbb-b9bb-c64a6b5fe1a4 1998 Mazda MX-5 Quadlock Phone Mount Quadlock mount for MX5. Use double sided tape to stick it to the rings around the AC vents. You can still access the warning lights under the phone. https://3dcarparts.org/library/1998/Mazda/MX-5/quadlock-phone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/fc4a4b7a-a93d-4cbb-b9bb-c64a6b5fe1a4/images/quadlock-phone-mount-1_1777959451121_8ufab7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5/quadlock-phone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3fd8cc9d-0cf8-4ed8-b82e-366baefbe171 1998 Mazda MX-5 Phone Mount Vent Adapter "I was looking for an elegant way to install my phone mount. So I designed a part to replace one of the vent ""globes"". After 3D-printing the part I glued it in the original snap-ring en re-assembled everything with the original vent-tube. Happy with the result!" https://3dcarparts.org/library/1998/Mazda/MX-5/phone-mount-vent-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/3fd8cc9d-0cf8-4ed8-b82e-366baefbe171/images/phone-mount-vent-adapter-1_1777959447427_m3wtnw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5/phone-mount-vent-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e7aa29d5-4535-4224-9d2a-cb3a7b7bb744 2016 Mazda MX5 Miata Door Speaker Adapter Bracket "Adapter bracket for replacing the 6.5"" door speakers in an ND generation Mazda MX5. Fits the factory door mounting holes and hardware, should be compatible with many aftermarket 6.5"" speakers. I used JBL GTO620's as replacements. Speakers were mounted to the brackets using M4x20 hex cap machine screws and nuts, there are pockets in the bracket so the heads of the screws do not protrude and interfere with mounting. I also used foam between the bracket and door, and speaker and bracket, to minimize any coupled vibration. Printed with PLA, 30% infill. It is plenty rigid." https://3dcarparts.org/library/2016/Mazda/MX5%20Miata/door-speaker-adapter-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e7aa29d5-4535-4224-9d2a-cb3a7b7bb744/images/door-speaker-adapter-bracket-1_1777959442390_hz2rcm.jpg in_stock 21.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Mazda/MX5%20Miata/door-speaker-adapter-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6d54f9ca-3805-4a68-9cf5-85f488d1e3ac 1989 Mazda MX-5 Wiper Cap Cover "This is a replacement for a missing wiper cap cover on the Mazda MX-5 NA or NB.
Made using measurements from the original to match as close as possible." https://3dcarparts.org/library/1989/Mazda/MX-5/wiper-cap-cover https://r2-upload.3dcarparts.workers.dev/file/parts/6d54f9ca-3805-4a68-9cf5-85f488d1e3ac/images/wiper-cap-cover-1_1777959438861_eozye9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1989/Mazda/MX-5/wiper-cap-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2e70d3a5-0c20-4831-9770-d68c0d530b53 1989 Mazda MX-5 Miata Ashtray Lid "Hi, I made a replacement for the lid on the ashtray
It fits, feels and looks like the original
Black ABS recommended, but white PLA painted black works fine." https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/ashtray-lid https://r2-upload.3dcarparts.workers.dev/file/parts/2e70d3a5-0c20-4831-9770-d68c0d530b53/images/ashtray-lid-1_1777959434778_p6efgn.jpg in_stock 18.81 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/ashtray-lid?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54de8ee4-abf0-41d1-843b-6366850f7357 1998 Mazda MX-5 Car Stereo Trim I designed this stereo trim that fits over the stereo and flush with the mx5s trim. This trim is designed specially for the Kenwood DMX125DAB Stereo. It does require glue to stick to the car stereo and onto the cars trim. Feel free to adapt it to your stereo size or if you want I can design one for you. https://3dcarparts.org/library/1998/Mazda/MX-5/car-stereo-trim https://r2-upload.3dcarparts.workers.dev/file/parts/54de8ee4-abf0-41d1-843b-6366850f7357/images/car-stereo-trim-1_1777959431012_h6c8uz.jpg in_stock 13.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5/car-stereo-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9c3783e1-1146-4086-8885-c3a764715e8f 2005 Mazda MX-5 Front Bumper Tow Hook Cover 100% infill recommended, PETG, 250°C at least for good adhesion between the layers of the claws. https://3dcarparts.org/library/2005/Mazda/MX-5/front-bumper-tow-hook-cover https://r2-upload.3dcarparts.workers.dev/file/parts/9c3783e1-1146-4086-8885-c3a764715e8f/images/front-bumper-tow-hook-cover-1_1777959427065_sa82tr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mazda/MX-5/front-bumper-tow-hook-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e13b64b-3853-4abb-91f2-63cffee9d5bf 1998 Mazda MX-5 Fog Light Support Bracket "I designed this part to add a fog light to my Miata.
It fits for the Jeep Wrangler 4"" fog light with some small changes.
I got the fog light from Aliexpress
https://fr.aliexpress.com/item/1005004561080856.html?spm=a2g0o.productlist.0.0.72305c1b26BLKn&algo_pvid=dab0a16e-988b-4a46-9b1c-7451d920e0f8&algo_exp_id=dab0a16e-988b-4a46-9b1c-7451d920e0f8-10&pdp_ext_f=%7B%22sku_id%22%3A%2212000030307384996%22%7D&pdp_npi=2%40dis%21EUR%2168.12%2140.87%21%21%21%21%21%402100bdcf16688687911576538ea94e%2112000030307384996%21sea&curPageLogUid=TnrFNSfvDarM" https://3dcarparts.org/library/1998/Mazda/MX-5/fog-light-support-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/1e13b64b-3853-4abb-91f2-63cffee9d5bf/images/fog-light-support-bracket-1_1777959422840_yao959.jpg in_stock 18.01 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1998/Mazda/MX-5/fog-light-support-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5fbc73e5-3331-4955-ae45-4f42f40f2af3 2006 Mazda MX-5 Miata Floor Mat Holder "Holder for floor mat driver side Mazda NC MX-5, as pictured.
Assemble parts with 1x M4x12 hex bolt, make a small hole in the carpet and screw the holder into the carpet. Lay mat over holder and twist upper part to secure the mat.
Will work with other vehicles with the same type of mat." https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/floor-mat-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5fbc73e5-3331-4955-ae45-4f42f40f2af3/images/floor-mat-holder-1_1777959417585_0tgp04.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/floor-mat-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4b555a6d-c6b4-4243-898f-58119e7f9d9c 1998 Mazda MX-5 Vent Gauge Mount "This replaced the black plastic part of a vent from a mx 5 nb. The silver/black outer ring is to be kept and cliped black in, you may also want to use a bit of glue if its not sturdy enough.
If you plan on still using your heating i would recommend printing in something more temperature resistant, i printed in petg.
If you need help or want the Autodesk Inventor IPT u can write me a mail at linusgiwjorra@gmail.com" https://3dcarparts.org/library/1998/Mazda/MX-5/vent-gauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/4b555a6d-c6b4-4243-898f-58119e7f9d9c/images/vent-gauge-mount-1_1777959411250_jcm8h4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5/vent-gauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-99a3551f-b1c4-49de-b5ba-f741c95dfe65 1990 Mazda Miata Boot Light Switch Fitting miata boot light switch fitting. https://3dcarparts.org/library/1990/Mazda/Miata/boot-light-switch-fitting https://r2-upload.3dcarparts.workers.dev/file/parts/99a3551f-b1c4-49de-b5ba-f741c95dfe65/images/boot-light-switch-fitting-1_1777959019393_599fzn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1990/Mazda/Miata/boot-light-switch-fitting?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-96b6efec-003a-4f0f-858c-dd43b698d692 2006 Mazda MX-5 Miata Rear Speaker Bracket "Replace your factory rear 3.5"" speakers with Aftermarket speakers from Kicker, JL Audio, Rockford Fosgate, etc!
The factory speaker mount in the Miata is too small to accept the larger baskets/magnets of most aftermarket speakers, so I made a new one! This bolts right into the factory location, puts the speakers right where they need to be, and allows the plastic covers to go back in place without any obstructions. You may need to cut off a small metal piece on a tab just behind the driver side speaker to get it to fit perfectly (just depends on what aftermarket speakers you go with).
I recommend buying some 5 minute epoxy from Walmart for $5. After you're done printing, mix some up and using a cheap acid brush (or similar) apply it to the exterior of the piece to make it as strong as a plastic-injection part by the time you're done." https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/rear-speaker-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/96b6efec-003a-4f0f-858c-dd43b698d692/images/rear-speaker-bracket-1_1777959004423_2i3q1u.jpg in_stock 24.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/rear-speaker-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4a1b1e63-6279-4d9c-bd6f-0a70508fd6e3 1990 Mazda MX-5 Wideband Gauge Vent Mount "I made this design so I could fit my AEM Wideband O2 controller into one of my ""eye ball"" air vent inlets in my 2002 MX-5 NBFL. It is compatible with all MX-5s from 1990 to 2004, as far as I know these models had the same vent holes. I printed it on my Creality LD-002H SLA printer, with 85% support from baseplate.
I don't think, that this would be too good with an FDM printer, but I didn't try it.
If you find this model useful and is a help for you, consider leaving a tip of a few bucks, I would be very grateful.
For hungarians:
// If you see someone selling this for printing in Hungarian Mazda groups, I ask for a share, after all I was the one who modeled it :D //" https://3dcarparts.org/library/1990/Mazda/MX-5/wideband-gauge-vent-mount https://r2-upload.3dcarparts.workers.dev/file/parts/4a1b1e63-6279-4d9c-bd6f-0a70508fd6e3/images/wideband-gauge-vent-mount-1_1777959000191_11460d.jpg in_stock 12.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5/wideband-gauge-vent-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-87f7e8c3-c140-49f6-84b7-796faddfb5a0 1990 Mazda Miata Door Pull "Mazda Miata Soor Pull (NA)
Porsche-style door pulls for your NA Miata This is a snap-style cap and base that does not require any hardware to hold the cap.
Additional Resources needed:
Adding your color webbing strip for color personalization, the shortest length suggested is 14"" as you want enough material to create a loop of 6"" and an additional 2"" for 1"" overlaps for the eye loop to create a little webbing sandwich. Use a 7/8"" washer to help keep everything tight.
Use a hot knife or similar tool to create the holes needed in webbing. This will seal the webbing and prevent fraying.
2 ea 7/8"" flat washers
36"" of color webbing can be bought at most local craft stores
Print settings:
Use PETG or ABS or ASA or stronger material with better heat resistance.
Layer Height: 0.20mm base with variable layer height
Perimeters: 3
Infill: 15% Gyroid
Support: Required" https://3dcarparts.org/library/1990/Mazda/Miata/door-pull https://r2-upload.3dcarparts.workers.dev/file/parts/87f7e8c3-c140-49f6-84b7-796faddfb5a0/images/door-pull-1_1777958995567_5lt9q4.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/door-pull?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-016a1497-3107-4034-9468-ed1db16ffea6 1989 Mazda MX-5 Miata HVAC Duct Hose Adapter When i bought my Miata it was missing the pipe for the HVAC, so i decided to print adapters so i could use standard 102mm HVAC hose and hoseclamps. I used the standard plastic fasteners to attach it to the car. https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/hvac-duct-hose-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/016a1497-3107-4034-9468-ed1db16ffea6/images/hvac-duct-hose-adapter-1_1777958985798_7a6ih9.jpg in_stock 24.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/hvac-duct-hose-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3a5ce69d-3d91-4ef9-974b-b11c0ead7afa 1999 Mazda Miata Console Hinge I recommend using the .3mf files. This is a modified version of Binchotan's console hinge (https://www.thingiverse.com/thing:3883430). When I tried his design, it immediately broke due to how thin the walls of the hinge were. I thickened the walls, made the hinge holes bigger to accommodate an M3 screw, and added triangular supports, and now it works flawlessly. Here is a link to a detailed guide on how to install it: https://www.reddit.com/r/Miata/comments/twl0m2/heres_my_files_for_a_3dprinted_nb1_center_console/ https://3dcarparts.org/library/1999/Mazda/Miata/console-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/3a5ce69d-3d91-4ef9-974b-b11c0ead7afa/images/console-hinge-1_1777958978417_yo7ldk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Mazda/Miata/console-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-00737aff-92b5-4ac2-a3ba-578e333f501b 2005 Mazda 3 Visor Clip The plastic seems to get brittle from all the UV exposure on this plastic Visor clip. I 3D scanned and printed a new one for my Mazda 3 2005. https://3dcarparts.org/library/2005/Mazda/3/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/00737aff-92b5-4ac2-a3ba-578e333f501b/images/visor-clip-1_1777958967784_mw72n1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Mazda/3/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fb170e62-107e-4f28-aad2-1fb7bccdc280 1990 Mazda Miata Center Console Delete Cap "Slightly different from agerrebo's version.
It didn't fit exactly right but his dimensions were solid so I re-designed it from the stl and made changes so that it would fit better.
Changes from agerrebo's design:
- Extended back face that meets with tombstone by 2mm.
- Removed inside structural ribs
- Increase radius around side and top edges" https://3dcarparts.org/library/1990/Mazda/Miata/center-console-delete-cap-2 https://r2-upload.3dcarparts.workers.dev/file/parts/fb170e62-107e-4f28-aad2-1fb7bccdc280/images/center-console-delete-cap-2-1_1777958962767_tmt8wc.jpg in_stock 17.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/center-console-delete-cap-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ab7681e9-2f35-49cd-a1a4-c8cc7841e4e5 1990 Mazda Miata Radio Delete Gauge Panel Modified @uhlwoogi's original design so that it mounts flush to the tombstone and lays flat with the front of where the radio assembly was. https://3dcarparts.org/library/1990/Mazda/Miata/radio-delete-gauge-panel https://r2-upload.3dcarparts.workers.dev/file/parts/ab7681e9-2f35-49cd-a1a4-c8cc7841e4e5/images/radio-delete-gauge-panel-1_1777958956021_6vdff2.jpg in_stock 27.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/radio-delete-gauge-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-628c49c9-c363-4b0c-84e4-60c3c9b046e3 1998 Mazda MX-5 Miata USB trim plug panel "For aftermarket ECUs that have a USB cable to hook up to, this clean panel gets rid of the cord hanging around. Replaces one of the factory rectangular trim plugs so it's completely reversible. No holes, no cutting.
You will have to buy/custom make a female to female USB Type A, and male to male USB Type A cord.
The place I mounted mine had 28.5mm of depth to work with, if you have less then make the spacer part taller.
Note: Use ABS, not PLA. The interior temps will deform PLA." https://3dcarparts.org/library/1998/Mazda/MX-5%20Miata/usb-trim-plug-panel https://r2-upload.3dcarparts.workers.dev/file/parts/628c49c9-c363-4b0c-84e4-60c3c9b046e3/images/usb-trim-plug-panel-1_1777958946567_s3w4f9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5%20Miata/usb-trim-plug-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-37e74fcb-f35f-4ea7-94ee-30167c398f4d 2006 Mazda Miata Center Cubby Tray "Made a small storage bin for the center cubby in a 2010 Mazda Miata NC. Should fit all generations of this style Miata (2006-2015).
I have 2 versions, one with dividers, one empty." https://3dcarparts.org/library/2006/Mazda/Miata/center-cubby-tray https://r2-upload.3dcarparts.workers.dev/file/parts/37e74fcb-f35f-4ea7-94ee-30167c398f4d/images/center-cubby-tray-1_1777958724490_y1ag6f.jpg in_stock 26.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Mazda/Miata/center-cubby-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-333fac77-22fa-4760-9e40-0de83e0d651a 1990 Mazda MX-5 Miata Interior Door Handle "Inside door handle for Mazda MX-5 Miata (NA).
M4 Binding Screw, M4 x 6mm for the pivot pins." https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/interior-door-handle https://r2-upload.3dcarparts.workers.dev/file/parts/333fac77-22fa-4760-9e40-0de83e0d651a/images/interior-door-handle-1_1777958714926_57vir7.jpg in_stock 11.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/interior-door-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4e8920e0-bbcb-4950-be87-db566217eb72 1998 Mazda MX-5 Miata 1 DIN Radio Frame Radio holder that has space for gauges or other accessories. Snaps into place. https://3dcarparts.org/library/1998/Mazda/MX-5%20Miata/1-din-radio-frame https://r2-upload.3dcarparts.workers.dev/file/parts/4e8920e0-bbcb-4950-be87-db566217eb72/images/1-din-radio-frame-1_1777958709231_os59p0.jpg in_stock 23.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/MX-5%20Miata/1-din-radio-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-08adf778-acad-4667-83e5-33c1bda7015f 1990 Mazda MX-5 Miata Between-Seat Cup Holder Let me know if there is something to improve or do different :D https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/between-seat-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/08adf778-acad-4667-83e5-33c1bda7015f/images/between-seat-cup-holder-1_1777958700668_xnz2x8.jpg in_stock 67.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/between-seat-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1f70839-bf24-40b9-bb77-0362f7ee510e 1990 Mazda MX-5 Miata Air Vent Cup Holder "This is a cup holder made for NA & NB Miatas. I drink a lot of 16oz cans, which tend to spill everywhere inside the center console of my NB1. The cup holder is designed specifically for cans but you could fit some cups and bottles in too, or adapt the ring yourself to accommodate whatever you like.
I used a modified version of teejay187's four-spoke vent design for my vent piece. They've got a few other vent designs, a very cool race dash, and some other Miata related things. so go check out their page." https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/air-vent-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/b1f70839-bf24-40b9-bb77-0362f7ee510e/images/air-vent-cup-holder-1_1777958695235_bju0me.jpg in_stock 13.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/air-vent-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a6c7c2ca-ea86-4fab-96d2-1bf89af0d3b3 1989 Mazda MX-5 Miata Cup Holder "So you own a Mazda Miata / MX-5 / Eunos Roadster. Specifically a first generation NA. The best selling convertible in history and ultimately the best car to have ever existed. Congratulations!
You pull up to your local Cars & Coffee event. Everyone is in awe at your beautiful car. But there's one problem. You've lost your factory OEM cupholders, or if you're like me, live in a market where cupholders were never even an option. How are you supposed to go to Cars and Coffee with nowhere to put your coffee?! The factory ashtray is less than useful for storing coffee, or anything besides ash for that matter.
Here's my solution to this frustrating issue.
I've designed this from the ground up, taking inspiration from @bbeavis' version but starting from the ground up. This cup holder clips in perfectly, and doesn't rattle around AT ALL.
The cap inserts slot in nicely, and don't rattle either. Just the perfect amount of friction to stop them moving, but you can get your nail under the cap easily to pull it up.
I've designed this cup holder with 75mm diameter holes specifically for my 8oz KeepCup (no affiliation, but they are fantastic). At some point I'll add an insert to better hold a Red Bull can, and if there's interest I'm happy to add other versions with different diameter cup holes too.
Recommend printing in PETG/ABS and sanding & painting to give an OEM finish. The flat black Duplicolor Vinyl & Fabric spray cans are what I used and are near a perfect match to the OEM finish.
Designed to print both the cap and the body with no supports. Print face down." https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/cup-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/a6c7c2ca-ea86-4fab-96d2-1bf89af0d3b3/images/cup-holder-2-1_1777958689897_6ue66p.jpg in_stock 10.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/cup-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fa357712-6e13-4c15-bbf3-51a381e518a8 2000 Mazda MX-5 Miata Arm Rest Cup Holder "**Printer brand:** Sovol
**Printer:** Sovol SV08
**Resolution:** 0.25 mm layer height
**Infill:** 50 percent gyroid
**Filament:** Sovol PETG
**Nozzle temperature:** 255 C
**Bed temperature:** 80 C
**Supports:** Yes, on build plate only
**Rafts:** No
Printed on a Sovol SV08 in Sovol PETG. I have a 2000 NB Miata and really liked the original design, so I remixed it to fit the NB. The keyhole for the retaining clip sits a little high on my console, so I used a strip of the hook side of hook and loop tape to keep it snug and firmly in place." https://3dcarparts.org/library/2000/Mazda/MX-5%20Miata/arm-rest-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/fa357712-6e13-4c15-bbf3-51a381e518a8/images/arm-rest-cup-holder-1_1777958683093_kruu2i.jpg in_stock 42.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Mazda/MX-5%20Miata/arm-rest-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-801b80f2-aae9-44a1-8da6-075d16927195 2001 Mazda MX-5 Miata Front License Plate Holder "Here is a license plate holder for the MX-5 NB FL.
I think it also fits the NB.
There are two ways to mount the holder.
1. By screw through the bumper.
2. By magnet. For this you can glue magnets with a diameter of 15mm and a height of 5mm into the recesses. Then glue the magnets inside the bumper as well. After that the holder should hold by magnet and be removable again. I have not tested this version yet. But I am happy about feedback.
If you want to modify the holder, feel free to do so. For this case I have also uploaded an STP file :)
Material: PLA
Nozzle: 0.4mm
Wall thickness: 2 lines
Layer thickness: 0.3mm
Infill: 15%
Support: Yes (for the holes)" https://3dcarparts.org/library/2001/Mazda/MX-5%20Miata/front-license-plate-holder https://r2-upload.3dcarparts.workers.dev/file/parts/801b80f2-aae9-44a1-8da6-075d16927195/images/front-license-plate-holder-1_1777958677523_ako9t0.jpg in_stock 17.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Mazda/MX-5%20Miata/front-license-plate-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6518db20-71a3-4944-802e-dd4c34a861bd 1990 Mazda Miata Tombstone Side Plug This is a slightly thicker version of the plugs that are on the sides of the tombstone on a miata. I have an NA miata and it worked perfect. https://3dcarparts.org/library/1990/Mazda/Miata/tombstone-side-plug https://r2-upload.3dcarparts.workers.dev/file/parts/6518db20-71a3-4944-802e-dd4c34a861bd/images/tombstone-side-plug-1_1777958673285_yimigl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/tombstone-side-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6dac176e-722a-4ed1-9a3d-f960d3d72c3d 1990 Mazda MX-5 Miata Turn Signal Return Ring Model of turn signal return ring Under the steering wheel of mk1 mx5 https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/turn-signal-return-ring https://r2-upload.3dcarparts.workers.dev/file/parts/6dac176e-722a-4ed1-9a3d-f960d3d72c3d/images/turn-signal-return-ring-1_1777958669164_9g0sw2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/turn-signal-return-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0fa35090-dd9d-4bc2-91ef-2dac6468cd3e 1991 Mazda 626 Hood Gasket Clip "I want it for a new car hood. The original parts can´t be removed from old hood, because the clip´s break.
Original Mazda clip cost >2€.
For Mazda Replaces: J001-56-741
Can be used in Mazda 626 GE (1991-1996), MX6,..." https://3dcarparts.org/library/1991/Mazda/626/hood-gasket-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0fa35090-dd9d-4bc2-91ef-2dac6468cd3e/images/hood-gasket-clip-1_1777958661346_0278ap.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1991/Mazda/626/hood-gasket-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fd884b8a-7c21-4615-bf9c-80bdd4b7d306 1991 Mazda Miata Cup Holder "This fits into the panel holes on a gutted 1991 Mazda Miata. I assume all the panels have these holes. Only works if you don't have carpet.
The print required a tiny amount of sanding for me so I bumped the pin width down 1mm for each but I haven't tested it - hopefully you won't need to shave them down at all." https://3dcarparts.org/library/1991/Mazda/Miata/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/fd884b8a-7c21-4615-bf9c-80bdd4b7d306/images/cup-holder-1_1777958655880_zcakmf.jpg in_stock 39.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Mazda/Miata/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6d9303d9-35ea-484c-a856-5c9755aaf0da 1990 Mazda MX-5 Miata Cup Holder "A larger cupholder (3"" ID hole) made for the Mazda MX5 NA Miata cupholder support, originally made by 5tr3l0k. [Linked here](https://www.thingiverse.com/thing:2501911)
EDIT: 3"" ID is perfect. 3.25"" is too large.
~~I'm currently still working on this design, so the ID may change a little in the near future. I'm thinking it may need to be 3.25"" or so to better fit large fast food style cups.~~
The connector piece was designed to be the same dimension as 5te3l0k's cup holder design. I simply added a fillet to the connector (to alleviate the stress in that area), changed the cut patterns, and increased the inner diameter.
As noted by 5tr3l0k, you should print this in ABS or similar material, but PLA should be fine if you don't leave it in a car in the summer. The glass transition temp for PLA is 140F (60C), so just be mindful of how you're storing it so it doesn't reach that temperature.
Included the .ipt for Inventor if you want to adjust any of the dimensions." https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/6d9303d9-35ea-484c-a856-5c9755aaf0da/images/cup-holder-1_1777958209242_d7s08m.jpg in_stock 13.24 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-19375bd0-15f6-4b10-a3db-aeade6894281 2006 Mazda MX-5 Sun Visor Sunglasses Mount Clip "Most sun visor sunglasses clips I found on here did not seem to work with the mx-5 Nc so I made my own, there is a big and a small one which depends on the thickness of your sunglasses arms to which one you might need. I've also included the blank STL with no sunglasses clip so if for some reason your pair of sunglasses don't fit in either the big or the small clip you can model your own to suit.
It is a tight fit but slides on to the visor from side. Would recommend printing on its side with a simple tree support for the clip part.
I used PLA but I can imagine in hotter weather it might deform so you might want to use PETG or ABS etc." https://3dcarparts.org/library/2006/Mazda/MX-5/sun-visor-sunglasses-mount-clip https://r2-upload.3dcarparts.workers.dev/file/parts/19375bd0-15f6-4b10-a3db-aeade6894281/images/sun-visor-sunglasses-mount-clip-1_1777958202317_r5aqdh.jpg in_stock 8.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Mazda/MX-5/sun-visor-sunglasses-mount-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e11064fe-898a-40ba-a8e7-c6fa23d1f9d8 2006 Mazda MX-5 Miata Antenna Cap "A cap to put in the hole left behind when you unscrew the factory radio antenna on various Mazda vehicles. I designed this to fit an NC model MX-5 Miata, but it will likely fit other vehicles as well.
The stem is just tight enough that you should have to twist it while inserting in order to get it seated correctly." https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/antenna-cap https://r2-upload.3dcarparts.workers.dev/file/parts/e11064fe-898a-40ba-a8e7-c6fa23d1f9d8/images/antenna-cap-1_1777958197946_ehu7u9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Mazda/MX-5%20Miata/antenna-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4b45686e-30da-4826-a72d-4b6ad83551ba 1998 Mazda 323F Roof Rack Drip Mould Cap Clip Mazda 323f Roof Rack Drip Mould Cap Clip BJ3D505A1C https://3dcarparts.org/library/1998/Mazda/323F/roof-rack-drip-mould-cap-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4b45686e-30da-4826-a72d-4b6ad83551ba/images/roof-rack-drip-mould-cap-clip-1_1777958192232_99d2wb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Mazda/323F/roof-rack-drip-mould-cap-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1ef74d06-fc9a-4970-896c-26d624443d44 1990 Mazda MX-5 Miata Windscreen Cowl Screw Cap "Part is a replacement for those small round screw caps on the windscreen cowl that seem to have a nasty habit of disappearing or getting damaged over the life of a vehicle. Should fit NA and NB models.
It shouldn't need as much force to install as the originals, and is equipped with a small notch to allow for easier removal by DIY orangutans.
Print instructions:
ABS
Align flat base to print bed
Keep your layers small (it prints quick, crank up the quality)
20% infill or more
Any fitment issues or suggestions, fire away!" https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/windscreen-cowl-screw-cap https://r2-upload.3dcarparts.workers.dev/file/parts/1ef74d06-fc9a-4970-896c-26d624443d44/images/windscreen-cowl-screw-cap-1_1777957962113_zvarsz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Mazda/MX-5%20Miata/windscreen-cowl-screw-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e9c08cdc-13e4-481f-9877-52555a247263 1998 Mazda Miata Console Screw Cover Just another missing trim piece on my Miata that I decided to design and print. This is a 2 piece washer and cap that clips onto the washer. https://3dcarparts.org/library/1998/Mazda/Miata/console-screw-cover https://r2-upload.3dcarparts.workers.dev/file/parts/e9c08cdc-13e4-481f-9877-52555a247263/images/console-screw-cover-1_1777957957953_30wyu4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Mazda/Miata/console-screw-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e3e34265-213c-483d-8e8c-fc1db271512a 1989 Mazda Miata Door Speaker Panel Clip "This is for my NA miata but will probably work on other models.
When I installed new speakers in my miata the speaker cover panel clips broke upon removal. I made this design to clip the cover panel back to the door.
It's not perfect because it's not designed to be removed so you will probably need to print more every time you want to take the cover off to install new speakers, but it does properly and securely hold the cover panel to the door.
Layer height doesn't matter, I used supports for mine but maybe your printer can do it without?" https://3dcarparts.org/library/1989/Mazda/Miata/door-speaker-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e3e34265-213c-483d-8e8c-fc1db271512a/images/door-speaker-panel-clip-1_1777957953964_vg5v2g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/Miata/door-speaker-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-03ec1f4f-2128-473f-8199-58fba83135aa 1990 Mazda Miata Under Radio Cubby "The pre 96 NA Miatas have a tombstone that is slightly larger than DIN, but at least in the case of my car, have a metal radio support try that is DIN sized. In an effort to have a better fitting part, and because I was too lazy to buy a bunch of cubbies and see what fits I designed and printed this.
Its 123mm tall, and 215 wide. I had to print diagonally on my printer, and the screw bosses needed supports. Nominal wall thickness is 2.5mm, I rocked 3 walls at .6mm thick so effectively its printed solid for the majority of the part. The screw holes are over sized and ovaled to allow for adjustment before tightening. The clearance for the screws is based around the OE screws on the Miata.
STEP and STL are included to make modification easier." https://3dcarparts.org/library/1990/Mazda/Miata/under-radio-cubby https://r2-upload.3dcarparts.workers.dev/file/parts/03ec1f4f-2128-473f-8199-58fba83135aa/images/under-radio-cubby-1_1777957948134_bhr1xz.jpg in_stock 28.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/under-radio-cubby?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b63da0d3-1abb-47f2-83d2-8b607e051973 1990 Mazda Miata Camshaft Seal Installer Set "####What is it?
These are tools to ease installation of new camshaft seals on Miata engines.
####How do I use it?
Print the part sturdily; I use around 30-40% infill with PLA.
Read the service manual for your car (you have one, right?) and follow the instructions to prepare the seal and bore. Place the tool against the seal, install the bolt, and slowly tighten to push the seal evenly into the bore.
Keep a close eye on the seal as it needs to go in straight. Due to printing tolerances, the driver can tilt while in use, so keep an eye all around the seal as you drive it. It can be used with gentle taps of a hammer as well to straighten things out if they become crooked.
**Warning!** This tool won't stop at the proper distance, it's up to you to make sure you only push the seal in until it's flush! Read the service manual!
####What's it for?
These tools should work on all 1.6L and 1.8L BP engines.
The shorter cam seal driver is for Exhaust cams on all ('90-'05) Miatae and Intake cams on non-VVT ('90-'00) models.
The longer VVT seal driver is for installing the VVT intake cam seal on applicable ('01-'05) models.
These installers will probably also work on other engines using the BP, like certain Ford Escorts and 1st gen Kia Sephias. Possibly other clones of the BP like the Kia T8D in 2nd gen Sephia/Spectras
####Anything else?
Basically, needed these tools since I'm rebuilding my NB2 engine and instead of buying some and waiting forever for them to arrive, decided to just make them using measurements from my engine and seals. I hope someone else finds them useful!
####Files:
STL: obvious
F3D: Fusion 360 source files, if you want to modify them." https://3dcarparts.org/library/1990/Mazda/Miata/camshaft-seal-installer-set https://r2-upload.3dcarparts.workers.dev/file/parts/b63da0d3-1abb-47f2-83d2-8b607e051973/images/camshaft-seal-installer-set-1_1777957430827_5cv3nd.jpg in_stock 19.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1990/Mazda/Miata/camshaft-seal-installer-set?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-480a9a14-513f-4e3a-b71a-07fa6ccbe330 1989 Mazda MX-5 Miata Parking Light Bulb Socket "HI!
I made a light bulb socket for the parking light in my MX5 NA
I wanted to save some money and started designing it. I wanted to use the ones on my friends car, but they were broken too. So it seems like this is rather a common problem. Maybe I can help" https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/parking-light-bulb-socket https://r2-upload.3dcarparts.workers.dev/file/parts/480a9a14-513f-4e3a-b71a-07fa6ccbe330/images/parking-light-bulb-socket-1_1777957427124_msyase.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/parking-light-bulb-socket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-08f4dae1-04cd-4e12-b5ff-4a528a374698 1990 Mazda Miata Armrest "This is a replacement armrest for the center console portion of an NA Mazda Miata. Mine cracked so I designed this to take its place. I never got it fully printed before I unfortunately had to let the Miata go. The fitment should be correct as both halves were printed and set in the car but never fully mounted together with the pegs. It is split into 2 pieces in order to fit my print bed on a Wanhao Duplicator I3. I was going to fit it together with the pegs and glue to two halves once fitment was verified.
I printed each half standing straight up with the split facing down onto the bed. I printed with supports. I recommend ABS as I'm not sure PLA or PETG would stand up to sitting in the heat of the sun in the car.
Good luck! I hope it fits. If it needs some tweaking just let me know and I can provide my model files. This was designed in Fusion 360." https://3dcarparts.org/library/1990/Mazda/Miata/armrest https://r2-upload.3dcarparts.workers.dev/file/parts/08f4dae1-04cd-4e12-b5ff-4a528a374698/images/armrest-1_1777957418023_vmy0fi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/armrest?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f0f64721-2ef7-4536-add9-2e520a300fbc 1989 Mazda MX-5 Soft Top Latch Button "Modified new version from Visser3. I had to file mine to fit so I made a modified version (also the Fusion 360 file is included)
printed in PLA and did not handle the heat" https://3dcarparts.org/library/1989/Mazda/MX-5/soft-top-latch-button https://r2-upload.3dcarparts.workers.dev/file/parts/f0f64721-2ef7-4536-add9-2e520a300fbc/images/soft-top-latch-button-1_1777957414403_jd1quc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5/soft-top-latch-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d5a73a9b-fd40-432a-a674-daf43c9b69db 1990 Mazda Miata Hood Trim "Trim part that i recreated from the scan of the other side, should fit nice as in the picture
Be careful, radiator hose to overflow may have to be relocated if not OEM (mine's OEM and has no fitting issue on OEM locations)
Hood has to be drilled, you could put rivnut insert in the hood and use screws to secure it, or drill it and use plastic trim clips as seen in the picture.
I would recommend printing it in PET-G or even ABS (mine's ABS and haven't moved at all after 1 whole year)" https://3dcarparts.org/library/1990/Mazda/Miata/hood-trim https://r2-upload.3dcarparts.workers.dev/file/parts/d5a73a9b-fd40-432a-a674-daf43c9b69db/images/hood-trim-1_1777957411011_3e6pmg.jpg in_stock 16.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Mazda/Miata/hood-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-779117a3-b8df-403a-a2dd-d950a68b8d65 1990 Mazda Miata Vent Ring Rings to go over the outside of the vent eyeballs on the Mazda Miata NA tombstone when using the Jeep Commander vents. https://3dcarparts.org/library/1990/Mazda/Miata/vent-ring https://r2-upload.3dcarparts.workers.dev/file/parts/779117a3-b8df-403a-a2dd-d950a68b8d65/images/vent-ring-1_1777957406774_bnovat.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/vent-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e0acaf62-0e55-4a76-90fe-146ec6d5aeb8 1989 Mazda MX-5 Miata Seat Recliner Lever "NOTE: Make sure to remove the support from the inside! It's a long and thin support. You can remove it with a toothpick by prodding it until it comes loose.
The file is set for the passenger seat as default. If you want the driver's side, just simply mirror it in Cura or whichever program you're using.
I stood it upright and printed it with supports." https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/seat-recliner-lever https://r2-upload.3dcarparts.workers.dev/file/parts/e0acaf62-0e55-4a76-90fe-146ec6d5aeb8/images/seat-recliner-lever-1_1777957403291_tpr3gu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/seat-recliner-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a34277ad-940b-4208-b5e3-5989a72645f7 1989 Mazda Miata Interior door handle cup "Hopefully this will help someone out. I broke mine and didn't see one on here already. This is for my NA Miata but I'm sure it could work with NB as well.
I printed this so the backside is on the bed. That way the part you see is much cleaner." https://3dcarparts.org/library/1989/Mazda/Miata/interior-door-handle-cup https://r2-upload.3dcarparts.workers.dev/file/parts/a34277ad-940b-4208-b5e3-5989a72645f7/images/interior-door-handle-cup-1_1777957396143_cp8zth.jpg in_stock 12.23 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/Miata/interior-door-handle-cup?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f9e3be51-5b72-47a4-ae77-6bda01da00dd 2006 Mazda MX-5 Windscreen Cowl Hole Cover "Windscreen Cowl Hole Cover for Mazda MX5 (Miata) Mk3/3.5/3.75 to replace theold brittle ones you broke when you removed the cowl to re-seal the scuttle grommets.
The visible side is the first print layer so aim to make that tidy for best appearance." https://3dcarparts.org/library/2006/Mazda/MX-5/windscreen-cowl-hole-cover https://r2-upload.3dcarparts.workers.dev/file/parts/f9e3be51-5b72-47a4-ae77-6bda01da00dd/images/windscreen-cowl-hole-cover-1_1777957386133_rs80xn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Mazda/MX-5/windscreen-cowl-hole-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-333eda0d-9ad7-4c12-8cc1-ac2c5afba50c 1990 Mazda MX-5 Dash Clip and Buttons A dash clip for the Mazda MX-5 NA, either to add tow buttons or to cover up the opening. https://3dcarparts.org/library/1990/Mazda/MX-5/dash-clip-and-buttons https://r2-upload.3dcarparts.workers.dev/file/parts/333eda0d-9ad7-4c12-8cc1-ac2c5afba50c/images/dash-clip-and-buttons-1_1777957380020_9cs7m3.jpg in_stock 7.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5/dash-clip-and-buttons?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d46c4613-59df-4cf5-93c5-ab045d85443b 2002 Honda CR-V Rear Window Wiper Bridge "This is a slide on trim piece for the rear window on a Honda CRV 2002-2005. This provide a smooth bridge for the wiper to pass over. Original Honda wiper blade carriers don't usually stick in the groove between the door and the glass, but aftermarket blade holders get stuck almost every time. This ""bridge"" solves this issue and protects your rear wiper from getting burnt out or broken and provides reliable rear window wiping." https://3dcarparts.org/library/2002/Honda/CR-V/rear-window-wiper-bridge https://r2-upload.3dcarparts.workers.dev/file/parts/d46c4613-59df-4cf5-93c5-ab045d85443b/images/rear-window-wiper-bridge-1_1777956732341_4bq9di.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Honda/CR-V/rear-window-wiper-bridge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7749d925-a549-451b-bf1f-6c75688124bb 2007 Honda CR-V Tailgate Internal Handle "This is an internal handle to open the hatch/lift-gate on all 3rd Gen Honda CR-Vs.
The stock 3rd gens lack an internal handle mechanism to open the vehicle while inside, but there is an access panel that lets you open the door manually if you are willing to stick your fingers or a tool into the door mechanism. I thought that was sketchy, so I designed a three piece print that engages the mechanism and allows you to open it without risking your fingers!" https://3dcarparts.org/library/2007/Honda/CR-V/tailgate-internal-handle https://r2-upload.3dcarparts.workers.dev/file/parts/7749d925-a549-451b-bf1f-6c75688124bb/images/tailgate-internal-handle-1_1777956725489_gpkg7q.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Honda/CR-V/tailgate-internal-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a2b5f027-7885-4252-936c-2f9fdf47604d 2006 Honda CR-V Cup Holder Insert "My CamelBak Forge drink bottle did not fit in the cup holders of my Honda CRV 2006, leading to it wobbling about all over the place and falling out.
This print inserts into the original cup holder in the centre console.
This can be printed in whatever filament you choose. I used PLA, and this has been very resilient for the past couple of years in a sub tropical climate. PLA has not deformed given the temperatures the inside of the car reaches in summer when closed up outside.
Supports are recommended when printing in the original orientation.
I applied some double sided tape to the base area, just to hold it down, as the grip exerted on the bottle may cause the print to come loose from the original mug holder.
See a video of it in action at https://youtu.be/TZePqxjwyjE" https://3dcarparts.org/library/2006/Honda/CR-V/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/a2b5f027-7885-4252-936c-2f9fdf47604d/images/cup-holder-insert-1_1777956721918_jd5114.jpg in_stock 27.12 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Honda/CR-V/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b7760947-c8e3-4e4a-8135-d8032c0f00d8 2002 Honda CR-V USB port cigarette lighter adapter "I recently converted my cigarette socket to a USB port for my 2nd gen Honda CRV to be used as an input for my wired Apple CarPlay on my Android Headunit.
Kindly scale/remix accordingly to your needs. It may need adjustments based on the USB port you choose to pair it with.
I've provided a couple of photos of the items that I've used in this modification.
Preferably, this part should be printed on ABS/ASA filament." https://3dcarparts.org/library/2002/Honda/CR-V/usb-port-cigarette-lighter-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/b7760947-c8e3-4e4a-8135-d8032c0f00d8/images/usb-port-cigarette-lighter-adapter-1_1777956716342_0knw1u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Honda/CR-V/usb-port-cigarette-lighter-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-604983b6-07c1-46d6-809c-bc3052a2fd70 2001 Honda CR-V Bonnet release cable handle "Replacement DIY part for my Honda CRV ( 2001 model ) bonnet release catch.
Modified design to include a ring for easy grip.
This part is a common fault that breaks. The replacement part fits over the remaining cable end. No need to trim back the remaining plastic. Add a little thick epoxy in the hole and press on to the cable end." https://3dcarparts.org/library/2001/Honda/CR-V/bonnet-release-cable-handle https://r2-upload.3dcarparts.workers.dev/file/parts/604983b6-07c1-46d6-809c-bc3052a2fd70/images/bonnet-release-cable-handle-1_1777956712073_gwn2q6.jpg in_stock 8.65 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Honda/CR-V/bonnet-release-cable-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-672eaed7-6ce7-40fc-bef7-030aba556112 2005 Honda CR-V Windshield Washer Reservoir Cap "EN: Windshield cleaner water cap replacement.
Print with TPU.
ES: Windshield cleaner water cap replacement.
Print with TPU." https://3dcarparts.org/library/2005/Honda/CR-V/windshield-washer-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/672eaed7-6ce7-40fc-bef7-030aba556112/images/windshield-washer-reservoir-cap-1_1777956708584_xcdmmw.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2005/Honda/CR-V/windshield-washer-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-75e788d3-e563-41cf-940f-921092eec7e6 2001 Honda CR-V Cupholder Insert "2001–2006 (2nd Generation) Honda CR-V cupholders were designed atrociously, holding neither small nor large cups well in attempt to accommodate for both in the same space. I designed this 3D printable insert that allows you hold smaller cups like coffee cups or small items more securely. Fits the inside diameter of the smaller cup size for the OEM design.
**Large Insert for HydroFlasks and Nalgene Bottles**: https://www.thingiverse.com/thing:4910619" https://3dcarparts.org/library/2001/Honda/CR-V/cupholder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/75e788d3-e563-41cf-940f-921092eec7e6/images/cupholder-insert-1_1777956705227_5jnzyu.jpg in_stock 20.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Honda/CR-V/cupholder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9b62f793-6480-4eb8-935f-7e3904126df2 2004 Honda CR-V Front Bumper License Plate Cap Insert "Missing one and decided to mirror it and replace both license plate caps
These can be installed with epoxy or caulk. I designed them to use rust proof 1-inch sheet-rock screws to spread the small plug. I ground the pointy tip off of the screw, just in case the bumper skin is pushed back far enough to touch the AC condenser... but if it ends up that far back you have bigger problems.
You might want to scale these down by 1% or 2% for a better fit... depending on the material and printer you use." https://3dcarparts.org/library/2004/Honda/CR-V/front-bumper-license-plate-cap-insert https://r2-upload.3dcarparts.workers.dev/file/parts/9b62f793-6480-4eb8-935f-7e3904126df2/images/front-bumper-license-plate-cap-insert-1_1777956499437_i2cub9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Honda/CR-V/front-bumper-license-plate-cap-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-165f3fa8-a19b-4053-8ae9-6b2d96b8d5f8 2008 Honda CR-V Taillight Mount Screw Cover "I made this rear taillights screw cover for my 2008 Honda CR-V to replace a broken screw cover.
I managed to model the part by measuring the original part and after a few tests I came up with a design that works." https://3dcarparts.org/library/2008/Honda/CR-V/taillight-mount-screw-cover https://r2-upload.3dcarparts.workers.dev/file/parts/165f3fa8-a19b-4053-8ae9-6b2d96b8d5f8/images/taillight-mount-screw-cover-1_1777956495602_3ftqux.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Honda/CR-V/taillight-mount-screw-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4355913b-c069-42a2-b5ce-6e1f89867dca 2005 Honda CR-V Washer Fluid Cap "The Washer fluid cap on my recently purchased 2005 Honda CRV was missing. They wanted $30 from the dealer for new one. Not happening.
It's printed with a nice blue TPU filament on my Monoprice Mini.
The larger stl file is an updated version that fits better. The first version fell off on me." https://3dcarparts.org/library/2005/Honda/CR-V/washer-fluid-cap https://r2-upload.3dcarparts.workers.dev/file/parts/4355913b-c069-42a2-b5ce-6e1f89867dca/images/washer-fluid-cap-1_1777956490570_096bx3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2005/Honda/CR-V/washer-fluid-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c2137406-70fc-48d9-b907-5eb370ab2d86 2025 Honda CR-V Front Console Organizer "This organizer allows more clearance than commercially available units so that a phone can be placed easily on the charging pad. There is also a separator which will prevent items on the right from getting on the pad.
Print in PETG or ABS for temperature resistance as the inside of a car can get very hot.
Use a bit of double-sided tape to attach it securely to the sides of the console." https://3dcarparts.org/library/2025/Honda/CR-V/front-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/c2137406-70fc-48d9-b907-5eb370ab2d86/images/front-console-organizer-1_1777956487112_gwt97l.jpg in_stock 16.91 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2025/Honda/CR-V/front-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8ed03c8c-c7ac-4acb-857b-2a7308210466 2012 Honda Civic Fuse Puller "Mini fuse puller for the engine compartment fuse cover of the 9th Generation Honda Civic (2012 to 2016).
I haven't tested it, but it will likely also work for the 8th Generation Honda Civic/CRV/HRV.
I printed it with 100% infill and using PETG filament, although PLA or ABS can also be used.
I made modifications to adapt it to the Honda, based on this other universal fuse puller:
https://www.thingiverse.com/thing:6983346" https://3dcarparts.org/library/2012/Honda/Civic/fuse-puller https://r2-upload.3dcarparts.workers.dev/file/parts/8ed03c8c-c7ac-4acb-857b-2a7308210466/images/fuse-puller-1_1777956483736_yfrcn3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2012/Honda/Civic/fuse-puller?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-05f87297-4f08-45de-ba7f-aaa3683272b6 1997 Honda CR-V Door Latch Clip I needed a part for my 1997 Honda CR-V because my door wouldn't open from the inside. The replacement part number is Honda Part 72136-SM4-003. I didn't want to pay the price that they were charging, so I made my own version. https://3dcarparts.org/library/1997/Honda/CR-V/door-latch-clip https://r2-upload.3dcarparts.workers.dev/file/parts/05f87297-4f08-45de-ba7f-aaa3683272b6/images/door-latch-clip-1_1777956480215_69h5ss.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Honda/CR-V/door-latch-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fa03df35-d6a4-446e-beed-0ddf548789bc 1989 Mazda MX-5 Miata Soft Top Latch Button Mazda Miata, MX5, Eunos Roadster (mk1 and mk2) soft top latch buttons. https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/soft-top-latch-button https://r2-upload.3dcarparts.workers.dev/file/parts/fa03df35-d6a4-446e-beed-0ddf548789bc/images/soft-top-latch-button-1_1777956476410_iirxjp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/soft-top-latch-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21896d8a-16cd-406e-9a5d-a6c89b4ea07f 1990 Mazda Miata Jack Handle Clip This is a replacement clip for a 1990 Mazda Miata (NA) trunk clip that secures one of the jack handle parts (see image). https://3dcarparts.org/library/1990/Mazda/Miata/jack-handle-clip https://r2-upload.3dcarparts.workers.dev/file/parts/21896d8a-16cd-406e-9a5d-a6c89b4ea07f/images/jack-handle-clip-1_1777956472555_160sgr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/jack-handle-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e2f1f05a-ee0a-4696-bde4-aa91d1c9d02d 1989 Mazda MX-5 Miata Cup Holder This im my design of a cup holder for a Mazda Mx5 NA. I once saw a similar design in a Youtube video but the guy didn't make his design public. So I made my own. It comes with custom support beam on the part that is screwed in. It is mounted on the side of the middle console with the screw that is already there. You should use ABS as filament so it doesnt melt in the sun. V2 of Cup Holder added, is a lot smoother. https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/e2f1f05a-ee0a-4696-bde4-aa91d1c9d02d/images/cup-holder-1_1777956460320_pq6n4u.jpg in_stock 7.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Mazda/MX-5%20Miata/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8b460e6b-157f-478f-a506-58d9d68ae05a 2013 Honda Odyssey Windshield Washer Bottle Cap "The original cap disintegrated over 10 years so I modeled a new one and printed it in PETG.
I had a terrible time trying to figure out what I'd need to order to be sure it would fit so this was actually much faster.
This is obviously not a Honda OEM part or design. If you happen to be a lawyer for Honda, try to dislodge your head from your colon before flagging this." https://3dcarparts.org/library/2013/Honda/Odyssey/windshield-washer-bottle-cap https://r2-upload.3dcarparts.workers.dev/file/parts/8b460e6b-157f-478f-a506-58d9d68ae05a/images/windshield-washer-bottle-cap-1_1777955871462_ewtwhc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2013/Honda/Odyssey/windshield-washer-bottle-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-88990da7-c233-4e4d-8828-d52d9828bd97 1999 Honda Acty Door Handle Mount Clip "At the time of disassembling the left door of my Honda Acty, I broke the door handle mount. I had to design for printing on a 3D printer.
Fit for Honda Acty Van (3rd generation). It maybe can also be fit for Honda Vamos and Vamos Hobio." https://3dcarparts.org/library/1999/Honda/Acty/door-handle-mount-clip https://r2-upload.3dcarparts.workers.dev/file/parts/88990da7-c233-4e4d-8828-d52d9828bd97/images/door-handle-mount-clip-1_1777955779737_1znxml.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Honda/Acty/door-handle-mount-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-426a9735-8c27-4dd5-a2a5-0a67d2cb9a3a 2002 Honda CR-V Rear Headrest Bag Hooks "This is a simple print to give you a couple extra places to hang your shopping bags for Honda CRV Second generation (2002–2006). It prints without support - I used PLA. Just take the headrest on the back seats out and it will slide over the metal poles.
Enjoy!" https://3dcarparts.org/library/2002/Honda/CR-V/rear-headrest-bag-hooks https://r2-upload.3dcarparts.workers.dev/file/parts/426a9735-8c27-4dd5-a2a5-0a67d2cb9a3a/images/rear-headrest-bag-hooks-1_1777955774994_9kxi4x.jpg in_stock 20.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Honda/CR-V/rear-headrest-bag-hooks?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7ae9d08a-0423-43c1-a014-57d4697fcb83 2008 Honda CR-V Speaker Mounting Adapter Frame to adapt 6-inch speaker for honda CRV 2008-2011 https://3dcarparts.org/library/2008/Honda/CR-V/speaker-mounting-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/7ae9d08a-0423-43c1-a014-57d4697fcb83/images/speaker-mounting-adapter-1_1777955771514_zl0i89.jpg in_stock 21.92 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Honda/CR-V/speaker-mounting-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-34f99bde-743a-42fd-9856-21080b867651 1999 Honda CR-V Hubcap Replacement hubcap for my Honda CRV https://3dcarparts.org/library/1999/Honda/CR-V/hubcap https://r2-upload.3dcarparts.workers.dev/file/parts/34f99bde-743a-42fd-9856-21080b867651/images/hubcap-1_1777955744562_f9e5l6.jpg in_stock 19.48 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Honda/CR-V/hubcap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf1bd818-2036-4ab6-b89e-a35212a4698c 2000 Honda CR-V Cup Holder Latte Adapter An improved cup holder adapter for your circa 2000 Honda CRV. This model features a tapered exterior for a better, more secure fit, and also a more broad and rounded top surface for safety, comfort, and aesthetics. https://3dcarparts.org/library/2000/Honda/CR-V/cup-holder-latte-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/cf1bd818-2036-4ab6-b89e-a35212a4698c/images/cup-holder-latte-adapter-1_1777955731352_8l01mx.jpg in_stock 25.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Honda/CR-V/cup-holder-latte-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a5067909-75d4-4e5a-9183-e6bfb8f798d5 2004 Honda CR-V Windshield Washer Reservoir Cap 2004 Honda CRV Windshield Washer Reservoir Cap https://3dcarparts.org/library/2004/Honda/CR-V/windshield-washer-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/a5067909-75d4-4e5a-9183-e6bfb8f798d5/images/windshield-washer-reservoir-cap-1_1777955728286_tr51mm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2004/Honda/CR-V/windshield-washer-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d4addb4e-22c3-4867-a042-a9080dd0267f 2000 Honda CR-V Wiper Fluid Cap "The Wiper Fluid Cap on my 2000 Honda CRV finally cracked and fell off, so I used the
freeware version of eMachineShop to design a replacement.
The Wiper Fluid Cap has a center hole in it so you can zip tie it to the long plastic piece that
slides down into the Wiper Fluid Storage Tank.
I printed the cap in PETG and so far it is holding up pretty well." https://3dcarparts.org/library/2000/Honda/CR-V/wiper-fluid-cap https://r2-upload.3dcarparts.workers.dev/file/parts/d4addb4e-22c3-4867-a042-a9080dd0267f/images/wiper-fluid-cap-1_1777955724785_jv3fx4.jpg in_stock 13.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/2000/Honda/CR-V/wiper-fluid-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d7bc9b8f-d32e-453e-bbb0-ed35ba74ef54 1997 Honda CR-V Door Grab Handle Arm Rest Clip "Honda CRV Door Grab/Handle/Arm Rest Clips
The clips that the door grab gets screwed into. works on all 4 doors, both front and rear clips for each door.
I printed them in ABS and they have held up fine. Make sure you clean up the hole the screw goes into or you may crack the part." https://3dcarparts.org/library/1997/Honda/CR-V/door-grab-handle-arm-rest-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d7bc9b8f-d32e-453e-bbb0-ed35ba74ef54/images/door-grab-handle-arm-rest-clip-1_1777955719114_8ugya7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Honda/CR-V/door-grab-handle-arm-rest-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7e95daec-f200-47b4-996e-bd70c612a5d1 2001 Honda CR-V Cupholder Adapter "2001–2006 (2nd Generation) Honda CR-V cupholders were designed atrociously, holding neither small nor large cups well in attempt to accommodate for both in the same space. I designed this 3D printable insert that allows you hold a large bottle like a HydroFlask or Nalgene without it tipping over while driving.
**Small Insert for Coffee Cups**: https://www.thingiverse.com/thing:4910630" https://3dcarparts.org/library/2001/Honda/CR-V/cupholder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/7e95daec-f200-47b4-996e-bd70c612a5d1/images/cupholder-adapter-1_1777955715810_f54dep.jpg in_stock 29.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Honda/CR-V/cupholder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-459a1a43-2e9c-461d-b24a-b7914f5402ec 2001 Honda CR-V Windshield Washer Fluid Reservoir Cap "Hey everyone!
I had a wiper reservoir that had a broken cap on a 2001 Honda CRV. I could not find a good design so I made my own. If you still have the dipstick, you can zip tie it to the end.
I make lots of custom designs for prototypes, etc. Please see my Esty page and let me know if you have any questions.
Thank you
https://www.etsy.com/shop/FillerCustoms?ref=shop_sugg_market" https://3dcarparts.org/library/2001/Honda/CR-V/windshield-washer-fluid-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/459a1a43-2e9c-461d-b24a-b7914f5402ec/images/windshield-washer-fluid-reservoir-cap-1_1777955710176_fevxsu.jpg in_stock 11.23 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/2001/Honda/CR-V/windshield-washer-fluid-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-432c2fed-d842-4d7a-a9b6-8332d30a3b69 2019 Honda CR-V Cup Holder Adapter "Most vehicle cupholders don't fit Nalgenes or Hydroflasks, so here's an adaptor to fix it! Designed to perfectly fit into the the cupholder for a 2019 Honda CR-V.
After printing, apply strips of felt around the outside walls of the part that is actually fitting into the cupholder to get a snug fit, and to prevent the plastic from rattling around.
This was designed as two pieces to hold two bottles, but either piece fits in the glovebox for when you're driving alone and don't want all the extra space taken up. Or you can just print one of these if you don't have/need any friends, like me!
A lip/raise is built into the bottom surface to contour to the side walls of the CR-V console that stick up." https://3dcarparts.org/library/2019/Honda/CR-V/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/432c2fed-d842-4d7a-a9b6-8332d30a3b69/images/cup-holder-adapter-1_1777955703375_23mbyw.jpg in_stock 37.80 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Honda/CR-V/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d089d67e-02b1-4d71-aece-1b8e80f85023 2002 Honda CR-V Cup Holder Insert 2002-06 Honda CRV has a poor cup holder design that causes drinks to tip over during a turn. This attachment fills in the empty space to hold drinks in place. https://3dcarparts.org/library/2002/Honda/CR-V/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/d089d67e-02b1-4d71-aece-1b8e80f85023/images/cup-holder-insert-1_1777955699429_4c2reb.jpg in_stock 20.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Honda/CR-V/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eaccf288-95f6-4fe3-b448-2f90e278d650 2002 Honda CR-V Hood Release Lever "My hood lever in Honda CR-V II was broken and now I've got beautifull new one. Attached by 5mm zip-tie.
New one layed on the old, broken one.
To rebuild:
https://cad.onshape.com/documents/ec91535ef19587f9b8887dba/w/5780b5219fca2657e05d6dfc/e/f20308453688a363720197ca
WARNING:
Rounded only (both sides) is hard to catch and pull,
arrowed one at the bottom is easier to use." https://3dcarparts.org/library/2002/Honda/CR-V/hood-release-lever https://r2-upload.3dcarparts.workers.dev/file/parts/eaccf288-95f6-4fe3-b448-2f90e278d650/images/hood-release-lever-1_1777955683315_7yc6ow.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Honda/CR-V/hood-release-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12bbc761-e8a2-4e6b-b7d2-87ffa53c2c71 2010 Honda Odyssey Engine Cover Stud Retainer My 2010 Honda Odyssey lost an engine cover stud retainer. So I drew one and printed it on my Ender 3v2 printer. The Honda part number is: 90501-SS8-A01 Engine Cover Stud Retainer and only costs $3.62 online. I printed mine out of PLA but that won't probably last. I'll probably have to print it out of a different material. I experimented by printing in different orientations. It retains the 91501-SS8-A01 Engine Cover Stud https://3dcarparts.org/library/2010/Honda/Odyssey/engine-cover-stud-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/12bbc761-e8a2-4e6b-b7d2-87ffa53c2c71/images/engine-cover-stud-retainer-1_1777955361926_8x6hi8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2010/Honda/Odyssey/engine-cover-stud-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-291b43b8-6ea0-4c85-978d-72f3435595e5 1984 Honda City Exterior Trim Clip "Exterior Trim clip replacement for a 1984 Honda city Pro T. Should fit other similar models.
Print with 4 walls so the clips are solid." https://3dcarparts.org/library/1984/Honda/City/exterior-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/291b43b8-6ea0-4c85-978d-72f3435595e5/images/exterior-trim-clip-1_1777955356391_bffc2m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1984/Honda/City/exterior-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5e8e0747-3259-4107-b56d-67b0b26c2d74 2003 Honda Element Backup Camera Mounting Clip "Backup camera clip that mounts to the trim.
Works best with cameras that look like this:
ebay.com/itm/184338154643" https://3dcarparts.org/library/2003/Honda/Element/backup-camera-mounting-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5e8e0747-3259-4107-b56d-67b0b26c2d74/images/backup-camera-mounting-clip-1_1777955350898_06parf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2003/Honda/Element/backup-camera-mounting-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-08215ce4-720a-4209-a80a-da92f84ef392 2015 Honda Fit Air Filter Cover Clip "This is an Airfilter clip for a 2015 Honda Fit, It's a little smaller and fits perfectly than the one listed at:
https://www.thingiverse.com/thing:3821226" https://3dcarparts.org/library/2015/Honda/Fit/air-filter-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/08215ce4-720a-4209-a80a-da92f84ef392/images/air-filter-cover-clip-1_1777955347202_49qalk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2015/Honda/Fit/air-filter-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7a17bae9-27c3-4e15-bb0b-81b3758d74ef 2007 Honda CR-V Door Card Clip "Clip for fastening the door card to the door.
Honda CR-V 3 2007-2012" https://3dcarparts.org/library/2007/Honda/CR-V/door-card-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7a17bae9-27c3-4e15-bb0b-81b3758d74ef/images/door-card-clip-1_1777955326457_7wpgvo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Honda/CR-V/door-card-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ed4925e0-6c12-4be9-b712-087f4c440007 2015 Honda Fit Air Filter Clip "Garage lost one of the clips for the air filter, I made a replacement in Blender.
Printed on a resin printer so it wouldn't have issues with temperature." https://3dcarparts.org/library/2015/Honda/Fit/air-filter-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ed4925e0-6c12-4be9-b712-087f4c440007/images/air-filter-clip-1_1777955320737_rjfcaz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2015/Honda/Fit/air-filter-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d18bbdff-7684-439b-9d46-7ab5f90aaae0 2011 Honda Odyssey Garbage Bag Holder Clip I made this to fit my 2011 Honda Odyssey garbage bag holder that is on the back end of the center counsel. I found this to be a perfect fit that snaps right in place and holds common grocery sacks securely unlike some others that I have tried. Give it a try and let me know what other year odysseys this works for. https://3dcarparts.org/library/2011/Honda/Odyssey/garbage-bag-holder-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d18bbdff-7684-439b-9d46-7ab5f90aaae0/images/garbage-bag-holder-clip-1_1777955026868_8ko4vx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Honda/Odyssey/garbage-bag-holder-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fd3d7c4b-1a26-4e72-9182-e29fffd3b2ac 2015 Honda Accord Rear Camera Mount "A quick part to screw the aftermarket Hizpo AHD1080P backup camera metal mounting bracket into on my 2015 Honda Accord 9th Gen.
It could likely be improved on, but it was good enough to work, so here it is..." https://3dcarparts.org/library/2015/Honda/Accord/rear-camera-mount https://r2-upload.3dcarparts.workers.dev/file/parts/fd3d7c4b-1a26-4e72-9182-e29fffd3b2ac/images/rear-camera-mount-1_1777955019224_r72g4f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2015/Honda/Accord/rear-camera-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f506a8c2-411c-4e17-9ed7-396bff372a12 2016 Honda Fit Shopping Bag Hook This is a bracket for the back seat headrests on a Honda Fit (2016). Handy for having your shopping back on to prevent your bread from being crushed on the way home. https://3dcarparts.org/library/2016/Honda/Fit/shopping-bag-hook https://r2-upload.3dcarparts.workers.dev/file/parts/f506a8c2-411c-4e17-9ed7-396bff372a12/images/shopping-bag-hook-1_1777955009184_x5cjx5.jpg in_stock 20.46 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Honda/Fit/shopping-bag-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d32134a-3e51-4c7d-990e-5d888e905662 2018 Honda Fit Shopping Bag Hook "I wasn't satisfied with the 2016 Honda Fit bag hooks, and not just because they don't fit the 2018 my wife drives.
My personal opinion: designing them as attached pairs doesn't make sense. That part was flimsy and broke easily. It served only to prevent the hooks from rotating on the headrest shaft which isn't a problem/concern. They also serve to make sure that they only fit on the right/left headrest and not the narrower center one. It also made printing take longer.
I also didn't want it to be as tall, since I don't like the headrests being up and in my field of view.
So I took the model, chopped half the passenger-side hook off, mirrored it to make it ""whole"", and then squashed it vertically by 50%. This flattened the hook too much, so I took the original hook and grafted it on.
I did all this using my wildly amateurish copy/paste skills, so when you look at the model it looks like crap. Sorry. It does print nicely.
The result is that these fit the shafts nicely - they slide easily so the headrest can go up/down and the hooks won't ""stick"" in place. But there's no extra ""play"" in the fit, so they don't rattle. Provided you're reasonably sane about what you hang on them (not bricks, gallons of milk, etc.) they should hold up quite well to normal use.
All credit to the original designer - I just hacked it up and glued it together digitally." https://3dcarparts.org/library/2018/Honda/Fit/shopping-bag-hook https://r2-upload.3dcarparts.workers.dev/file/parts/4d32134a-3e51-4c7d-990e-5d888e905662/images/shopping-bag-hook-1_1777955001903_6o71dq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Honda/Fit/shopping-bag-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8026df2b-0bb2-4d29-932d-fcf69c91afd0 2011 Honda Jazz / Fit Carpet / Floor Mat Holder "While cleaning the carpets I lost the holder.
I printed this in ABS because it can be hot in a car in bright sun.
Made it bigger, because the original ones tend to come loose in the replacement carpets that are non genuine Honda.
If you can't screw the flat piece on the other, you can heat the flat piece and screw it on, or scale only that piece + 0.5 mm in X and Y direction.
This is tested in a Honda Jazz 2011.
I don't know if it will work also on other Honda models, Check for the dimensions in your car.
If it fits on other Honda models, please let me know so I can add it to the description." https://3dcarparts.org/library/2011/Honda/Jazz%20%2F%20Fit/carpet-floor-mat-holder https://r2-upload.3dcarparts.workers.dev/file/parts/8026df2b-0bb2-4d29-932d-fcf69c91afd0/images/carpet-floor-mat-holder-1_1777954983192_7l6cv2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Honda/Jazz%20%2F%20Fit/carpet-floor-mat-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fa257426-8220-40a2-8df5-6a8cbddf0616 2010 Honda Fit Rear Wiper Arm Cover "Part replacement for my wife's car.
CAD file is attached if any adjustment is necessary.
Could fit other vehicles, but check dimensions before printing.
Printed with Creality CR-10 in Black PLA 1.75mm
Extruder @ 210°C and Bed @ 60°C
Dynamic Quality 0.16mm
Infill 25%
No Supports, when flat surface is down
Raft applied" https://3dcarparts.org/library/2010/Honda/Fit/rear-wiper-arm-cover https://r2-upload.3dcarparts.workers.dev/file/parts/fa257426-8220-40a2-8df5-6a8cbddf0616/images/rear-wiper-arm-cover-1_1777954976396_lcr8n6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Honda/Fit/rear-wiper-arm-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4ca7d5de-a2d7-4b5f-9724-67443fcdda48 2006 Honda Jazz Folding Power Mirror Gear "UPDATE:
Redesigned with tapered and reinforced teeth for printing with a 0.25mm nozzle. download V2.1
*Use at your own risk*
This is a design I used to fix the mirror on my 2006 jazz. It is the only plastic gear in the assembly and you can see in the photos its cracked and the shaft hole wore off. Its probably the same for models up to 2008." https://3dcarparts.org/library/2006/Honda/Jazz/folding-power-mirror-gear https://r2-upload.3dcarparts.workers.dev/file/parts/4ca7d5de-a2d7-4b5f-9724-67443fcdda48/images/folding-power-mirror-gear-1_1777954966164_ivijpm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Honda/Jazz/folding-power-mirror-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aa4de2a6-9c2e-4a1e-a748-edd25ca0926a 2007 Honda Jazz / Fit Folding Mirror Gear "Honda Jazz / Fit mk2 folding mirror gear.
Original gear was broken, motor was continuously turning.
24t 13mm od.
You can find the dissassembly of mirror here:
https://www.dropbox.com/s/2ygdv8r2kj73c8o/Repair%20Fit%20Jazz%20Mirror%20Motor.pdf?dl=0
(not mine)
Don't print a brim, it's difficult to remove and add useless postprocessing.
A nozzle <0.4mm may be a good thing." https://3dcarparts.org/library/2007/Honda/Jazz%20%2F%20Fit/folding-mirror-gear https://r2-upload.3dcarparts.workers.dev/file/parts/aa4de2a6-9c2e-4a1e-a748-edd25ca0926a/images/folding-mirror-gear-1_1777954955730_bwv9gv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Honda/Jazz%20%2F%20Fit/folding-mirror-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-293de187-c1ad-434d-9746-ba06bfea4d9f 2007 Honda Fit Front Bumper Plug Plug for front bumper Honda Fit 2007-2013 GE6 https://3dcarparts.org/library/2007/Honda/Fit/front-bumper-plug https://r2-upload.3dcarparts.workers.dev/file/parts/293de187-c1ad-434d-9746-ba06bfea4d9f/images/front-bumper-plug-1_1777954945840_a7qvk3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Honda/Fit/front-bumper-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f9c1911e-f53f-4f58-9eb9-172907a980ba 2008 Honda Fit Foglight Blockoff Plate This is a blockoff plate that goes in the fog light holes on a Honda Fit Sport (2nd generation). Rather than the couple of hundred bucks to replace them, I just made these instead. Print them mirrored left to right, then glue in place. I used dark gray PETG and epoxied them in place. https://3dcarparts.org/library/2008/Honda/Fit/foglight-blockoff-plate https://r2-upload.3dcarparts.workers.dev/file/parts/f9c1911e-f53f-4f58-9eb9-172907a980ba/images/foglight-blockoff-plate-1_1777954939133_n7kn4t.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Honda/Fit/foglight-blockoff-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c35bdf20-88bd-4794-8b5d-1a62e0e0d75b 1997 Honda Accord Cabin Filter Cover Cabin filter cover for Honda Accord 6 https://3dcarparts.org/library/1997/Honda/Accord/cabin-filter-cover https://r2-upload.3dcarparts.workers.dev/file/parts/c35bdf20-88bd-4794-8b5d-1a62e0e0d75b/images/cabin-filter-cover-1_1777954015795_ey430a.jpg in_stock 21.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Honda/Accord/cabin-filter-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d12fb802-07fb-4085-8e27-3634d5a698b7 2008 Honda Accord Gauge Pod This gauge holder is for a 2008-2012 Honda accord. It has openings for 2, 52mm (2 inch) gauges. I had specifically designed it to be used for air ride gauges and it fits in the opening underneath the radio. to use this gauge pod you will need to drill a small hole in the back corner of the piece under the radio in order to run your wires. https://3dcarparts.org/library/2008/Honda/Accord/gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/d12fb802-07fb-4085-8e27-3634d5a698b7/images/gauge-pod-1_1777953854282_ub4br6.jpg in_stock 11.42 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Honda/Accord/gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f73aec23-aa87-417c-af84-04a72d0a0317 1990 Honda Accord Accessory Button Phone Holder Mount "I realize that probably no one will make/use this but why not upload it just in case that one person out there wanted/had this exact idea too.
Requires the original steel clip to be taken off the cover and put on the print. The print seems to wobble slightly but ill tweak and upload when necessary as to not waste more filament than i have to. EDIT: This has been fixed and uploaded.
Vehicle: Honda Accord 1996 LX
Feel free to edit to your hearts content and/or call it your own if necessary :)" https://3dcarparts.org/library/1990/Honda/Accord/accessory-button-phone-holder-mount https://r2-upload.3dcarparts.workers.dev/file/parts/f73aec23-aa87-417c-af84-04a72d0a0317/images/accessory-button-phone-holder-mount-1_1777953845856_hbegx9.jpg in_stock 10.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Honda/Accord/accessory-button-phone-holder-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9c8be743-468f-4cd7-8874-f5e6d40fe25c 2003 Honda Accord Central Compartment Tray Extended central tray for the 2003 European Honda Accord. Fit without modifying any other piece https://3dcarparts.org/library/2003/Honda/Accord/central-compartment-tray https://r2-upload.3dcarparts.workers.dev/file/parts/9c8be743-468f-4cd7-8874-f5e6d40fe25c/images/central-compartment-tray-1_1777953833318_ais65l.jpg in_stock 29.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Honda/Accord/central-compartment-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b018a794-3889-4646-97e0-deb7e708dd65 2004 Honda Element Exterior Panel Clip This is a clip for the exterior panel of a Honda Element. I've only tested this on a 2004, and it works well there. https://3dcarparts.org/library/2004/Honda/Element/exterior-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b018a794-3889-4646-97e0-deb7e708dd65/images/exterior-panel-clip-1_1777953825098_88we5b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Honda/Element/exterior-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7de14299-3954-43bc-b0b8-58e31ac67817 1998 Honda Accord Hood Rod Grommet "Make sure to print in a flexible filament!
The part number for the actual replacement is 90601-S84-A01
Hello!
This is a grommet that holds the rod, that holds up your hood, on many (if not all) Hondas.
(Confirmed for 1998 Accord, and 2008 Fit)
When I bought my first car used, the plastic grommet that came with it from the factory was already broken. I finally got tired of having to mess with the rod to make sure it wouldn't slip out of the hole, that I decided to just make a new grommet out of flexible filament.
A replacement grommet would've been about 8 bucks, and a few days Amazon shipping.. Or a 10-minute design, then 20 minute print.
Bring a flat-head screw driver to help push the grommet into the hole on the car's frame. Depending on the hardness of the filament you use, you might be able to push it in with just your palm." https://3dcarparts.org/library/1998/Honda/Accord/hood-rod-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/7de14299-3954-43bc-b0b8-58e31ac67817/images/hood-rod-grommet-1_1777953819779_0ss6om.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Honda/Accord/hood-rod-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3bda863a-0de6-4015-b709-a6d1c6695df4 1998 Honda Accord Hood Prop Rod Grommet TPU Grommit for the hood prop rod on a 1998 honda Accord, fits 15mm hole and 8mm diameter hood rod. https://3dcarparts.org/library/1998/Honda/Accord/hood-prop-rod-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/3bda863a-0de6-4015-b709-a6d1c6695df4/images/hood-prop-rod-grommet-1_1777953814618_5b8lz6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Honda/Accord/hood-prop-rod-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-29d82129-420e-4e13-86ec-6829d72bd90d 1994 Honda Accord HVAC fan control knob I made this thing as a replacement AC knob for my Honda Accord. Prints in two parts and slides together. OpenSCAD file is attached for reference (but it isn't very pretty). https://3dcarparts.org/library/1994/Honda/Accord/hvac-fan-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/29d82129-420e-4e13-86ec-6829d72bd90d/images/hvac-fan-control-knob-1_1777953809311_500d70.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Honda/Accord/hvac-fan-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-164fe077-73c7-4bfb-8b72-ecb2f29e8c52 2011 Honda Fit Air Filter Box Clip I noticed that the clips that hold the air filter box on were missing in 2011 Honda Fit I just bought used. So, after looking up the part online and seeing that it was pretty simple, I just re-drew it in Fusion 360 and it worked perfectly. I printed it in ABS so it could withstand the temp under the hood. https://3dcarparts.org/library/2011/Honda/Fit/air-filter-box-clip https://r2-upload.3dcarparts.workers.dev/file/parts/164fe077-73c7-4bfb-8b72-ecb2f29e8c52/images/air-filter-box-clip-1_1777953805396_ypihso.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2011/Honda/Fit/air-filter-box-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5807133a-a3b6-41aa-8141-597c1827c52d 2013 Honda Accord Key Fob Shield "I have a 2013 Honda Accord plug-in hybrid. One of the features of many Honda automobiles is that you can lower all four windows by clicking the unlock button on the remote and then immediately clicking and holding it. The windows will lower until you let go of the button. This is a really nice feature until it happens by accident because something in your pocket pressed on the button. It is especially unpleasant if this happens while it is raining.
While the design is similar to https://www.thingiverse.com/thing:2676628 it was designed from scratch using Fusion 360. Some of the differences are that I need to be able to get to the buttons to open the trunk and the charging door, so I designed cut-outs for the lock, trunk, and charging door buttons. The unlock button is covered, but if you need to get to it you can just slide the cover down about 10 mm. I also added a cut-out on the back so you could see the Honda logo and the key fob driver number, and the height is limited to get to the slide to release the door key.
When I want to use the window feature I use the key to unlock and unlock-hold. I find that this gives me more control than using the remote when I want to lower the windows a little to allow the car to vent.
Update: 29 October 2022
I have redesigned the shield to fit tighter and made the walls thicker to see if this helps keep the shield on the key fob better. The new version is v5." https://3dcarparts.org/library/2013/Honda/Accord/key-fob-shield https://r2-upload.3dcarparts.workers.dev/file/parts/5807133a-a3b6-41aa-8141-597c1827c52d/images/key-fob-shield-1_1777953799572_0ydd0m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/2013/Honda/Accord/key-fob-shield?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-93cebd30-cb43-4bdc-a637-88100a55f7c2 2011 Honda Fit Shuttle Body Kit Clip "Body kit clip (skirts) Honda FIT Shuttle
20 X 17.5mm hook height 11mm. Tested, works))" https://3dcarparts.org/library/2011/Honda/Fit%20Shuttle/body-kit-clip https://r2-upload.3dcarparts.workers.dev/file/parts/93cebd30-cb43-4bdc-a637-88100a55f7c2/images/body-kit-clip-1_1777953794544_yp9qdk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2011/Honda/Fit%20Shuttle/body-kit-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b4452fd5-3fa3-42cd-aa87-f07f16a43ea4 2008 Honda Accord Body Panel Plug "On my 2008 accord I pulled out some rocker and rear quarter panel plugs to rust spray inside. These will fit in the holes.
The flat plug is for the 2 flat holes on the quarter panel.
The curved plug is for the 3 curved holes on the rocker panel." https://3dcarparts.org/library/2008/Honda/Accord/body-panel-plug https://r2-upload.3dcarparts.workers.dev/file/parts/b4452fd5-3fa3-42cd-aa87-f07f16a43ea4/images/body-panel-plug-1_1777953787928_7e5tz4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Honda/Accord/body-panel-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21983214-2b8e-4b75-ab25-d80c83e09c08 1993 Honda Del Sol Door Window Molding Clip This is the clip for the exterior molding at the base of the driver and passenger door windows of the Honda Del Sol. It definitely works on a 1996 model and I think is common to all years. These clips break easily when removing the molding. Replacements are hard to find and expensive (>$5 a piece). There are seven per side. I printed this clip in PETG and it works perfectly. ABS would also probably work. PLA might be a little weak, particularly in hot weather. https://3dcarparts.org/library/1993/Honda/Del%20Sol/door-window-molding-clip https://r2-upload.3dcarparts.workers.dev/file/parts/21983214-2b8e-4b75-ab25-d80c83e09c08/images/door-window-molding-clip-1_1777953780464_gviicj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Honda/Del%20Sol/door-window-molding-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-04752f2e-d5cb-4806-a6fa-3a2967430eb3 1993 Honda Accord A/C Knob "Press fit.
Printed with auto tree supports." https://3dcarparts.org/library/1993/Honda/Accord/ac-knob https://r2-upload.3dcarparts.workers.dev/file/parts/04752f2e-d5cb-4806-a6fa-3a2967430eb3/images/ac-knob-1_1777953775112_5d5lsz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Honda/Accord/ac-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-69ebfddf-bbc0-430e-b330-001672b3338b 1999 Acura Integra Hood Prop Clip "The clip holding the prop that holds the hood up crumbled on my '99 Acura Integra GS-R, so here it is (printed in Taulman Nylon Bridge, with a little support from buildplate only).
Likely fits other Acuras and Hondas of that era?" https://3dcarparts.org/library/1999/Acura/Integra/hood-prop-clip https://r2-upload.3dcarparts.workers.dev/file/parts/69ebfddf-bbc0-430e-b330-001672b3338b/images/hood-prop-clip-1_1777953769593_uov1ps.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Acura/Integra/hood-prop-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2bbfa3c9-d1b0-4d17-a96f-c4db78d65429 2008 Honda Odyssey Sliding Door Sun Shade Clip Honda Odyssey 2008 sun shade clip. This holds up the sun shade on the sliding doors. I reverse engineered from a broken one, so it is not exact, but worked in our van. Higher quality print may hold up beter. May require some sanding, etc. To install, push main hook into the hole in the van door first, then insert the smaller middle piece. This pushes out the clips and holds it in place in the door. https://3dcarparts.org/library/2008/Honda/Odyssey/sliding-door-sun-shade-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2bbfa3c9-d1b0-4d17-a96f-c4db78d65429/images/sliding-door-sun-shade-clip-1_1777953763687_p5cyof.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Honda/Odyssey/sliding-door-sun-shade-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9b948e99-e595-4be8-a4d4-d151fc672c88 2010 Honda Odyssey Engine Cover Stud My 2010 Honda Odyssey lost an engine cover stud. So I drew one and printed it on my Ender 3v2 printer. The Honda part number is: 91501-SS8-A01 Engine Cover Stud and only costs $2.47 online. I printed mine out of PLA but that won't probably last. I'll probably have to print it out of a different material. I experimented by printing in different orientations. https://3dcarparts.org/library/2010/Honda/Odyssey/engine-cover-stud https://r2-upload.3dcarparts.workers.dev/file/parts/9b948e99-e595-4be8-a4d4-d151fc672c88/images/engine-cover-stud-1_1777953756312_ccecac.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2010/Honda/Odyssey/engine-cover-stud?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-495f4545-ad75-45f3-b51e-77e0a0e642ee 2012 Honda Fit Jazz Side Skirt Mounting Clip I created this side skirt clip for 2012 Honda Fit Side Skirt. https://3dcarparts.org/library/2012/Honda/Fit%20Jazz/side-skirt-mounting-clip https://r2-upload.3dcarparts.workers.dev/file/parts/495f4545-ad75-45f3-b51e-77e0a0e642ee/images/side-skirt-mounting-clip-1_1777953738299_913ylk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Honda/Fit%20Jazz/side-skirt-mounting-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bd073cb8-7545-48d6-be79-85416918272a 2008 Honda Fit Hood Prop Clip This is a remix of the car hood bar/rod clip originally designed by loganwhitney, modified to fit into a Honda Jazz (called Honda Fit in some countries). https://3dcarparts.org/library/2008/Honda/Fit/hood-prop-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bd073cb8-7545-48d6-be79-85416918272a/images/hood-prop-clip-1_1777953731149_bu8950.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Honda/Fit/hood-prop-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8846379-ef63-4d8d-9836-e89939eddf7d 2017 Honda Odyssey Garbage Bag Clip We just recently got a 2017 Honda Odyssey and found a cool garbage bag holder that folds down on the center console. There wasn't a way to hold up the garbage bag on it so I designed a simple clip. It fit's pretty snug and is a pretty fast print. Enjoy! https://3dcarparts.org/library/2017/Honda/Odyssey/garbage-bag-clip https://r2-upload.3dcarparts.workers.dev/file/parts/c8846379-ef63-4d8d-9836-e89939eddf7d/images/garbage-bag-clip-1_1777953724381_hv7fq3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Honda/Odyssey/garbage-bag-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-73dee6f0-8cb6-4559-8eee-dd26d478b23f 1988 Honda CRX Side Protector Clip "91510-SH2-000
Layer height - 0,2mm
infill - 100%
ABS" https://3dcarparts.org/library/1988/Honda/CRX/side-protector-clip https://r2-upload.3dcarparts.workers.dev/file/parts/73dee6f0-8cb6-4559-8eee-dd26d478b23f/images/side-protector-clip-1_1777953719545_9ol3tc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1988/Honda/CRX/side-protector-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9ec33975-a2cb-40e5-a441-6d014779132d 2004 Toyota Prius Cup Holder Tray This fits in to the front most cupholder on a second generation Toyota Prius. 2004, 2005, 2006, 2007, 2008, 2009 Prius. The two top trays have two versions, one with a grab tab (shown in photos) and one without. https://3dcarparts.org/library/2004/Toyota/Prius/cup-holder-tray https://r2-upload.3dcarparts.workers.dev/file/parts/9ec33975-a2cb-40e5-a441-6d014779132d/images/cup-holder-tray-1_1777952807611_xemctd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Toyota/Prius/cup-holder-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4bc35d69-8d83-4e8c-b4fc-4158d9265be8 2005 Toyota Prius Key fob end cap / key ring clip The plastic clip surrounding the metal key used to open the door (And attach the key to a key ring) was broken completely. It took about 17 attempts before I came up with a usable result. This so far lasted over a year in my pocket before I traded my car in. The keys were identical between my 2005 and 2008 models, so it should fit anything between those two years, possibly more. Don't need to glue the halves together, but do so if you need.. The two halves slide together and the key ring holds it together. Print with the openings up as showin in the above photos and you won't need any supports. I use blue painter's tape on an unheated bed with PLA plastic. Let the parts fully cool before removing from the bed, so that they don't warp any. .1mm will make it so smooth you won't notice ridges. Zero post-printing process needed https://3dcarparts.org/library/2005/Toyota/Prius/key-fob-end-cap-key-ring-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4bc35d69-8d83-4e8c-b4fc-4158d9265be8/images/key-fob-end-cap-key-ring-clip-1_1777952800594_2ym5ti.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/2005/Toyota/Prius/key-fob-end-cap-key-ring-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-39743136-8a25-4d1f-8350-6dd8a363c839 2006 Honda Civic Wheel Arch Trim Clip Holder "Very simple clip holder I designed to allow me to reattach the clips that hold the wheel arch trim to the vechicle, after the original mounts snapped.
The Honda clips slide into these holders just like the one's that are originally molded to the trim, I plan to epoxy these in place.
I have included the original design as well as one with a base, in case more surface area is required to adhere the part properly." https://3dcarparts.org/library/2006/Honda/Civic/wheel-arch-trim-clip-holder https://r2-upload.3dcarparts.workers.dev/file/parts/39743136-8a25-4d1f-8350-6dd8a363c839/images/wheel-arch-trim-clip-holder-1_1777952792535_2e570i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Honda/Civic/wheel-arch-trim-clip-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf4255d8-0737-4394-8643-600a82f91d90 2007 Honda Civic Door Pocket Cover "For 4 door Civics. Not sure if it'll fit 2 door.
Double check length and rescale accordingly.
If you like my designs and want to support the cause, please consider a tip. Many thanks!" https://3dcarparts.org/library/2007/Honda/Civic/door-pocket-cover https://r2-upload.3dcarparts.workers.dev/file/parts/bf4255d8-0737-4394-8643-600a82f91d90/images/door-pocket-cover-1_1777952786422_dz343e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Honda/Civic/door-pocket-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-67c0d4c6-b52c-4f50-8c5d-af2eaea43d00 1992 Honda Civic Sunroof Clip "Honda Civic Sunroof Clip
For Type EG3 (e.g. Year 1992)" https://3dcarparts.org/library/1992/Honda/Civic/sunroof-clip https://r2-upload.3dcarparts.workers.dev/file/parts/67c0d4c6-b52c-4f50-8c5d-af2eaea43d00/images/sunroof-clip-1_1777952779860_kzply0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1992/Honda/Civic/sunroof-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8802c7ca-cea7-43fd-b42e-fc9fabd320ed 2004 Toyota Prius Key Fob Button Replacement "Repair cover and buttons for the broken key fob of my Toyota Prius (Model XW20).
Some glue is needed to attach the plate to the key fob." https://3dcarparts.org/library/2004/Toyota/Prius/key-fob-button-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/8802c7ca-cea7-43fd-b42e-fc9fabd320ed/images/key-fob-button-replacement-1_1777952768594_rt8nsu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2004/Toyota/Prius/key-fob-button-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b61607f0-b383-491b-b145-e781ccb94147 2016 Honda Civic AC Vent Clip "Honda Civics from 2016 through 2018 have [an annoying issue](https://www.youtube.com/watch?v=hbyTuJtPSL0) where the dash AC vents tend to continually tilt up and lack the tension to stay in the desired position.
This clip is a quick and easy fix that will lock the driver side AC vent into a horizonal position. It prevents the flaps from tilting up, but allow them to be temporarily tilted down.
Print in ASA if possible - PLA lacks the temperature resistance for long term use in hot cars, and ABS lacks the UV resistance useful for a print that gets a lot of time in the sun. I used 100% infill to avoid having pockets of hot air inside the print which may expand, but the difference is likely negligible due to the size of the clip. I've included pictures on where the clip should fit into the AC vent." https://3dcarparts.org/library/2016/Honda/Civic/ac-vent-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b61607f0-b383-491b-b145-e781ccb94147/images/ac-vent-clip-1_1777952763863_xv51cg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Honda/Civic/ac-vent-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-faf3b311-1d90-48f4-a527-af96f5af7216 2010 Toyota Prius Front Bumper Tow Hook Cover The one posted is the left (driver) side but you can make a mirror of the file for the right (passenger) side. https://3dcarparts.org/library/2010/Toyota/Prius/front-bumper-tow-hook-cover https://r2-upload.3dcarparts.workers.dev/file/parts/faf3b311-1d90-48f4-a527-af96f5af7216/images/front-bumper-tow-hook-cover-1_1777952758861_5bts09.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Toyota/Prius/front-bumper-tow-hook-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-edb6a512-1079-4cb1-88eb-a8ba3e653309 2004 Toyota Prius Wheel Center Cap "This is a small cap to cover the central hole in Toyota Prius wheels from the Gen2 line. The ""Touring"" model has nice-looking alloy-spoke wheels and you can dispense with the factory hubcaps -- but the axle bolt remains visible. This little cap fits in the center of the wheel and snaps into the same small interior groove that holds the center of the factory cap in place.
You can customize it with your own logo/initials/whatever, of course!" https://3dcarparts.org/library/2004/Toyota/Prius/wheel-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/edb6a512-1079-4cb1-88eb-a8ba3e653309/images/wheel-center-cap-1_1777952752021_bvj7rn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Toyota/Prius/wheel-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-98a883e4-11a2-4d66-acb2-fcf593a2b0a2 2004 Toyota Prius Centre Console Tray "This is a remix from iday's initial design. I've been looking for something like this for my car and he finally made it but it didn't hold my wallet or anything and I noticed there was still tons of room above the tray. So I raised it and added some rounded edges. In the future, I'll add a version with more sections for different needs.
Prints great with no supports in any material." https://3dcarparts.org/library/2004/Toyota/Prius/centre-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/98a883e4-11a2-4d66-acb2-fcf593a2b0a2/images/centre-console-tray-1_1777952746763_qx7ekm.jpg in_stock 20.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Toyota/Prius/centre-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a4dc0d73-7ba8-48cb-ba31-2931564a6f07 2010 Toyota Prius USB Blank Port Replacement "Designed this to make a USB flush mount I bought on ebay fit in place of the blanking plate on my 2010 Prius.
I didn't want to design clips, so it's made to friction fit into the hole, and the USB port friction fits in as well. This should work for any of the dash blank plates on the gen 3 prius, and also may work on other Toyota models of similar years.
Print in a heat and UV resistant filament such as PETG, ABS, or ASA. Print wide-end-down with supports.
The USB cable I used is a pretty generic one you can find on ebay, amazon, etc. I've included a photo for reference.
Here's the listing to the item I bought: https://www.ebay.com/itm/257372226001
Description (in case the listing is removed): ""USB 3.0 Panel Flush Mount Cable - Single USB 3.0 Male to Female AUX Car Mount""" https://3dcarparts.org/library/2010/Toyota/Prius/usb-blank-port-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/a4dc0d73-7ba8-48cb-ba31-2931564a6f07/images/usb-blank-port-replacement-1_1777952740164_ffm1ud.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/Prius/usb-blank-port-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ece72142-acc8-4cdc-ad63-ad8ea128dba5 2003 Toyota Prius Key Fob Button "I made this remix to repair the broken key fob of my Toyota Prius (Model XW20).
Some glue is needed to attach the plate to the key fob." https://3dcarparts.org/library/2003/Toyota/Prius/key-fob-button https://r2-upload.3dcarparts.workers.dev/file/parts/ece72142-acc8-4cdc-ad63-ad8ea128dba5/images/key-fob-button-1_1777952732037_lcwvyg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2003/Toyota/Prius/key-fob-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-19d33843-ca34-484d-9a3a-7fdcb3e93f75 2010 Toyota Prius Cup Holder "My 32oz hydroflask didn't fit in the cup holder of my 2010 Prius. I wanted a custom 3d printed solution to hold the hydroflask in my car instead of printing a generic adapter that goes in the normal cup holder.
This 3d print replaces the cup holder that is in the center console between the two front seats of the Prius. Simply pluck the old one out and slip this one in! No adapter or deconstruction of the car necessary." https://3dcarparts.org/library/2010/Toyota/Prius/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/19d33843-ca34-484d-9a3a-7fdcb3e93f75/images/cup-holder-1_1777952725970_qhmph9.jpg in_stock 17.61 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/Prius/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-371d51a9-19d4-4a5d-850d-cb8866b657bb 1990 Toyota Sera Bonnet Strut Clip "I originally tried using v3 of https://www.thingiverse.com/thing:1778337 but printing it upright did not give it enough strength. Putting the strut into the clip wound up splitting the clip. So I tried printing it sideways. Because of the design being closer to the original clip, it needed some support and I wasn't satisfied with how it printed. So I designed my own version from scratch, using the original thing as a guideline, but with the idea that I wanted it to be printable on its side with no supports.
To be clear: my part is less originally accurate than the one from sheanstickle, so if accuracy to the original OEM part is important to you, don't use mine! But if you use mine, don't worry, it will work, even if it is a little different." https://3dcarparts.org/library/1990/Toyota/Sera/bonnet-strut-clip https://r2-upload.3dcarparts.workers.dev/file/parts/371d51a9-19d4-4a5d-850d-cb8866b657bb/images/bonnet-strut-clip-1_1777952720632_vjkhkq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1990/Toyota/Sera/bonnet-strut-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12bdff85-7b15-4211-944e-83b0d6be8f8f 1998 Honda Civic Interior Light Button "Button of interior light For Honda Civic 6 (1998-2001)
almost standard for all civic 6s of this year, personally I created it for my car which is a 1998 fastback" https://3dcarparts.org/library/1998/Honda/Civic/interior-light-button https://r2-upload.3dcarparts.workers.dev/file/parts/12bdff85-7b15-4211-944e-83b0d6be8f8f/images/interior-light-button-1_1777952711899_dvx1d2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Honda/Civic/interior-light-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-608725e6-10e0-4434-ba33-b504056c3ddb 1992 Honda Civic 52mm Gauge Vent Pod "** 52mm Gauge Mount for Honda Civic EG Center Air Vent **
**Description:**
This mount is designed to replace the original center air vent of Honda Civic EG (hatchback, coupe, or sedan) models from 1992 to 1995, allowing you to securely install a 52mm gauge.
**Compatibility:**
Honda Civic EG (1992-1995)
Compatible with hatchback, coupe, and sedan models
**Installation:**
Remove the original center air vent from your Honda Civic EG.
Secure the 52mm gauge mount in the same location.
Insert your 52mm gauge into the mount and connect as needed.
**Recommended Material:**
ABS, PETG or ASA for durability and UV resistance
Consider using a material that matches your car's interior color for a seamless look" https://3dcarparts.org/library/1992/Honda/Civic/52mm-gauge-vent-pod https://r2-upload.3dcarparts.workers.dev/file/parts/608725e6-10e0-4434-ba33-b504056c3ddb/images/52mm-gauge-vent-pod-1_1777952699931_i8p2wt.jpg in_stock 8.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1992/Honda/Civic/52mm-gauge-vent-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-43edfc15-dff2-49de-b07a-43a151be0969 1996 Honda Civic Center Armrest Cover "I made these covers to fit this civic ek9 armrest as I got this one and it had no covers and it looked really bad with the holes.
Probably I could have done a better job on the texturing side but that's up to everybody's printing surface.
I printed them in black pet-g." https://3dcarparts.org/library/1996/Honda/Civic/center-armrest-cover https://r2-upload.3dcarparts.workers.dev/file/parts/43edfc15-dff2-49de-b07a-43a151be0969/images/center-armrest-cover-1_1777952692344_000vaw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Honda/Civic/center-armrest-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-87c7f0ea-f58b-4a6e-8220-01c14fa8fcc5 1992 Honda Civic Vent Support Clip "The vents on my 1992 Honda Civic are all worn out and they don't hold their position. These little clips go between the vents and keep the vents pointed in a downward direction so the AC/heat doesn't just blow over the top of your head.
They are a perfect, tight fit in my 1992 Honda, but they probably work very well for other vehicles too." https://3dcarparts.org/library/1992/Honda/Civic/vent-support-clip https://r2-upload.3dcarparts.workers.dev/file/parts/87c7f0ea-f58b-4a6e-8220-01c14fa8fcc5/images/vent-support-clip-1_1777952684796_2xuga4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1992/Honda/Civic/vent-support-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-768faccb-4ecc-4da3-8b8f-1f655fb70132 1997 Honda Civic Cup Holder "Shaved version to print on 220x220mm bed for example on Ender 3 Pro
Disable skirt / brim / raft." https://3dcarparts.org/library/1997/Honda/Civic/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/768faccb-4ecc-4da3-8b8f-1f655fb70132/images/cup-holder-1_1777952674473_t3bezj.jpg in_stock 29.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Honda/Civic/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-05c1e9cc-00eb-4693-9b43-9f2fb19a066c 1992 Honda Civic Armrest Latch "This latch was design to replace the plastic that latch the armrest to the plastic body. Is easily printable without any support.
Print it with ABS to make sure it won't deform with the heat of the car." https://3dcarparts.org/library/1992/Honda/Civic/armrest-latch https://r2-upload.3dcarparts.workers.dev/file/parts/05c1e9cc-00eb-4693-9b43-9f2fb19a066c/images/armrest-latch-1_1777952667587_b9rzas.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1992/Honda/Civic/armrest-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d3492ecb-706e-45d1-b3a4-17dbf75537be 2002 Honda Civic Side Skirt Clip "Honda 91513-S5S-E01 Clip, Side Sill Garnish (Upper)
This is the sticky clip to mount the side skirt for a USDM Honda Civic Si 2002-2005 EP3." https://3dcarparts.org/library/2002/Honda/Civic/side-skirt-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d3492ecb-706e-45d1-b3a4-17dbf75537be/images/side-skirt-clip-1_1777952663096_ari5co.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Honda/Civic/side-skirt-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-02323e3f-f8a2-4fd1-9258-d85d3e6dab73 2006 Honda Civic Air Conditioner High Pressure Tube Clip Make from original new. Clip for high pressure tube, 90 degrees clip. Original part number 91548-SR3-003 https://3dcarparts.org/library/2006/Honda/Civic/air-conditioner-high-pressure-tube-clip https://r2-upload.3dcarparts.workers.dev/file/parts/02323e3f-f8a2-4fd1-9258-d85d3e6dab73/images/air-conditioner-high-pressure-tube-clip-1_1777952658185_zxq19t.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2006/Honda/Civic/air-conditioner-high-pressure-tube-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a199f976-bfd1-44c5-bacf-b76f181279b1 2006 Honda Accord Sun Visor Clip "My 2006 Honda Accord sun visor clip broke. I tried printing and using clips for other Hondas but they didn't fit exactly right. So I designed my own. First time using fusion 360, so please don't judge the design too harshly.
One note... to remove the original clip, there is a hole in the back of the clip, stick a screwdriver in there and push. Then rotate the clip 90 degrees and it should pop right out." https://3dcarparts.org/library/2006/Honda/Accord/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/a199f976-bfd1-44c5-bacf-b76f181279b1/images/sun-visor-clip-1_1777952654167_zw2rwj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Honda/Accord/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8d1a8cf1-ce17-41bc-9080-b606397decb2 1986 Honda Accord Louver Clip "This is a super niche thing but I figured I would post it on the off chance somebody needs one of these sometime in the future. I know parts for this car are extremely hard to come by lol. My pin was missing for one side and the other side was a very tacky repair.
This is for my 1986 Honda Accord Lx-i hatchback. The models are in the correct rotation for printing, don't rotate it or the pin will have very little strength. Print at 100% infill. Be wary if you live somewhere really hot, this might not hold up very well depending what material you use. I live in Alaska and I've had no issue all summer." https://3dcarparts.org/library/1986/Honda/Accord/louver-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8d1a8cf1-ce17-41bc-9080-b606397decb2/images/louver-clip-1_1777952648408_bm2pde.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1986/Honda/Accord/louver-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-170cfd59-c390-4d69-9210-ab9f1e4d39b5 2009 Honda Accord Windshield Washer Reservoir Cap "This Windshield Washer Reservoir Cap fits on Honda Accord 09-12.
Bend the middle part with a hairdryer.
Enjoy!" https://3dcarparts.org/library/2009/Honda/Accord/windshield-washer-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/170cfd59-c390-4d69-9210-ab9f1e4d39b5/images/windshield-washer-reservoir-cap-1_1777952641900_5yj4zy.jpg in_stock 7.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Honda/Accord/windshield-washer-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2e0ec6a2-6da0-4691-8595-a611ad435aa6 2009 Honda Accord Hood Rod Clip "First time using Tinkercad. I wanted to make a fairly simple clip which holds the hood rod on my Honda Accord. The rod holder piece was broken, and this seemed like as good of place to start as any.
This is v4 of the design, the first was just to see if I got the sizing down correctly and if it would fit. The second was to add the retaining clip. The third I thought was good, but the rod clip was a little snug and I knew PLA would fail after just a few uses. This one has some negative space added under with support structure, plus the rod holder should be spot on. If it is not, I will revamp and upload the new one.
In all, I am happy with how this turned out. I have never used any sort of CAD before, and was more than a little apprehensive that I had gotten in over my head- but after a few days of playing with TinkerCAD, I have it down pretty good (for a beginner). It's an awesome application and I am looking for more things to design already. =)
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4rYajaJTPKt" https://3dcarparts.org/library/2009/Honda/Accord/hood-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2e0ec6a2-6da0-4691-8595-a611ad435aa6/images/hood-rod-clip-1_1777952637807_b0gzh1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Honda/Accord/hood-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e9885ab1-789f-4c6d-a527-bd9de1f3cfb1 1993 Honda Accord AC Thermostat Knob "Remix of [ShadowBadtz](https://www.thingiverse.com/ShadowBadtz)'s design:
```
This is a quick replacement thermostat knob for a 1993 Honda Accord
```
The main reason I chose to remix this is because I noticed a non-manifold issue with the first overhang layer that I couldn't seem to correct with Meshmixer or converting to a body within Fusion 360.
So, I imported the rough geometry into Fusion 360 and recreate the profile with sketches, using the aforementioned as a reference point. I decided to fillet the edges to alleviate potential pokes from searching around in the dark." https://3dcarparts.org/library/1993/Honda/Accord/ac-thermostat-knob https://r2-upload.3dcarparts.workers.dev/file/parts/e9885ab1-789f-4c6d-a527-bd9de1f3cfb1/images/ac-thermostat-knob-1_1777952632034_brhedw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Honda/Accord/ac-thermostat-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4db0fbdc-1e41-4de5-a6b4-595bb369e84c 1996 Honda Accord Heater Knob "Nothing fancy. This is a very basic replacement for a heater knob in a Honda Accord (Mine broke recently, so I made this one and printed it). It replaces this part:
http://www.autopartswarehouse.com/details/QQHondaQQAccordQQOES_GenuineQQHeater_KnobQQ19961997QQW0133-1638723.html
Included is the OpenSCAD files which can be potentially adjusted to fit other cars. You can also adjust the number of cylinders around the perimeter of the knob." https://3dcarparts.org/library/1996/Honda/Accord/heater-knob https://r2-upload.3dcarparts.workers.dev/file/parts/4db0fbdc-1e41-4de5-a6b4-595bb369e84c/images/heater-knob-1_1777952624658_179pmw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Honda/Accord/heater-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-af556437-8d7d-4cd1-81db-16bc3a1c9614 2003 Honda Accord Front Bumper Hole Cap There's these holes in my Honda Accord (CN1) front bumper. I designed this to close these. https://3dcarparts.org/library/2003/Honda/Accord/front-bumper-hole-cap https://r2-upload.3dcarparts.workers.dev/file/parts/af556437-8d7d-4cd1-81db-16bc3a1c9614/images/front-bumper-hole-cap-1_1777952617579_dklhcn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Honda/Accord/front-bumper-hole-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-048a96eb-17ee-49d1-8166-4b3edc71b13c 2003 Toyota Prius Fog Light Cover After original light corroded too much for use i replaced them with covers i printed. Cover is only 4mm high and requires glue for instalation. https://3dcarparts.org/library/2003/Toyota/Prius/fog-light-cover https://r2-upload.3dcarparts.workers.dev/file/parts/048a96eb-17ee-49d1-8166-4b3edc71b13c/images/fog-light-cover-1_1777951833924_cz6r0b.jpg in_stock 9.33 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Toyota/Prius/fog-light-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7cb95fd4-0ae4-4747-94eb-eec8ae4fbfc9 2005 Toyota Prius Phone Holder "I made this to fit my 2005 Toyota Prius, it sits in the cassette player (its never being used anyway). Made in the size of my chinese phone Bluboo and it has a 6"" display, Can be altered to fit other phones I guess." https://3dcarparts.org/library/2005/Toyota/Prius/phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/7cb95fd4-0ae4-4747-94eb-eec8ae4fbfc9/images/phone-holder-1_1777951827564_anbuoh.jpg in_stock 20.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Toyota/Prius/phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-894b8f42-0af2-4919-9a58-884ba50aa600 2004 Toyota Prius Oil Filter Removal Tool "Oil filter screw size: 64mm with 14 side.
Connector side: 32mm socket." https://3dcarparts.org/library/2004/Toyota/Prius/oil-filter-removal-tool https://r2-upload.3dcarparts.workers.dev/file/parts/894b8f42-0af2-4919-9a58-884ba50aa600/images/oil-filter-removal-tool-1_1777951815490_1j30tl.jpg in_stock 16.95 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2004/Toyota/Prius/oil-filter-removal-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dee34598-34e5-40b6-b574-5d0f7a3fe46b 2010 Toyota Prius Upper Glove Compartment Organizer "Helps to keep objects from sliding around in the upper portion of the glove compartment. Fits a 3rd generation Prius, but should also fit the 2nd gen as well (I think the dimensions are nearly the same?) Use rubber bumpers for additional stability.
As you can see in the picture it does not fit from end to end. I made it this way because my printer's maximum length is just under 9"". Of course you could always scale it to a perfect fit with your slicer. I would leave the depth (plus height) as is however, as it allows the door to close just fine.
Also included two versions, 1st one with a complete base and the 2nd with a partial base. Reason is because this should be printed in ABS in order to withstand temperature extremes, and with my printer, the more ABS touches the bed surface the more it warps.
Dimensions are: 8 1/2"" length, 4"" depth, 2"" height." https://3dcarparts.org/library/2010/Toyota/Prius/upper-glove-compartment-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/dee34598-34e5-40b6-b574-5d0f7a3fe46b/images/upper-glove-compartment-organizer-1_1777951810354_4tw0ku.jpg in_stock 29.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/Prius/upper-glove-compartment-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-80354c42-7428-47c9-ae3e-506373233c03 2010 Toyota Prius Front Bumper Hole Cover I've strengthen the 2 lock of Cover which was easily broken. https://3dcarparts.org/library/2010/Toyota/Prius/front-bumper-hole-cover https://r2-upload.3dcarparts.workers.dev/file/parts/80354c42-7428-47c9-ae3e-506373233c03/images/front-bumper-hole-cover-1_1777951806324_h6mdkq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Toyota/Prius/front-bumper-hole-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0a2d0efc-b54b-4a8d-b9c2-9225f0345f2f 2012 Honda Civic Hood Rod Clip 2012 Honda Civic hood rod clip. Added side walls to prevent hood rod from contacting battery terminal if the clip breaks. Designed for 8.2mm Rod https://3dcarparts.org/library/2012/Honda/Civic/hood-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0a2d0efc-b54b-4a8d-b9c2-9225f0345f2f/images/hood-rod-clip-1_1777951686382_jkvkfp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Honda/Civic/hood-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f12b3637-df2c-4db5-836b-fc9e4e53c895 2003 Honda Civic Hood Clip My hood clip went missing on my 2003 Honda civic and caused the rod to rub a hole in one of my AC hoses. If yours has gone missing I would suggest you print or get someone print this little guy for you. It will save you about $200 in the long run. https://3dcarparts.org/library/2003/Honda/Civic/hood-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f12b3637-df2c-4db5-836b-fc9e4e53c895/images/hood-clip-1_1777951682681_ycw0w1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Honda/Civic/hood-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-49c7c837-2d29-424a-9448-dbed777a8924 2001 Honda Civic Sun Shield Clip These are home-made clips printed in 3D to replace broken original clips for my wife's Honda Civic MY 2002 EU model. https://3dcarparts.org/library/2001/Honda/Civic/sun-shield-clip https://r2-upload.3dcarparts.workers.dev/file/parts/49c7c837-2d29-424a-9448-dbed777a8924/images/sun-shield-clip-1_1777951678912_rth15v.jpg in_stock 34.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Honda/Civic/sun-shield-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f4fc3247-7c07-4ca0-b5c7-6ea8956f5441 1989 Honda Civic/CRX Door Panel Clips "Made this clips for the door panel of my 1990 Civic, might also fit other years and models.
Full print is 16.3x18.4x16.3 mm walls/top/bottom and 50% infill came to about 2g in weight." https://3dcarparts.org/library/1989/Honda/Civic%2FCRX/door-panel-clips https://r2-upload.3dcarparts.workers.dev/file/parts/f4fc3247-7c07-4ca0-b5c7-6ea8956f5441/images/door-panel-clips-1_1777951673554_17iri5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Honda/Civic%2FCRX/door-panel-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8c9a56a-3dce-4126-a4de-4f26e1106238 1992 Honda Civic Washer Tube Clip This part broke from my civic EG so I decided to create a new one ;) enjoy https://3dcarparts.org/library/1992/Honda/Civic/washer-tube-clip https://r2-upload.3dcarparts.workers.dev/file/parts/c8c9a56a-3dce-4126-a4de-4f26e1106238/images/washer-tube-clip-1_1777951670212_xhduzq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1992/Honda/Civic/washer-tube-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7f38e4f6-ebe0-4cef-838a-1319cb695f7f 2010 Toyota Prius Wheel Rim Center Cap "This is a center cap for a Toyota Prius. It fits a 2010 Prius. Not sure if it fits any other year.
There are a few different versions." https://3dcarparts.org/library/2010/Toyota/Prius/wheel-rim-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/7f38e4f6-ebe0-4cef-838a-1319cb695f7f/images/wheel-rim-center-cap-1_1777950941436_jfjpqo.jpg in_stock 9.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Toyota/Prius/wheel-rim-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-84ef2da2-6e33-4ea1-a2f1-3e789eb35586 1999 Toyota Camry Door Handle Insert "Although, I try to maintain the car as best as I can, things break. One of the weak points was the door handle. It broke in half and looks ugly. At first I tried to epoxy it back on but there is so much force that I couldn't keep the thing attached. So I have been designing an insert that will slip inside the door handle pocket and the outside face can be attached to it.
After more than 30 iterations of the design, I believe it's getting close to being done so I'm releasing to you all.
Please let me know if you use it. Thank You." https://3dcarparts.org/library/1999/Toyota/Camry/door-handle-insert https://r2-upload.3dcarparts.workers.dev/file/parts/84ef2da2-6e33-4ea1-a2f1-3e789eb35586/images/door-handle-insert-1_1777889481391_19umnw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Toyota/Camry/door-handle-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cdd13184-0bcd-41c5-bc38-0be1a90deec3 2007 Toyota Camry Trunk Latch Rod Clip "* Needs support.
* Should be printed with .1 layer height.
* Should be printed with either PLA-CF, PETG or ABS for strength reasons." https://3dcarparts.org/library/2007/Toyota/Camry/trunk-latch-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/cdd13184-0bcd-41c5-bc38-0be1a90deec3/images/trunk-latch-rod-clip-1_1777889478006_2tjslw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Toyota/Camry/trunk-latch-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-10ab2cc2-6405-4841-8bce-a72c4f377e2e 2006 Scion tC Exterior Door Handle Rod Clip "The clip on my 2006 Scion TC door handle broke. The door would open from the inside but not the outside. Just install this clip into the handle, then press the rod through to hold it in place. I believe it is part # 69293H not expensive but I wanted it today. Remixed from a similar clip but lengthened.
https://parts.toyota.com/a/Scion_2006_TC/_65510_6711689/FRONT-DOOR-LOCK--HANDLE/277410-6703.html" https://3dcarparts.org/library/2006/Scion/tC/exterior-door-handle-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/10ab2cc2-6405-4841-8bce-a72c4f377e2e/images/exterior-door-handle-rod-clip-1_1777889473329_221ty5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Scion/tC/exterior-door-handle-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5c711750-0d92-41b9-b051-67f72e4ed641 1999 Lexus IS200/IS300 Pillar Clip "A friend asked me to route e microphone in his car but in the middle of the process i lost the clips for left Pillar console.
We tried to get new ones from the store but they didn't fit so .... 3d printing to the rescue.
A few tries and we ended with very good fit . Well not great but it works fine.
This will fit Lexus Is200/IS300 - 1999-2005 , maybe some Toyotas and most probably GS Series from the same year.
I printed this with PLA .
0.2 layer height , 215 degrees, supports, 40mm speed ," https://3dcarparts.org/library/1999/Lexus/IS200%2FIS300/pillar-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5c711750-0d92-41b9-b051-67f72e4ed641/images/pillar-clip-1_1777889469211_qm89bd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Lexus/IS200%2FIS300/pillar-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a4d33eac-53c1-4461-a5bf-6f9d53b39d40 2005 Toyota Yaris Rear Wiper Attachment "my windshield wiper clip was snapped due to heavy snowfall. To replace the part, you will need to saw off the end of the wiper arm with the bad clip, insert the part (preferably printed in PETG, nylon, or ABS), and secure it with 4-6 M3 screws ( you can use M2 screws with threaded inserts aswell). Then just install it on the car
goes well with this: https://www.thingiverse.com/thing:4949898" https://3dcarparts.org/library/2005/Toyota/Yaris/rear-wiper-attachment https://r2-upload.3dcarparts.workers.dev/file/parts/a4d33eac-53c1-4461-a5bf-6f9d53b39d40/images/rear-wiper-attachment-1_1777889465211_jutvkh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Toyota/Yaris/rear-wiper-attachment?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a4fe06c2-1479-4fad-82b4-471aa6ba15fd 1982 Toyota Celica Supra Grille Clip "Toyota Celica Supra MK2 Grille Clip, part nr 90467-12008.
Save the shipping cost and print some instead!
Should work with any filament, but preferably ABS or PETG.
Cut a peace of 1,75 filament and stick in the top hole with 3-4mm sticking out on each side to make the top pins. Glue or heat in place.
Used settings:
0.10mm layer hight
0.40mm line with
100% infil or 99999 bottom layers
40 mm/sec print speed
No support
5 lines Brim
SAVE THE DRAGONS!
Best regards, Robin!" https://3dcarparts.org/library/1982/Toyota/Celica%20Supra/grille-clip https://r2-upload.3dcarparts.workers.dev/file/parts/a4fe06c2-1479-4fad-82b4-471aa6ba15fd/images/grille-clip-1_1777889460342_7jrpbv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1982/Toyota/Celica%20Supra/grille-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d93fde00-e48a-4009-8259-4577a5e2dab0 2008 Toyota IQ Carpet Mat Holder After printing the version from Brynildsen it didn't fit my Toyota IQ carpet mat. I took the original and adjusted Brynildsen's version to match the original better. Now it fits. https://3dcarparts.org/library/2008/Toyota/IQ/carpet-mat-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/d93fde00-e48a-4009-8259-4577a5e2dab0/images/carpet-mat-holder-2-1_1777889455606_we8ycn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Toyota/IQ/carpet-mat-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1a384031-f9be-4cd8-b7e6-54bed1cae379 1989 Toyota HiAce Curtain Clips "Curtain clips for the Toyota Hiace H100 Super Custom/Granvia.
4 types of clips included (one is not shown in the comparision photo)." https://3dcarparts.org/library/1989/Toyota/HiAce/curtain-clips https://r2-upload.3dcarparts.workers.dev/file/parts/1a384031-f9be-4cd8-b7e6-54bed1cae379/images/curtain-clips-1_1777889447170_d1dlao.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Toyota/HiAce/curtain-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c6a89803-d645-460e-9aa9-296d5f125cbe 1997 Toyota Camry Cabin Air Filter Adapter "Toyota Camry/Camry Gracia XV20 and Mark II Qualis SXV/MCV20 Japan cabin air filter
I adapted the original model for JDM right-hand drive vehicles. The mounting hole shape is slightly different on these vehicles, but that's not a big deal. This adapter is installed using sealant, which will seal any gaps.
The model is optimized for minimal use of supports; it is sufficient to specify a support angle greater than 80 degrees.
The two-piece version is less than 170 mm wide.
The second, two-piece version has additional corner adhesion points for those whose corners tend to peel off.
And the one-piece version is for those lucky enough to own a printer with a print area of 300 mm or larger.
The filter used is from a Hyundai i20 KIA/HYUNDAI 971331J000
IMPORTANT! Models may be oriented incorrectly. The model should be printed in the position it will be in the car, with the filter space at the top. When modeling, I use a comfortable surface and don't control the top and bottom positions." https://3dcarparts.org/library/1997/Toyota/Camry/cabin-air-filter-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/c6a89803-d645-460e-9aa9-296d5f125cbe/images/cabin-air-filter-adapter-1_1777889435436_j1gjgs.jpg in_stock 26.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Toyota/Camry/cabin-air-filter-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-88195717-c69a-4e43-b1d1-fec1258ac244 2001 Lexus LS430 Sunglasses Holder Latch Retainer "This part replaces the worn sunglasses latching portion of 01-06 LEXUS LS430 Sunglasses holder.
2001-2006
I was having a problem with my sunglasses holder falling down. After taking it apart I realized that my latch was broken and the locking pin was missing. So I CAD modeled a new part using the OEM latch and 3D printed it out. It works perfectly. You can use the M2 x 12mm screw to lock in the part and it will not come out.
Easy fix for those who own the beautiful UCF 30 and UCF 31 cars." https://3dcarparts.org/library/2001/Lexus/LS430/sunglasses-holder-latch-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/88195717-c69a-4e43-b1d1-fec1258ac244/images/sunglasses-holder-latch-retainer-1_1777889431988_bawm4m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Lexus/LS430/sunglasses-holder-latch-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54a15cf8-75bf-4603-a6b2-c5f48c7e9992 1995 Toyota Tacoma Windshield Washer Fluid Reservoir Cap "The washer fluid cap on my 98 tacoma felt apart so i designed and printed this replacement.
This should be toyota part number 85316-06021 and should fit the following models.
Avalon 1995-2012 Limited, XL, XLS
Camry 1994-2006 CE, DX, LE, SE, XLE
Tacoma 1995-2004 DLX, SR5
But I can only be sure that it fit my truck, As you can see on the pictures I printed a version without graphics on the top to test fit. It has been holding up nicely for months now." https://3dcarparts.org/library/1995/Toyota/Tacoma/windshield-washer-fluid-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/54a15cf8-75bf-4603-a6b2-c5f48c7e9992/images/windshield-washer-fluid-reservoir-cap-1_1777889427402_cnb6j8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/1995/Toyota/Tacoma/windshield-washer-fluid-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f7ef263-f482-4f9a-822b-bbe839d411f3 1989 Toyota MR2 Tail Light Clip Finally the file! I was given this by a kind soul, and now I get to share it with everyone! https://3dcarparts.org/library/1989/Toyota/MR2/tail-light-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8f7ef263-f482-4f9a-822b-bbe839d411f3/images/tail-light-clip-1_1777889423875_1vu4iv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1989/Toyota/MR2/tail-light-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1a167e4a-5282-4b13-8f20-accbcfbac0aa 1983 Toyota Celica Sunvisor bracket and clip plastics Both sunvisor plastic pieces for RA64 Celicas. The clip isn't much of a clip, and the sunvisor just rests on the piece. OEM style but not a perfect replica. https://3dcarparts.org/library/1983/Toyota/Celica/sunvisor-bracket-and-clip-plastics https://r2-upload.3dcarparts.workers.dev/file/parts/1a167e4a-5282-4b13-8f20-accbcfbac0aa/images/sunvisor-bracket-and-clip-plastics-1_1777889417156_zm527u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Toyota/Celica/sunvisor-bracket-and-clip-plastics?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9059ef0c-6f63-4456-adac-1bc25b1f737f 2009 Toyota Prius Wiper Nut Cap Toyota Prius III Wiper Nut Cap https://3dcarparts.org/library/2009/Toyota/Prius/wiper-nut-cap https://r2-upload.3dcarparts.workers.dev/file/parts/9059ef0c-6f63-4456-adac-1bc25b1f737f/images/wiper-nut-cap-1_1777889411632_qp9eui.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Toyota/Prius/wiper-nut-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9755afc0-0483-4b07-aac2-316cdd2ffed7 2007 Toyota Tacoma Floor Mat Clip "Proper spacing to install Toyota floor mats. Currently using it in a 2007 Toyota Tacoma, but I'm sure it will work for other cars.
Edited Redniik's design to have snaps on both ends so that the plastic didn't protrude above the mat. My shoes kept kicking the other ones and I was afraid I'd eventually break it." https://3dcarparts.org/library/2007/Toyota/Tacoma/floor-mat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9755afc0-0483-4b07-aac2-316cdd2ffed7/images/floor-mat-clip-1_1777888956970_aoet33.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Toyota/Tacoma/floor-mat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d1537bb6-f583-4823-bc08-e1f26cd94223 2019 Toyota 4Runner Console Caddy "I wanted to be able to store some of my car EDC items in the usually wasted space in front of the cupholder in my 2019 5th gen. 4Runner. I modeled up this caddy and stuck it to the bottom of the space with some heavy duty self adhesive velcro (after removing the rubber tray in this area). The items in the caddy are pictured, but can also be found here:
https://smile.amazon.com/Sharpie-Permanent-Marker-2-Count-2018330/dp/B07GMVNZWZ/ref=sr_1_5?crid=1RP57KY4RNTDK&keywords=sharpie+pro+permanent+marker&qid=1652479703&sprefix=sharpie+pro%2Caps%2C142&sr=8-5
^sharpie pro^
https://smile.amazon.com/gp/product/B001S0IN46/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
^streamlight 88850 PolyTac^
https://www.ebay.com/itm/393231313445?epid=23044016269&hash=item5b8e69aa25:g:Xg8AAOSwUqRgZ2Dj&amdata=enc%3AAQAHAAAA4EFkV%2Bs4o%2BBBlEG86VrkCYTC6QcTOFghQJhFv%2FMLBO69DaVVdWDp1eOVe17H27cR09jaNp9HyobSWPog2ft%2BTTRPcNHr2OZkXCkkattgfL2r8ilNUg8VLo9LkaDgiIxxFlSREvMzR%2Flcaq6g0vZuYBYqJXDtiNqLgn1CZ0psXu6bJyPQn2OdC6eO%2FYLyYej%2B9Xp0B%2BzPfnUs3t5IhSY80H2VU3ikKaKQKbogQctgkk%2Fman3oyVJqukUXVwQJApZUn2E%2Bk7sub3R7iDia8ceRjJvGb6VNYckLk7p3%2BaTk2%2FwV%7Ctkp%3ABFBM8svL95dg
^Milwaukee Fastback 6 in 1^
This is probably the best pocketknife I have ever carried. It is so versatile and I find myself using the flip out screwdrivers to pry/drive screws all of the time. I seriously love this knife and have been carrying it for a couple of years now.
The fit of everything is pretty snug, but this is by design. I did not want everything rattling around in the caddy as I drove. This, as well as everything else I have posted, was designed in inches. If it shows up tiny in your slicing software, do not comment on how the scale is screwed up, but multiply the scale by 25.4 to convert mms to inches. Let me know what you think and post those makes!" https://3dcarparts.org/library/2019/Toyota/4Runner/console-caddy https://r2-upload.3dcarparts.workers.dev/file/parts/d1537bb6-f583-4823-bc08-e1f26cd94223/images/console-caddy-1_1777888952249_z8d84a.jpg in_stock 29.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Toyota/4Runner/console-caddy?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-19730ea9-811a-4e5c-bd0d-19c1d4abf38c 2010 Toyota 4Runner ScanGauge II Steering Column Mount Spacer The steering column for the 5th gen 4Runner is curved, while the ScanGuage II bottom is flat. This creates a spacer to fill the gap. I used 3M VHB tape to connect the two. Make sure to wipe the steering column plastic with rubbing alcohol to remove any oils that will prevent a strong bond. I placed the scanguage as far back as it would go with the steering wheel pressed in as far as it would go. https://3dcarparts.org/library/2010/Toyota/4Runner/scangauge-ii-steering-column-mount-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/19730ea9-811a-4e5c-bd0d-19c1d4abf38c/images/scangauge-ii-steering-column-mount-spacer-1_1777888949213_yugwf4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2010/Toyota/4Runner/scangauge-ii-steering-column-mount-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-96670619-ade1-432c-9c0c-37ccafbb8819 1983 Toyota Sprinter Flare Clip "Flare clip, copied from an original on an AE86 (toyota sprinter).
Picture shows it installed in the footwell." https://3dcarparts.org/library/1983/Toyota/Sprinter/flare-clip https://r2-upload.3dcarparts.workers.dev/file/parts/96670619-ade1-432c-9c0c-37ccafbb8819/images/flare-clip-1_1777888946072_vw9dfk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Toyota/Sprinter/flare-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fa07c9a2-817a-43b1-806c-e523b83e195e 2006 Toyota Corolla Square Fender Clip Fender clip or retainer for Toyota Corolla year 2006. These are the square retainers that go in the wheel arch liner. https://3dcarparts.org/library/2006/Toyota/Corolla/square-fender-clip https://r2-upload.3dcarparts.workers.dev/file/parts/fa07c9a2-817a-43b1-806c-e523b83e195e/images/square-fender-clip-1_1777888942574_k67egw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Toyota/Corolla/square-fender-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-664f4f0e-2537-434b-910f-dea18c48904a 1991 Toyota Corolla Window Crank Knob This should work for older model Toyotas as well as geos https://3dcarparts.org/library/1991/Toyota/Corolla/window-crank-knob https://r2-upload.3dcarparts.workers.dev/file/parts/664f4f0e-2537-434b-910f-dea18c48904a/images/window-crank-knob-1_1777888939139_8zxmx7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Toyota/Corolla/window-crank-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ed008157-9598-4968-886a-6ec37bc0ebdf 1999 Toyota Corolla Clock Panel Replacement "In my '99 Corolla, there is a blank piece of plastic above the radio in the center console where a clock would have been in a different trim level. I noticed during stereo installation that the plug for the clock was still present, and that an unswitched 12v supply was present. As the cigarette lighter is inconveniently located under the drink holder, I thought this would be a good place for a 12v-USB charging connector for mobile device charging. A newer radio install added a rear-mounted USB port and an AUX in port, so I decided to replace the panel with one that would snap in place where the old one was, but offer ports that I needed.
I chose USB ports that transferred insertion force to the panel they were mounted in, and paid a ridiculously high price for them. https://www.digikey.ca/product-detail/en/amphenol-commercial-products/MUSB-A511-00/MUSB-A511-00-ND/1242675
The 3.5mm/1/8th in audio jack for AUX in was far more reasonable. http://www.btw-electronics.net/PLUGS-JACKS-ADAPTERS-CABLES-CONNECTORS/3.5mm-mono,-snap-in-type-panel-mount-phone-jack,-70-533,-philmore?sort=p.model&order=DESC&page=4&limit=50
Both connectors had the advantage of having very specific measurements for their needed cutouts online.
Some photos show an earlier prototype.
UPDATE 17 JUNE 2016: The part has begun to deform due to heat and no longer clips into the dash. This is in relatively moderate Toronto spring temperatures, so using PLA for this Thing is not advised. I will shortly print it again in high temp PLA or ABS." https://3dcarparts.org/library/1999/Toyota/Corolla/clock-panel-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/ed008157-9598-4968-886a-6ec37bc0ebdf/images/clock-panel-replacement-1_1777888935919_nzdepa.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Toyota/Corolla/clock-panel-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f46f78d8-0382-4213-9a6a-b65b26a42673 1979 Toyota Corolla Window Garnish Front Door Lower Frame Bracket "Printable replacement part for Toyota part no. 67492-12030 (Garnish Front Door Lower Frame Bracket) Fits Corolla and others: AE71 CE70 KE70 TE71
Left-hand part measured and modeled from original Toyota part; can be mirrored in your slicer of choice to make the right-hand version. Dimensionally accurate +/-1mm, includes provisions for original rubber.
Goes without saying but must be printed in high-temperature material such as ASA/ABS to survive in a car's interior. Because of the sharp corners, I had lots of problems with lifting and warping; Suggest a 15-20mm raft and mouse-ears." https://3dcarparts.org/library/1979/Toyota/Corolla/window-garnish-front-door-lower-frame-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/f46f78d8-0382-4213-9a6a-b65b26a42673/images/window-garnish-front-door-lower-frame-bracket-1_1777888932441_llbvgl.jpg in_stock 11.12 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Toyota/Corolla/window-garnish-front-door-lower-frame-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d22e84f2-0c62-4cc8-923f-246a50fe8392 2002 Toyota Corolla Rear Seat Release Handle "This is a replacement rear seat fold-down handle for an E120 (~2002-2007 depending on where you live) Toyota Corolla hatchback. It's the small handle you use to release the rear seats so they can fold down and expand the boot/trunk size.
I designed this for a friend who had lost the handle on the right (driver) side and was having trouble operating the small metal lever the handle clips on to.
The part is a direct push-fit replacement, just print the part as directed then push it onto the metal lever till you hear/feel a slight click. It should then be locked pretty firmly in place and can be used to operate the rear seat release.
Feedback and remixes are welcome." https://3dcarparts.org/library/2002/Toyota/Corolla/rear-seat-release-handle https://r2-upload.3dcarparts.workers.dev/file/parts/d22e84f2-0c62-4cc8-923f-246a50fe8392/images/rear-seat-release-handle-1_1777888926500_73p2tx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Toyota/Corolla/rear-seat-release-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-27a2a354-76bf-4186-9310-d5fb71864524 2009 Toyota Corolla Upper Glove Compartment 17mm Ball Mount "This is a 17mm ball mount which sandwiches into the upper glove compartment on a 2009-2013 Toyota Corolla. This can be used with a phone or GPS mount that is designed to attach using this sort of ball mount.
Because cars get hot in the sun in the summer, this really needs to be printed in PETG or ABS. The walls are quite thin, as they needed to be able to fit within the existing panel gaps, so it isn't really meant to hold a ton of weight. Should be fine for a phone, GPS, or similar. Probably wouldn't use this to attach a tablet.
This is just the mounting ball, but there are actual clips to hold the phone elsewhere on thingiverse, or you could buy something like this:
https://www.amazon.com/VizGiz-Replacement-Gooseneck-Broadcast-Attachment/dp/B09YXR54ZT/ref=sr_1_14?sr=8-14" https://3dcarparts.org/library/2009/Toyota/Corolla/upper-glove-compartment-17mm-ball-mount https://r2-upload.3dcarparts.workers.dev/file/parts/27a2a354-76bf-4186-9310-d5fb71864524/images/upper-glove-compartment-17mm-ball-mount-1_1777888923316_je38m7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Toyota/Corolla/upper-glove-compartment-17mm-ball-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-273a5ab9-de53-4b6a-9d8a-2589c28cc4cc 2011 Honda CR-Z Rearview Camera Bracket "(Model has been updated as of 04/17/2026. I've added an extra feature to help the camera face straight backwards. All previous suggestions are still valid.)
(Model has been updated as of 8/17/25. Print on the rear flat surface. The model will be slanted, yet requiring less support and resulting in a higher durability. I have added small ribs next to the camera to further increase durability. )
Default is '30D'. 30 Degrees.
Print with 5 walls, increase that if raising to a steeper degree. 40 degrees requires 7 walls. Print with hybrid tree supports, painting support on the screw holes on the lower face. Supports on the pop-clip holes is entirely optional. Near-zero cleanup work required.
Print on the flat back surface. All other orientations are inferior.
This is a copied version of the OEM rearview camera bracket for the CR-Z. Minor changes made to allow for easier printing.
I intend for this to be used with a 24mmx24mmx30mm style camera. My camera was approximately 30mm long (T'eyes) however, shorter cameras may still work. Mounting is utilizing the two screws. I think this may be a universal mounting style adopted by most rearview cameras, including the OEM rearview camera. All CR-Z bumpers have the cutout to use it. Use a pop clip to install. The latest model has an alignment tooth (2026:""and a rounded feature"") that actually clicks into place in the non-popclip hole. It works quite well.
Provide feedback! I will take your feedback to modify the model." https://3dcarparts.org/library/2011/Honda/CR-Z/rearview-camera-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/273a5ab9-de53-4b6a-9d8a-2589c28cc4cc/images/rearview-camera-bracket-1_1777888879117_nx50rj.jpg in_stock 9.84 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2011/Honda/CR-Z/rearview-camera-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e5d39e4d-13c7-4c0e-bb84-56ba7534ad25 2001 Toyota Camry Antenna Gear Antenna gear for Toyota Camry (XV30) https://3dcarparts.org/library/2001/Toyota/Camry/antenna-gear https://r2-upload.3dcarparts.workers.dev/file/parts/e5d39e4d-13c7-4c0e-bb84-56ba7534ad25/images/antenna-gear-1_1777888875382_8c6hby.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Toyota/Camry/antenna-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-90cb699e-802f-455c-9074-806e4204eac6 1998 Toyota Camry Sun Visor Mirror Assembly "*2016-03-18 Updated the hinge protrusions on the cover to add strengthening holes, also reduced height by 1mm to reduce stress on opening.*
A replacement driver's side sun visor mirror assembly for a 1998 Toyota Camry.
Uses original springs and mirror though it could be modified to not need them.
The legs on the back of the cover may need some modification to work smoothly.
To remove the original assembly I found it easiest to insert a putty knife from the bottom recess and pry upwards until the attachment clips unhook. They hook over a diamond feature that Appears to be a clear plastic embedded in the foam.
Also when removing or inserting the mirror I found it helpful to briefly dip the end of the parts in hot water to make it more malleable." https://3dcarparts.org/library/1998/Toyota/Camry/sun-visor-mirror-assembly https://r2-upload.3dcarparts.workers.dev/file/parts/90cb699e-802f-455c-9074-806e4204eac6/images/sun-visor-mirror-assembly-1_1777888867869_bjywva.jpg in_stock 13.24 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Toyota/Camry/sun-visor-mirror-assembly?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-80309693-d0a3-4656-a3a5-a00e3695f098 2002 Toyota Camry Cup Holder Separator I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the factory part in order to function once the lid has been compromised. I have yet to try a lower resolution/higher infil print, but keep in mine it has to flex quite a bit to be slipped into the 2 mounting holes on either side of the cup holder lid properly. Designed to be printed horizontally. https://3dcarparts.org/library/2002/Toyota/Camry/cup-holder-separator https://r2-upload.3dcarparts.workers.dev/file/parts/80309693-d0a3-4656-a3a5-a00e3695f098/images/cup-holder-separator-1_1777888862464_f95yi1.jpg in_stock 7.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Toyota/Camry/cup-holder-separator?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-efc48b6f-a00c-4aa9-b26f-064e4bf680aa 2015 Toyota Camry Oil Filter Cap Wrench https://www.youtube.com/watch?v=KfLIahVJ5Dg https://3dcarparts.org/library/2015/Toyota/Camry/oil-filter-cap-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/efc48b6f-a00c-4aa9-b26f-064e4bf680aa/images/oil-filter-cap-wrench-1_1777888856192_pvnjaz.jpg in_stock 20.69 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2015/Toyota/Camry/oil-filter-cap-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5d00c853-09b9-4205-9e5d-827b08f2f64a 1992 Toyota Camry Radio Knobs These are the two radio knobs for 92-96 Toyota Camry Radio (could be more) that keep breaking. Nothing special with the design, just functional. https://3dcarparts.org/library/1992/Toyota/Camry/radio-knobs https://r2-upload.3dcarparts.workers.dev/file/parts/5d00c853-09b9-4205-9e5d-827b08f2f64a/images/radio-knobs-1_1777888850534_0contp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1992/Toyota/Camry/radio-knobs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54b25876-2636-4115-8770-796a7f5bf7d0 1985 Toyota Camry Headlight Bulb Retainer "Designed and printed this replacement for a friend's 88 Camry. Worked great. Should also work for the following models/years but I haven't tested it on them.
MAZDA 323 (1986 - 1987)
MERCURY TRACER (1987 - 1989)
TOYOTA CAMRY (1985 - 1991)
TOYOTA COROLLA (1986 - 1988)
TOYOTA CRESSIDA (1985 - 1988)
TOYOTA TERCEL (1986 - 1990)" https://3dcarparts.org/library/1985/Toyota/Camry/headlight-bulb-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/54b25876-2636-4115-8770-796a7f5bf7d0/images/headlight-bulb-retainer-1_1777888846953_h2samq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1985/Toyota/Camry/headlight-bulb-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d26044d-540e-4ea1-947d-f5391f11a535 1998 Toyota Camry Alloy Wheel Hub Cover "A replacement alloy wheel hub cover for a 1998 Toyota Camry.
Needs to be sanded smooth and painted with a metallic spray paint after printing to match the wheel.
I also used some pieces of adhesive craft foam to improve the contact between the locking tabs and the wheel." https://3dcarparts.org/library/1998/Toyota/Camry/alloy-wheel-hub-cover https://r2-upload.3dcarparts.workers.dev/file/parts/4d26044d-540e-4ea1-947d-f5391f11a535/images/alloy-wheel-hub-cover-1_1777888843434_h1ojtb.jpg in_stock 18.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Toyota/Camry/alloy-wheel-hub-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1b9dac9b-414e-4b80-bd00-04936c108bd9 2004 Toyota Camry Radio Antenna Mast Retainer Removal Wrench "This was made to remove the special retainer of my Toyota Camry radio antenna mast. The special retainer has to be removed with special factory tools.
With this tool, the job is easily done.
There are many retainers in different shape on the market. This one fits my Japan version 2004 Toyota Camry. I hope it will fit yours too." https://3dcarparts.org/library/2004/Toyota/Camry/radio-antenna-mast-retainer-removal-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/1b9dac9b-414e-4b80-bd00-04936c108bd9/images/radio-antenna-mast-retainer-removal-wrench-1_1777888838895_emawj8.jpg in_stock 10.22 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2004/Toyota/Camry/radio-antenna-mast-retainer-removal-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b0c0a7a0-e9f5-40b2-94b0-56be91dd04eb 2012 Toyota Camry Oil Filter Wrench Removal Tool Should work with Toyota Camry 2012-2015 oil filter housing and any filters that match the diameter and the fluke count. https://3dcarparts.org/library/2012/Toyota/Camry/oil-filter-wrench-removal-tool https://r2-upload.3dcarparts.workers.dev/file/parts/b0c0a7a0-e9f5-40b2-94b0-56be91dd04eb/images/oil-filter-wrench-removal-tool-1_1777888834960_biw1t3.jpg in_stock 25.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2012/Toyota/Camry/oil-filter-wrench-removal-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-81b38b3b-1eab-49a4-a10a-59d15d584d32 2018 Toyota Camry Speaker Adapter I modeled these adapters after the factory speakers to fit a 6.5 inch speaker. I included the fusion 360 files if someone wants to fit other speaker sizes. https://3dcarparts.org/library/2018/Toyota/Camry/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/81b38b3b-1eab-49a4-a10a-59d15d584d32/images/speaker-adapter-1_1777888829154_5v54hs.jpg in_stock 40.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Toyota/Camry/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-654ad368-ab6c-4182-bd86-d63f8b7e67fb 2002 Toyota Camry Wheel Center Cap "Wheel center cap for Toyota Camry 30.
Size:
External diameter 62 mm; internal diameter 52 mm; height 30 mm; depth 24,5 mm." https://3dcarparts.org/library/2002/Toyota/Camry/wheel-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/654ad368-ab6c-4182-bd86-d63f8b7e67fb/images/wheel-center-cap-1_1777888825166_zjmmiu.jpg in_stock 10.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Toyota/Camry/wheel-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7cb7a11a-669b-4cf8-8276-89b653356635 2016 Toyota Camry Fuse Box Lid Spacer "I tried to install a new dashcam in my Toyota Camry 2016 and found that I cannot use ""add-a-circuit kit"" in instrumental panel fuse box as its lid sits too close to the fuses.
I've found the **euggie**'s design, but decided to create a spacer instead (to keep the original fuse box lid that has a diagram).
Notice: the original design is for Camry 2012. I have Camry 2016 (ASV50R) and its fusebox has the same size.
STEP file included.
Black on pictures - printed in ABS. Grey on pictures - printed in PETG (old design).
03 Mar 2024: I re-designed the spacer so no supports required any longer and it is easier to print in ABS.
P.S. I've connected my dashcam into ""S/Roof"" (battery+) and into a free slot between ""Tail"" and ""EPS-IG1"" (ACC)." https://3dcarparts.org/library/2016/Toyota/Camry/fuse-box-lid-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/7cb7a11a-669b-4cf8-8276-89b653356635/images/fuse-box-lid-spacer-1_1777888820292_r0ehhx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2016/Toyota/Camry/fuse-box-lid-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-785dbe02-40ca-428d-8742-db0bf598db22 1996 Toyota T100 Dimmer Knob "This knob allows a spline-shaft potentiometer (normal for LED bulb dimmers) to used in place of the square-dive rheostat control. This was made for a 1996 T100, but it should be good for most early-generation Tacomss, 4Runners, and Hilux pickups.
Designed in Blender, files included. Logo version has the dimmer logo, plain version is... plain.
Feel free to remix, modify, and enjoy!" https://3dcarparts.org/library/1996/Toyota/T100/dimmer-knob https://r2-upload.3dcarparts.workers.dev/file/parts/785dbe02-40ca-428d-8742-db0bf598db22/images/dimmer-knob-1_1777888815395_h96raq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Toyota/T100/dimmer-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e506adbe-a392-4c2f-8577-54125b127adf 1996 Toyota 4Runner Rear Speaker Plate This is a plate that is designed for the rear speakers of the 3rd Gen 4Runner. These were specifically designed for the JVC CS-J620 Speakers but most 6.5 inch car speakers should work. The only extra part you will need is a slightly longer screw that goes through the speaker and plate before attaching to the door panel itself (I don't know the name of the screw). As for the connector that you have to take off of the original plate, you should be able to mount that anywhere that isn't metal/touching metal (I used carpet tape and mounted it to the plastic sheet that covers the whole door). If you do go with the same speakers that I did and care about your sound, I would highly recommend adding a subwoofer of some kind - those speakers have great treble but no bass at all. https://3dcarparts.org/library/1996/Toyota/4Runner/rear-speaker-plate https://r2-upload.3dcarparts.workers.dev/file/parts/e506adbe-a392-4c2f-8577-54125b127adf/images/rear-speaker-plate-1_1777888303003_roe3v8.jpg in_stock 22.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Toyota/4Runner/rear-speaker-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d8e37fe4-40ad-43d5-bce5-f00b03723ca1 2006 Toyota Corolla Carpet Clip "So... This is a carpet clip (sorry if it means other in English) for my Toyota Corolla E150.
I bought a lot of them instead of lost ones during car washing, before made this model. Leave a comment please if it doesn't suit well, maybe my capret clip hole is wider due to perennial use.
Don't forget to use supports! Position on table is shown among pics.
Here is my PayPal, if I helped you so much:
https://paypal.me/AlexChoodoff" https://3dcarparts.org/library/2006/Toyota/Corolla/carpet-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d8e37fe4-40ad-43d5-bce5-f00b03723ca1/images/carpet-clip-1_1777888299233_vlawyx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Toyota/Corolla/carpet-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-65f2f3fd-09a2-453c-89e9-424b6c1e3138 2010 Toyota 4Runner Cubby Phone Holder "This phone holder is designed to fit in the small cubby located in front of the driver cupholder in a 5th Gen Toyota 4Runner.
The goal was to create a simple mount that keeps your phone accessible while driving without blocking the cupholders.
The back of the phone holder is intentionally open to allow MagSafe accessories such as wallets or battery packs to remain attached when placing the phone in the mount.
Current Design
Features included in this design:
Phone holder
Mount designed to fit the factory cubby location
Open back for MagSafe compatibility
Fitment in the cubby works fairly well but the design could definitely use refinement.
Known Issues
This design is not perfect yet and I am sharing it early so others can help improve it.
Current issues include:
Base may tilt forward depending on phone weight
Phone holder can loosen at the pivot
Overtightening the screw can break the mount
Overall stability could be improved
Remix Encouraged
If you improve the design please upload your remix and link back to this model so others can benefit.
Potential improvements:
Stronger pivot mount
Better base stability
Adjusted phone viewing angle
Improved screw mounting method
License
This model is released under the Creative Commons Attribution ShareAlike (CC-BY-SA) license.
You are welcome to:
Remix and improve the design
Modify the model
Print and sell prints
Use commercially
Requirements:
Credit the original design
Any remix must be released under the same CC-BY-SA license
The goal is to encourage community improvements while keeping the design open." https://3dcarparts.org/library/2010/Toyota/4Runner/cubby-phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/65f2f3fd-09a2-453c-89e9-424b6c1e3138/images/cubby-phone-holder-1_1777888290360_zvwg9f.jpg in_stock 29.68 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/cubby-phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b02acf55-caf0-4096-b28d-23648d62bf37 1994 Toyota RAV4 Rocker Switch Holder "Rocker Switch holder created for Toyota RAV4 1994-2000 (XA10), to replace the original without damaging it. Can likely be used for other Toyotas in the same age range. Used for hlding a rocker switch for controlling LED spot-lights, winch, etc.
Important dimesions:
Holder Blank: 42.5 x 24.5mm (Toyota Part)
Switch: 19.5 x 12.5mm
Switch I used:
https://www.automarine.co.za/rocker-switches/5566-rocker-switch-blue-mini.html?sfdr_ptcid=43178_617_684616428&sfdr_hash=5eb1eef555720846d0650b797a3e3909
Here is the source for the design which you can modify the parameters of to fit your switch:
https://cad.onshape.com/documents/1245b9ca769e6a02c4775b9c/w/de9cc3d46b3da11500259323/e/2cd1a716249528c5a5c47bf1
Parameters to change: height_switch & width_switch
Printing:
I found laying to the side was the best for strength in the moving clip parts which take a bit of strain when inserted. The layers create a wood like grain effect on the front of the holders face" https://3dcarparts.org/library/1994/Toyota/RAV4/rocker-switch-holder https://r2-upload.3dcarparts.workers.dev/file/parts/b02acf55-caf0-4096-b28d-23648d62bf37/images/rocker-switch-holder-1_1777888285596_tntu8h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Toyota/RAV4/rocker-switch-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c9693770-45c3-41cb-96ae-c6dc4350e45a 2010 Toyota 4Runner Door CTR Pillar Moulding and Stub "OE/OEM Part Number
75755-35020, 75755" https://3dcarparts.org/library/2010/Toyota/4Runner/door-ctr-pillar-moulding-and-stub https://r2-upload.3dcarparts.workers.dev/file/parts/c9693770-45c3-41cb-96ae-c6dc4350e45a/images/door-ctr-pillar-moulding-and-stub-1_1777888282236_k0vz13.jpg in_stock 29.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Toyota/4Runner/door-ctr-pillar-moulding-and-stub?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-92babdfb-09d2-4373-81b4-00329b5772d8 1996 Toyota 4Runner PCV Valve Insertion Tool "I have a 96 4runner that recently needed the PCV valve changed. The new grommet was so tight and the space to get your hand on the valve so small that I could not get the valve into the valve cover. I whipped up this ""thingy"" the help insert the PCV valve and allow you to get enough leverage the easily push it into the valve cover without breaking the new valve.I i rounded the top to make it easier on your hand and the inside is stepped to fit the PCV valve for the Toyota 5VZE 3.4 motor." https://3dcarparts.org/library/1996/Toyota/4Runner/pcv-valve-insertion-tool https://r2-upload.3dcarparts.workers.dev/file/parts/92babdfb-09d2-4373-81b4-00329b5772d8/images/pcv-valve-insertion-tool-1_1777888278862_93uzz6.jpg in_stock 18.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1996/Toyota/4Runner/pcv-valve-insertion-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f9ed58ee-79cd-412a-a433-0bc0590a7ef8 2000 Toyota Camry Door Lock Rod Clip "3D printer to the rescue once again. Two nights ago as I was getting in to my car (2000
Toyota Camry) in the freezing cold, I lifted the handle and nothing happened. Got in
through the passenger side and started home, once home I took a quick look, the door
handle rod had dislodged from handle, fortunately the handle looked intact. Forward to
today, I finally get the door apart and see that the lock rod clip(the yellow thing) is broken
and so the rod won't stay in place.
Although you can get an assortment of the parts for about 5-8 dollars (Dorman Door Lock
Rod Clips 75474), no one has them in stock, so that would mean 3-5 more days of going
through the passenger side to open the driver door from inside. After about 45 minutes of
measuring and designing and then 3 hours of printing, the problem is solved for now. I'll
probably have to have someone else print some in ABS for the summer, but for now the
flexible filament seems to be doing the job.
11/14/22 Just got this info from ChaseBot_T800 on Thingiverse. They suggested I add this here, I agree.
For anyone who needs the part interchange cross-reference information:
Application - Connects to Convertible Soft Top Cable 06-10 Pontiac Solstice 07-10 Saturn Sky (Cable OEM part # 19120272)
OEM Part # 15290793 (Folding Top Pulldown Actuator Bushing - GM) (Convertible Top Actuator Clip Holder)
Interchange:
Dorman 75452 Door Lock Rod Clip
Dorman 75455 Lock Rod Clip" https://3dcarparts.org/library/2000/Toyota/Camry/door-lock-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f9ed58ee-79cd-412a-a433-0bc0590a7ef8/images/door-lock-rod-clip-1_1777888275542_l1q0x8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Toyota/Camry/door-lock-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1f3be2e9-1b10-4733-8c1a-11e79d630536 1984 Toyota 4Runner Rear Cup Holder This is a cupholder that mounts to the hardtop bolts in the back of a first-gen 4Runner, holds beer cans or bottles. The two pieces bolt together with an m4x12 machine screw and I also used some superglue for added stiffness. Objects will need to be rotated to print. https://3dcarparts.org/library/1984/Toyota/4Runner/rear-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/1f3be2e9-1b10-4733-8c1a-11e79d630536/images/rear-cup-holder-1_1777888270469_qzj5n8.jpg in_stock 17.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Toyota/4Runner/rear-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-31ae9348-c42d-45b7-91b3-044a06762f63 1990 Toyota Sera JDM Signal Flare Clip "This is a replacement clip for the JDM signal flare fitted to Toyota Sera's ( and presumably any other Toyota import of a similar vintage ).
Print it on it's side with supports enabled.
Any tweaks or changes needed then please let me know" https://3dcarparts.org/library/1990/Toyota/Sera/jdm-signal-flare-clip https://r2-upload.3dcarparts.workers.dev/file/parts/31ae9348-c42d-45b7-91b3-044a06762f63/images/jdm-signal-flare-clip-1_1777888265157_cuof8e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Toyota/Sera/jdm-signal-flare-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d843762b-7213-4195-b7a8-05a3f29e4980 1990 Toyota 4Runner 175A Quick Disconnect Brace "brace/spacer/lock to add a 175A quick disconnect to the grill of a 90-95 4Runner
added an angle for the rear connector, but opted for....
added a spacer to mount the rear QD connector underneath." https://3dcarparts.org/library/1990/Toyota/4Runner/175a-quick-disconnect-brace https://r2-upload.3dcarparts.workers.dev/file/parts/d843762b-7213-4195-b7a8-05a3f29e4980/images/175a-quick-disconnect-brace-1_1777888256318_hhgk16.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1990/Toyota/4Runner/175a-quick-disconnect-brace?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-193b3773-02dd-4f84-b51d-dba769ebdcfd 1996 Toyota 4Runner Trunk Strut Bushing "These are just a simple design for spacers for your trunk struts to replace the worn out bushings. This is made specifically for a 3rd generation 4runner. Specifically, the Strong Arm 4286 struts, as long as the spacing is the same, these should work.
I recommend using PETG just so it doesn't deform in hot environments. It printed in about 18minutes on a Bambu P1S and overall cost is about 15 cents in filament.
For each side you'll need:
1x TopBushingInner
1x TopBushingOuter (the outer one is thicker and goes on the side facing into the trunk)
Either 2x MainBTMBushings1-2Hole or 2x PrototypeBTMBushing7-16Hole.
The main difference is that the prototype has tighter tolerances by 1/16inch however, I haven't been able to check if it would work. The main version is tested and work.
In total you'll need
For top sides of the struts:
2x TopBushingInner
2x TopBushingOuter
For bottom side of the struts:
4x MainBTMBushings1-2Hole or 4x PrototypeBTMBushing7-16Hole" https://3dcarparts.org/library/1996/Toyota/4Runner/trunk-strut-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/193b3773-02dd-4f84-b51d-dba769ebdcfd/images/trunk-strut-bushing-1_1777888249652_mw69fc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1996/Toyota/4Runner/trunk-strut-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ca5a2894-e8b4-4c21-ac8f-c4802d1796c6 1999 Toyota MR2 Luggage Clip & Hinge "Made the holes a little bigger and also added the hinge part. I don't know if this normally breaks, but that part was broken when I bought the car. So here it is :)
Print the hinge as is. It has a flat bottom." https://3dcarparts.org/library/1999/Toyota/MR2/luggage-clip-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/ca5a2894-e8b4-4c21-ac8f-c4802d1796c6/images/luggage-clip-hinge-1_1777888244676_trtfvg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1999/Toyota/MR2/luggage-clip-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4455dd29-0241-4eea-a918-29587e76ad36 2000 Toyota MR2 Spyder Support Rod Retainer "works the same as this: https://www.thingiverse.com/thing:2633948
for TOYOTA MRS/MR2 spyder ZZW30
I tried his model and it cracked when tried to put the rod in (thx for sharing btw), so I created mine.
it's a lot more flexible so it doesn't crack that easily:)
Print flat side down, 100 fill and thick wall.
check the layers all material should be printed as ""WALL"" (no zigzags)
rod diameter: 8mm
chassis cutout size: 11.4 x 7mm" https://3dcarparts.org/library/2000/Toyota/MR2%20Spyder/support-rod-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/4455dd29-0241-4eea-a918-29587e76ad36/images/support-rod-retainer-1_1777888241158_cigryz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2000/Toyota/MR2%20Spyder/support-rod-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d2b0714a-45ae-4b9f-b923-c77263743554 2010 Toyota 4Runner Rear Dash Cam Mount "This mount provides a flat mounting surface for a variety of dash cams. Simply remove the center headliner clip and replace it with a M6x20mm screw/bolt.
The hole in the headliner support bracket is not threaded so push hard while screwing in until the screw starts to create its own threads, once snug you should be good to go. (Screw will always free spin if you over-tighten but should still be plenty strong enough)" https://3dcarparts.org/library/2010/Toyota/4Runner/rear-dash-cam-mount https://r2-upload.3dcarparts.workers.dev/file/parts/d2b0714a-45ae-4b9f-b923-c77263743554/images/rear-dash-cam-mount-1_1777888237392_od49hq.jpg in_stock 11.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2010/Toyota/4Runner/rear-dash-cam-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a6c2f814-38af-4772-ae46-1dc793ff591c 2000 Toyota MR2 Spyder Hood Prop Clip "Model for the engine lid prop clip that always breaks on MR2 Spyders (apparently its used on lots of other Toyotas too, the part number is TOY-90959-01136). I'm selling prints of these on Spyderchat.com if you don't have access to a 3D printer. My username there is Saab_Story.
Designed in Tinkercad
The print was a little large when I printed it, so a very small amount of sanding may need to be done to get the dimension of the short side in tolerance." https://3dcarparts.org/library/2000/Toyota/MR2%20Spyder/hood-prop-clip https://r2-upload.3dcarparts.workers.dev/file/parts/a6c2f814-38af-4772-ae46-1dc793ff591c/images/hood-prop-clip-1_1777888234423_74j2wr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2000/Toyota/MR2%20Spyder/hood-prop-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-88fa98c0-8a30-430a-9bb1-1eedc29528fb 1996 Toyota 4Runner Center Console Armrest Hinge Limiter "Center console hinge limiters for 3rd generation 4Runners.
Drivers side provided. Mirror the part in your slicer for the passenger side.
Toyota part numbers:
58964-16010 5896416010
58965-16010 5896516010" https://3dcarparts.org/library/1996/Toyota/4Runner/center-console-armrest-hinge-limiter https://r2-upload.3dcarparts.workers.dev/file/parts/88fa98c0-8a30-430a-9bb1-1eedc29528fb/images/center-console-armrest-hinge-limiter-1_1777888231306_om7hzb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Toyota/4Runner/center-console-armrest-hinge-limiter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1a042a5c-92fd-42be-ba0b-0d2d8e4f487b 2010 Toyota 4Runner iPhone Wireless Charger Holder "Edit: Also works with iPhone 15Pro Max.
This is a holder for my iPhone 14Pro Max. It has a spot for an Apple wireless charging puck. It fits my 5th generation Toyota 4Runner. I use 3M double sided tape to hold the wireless puck on. I have a wireless CarPlay dongle, so with this setup, I don't have to plug my phone into anything, and I get wireless charging and CarPlay.
I used to put my phone and wireless charger in the same space before I made this. It fit very loosely. When I accelerated, the phone would tip over towards the cup holder and the charger would come off. When I made right turns, the phone would tip lip left and the charger would come off. Now it stays put (at least during normal driving).
I have no doubt this could be made more elegantly, but I have 0% CAD experience. I used Tinkercad to mash up two files I found here. It could be made to route the cable down the back, and after drilling some small holes into the 4Runner plastic, you would not even see the cable." https://3dcarparts.org/library/2010/Toyota/4Runner/iphone-wireless-charger-holder https://r2-upload.3dcarparts.workers.dev/file/parts/1a042a5c-92fd-42be-ba0b-0d2d8e4f487b/images/iphone-wireless-charger-holder-1_1777888227626_sus40f.jpg in_stock 28.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/iphone-wireless-charger-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54145b4f-3ce4-4ce4-8b66-9b3ce8239581 1990 Toyota Hilux USB/AUX Dash Port This was made to fit a 1990 Hilux, but I'm sure it will fit other 90's toyotas. I bought a usb/aux extension for my radio off amazon and obviously it didn't fit my car, so I just used the wires and retainer and redesigned the front to fit. Hope this helps someone else trying to do an upgrade to their old yota! https://3dcarparts.org/library/1990/Toyota/Hilux/usbaux-dash-port https://r2-upload.3dcarparts.workers.dev/file/parts/54145b4f-3ce4-4ce4-8b66-9b3ce8239581/images/usbaux-dash-port-1_1777888223080_bdlbbf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Toyota/Hilux/usbaux-dash-port?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-766c2eef-9e24-41f0-a0d4-9e50e6093c97 2019 Toyota Corolla Head Unit Clip clip of toyota corolla 2019 head unit. https://3dcarparts.org/library/2019/Toyota/Corolla/head-unit-clip https://r2-upload.3dcarparts.workers.dev/file/parts/766c2eef-9e24-41f0-a0d4-9e50e6093c97/images/head-unit-clip-1_1777888219288_hmduu3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Toyota/Corolla/head-unit-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9e16931e-d502-4f13-909f-86ba7ba14fc6 1997 Toyota Carina Grille Clip Its a grille clip for the 97 toyota carina. https://3dcarparts.org/library/1997/Toyota/Carina/grille-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9e16931e-d502-4f13-909f-86ba7ba14fc6/images/grille-clip-1_1777888214963_ye4kpc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Toyota/Carina/grille-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1f3b734-ad15-4061-884b-8ba439bd6022 2008 Toyota IQ Carpet Mat Holder "This is a carpet mat clip for a Toyota IQ, might also fit other models.
Toyota OEM part: PZ410I035002" https://3dcarparts.org/library/2008/Toyota/IQ/carpet-mat-holder https://r2-upload.3dcarparts.workers.dev/file/parts/b1f3b734-ad15-4061-884b-8ba439bd6022/images/carpet-mat-holder-1_1777888210432_42herz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Toyota/IQ/carpet-mat-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7a6be371-5c10-4ee2-8243-a3aae64e144e 2003 Toyota Prius Center Console Drink Holder Clip "A replacement for the clips that hold the back-seat drink holder onto the center console in the second-generation Toyota Prius (2003 - 2009).
While these appear to work in PLA, it isn't well-suited for the inside of a car, as the heat causes it to degrade. PETG and nylon are too soft to work satisfactorily. I ended up printing mine out of polycarbonite." https://3dcarparts.org/library/2003/Toyota/Prius/center-console-drink-holder-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7a6be371-5c10-4ee2-8243-a3aae64e144e/images/center-console-drink-holder-clip-1_1777888207202_cefx3k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Toyota/Prius/center-console-drink-holder-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-55478110-1483-4614-a1a1-f12177d3ffdb 1989 Toyota 4Runner Cup Holder Adapter "This is an ADAPTER. it requires the lower portion of a t100 cupholder ($15 complete assembly on Amazon). beats the $90 hilux drop in replacement. Image shows which part is needed.
Simply order a t100 cupholder, print this part, remove the lower bracket from the t100 cupholder and install it onto the printed part. then it should slide right into the 2nd gen dash slot. it works great for me 2 years later.
Definitely room for improvement, especially aesthetically, adding some curves and getting the dimension perfect. I will not be doing all of that modelling but I welcome anyone else to try.
Print ABS/ASA/PC %100 infill.
SUPPORTS REQUIRED, paint on supports on the small clips over the rear edge as shown in picture. should be as easy to remove as possible." https://3dcarparts.org/library/1989/Toyota/4Runner/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/55478110-1483-4614-a1a1-f12177d3ffdb/images/cup-holder-adapter-1_1777888203956_g0qcyd.jpg in_stock 21.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Toyota/4Runner/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1d33d0b3-f644-4ebd-b651-7bed5d238332 1990 Toyota 4Runner Seat Backrest Tilt Adjustment Lever Replacement for backrest tilt adjustment lever, for left seat of 2nd gen 4runner. If you need the right seat, just mirror it in your slicer https://3dcarparts.org/library/1990/Toyota/4Runner/seat-backrest-tilt-adjustment-lever https://r2-upload.3dcarparts.workers.dev/file/parts/1d33d0b3-f644-4ebd-b651-7bed5d238332/images/seat-backrest-tilt-adjustment-lever-1_1777888180852_zkunpa.jpg in_stock 8.71 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Toyota/4Runner/seat-backrest-tilt-adjustment-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fe67f0fb-c26f-4bdd-adaf-72c602cebf37 1989 Toyota MR2 Door Speaker Adapter "This are adapters to fit 165mm speakers into the Toyota MR2 doors. They are designed as high as possible to fit relatively big speaker chassis behind the original doorboards without change the OEM look of the door.
You will have to trimm the plastic braces around the speaker at the backside of your doorboards to fit this adapters. No metalwork needed!
There is a left and a right version, marked with L and R at the backward mounting hole.
The mounting clips are also included, in case your old ones are messed up.
Since these things are used in a car, I recommand a heat-resistant material." https://3dcarparts.org/library/1989/Toyota/MR2/door-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/fe67f0fb-c26f-4bdd-adaf-72c602cebf37/images/door-speaker-adapter-1_1777888171014_qmwb3p.jpg in_stock 26.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Toyota/MR2/door-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ead955cd-8a32-4c65-896d-d09da7487e65 2005 Toyota Tacoma Head Unit Trim Clip "Had to lengthen and flatten the clip a bit to make it work for the Tacoma head unit bezel.
Gray PLA prototypes in picture were too short and would break or pop off into the dash.
Yellow cip is the original I found under the cup holders (same clip used) AFTER I finished installing the radio, lol.
Printed longer final version in ABS for more flexibility." https://3dcarparts.org/library/2005/Toyota/Tacoma/head-unit-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ead955cd-8a32-4c65-896d-d09da7487e65/images/head-unit-trim-clip-1_1777887504981_b5kifp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Toyota/Tacoma/head-unit-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6ed73bee-3d8b-435a-bc1d-a8606c171384 2016 Toyota Tacoma Retainer Clip tacoma retainer clip found on the moulding on 3rd gen tacomas and more toyota/lexus https://3dcarparts.org/library/2016/Toyota/Tacoma/retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/6ed73bee-3d8b-435a-bc1d-a8606c171384/images/retainer-clip-1_1777887501642_tndfd3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Toyota/Tacoma/retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-25f7015a-b1f5-4809-b252-bc2566826993 2000 Toyota Tacoma Lower Exterior Window Door Trim Clip I needed some exterior molding trim clips after restoring the lower window trim on the door of my 2000 Toyota Tacoma Prerunner. I designed this clip and printed them out. https://3dcarparts.org/library/2000/Toyota/Tacoma/lower-exterior-window-door-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/25f7015a-b1f5-4809-b252-bc2566826993/images/lower-exterior-window-door-trim-clip-1_1777887392826_yvbixs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Toyota/Tacoma/lower-exterior-window-door-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8c886eed-2bfd-48f2-a757-ecaf818cdb52 1996 Toyota Tacoma Headlight Access Panel Clip On the 1996-2000 Toyota Tacoma, an access panel below the headlight must be removed to remove the headlight housing, as shown in the picture. The small metal rectangular panel is held in position with a sheet metal screw and a plastic retention clip. It is very common for these to break. To fabricate, I scanned a broken part on a flat bed scanner. I then used The Gimp to create a path from a a selection of the outline. I then exported the path as in SVG using the path dialogue. After importing the path to Blender, I converted it to a mesh, and then used extrude and fill to create the object. I then fabricated the spring leaves and retention pin using Blender, and exported the part as an STL. Using Ultimaker, a Creality printer, and PETG, I printed two of the clips and now my access panels are looking smart again. https://3dcarparts.org/library/1996/Toyota/Tacoma/headlight-access-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8c886eed-2bfd-48f2-a757-ecaf818cdb52/images/headlight-access-panel-clip-1_1777887383518_rttusv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1996/Toyota/Tacoma/headlight-access-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e1e34701-bb3d-41ba-8894-a962a4c52bb6 1994 Toyota Pickup Door Handle Clip Replacement clip for my interior door handle in my 1994 Toyota Pickup. The part that broke was aftermarket. I got it off [ebay](https://www.ebay.com/itm/DOOR-HANDLE-for-Toyota-Pickup-Tacoma-Corolla-Front-Inside-Brown-Left-Driver-Side/131889835201?fits=Year%3A1994%7CMake%3AToyota%7CModel%3APickup&epid=1544343482&hash=item1eb53f2cc1:g:56MAAOSwvTpaBMZH&vxp=mtr). https://3dcarparts.org/library/1994/Toyota/Pickup/door-handle-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e1e34701-bb3d-41ba-8894-a962a4c52bb6/images/door-handle-clip-1_1777887379884_jtsaw7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Toyota/Pickup/door-handle-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b07ddee5-75bb-4059-9dd5-c9911ba174ec 2002 Toyota Tacoma Door Handle Button Cover "This is a cover that fits the holes for the screws that fasten the interior door handle. It works for my 2002 Tacoma. Please let us know if it fits other models.
""UP"" indicates the orientation of the button." https://3dcarparts.org/library/2002/Toyota/Tacoma/door-handle-button-cover https://r2-upload.3dcarparts.workers.dev/file/parts/b07ddee5-75bb-4059-9dd5-c9911ba174ec/images/door-handle-button-cover-1_1777887375628_qf0xw8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Toyota/Tacoma/door-handle-button-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1fc9f270-2bed-4f3c-89d1-3a46ece332c1 2010 Toyota 4Runner Rear Lower Panel Seat Clip Hello, this is a very quick print that I made when a clip in my 4Runner broke. This clip goes in the back, middle seat, on the rear lower panel of the 4Runner (I have a 2020 4Runner SR5, but I am sure it works in all 5th gen models). The supports are hard to remove on the two thin sections that are very close in the middle, but it does not need to be removed for it to still work. Hope this works well for you! https://3dcarparts.org/library/2010/Toyota/4Runner/rear-lower-panel-seat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/1fc9f270-2bed-4f3c-89d1-3a46ece332c1/images/rear-lower-panel-seat-clip-1_1777887371066_yb3kz2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/rear-lower-panel-seat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f15b702a-7c52-4289-836a-4f270b029e18 1966 Toyota Corolla Bonnet Moulding Clip "I recently purchased a KE10 Corolla project car. The bonnet moulding was inside the car and missing 4 out of 5 clips to hold it on, and I simply could not find an aftermarket replacement anywhere, so I knocked up these.
I hope they help other old Toyota enthusiasts.
Print with the rectangular base face down on your bed." https://3dcarparts.org/library/1966/Toyota/Corolla/bonnet-moulding-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f15b702a-7c52-4289-836a-4f270b029e18/images/bonnet-moulding-clip-1_1777887367629_gg4ety.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1966/Toyota/Corolla/bonnet-moulding-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0f43bdab-d110-46a3-bd51-173aaf61a953 2016 Toyota Tacoma Radio Knobs This is my first design ever. It took me 6 different variations to find out what worked best and actually fit properly. These should slip right on and be tight enough to do the job. I've downloaded so many files that need sanding or resizing so I hope this isn't one of them. Let me know any feedback or comments. https://3dcarparts.org/library/2016/Toyota/Tacoma/radio-knobs https://r2-upload.3dcarparts.workers.dev/file/parts/0f43bdab-d110-46a3-bd51-173aaf61a953/images/radio-knobs-1_1777887364182_zzzj0y.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Toyota/Tacoma/radio-knobs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-086d6b47-0b62-4c83-9090-f9df42bd7eab 2003 Toyota Tacoma Passenger Side Interior Door Handle Latch Cable Clip "Replacement for the plastic clip that helps attach the interior door handle to the latch cable on the passenger side of a 2003 Toyota Tacoma.
Created in MatterHackers MatterControl 2" https://3dcarparts.org/library/2003/Toyota/Tacoma/passenger-side-interior-door-handle-latch-cable-clip https://r2-upload.3dcarparts.workers.dev/file/parts/086d6b47-0b62-4c83-9090-f9df42bd7eab/images/passenger-side-interior-door-handle-latch-cable-clip-1_1777887361058_4f0c68.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Toyota/Tacoma/passenger-side-interior-door-handle-latch-cable-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-29f4a471-0ca6-45b6-bf80-2a07317c6842 2008 Toyota Tacoma Floor Mat Clip This is a remix that reduces the width of the hook that goes into the floor mat. My use is for a 2008 Toyota Tacoma and the holes were too small to work with the clip. https://3dcarparts.org/library/2008/Toyota/Tacoma/floor-mat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/29f4a471-0ca6-45b6-bf80-2a07317c6842/images/floor-mat-clip-1_1777887357645_y56wy0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Toyota/Tacoma/floor-mat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5528a43c-03ab-4db8-8692-a36be402f7f4 1995 Toyota Tacoma Front Grille Clips Front grill clips for 1st generation Toyota Tacoma https://3dcarparts.org/library/1995/Toyota/Tacoma/front-grille-clips https://r2-upload.3dcarparts.workers.dev/file/parts/5528a43c-03ab-4db8-8692-a36be402f7f4/images/front-grille-clips-1_1777887353305_7qtnsb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1995/Toyota/Tacoma/front-grille-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-44b0723e-007d-40b1-94a6-d60d231d0cf7 2016 Toyota Tacoma AC Vent Ring "AC vent ring chrome delete for 2016-2023 Toyota Tacoma middle chrome piece.
Clip on/ pressure fitting.
One time use as the legs will almost always break if you try to remove it. I tried making it a solid ring on the outside but it wouldn't press in.
Made from PLA or PETG and both seem about the same. PLA may warp or fade over time.
THIN WALLS. On bambu studio I had to turn on *detect thin walls*. Make sure to check your sliced plate to see if the legs are there.
I just threw a bunch of cylinders together and printed over and over to get the perfect fit in my opinion. I also printed in black and ""painted"" the face blue for my final product. Can be printed in a solid color as well." https://3dcarparts.org/library/2016/Toyota/Tacoma/ac-vent-ring https://r2-upload.3dcarparts.workers.dev/file/parts/44b0723e-007d-40b1-94a6-d60d231d0cf7/images/ac-vent-ring-1_1777887349455_dx1l3o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Toyota/Tacoma/ac-vent-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-562d8217-657c-4287-96ba-164ccc6fb240 2001 Toyota Tacoma Side Marker Light Clips Toyota 53138-04010 side marker light clips for 2001-2004 Tacoma. Recommended print material Nylon (original) or PETG, do not use PLA as it will not withstand large temperature swings. https://3dcarparts.org/library/2001/Toyota/Tacoma/side-marker-light-clips https://r2-upload.3dcarparts.workers.dev/file/parts/562d8217-657c-4287-96ba-164ccc6fb240/images/side-marker-light-clips-1_1777887344976_rjfy3j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2001/Toyota/Tacoma/side-marker-light-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5672a3bf-ec7e-4f11-bd39-c46623b430de 2015 Toyota Tacoma Vent Cup Holder "I have a 2015 Toyota Tacoma.
It has a cup holder, but I wanted to try to keep my drink cool.
I remixed this cup holder to fit my Tacoma, and added some guides on the sides to help direct the air to the drink. I don't have a top cover or a rounded cover for the open back side of the bottle. But it seems to work.
Instead of screws I straightened out some paper clips and jammed those through the holes.
Printed with my standard ABS setting on my DaVinci Pro.
I modified the top holder so it will accept a gps mount.
Dual purpose!" https://3dcarparts.org/library/2015/Toyota/Tacoma/vent-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5672a3bf-ec7e-4f11-bd39-c46623b430de/images/vent-cup-holder-1_1777887335655_u07w4l.jpg in_stock 9.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Toyota/Tacoma/vent-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ef0e4bf8-6801-4ea1-b6b2-b5e51a83cdf4 2010 Toyota Prius Head Unit Mounting Bracket "The standard KINGBEATS K2+ for the 2010 Toyota Prius ZVW30 is mounted onto the radio frame using an adapter frame. Both frames are equipped with clips. However, this standard adapter frame didn’t fit into the radio frame. I had to trim the adapter frame and its clips slightly. This resulted in the adapter frame falling through the radio frame. So, I decided to print the mounting based on the standard metal mounting that comes with the head unit.
My model is for the right-side mounting. The left-side mounting is symmetrical, so you would have to mirror my model. I printed my mounting using supports. The orientation of the mounting model is presented on the screen shots from Ultimaker Cura attached below.
I’m sharing this model with you, guys. Hope it’ll be of use." https://3dcarparts.org/library/2010/Toyota/Prius/head-unit-mounting-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/ef0e4bf8-6801-4ea1-b6b2-b5e51a83cdf4/images/head-unit-mounting-bracket-1_1777887332416_hxqkp4.jpg in_stock 17.94 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2010/Toyota/Prius/head-unit-mounting-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8cb2a25e-4b4b-4801-b0f6-d98a88b789c7 1996 Toyota 4Runner Visor Clip "3rd Gen Toyota 4Runner Visor Clip.
Printed on its side with tree supports at 0.20mm layer height and 3 walls. 20% infill." https://3dcarparts.org/library/1996/Toyota/4Runner/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8cb2a25e-4b4b-4801-b0f6-d98a88b789c7/images/visor-clip-1_1777887315444_faoezo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Toyota/4Runner/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-be3e4540-f628-4046-b124-1a408ae0e1f0 2010 Toyota 4Runner Rear Dashcam Mount "Designed a dashcam mount for the Viofo A129 Pro Duo rear camera, to be screwed into the center upholstery pin of a Toyota 4Runner with an M6x20 Bolt. Curves to the roof to keep it straight, almost no movement whatsoever of the camera. Camera fits in VERY tightly, adhesive use is unnecessary.
Recommended to print with a resin printer, FDM is theoretically possible but awkward with supports. Almost any material would be viable though PLA is obviously dangerous in a hot car." https://3dcarparts.org/library/2010/Toyota/4Runner/rear-dashcam-mount https://r2-upload.3dcarparts.workers.dev/file/parts/be3e4540-f628-4046-b124-1a408ae0e1f0/images/rear-dashcam-mount-1_1777887309046_854ynd.jpg in_stock 13.80 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/rear-dashcam-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ecfb736e-5f4d-4651-bb6d-ad9f4dcd737d 1984 Toyota Pickup / 4Runner Accessory Switch Panel "Applicable to 1984-1988 Toyota Pickups & 1984-1989 Toyota 4Runners:
This panel replaces an existing part that houses the rear defrost and/or power mirror switch panel below the driver's side HVAC vent within the dashboard. This new panel has 19mm (3/4"") of additional stick-out from the old panel to accommodate the ""wiring socket"" of a Carling Contura rocker switch assembly, should you choose to use the socket accessory for that switch. This panel accommodates (2) Carling Contura rocker switches and (1) OEM Toyota switch (in this case the rear defrost switch for a 1987 Toyota 4Runner). Accommodations have NOT been made for the power mirror button assembly." https://3dcarparts.org/library/1984/Toyota/Pickup%20%2F%204Runner/accessory-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/ecfb736e-5f4d-4651-bb6d-ad9f4dcd737d/images/accessory-switch-panel-1_1777887305306_zu8ggm.jpg in_stock 16.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Toyota/Pickup%20%2F%204Runner/accessory-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6169027c-f548-41e5-892c-21c017df3497 2015 Toyota 4Runner Trunk Hook "This is a replacement for the trunk hangers for my 2015 Toyota 4Runner Limited. It is the same design (symmetrical) for both sides.
I have a dog cover that has straps that always fell off when using the stock hangers, so I created this to address that. Seems to work good so far.
To remove the original, just squeeze the sides and a little flap opens downward. Inside is a single bolt. Remove the bolt and the whole thing comes right off. The new part is a little tight with a crescent wrench, but a socket and ratchet might work better.
I think it is the same design for all makes and for years 2015-2019 at least, but that has not been confirmed. Leave a comment if yours looks like the photo and/or if this part fits." https://3dcarparts.org/library/2015/Toyota/4Runner/trunk-hook https://r2-upload.3dcarparts.workers.dev/file/parts/6169027c-f548-41e5-892c-21c017df3497/images/trunk-hook-1_1777887300149_bhf13e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Toyota/4Runner/trunk-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-98055a12-7ae4-4d65-aa4c-dd9dc164e3af 2001 Toyota 4Runner Door Unlock Rod Clip This clip holds the rod that allows the key to unlock the passenger door on my 2001 4Runner. It probably works for many more vehicles. The bore diameter (clearance for the rod) is around 3.9mm. So take that into consideration if you decide to use this. I personally printed them with the C up. This is not ideal, but seems functional. Ideally the layer direction would be perpendicular to all the snaps. I recommend support for the gland end to prevent drooping or warping. Also clean it up with a razor after wards to allow the tight snap fit to work well. https://3dcarparts.org/library/2001/Toyota/4Runner/door-unlock-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/98055a12-7ae4-4d65-aa4c-dd9dc164e3af/images/door-unlock-rod-clip-1_1777887292869_wx94jw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Toyota/4Runner/door-unlock-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4a699273-1617-4a64-ba01-3e6bf280cbdc 2008 Toyota 4Runner Center Console Latch "The latch for the lid of the center console of a 2008 Toyota 4Runner.
Recommended to print on its side with supports for the tooth. Note: supports were somewhat difficult to remove from inner gap.
I received good results with Hatchbox PETG at 15% infill, but to optimize strength and pliability you may have to modify the infill to match your filament." https://3dcarparts.org/library/2008/Toyota/4Runner/center-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/4a699273-1617-4a64-ba01-3e6bf280cbdc/images/center-console-latch-1_1777887289743_q5kgcm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Toyota/4Runner/center-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b025362f-68dd-4138-8dd6-ab531ad3d9a5 1996 Toyota 4Runner Headlight Adjuster Nut 3rd gen Toyota 4runner headlight adjuster nut. Printed hex side down. https://3dcarparts.org/library/1996/Toyota/4Runner/headlight-adjuster-nut https://r2-upload.3dcarparts.workers.dev/file/parts/b025362f-68dd-4138-8dd6-ab531ad3d9a5/images/headlight-adjuster-nut-1_1777887284845_inutbe.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1996/Toyota/4Runner/headlight-adjuster-nut?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-449c3288-d905-4aaa-a1a5-b2a446075a8e 2010 Toyota 4Runner Cup Holder Adapter "Cup holder fits inside the rubber cup holder insert for the 4Runner. Best fit for the cup holder near the front. You must have the rubber OEM cup holder insert for this to fit properly.
Super Glue the base to the top, off set from the center, leaving about 1/2"" to one side. This makes it so you can turn and position the cup holder to clear the coin holder.
The Complete .STL file showing both files together is not recommended to print as one piece due to the complexity. Its easier to print both files separately then glue together." https://3dcarparts.org/library/2010/Toyota/4Runner/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/449c3288-d905-4aaa-a1a5-b2a446075a8e/images/cup-holder-adapter-1_1777887275664_v4rvjd.jpg in_stock 22.25 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7da47eb7-07ff-4153-9789-c99d065015a7 2003 Toyota 4Runner Front Door Tweeter Mount "This is a bracket to mount aftermarket 1 inch tweeters in the front doors of 4th Generation 4Runners.
I used these on my 2003 4runner and are working well, I assume the mount should work with all 4th gen 4Runners." https://3dcarparts.org/library/2003/Toyota/4Runner/front-door-tweeter-mount https://r2-upload.3dcarparts.workers.dev/file/parts/7da47eb7-07ff-4153-9789-c99d065015a7/images/front-door-tweeter-mount-1_1777887271086_7x4jr9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Toyota/4Runner/front-door-tweeter-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8b1d027-c0a2-49fa-887f-120b4c8f790b 2010 Toyota 4Runner Auxbeam RA60 6-Gang Switch Panel Mount "This is a solution for those who want to install an Auxbeam 6-gang auxiliary switch panel but do not want to drill holes into their dash for mounting brackets. This simply inserts into an already existing blank switch spot.
It was designed around the Auxbeam RA60 but might work with other models and could fairly easily be adapted to fit an 8-gang panel.
The self-tapping screws that were included with the switch panel were used to mount the two printed parts together as well as the included small screws to mount the bracket to the switch panel itself. After assembly, remove the blank switch and insert this one into the dash. The round cutout is used to run the wire behind the dash.
While originally designed for the blank switch location pictured in a 5th-generation 4Runner, this will likely work in other Toyota models and spots, provided the removed switch size is roughly 33mm x 22mm.
Thanks to user ""tiggerrr"" for designing the original blank switch part. I just modified it for my use and created the bracket to be used with it." https://3dcarparts.org/library/2010/Toyota/4Runner/auxbeam-ra60-6-gang-switch-panel-mount https://r2-upload.3dcarparts.workers.dev/file/parts/c8b1d027-c0a2-49fa-887f-120b4c8f790b/images/auxbeam-ra60-6-gang-switch-panel-mount-1_1777887265353_3n5nwb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/auxbeam-ra60-6-gang-switch-panel-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-18d58bc4-3ca0-41a9-a048-2325e2270e8d 2010 Toyota 4Runner Hitch Cover This fits my 2021 4Runner, so it should fit any 5th Gen or possibly any Toyota receiver. Printed in PETG so it would hold up to outside environment and heat. Snaps on and is easily remove yet it won’t fall off on the road. If you try higher layer height you may have issues with the two locking tabs printing good. Prints great at .2 layer height. Print with 3-4 walls and 4 top and bottom layers with concentric initial layer pattern to make it look nice. https://3dcarparts.org/library/2010/Toyota/4Runner/hitch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/18d58bc4-3ca0-41a9-a048-2325e2270e8d/images/hitch-cover-1_1777887262265_ibg1ig.jpg in_stock 17.88 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Toyota/4Runner/hitch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e9e79399-8950-4c71-8608-6ec4fa5991f6 1996 Toyota 4Runner Dash Vent Friction Shim "The dash vents in my 1998 Toyota 4runner started to wobble and wouldn't hold their positions, so this is the piece that broke and was printed.
I printed mine out of PLA and they have not had any troubles working with the heater or the AC on.
You might need to shave down the inside hole with a knife to make it fit snuggly, and I put the shim onto the car and then inserted the vents on top of it." https://3dcarparts.org/library/1996/Toyota/4Runner/dash-vent-friction-shim https://r2-upload.3dcarparts.workers.dev/file/parts/e9e79399-8950-4c71-8608-6ec4fa5991f6/images/dash-vent-friction-shim-1_1777887259182_qwqu19.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Toyota/4Runner/dash-vent-friction-shim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c785ee9d-f2ce-46a0-86ce-5e51f489483a 2010 Toyota 4Runner USB Holder This is to hold the USB cable end for the Cartrimhome T10 head unit for Toyota 4runner. It fits into any blank slot in a 5th generation 4runner. It is a friction fit only (both for the USB cable and the fit into the blank slot), so you may have some wiggle if your print shrinks more than mine. I printed with PETG. https://3dcarparts.org/library/2010/Toyota/4Runner/usb-holder https://r2-upload.3dcarparts.workers.dev/file/parts/c785ee9d-f2ce-46a0-86ce-5e51f489483a/images/usb-holder-1_1777887254731_1fw0aa.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/usb-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-addec9e7-edaf-4709-a32c-88b4c06dabbb 2018 Skoda Octavia Speaker Spacer "Had a few very good 6.5"" speakers lying around and looked at fitting them in the front doors of a 2018 Skoda Octavia station (model 5E) with a few printed spacers.
Printed in PLA" https://3dcarparts.org/library/2018/Skoda/Octavia/speaker-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/addec9e7-edaf-4709-a32c-88b4c06dabbb/images/speaker-spacer-1_1777885712951_xyt6d2.jpg in_stock 29.14 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Skoda/Octavia/speaker-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8124726-1090-4a35-851f-eb20a794d7ec 2005 Audi A4 Vent Pod Gauge Mount 52mm "This is a pod for the boost gauge in my 2005 Audi A4 B6. I couldn't find anything created for this car to mount a gauge and I didn't want to buy the replacement vent with the gauge in the centre. To install the vacuum line and power to the pod, I drilled a 1/4"" hole through the air duct to feed the lines up through.
I had to wrap my actual gauge with a couple layers of tape for it sit snug." https://3dcarparts.org/library/2005/Audi/A4/vent-pod-gauge-mount-52mm https://r2-upload.3dcarparts.workers.dev/file/parts/c8124726-1090-4a35-851f-eb20a794d7ec/images/vent-pod-gauge-mount-52mm-1_1777885248246_xuwy5h.jpg in_stock 15.46 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Audi/A4/vent-pod-gauge-mount-52mm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-64cf6810-3caf-4380-a2af-c91477fb3db7 2014 Skoda Fabia Fuel Cap Holder "If you getting mad seeing fuel cap bumping on your Fabia MK3 paint than this holder is designed for you.
It uses pocket designed for ice craper so you are unable to use both scraper and cap holder at once." https://3dcarparts.org/library/2014/Skoda/Fabia/fuel-cap-holder https://r2-upload.3dcarparts.workers.dev/file/parts/64cf6810-3caf-4380-a2af-c91477fb3db7/images/fuel-cap-holder-1_1777884938525_76az7y.jpg in_stock 12.47 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2014/Skoda/Fabia/fuel-cap-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-05c691d7-21be-420a-b38e-3b15ba8c56b1 2006 Skoda Roomster Trunk Floor Fastener Trunk floor fastener for Skoda Roomster. Probably fits other cars from VW Group as well. https://3dcarparts.org/library/2006/Skoda/Roomster/trunk-floor-fastener https://r2-upload.3dcarparts.workers.dev/file/parts/05c691d7-21be-420a-b38e-3b15ba8c56b1/images/trunk-floor-fastener-1_1777884933656_oytm7p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Skoda/Roomster/trunk-floor-fastener?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2ac2aa55-875e-4f5c-8d2a-b3240dd8b453 2009 Skoda Yeti Mirror Bush "3D printable replacement of broken mirror part
A bit larger than original (metal one is too tight to setup), but works good.
Printed with PETG - require high layer adhesion." https://3dcarparts.org/library/2009/Skoda/Yeti/mirror-bush https://r2-upload.3dcarparts.workers.dev/file/parts/2ac2aa55-875e-4f5c-8d2a-b3240dd8b453/images/mirror-bush-1_1777884929502_puumzi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Skoda/Yeti/mirror-bush?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-697fa911-6f5f-4cb9-a9d7-fbbdf08857e4 2013 Skoda Octavia Coin Tray Small coin tray for placement in the center console. https://3dcarparts.org/library/2013/Skoda/Octavia/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/697fa911-6f5f-4cb9-a9d7-fbbdf08857e4/images/coin-tray-1_1777884926286_l5e9nz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Skoda/Octavia/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cb1fdfef-3d92-4896-bb84-835cdb9983cc 2017 Skoda Superb Cup Holder Cup holder for a Skoda Superb. Construction year 2017 https://3dcarparts.org/library/2017/Skoda/Superb/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/cb1fdfef-3d92-4896-bb84-835cdb9983cc/images/cup-holder-1_1777884922849_ch7mdg.jpg in_stock 16.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Skoda/Superb/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54c56b4d-d0cb-40d0-b2fd-bcd2e3eba648 1997 VW Golf Parcel Shelf Pivot Clip VAG VW SKODA AUDI parcel shelf pivot plastic clip. For MK1 octavia or mk4/mk3 golf, left side. I print at very high density (70+). https://3dcarparts.org/library/1997/VW/Golf/parcel-shelf-pivot-clip https://r2-upload.3dcarparts.workers.dev/file/parts/54c56b4d-d0cb-40d0-b2fd-bcd2e3eba648/images/parcel-shelf-pivot-clip-1_1777884919644_i5kcwt.jpg in_stock 11.77 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/VW/Golf/parcel-shelf-pivot-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e7235e2f-c044-45fb-81f1-50f3f793b354 2021 Skoda Enyaq Frunk Box Holder "To fix two Euro-Boxes in a Skoda Enyaq.
The 3D-printed part is to fix the boxes in the front. To fix the boxes in the middle and the rear I used 20mm pipe clamps.
I used the Auer Packaging boxes ED-4312-HG:
https://www.auer-packaging.com/de/de/Eurobeh%C3%A4lter-mit-Scharnierdeckel/ED-4312-HG.html" https://3dcarparts.org/library/2021/Skoda/Enyaq/frunk-box-holder https://r2-upload.3dcarparts.workers.dev/file/parts/e7235e2f-c044-45fb-81f1-50f3f793b354/images/frunk-box-holder-1_1777884916815_fha99s.jpg in_stock 17.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2021/Skoda/Enyaq/frunk-box-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f61cfe23-0ce9-4a1d-9fe1-e801aba62fe1 2003 Audi A8 Door Striker Silencer / Rubber Stop "Rubber stops on the car-door hinges were developed by Audi on model A8 (generation unknown). In essence, they were designed to damm the noise when closing the doors. Although originally made from rubber, these work well when printed from PLA as well.
The original number of rubber bands from the A8 is VAG 4E4 837 763." https://3dcarparts.org/library/2003/Audi/A8/door-striker-silencer-rubber-stop https://r2-upload.3dcarparts.workers.dev/file/parts/f61cfe23-0ce9-4a1d-9fe1-e801aba62fe1/images/door-striker-silencer-rubber-stop-1_1777884913626_0usu00.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Audi/A8/door-striker-silencer-rubber-stop?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ba5ffd59-dd24-4ef2-8dfa-1d6a1f37295d 2007 Skoda Fabia Rear Parcel Shelf Support "The support for my back hat shelf broke and gave me a small hole which I filled in with this part.
The glue is not really necessary... but I put it and I fix my car until the end of time!
I have printed mine horizontally to have a maximum resistance." https://3dcarparts.org/library/2007/Skoda/Fabia/rear-parcel-shelf-support https://r2-upload.3dcarparts.workers.dev/file/parts/ba5ffd59-dd24-4ef2-8dfa-1d6a1f37295d/images/rear-parcel-shelf-support-1_1777884909832_e3b8wa.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Skoda/Fabia/rear-parcel-shelf-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7fdb28be-f5a4-4e87-8d75-bad228682c78 2006 Skoda Octavia Headlight Mounting Nut Skoda Octavia (2006) headlight mounting nut https://3dcarparts.org/library/2006/Skoda/Octavia/headlight-mounting-nut https://r2-upload.3dcarparts.workers.dev/file/parts/7fdb28be-f5a4-4e87-8d75-bad228682c78/images/headlight-mounting-nut-1_1777884904121_d3jilo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2006/Skoda/Octavia/headlight-mounting-nut?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb3cb06f-bf42-4bf9-94d5-37b1055a7834 2001 Skoda Octavia Armrest Lock "The lock for the armest on my 2001 Skoda Octavia broke :(... So I made a new one.
Just glue the ""TOP"" part in the little hole in the armrest cover, and stick the ""Bottom"" part in the lower slot." https://3dcarparts.org/library/2001/Skoda/Octavia/armrest-lock https://r2-upload.3dcarparts.workers.dev/file/parts/bb3cb06f-bf42-4bf9-94d5-37b1055a7834/images/armrest-lock-1_1777884898966_mm1s4u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Skoda/Octavia/armrest-lock?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e77ccf72-6a91-48ef-9ae5-f82583b8f013 1964 Skoda 1000 MB Ventilating Wing Window Rod Stop "Skoda 1000 MB and the first model of Skoda 100.
Rod stop of ventilating wing window." https://3dcarparts.org/library/1964/Skoda/1000%20MB/ventilating-wing-window-rod-stop https://r2-upload.3dcarparts.workers.dev/file/parts/e77ccf72-6a91-48ef-9ae5-f82583b8f013/images/ventilating-wing-window-rod-stop-1_1777884895163_yu9imr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1964/Skoda/1000%20MB/ventilating-wing-window-rod-stop?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5b80a24a-e1c6-4ef4-a760-970c58a8c336 2013 Skoda Octavia Phone Slot Cup Holder Insert "A phone holder to be placed into the cup holder of a MK3 Skoda Octavia.
Please find also CAD models for easier remixing if you want.
I have printed the short version for myself (see photos), but there is also a full version available." https://3dcarparts.org/library/2013/Skoda/Octavia/phone-slot-cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/5b80a24a-e1c6-4ef4-a760-970c58a8c336/images/phone-slot-cup-holder-insert-1_1777884885697_k6jlft.jpg in_stock 27.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Skoda/Octavia/phone-slot-cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-311cc40f-0f7d-4425-997e-c0b61b843843 2012 Skoda Rapid Cup Holder Inlay I designed and printed an insert for the cup holder in the center console of my Skoda Rapid. I personally find two compartments and a holder for a shopping cart token to be better than what Skoda considers practical in the center console. https://3dcarparts.org/library/2012/Skoda/Rapid/cup-holder-inlay https://r2-upload.3dcarparts.workers.dev/file/parts/311cc40f-0f7d-4425-997e-c0b61b843843/images/cup-holder-inlay-1_1777884882327_18bg6i.jpg in_stock 18.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Skoda/Rapid/cup-holder-inlay?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7d4f3eb2-ca5f-45e8-810b-df82c48eaaaa 2007 Skoda Fabia Parcel Shelf Clip "Genuine parts are expensive and don't last very long.
The part created by *effort* is a great re-production but i still found the end of the 'hook' broke very quickly.
I have simply added more material to the front and behind the hook. I've also relocated the top right hand stud to avoid breakage, this seems to line up better with the factory backing plate better for me.
For printing, pop this in your slicer and mirror for the other side of the shelf." https://3dcarparts.org/library/2007/Skoda/Fabia/parcel-shelf-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7d4f3eb2-ca5f-45e8-810b-df82c48eaaaa/images/parcel-shelf-clip-1_1777884878239_n1tfw0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Skoda/Fabia/parcel-shelf-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-97f4c67b-80e5-4a7d-a0c0-80d2a1faa0a7 2004 Skoda Octavia Headlight Cleaning Nozzle "This is a Headlight cleaning nozzle for a Skoda Octavia 1Z (Mk2). It will probably fit most Volkswagen which use the same technique.
I designed it because my Octavia RS has lost 2 cleaning nozzles by now, and it is not possible to buy them seperatly by Skoda/Volkswagen. You have to buy the complete Headlight cleaning pump.
It has a nice firm fit, I also used some glue to hold them in place - they will never get lost again ;)" https://3dcarparts.org/library/2004/Skoda/Octavia/headlight-cleaning-nozzle https://r2-upload.3dcarparts.workers.dev/file/parts/97f4c67b-80e5-4a7d-a0c0-80d2a1faa0a7/images/headlight-cleaning-nozzle-1_1777884874915_0hjylt.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Skoda/Octavia/headlight-cleaning-nozzle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8a9ff136-230c-4f16-9a7f-864400fdc707 2013 Nissan NV200 Door Speaker Adapter Adaptor for Nissan NV200 U.S.A. version, fitting speaker JBL GTO638 https://3dcarparts.org/library/2013/Nissan/NV200/door-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/8a9ff136-230c-4f16-9a7f-864400fdc707/images/door-speaker-adapter-1_1777884871509_vqkuze.jpg in_stock 14.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Nissan/NV200/door-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dbdd3da0-bd51-4f9f-a1c6-8a1fc49e7455 2007 Nissan Qashqai Headlight Cover Nissan qashqai j10 headlight cover model for 3D printing https://3dcarparts.org/library/2007/Nissan/Qashqai/headlight-cover https://r2-upload.3dcarparts.workers.dev/file/parts/dbdd3da0-bd51-4f9f-a1c6-8a1fc49e7455/images/headlight-cover-1_1777884217253_4jyw08.jpg in_stock 20.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2007/Nissan/Qashqai/headlight-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4fd16c5e-775a-4d9f-8f43-8b263f4cbeee 1982 Subaru Brat 12V Outlet Ashtray Adapter "Attention.
12VuttagSubaru2 is the latest model.
It has a hole for the clamp and longer hooks to grab better and is minimized to save plastic.
This adapter replace the ashtray on Subaru Brat gen 2 models.
It's a direct fit and it is designed to use the original bend clamp if wanted.
The outlets are from AliExpress/Universal.
You will need to file the hooks to get a perfect fit.
All panels aren't the same so I made them large in the last model" https://3dcarparts.org/library/1982/Subaru/Brat/12v-outlet-ashtray-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/4fd16c5e-775a-4d9f-8f43-8b263f4cbeee/images/12v-outlet-ashtray-adapter-1_1777884211317_gqf94h.jpg in_stock 12.78 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/Subaru/Brat/12v-outlet-ashtray-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a66e6f5c-606b-4c0a-a22c-6c7c0e23c1a7 2005 Subaru Legacy Tablet Bezel This is a bezel I designed to fit into the center of the dash between the two vents. More info here http://csmatt.com/notes/?p=5. The original was fiberglass, but I wanted a model I could easily tweak in order to allow for a different tablet to be used. I'll try to update this with pics of how everything fits together with the printed plastic version. https://3dcarparts.org/library/2005/Subaru/Legacy/tablet-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/a66e6f5c-606b-4c0a-a22c-6c7c0e23c1a7/images/tablet-bezel-1_1777884204793_26vnjd.jpg in_stock 21.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Subaru/Legacy/tablet-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ebe4aad0-4b80-4540-aa72-3a1dee91efe9 1980 Subaru DL Speedometer Needle This is a replacement speedometer needle for my 1982 Subaru Brat DL. It should fit any EA81 Subaru DL (1980-84 for cars, 1982-84 for Brats). The low-end DL trim level cars and Brats had a different instrument layout than the higher-end GL models. The speedometer needle for the DL models is very thin, and after a few decades in the harsh sun of Southern Utah the needle in my Brat DL was very faded and warped. Perfect candidate for a 3D printed replica! https://3dcarparts.org/library/1980/Subaru/DL/speedometer-needle https://r2-upload.3dcarparts.workers.dev/file/parts/ebe4aad0-4b80-4540-aa72-3a1dee91efe9/images/speedometer-needle-1_1777884200037_c3qzhn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1980/Subaru/DL/speedometer-needle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-75b0f00c-8406-493b-96fb-5efe712f5e79 1999 Subaru Outback Door Speaker Mount "I recently blew the door speakers in my Australian 2003 Subaru Outback wagon only to find i needed to make a mount to allow the fitment of new aftermarket speakers.
The following STLs will fit the three-point fitment holes in BH Outbacks 1999-2003. You'll need to print two rear and one of each front as they are angled. The door skins will fit perfectly over the mounts no problem.
I printed mine in PolyMaxx at 75% infill as I wanted something solid to screw the speakers to, but that may have been overkill. No supports required.
I also suggest some sort of stick on foam strip like door sealer on the face that touches the door to prevent rattles and make a better seal for bass." https://3dcarparts.org/library/1999/Subaru/Outback/door-speaker-mount https://r2-upload.3dcarparts.workers.dev/file/parts/75b0f00c-8406-493b-96fb-5efe712f5e79/images/door-speaker-mount-1_1777884193896_sh48lo.jpg in_stock 19.20 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Subaru/Outback/door-speaker-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f90ea884-6985-4cd6-b18b-cbc15cb49484 2000 Subaru Impreza Radiator Grille Clip Holder Clip holder for Car radiator grill. Subaru WRX / STI 2000-2002. Replacement part: 909130030. The original part demarged easy if you remove the radiator grill. https://3dcarparts.org/library/2000/Subaru/Impreza/radiator-grille-clip-holder https://r2-upload.3dcarparts.workers.dev/file/parts/f90ea884-6985-4cd6-b18b-cbc15cb49484/images/radiator-grille-clip-holder-1_1777884188010_63ps1f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Subaru/Impreza/radiator-grille-clip-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-42b6c899-aaa1-43bd-bf24-905c63aab5a4 1997 Subaru Legacy Cargo Cover Catch "Update: My first print of this did not fit after trimming away support material. The square peg is too big. In fact, I think all the proportions need to come down a little, and it could use some quarter rounding on the edges....
---
This is a replacement cargo cover catch nugget for 1997 (1st gen) Subaru Legacy Outback." https://3dcarparts.org/library/1997/Subaru/Legacy/cargo-cover-catch https://r2-upload.3dcarparts.workers.dev/file/parts/42b6c899-aaa1-43bd-bf24-905c63aab5a4/images/cargo-cover-catch-1_1777884184691_ycue97.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Subaru/Legacy/cargo-cover-catch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6a58c26f-b457-45a2-a909-336b22e297d3 2007 Subaru Impreza / WRX A-Pillar 52mm Gauge Pod Design/Printed for a 2010 Subaru Wrx. Should fit all/most 3gen Gen Impreza/Wrx 2007-2011 https://3dcarparts.org/library/2007/Subaru/Impreza%20%2F%20WRX/a-pillar-52mm-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/6a58c26f-b457-45a2-a909-336b22e297d3/images/a-pillar-52mm-gauge-pod-1_1777884181253_fnqxxf.jpg in_stock 25.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Subaru/Impreza%20%2F%20WRX/a-pillar-52mm-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6cd0f2a0-78b4-4525-906a-b538156067b2 2007 Skoda Fabia Parcel Shelf Bracket For anyone whose stupid nipple on the parcel shelf has also broken off, feel free to reprint a new one. If you need it for the other side, simply mirror it. Just snap out the old one, and carefully insert the new one and clip it together from the back. https://3dcarparts.org/library/2007/Skoda/Fabia/parcel-shelf-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/6cd0f2a0-78b4-4525-906a-b538156067b2/images/parcel-shelf-bracket-1_1777884178043_j5l09y.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Skoda/Fabia/parcel-shelf-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-da03ace1-e7d8-4001-a4fc-d3e7fc1ebdc2 1997 Volkswagen Golf Speaker Adapter Ring "This is a quick and dirty print plz. no comments about the print quality.
---------------------------------------------------
Adapter for mounting Speakers to the Golf 4 or Golf mk4 or Golf IV however you wanna call it :)
Should fit any 165mm speakers. Used it to adapt my JBL Stage 600.
This design allows to maintain the original connection rubber between the speakers and the door cover.
Note: The holes in the top part are just for orientation. They need to be drilled out after. I did this because I decided to print with a .4 and not a .2 nozzle.
---------------------------------------------------
Adapter ring for the Golf 4. Should fit all speakers with 165mm diameter.
The original rubber ring between speaker and trim panel can continue to be used.
Note: The holes on the top plate need to be enlarged with a drill afterwards. I only included them in the design for orientation." https://3dcarparts.org/library/1997/Volkswagen/Golf/speaker-adapter-ring https://r2-upload.3dcarparts.workers.dev/file/parts/da03ace1-e7d8-4001-a4fc-d3e7fc1ebdc2/images/speaker-adapter-ring-1_1777883769938_okltq7.jpg in_stock 26.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf/speaker-adapter-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8973cf1c-46bb-46ea-b4ce-e88c83694e53 2011 Nissan Sentra Gas Cap Tether "for my 2011 Sentra
fits on a 140x140 build plate
PRINT WITH TPU
-
.2mm layers
100% infill
Ninjatek Cheetah TPU
_____________________
12-17-21 - 14 months later it's kinda dirty but otherwise it is still great." https://3dcarparts.org/library/2011/Nissan/Sentra/gas-cap-tether https://r2-upload.3dcarparts.workers.dev/file/parts/8973cf1c-46bb-46ea-b4ce-e88c83694e53/images/gas-cap-tether-1_1777883722565_71uaii.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2011/Nissan/Sentra/gas-cap-tether?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ac49e0f2-7125-4791-a893-de0cd7b850f9 1989 Nissan 240SX Vent Pod (52mm Gauge) "I whipped these up for a friend a while back. I don't have any ""good"" pics of them currently, but it is one of my better designs. They function and appear much like OEM. Enjoy!" https://3dcarparts.org/library/1989/Nissan/240SX/vent-pod-52mm-gauge https://r2-upload.3dcarparts.workers.dev/file/parts/ac49e0f2-7125-4791-a893-de0cd7b850f9/images/vent-pod-52mm-gauge-1_1777883719280_fl56oi.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Nissan/240SX/vent-pod-52mm-gauge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b667c28b-fe8c-4a5a-be38-062eb2678c5d 1989 Nissan 200SX Washer Fluid Cap "I am designed another S13 washer fluid cap because what I found there on Thingiverse, isn't fit. So if you have S13 and the measured diameter what is shown on the picture is 57-57,4mm, this cap fits for you. I am printed it with ABS and heated the link between the cap and holder ring, to fold it together, but PETG works better I think. There is two versions, one with logo on the top, and one without.
Dual USB Port Panel for Hondas
I modified this switch plate so that you can have 2 USB's looking factory fresh in your 20 year old Honda. I wrapped the USB plugs in electrical tape to hold it into place, which also helps give extra strength to the clips so they don't snap as easily. Afterwards I used hot glue to really anchor the USBs down to the middle section. I'm putting this into an 03 Honda Civic but I'm sure it will work for a lot of different Hondas. The power converter linked is strong enough to power a raspberry pi in case you were thinking of using OpenAuto Pro.
I also made a version where the USB's are turned 90 degrees in case your plates are orientated differently. The most important part is gluing the USB's into it so you cant push them into your car. I used hot glue from the back, that way it can be removed if necessary.
The latest version of the ""long ways"" file is fully solid, because the clips broke the first time I tried to install it. Now it sits nice and snug ;)
2 USB DC-DC Converter:
https://www.amazon.com/gp/product/B07T2YFG9M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
T- tap wire connectors:
https://www.amazon.com/gp/product/B07114RK67/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" https://3dcarparts.org/library/2003/Honda/Civic/dual-usb-port-plate https://r2-upload.3dcarparts.workers.dev/file/parts/34ae0b96-1dbc-4720-bba2-abbd5fbbf437/images/dual-usb-port-plate-1_1777882139884_ey2ei0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Honda/Civic/dual-usb-port-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ad44a3b7-e906-45cc-92a3-7892fc8d03a1 1996 Audi A3 Radio Surround Frame Frame for autoradio Audi A3 8L with radio 188mm x 60mm https://3dcarparts.org/library/1996/Audi/A3/radio-surround-frame https://r2-upload.3dcarparts.workers.dev/file/parts/ad44a3b7-e906-45cc-92a3-7892fc8d03a1/images/radio-surround-frame-1_1777882136768_9kv3a1.jpg in_stock 10.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Audi/A3/radio-surround-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6cf6c17b-9c42-451d-b8d0-8a5a07d62db2 1997 Audi S4 Front Speaker Bracket Adapter "This bracket was designed for a friends Audi B5 S4 Bose door speakers, this is for the front left door mounted speaker (mirror the model for the right side). The adapter allows a replacement speaker with a standard mounting method to be fitted.
I do not know if this would fit a normal A4 or one without the Bose Speakers. I also do not know if there were any regional differences.
The stock speakers use a propriety mounting system which wont take any standard size speakers. The speakers this was designed for can be seen here:
https://www.blam-audio.com/en/100-rs/
The dimensions of the speaker fitment can be seen in the images.
The groove in the face which touches the door card is designed for the TPU insert to prevent rattles, this could probably also just be filled with silicone or resin.
I will probably be creating the much simpler rear door speaker brackets soon." https://3dcarparts.org/library/1997/Audi/S4/front-speaker-bracket-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/6cf6c17b-9c42-451d-b8d0-8a5a07d62db2/images/front-speaker-bracket-adapter-1_1777882129516_31cgil.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/Audi/S4/front-speaker-bracket-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6c42cbb7-2fbe-4930-ab42-2ea4cdbafa14 1994 Audi A4 Cup Holder Adapter A simple Adapter for the Audi A4 B5 Cupholder to fit those small chewing gum containers https://3dcarparts.org/library/1994/Audi/A4/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/6c42cbb7-2fbe-4930-ab42-2ea4cdbafa14/images/cup-holder-adapter-1_1777882126462_pdbbg9.jpg in_stock 11.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Audi/A4/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8d812003-8f07-4a8d-9e66-284ab112e79c 2001 Audi A4 Avant Hazard Triangle Compartment Latch "Update (2/26/21): I've uploaded V3 files. These are similar to the previous version, but the main shaft is hex shaped versus the older ""D"" style shaft. I noticed that the D style would develop slop in the pawl, so turning the knob to close the door would need more than the 90 degree angle. The shaft is still press fit into the knob and glued into place, but it is meant to be printed on it's side for better strength.
The latch that closes the hazard triangle compartment on my B6 A4 Avant had broken. But unlike others where the catch breaks, the knob on mine broke. It had been previously repaired with glue, so instead of gluing it again only for it fail shortly I decided to use my 3D printer. So I used GrMechEng's assembly which is comprised of three parts, the catch, shaft, and knob. The catch doesn't have a tab like the original Audi part that only allows 90 degree of rotation. However, matthewlaberge's design of the catch does retain this feature. Thankfully, he uploaded the STEP file, so I was able to modify it to accept the shaft from the other design.
Assembly:
1. Apply glue to hole in knob and insert shaft.
2. Slip knob and shaft through hole in Audi cover.
3. Connect catch using a M3 flathead screw, the hole in the shaft is sized appropriately. But if necessary can be drilled out slightly. Done!
Note: Shaft may need to be scaled down slightly to ensure a snug fit." https://3dcarparts.org/library/2001/Audi/A4%20Avant/hazard-triangle-compartment-latch https://r2-upload.3dcarparts.workers.dev/file/parts/8d812003-8f07-4a8d-9e66-284ab112e79c/images/hazard-triangle-compartment-latch-1_1777882116782_klj5pe.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/A4%20Avant/hazard-triangle-compartment-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9bc50bf6-e5b0-46b8-95b0-a54412d7cb59 2001 Audi A4 Air Vent Repair Clip "Repair piece for Audi A4 S4 RS4 B6/B7 front horizontal air vents:
Mfg Part #8E0820951H6PS
ECS Part #ES#6504
Usually broken by clip on air fresheners." https://3dcarparts.org/library/2001/Audi/A4/air-vent-repair-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9bc50bf6-e5b0-46b8-95b0-a54412d7cb59/images/air-vent-repair-clip-1_1777882113069_4epq0r.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/A4/air-vent-repair-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5fbaed3c-173b-461d-b7a3-65e8fb4dd97f 1990 Toyota Pickup Wiper Arm Cover "Remix of Toyota Versa wiper arm cover to fit 90's Toyota Pickup, 4Runner and Tacoma Wiper arms. May fit others too.
Printed from PETG" https://3dcarparts.org/library/1990/Toyota/Pickup/wiper-arm-cover https://r2-upload.3dcarparts.workers.dev/file/parts/5fbaed3c-173b-461d-b7a3-65e8fb4dd97f/images/wiper-arm-cover-1_1777882108875_drdv9x.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Toyota/Pickup/wiper-arm-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2de1c7cf-9528-4c70-8d2e-305a43f9e334 2015 Toyota Auris Armrest Tray Inlay "This is an inlay for the upper tray of the Toyota Auris armrest.
(esp. Toyota Auris 1.2 Turbo produced since 06/2015)
I was unhappy with the hard inlay of the tray because small parts, i.e. coins, used to slide around with a scratchy sound while driving the car.
So I designed an inlay that should be printed with TPU to suppress that scratchy sound. Additionally I added a separator to keep pieces in front or back.
2019.03.13:
Added 3 models with more/different slots." https://3dcarparts.org/library/2015/Toyota/Auris/armrest-tray-inlay https://r2-upload.3dcarparts.workers.dev/file/parts/2de1c7cf-9528-4c70-8d2e-305a43f9e334/images/armrest-tray-inlay-1_1777882091003_dktlej.jpg in_stock 8.46 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Toyota/Auris/armrest-tray-inlay?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7f42b1d-82f2-490d-9f99-c4d348dd6731 2008 Ford Fiesta Cup Holder 08 Ford Fiesta cup holder, fits where the coin holder is, printed and tested. https://3dcarparts.org/library/2008/Ford/Fiesta/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/f7f42b1d-82f2-490d-9f99-c4d348dd6731/images/cup-holder-1_1777881633594_azq6pd.jpg in_stock 17.84 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Ford/Fiesta/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e36d9a38-fae3-4bc2-b9ab-b4f76a154ca3 1999 Ford Mondeo Power Window Switch "This is a replacement part for a broken Ford Mondeo ""99 power window switch. (Left side, European)" https://3dcarparts.org/library/1999/Ford/Mondeo/power-window-switch https://r2-upload.3dcarparts.workers.dev/file/parts/e36d9a38-fae3-4bc2-b9ab-b4f76a154ca3/images/power-window-switch-1_1777881628035_275rgh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Ford/Mondeo/power-window-switch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-024fc2ba-c0cb-4f7d-85c1-a4588de35a08 2013 Ford Fiesta ST Rocker Molding Retainer Clip "This is the retainer clip that keeps the rocker molding (aka ground effect) attached to the rocker panel on a 2013 - 2017 (I have a 2014) Ford Fiesta ST (aka MK7 Fiesta ST, FiST). May work with other Ford models. I also tagged GM because I found the same clip at a nearby O'Reilly's auto parts store in the GM bin.
Your mileage may vary. For off-road use only. No warranty implied or expressed. Prints best on the short side with supports." https://3dcarparts.org/library/2013/Ford/Fiesta%20ST/rocker-molding-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/024fc2ba-c0cb-4f7d-85c1-a4588de35a08/images/rocker-molding-retainer-clip-1_1777881624523_rvvofs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Ford/Fiesta%20ST/rocker-molding-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4166a5a5-0d42-45ef-9d8e-732b85cf4125 2022 Ford Maverick Under Seat Storage Divider "Divider for the under rear seat storage of a 2022 Ford Maverick.
3D print the Slot Tee and add whatever divider material you have handy, I used a scrap of 1/8"" MDF.
My FITS Tee is sized for an 8-32 screw and hex nut." https://3dcarparts.org/library/2022/Ford/Maverick/under-seat-storage-divider https://r2-upload.3dcarparts.workers.dev/file/parts/4166a5a5-0d42-45ef-9d8e-732b85cf4125/images/under-seat-storage-divider-1_1777881621088_xfy9cc.jpg in_stock 8.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Ford/Maverick/under-seat-storage-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-056ef5fe-4bc2-48d0-941d-3aa9a442dc64 2003 Honda Element Cup Holder "A friend of mine and co-worker asked me to design and print a better cup holder for the Honda Element to replaces the stock one. The main complaint with the stock cup holder is that the cups it is designed to hold is too small. These 3d-designed cup holders allow for larger containers (cups and bottles) to be held in them.
There are three versions that have the cup holders and three that are open holes allowing for even taller containers to be used.
The recommend plastics for printing with are PETG, ABS, Nylon and Polycarbonate since the interior of cars can easily reach the glass transition temperature of PLA." https://3dcarparts.org/library/2003/Honda/Element/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/056ef5fe-4bc2-48d0-941d-3aa9a442dc64/images/cup-holder-1_1777881600878_5cn9yy.jpg in_stock 27.44 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Honda/Element/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2d5a4d1a-6737-4970-a317-60de07347c3c 1998 Honda Accord Climate and Temperature Control Knob This is a climate control knob for a 1998-2002 Honda Accord. Also doubles as the temperature control knob. Will fit other Honda vehicles. https://3dcarparts.org/library/1998/Honda/Accord/climate-and-temperature-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/2d5a4d1a-6737-4970-a317-60de07347c3c/images/climate-and-temperature-control-knob-1_1777881596908_plplev.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Honda/Accord/climate-and-temperature-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21de158f-ebb2-4288-91ec-ab2710777353 1993 Honda Del Sol Convertible Roof Lever Made a lever for the 93 Honda Delsol's convertible roof. I am sure they will fit most if not all delsols. This model is for the driver side (US). if you need the other side, just flip the model. works fine. https://3dcarparts.org/library/1993/Honda/Del%20Sol/convertible-roof-lever https://r2-upload.3dcarparts.workers.dev/file/parts/21de158f-ebb2-4288-91ec-ab2710777353/images/convertible-roof-lever-1_1777881593741_6kbqrc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Honda/Del%20Sol/convertible-roof-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-73610e7e-5983-429c-9b0c-98960d7635a7 2016 Honda Fit Center Console Latch Replacement part for the center console latch on my 2016 Honda Fit. https://3dcarparts.org/library/2016/Honda/Fit/center-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/73610e7e-5983-429c-9b0c-98960d7635a7/images/center-console-latch-1_1777881590214_onibef.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Honda/Fit/center-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b3c1462c-9407-4d4b-9c12-c045deae0bfd 2012 Honda Accord Switch Panel I created this switch panel for a 2012 Honda Accord to mount a switch for the LED light bar. There are two versions - one is a blank panel and the other has an indent to take the oval shaped switch I used. https://3dcarparts.org/library/2012/Honda/Accord/switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/b3c1462c-9407-4d4b-9c12-c045deae0bfd/images/switch-panel-1_1777881581273_c870r9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Honda/Accord/switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e99886e8-44bb-4372-8a20-74b04199b62c 1995 Honda CR-V Fender Flare Clip Honda CRV RD1 Fender Flare Clip https://3dcarparts.org/library/1995/Honda/CR-V/fender-flare-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e99886e8-44bb-4372-8a20-74b04199b62c/images/fender-flare-clip-1_1777881576901_xyv499.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1995/Honda/CR-V/fender-flare-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-562af492-e57a-491a-87b0-c80759670d23 2010 Toyota Prius ECU Connector Cover "This is a cover for the connector near the engine compartment fuse box.
A part designed based on Lexus Part number: 82821-76010
**Update**: a new version is provided with better locking pins and 1mm increased height. (*prius_82821-76010_v0.96.stl*) Also added some chamfers to reduce overhangs.
Toyota Prius models did not get this cover, probably due to cost reduction.
Compatible vehicles (which did *not* have the cover at the factory):
- Toyota Prius GEN 3 (hybrid & plug-in hybrid)
- Toyota Prius Plus / V
Compatible vehicles (which had the cover at the factory)
- Lexus CT200h (ZWA10) 12/2010-
- Toyota Mirai (JPD10) 06/2015-04/2020
The PCH abbreviation stands for [Prius Club Hungary](https://priusclub.hu/)" https://3dcarparts.org/library/2010/Toyota/Prius/ecu-connector-cover https://r2-upload.3dcarparts.workers.dev/file/parts/562af492-e57a-491a-87b0-c80759670d23/images/ecu-connector-cover-1_1777881155168_v1lwsm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2010/Toyota/Prius/ecu-connector-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0f81b770-0e08-40d1-bb82-e67fcf756353 2001 Toyota Prius Air Vent Blade Air vent blade for Toyota Prius Gen 1 (2001). https://3dcarparts.org/library/2001/Toyota/Prius/air-vent-blade https://r2-upload.3dcarparts.workers.dev/file/parts/0f81b770-0e08-40d1-bb82-e67fcf756353/images/air-vent-blade-1_1777881151478_pv7h3p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Toyota/Prius/air-vent-blade?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-254d4daf-7d11-438e-9977-3ea0442de81a 1998 Toyota Camry Sun Visor Clip "A replacement sun visor bracket for a 1998 Toyota Camry. Should fit both sides - only tested on driver's side. Use factory screw to reattach.
It is unlikely that the part which expands around the screw will print entirely properly, but it should print well enough to work.
Use supports." https://3dcarparts.org/library/1998/Toyota/Camry/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/254d4daf-7d11-438e-9977-3ea0442de81a/images/sun-visor-clip-1_1777881147972_ll4wja.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Toyota/Camry/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb5e1d59-f9d0-4af1-b697-b95d23394e51 1983 Toyota Pickup Visor Clip This visor clip has been working in my truck for well over two years now. https://3dcarparts.org/library/1983/Toyota/Pickup/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bb5e1d59-f9d0-4af1-b697-b95d23394e51/images/visor-clip-1_1777881138880_nc2u0j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Toyota/Pickup/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-30b92214-194b-48de-9ac1-ce1b4ecdd795 2007 Toyota Camry Cup Holder "I designed a Toyota Camry (2007-10) cup holder to replace a missing middle part. The compartment for the cup holder is very shallow and asymmetric in design. My goal was to replace the missing (but spring loaded) OEM part with a device that could accommodate a large big-gulp cup.
The cup holder I designed is in two parts; 1) A stand alone cup holder 2) A frame which fits into the cup holder to hold large cups firmly in place.
The shallow cup holder was never designed to accommodate a large sized cup. The hinged cup holder box on the car made this design very difficult; the box is not square in any direction, and it has a hinge.
http://www.ebay.com/itm/CENTER-CONSOLE-CUP-HOLDER-INSERT-DIVIDER-FOR-TOYOTA-CAMRY-2007-2011-BRAND-NEW-/272243556464?fits=Year%3A2010%7CMake%3AToyota%7CModel%3ACamry&hash=item3f62fb0070:g:NL0AAOSwve5XOAov&vxp=mtr
http://www.ebay.com/itm/CUP-HOLDER-INSERT-DIVIDER-FOR-2007-2011-TOYOTA-CAMRY-CE-SE-XLE-LE-HYBRID-/201509450112?fits=Year%3A2010%7CMake%3AToyota%7CModel%3ACamry&hash=item2eeae63180:g:pFwAAOSwqrtWouBe&vxp=mtr" https://3dcarparts.org/library/2007/Toyota/Camry/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/30b92214-194b-48de-9ac1-ce1b4ecdd795/images/cup-holder-1_1777881134502_sc7qeo.jpg in_stock 30.37 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Toyota/Camry/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1ccde69e-2b28-4d88-a940-262a6faa4067 1991 Ford F-150 Door Armrest Handle Its an armrest. It fits 1991 Ford F150 well. https://3dcarparts.org/library/1991/Ford/F-150/door-armrest-handle https://r2-upload.3dcarparts.workers.dev/file/parts/1ccde69e-2b28-4d88-a940-262a6faa4067/images/door-armrest-handle-1_1777881105351_oqliyl.jpg in_stock 28.40 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Ford/F-150/door-armrest-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4b59f647-8da0-41a2-bd30-40e435561d98 2006 Ford Ranger HVAC control knob "A friend was missing a knob for his 2006 ford Ranger. Definitely not an exact match but passable. I cut and filed a small bit from a sheet of 2mm plexiglass for a lens.
NOTE: MY NEWEST SHARED DESIGNS ARE ON PRINTABLES
https://www.printables.com/social/253361-manimal/models" https://3dcarparts.org/library/2006/Ford/Ranger/hvac-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/4b59f647-8da0-41a2-bd30-40e435561d98/images/hvac-control-knob-1_1777881101169_q91kkd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Ford/Ranger/hvac-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-140eb8b7-4e40-4f7f-a12c-430ed42b867c 2020 Ford Escape Change Cup This is a change cup for the 2020 Ford Escape. It may fit other, newer Fords, but I don't know. If you have this car, then you know there is a center section of the front cup holders that is completely useless. This, at least gives you a place for loose change. https://3dcarparts.org/library/2020/Ford/Escape/change-cup https://r2-upload.3dcarparts.workers.dev/file/parts/140eb8b7-4e40-4f7f-a12c-430ed42b867c/images/change-cup-1_1777881097319_2lwdzt.jpg in_stock 7.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Ford/Escape/change-cup?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3b931a7f-c776-4939-9a47-635888f673f1 2013 Ford Fusion Cup Holder Insert "I needed a custom cup holder insert for the necessities, so I made one. Designed for a 2013 Ford Fusion cup holder but will likely fit most cup holders adequately.
Holds: 2013 Ford key fob, nail clippers, breath strips, chapstick, and has a large pocket for other miscellaneous items.
Be sure to print in a material able to withstand the heat of a car interior in the summer.
I designed it in Mastercam, which I don't have access to anymore so I can't make any changes to the STL." https://3dcarparts.org/library/2013/Ford/Fusion/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/3b931a7f-c776-4939-9a47-635888f673f1/images/cup-holder-insert-1_1777881093553_54i6e7.jpg in_stock 25.15 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Ford/Fusion/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0e5bab00-6628-48b3-8487-0cdb177ec97b 2005 BMW 3 Series 10cm Speaker Adapter Mount My upgrade for BMW e90 speakers to 10cm speaker and 4 holes. https://3dcarparts.org/library/2005/BMW/3%20Series/10cm-speaker-adapter-mount https://r2-upload.3dcarparts.workers.dev/file/parts/0e5bab00-6628-48b3-8487-0cdb177ec97b/images/10cm-speaker-adapter-mount-1_1777881089953_p3flsj.jpg in_stock 13.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/10cm-speaker-adapter-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6661abb2-182f-44dd-979c-b366a162e9d4 2003 Toyota MR2 Spyder Speaker Bracket "A simple 6.5"" speaker bracket for some Toyotas, including the MR2 Spyder. I ran into issues with off-the-shelf brackets sticking out from the door too far. The design, particularly for the shield, is not perfect. I am currently successfully using the bracket without the dust shield in my 2003 MR2 Spyder." https://3dcarparts.org/library/2003/Toyota/MR2%20Spyder/speaker-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/6661abb2-182f-44dd-979c-b366a162e9d4/images/speaker-bracket-1_1777880613608_rg96f4.jpg in_stock 22.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Toyota/MR2%20Spyder/speaker-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-94ef5ee4-dc97-48e6-af03-9827d813b9e4 1990 Toyota Hiace Dash Switch Hole Plug "Plug to cover switch hole in Toyota dash.
Should fit Toyota's around 1990 to early 2000, made for my 1997 Hiace van." https://3dcarparts.org/library/1990/Toyota/Hiace/dash-switch-hole-plug https://r2-upload.3dcarparts.workers.dev/file/parts/94ef5ee4-dc97-48e6-af03-9827d813b9e4/images/dash-switch-hole-plug-1_1777880610224_kt3c7p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Toyota/Hiace/dash-switch-hole-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-984e3b32-47aa-45c9-8795-f39e7ca66d03 2008 Toyota Matrix Switch Blank "Switch blank for 2008+ Toyota Matrix
One is solid
The other one has a 1/4"" hole and a 7/16"" nut goes behind it
(For mounting phone holder or camera)" https://3dcarparts.org/library/2008/Toyota/Matrix/switch-blank https://r2-upload.3dcarparts.workers.dev/file/parts/984e3b32-47aa-45c9-8795-f39e7ca66d03/images/switch-blank-1_1777880605377_ps0oen.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Toyota/Matrix/switch-blank?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-77d0c8da-d616-4f5d-bea2-fb6a6c7f776c 1996 BMW Z3 Side Pocket Cup Holder Mine car did not have cup holder so I printed one. It fits into stock arm-side pocket tightly. https://3dcarparts.org/library/1996/BMW/Z3/side-pocket-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/77d0c8da-d616-4f5d-bea2-fb6a6c7f776c/images/side-pocket-cup-holder-1_1777880315093_6xba31.jpg in_stock 28.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/BMW/Z3/side-pocket-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2f18940b-54e8-4c16-be17-806da740de37 1998 BMW 3 Series Rear Ashtray Sliding Door Rear ashtray sliding door replacement for E46. Print using filament that has a high heat resistance. PLA is not recommended. https://3dcarparts.org/library/1998/BMW/3%20Series/rear-ashtray-sliding-door https://r2-upload.3dcarparts.workers.dev/file/parts/2f18940b-54e8-4c16-be17-806da740de37/images/rear-ashtray-sliding-door-1_1777880311978_rtn4lv.jpg in_stock 11.40 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/rear-ashtray-sliding-door?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-287c7772-ba64-4cb0-8d0d-686eec389ba0 1982 BMW 3 Series Under Dash Screw Needed some screws and could not find the right one so here it is if you have a E30! https://3dcarparts.org/library/1982/BMW/3%20Series/under-dash-screw https://r2-upload.3dcarparts.workers.dev/file/parts/287c7772-ba64-4cb0-8d0d-686eec389ba0/images/under-dash-screw-1_1777880308165_ql5pwb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/under-dash-screw?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-02c16f0c-63bb-4a82-91e8-198f8b2daf7a 1995 BMW 5 Series Cup Holder cup holder for BMW e39 https://3dcarparts.org/library/1995/BMW/5%20Series/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/02c16f0c-63bb-4a82-91e8-198f8b2daf7a/images/cup-holder-1_1777880304553_gorhbs.jpg in_stock 29.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/BMW/5%20Series/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8bfab703-f1d7-4609-923e-a917b01535f7 2005 BMW 3 Series Headlight access cover "Here I leave the headlight cover, located on the mudguard of the front wheel, it is a piece very easy to lose and so I leave here the model to be able to print your own covers. Mine is already 1 month and I have not lost it or left it, my BMW is an E91, but I think it works for all E90 series.
I leave the files in SolidWorks if you want to improve them.
Good prints!!
Greetings BMW" https://3dcarparts.org/library/2005/BMW/3%20Series/headlight-access-cover https://r2-upload.3dcarparts.workers.dev/file/parts/8bfab703-f1d7-4609-923e-a917b01535f7/images/headlight-access-cover-1_1777880299967_3nmofw.jpg in_stock 16.51 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/BMW/3%20Series/headlight-access-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-acd90479-52fd-4ddb-a62a-f6a05cc1cb8d 1988 BMW 5 Series Cup Holder "[edited Feb 21, 2019 - See bottom of description]
This is a cup holder for my 1990 BMW 525i. This car model is part of BMW's ""E34 series"" that was manufactured for almost a decade during the 1980s and 1990s. It is a fantastic car (I still have mine after 29 years), but it has absolutely no cup holders, and the center console only has the small knick-knack holder (see first picture) which is not large enough to accept even a Starbucks paper cup, much less a real coffee mug or bottle.
This is a two part design. The bottom part is designed to fit snugly into the center console, with a foot to prevent tipping. The top part has a 64 mm base that is roughly the width of a Starbucks paper cup, but then tapers outwards. There is then a second level that opens up to 82 mm which is just a little larger than the standard 80 mm coffee cup. There is an opening on the side for a handle.
The two parts press together quite tightly, but can be glued (recommended) to make them one piece.
In addition to the two STL files, I've included the Fusion 360 f3d file for those who want to modify the design. This is a parameter-drive f3d file so you can do most modifications simply by entering new parameters, rather than editing the model itself.
[edit]Changes from original design:
1. I added a foot to keep it from tipping.
2. I slightly increased the width and adjusted the height for a better fit. You should fit the top and bottom pieces together while the base is mounted in the console because the depth of every console will be marginally different. Do the fitting so the bottom of the upper part just rests on the sides of the console. When you have this just right, carefully remove the two pieces that are now press-fit together and apply a few drops of superglue to keep the top and bottom together at exactly the right place. Just apply the drops along the edges, and capillary action will draw the glue into the seam.
3. I added a 5mm-tall small base to keep the curved bottom sides of the console from lifting the base off the ground. In other words, the top part of the base needs to press snugly against the console sides, but the bottom of the base needs to be smaller to avoid the console bottom contour. I thought about just making the bottom rounded (fillet), but it was too hard to match the contour of the rounded console bottom.
4. I increased the top diameter in order to accommodate a standard coffee mug base.
5. I slightly increased the size of the cup bottom from 62 to 64 mm. Most Starbucks containers are 62 mm, but I have various thermoses and other bottles that require a little more room.
6. I increased the paper cup taper from 4 to 5.5 degrees to accommodate wider, taller cups." https://3dcarparts.org/library/1988/BMW/5%20Series/cup-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/acd90479-52fd-4ddb-a62a-f6a05cc1cb8d/images/cup-holder-2-1_1777880295311_xa7wln.jpg in_stock 18.74 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1988/BMW/5%20Series/cup-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4e0f88dd-3146-47c7-b09f-2aef0fc3c69c 2005 BMW 3 Series Trunk Hook "Can be installed in preexisting holes, no drilling necessary.
BOM:
2 x M4x10 screws
1 x M4x50 screw
3 x M4 nuts" https://3dcarparts.org/library/2005/BMW/3%20Series/trunk-hook https://r2-upload.3dcarparts.workers.dev/file/parts/4e0f88dd-3146-47c7-b09f-2aef0fc3c69c/images/trunk-hook-1_1777880288567_km0hq7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/BMW/3%20Series/trunk-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-45f774e8-cae9-4520-8568-ba4d0229f528 2017 Skoda Kodiaq Cup Holder Сup holders are more spaced out for 2 large glasses. There are also 2 large compartments for stuff. https://3dcarparts.org/library/2017/Skoda/Kodiaq/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/45f774e8-cae9-4520-8568-ba4d0229f528/images/cup-holder-1_1777880021906_su3z84.jpg in_stock 34.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Skoda/Kodiaq/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-39cdae5c-11d4-4bec-ae55-a3f27ce17949 1990 BMW 3 Series Wiper Arm Nut Cover Replacement Windshield wiper arm nut cover for an BMW E36. I accidentally dropped one in the engine bay while working on the wipers. The cover was never to be seen again. Buying a new one costs about $15 for one ( yeah ok...) so I designed one. Its a tight fit so as to keep the moisture out. Used black ABS, sanded and wiped with acetone. https://3dcarparts.org/library/1990/BMW/3%20Series/wiper-arm-nut-cover https://r2-upload.3dcarparts.workers.dev/file/parts/39cdae5c-11d4-4bec-ae55-a3f27ce17949/images/wiper-arm-nut-cover-1_1777880018500_ci2ey2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/BMW/3%20Series/wiper-arm-nut-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8571b806-a265-4a39-a6ce-40a48b6cc892 1990 BMW 3 Series Door Clip Door clip BMW E36 https://3dcarparts.org/library/1990/BMW/3%20Series/door-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8571b806-a265-4a39-a6ce-40a48b6cc892/images/door-clip-1_1777880014746_izr4ah.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/BMW/3%20Series/door-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5dab6076-e9c4-4918-94e4-449f0832c1d5 2003 BMW 5 Series Boot / Trunk Panel Clip "This is a 3D model of the original boot / trunk clips in a BMW E60.
The clip holds the side panels in the boot of the car." https://3dcarparts.org/library/2003/BMW/5%20Series/boot-trunk-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5dab6076-e9c4-4918-94e4-449f0832c1d5/images/boot-trunk-panel-clip-1_1777880011395_ak1oxp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/BMW/5%20Series/boot-trunk-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0dbe8c34-0d4a-4aee-b697-fd7ea432784f 2005 BMW 3 Series Plastic Nut for Undertray and Splashguard "The is a model of a BMW E90 plastic nut. These nuts are used in the undertray, splashguard and several other places in the vehicle.
The nut itself is unthreaded since it is screwed onto a thread cutting fastener. The inner diameter of the nut is 4.25mm. The nut fits a 10mm wrench." https://3dcarparts.org/library/2005/BMW/3%20Series/plastic-nut-for-undertray-and-splashguard https://r2-upload.3dcarparts.workers.dev/file/parts/0dbe8c34-0d4a-4aee-b697-fd7ea432784f/images/plastic-nut-for-undertray-and-splashguard-1_1777880007979_zrh8ij.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/BMW/3%20Series/plastic-nut-for-undertray-and-splashguard?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a629d73e-5b03-41ac-b47a-7c0e0891350b 1996 BMW 5 Series Headlamp Adjuster "These headlamp adjusters are for the BMW pre-facelift E39 series (5-series from 1996 onwards). The originals are made of some material that gets super brittle with age, and pretty much self destruct. Thus making the headlamps aim far too low, and wobble when driving over the slightest dump.
BMWs own solution is to supply new lamps as complete units, price probably approaching $1000.
To fix, you need to take the headlamp units apart, which is actually quite easy. There are various instructions on the net, The two manual adjusters simply fully unscrew to release. The third adjuster, connected to a motor, is released by turning the exposed 5mm plastic nut 90 degrees (not all variants have this feature). One word of warning: Do not touch the reflectors, they are very easily destroyed by attempts of cleaning.
You need one of each of these per side. They will work for the early halogen units, but may need modification for ""angel eyes"", and I have no idea about Xenon. Note also that the shape is different from the originals. I believe these may be slightly better - the originals were limited by what you could do with casting.
For best strength you should ideally print them laying down, but then some support is needed.
They will print fine standing up, but then they will not be as strong. The diameter and shape of the top ball is quite critical to get a suitably tight fit. Use a really healthy shell thickness and good infill, for strength.
ABS and ASA are probably good choices for material. PLA is easy, but is not as heat resistant and may degrade over time, and be a bit too brittle. PETG may also work. Probably Nylon would be good too." https://3dcarparts.org/library/1996/BMW/5%20Series/headlamp-adjuster https://r2-upload.3dcarparts.workers.dev/file/parts/a629d73e-5b03-41ac-b47a-7c0e0891350b/images/headlamp-adjuster-1_1777879998583_muzr3b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1996/BMW/5%20Series/headlamp-adjuster?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bfd2bab5-7834-41e3-ba94-25aeda13a8f9 1982 BMW 3 Series Door Panel Clip clips for BMW E30 https://3dcarparts.org/library/1982/BMW/3%20Series/door-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bfd2bab5-7834-41e3-ba94-25aeda13a8f9/images/door-panel-clip-1_1777879995338_2xlc24.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/door-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a2e79c36-f1bf-4449-8836-569bc0774ef8 1996 Skoda Octavia Empty Button Plug "This is empty button (plug) for Skoda Octavia MK1.
Material: PLA
Support: Yes
Layer: 0.2mm" https://3dcarparts.org/library/1996/Skoda/Octavia/empty-button-plug https://r2-upload.3dcarparts.workers.dev/file/parts/a2e79c36-f1bf-4449-8836-569bc0774ef8/images/empty-button-plug-1_1777879991859_0640e4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Skoda/Octavia/empty-button-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dd6d5a25-25e5-4c0d-9ac3-3034f2aabb7a 2006 Skoda Roomster Parcel Shelf Hinge "This was created as a direct replacement for the factory part because when one of the original parts broke I tried searching for replacements from ebay but didn't have much luck so though about thingverse to see if anyone had already done one, but nope I could find more parts for the Skoda Octavia but very little for the roomster, the one part I did find was the part these mount to so of no use to me.
22/05/2018 Updated the files smoothing some excess print" https://3dcarparts.org/library/2006/Skoda/Roomster/parcel-shelf-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/dd6d5a25-25e5-4c0d-9ac3-3034f2aabb7a/images/parcel-shelf-hinge-1_1777879461369_imwh45.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Skoda/Roomster/parcel-shelf-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a1e8e48f-bbd6-44bf-ae9f-680619283871 1999 Skoda Fabia Drink Holder "This is drink holder for SKODA Fabia Console Phone Holder by giuliopierucci
Can holder is remix from Skoda Fabia 1 cup (can) holder by Bednys
I recommende use of some thermal resistant filament (no PLA)." https://3dcarparts.org/library/1999/Skoda/Fabia/drink-holder https://r2-upload.3dcarparts.workers.dev/file/parts/a1e8e48f-bbd6-44bf-ae9f-680619283871/images/drink-holder-1_1777879453543_v5syb3.jpg in_stock 7.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Skoda/Fabia/drink-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-93d53dbc-4caa-4e47-8b8d-6a045c7e4228 2007 Skoda Fabia Headlamp Cap "This is the headlight cover (lens optics) for the Skoda Fabia mk2.
Designed to fit H7 led bulbs (like this H7 led or similar).
Original covers do not give enough space for a new led bulb radiator." https://3dcarparts.org/library/2007/Skoda/Fabia/headlamp-cap https://r2-upload.3dcarparts.workers.dev/file/parts/93d53dbc-4caa-4e47-8b8d-6a045c7e4228/images/headlamp-cap-1_1777879448789_r3l95j.jpg in_stock 18.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2007/Skoda/Fabia/headlamp-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e7d05ff1-10a6-4dc8-a4b5-890f6ab5722f 1996 Skoda Octavia Car Radio Frame "Car radio frame for 2DIN 7010B mounted to Skoda Octavia 1
https://kolem-domecku.cz/radio-7010b-skoda-octavia-1/" https://3dcarparts.org/library/1996/Skoda/Octavia/car-radio-frame https://r2-upload.3dcarparts.workers.dev/file/parts/e7d05ff1-10a6-4dc8-a4b5-890f6ab5722f/images/car-radio-frame-1_1777879445369_2tqv0z.jpg in_stock 8.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Skoda/Octavia/car-radio-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-23f5e9d3-00b6-4d6f-b661-532ce091029c 2011 Skoda Citigo iPad Mount Adapter Skoda Citigo iPad Mount Adapter for Original Phone Mount https://3dcarparts.org/library/2011/Skoda/Citigo/ipad-mount-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/23f5e9d3-00b6-4d6f-b661-532ce091029c/images/ipad-mount-adapter-1_1777879442040_gi0uom.jpg in_stock 38.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Skoda/Citigo/ipad-mount-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-065f5f2f-0593-41c7-8630-6a5cf3384a77 2019 Skoda Octavia Parcel Shelf String Pin "I lost one of the parcel shelf string pins on my 2019 Octavia so I reverse Engendered a new one. :)
https://www.facebook.com/groups/1691054971130044/learning_content/" https://3dcarparts.org/library/2019/Skoda/Octavia/parcel-shelf-string-pin https://r2-upload.3dcarparts.workers.dev/file/parts/065f5f2f-0593-41c7-8630-6a5cf3384a77/images/parcel-shelf-string-pin-1_1777879117667_u42301.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Skoda/Octavia/parcel-shelf-string-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7b3d0ed6-1821-483d-b79e-91af65473fcf 2009 Skoda Octavia Rear-View Camera Mount Rear-view camera mount for Skoda Octavia A5 FL in the plafond of the license plate illumination. https://3dcarparts.org/library/2009/Skoda/Octavia/rear-view-camera-mount https://r2-upload.3dcarparts.workers.dev/file/parts/7b3d0ed6-1821-483d-b79e-91af65473fcf/images/rear-view-camera-mount-1_1777879113941_tivt8b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Skoda/Octavia/rear-view-camera-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c41e01f-49ca-4f59-b8ff-27f00cab8dfa 1999 Skoda Fabia Console Empty Button An empty console button for Skoda Fabia console (first series). https://3dcarparts.org/library/1999/Skoda/Fabia/console-empty-button https://r2-upload.3dcarparts.workers.dev/file/parts/2c41e01f-49ca-4f59-b8ff-27f00cab8dfa/images/console-empty-button-1_1777879110828_96rp2x.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Skoda/Fabia/console-empty-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40422b62-97e4-4c54-89e5-a049e1d2fe51 2007 Skoda Fabia Hat Rack Holder This is a remixed replacement holder for the hat rack of a Skoda Fabia II Model by danfeu. https://3dcarparts.org/library/2007/Skoda/Fabia/hat-rack-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/40422b62-97e4-4c54-89e5-a049e1d2fe51/images/hat-rack-holder-2-1_1777879106030_auls1b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Skoda/Fabia/hat-rack-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3ea8c0a9-2664-4ba7-9730-d269229940b8 2008 Skoda Superb Reversing Camera Bracket "After viewing [Lutz's excellent tutorial](https://youtu.be/5ZkOjmaM5ZI) on how to add a reversing camera to a Skoda Superb Gen2 I decided to give it a go. I wanted a bracket to hold it in place (similar to the metal one the original boot switch has) rather than just rely on friction like he did, which requires the hole to be perfect size.
I printed this in ABS with 20% infill. It has 4mm walls so should easily be strong enough as long as you don't screw the bolts down too tight.
Camera I used is [this one.](https://www.aliexpress.com/item/OEM-RCD510-RNS315-RNS510-RGB-Rear-View-Camera-Reversing-Camera-with-Cable-Harness-for-VW-Passat/1674071330.html?spm=a2g0s.9042311.0.0.78064c4dPFQPuU)
I've included the Fusion360 file if you need to edit it, or let me know and I'll make any changes you need." https://3dcarparts.org/library/2008/Skoda/Superb/reversing-camera-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/3ea8c0a9-2664-4ba7-9730-d269229940b8/images/reversing-camera-bracket-1_1777879102507_kv2fpj.jpg in_stock 17.37 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2008/Skoda/Superb/reversing-camera-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a8971f4c-df2a-4d7a-92e9-680810b21f11 2014 Skoda Fabia Armrest Organizer "The armrest in my fabia 2014 was one big compartment and not very useful so i made an orginizer for it.
*it probably also fits armrests from other models of skoda/seat and volkswagen but i havnt tested it.
enjoy and feel free to modify it as you want." https://3dcarparts.org/library/2014/Skoda/Fabia/armrest-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/a8971f4c-df2a-4d7a-92e9-680810b21f11/images/armrest-organizer-1_1777878719382_c3hif5.jpg in_stock 21.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Skoda/Fabia/armrest-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c78a72d2-5b21-42f6-acf6-7b1f70c0c752 2014 Skoda Fabia Phone Holder "For Skoda Fabia 3
Phone Support
Wallet
USB charger included" https://3dcarparts.org/library/2014/Skoda/Fabia/phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/c78a72d2-5b21-42f6-acf6-7b1f70c0c752/images/phone-holder-1_1777860294451_ugyi4y.jpg in_stock 17.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Skoda/Fabia/phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f116568a-d828-476c-9d20-9b20beb1c58b 2017 Skoda Karoq / Kodiaq Trunk Rail Hook This is a design based on original part. This hook clamps into boot rail on Skoda Karoq and Skoda Kodiaq. https://3dcarparts.org/library/2017/Skoda/Karoq%20%2F%20Kodiaq/trunk-rail-hook https://r2-upload.3dcarparts.workers.dev/file/parts/f116568a-d828-476c-9d20-9b20beb1c58b/images/trunk-rail-hook-1_1777860290499_mknayy.jpg in_stock 13.18 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Skoda/Karoq%20%2F%20Kodiaq/trunk-rail-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d9325db-52cf-4b06-a76b-89dbdd8d90f2 1999 Skoda Fabia Rear Wiper Cap Rear wiper cap for Skoda Fabia 1st generation. https://3dcarparts.org/library/1999/Skoda/Fabia/rear-wiper-cap https://r2-upload.3dcarparts.workers.dev/file/parts/4d9325db-52cf-4b06-a76b-89dbdd8d90f2/images/rear-wiper-cap-1_1777860286615_8j0cov.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Skoda/Fabia/rear-wiper-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-47c85427-fcd6-4b70-9f1a-794f514ea8f2 2013 Skoda Octavia Front Center Compartment Organizer "Simple organizer for ""front middle"" compartment of Skoda Octavia 3. Might also fit other VW group cars." https://3dcarparts.org/library/2013/Skoda/Octavia/front-center-compartment-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/47c85427-fcd6-4b70-9f1a-794f514ea8f2/images/front-center-compartment-organizer-1_1777860247690_12taci.jpg in_stock 15.77 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Skoda/Octavia/front-center-compartment-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4353941a-ff55-4621-86ba-9551f5a4fcc1 2007 Skoda Fabia Hat Rack Holder "Replacement rack holder for Skoda Fabia II.
Model in the provided STL file is for the **right side** only! Mirror it before printing if you need this holder for the left side.
I used 3x8 mm rivets to fix holder in place. In addition I applied some epoxy glue just to be sure." https://3dcarparts.org/library/2007/Skoda/Fabia/hat-rack-holder https://r2-upload.3dcarparts.workers.dev/file/parts/4353941a-ff55-4621-86ba-9551f5a4fcc1/images/hat-rack-holder-1_1777860220104_d3bz2g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Skoda/Fabia/hat-rack-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cbc34c01-011d-4495-8847-223ffeffab41 1998 Skoda Octavia Air Vent Deflector Trim Strip Strip for the deflector on the Skoda Octavia, 1998 model year. Print with ABS plastic; PLA will deform from heat. https://3dcarparts.org/library/1998/Skoda/Octavia/air-vent-deflector-trim-strip https://r2-upload.3dcarparts.workers.dev/file/parts/cbc34c01-011d-4495-8847-223ffeffab41/images/air-vent-deflector-trim-strip-1_1777860212978_s9r9wb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Skoda/Octavia/air-vent-deflector-trim-strip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-37acf3d5-ddfc-4675-b974-4aec2cd31ecd 2015 Skoda Yeti Door Pocket Organiser "Door pocket divders to keep you junk separated and stop it sliding forwards and backwards. They are a little short if put towards the front but this is because the bottom of the door pocket slopes.
Antibac gel holder.
Rubber Band Clip, use 2 of these and a rubber band to secure items.
STL of the clip so you can design you own accessories.
All clip in really securely in my 2015 Yeti." https://3dcarparts.org/library/2015/Skoda/Yeti/door-pocket-organiser https://r2-upload.3dcarparts.workers.dev/file/parts/37acf3d5-ddfc-4675-b974-4aec2cd31ecd/images/door-pocket-organiser-1_1777860205199_mc949l.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Skoda/Yeti/door-pocket-organiser?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf4c0833-beef-4cd0-8bca-4c1e99645235 1999 Skoda Fabia Passenger Storage Door Cup Holder "Skoda Fabia 1 cup (can) holder. Internal diameter 70mm (all standart 65mm dia cans fit into that).
Mounted on passenger storage door. Be carefull when opening storage door.
Printed with PLA 0,3mm layer.
Print upside down. No supports needed." https://3dcarparts.org/library/1999/Skoda/Fabia/passenger-storage-door-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/bf4c0833-beef-4cd0-8bca-4c1e99645235/images/passenger-storage-door-cup-holder-1_1777860194168_knrtui.jpg in_stock 17.97 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Skoda/Fabia/passenger-storage-door-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2cfc9ba3-3e30-4ecb-adb3-b0c32e515b35 2013 Subaru Legacy Sunglasses Holder This is a extended sunglasses holder that I reverse engineered from my 2013 Subaru Legacy. The original was just not big enough to fit my sunglasses so i decided to make a bigger and better one. Everything works the same as the original, the latch still catches when closed and the spring still pushes and keeps it down. All the parts are designed to be printed without supports except for the bottom part which has built in supports that snap off very nicely. Use a brim when printing the top and bottom parts to help with adhesion to the bed. Assembly is easy with built in guide pins to position the top and bottom parts and the two side parts have tabs on them that position them nicly, just a few dabs of glue in between the parts and you will be good to go. Do not use PLA if you live in a part of the country that your car will get hot, the material will warp, trust me I know ha ha. I used Colorfab XT and had no problems.I know that it will fit in a 2013 Legacy I cant guarantee any other models, if someone tries it out on something else and it works then let me know and I will put it in the description. https://3dcarparts.org/library/2013/Subaru/Legacy/sunglasses-holder https://r2-upload.3dcarparts.workers.dev/file/parts/2cfc9ba3-3e30-4ecb-adb3-b0c32e515b35/images/sunglasses-holder-1_1777859910151_npcy3c.jpg in_stock 12.46 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Subaru/Legacy/sunglasses-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2a65d0c8-d7ff-4c04-9da5-aacec790f711 2011 Subaru Forester Center Console Shelf "Center console shelf designed for a 2011 Subaru Forrester. I'm not sure what other model years this will fit.
28g @100% infill (for both pieces)" https://3dcarparts.org/library/2011/Subaru/Forester/center-console-shelf https://r2-upload.3dcarparts.workers.dev/file/parts/2a65d0c8-d7ff-4c04-9da5-aacec790f711/images/center-console-shelf-1_1777859904795_pjfl18.jpg in_stock 12.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Forester/center-console-shelf?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-554c0722-0f37-46eb-b291-6e61ef009706 2003 Subaru Legacy/Outback Cup Holder Sliding Cover "This cover can be used to replace the original part of the cup holder in the center console of Subaru Legacy/Outback models from 2003-2009 (BL/BP) and Subaru Impreza WRX models from 2008-2014. The original part tends to become brittle over time.
I tested it first with PETG filament but had mixed results with it (one part started to warp after a few months and broke). After that, I changed to Polypropylene (PP) which works a lot better. I have two of these parts in use for over a year now and there are no signs of failure.
The ""flexible filament"" file has a thicker central layer." https://3dcarparts.org/library/2003/Subaru/Legacy%2FOutback/cup-holder-sliding-cover https://r2-upload.3dcarparts.workers.dev/file/parts/554c0722-0f37-46eb-b291-6e61ef009706/images/cup-holder-sliding-cover-1_1777859888253_vxkdfh.jpg in_stock 22.73 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Subaru/Legacy%2FOutback/cup-holder-sliding-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-31bcbfb1-217d-4e55-8bf0-3b74d5feeef2 2003 Subaru Legacy Front Door Speaker Adapter Plates "These are used to hold aftermarket speakers. These replace the factory mounts directly in the front driver/passenger doors. I have been using these with Pioneer TS-D1602R 6.5"" in a 2003 Subaru Legacy for months with no issues.
I don't know which vehicles these are compatible with, but I would expect many Subarus are compatible!
Features ABS recycling logo from Michigan Tech's MOST lab. I would recommend printing in ABS due to its flexibility (see the instructions tab)." https://3dcarparts.org/library/2003/Subaru/Legacy/front-door-speaker-adapter-plates https://r2-upload.3dcarparts.workers.dev/file/parts/31bcbfb1-217d-4e55-8bf0-3b74d5feeef2/images/front-door-speaker-adapter-plates-1_1777859868865_3vexd7.jpg in_stock 16.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Subaru/Legacy/front-door-speaker-adapter-plates?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-09219db7-f084-4ff3-b21a-d38e246494d8 2007 Subaru Impreza WRX Cooling Hose Holder (Air Filter Box) "This is the holder that holds cooling hose on the air filter box from Subaru Impreza WRX 2007.
In almost all Subarus, it breaks." https://3dcarparts.org/library/2007/Subaru/Impreza%20WRX/cooling-hose-holder-air-filter-box https://r2-upload.3dcarparts.workers.dev/file/parts/09219db7-f084-4ff3-b21a-d38e246494d8/images/cooling-hose-holder-air-filter-box-1_1777859865457_xeuc0s.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Subaru/Impreza%20WRX/cooling-hose-holder-air-filter-box?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a999acaa-2d73-4b49-84fa-3e7f7a218ade 2011 Subaru Outback Floor Cover Hook This is a replacement hook that holds up the back floor that covers the storage area in a Subaru outback. Printed it for my 2011. https://3dcarparts.org/library/2011/Subaru/Outback/floor-cover-hook https://r2-upload.3dcarparts.workers.dev/file/parts/a999acaa-2d73-4b49-84fa-3e7f7a218ade/images/floor-cover-hook-1_1777859860458_cp18st.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Outback/floor-cover-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2e9e22e9-3ff2-4f69-95e4-734059ae0aaa 1997 Volkswagen Golf Ashtray replacement USB/voltmeter insert "First try of an ashtray replacement with double USB/Battery indicator and deposit for VW Golf MK4.
Parts on Ebay
LCD Lead Acid Battery Capacity Display 12-84V Voltmeter
https://www.ebay.de/itm/12-48V-LCD-Anzeige-Autobatterie-Kapazitat-Spannung-Tester-Blei-Saure-Monitor-Kit/223201169409?hash=item33f7d39001:m:mBhz_g6QIMXKgzRtd4dSuiw
LED Digital Voltmeter Car Cigarette Lighter Socket 2 USB 3.1A
https://www.ebay.de/itm/LED-Digital-Voltmeter-Auto-Zigarettenanzunder-Steckdose-2-USB-3-1A-KFZ-Ladegerat/274119308307?hash=item3fd2c8b413:m:mZFN-Qbi_GHk39dSQb34dLw
Have fun" https://3dcarparts.org/library/1997/Volkswagen/Golf/ashtray-replacement-usbvoltmeter-insert https://r2-upload.3dcarparts.workers.dev/file/parts/2e9e22e9-3ff2-4f69-95e4-734059ae0aaa/images/ashtray-replacement-usbvoltmeter-insert-1_1777859856647_uh34k8.jpg in_stock 27.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Volkswagen/Golf/ashtray-replacement-usbvoltmeter-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b8ac87c6-6e18-4823-b83b-6c0610b132b7 1978 Subaru Brumby Sun Visor Clip "This is the sun visor clip for a Subaru Brumby/Brat to replace the ones that were broken.
I designed this using Fusion 360" https://3dcarparts.org/library/1978/Subaru/Brumby/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b8ac87c6-6e18-4823-b83b-6c0610b132b7/images/sun-visor-clip-1_1777859630167_ig88lr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1978/Subaru/Brumby/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-07982db3-d7b6-41fb-8ecf-a9e15cfbf61b 2007 Subaru Impreza Gear Shift Knob This is a gear shift knob for my 2007 Subaru Impreza. This is designed for a M10x1.5 threaded shifter. https://3dcarparts.org/library/2007/Subaru/Impreza/gear-shift-knob https://r2-upload.3dcarparts.workers.dev/file/parts/07982db3-d7b6-41fb-8ecf-a9e15cfbf61b/images/gear-shift-knob-1_1777859626277_nzit78.jpg in_stock 18.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Subaru/Impreza/gear-shift-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4a1402c4-4676-497b-bfba-7c8680ce8da5 2006 Subaru Baja Front Door Speaker Brackets I'm sharing some speaker brackets I printed for a 2006 Subaru Baja. Compare your door with the picture to see if it will work in yours. https://3dcarparts.org/library/2006/Subaru/Baja/front-door-speaker-brackets https://r2-upload.3dcarparts.workers.dev/file/parts/4a1402c4-4676-497b-bfba-7c8680ce8da5/images/front-door-speaker-brackets-1_1777859620660_4p8kuh.jpg in_stock 20.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Subaru/Baja/front-door-speaker-brackets?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12700b3d-5cae-4c96-806b-e0a0f8d8eeb6 1987 Nissan Patrol Switch Cover "Switch cover for GQ Patrol. I made this up as a base so I could make other mounts and brackets that fit into the stock spaces.
It's possible that this will fit more than just a Patrol. It looks to be a fairly standard switch size as I have some off the shelf Narva switches installed. Have a look at http://www.narva.com.au/products/browse/standard, the specific one is _63020BL_." https://3dcarparts.org/library/1987/Nissan/Patrol/switch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/12700b3d-5cae-4c96-806b-e0a0f8d8eeb6/images/switch-cover-1_1777859485085_p9h2tm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Nissan/Patrol/switch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6f9102c3-cf45-47e1-9d10-7620be05dde7 1991 Nissan D21 Air Vent Frame "Air vent frame for Nissan d21/hardbody
for my d21 1991, prob. fits a lot of Nissans from the same era.
""ös""= force(was quicker to write that instead of doing the airflow thing)
sldprt file included for easy mod." https://3dcarparts.org/library/1991/Nissan/D21/air-vent-frame https://r2-upload.3dcarparts.workers.dev/file/parts/6f9102c3-cf45-47e1-9d10-7620be05dde7/images/air-vent-frame-1_1777859481456_6orpgi.jpg in_stock 9.91 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Nissan/D21/air-vent-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7bf0b335-bb84-49e9-a20f-623ca3c84e4a 2002 Nissan Micra Hood Prop Retaining Clip Holder for bonnet support stick in Nissan Micra k12. I've mounted it with a little help of hammer. https://3dcarparts.org/library/2002/Nissan/Micra/hood-prop-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7bf0b335-bb84-49e9-a20f-623ca3c84e4a/images/hood-prop-retaining-clip-1_1777859477591_l91bvn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Nissan/Micra/hood-prop-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-82577671-b1b7-494b-bf13-5634da654656 1994 Nissan Hardbody Cup Holder / Coin Tray Replaces the ash tray in 1994 Nissan Hardbody with a much needed cup holder. Stick the pegs located on the coin tray into the holes on the back of the cup holder and secure with glue, super glue works well, ensure it stays together while glue dries. Standard file includes the D21 text on the front of the cup holder, STL with the front blank is included as well as a STEP file so you can add your own text or logo. https://3dcarparts.org/library/1994/Nissan/Hardbody/cup-holder-coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/82577671-b1b7-494b-bf13-5634da654656/images/cup-holder-coin-tray-1_1777859241470_wgjnqs.jpg in_stock 38.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Nissan/Hardbody/cup-holder-coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d1891a82-1bff-4cdf-9638-6382c52433a4 2008 Nissan Altima Blank Button Insert I needed a better solution than drilling for fitting some switches to the interior of the car. I just used generic analog switches. All are welcome to remix and modify the file for their needs. I designed this for my '08 Nissan Altima, but it should work on all applicable Nissans and Infinitis. https://3dcarparts.org/library/2008/Nissan/Altima/blank-button-insert https://r2-upload.3dcarparts.workers.dev/file/parts/d1891a82-1bff-4cdf-9638-6382c52433a4/images/blank-button-insert-1_1777859238379_ywvtu2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Nissan/Altima/blank-button-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40bbdb21-af66-45dd-a6ae-244dfd2296f7 2005 Nissan Frontier USB AUX Switch Mount "Remixed this to mount a USB and Aux port from my GROM BT3 with the USB and Aux addon kit. This should work with any USB and 3.5mm Aux addon kit.
I couldn't find a USB/AUX switch for a 2005 Nissan Frontier, but I found a ton for Toyota. So I bought this Thing from Amazon:
https://www.amazon.com/gp/product/B06XYK8T3W/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
It has a single mounting screw and can be remounted into this remix. I did notice that the cable on the back of the item I bought from amazon does come off easily you could use some hot glue to glue it in place or I used some Kapton tape. Unfortunately that is how the Toyota piece came and there isn't much I can do about that." https://3dcarparts.org/library/2005/Nissan/Frontier/usb-aux-switch-mount https://r2-upload.3dcarparts.workers.dev/file/parts/40bbdb21-af66-45dd-a6ae-244dfd2296f7/images/usb-aux-switch-mount-1_1777859235175_7fhcki.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Nissan/Frontier/usb-aux-switch-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9f105588-e417-4f12-85a0-bf6ea2e64ecf 1991 Nissan D21 Air Vent "I have a 1991 Nissan D1 (hardbody) that had broken air vents due to age. I decided to make both the cover and the actual vent. The cover clips to the dampener but it is a snug fit to install, probably easier in warmer weather since it will soften the vinyl some. For the vent itself, I tried to give it 0.25 gap in between the moving parts that move the louvers up and down, but either my printer is not that precise or it is not enough of a gap.
Vent Cover: I would suggest printing the vent cover flat side down for a smoother finish and no supports will be needed.
Vent: I printed this with the adjustment handle facing up with supports to get a smooth finish. In the picture one is the original the other is printed, can you tell which is which?
I printed these in black PLA since it was more like a prototype, but I know it won't hold up to well in the heat. Now that I know it fits and looks pretty good I will print them again in ABS or PETG for more durability. I will post pictures of install if interested.
Thanks, and enjoy!" https://3dcarparts.org/library/1991/Nissan/D21/air-vent https://r2-upload.3dcarparts.workers.dev/file/parts/9f105588-e417-4f12-85a0-bf6ea2e64ecf/images/air-vent-1_1777859229512_wzuqil.jpg in_stock 8.74 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Nissan/D21/air-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2e2a83e0-253f-4097-aca1-3ef265dfe81f 2013 Nissan Leaf Coin Tray "This is a coin tray for the Nissan Leaf S 2015. I would assume that it fits all Nissan leaf from 2011-2017, but maybe they have various versions of the center console, I really don't know.
Since there is nowhere to put any coins except loosely at the bottom of the center console, I remixed my own tray I did for the Mazda 6 to fit my newly acquired Leaf (amazing car if you don't think of its look!). Took me 5 tries before I got all the angles just right...
**April 23 2017: On request, I added a tray without the dividers in, if you want to put something bigger than coins. I also made one with just 1 divider, for a mix of big and small stuff :)" https://3dcarparts.org/library/2013/Nissan/Leaf/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/2e2a83e0-253f-4097-aca1-3ef265dfe81f/images/coin-tray-1_1777859219759_nyueie.jpg in_stock 17.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Nissan/Leaf/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-69a0eb6c-f15a-47de-94c8-082bea0d4c88 2009 Nissan 370Z Hood Prop Rod Clip I made this for my Nissan 370Z. It might work for other Nissan vehicles too. https://3dcarparts.org/library/2009/Nissan/370Z/hood-prop-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/69a0eb6c-f15a-47de-94c8-082bea0d4c88/images/hood-prop-rod-clip-1_1777859043395_uw2zq5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Nissan/370Z/hood-prop-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5fe43d1d-4dc2-4405-a718-a4ee86e87693 2011 Nissan Leaf Grocery Bag Clip Grocery bag clip for a 2011 Nissan Leaf to help keep groceries contained. Fits the rear vent slots. https://3dcarparts.org/library/2011/Nissan/Leaf/grocery-bag-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5fe43d1d-4dc2-4405-a718-a4ee86e87693/images/grocery-bag-clip-1_1777859038561_7gn40z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Nissan/Leaf/grocery-bag-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b72e054f-d461-44e3-a6ef-4e5743b43bb9 2004 Nissan Pulsar Bonnet Clip "Made for a friends 2004 Nissan Pulsar to replace a broken bonnet clip.
I used a support where the small amount of overhang is." https://3dcarparts.org/library/2004/Nissan/Pulsar/bonnet-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b72e054f-d461-44e3-a6ef-4e5743b43bb9/images/bonnet-clip-1_1777859034695_5eji6x.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Nissan/Pulsar/bonnet-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5d7c57c2-d22b-48e5-b896-0f640e57a440 1997 Volkswagen Golf Hood Opener Latch Volkswagen Golf Mk4 hood opener latch https://3dcarparts.org/library/1997/Volkswagen/Golf/hood-opener-latch https://r2-upload.3dcarparts.workers.dev/file/parts/5d7c57c2-d22b-48e5-b896-0f640e57a440/images/hood-opener-latch-1_1777858960854_8lx08z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Volkswagen/Golf/hood-opener-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4baa8951-75ad-4292-9e63-38e665dc342b 1983 Volkswagen Golf Center Vent 52mm Auxiliary Gauge Holder "Auxiliary instrument holder as a replacement for the center air vents.
For 52mm instruments." https://3dcarparts.org/library/1983/Volkswagen/Golf/center-vent-52mm-auxiliary-gauge-holder https://r2-upload.3dcarparts.workers.dev/file/parts/4baa8951-75ad-4292-9e63-38e665dc342b/images/center-vent-52mm-auxiliary-gauge-holder-1_1777858953421_46pr1r.jpg in_stock 26.12 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/center-vent-52mm-auxiliary-gauge-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c50747e-21d2-4191-af56-21e1dd2c9ec1 1983 Volkswagen Golf Central Console Instrument Panel Plates "This is a 3D-Printable plate for the centralconsole of the Golf/Rabbit Mk2.
Best choise for adding instruments to your Golf/Rabbit !
Normal instruments are 52mm (2 Inch).
There are several versions. Please contact me if you have any ideas or suggestions on this ;)
Screws needed are 3-4mm (1/10inch - 1/6inch) plastic or sheetscrews
First of all print the holders and the alignment-plate. Screw the holders to the alignment-plate (you need to gauge them to fit to the alignment-plate).
Then stick the plate into the console as shown on the pictures and screw the holders to the central console (ratchet or short screwdriver needed).
Remove the alignment-plate and screw on the plate you want. You can also use the alignment-plate as a pattern to use wood or such.
Have fun.
Edit. Actually put that in my car LOL. Works nice :D" https://3dcarparts.org/library/1983/Volkswagen/Golf/central-console-instrument-panel-plates https://r2-upload.3dcarparts.workers.dev/file/parts/2c50747e-21d2-4191-af56-21e1dd2c9ec1/images/central-console-instrument-panel-plates-1_1777858927467_v8r7bn.jpg in_stock 8.84 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/central-console-instrument-panel-plates?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-80aa98b8-655f-4d7f-86f2-5400b555bc8d 1983 Volkswagen Golf Cup Holder Fit for Golf MK2 https://3dcarparts.org/library/1983/Volkswagen/Golf/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/80aa98b8-655f-4d7f-86f2-5400b555bc8d/images/cup-holder-1_1777858921871_pbyw9d.jpg in_stock 13.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Volkswagen/Golf/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3f77d788-aeb5-4631-8e18-4fcc9fb7b0df 2005 Honda Civic Interior Door Handle A door handle for Honda Civic 2005 https://3dcarparts.org/library/2005/Honda/Civic/interior-door-handle https://r2-upload.3dcarparts.workers.dev/file/parts/3f77d788-aeb5-4631-8e18-4fcc9fb7b0df/images/interior-door-handle-1_1777858353860_lp5ibj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Honda/Civic/interior-door-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-980cc38f-f3f4-4c1e-b022-144d3b63a484 1983 Mercedes-Benz S-Class Sun Visor Clip "This is a replacement sunvisor clip for a Mercedes-Benz** w126 (S-class 1983-1991). The driver-side clip in my 300SE cracked due to age and overuse, so I set about designing a replacement.
This clip is not a perfect replica of the original, but is close enough in appearance (especially once installed) to be noticed by only the most discerning eye. It has been designed to function as per the original, and be easy to print easily. Several revisions of the design were tested, and this was the final and best performer.
The model comes with some support features, which have proven successful. I have also provided a 'no support' model if required.
I recommend for beige or tan interiors such as mine, where finding a matching filament is difficult, to print the clip in black, as this matches many other trim details in the roof panel (e.g. the centre light cluster).
** No affiliation" https://3dcarparts.org/library/1983/Mercedes-Benz/S-Class/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/980cc38f-f3f4-4c1e-b022-144d3b63a484/images/sun-visor-clip-1_1777858279674_7hn0m0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Mercedes-Benz/S-Class/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e2eb2df2-be9d-4589-8a49-7041c6aa9fa9 2014 Audi A7 Screen Wash Funnel "After struggling to top up the screen wash in my car without it going all over the place, I decided that it called for a bespoke funnel to make the task easier. It is designed around a 2014 Audi A7 which has the screen wash bottle right next to one of the bonnet hinges making it awkward to pour from a 5 litre container.
The spout fits neatly into the filler neck of the bottle whilst the incorporated stand helps to steady the funnel leaving both hands free for pouring.
First world problems and all that, but hey, I've got a 3D printer so why not.
Version 2 - Although my original design seemed to work quite well, and judging by the amount of downloads it's had it's also helped others too, but there was one small design tweak that I felt was needed to optimise the design. I've now added a small vent to allow the air to escape as the washer bottle is filled with screenwash. I haven't tried it yet, but I've no reason to think that it wouldn't work." https://3dcarparts.org/library/2014/Audi/A7/screen-wash-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/e2eb2df2-be9d-4589-8a49-7041c6aa9fa9/images/screen-wash-funnel-1_1777858129296_9qz9pm.jpg in_stock 21.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2014/Audi/A7/screen-wash-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ab6c47be-2997-435e-a8fb-dd53ce63364e 2003 Audi A3 Cup Holder "Hey, this is a Cup Holder for an Audi A3. You need only manuell support on the left side.
The two holes are for zip tiles. (If you need)" https://3dcarparts.org/library/2003/Audi/A3/cup-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/ab6c47be-2997-435e-a8fb-dd53ce63364e/images/cup-holder-2-1_1777858125834_n7foqd.jpg in_stock 28.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Audi/A3/cup-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a6671b93-6ab3-468e-90b8-9258cd1bd2c9 2011 Audi A6 AdBlue Cap Wrench "This is a wrench for opening the Adblue cap of the Audi A6 (model C7).
You can spin it around continuously when opening or closing.
I have designed it because I did not want to use the wheel wrench which can provide too much torque and is too big to turn around continuously.
If you have another car with a 17mm cap, it may fit to yours, as well.
Important parameters for printing
History
Version 1.0.0
First design" https://3dcarparts.org/library/2011/Audi/A6/adblue-cap-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/a6671b93-6ab3-468e-90b8-9258cd1bd2c9/images/adblue-cap-wrench-1_1777858122138_4lz7mm.jpg in_stock 24.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2011/Audi/A6/adblue-cap-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c73bd07d-a437-459b-82f1-107c9987716a 1996 Audi A3 Cup Holder Retrofit cupholder for the door pockets of an Audi A3 8L (1996 - 2003). Fits most standard sized cups, bottles and coffee mugs. https://3dcarparts.org/library/1996/Audi/A3/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/c73bd07d-a437-459b-82f1-107c9987716a/images/cup-holder-1_1777858109736_0z6sug.jpg in_stock 8.51 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Audi/A3/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-78d097af-04a9-429c-b2e1-73b2f73a6317 2003 Audi A3 Cup Holder my dad wanted a cup holder for his Audi A3 8P as it doesn't have any so i designed this to fit in coin pocket https://3dcarparts.org/library/2003/Audi/A3/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/78d097af-04a9-429c-b2e1-73b2f73a6317/images/cup-holder-1_1777857967780_vinx7a.jpg in_stock 19.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Audi/A3/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3d9f744f-f27f-45a8-977c-5118277f5dbb 2012 Audi A6 Gas Cap Tether Gas Cap Tether for 2012 Audi A6. Should work with other car models too. Part Number on the gas cap is 3C0 20 553L. You must print in TPU or another flexible filament! PLA or ABS are too rigid for this purpose and will snap. https://3dcarparts.org/library/2012/Audi/A6/gas-cap-tether https://r2-upload.3dcarparts.workers.dev/file/parts/3d9f744f-f27f-45a8-977c-5118277f5dbb/images/gas-cap-tether-1_1777857963038_mtvfn5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Audi/A6/gas-cap-tether?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6042b907-7f37-476a-843c-6f5816a5f162 2004 Audi A3 Fuel Filler Cap Ring "Hi Guys,
here is the Filler / Fuel Cap Ring for an Audi A3 BJ2004" https://3dcarparts.org/library/2004/Audi/A3/fuel-filler-cap-ring https://r2-upload.3dcarparts.workers.dev/file/parts/6042b907-7f37-476a-843c-6f5816a5f162/images/fuel-filler-cap-ring-1_1777857956975_q8vpdg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Audi/A3/fuel-filler-cap-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-39d8a1d1-3d9a-4789-b523-8a166ddad1bb 2001 Audi A4 Armrest Lid Latch "Audi A4 B6/B7 and Seat Exeo Armrest Lid Latch
Some fellows from my Audiclub ask me for this thing. I never started to design until I broke mine. It´s the Karma ;-)" https://3dcarparts.org/library/2001/Audi/A4/armrest-lid-latch https://r2-upload.3dcarparts.workers.dev/file/parts/39d8a1d1-3d9a-4789-b523-8a166ddad1bb/images/armrest-lid-latch-1_1777857786851_3mswio.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Audi/A4/armrest-lid-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-422651f3-a348-43a5-b383-bbca0360c79e 2006 Honda Shadow Spirit 750 Oil Filter Wrench This wrench was designed to fit a genuine Honda oil filter for both 2006 and 2007 Honda Shadow Spirit 750, although it may fit some other years also. The filter measures about 64mm from flat side to flat side, and there are 14 sides to the filter. This wrench was designed for strength, durability, and ease of use. Designed for hand grip, but also has a 3/8in drive ratchet slot on end. https://3dcarparts.org/library/2006/Honda/Shadow%20Spirit%20750/oil-filter-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/422651f3-a348-43a5-b383-bbca0360c79e/images/oil-filter-wrench-1_1777857608954_t3vqli.jpg in_stock 25.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2006/Honda/Shadow%20Spirit%20750/oil-filter-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf9de57a-03cc-4278-8008-072ddff0302c 2003 Honda Element Visor Clip "Honda Element visor clip. .
Layer height at 0.25mm" https://3dcarparts.org/library/2003/Honda/Element/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/cf9de57a-03cc-4278-8008-072ddff0302c/images/visor-clip-1_1777857598688_3jj3x6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Honda/Element/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c3f69030-dadb-4831-91cb-23366dd155ba 2006 Honda Civic Key Fob Housing "This key has been tested on the following models and years:
2007 Civic
2009 Civic
2nd gen Honda Fit
2014 Odyssey
It will likely work on all 8th generation Civics which run from 2006-2011. If you have success for a year not listed, please let me know and I will add it to the tested list.
I found a housing here on Thingiverse, but it kept breaking. I decided to make a new one from scratch in the hopes that I could make something more resistant to daily and sometimes rough use. Its thicker and longer than the one noted below:
https://www.thingiverse.com/thing:954099
This is not a remix of the above. It's a from scratch make. Having said that, I do want to thank the original author for the inspiration.
This version has thicker walls and hopefully more ""sandwiching"" of pieces around the thin steel T part of the key. (Dumb design, btw, Honda.)
I have included some images for how I orient the parts in the slicer to make it more resilient. The top face is printed flat, but the back part is printed standing up to get the layers going in a different direction than the key turn torque force. Printing the back flat will increase the possibility of it splitting if you don't have good layer-to-layer adhesion.
I also found using ABS to be more brittle so I have used PETG for this print. Haven't tried PLA. I have also included a screen shot of Cura's settings for this print.
The bolts and nuts used to hold it together are three M2.5 x 20mm. (It looks like some fobs actually use some 2M screws that seem to work too.) You will have to cut the ends off the bolts to make them flush with the back. To help stiffen the unit, I have put nut traps in the bottom so that you don't have to use screws which may let go under torqueing forces over time.
I have hot glued the key into the housing for some added support.
Hope you have found this useful!
UPDATE DEC 15, 2021:
Added another STL by user request that doesn't have the red button. The new STL is called fob-front-no-red-button.stl. Apparently, it's for a Honda BRV. I haven't tested it myself, but hopefully the user reports back with success or fail.
I also added a three button version as requested. I don't know if it exists, but for completeness, I added a three button with no red button derivative too. They are called fob-front-three-buttons.stl and fob-front-three-buttons-no-red-button.stl respectively." https://3dcarparts.org/library/2006/Honda/Civic/key-fob-housing https://r2-upload.3dcarparts.workers.dev/file/parts/c3f69030-dadb-4831-91cb-23366dd155ba/images/key-fob-housing-1_1777857484168_nno130.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2006/Honda/Civic/key-fob-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6b1eb064-af0f-45c0-b118-15a1a6aef9d6 2002 Honda Civic Switch Panel for USB Connector Honda accessory switch plate is needed for 2002 Honda Civic and updated the sound system, so wanted to add 2 USB ports without drilling holes. This is a plug that will allow you to install a switch into the factory location. https://3dcarparts.org/library/2002/Honda/Civic/switch-panel-for-usb-connector https://r2-upload.3dcarparts.workers.dev/file/parts/6b1eb064-af0f-45c0-b118-15a1a6aef9d6/images/switch-panel-for-usb-connector-1_1777857480305_e5ttjh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Honda/Civic/switch-panel-for-usb-connector?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f33e2906-de6a-4524-bdd6-363f58e017a9 2007 Honda Fit Visor Clip I made this to replace the visor clip on my 2007 Honda Fit. It may fit with other model Hondas, but I specifically modeled it on what the Fit needed. The center post is solid (not hollow) - it attaches by being inserted and rotated 1/4 turn. https://3dcarparts.org/library/2007/Honda/Fit/visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f33e2906-de6a-4524-bdd6-363f58e017a9/images/visor-clip-1_1777857476179_itnlkk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Honda/Fit/visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4549b82e-1274-4948-8db7-58cdf86b6c9d 2006 Honda Pilot Plastic Trim Clip "This clip is from the plastic covers over the backs of the front seats in my 2006 Honda Pilot, but I'm sure it's used in a slew of other places.
Fit's in a hole about 8mm, so I guess that's that size." https://3dcarparts.org/library/2006/Honda/Pilot/plastic-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4549b82e-1274-4948-8db7-58cdf86b6c9d/images/plastic-trim-clip-1_1777857257874_wvkye8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Honda/Pilot/plastic-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1a19e5d6-bc0d-497f-a293-d26bf58b6b77 2010 Honda CR-V Threaded Oil Filler Funnel "I designed this funnel to make it easier to refill my 2010 Honda CR-V's oil when doing my own oil changes, without accidentally spilling oil. It threads on in place of the oil filler cap and should fit many other Honda and Acura vehicles.
This design is ~5 inches wide and ~3.5 inches tall, and is intended to be printed upside down as shown in the photos.
*Note:* If the location of the oil filler port on your Honda/Acura can only accommodate a smaller funnel, you should be able to adjust your slicer settings to easily print a smaller funnel - just shift the model's location on the Z-axis down (placing the larger portion below the build plate) so the result prints only the portion of the funnel you want.
*Printing tips*
* MOST IMPORTANT - Print *UPSIDE DOWN* as shown in the photo of the finished print. The original model is upright, so you will need to rotate the model in your slicer so the funnel portion sits on the build plate.
* I chose a layer height of 0.12mm (0.1mm should work too) to make sure the threads printed smoothly.
* Print with 3 walls if using a 0.4mm nozzle. The funnel portion is 2.4mm thick, so this creates a perfectly solid funnel with no infill (0.4mm * 3 for outer + 0.4mm * 3 for inner = 2.4mm).
* I *highly* suggest printing a *brim* on the outside and inside (I chose 10mm) to make sure the model adheres to the build plate.
* The example in the photos was printed in PETG, but this model should print just as well with PLA." https://3dcarparts.org/library/2010/Honda/CR-V/threaded-oil-filler-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/1a19e5d6-bc0d-497f-a293-d26bf58b6b77/images/threaded-oil-filler-funnel-1_1777857254267_edo6v0.jpg in_stock 17.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2010/Honda/CR-V/threaded-oil-filler-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9ccc084a-ca0f-4ec0-9ef1-aaa1e97dd59c 1998 Honda Civic Sun Visor Clip I designed and printed this to replace a broken sun visor clip in my 1998 Honda Civic. I decided to split it into two pieces to try and get the best print. I welded the two pieces using homemade ABS slurry. It works like a charm and is almost identical to the stock part. https://3dcarparts.org/library/1998/Honda/Civic/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9ccc084a-ca0f-4ec0-9ef1-aaa1e97dd59c/images/sun-visor-clip-1_1777857247387_9k3hti.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Honda/Civic/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12cf5742-f902-4f08-b425-9844a2e774af 2016 Honda CB500X Fork Protector "I did theses forks protectors to avoid damages on my motorcycle fork legs.
It fits my honda CB500X 2016 which has 41 mm fork diameter. I guess it fits others same generation CB500 models.
Use a zip tie in order to attach them" https://3dcarparts.org/library/2016/Honda/CB500X/fork-protector https://r2-upload.3dcarparts.workers.dev/file/parts/12cf5742-f902-4f08-b425-9844a2e774af/images/fork-protector-1_1777857242396_wqgjzc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Honda/CB500X/fork-protector?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2b6deaa0-7af5-417a-83d8-cc719dfbeb23 2003 Honda Accord Key Housing Replacement key housing for a 2003 Honda Accord (UK) https://3dcarparts.org/library/2003/Honda/Accord/key-housing https://r2-upload.3dcarparts.workers.dev/file/parts/2b6deaa0-7af5-417a-83d8-cc719dfbeb23/images/key-housing-1_1777857236494_0s01nz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2003/Honda/Accord/key-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5a59c6fb-c928-433d-b40c-24e60a986f2f 2005 Ford F-250 A-pillar grab handle caps "Ok, if you have a Ford truck you are prolly miss'n one or more of these silly caps. I run a 2005 F250 Superduty but these should fit F150 as well as other models around that time frame. I designed them so they actually pop in instead of gingerly sit on the lip surround and just waiting for that next pot-hole impact to fly out.
SketchUp file included along with the stl file for 2 caps." https://3dcarparts.org/library/2005/Ford/F-250/a-pillar-grab-handle-caps https://r2-upload.3dcarparts.workers.dev/file/parts/5a59c6fb-c928-433d-b40c-24e60a986f2f/images/a-pillar-grab-handle-caps-1_1777857090476_zjtf9u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/F-250/a-pillar-grab-handle-caps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-02472efe-f806-40c6-83ca-1f1f8f977fba 2004 Ford F-150 Console Tray 2004 Ford F150 Console Tray that should have always been there. https://3dcarparts.org/library/2004/Ford/F-150/console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/02472efe-f806-40c6-83ca-1f1f8f977fba/images/console-tray-1_1777857086515_bfbhfb.jpg in_stock 29.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/F-150/console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dd3ee2b9-b64c-43bb-97db-a4dcf3717a7e 2018 Ford Expedition Oil Fill Funnel "After the first oil change I did on my 2019 Expedition (3.5 V6 EcoBoost) I realized that the oil funnel I usually use wasn't very convenient because I had to hold it steady with one hand while pouring the oil with the other. Not a big deal with individual quarts, but a pain in the butt with a gallon jug... and why have a 3D printer if you can't solve life's minor inconveniences?
This should fit all 2018-present Ford Expeditions, and likely fits a whole lot of other Ford/Lincoln models that use the same type of oil cap. Especially if they use the 3.5 EcoBoost which is really common in the F-150, Expedition, and Navigator." https://3dcarparts.org/library/2018/Ford/Expedition/oil-fill-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/dd3ee2b9-b64c-43bb-97db-a4dcf3717a7e/images/oil-fill-funnel-1_1777856887808_6gmo6w.jpg in_stock 17.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2018/Ford/Expedition/oil-fill-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7274cc65-0d3f-44ab-9521-51d6ab5963b9 1997 Ford F-150 Headlight Switch Knob "This is a replacement headlight switch I modelled for a friend's 2002 F-150, and also fit another friend's F-350. Both have said it works well, however I'm sure some refinements could be made.
According to the parts database cross reference, it should fit the vehicles listed below:
FORD EXPEDITION (1997 - 2002)
FORD F-150 (1997 - 2003)
FORD F-150 HERITAGE 2004
FORD F-250 2004
FORD F-250 SUPER DUTY (2001 - 2004)
FORD F-350 2004
FORD F-350 SUPER DUTY (2001 - 2004)
FORD F-450 SUPER DUTY 2004
FORD F-550 SUPER DUTY 2004
FORD F53 (2006 - 2009)
LINCOLN BLACKWOOD 2002" https://3dcarparts.org/library/1997/Ford/F-150/headlight-switch-knob https://r2-upload.3dcarparts.workers.dev/file/parts/7274cc65-0d3f-44ab-9521-51d6ab5963b9/images/headlight-switch-knob-1_1777856879746_0rizc7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Ford/F-150/headlight-switch-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0577e270-0f6c-457a-832d-42c2f04d4c3b 1998 Ford Ranger Bed Anchor / Tie-Down Cleat This is a replacement bed anchor/cleat/tie-down for a '98 Ford Ranger. https://3dcarparts.org/library/1998/Ford/Ranger/bed-anchor-tie-down-cleat https://r2-upload.3dcarparts.workers.dev/file/parts/0577e270-0f6c-457a-832d-42c2f04d4c3b/images/bed-anchor-tie-down-cleat-1_1777856873511_gz6hi3.jpg in_stock 16.94 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Ford/Ranger/bed-anchor-tie-down-cleat?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-45afe418-66fd-4f7f-b03e-efb1f72aa88b 2007 Toyota Sequoia Hood Latch Clip "This is a stronger, reinforced, more durable Toyota Hood Latch Clip for my 2007 Toyota Sequoia.
I hope this will help someone out. Make sure you print this sideways with small supports so they're easy to peel off." https://3dcarparts.org/library/2007/Toyota/Sequoia/hood-latch-clip https://r2-upload.3dcarparts.workers.dev/file/parts/45afe418-66fd-4f7f-b03e-efb1f72aa88b/images/hood-latch-clip-1_1777856739688_wu1r2a.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Toyota/Sequoia/hood-latch-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-de27b51f-3b27-450b-87f5-96a9dc65dcf9 2016 Toyota Tacoma Coin Drawer A coin drawer to fit inside of a 3rd Generation Toyota Tacoma. Modeled in Onshape, before adding the handle from the Prusa Mk3 Drawer in Tinkercad. I reccomend printing in PETG to prevent warping in a hot car. https://3dcarparts.org/library/2016/Toyota/Tacoma/coin-drawer https://r2-upload.3dcarparts.workers.dev/file/parts/de27b51f-3b27-450b-87f5-96a9dc65dcf9/images/coin-drawer-1_1777856736012_vybreh.jpg in_stock 12.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Toyota/Tacoma/coin-drawer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-985bcef7-330a-41ad-be19-87bf8d8e8612 2005 Toyota Sequoia Windshield Wiper Bolt Cover "Fits 2005 Toyota Sequoia and probably other similar Toyota models and years. These get lost in the car wash etc. They just snap on/off. I measured and modeled the one good one I had left.
**Update** I posted some more pictures in the comments I took 5 years later. They still look like new!" https://3dcarparts.org/library/2005/Toyota/Sequoia/windshield-wiper-bolt-cover https://r2-upload.3dcarparts.workers.dev/file/parts/985bcef7-330a-41ad-be19-87bf8d8e8612/images/windshield-wiper-bolt-cover-1_1777856731975_17qnik.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Toyota/Sequoia/windshield-wiper-bolt-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ebd0336e-03ba-47a5-bbc1-6118c0b87ca7 1989 Toyota Pickup Heater Knobs "Replacement knobs for a Toyota pickup truck (mine is 1989).
Print in contrasting colors of your choice. Assemble insert and glue with thin superglue. Sand down excess and apply clear coat finish.
I printed with black and light blue PLA
These got loose over time and with heat, but a little glue (B-7000) did the trick to secure them" https://3dcarparts.org/library/1989/Toyota/Pickup/heater-knobs https://r2-upload.3dcarparts.workers.dev/file/parts/ebd0336e-03ba-47a5-bbc1-6118c0b87ca7/images/heater-knobs-1_1777856556603_j8aps3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Toyota/Pickup/heater-knobs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a6f9211c-32fc-45c4-b044-5835e1a58c04 1990 BMW 3 Series Center Vent Gauge Pod "8/8/2024: 2x52 failed after 2 years, so I redrew the whole part for better durability.
8/14/2024: 3x52 has also received durability updates.
8/15/2024: ventOnly, blank, 1x52, and 1x60 have all received durability updates. 2x60 is the only one that has not. If someone comes across this and needs a 2x60 I'll update it, but for now I'm done updating this.
Replacement center vent for BMW e36 in the following configurations:
- Blank plate
- Vent only
- 1 52mm gauge
- 2 52mm gauges
- 3 52mm gauges
- 1 60mm gauge
- 2 60mm gauges
I have only printed the 2 52mm gauge version. All of them should work, but I'm not positive on the 3 52mm gauge one. I used a ziptie on the shorter mounting tab to the screw hole on the top of the radio to pull the left end in a little, otherwise it sticks out a bit.
PLA will melt in the sun. I printed in PETG and finished it off with suede flocking and it's been fine.
There's a .3mf file in case edits need to be made. The model is pretty hacked together, but hey, it prints!
Thanks to https://www.thingiverse.com/vague_badger/designs for the original design that I based this off of.
If you're selling this on eBay and using my pictures without attribution, I don't like you." https://3dcarparts.org/library/1990/BMW/3%20Series/center-vent-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/a6f9211c-32fc-45c4-b044-5835e1a58c04/images/center-vent-gauge-pod-1_1777856335768_zp28ac.jpg in_stock 19.07 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/BMW/3%20Series/center-vent-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1ff1e896-8076-42ab-a989-ea77074f6632 2006 Toyota Prius Oil Filler Funnel This funnel allows for easier refilling of the engine oil of a 2006 Toyota Prius. It fits into the opening in the engine block snugly and wedges in between other parts of the engine to make sure it does not move around when you pour in the oil. https://3dcarparts.org/library/2006/Toyota/Prius/oil-filler-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/1ff1e896-8076-42ab-a989-ea77074f6632/images/oil-filler-funnel-1_1777856329534_efhl2u.jpg in_stock 21.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2006/Toyota/Prius/oil-filler-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-79a19685-c4f0-4638-9083-145509329bcb 1990 BMW 3 Series Radiator Bleeder Screwdriver "BMW radiator bleeder screwdriver, specific so as not to damage the delicate bleed screw.
Tested.
----------
Bmw radiator bleeder screwdriver, specific not to damage the delicate bleed screw.
Tested." https://3dcarparts.org/library/1990/BMW/3%20Series/radiator-bleeder-screwdriver https://r2-upload.3dcarparts.workers.dev/file/parts/79a19685-c4f0-4638-9083-145509329bcb/images/radiator-bleeder-screwdriver-1_1777856189607_70g5ck.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1990/BMW/3%20Series/radiator-bleeder-screwdriver?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3a6e06f5-23ff-4901-92d9-88f2a82883f6 1998 BMW 3 Series Cup Holder "A simple can Holder for the BMW E46.
I was inspired by the cup holder from mareks99 but faced some problems printing it. So I made a more simple and faster Version.
The hole is 60mm to fit the smaller cans. Perhaps I do one for bigger cans as well." https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder-3 https://r2-upload.3dcarparts.workers.dev/file/parts/3a6e06f5-23ff-4901-92d9-88f2a82883f6/images/cup-holder-3-1_1777856186051_s6f62h.jpg in_stock 11.22 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder-3?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-edaca040-c5a6-40a8-a81f-764d63f64839 1999 BMW 3 Series Air Scoop "Infill is 100% for the ears to be rigid.
For installation the original platenuts have to be removed.
In the scoop you can put 2 m6 nuts for mounting.
I've mounted it on my bmw 323CI e46.
ABS is also an option instead of Petg.
Because my printbed wasn't big enough I made
the scoop in 2 pieces. With the dowels (3x) you can put it
together. I didn't use any glue." https://3dcarparts.org/library/1999/BMW/3%20Series/air-scoop https://r2-upload.3dcarparts.workers.dev/file/parts/edaca040-c5a6-40a8-a81f-764d63f64839/images/air-scoop-1_1777856171051_bq9unz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/1999/BMW/3%20Series/air-scoop?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-db48031a-402a-45e7-85b5-add841215095 1998 BMW 3 Series Speaker Adapter "This is 6,5in (165mm) speaker adapter for BMW E46.
Provided two variants with ring around speaker or bare 4mm height. I use later and works fine.
I have put infill 20% and layer height 0,2mm." https://3dcarparts.org/library/1998/BMW/3%20Series/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/db48031a-402a-45e7-85b5-add841215095/images/speaker-adapter-1_1777856165245_8ak1en.jpg in_stock 11.61 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-44fff611-1183-4840-a933-d80b28338fa9 1988 BMW 5 Series Side Lower Panel Clip Clip for attaching the side lower panel of the BMW E34 interior. https://3dcarparts.org/library/1988/BMW/5%20Series/side-lower-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/44fff611-1183-4840-a933-d80b28338fa9/images/side-lower-panel-clip-1_1777856160402_fft3j3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1988/BMW/5%20Series/side-lower-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1cf37ee-a37f-4d75-b4bb-0dd94691c3a2 1982 BMW 3 Series Central Vent Gauge Panel BMW E30 central vent 3 gauge (52mm) panel. Clicks into the OEM tabs via the designed slots in this print. https://3dcarparts.org/library/1982/BMW/3%20Series/central-vent-gauge-panel https://r2-upload.3dcarparts.workers.dev/file/parts/b1cf37ee-a37f-4d75-b4bb-0dd94691c3a2/images/central-vent-gauge-panel-1_1777856155105_agxl6x.jpg in_stock 22.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/central-vent-gauge-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12b33538-62ce-4ba7-8e92-4194dccc810e 1982 BMW 3 Series Ash Tray I am trying to recreate the ash tray on a BMW E30. I measured and created a 3D CAD model of the ash tray. The measurements should be close, but I have not checked it yet. I also modeled the channels for the spring clips on the sides. https://3dcarparts.org/library/1982/BMW/3%20Series/ash-tray https://r2-upload.3dcarparts.workers.dev/file/parts/12b33538-62ce-4ba7-8e92-4194dccc810e/images/ash-tray-1_1777856150421_ya4848.jpg in_stock 31.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/ash-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c7fca632-16bc-4d06-b06c-c155a932ae83 1996 BMW Z3 Seat Wobble Fix Bushing "The BMW Z3 have some serious problems with wobbleing seats.
Check the internet for finding a manual how to take out the seat of the car and disassemble everything until you get to the defect part.
You can buy it at you local BMW dealer or you can print it on your own.
You'll need four of this parts for one seat." https://3dcarparts.org/library/1996/BMW/Z3/seat-wobble-fix-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/c7fca632-16bc-4d06-b06c-c155a932ae83/images/seat-wobble-fix-bushing-1_1777856146561_uwmvbh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/BMW/Z3/seat-wobble-fix-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-610069a6-c113-4c05-a57e-ac09682786aa 1998 BMW 3 Series Cup Holder "remix of Korino's e46 cup holder to fit my 316i.
I also made a reinforced one that should hold better against sun deforming the print I suggest this one if you're printing in PLA." https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/610069a6-c113-4c05-a57e-ac09682786aa/images/cup-holder-2-1_1777856141161_lqxd6w.jpg in_stock 20.44 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-91690826-05f3-43d3-8662-9404c5577e62 1996 BMW 5 Series License Plate Bracket Fastener Clip "My E39 Touring was missing one of the clips to hold in the plate bracket (plinth). The previous owner had used silicone to hold the panel on.
Unable to live with this I contacted the dealership - who were unable to find the part in their system. Doubting their competence I checked realoem myself and actually couldn't find a part number.
So I turned to Fusion360 and whipped these up.
I've never designed anything before so please bear with me.
I have made two revisions of this thing.
**(bmw_plate_plinthe_v3)**
The first is a copy of the original - fits snug and locks nicely. - It may be a good idea to use a bit of RTV or Butyl Rubber around the hole to keep water out!
**(Nut.stl /Thread.stl)**
The second is a threaded option. Allowing you to fit an M8x1.25 nut on the back.
This option was created for people who may have corrosion around the hole thus making it too big for the snap in option.
Printed these on my CR-10S w/ 99% concentric infill 5 walls and 0.12 layer height @ 35mm/s
Hopefully they can be of use to someone else too.
Cheers.
Apparently fits these models too!
BMW E30 318i M10 1.8L
BMW E30 318i M42 1.8L
BMW E30 318is M42 1.8L
BMW E30 325i M20 2.5L
BMW E30 325is M20 2.5L
BMW E31 840Ci M60 4.0L
BMW E31 840Ci M62 4.4L
BMW E31 850Ci M70 5.0L
BMW E31 850Ci M73 5.4L
BMW E31 850Ci All
BMW E31 850CSi S70 5.6L
BMW E31 850i All
BMW E34 M5 S38 3.5L
BMW E38 740i M60 4.0L
BMW E38 740i M62 4.4L
BMW E38 740iL M60 4.0L
BMW E38 740iL M62 4.4L
BMW E38 750iL M73 5.4L
BMW E39 525i M54 2.5L
BMW E39 528i M52 2.8L
BMW E39 530i M54 3.0L
BMW E39 540i M62 4.4L" https://3dcarparts.org/library/1996/BMW/5%20Series/license-plate-bracket-fastener-clip https://r2-upload.3dcarparts.workers.dev/file/parts/91690826-05f3-43d3-8662-9404c5577e62/images/license-plate-bracket-fastener-clip-1_1777856131127_p0bmjx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1996/BMW/5%20Series/license-plate-bracket-fastener-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b73ef9b4-5b29-4385-acb2-7dcb96b87baf 1990 BMW 3 Series Fog Light Blank Plate "Blank Plate for BMW E36.
I design this to mount with self tapping screw or drill hole and use zip ties." https://3dcarparts.org/library/1990/BMW/3%20Series/fog-light-blank-plate https://r2-upload.3dcarparts.workers.dev/file/parts/b73ef9b4-5b29-4385-acb2-7dcb96b87baf/images/fog-light-blank-plate-1_1777856127034_5d332s.jpg in_stock 22.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/BMW/3%20Series/fog-light-blank-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-62a3150f-996b-4b61-9ce5-5791dca199fa 1993 BMW R1100 GS Turn Signal Indicator Switch Knob Replacement indicator knob designed for BMW R1100 GS (model +/-1993) https://3dcarparts.org/library/1993/BMW/R1100%20GS/turn-signal-indicator-switch-knob https://r2-upload.3dcarparts.workers.dev/file/parts/62a3150f-996b-4b61-9ce5-5791dca199fa/images/turn-signal-indicator-switch-knob-1_1777856122368_iq7iob.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1993/BMW/R1100%20GS/turn-signal-indicator-switch-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-34ecf9ef-6c5a-4a9e-90b1-d242ee148c04 1990 Nissan 300ZX Door Panel Grommet This is a replacement Grommet for the door panel screws in the 1990 - 1996 Nissan 300zx and possibly other models or vehicles. There are 4 screws that use these grommets when reinstalling the door panels. I lost them so I measured and created a printable model. https://3dcarparts.org/library/1990/Nissan/300ZX/door-panel-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/34ecf9ef-6c5a-4a9e-90b1-d242ee148c04/images/door-panel-grommet-1_1777855667241_tf2hwq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/door-panel-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1dc0a784-ec55-4337-a84c-f690f8147803 1984 Nissan 300ZX T-Top Release Clip "Nissan 300zx Z31 T-Top release clip. I modeled this after mine broke.
Printing: Use ABS for heat resistance." https://3dcarparts.org/library/1984/Nissan/300ZX/t-top-release-clip https://r2-upload.3dcarparts.workers.dev/file/parts/1dc0a784-ec55-4337-a84c-f690f8147803/images/t-top-release-clip-1_1777855663504_axx9q4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1984/Nissan/300ZX/t-top-release-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2f649386-311d-4067-b77d-fc51dca5017a 1990 Nissan 300ZX Trunk Cargo Cover Hook Clip This is a 1990-1996 300zx Cargo Cover hook clip I made after both of mine broke. Not sure if they're the same for all 300zx, but mine is a 1996 2+0 NA T-Top. OEM Part is #: 79912-30P10 and this is an alternative to this $15 clip on Z1 https://www.z1motorsports.com/cargo-cover/nissan/oem-300zx-z32-cargo-cover-hook-p-771.html?gclid=CjwKCAjwnZaVBhA6EiwAVVyv9CLqkAJ3XD-m6WG78ro5Qb7KAO-gz8o7Rtn2v7xR65vUFzX3qXJQoBoC51UQAvD_BwE https://3dcarparts.org/library/1990/Nissan/300ZX/trunk-cargo-cover-hook-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2f649386-311d-4067-b77d-fc51dca5017a/images/trunk-cargo-cover-hook-clip-1_1777855659692_pxytvl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/trunk-cargo-cover-hook-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bea87e8a-d99f-4be6-aa0d-a4818730a39e 1990 Nissan 300ZX T-Top Handle "**Fair Warning** I have not printed the passengers side handle. I just did a mirror image of the drivers side.
*Background*:
Have a 95 300ZX with a broken drivers side T-top handle. The internet has limited replacement parts and no new production handles.
*Printing Considerations*:
The main center hole and the square hole for the latch will require supports in your slicer app. The other holes, including the rectangle were able to be printed just fine without supports. My 3D guru went with 50% infill @ .2mm resolution.
*Known Issues*:
The tolerances for the holes were a little much so the handle moves around a bit more than OEM." https://3dcarparts.org/library/1990/Nissan/300ZX/t-top-handle-2 https://r2-upload.3dcarparts.workers.dev/file/parts/bea87e8a-d99f-4be6-aa0d-a4818730a39e/images/t-top-handle-2-1_1777855656033_zz98fc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Nissan/300ZX/t-top-handle-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e15a2048-b30e-4446-90e5-096a98456a1d 1984 Nissan 300ZX Cup Holder "Another cup holder option to rival the others out there.
Personally I like it tucked away in the center console. Been using this design in all my Z's for some time now. Figured I should share.
Leaves enough space to still put junk in the console, big enough to hold decent sized cups.
It is a snug fit. Not permanently held in. Easy to pop out.
My PETG prints have held up for 2-3 years in the summer.
PLA prints will not survive any heat in a car.
The space in front or behind still can fit a few cassettes, or see below for a divider
A divider has been made by pthomas2000 to fit perfectly behind to lock this in place
[https://www.thingiverse.com/thing:5761587](https://www.thingiverse.com/thing:5761587)" https://3dcarparts.org/library/1984/Nissan/300ZX/cup-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/e15a2048-b30e-4446-90e5-096a98456a1d/images/cup-holder-2-1_1777855652073_psx1jc.jpg in_stock 22.73 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/cup-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d3cbb870-3067-4bc5-adad-ca2bedd72859 1989 Nissan 300ZX Cup Holder with USB Slots Cupholder for nissan 300zx. I printed my base in glow in the dark. it has two slots for usbs. https://3dcarparts.org/library/1989/Nissan/300ZX/cup-holder-with-usb-slots https://r2-upload.3dcarparts.workers.dev/file/parts/d3cbb870-3067-4bc5-adad-ca2bedd72859/images/cup-holder-with-usb-slots-1_1777855646233_opbar6.jpg in_stock 17.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Nissan/300ZX/cup-holder-with-usb-slots?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e7d3a1a-ac15-430c-9c22-223c1b8fb3e6 1996 Nissan 300ZX Windshield Wiper Gear Had a broken gear in the wiper gear box for a 1996 Nissan 300ZX not allowing the windshield wipers to operate consistently. Used the Gear Generator For Customizer V2.0, then modified it to match the broken one. Fit is a bit tight, but works well. https://3dcarparts.org/library/1996/Nissan/300ZX/windshield-wiper-gear https://r2-upload.3dcarparts.workers.dev/file/parts/1e7d3a1a-ac15-430c-9c22-223c1b8fb3e6/images/windshield-wiper-gear-1_1777855634091_gfaz5g.jpg in_stock 11.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1996/Nissan/300ZX/windshield-wiper-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f32e6259-e0f1-4854-8454-6b719b897ad8 "2007 Mini Cooper Front Door Speaker Adapter 5.25""" "These are speaker adapters for R56 Mini Coopers to mount aftermarket component speakers in the factory front door without modifying your factory speakers. One adapter for the woofer and one for the tweeter.
These were modeled around CT Sounds Meso 5.25"" Components but can be easily adjusted to fit the actual size of your speakers. The mounting depth of the speaker is 2.6"" and clears the window.
Speaker adapter cut out diameter is 119mm.
Tweeter plate cut out diameter is 52.50mm.
You will need to drill holes to mount the speaker to the adapter.
40% infill recommended for strength." https://3dcarparts.org/library/2007/Mini/Cooper/front-door-speaker-adapter-525 https://r2-upload.3dcarparts.workers.dev/file/parts/f32e6259-e0f1-4854-8454-6b719b897ad8/images/front-door-speaker-adapter-525-1_1777855506986_d5h8qf.jpg in_stock 21.48 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/front-door-speaker-adapter-525?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9a06e1c1-2151-4040-8f85-d1e13b27ee13 2021 Mini Cooper S Front License Plate Hanger Not a fan of front license plates or drilling holes in new cars. Unfortunately my state requires it. Made this to avoid tickets and mount the license plate to the front bumper without altering the car. Fits 2021 Mini Cooper S 2dr Hatchback (F56), perhaps other models from before this year, but I believe the 2022 is too different. Fit is tight, but this was made for parking lots, not while the car is in motion (although it may work for that). Attach parts between mount and license plate, then slide in right above the front bumper and it should clip into place. To remove lift straight up and out. https://3dcarparts.org/library/2021/Mini/Cooper%20S/front-license-plate-hanger https://r2-upload.3dcarparts.workers.dev/file/parts/9a06e1c1-2151-4040-8f85-d1e13b27ee13/images/front-license-plate-hanger-1_1777855496552_lpilei.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2021/Mini/Cooper%20S/front-license-plate-hanger?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a4dd3a1f-371d-4e18-8bb4-10ee230329b3 1966 Ford Mustang Courtesy Door Light Switch Repair "A new door switch is $49 in Denmark, or 3 weeks waiting time to get one shipped from the US, its way faster just creating a repair...
If you have a broken door switch, here is a solution.
The part is designed to make use of the internals of your old plastic door switch.
Supports is only needed for the screw in piece.
Disassemble it, that the metal internals (spring, contacts etc.) and insert it in this design." https://3dcarparts.org/library/1966/Ford/Mustang/courtesy-door-light-switch-repair https://r2-upload.3dcarparts.workers.dev/file/parts/a4dd3a1f-371d-4e18-8bb4-10ee230329b3/images/courtesy-door-light-switch-repair-1_1777855488902_szsstk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1966/Ford/Mustang/courtesy-door-light-switch-repair?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e343fc6-2666-47cf-b0f1-7d9e28af8c54 1965 Ford Mustang Door Latch Bushing This is a replacement door latch bushing for a 1965-67? Ford mustang, Left and Right should be the same. the push/pull rod nests into the interior and clips in into the little latch groove. I found luck printing in PLA on edge to combat layer line weakness in the thinnest part of the shaft , Printed solid, with supports and it needed a little cleanup after. I printed it on a Bambu labs X1C, this is the 4th iteration, but the only one that fit properly. https://3dcarparts.org/library/1965/Ford/Mustang/door-latch-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/1e343fc6-2666-47cf-b0f1-7d9e28af8c54/images/door-latch-bushing-1_1777855483982_ptvx6v.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1965/Ford/Mustang/door-latch-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c411e2e5-be45-4c8a-9a7c-583dc38b3b5b 2018 Ford Mustang Shifter Knob "I decided I wanted a custom shifter for my Mustang so I made this one in Fusion 360. After several attempts and designs I finalized on this one. I like the way it feels better than the stock shifter.
NOTE: I had a difficult time in finding what the proper thread pitch was on this shifter. Every site I went to including Mustang sites all say the threads are 12mm x 1.75 thread pitch. However from what I can deduce this is ONLY for the higher end models like the GT. I had to buy a thread pitch gauge to properly identify that the 4 Cyl Eco boost with Turbo is indeed a 12mm x 1.25 thread pitch. If you want to use this in a GT you might have to use a different sized lugnut or other solution. I have not tested this on any other model but mine. And quite frankly the 4 CYL turbo has 330 horses so MORE than enough for me." https://3dcarparts.org/library/2018/Ford/Mustang/shifter-knob https://r2-upload.3dcarparts.workers.dev/file/parts/c411e2e5-be45-4c8a-9a7c-583dc38b3b5b/images/shifter-knob-1_1777855471853_7hxpoa.jpg in_stock 21.72 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Ford/Mustang/shifter-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b69e61e3-f58c-4b4a-94f3-e15768dd0c27 2013 Ford Mustang Shifter Sleeve "Latest update.
The file is now modified with the correct thread for the shift stick, I would advise cleaning the thread with 12mm 1.25 tap to make installation easier. I also increased the size of the lower ring so it grips the plether gaiter better
The old files are now deleted.
This is a cover for the stick shift on a 2013 mustang when fitting the fake Aliexpress FMR gear shifter knob. The lower doughnut clicks into the factory gaiter and should fit in a 66mm diameter shifter knob. The image shows it painted in silver when aerosol, due to the supports needed I think painting is best to cover any residue marks unless you wanna try buffing silk finish silver filament.
If you print right side up with tree supports touching the build plate, it will come out with virtually no cleanup" https://3dcarparts.org/library/2013/Ford/Mustang/shifter-sleeve https://r2-upload.3dcarparts.workers.dev/file/parts/b69e61e3-f58c-4b4a-94f3-e15768dd0c27/images/shifter-sleeve-1_1777855464202_qsf5l7.jpg in_stock 15.07 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Ford/Mustang/shifter-sleeve?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a1799fc5-be18-4942-a930-abc4c60aed31 1979 Ford Mustang Steering Column Hub Cover "A steering column hub cover to fill in gap between a NRG Race Hub quick release and the steering column trim on a 1979-1989 Fox Body Mustang. It's a basic model and will need a bit of high build primer and paint to look OEM.
It fits both Tilt and Non-tilt steering column trim. It has an slight oval to the inner ring to accommodate for the larger lip on the top of the steering column trim I placed a star at the top position so its easier to orientate. Mine popped into place without anything need to hold it in place but would suggest some double side tape to keep it from accidentally falling off.
I printed it out in Elegoo ASA Black filament. On a Elegoo Centauri Carbon with 0.2 layer height with a 0.4 mm Brass-Hardened Steel tip" https://3dcarparts.org/library/1979/Ford/Mustang/steering-column-hub-cover https://r2-upload.3dcarparts.workers.dev/file/parts/a1799fc5-be18-4942-a930-abc4c60aed31/images/steering-column-hub-cover-1_1777855459055_g00aal.jpg in_stock 21.14 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Ford/Mustang/steering-column-hub-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4bdbc283-803a-47c7-a46d-722d2730d2b3 1994 Ford Mustang Door Switch Bracket "This is the bracket or bezel which holds the push button switch in the front door jam of SN95 model Ford Mustangs (I would not be surprised if other Ford cars of the same era used the same part). I built this to replace a broken one on my 1995 Mustang.
There are two files. One is as close as a replica to the original part as I could draw. Printing in PLA however, the clips would break off too easily and not hold the piece in place properly. If you would like to print it in some other material, let me know how it works out.
The second is slightly redesigned, and I intended for it to be a twist lock, however when I tested, it popped into place and held the button good enough to do it's job to my satisfaction.
The internal thread is 1/2-in by 20tpi. I ran a tap through it to clean things up a bit before installing the switch." https://3dcarparts.org/library/1994/Ford/Mustang/door-switch-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/4bdbc283-803a-47c7-a46d-722d2730d2b3/images/door-switch-bracket-1_1777855453372_b4yp5e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1994/Ford/Mustang/door-switch-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-99c43c4f-cb56-498a-8798-ba47602be856 1994 Ford Mustang Cup Holder "The 1994 and 1995 Mustangs have a center console with an ashtray instead of cupholders. A commercially-available cupholder is sold that snaps into the ashtray, but it is around $70.
So, I modeled up one. This allows you to have an extra pair of cupholders while keeping your car stock. To use, remove the metal ashtray insert and snap this in in place.
You can print this upright or upside down. Either way will require supports. I printed this one with the cupholders facing down which results in a rough surface in the bottom of the cupholders from the supports. If I printed it again I would print it upright so the supports are on the bottom where they would be invisible when the cupholder is installed.
I printed this out of PLA. We'll see how it holds up to summer heat." https://3dcarparts.org/library/1994/Ford/Mustang/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/99c43c4f-cb56-498a-8798-ba47602be856/images/cup-holder-1_1777855428340_1t5lwy.jpg in_stock 49.54 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Ford/Mustang/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-819f009f-faa4-46e5-824a-128d1f24e4df 2010 Ford Mustang Headlight Gasket This replaces a headlight gasket for a 2010 Ford Mustang GT. I lost a headlight gasket when changing out headlight bulbs and couldn't find ANY replacement part locally or online. I went to Autozone to find a replacement gasket and they had NO idea so I made one for myself. This will get you through until you find an original rubber gasket part. I am sure if you wrap the gasket with electrical tape it will keep it waterproof. Anyway, this works and should keep your headlight tight in the housing. https://3dcarparts.org/library/2010/Ford/Mustang/headlight-gasket https://r2-upload.3dcarparts.workers.dev/file/parts/819f009f-faa4-46e5-824a-128d1f24e4df/images/headlight-gasket-1_1777855422393_5zr25k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2010/Ford/Mustang/headlight-gasket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e775d2d4-b9dc-43ba-938c-5f4bb6e8c2e9 1990 Nissan 300ZX Ignition Key Cover "This is the ignition cover which normally goes missing. It isn't a perfect replica of the OEM part however I would rather this than the ugly gap that appears without it.
I printed in ABS with 0.2mm nozzle and 0.12mm layer height to get it nice and neat." https://3dcarparts.org/library/1990/Nissan/300ZX/ignition-key-cover https://r2-upload.3dcarparts.workers.dev/file/parts/e775d2d4-b9dc-43ba-938c-5f4bb6e8c2e9/images/ignition-key-cover-1_1777855253833_sy6usr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/ignition-key-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-327cea83-0855-4353-88c5-4948b362553b 1984 Nissan 300ZX Cup Holder Insert Cupholder insert for the center console of a Z31 300ZX. https://3dcarparts.org/library/1984/Nissan/300ZX/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/327cea83-0855-4353-88c5-4948b362553b/images/cup-holder-insert-1_1777855248753_1d8czl.jpg in_stock 20.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-09487c8e-e5fe-448a-b506-7ee1f7b8c00d 1984 Nissan 300ZX Cup Holder "Fits snugly in center console of the Z31. Glue all the pieces together and screw the two halves together with 8mm M3 countersunk screws.
I split it up to be able to print on an Ender 3." https://3dcarparts.org/library/1984/Nissan/300ZX/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/09487c8e-e5fe-448a-b506-7ee1f7b8c00d/images/cup-holder-1_1777855240235_zxxxw6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d628bb2-81f6-4c2d-a7c5-f4c7ebb4040f 1984 Nissan 300ZX Glovebox Latch Cover "New cover snaps over latch mechanism. It's a pretty tight fit so I recommend PETG, PLA could snap.
For Z31 Nissan" https://3dcarparts.org/library/1984/Nissan/300ZX/glovebox-latch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/4d628bb2-81f6-4c2d-a7c5-f4c7ebb4040f/images/glovebox-latch-cover-1_1777855235884_9ouq88.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/glovebox-latch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8051c496-e8b7-45ab-999a-3310a9d94484 1984 Nissan 300ZX Spare Tire Panel Thumbscrew Replacement thumbscrew for the 1984-1986 Nissan 300zx spare tire/right rear taillight panel cover. This is a double helix thread like the original panel screw! A single thread design WILL NOT work with the OEM receiver clip. https://3dcarparts.org/library/1984/Nissan/300ZX/spare-tire-panel-thumbscrew https://r2-upload.3dcarparts.workers.dev/file/parts/8051c496-e8b7-45ab-999a-3310a9d94484/images/spare-tire-panel-thumbscrew-1_1777855231691_s4sl6x.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/spare-tire-panel-thumbscrew?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9dc53c26-67bb-4d39-b6f3-9e1ec9c3c076 1984 Nissan 300ZX Trim Panel Lock Pin 1984 - 1986 Nissan 300zx replacement interior panel pin for left rear taillight. https://3dcarparts.org/library/1984/Nissan/300ZX/trim-panel-lock-pin https://r2-upload.3dcarparts.workers.dev/file/parts/9dc53c26-67bb-4d39-b6f3-9e1ec9c3c076/images/trim-panel-lock-pin-1_1777855227992_jtc4v7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/trim-panel-lock-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-62f7d88e-ecca-44c7-9b49-b08a2f8a4459 2006 Mini Cooper S PCV Cover Bolt Plugs "Mini Cooper S & JCW R56 - N14 engine PCV Cover bolt plugs.
You know why you need them already :)
There are 2 bolts in the middle of the head cover of N14 engine.
No plugs or caps are available to cover the holes and it just looks empty there, like something is missing.
I had to make 2 different caps. The one on the left is 22mm, the one on the right is 21.7mm.
Give it a try first with 21.7 to see whether it fits ok both sides without any gap and if needed proceed with the 22mm.
Standard printing settings. I used PLA and have been monitoring them for a week now. Everything seems fine, they are not melting or changing form.
If there is a need, you can always print them in ABS or PETG with the respective settings of your printer." https://3dcarparts.org/library/2006/Mini/Cooper%20S/pcv-cover-bolt-plugs https://r2-upload.3dcarparts.workers.dev/file/parts/62f7d88e-ecca-44c7-9b49-b08a2f8a4459/images/pcv-cover-bolt-plugs-1_1777855023925_miyrbk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2006/Mini/Cooper%20S/pcv-cover-bolt-plugs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8618dda7-51a1-4d4e-b1e0-ac1e59004416 2007 Mini Cooper S Gauge Pod "Use whatever the latest version is. I keep printing and then adjusting the spacing little by little. I also have a single cup pod (look under my profile) that works a little better because it swivels. If you are link me and stripped the screw hole in the back of the tach then the three screw frame design here might work out better for you.
Used the hole layout and frame from the original and remixed for a standard 52mm gauge. Have not printed or test fit. WIP
Print in PETG or ABS and not PLA obviously." https://3dcarparts.org/library/2007/Mini/Cooper%20S/gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/8618dda7-51a1-4d4e-b1e0-ac1e59004416/images/gauge-pod-1_1777855010685_oljztc.jpg in_stock 14.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper%20S/gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9a6b0839-4096-4e0e-9fa3-f00212e459d4 2002 Mini Cooper Front Speaker Adapter 165mm "I adjusted this mount to be 7mm thicker. I used it with Hertz K165 6.5"" speakers." https://3dcarparts.org/library/2002/Mini/Cooper/front-speaker-adapter-165mm https://r2-upload.3dcarparts.workers.dev/file/parts/9a6b0839-4096-4e0e-9fa3-f00212e459d4/images/front-speaker-adapter-165mm-1_1777855003920_kzx0yt.jpg in_stock 20.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Mini/Cooper/front-speaker-adapter-165mm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0fa223fb-1e7d-42f5-8974-a356a5ce50e1 2005 Mini Cooper Sunroof Rail Guides "These 3d printed parts are the replacement guides for the 2 clips on each side on the sunroof rail that usually break.
OEM Assembly - costs 1200€~
They are not identically visually but they do the job and are tight fitted.
I will send you a manual on how to install them if you need them without removing the fabric.
Package comes with 4 clips (2 for each side)
I can send this to any country via postal.
I also offer free replacements if they ever break, been selling them for awhile.
Contact me at convertibleclips @ freelo.org if you need them. (spaced out because of bots)
Material is ABS 80%" https://3dcarparts.org/library/2005/Mini/Cooper/sunroof-rail-guides https://r2-upload.3dcarparts.workers.dev/file/parts/0fa223fb-1e7d-42f5-8974-a356a5ce50e1/images/sunroof-rail-guides-1_1777854992530_96ngpa.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mini/Cooper/sunroof-rail-guides?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bcf0d588-3ddc-47e2-ada6-54bb022a0748 2013 Mini Cooper S Parcel Shelf Peg The peg supporting the parcel shelf in a friend's 2013 Mini Cooper S broke, and, sadly, the peg part here on thingiverse was only for earlier models. We were able to superglue the original part back together, but I created this model based on the old part for a spare. https://3dcarparts.org/library/2013/Mini/Cooper%20S/parcel-shelf-peg https://r2-upload.3dcarparts.workers.dev/file/parts/bcf0d588-3ddc-47e2-ada6-54bb022a0748/images/parcel-shelf-peg-1_1777854979885_9uxjqe.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Mini/Cooper%20S/parcel-shelf-peg?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-89a7f81f-7bd3-45ff-bc97-5672bd59757f 2007 Mini Cooper Parcel Shelf Rod Push-fit rod replacement for the parcel shelf of Mini Cooper model R56 2007-2010 https://3dcarparts.org/library/2007/Mini/Cooper/parcel-shelf-rod https://r2-upload.3dcarparts.workers.dev/file/parts/89a7f81f-7bd3-45ff-bc97-5672bd59757f/images/parcel-shelf-rod-1_1777854971495_nined0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/parcel-shelf-rod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1856a08e-fee9-4b69-a993-cdcb14158895 2004 Ford F-Series / Multi-Platform Double DIN radio bezel "Tight radius bezel made for a superduty with a dash swap from a 2006. Hole will be the same as the models below. Excuse the install photos, they are with the prototypes. Bezel 2 allows the head unit to open, if equipped with the function.
LINCOLN
MKX W/ NAV 2007-2010
Mark LT 2006-08
Navigator W/NAV 2007-2014
MERCURY
Milan 2006-2009
Montego 2005-2007
Monterey 2004-2007
Mountaineer 2006-2010
Sable 2008-2009
FORD
E Series Econoline Full Size Van 2009-up
Edge 2007-2010
Expedition 2007-2014
Expedition (Fleet) 2015
Explorer 2006-2010
Explorer Sport Trac 2006-2010
F-150 2004-2008
F-250/350/450/550 (without 8-inch screen) 2013-2016
F-250/350/450/550 2005-2012
F-650/750 2011-up
Five Hundred 2005-2007
Focus 2005-2007
Freestar 2004-2007
Freestyle 2005-2007
Fusion 2006-2009
Mustang 2005-2009
Taurus / Taurus X 2008-2009
Transit Connect (late generation) 2012
Transit Connect 2013" https://3dcarparts.org/library/2004/Ford/F-Series%20%2F%20Multi-Platform/double-din-radio-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/1856a08e-fee9-4b69-a993-cdcb14158895/images/double-din-radio-bezel-1_1777854966814_zak836.jpg in_stock 12.69 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/F-Series%20%2F%20Multi-Platform/double-din-radio-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-967c28ca-a8d1-40c3-9910-aa9035178575 1965 Ford Mustang AM Radio Tuner Connector "Internal connector for a 1965 Ford AM radio tuner.
A friend needed one to repair the factory radio in his Mustang, I recreated the factory one to near exact dimensions.
I am working on the FM variant right now and it will be uploaded soon.
Goes between the radio gear set and the internal side of the knob.
Print with rafts and supports, ball end down. I tried it every which way and this worked the best.
If you need a different version or any adjustments made feel free to contact me.
." https://3dcarparts.org/library/1965/Ford/Mustang/am-radio-tuner-connector https://r2-upload.3dcarparts.workers.dev/file/parts/967c28ca-a8d1-40c3-9910-aa9035178575/images/am-radio-tuner-connector-1_1777854962633_tsaydd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1965/Ford/Mustang/am-radio-tuner-connector?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c28c6c28-355e-4326-9c38-b8384e58752c 2016 Ford Mustang Hood Vent "this hood vent is for a Trufiber hood on a 2016 mustang to be set in the middle of hood.
Updated 6/8/2019
added pics of the parts for the hood" https://3dcarparts.org/library/2016/Ford/Mustang/hood-vent https://r2-upload.3dcarparts.workers.dev/file/parts/c28c6c28-355e-4326-9c38-b8384e58752c/images/hood-vent-1_1777854956243_17bb7z.jpg in_stock 26.74 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Ford/Mustang/hood-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-99faddc4-2d04-4749-a39c-466bd709522d 1958 Edsel Edsel Rocker Trim Clip "These rocker trim clips are based on the plastic clips used for a 1995 or above Ford Mustang but modified to fit the 1958 Edsel.
The Edsel originally included metal clips that would mount to the car first, then the trim would rest onto the clip and pressed firmly at the bottom to snap it into place. This method had very tight tolerances and could easily fall off, or be stolen.
This new clip design is very easy to install because you can use the existing mounting holes, or drill new ones with a 3/8"" drill bit. The clips slide onto the rocker trim first and then you can hold the trim in position and adjust the clips to match the holes. Once aligned, you can start from the back and press the trim firmly in place. They provide a solid hold that will prevent theft.
If removal is necessary then the plastic can be flexed with enough force and will give. Needle nose pliers can be used to remove the clip from the car (may destroy the clip).
Tools needed:
- 3/8"" or 10mm drill bit for the mounting holes
- Drill (if holes are not already present)
Drill any holes needed about 31mm above the lowest part of the car. If holes are already present then reuse those.
Drill at least 6 holes evenly placed, but stop behind the door gap. No clips are needed under the quarter panel. The original Edsel included a butterfly clip under the quarter panel, but it's not needed for this.
Inspiration:
Mustang clips - https://www.clipsandfasteners.com/Ford-Rocker-Panel-and-Ground-Effects-Moulding-Clip-p/a20965.htm
Original Edsel clips - https://cgfordparts.com/ufolder/fordpart.php?number=2763" https://3dcarparts.org/library/1958/Edsel/Edsel/rocker-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/99faddc4-2d04-4749-a39c-466bd709522d/images/rocker-trim-clip-1_1777854952670_d5z2uc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1958/Edsel/Edsel/rocker-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b4ca7989-cf2e-4e0a-99ad-f67abd677b02 1971 Ford Mustang Console Clock USB Filler Panel "This is a replacement for the often dead console clock on 1971-73 mustangs, It uses the 12 volt UBS panel from Amazon linked below to supply additional power points that don't use up your Cigarette lighter. I recommend printing in ABS or PETG with ironing enabled for the best possible surface finish. ABS sands well with 400-600 grit for a nice paintable finish.
https://a.co/d/0zPJWFp?sfnsn=mo" https://3dcarparts.org/library/1971/Ford/Mustang/console-clock-usb-filler-panel https://r2-upload.3dcarparts.workers.dev/file/parts/b4ca7989-cf2e-4e0a-99ad-f67abd677b02/images/console-clock-usb-filler-panel-1_1777854948621_3piyw6.jpg in_stock 21.02 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1971/Ford/Mustang/console-clock-usb-filler-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e240016e-2fe9-43e7-a239-37d1794b7a73 2025 Ford Mustang Mach-E Center Console Storage Bin Organizer Insert "This is a center console insert for the 2025 Ford Mach-E. The insert is a very basic design that meets my needs.
The 2025 Ford Mustang Mach-E has a 12V power outlet located on the left-hand side inside the main center console storage bin (under the armrest).
This is a change from previous model years (2021-2024), where the 12V socket was typically located on the right side.
The 2025 model also includes two additional USB ports beside the 12V outlet." https://3dcarparts.org/library/2025/Ford/Mustang%20Mach-E/center-console-storage-bin-organizer-insert https://r2-upload.3dcarparts.workers.dev/file/parts/e240016e-2fe9-43e7-a239-37d1794b7a73/images/center-console-storage-bin-organizer-insert-1_1777854944629_2k0vtb.jpg in_stock 30.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2025/Ford/Mustang%20Mach-E/center-console-storage-bin-organizer-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-da71a35c-4bd6-44ae-bdc1-b8266f65d104 "1987 Ford Mustang Holley Terminator X 3.5"" Screen Mount" "Here's a mount to attach your Terminator X 3.5"" touchscreen to the dash of a '87-'93 Ford Mustang. It uses double-sided tape (3M VHB recommended) to stick the display to the upper portion of the dash. Mount has a 10° vertical angle to accommodate the forward tilt of the dash and a 15° horizontal angle so that the display is angled facing the driver. Screen can be easily removed to access the SD slot. Suggest using adhesive felt pads behind the display to cushion it, much like the mount included in the Holley kit. Print in PETG or ABS / ASA to handle the car interior heat." https://3dcarparts.org/library/1987/Ford/Mustang/holley-terminator-x-35-screen-mount https://r2-upload.3dcarparts.workers.dev/file/parts/da71a35c-4bd6-44ae-bdc1-b8266f65d104/images/holley-terminator-x-35-screen-mount-1_1777854937592_jxn5oc.jpg in_stock 15.22 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Ford/Mustang/holley-terminator-x-35-screen-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e44cec6c-762f-4615-809e-d5d4db15ebd9 1965 Ford Mustang Tachometer Mount "I designed this to replace ugly hose clamp type of mount that holds the external tachograph to the mustang steering column. This should fit perfectly 1965 and 1966 Ford Mustang - possibly later years too.
It has a swivel designed to mount it to the steering column. You will need an M3 screw and nut for the swivel and M5 to clamp it around the column. Also another M5 to attach the actual tacho to the mount.
Printing:
I used a 30% fill with 3-4 layers for walls and seemed to work fine." https://3dcarparts.org/library/1965/Ford/Mustang/tachometer-mount https://r2-upload.3dcarparts.workers.dev/file/parts/e44cec6c-762f-4615-809e-d5d4db15ebd9/images/tachometer-mount-1_1777854933018_q1uqt8.jpg in_stock 12.68 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1965/Ford/Mustang/tachometer-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-517849d5-6466-4366-ab9b-ff1714dd7183 2015 Ford Mustang Back Seat Cup Holder "Cup holder for the back seat. Was meant to mimic a 1965 mustang rally pac: https://www.thingiverse.com/thing:6714522
Test fit was from a 2016 Mustang Base GT. Assuming it fits all of the S550's? Prints in 2 halves without needing supports - Glue together. The bezel in the center is to help hide the seam. Bezel prints with supports so the rounded top is up.
Added an additional Can sized ring to reduce the size (fits can with koozie), can be used or removed easily. Otherwise, it's pretty big, fits pretty much everything i've thrown at it (within reason).
Credit where it is due. Inspiration for where to put this was from Flow State Manufacturing: https://www.flowstateman.com/shop/p/2015-2024-ford-mustang-rear-cupholders where you can purchase one of theirs if you'd like (not affiliated)." https://3dcarparts.org/library/2015/Ford/Mustang/back-seat-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/517849d5-6466-4366-ab9b-ff1714dd7183/images/back-seat-cup-holder-1_1777854920950_llp0v4.jpg in_stock 36.20 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Ford/Mustang/back-seat-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dc04b9e6-a995-4e46-a306-491d9d8436a2 1994 Ford Mustang Speaker Mounting Bracket "This is a mounting bracket to replace the original 5""x7"" oval bracket in a 4th generation Mustang. This fits a 5-1/4"" round speaker. I don't know for sure but I suspect this will fit other Ford products with the Mach 460 sound system." https://3dcarparts.org/library/1994/Ford/Mustang/speaker-mounting-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/dc04b9e6-a995-4e46-a306-491d9d8436a2/images/speaker-mounting-bracket-1_1777854915144_6a4ocn.jpg in_stock 29.23 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Ford/Mustang/speaker-mounting-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3b8d6449-e5c1-4530-b2af-f909279b689d 1962 Ford Falcon Vent Duct "This if a vent duct for a 1962 Ford Falcon. My friend was adding A/C from a Mustang, and needed the duct to be reproduced but with a 2"" vs. 3"" hose inlet." https://3dcarparts.org/library/1962/Ford/Falcon/vent-duct https://r2-upload.3dcarparts.workers.dev/file/parts/3b8d6449-e5c1-4530-b2af-f909279b689d/images/vent-duct-1_1777854909343_z20jgx.jpg in_stock 15.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1962/Ford/Falcon/vent-duct?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3377038d-f261-4cf8-8ab6-ccc0fc62afa0 2011 Ford Mustang Decklid Panel Repair Clips "If you're here, you’ve probably broken one (or all) of those plastic clips that hold your decklid trim in place. Been there. So I designed these repair clips to bring your trim back into alignment without resorting to sketchy adhesives or junkyard scavenging.
These clips are a drop-in repair solution for the 2011-4 Mustang. I modelled them based on the factory clip dimensions, but beefed them up in the right spots to make them more durable when reinstalled.
✅ Features:
Modelled for accurate fitment
Printed in PETG or ABS, PLA is not recommended as the decklid can get hotter than the sun.
Zero trimming or modding required
Print with tree supports and brim print-bed adhesion.
🖨️ Recommended Print Settings:
Material: PETG or ABS (PLA might work, but is more brittle)
Layer Height: 0.2mm, I used dynamic quality on my Creality V3 SE
Infill: minimum 20%
Orientation: Print sideways
🔧 Installation Tips:
Ensure the cutouts on the decklid are free from any glue that is left over when the decklid backing plate and cover are assembled at the factory. Secure in place with heat-resistant tape or plastic-friendly epoxy. You may want to consider welding the clips to the mounting plate for added strength. When fitting the cover back on the trunk, I also added a perimeter of 3M automotive 1.8mm foam tape to keep everything in place.
Theres also a support for the 2 screws on either lower corner, mine were splintered so I made these to either replace or slide over to prevent what's left from falling to pieces.
Notes
The ""Fit check"" file is useful for seeing how the clip fits in the aperture and avoids slipping inside the trunk lid void.
The clip is not meant to fill the metal-work opening; the combined positioning gives the right level of tension." https://3dcarparts.org/library/2011/Ford/Mustang/decklid-panel-repair-clips https://r2-upload.3dcarparts.workers.dev/file/parts/3377038d-f261-4cf8-8ab6-ccc0fc62afa0/images/decklid-panel-repair-clips-1_1777854635163_2mfngb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2011/Ford/Mustang/decklid-panel-repair-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dabf5d69-959e-4a19-9f2a-faced793cec9 1969 Ford Mustang A/C center vent duct linkage arm "A duct linkage arm for the A/C center vent of a 69-70 Ford Mustang or Mercury Cougar replaces the one shown below.
https://secure.cougarpartscatalog.com/store/p/14341-Duct-Linkage-Arm-A/C-Center-Vent-Used-1969-1970-Mercury-Cougar-/-1969-1970-Ford-Mustang.html?attribs=87" https://3dcarparts.org/library/1969/Ford/Mustang/ac-center-vent-duct-linkage-arm https://r2-upload.3dcarparts.workers.dev/file/parts/dabf5d69-959e-4a19-9f2a-faced793cec9/images/ac-center-vent-duct-linkage-arm-1_1777854627060_8x5tem.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1969/Ford/Mustang/ac-center-vent-duct-linkage-arm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-79da18f1-bbd1-4118-b272-aefa495f3983 1965 Ford Mustang Seat Access Hole Plug Cover up the access holes to get to the seats in your Mustang. This is a smart preventive maintenance that you can easily do in no time. This will prevent water from getting in and causing rust issues to your pony. Maintaining a classic and clean interior presentation will keep your 1965-1970 Mustang lasting longer. https://3dcarparts.org/library/1965/Ford/Mustang/seat-access-hole-plug https://r2-upload.3dcarparts.workers.dev/file/parts/79da18f1-bbd1-4118-b272-aefa495f3983/images/seat-access-hole-plug-1_1777854617696_69fwnh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1965/Ford/Mustang/seat-access-hole-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d072c6c3-7f74-409a-90b5-5da47f5db04b 2008 Ford Mustang Trunk Fastener I created this fastener after stripping out the fastener in my trunk after replacing my turn signal lights. The original had two teeth that gripped the threads. I created mine with four and it is more durable than the original. I printed the file with PLA, but I may make some with ABS to be a little stronger. https://3dcarparts.org/library/2008/Ford/Mustang/trunk-fastener https://r2-upload.3dcarparts.workers.dev/file/parts/d072c6c3-7f74-409a-90b5-5da47f5db04b/images/trunk-fastener-1_1777854609325_l11x9p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2008/Ford/Mustang/trunk-fastener?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-73304665-7810-4f55-86a9-70161b31c4df 1989 Ford Mustang Head Lamp Retaining Clip "This is a retaining clip for a car's headlight. I used it on an '89 Ford Mustang but it would probably work on many other Ford models.
After designing and printing it it was a little smaller than I liked so I scaled it up by 6% for a better fit." https://3dcarparts.org/library/1989/Ford/Mustang/head-lamp-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/73304665-7810-4f55-86a9-70161b31c4df/images/head-lamp-retaining-clip-1_1777854604923_vvj64f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1989/Ford/Mustang/head-lamp-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2f127ff8-facc-4daa-8b57-44bbd2cbef56 1996 Ford Mustang Throttle Body Smoke Test Cover "Printed with TPU, 25% infill, very snug fit onto the opening of our OEM throttlebodies. This is one piece for smoke testing the entire intake system (versus wrestling with a plastic baggie and tightening your intake tube over top of it). Another version will have a 9.5mm wide nozzle to attach a hose to for pumping smoke in without having to disconnect a million things.
Rear cover will be uploaded as well that will allow you to test a throttle body's o-rings on the shafts (which is why I designed this in the first place) without having to repeatedly pull it." https://3dcarparts.org/library/1996/Ford/Mustang/throttle-body-smoke-test-cover https://r2-upload.3dcarparts.workers.dev/file/parts/2f127ff8-facc-4daa-8b57-44bbd2cbef56/images/throttle-body-smoke-test-cover-1_1777854600732_tqoh7t.jpg in_stock 13.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1996/Ford/Mustang/throttle-body-smoke-test-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dad9cc92-ff6e-4e00-b262-62e2b7ec2fd5 2010 Ford Mustang Sunglass Holder Made for the quick disconnect plug system in the S197 Mustang sun visors https://3dcarparts.org/library/2010/Ford/Mustang/sunglass-holder https://r2-upload.3dcarparts.workers.dev/file/parts/dad9cc92-ff6e-4e00-b262-62e2b7ec2fd5/images/sunglass-holder-1_1777854596127_fw4zkw.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Ford/Mustang/sunglass-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eaab6823-9982-44b5-b45c-1c6cf1b1df5c 1969 Ford Mustang Radio Bezel "This is a bezel that surrounds the radio and heat controls of the 1969-70 era Ford Mustang. It is specifically designed to work with a modern single DIN radio cage.
Application video: https://youtu.be/flPSexDagvY" https://3dcarparts.org/library/1969/Ford/Mustang/radio-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/eaab6823-9982-44b5-b45c-1c6cf1b1df5c/images/radio-bezel-1_1777854196625_sxwuhj.jpg in_stock 21.81 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1969/Ford/Mustang/radio-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b7b75cc6-d0e8-4aeb-b8b6-2a4e688ce55a 1979 Ford Mustang Blank Dash Bezel "Updated, Split top section from bottom for easier printing and slicing so you can stagger seams for a stronger end result. Also corners fit better, top screw holes my need ovaled for installation.
Made a remix of the 79-86 Mustang dash bezel @restoprintsllc made. Filled in all of the factory openings so I could customize it how I like and rounded off the corners for a better fit.
I had to slice it into thirds and used a few alignment tabs along with plastic epoxy to attach them together.
I printed it out in Flashforge PETG-CF Midnight Blue filament. On a Elegoo Centauri Carbon with 0.2 layer height with a 0.4 mm Brass-Hardened Steel tip." https://3dcarparts.org/library/1979/Ford/Mustang/blank-dash-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/b7b75cc6-d0e8-4aeb-b8b6-2a4e688ce55a/images/blank-dash-bezel-1_1777854189783_xazdyy.jpg in_stock 44.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Ford/Mustang/blank-dash-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d3c0709e-9de6-487e-beb6-5f84a80b07c5 2005 Ford Mustang 2DIN to 1DIN Radio Adapter with Case Adapter for insert 1DIN radio to 2DIn slot in Ford Mustang 2005-2014 https://3dcarparts.org/library/2005/Ford/Mustang/2din-to-1din-radio-adapter-with-case https://r2-upload.3dcarparts.workers.dev/file/parts/d3c0709e-9de6-487e-beb6-5f84a80b07c5/images/2din-to-1din-radio-adapter-with-case-1_1777854176976_aoopzg.jpg in_stock 17.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/2din-to-1din-radio-adapter-with-case?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e07ce38-539f-4c10-aa99-b01e76e688c2 2005 Ford Mustang GT Fog Light Hella 500 Conversion Housing "This is a Hella 500 housing to convert the Ford Mustang GT (S197) 2005-2009 stock fog lights. The goal is to retain the ability to aim the lights while being able to use upgraded Hella 500 bulb housings, specifically the Black Magic series.
https://myhellalights.com/product/hella-500-black-magic/
I like the blacked out look when used behind a billet grill as they almost completely disappear when turned off. Additionally, they stay clear longer since they use glass lenses over the stock plastic ones.
Originally I simply modified the stock housings, but found it difficult/impossible to change the relatively short lived bulbs when they burned out without completely disassembling and having to glue them in again. This design should not only make it easier to convert to the Hella 500 style housings, while still retaining the ability to aim and change the bulbs.
This is a work in progress, so please feel free to give any feedback if you have any.
UPDATE: Changes coming soon to add a locking ring mechanism for the front ring, along with some other minor tweaks. Will add the updated models and pictures once I've had a chance to complete the design changes, print and test them." https://3dcarparts.org/library/2005/Ford/Mustang%20GT/fog-light-hella-500-conversion-housing https://r2-upload.3dcarparts.workers.dev/file/parts/1e07ce38-539f-4c10-aa99-b01e76e688c2/images/fog-light-hella-500-conversion-housing-1_1777854166830_bd74nq.jpg in_stock 17.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2005/Ford/Mustang%20GT/fog-light-hella-500-conversion-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7373360b-c1f0-4f19-9baa-c42e094203a7 2015 Ford Mustang Center Stack Toggle Switch Set "I didn't like how the non-premium S550 mustang had buttons instead of switches for hazard lights, traction control, and steering wheel mode. So a friend of mine sent me rough dimensions for his premium package toggle switches, and I made a CAD for a set of 3 switches to replace the buttons. I used a cutoff nail to secure each switch to the switch box, but anything that's cylinder shaped and fits the hole should work. The light insert should be printed with some kind of clear filament if you want light to be visible on the front of the switch, I used clear PETG. Some sanding might be required for the button to move smoothly through the switch box.
------------------------------------------------IMPORTANT-------------------------------------------------------
You will need to remove the entirety of your dash and center console to remove and replace the buttons. It's not that hard, but it's necessary to swap out the buttons for switches.
Here's a good tutorial- https://www.youtube.com/watch?v=WZ8U_djscjw
You can stop the video at 6:45, the rest of the video is replacing the whole system.
You then have to take off the black plastic cover on the back of the removed system, this is done by taking out 10-15(I can't remember the exact count) screws. This will expose the whole motherboard. You then need to take out the 5-7(I can't remember this either) silver screws holding the mother board on. This gives you access to the buttons, you need to keep the large bracket that holds all of the buttons in, the one that the start button is attached to. But take out all of the buttons and individual brackets that hold them in.
If this is too confusing text me at 682-213-1756, I can walk you through it step by step." https://3dcarparts.org/library/2015/Ford/Mustang/center-stack-toggle-switch-set https://r2-upload.3dcarparts.workers.dev/file/parts/7373360b-c1f0-4f19-9baa-c42e094203a7/images/center-stack-toggle-switch-set-1_1777854155055_stydwv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Ford/Mustang/center-stack-toggle-switch-set?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-62e6220f-c066-48c7-b955-a47bb1508296 2018 Ford Mustang Rear Lower Bumper Winglet Centre "2018 - 2024 Ford mustang winglet
under centre lower bumper, use factory bolts." https://3dcarparts.org/library/2018/Ford/Mustang/rear-lower-bumper-winglet-centre https://r2-upload.3dcarparts.workers.dev/file/parts/62e6220f-c066-48c7-b955-a47bb1508296/images/rear-lower-bumper-winglet-centre-1_1777854151957_ss79pt.jpg in_stock 13.14 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2018/Ford/Mustang/rear-lower-bumper-winglet-centre?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7f1441da-bf48-4bb9-a546-fd0bb4d03df4 2015 Ford Mustang Console Coin Holder "This coin holder will fit between the cup holders in a 2015-2017 (and probably 2018) Mustang.
The STL is provided as a solid so that you can pick your wall thickness. To print:
- set infill to zero
- set top layers to zero
- set the number of bottom layers, I made mine 2mm
- set the number of perimeters, I used 4 0.4mm perimeters for a 1.6mm wall" https://3dcarparts.org/library/2015/Ford/Mustang/console-coin-holder https://r2-upload.3dcarparts.workers.dev/file/parts/7f1441da-bf48-4bb9-a546-fd0bb4d03df4/images/console-coin-holder-1_1777854148613_kpftxf.jpg in_stock 19.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Ford/Mustang/console-coin-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-46446822-a7ca-4fa7-9948-8e9ef91be3f4 1987 Ford Mustang Headlight Retainer A remix of https://www.thingiverse.com/thing:1122685 to fit an LED and knurling on the outside. https://3dcarparts.org/library/1987/Ford/Mustang/headlight-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/46446822-a7ca-4fa7-9948-8e9ef91be3f4/images/headlight-retainer-1_1777854144687_12mqda.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1987/Ford/Mustang/headlight-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9a6d4e53-8588-4591-930e-e61105db8daf 1999 Ford Mustang Headlight Retainer Clip Replacement retainer clips for the headlights of a 99-04 mustang. Direct and perfect snug fit. https://3dcarparts.org/library/1999/Ford/Mustang/headlight-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9a6d4e53-8588-4591-930e-e61105db8daf/images/headlight-retainer-clip-1_1777854141213_qwn3q8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Ford/Mustang/headlight-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f5d94c0d-d092-40a3-9f34-b2889cf9a44a 1979 Ford Mustang Body Side Molding "79 to 84 Mustang body side molding replacement.
If the original ones have been removed and no new ones are installed.
Can these be used to create a clean transition from the front or rear to the side." https://3dcarparts.org/library/1979/Ford/Mustang/body-side-molding https://r2-upload.3dcarparts.workers.dev/file/parts/f5d94c0d-d092-40a3-9f34-b2889cf9a44a/images/body-side-molding-1_1777854136663_wsgajq.jpg in_stock 20.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1979/Ford/Mustang/body-side-molding?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-34dff308-a1f0-428a-9b60-d9a56b819270 1994 Ford Mustang Trunk Spring Stopper "If your Mustang's factory spring stoppers have disintegrated, this is the print for you!
Print in TPU and it should press fit into the original spring.
Walls: 3
Infill: 20%
Top & Bottom Layers: 4" https://3dcarparts.org/library/1994/Ford/Mustang/trunk-spring-stopper https://r2-upload.3dcarparts.workers.dev/file/parts/34dff308-a1f0-428a-9b60-d9a56b819270/images/trunk-spring-stopper-1_1777854133496_jgzhny.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1994/Ford/Mustang/trunk-spring-stopper?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c14076a5-ba35-43a8-aeb7-1c7ce565846d 2013 Ford Mustang Oil Filter Wrench For Ford Mustang 2013 Coyote Oil Filter https://3dcarparts.org/library/2013/Ford/Mustang/oil-filter-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/c14076a5-ba35-43a8-aeb7-1c7ce565846d/images/oil-filter-wrench-1_1777854127864_8id6cc.jpg in_stock 19.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2013/Ford/Mustang/oil-filter-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-219b316b-5c9a-4876-a06c-f3ec72bb20b9 2012 Ford Focus Fuse Cover Clip "Other clips on thingiverse don't print all that well. This one should print pretty easily with little to no support. Once printed, just push onto the stems under the glove box. Shouldn't ever break.
Print in ABS, PETG, or PLA. 30% infill, 3-4 perimeters." https://3dcarparts.org/library/2012/Ford/Focus/fuse-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/219b316b-5c9a-4876-a06c-f3ec72bb20b9/images/fuse-cover-clip-1_1777854121424_h0xkg3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/fuse-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d138952c-77f6-4dc8-ab94-59ae2afce9a8 2013 Ford Focus ST Shifter Base Bushings Solid shifter base bushing inserts for the MK3 FOST! As pictured, they are designed to re use the metal washer/sleeve insert that the stock rubber bushings contain. I recommend some electrical tape to help hold the inserts in place on installation, I attempted to tolerance them to friction fit but the bosses in my shifter base were too inconsistent. I printed mine with 100% infill, 5 top/ bottom shell layers, and 5 wall loops. Printed in Overture ASA, nozzle temp 260/ bed temp 90. I will update if the parts deteriorate in any way, however I do not expect them to. https://3dcarparts.org/library/2013/Ford/Focus%20ST/shifter-base-bushings https://r2-upload.3dcarparts.workers.dev/file/parts/d138952c-77f6-4dc8-ab94-59ae2afce9a8/images/shifter-base-bushings-1_1777854110702_o128p6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Ford/Focus%20ST/shifter-base-bushings?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-87f55b27-0bfa-4b6f-ab8b-64992fde4b0c 2013 Ford Focus ST Rear Bumper Support "This is a replacement for the rear bumper support on the 2013-18 Focus-ST. It replaces part number CH51-A17B918-A or CM51-A17B918-AC. It fits on either right or left side. It is mounted on my 2014, but I am basing the other years on data from the internet. You will be stunned at the price from Ford, and the still-expensive junk yard parts tend to have various degrees of damage, especially at the top hole, as the parters don't seem to know how to drill out a pop rivet.
This part is what breaks if you bump something backing into a parking space. I have now figured out how to add a reverse camera to use the factory dash display.
It will not fit (too long) standard Foci, which use PN BM51-A17B918-A.
This is similar, but not an exact duplicate of the factory part, but it fits perfectly in all the critical places, and has the same general shape. It is completely out of sight unless you are under the car, so any mismatch with the other side shouldn't be an issue.
It mounts at the top (body side) with a 5mm bolt with locknut and body washers. Which will fit the hole in the sheet metal after you drill out the pop rivet. The lower hole (bumper) takes a 6mm bolt. The plastic on the replacement is a bit too thick to take the factory Tinnerman nut, but I found one at the hardware store that just fit. You could also use a locknut and big washer there as well. I ran the lower hole up through the body of the part, so the length of the lower bolt is not critical, as there is clearance for any extra length.
I printed this in ABS as temperatures at this location can be pretty high, as it is close to hot pavement and just behind the muffler. Warping was an issue, and I ended up building an enclosure in order to get a successful print. I used supports from the build plate....not sure how it could be respun to eliminate the need, and still accept the fasteners." https://3dcarparts.org/library/2013/Ford/Focus%20ST/rear-bumper-support https://r2-upload.3dcarparts.workers.dev/file/parts/87f55b27-0bfa-4b6f-ab8b-64992fde4b0c/images/rear-bumper-support-1_1777854106527_sd956w.jpg in_stock 26.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Ford/Focus%20ST/rear-bumper-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-768f6a7a-76cc-4215-812f-b1fe59f514a9 2007 Ford Focus Roof Rail C-Track Screw Cover "I bought second hand roof rails for my Ford Focus Mk2 Fase 1 from 2007 with the c-track rails. But it was missing one of the plastic covers so I modeled it for printing.
I printed it upright with support. The model is slightly different then the original but it's only aesthetics. Functional it should work.
I've included the step file for customization." https://3dcarparts.org/library/2007/Ford/Focus/roof-rail-c-track-screw-cover https://r2-upload.3dcarparts.workers.dev/file/parts/768f6a7a-76cc-4215-812f-b1fe59f514a9/images/roof-rail-c-track-screw-cover-1_1777854095126_zepchj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Ford/Focus/roof-rail-c-track-screw-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ea617e57-9170-43a3-9939-a08306290cb1 1998 Ford Focus Xenon Washer Cap "Ford Focus MK1 Xenon Washer Cap for the right side. Can easily be mirrored to the left side with a slicer of youre choice.
Fit is not the best, but works.
Tested with PETG" https://3dcarparts.org/library/1998/Ford/Focus/xenon-washer-cap https://r2-upload.3dcarparts.workers.dev/file/parts/ea617e57-9170-43a3-9939-a08306290cb1/images/xenon-washer-cap-1_1777854090093_3o7t3m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Ford/Focus/xenon-washer-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9048b69e-33e5-4ced-86d3-c815a8eb3b03 2017 Ford Focus Rear Seat Monitor Headrest Mounts "Bit of a random one, created for own use, but thought I would upload it anyway.
The brackets that came with our Lenco DVP-939 were really unsuited to our car, so I created something custom to fit.
The main parts are ABS in my case, the pad is printed in TPE to try and cause some flexibilty and friction to the TVs.
Needs 8x M5 Cap heads, and a 100mm long bit of M6 threaded rod with 2 nuts." https://3dcarparts.org/library/2017/Ford/Focus/rear-seat-monitor-headrest-mounts https://r2-upload.3dcarparts.workers.dev/file/parts/9048b69e-33e5-4ced-86d3-c815a8eb3b03/images/rear-seat-monitor-headrest-mounts-1_1777854075585_xvohts.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Ford/Focus/rear-seat-monitor-headrest-mounts?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-39a727d8-5a94-4cef-9d57-e14b1a3b2813 2004 Ford Focus Wiper Mechanism Ball Tip "Designed and printed for myself. It may be suitable for other cars. The number of the wiper mechanism on my car is 4M5117504AC.
The printed tip without a slit can be heated with a home hair dryer and it will fit on the ball
I added a lubricant inside
Demonstration - https://youtu.be/X5O7ORHkZZk" https://3dcarparts.org/library/2004/Ford/Focus/wiper-mechanism-ball-tip https://r2-upload.3dcarparts.workers.dev/file/parts/39a727d8-5a94-4cef-9d57-e14b1a3b2813/images/wiper-mechanism-ball-tip-1_1777854062941_p8jxtn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Ford/Focus/wiper-mechanism-ball-tip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b274e4f3-94e4-4611-af88-1c14e8e8c4c2 2007 Ford Focus Shifter Cap A co-workers cap for the button to move the shifter knob for his 07 ford focus SE w/ automatic transmission had the side clips that holds it in place broke and the button would fly out every time it was moved to position. so i was able to 3D scan the broken one, take a slice from the middle to match the shape, and merge it near the bottom. it was just a rough merge for testing which oddly ended up working the first try. the ends may need snipped and sanded. but it worked for him and while probably never will by needed by anyone else, is here is it if its helpful for you.. https://3dcarparts.org/library/2007/Ford/Focus/shifter-cap https://r2-upload.3dcarparts.workers.dev/file/parts/b274e4f3-94e4-4611-af88-1c14e8e8c4c2/images/shifter-cap-1_1777854023755_1wpqxq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Ford/Focus/shifter-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-55971e6b-151b-4fc9-9416-8b7084c8e3e9 2011 Ford Focus Rear Left Bumper Bracket "Ford Focus RS MK3 rear left bumper bracket (Ford 1949154, G1EY-17F767-AA).
Protective shield for rear arche. Suitable for all Ford Focus mk3 models. Needs some work with wagon and not tested with sedan.
This is a 3D scan of the original part.
Right bracket here: https://www.thingiverse.com/thing:7121959" https://3dcarparts.org/library/2011/Ford/Focus/rear-left-bumper-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/55971e6b-151b-4fc9-9416-8b7084c8e3e9/images/rear-left-bumper-bracket-1_1777853939503_8wqlqx.jpg in_stock 7.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2011/Ford/Focus/rear-left-bumper-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6c923bf5-9e13-4e90-87e3-2d00f3eea935 2008 Ford Focus Cup Holder Insert A remix of EveLMarroW's cup holder canholder, adjusted to better fit the centerconsole cupholders in my Focus mk2.5. Basically the outer part diameter has been increased by 5mm from the original design. https://3dcarparts.org/library/2008/Ford/Focus/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/6c923bf5-9e13-4e90-87e3-2d00f3eea935/images/cup-holder-insert-1_1777853923663_aajo4c.jpg in_stock 23.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Ford/Focus/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9e9499e5-cf48-4482-9bd4-5adbc35c05c2 2012 Subaru Impreza Sun Visor Bracket "printed in abs, worked.
* Still working been many months now and it has not broken or cracked and is being used normally. Highly recommend if your's breaks." https://3dcarparts.org/library/2012/Subaru/Impreza/sun-visor-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/9e9499e5-cf48-4482-9bd4-5adbc35c05c2/images/sun-visor-bracket-1_1777853509241_3cuyu8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Subaru/Impreza/sun-visor-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-77e9f67b-054a-495c-a837-8feac9cfa545 2006 Subaru Impreza WRX USB Insert "An insert for female USB leads to go into one of the empty control spaces in a 2006 Subaru Impreza WRX. The gap in the middle should be enough for two female leads to fit snugly.
This was created to set up a tidier way of containing the leads from an Atoto A6, rather than just having them hang down under the centre console.
It should fit the base Impreza as well, but I don't believe the STI has the required empty control space (you get fun stuff like diff lock controls instead)." https://3dcarparts.org/library/2006/Subaru/Impreza%20WRX/usb-insert https://r2-upload.3dcarparts.workers.dev/file/parts/77e9f67b-054a-495c-a837-8feac9cfa545/images/usb-insert-1_1777853505626_r3ba7h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Subaru/Impreza%20WRX/usb-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aacc0024-1783-4940-838f-9bc3cb6e9dbb 2002 Subaru WRX Sun Visor Clip "This is a direct replacement for a 2002 WRX sun visor clip. Mine broke a while back and rather than source one and have it shipped I decided to model my own.
I printed it on an affinia H480 with ""natural"" colored ABS and it has held up very well." https://3dcarparts.org/library/2002/Subaru/WRX/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/aacc0024-1783-4940-838f-9bc3cb6e9dbb/images/sun-visor-clip-1_1777853501672_dv3485.jpg in_stock 7.15 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/WRX/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8d6be980-10dc-4243-9578-bfae22730ac5 1993 Subaru Impreza Antenna Delete Block Off Plate A block off plate to cover up the hole left behind when you remove the antenna on a first gen Subaru Impreza. It re-uses the rubber seal under the antenna to maintain water tightness. I have a 2000 Outback Sport, if you make one for a different model let me know how it fits. I think it will fit second gen as well but I don't have one just sitting around to try it on. https://3dcarparts.org/library/1993/Subaru/Impreza/antenna-delete-block-off-plate https://r2-upload.3dcarparts.workers.dev/file/parts/8d6be980-10dc-4243-9578-bfae22730ac5/images/antenna-delete-block-off-plate-1_1777853497586_9aply0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Subaru/Impreza/antenna-delete-block-off-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b440358e-1626-4bc2-ba20-c837ab2c39df 1984 Nissan 300ZX Rear Seat Fold-Down Handle When I bought my Z31 it had one of these handles broken so I decided to design and print them. They work great and are almost identical to OEM (I made the handle a bit bigger so its easier to pull up). https://3dcarparts.org/library/1984/Nissan/300ZX/rear-seat-fold-down-handle https://r2-upload.3dcarparts.workers.dev/file/parts/b440358e-1626-4bc2-ba20-c837ab2c39df/images/rear-seat-fold-down-handle-1_1777853493609_eddqzo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/rear-seat-fold-down-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ea95e609-c83a-455c-8c42-67c8fa17950d 1985 Nissan 300ZX Shift Boot Panel These scans were recovered from a bezel-panel-trim of an 85´ z31. https://3dcarparts.org/library/1985/Nissan/300ZX/shift-boot-panel https://r2-upload.3dcarparts.workers.dev/file/parts/ea95e609-c83a-455c-8c42-67c8fa17950d/images/shift-boot-panel-1_1777853405622_uc0r00.jpg in_stock 121.92 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1985/Nissan/300ZX/shift-boot-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ccb41159-1536-4a20-a7bd-463532e4ea44 2016 Ford Focus RS Reverse Lockout Linkage / Shift Boot Retainer "2016-2018 Ford Focus RS Reverse Lockout Linkage / Shift Boot Retainer
This part is incase you find yourself breaking the original part when changing your shift boot.
It's a tight fit but it will snap together. A heat gun helps a lot to make the part more flexible" https://3dcarparts.org/library/2016/Ford/Focus%20RS/reverse-lockout-linkage-shift-boot-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/ccb41159-1536-4a20-a7bd-463532e4ea44/images/reverse-lockout-linkage-shift-boot-retainer-1_1777853377549_vtg5ya.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Ford/Focus%20RS/reverse-lockout-linkage-shift-boot-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1e0302d-9ef7-42ea-a798-b1cd3512ee51 2012 Ford C-Max / Taurus / Edge / Explorer / Escape / Flex / Police Interceptor / Focus Auxiliary Trim Plate "This fits several different Ford models. This replaces your aux input panel (Ford part # CV6Z-19C149-A) with more useful USB chargers. These are PD 3.0 and QC 4+ compatible, so they will charge devices very quickly. I recommend printing in ASA filament. You'll need to run 12 volts to the panel. I've designed places for 2-hole Wagos for easier wiring, but they are not required.
Requires:
https://www.amazon.com/gp/aw/d/B0CHMDPXSZ?psc=1&ref=ppx_pop_mob_b_asin_title
4- m3x10mm screws
2- 2 hole Wago lever lock nuts (optional)
Wire
Solder
Fits several Ford vehicles built from 2012-2019: C-Max, Taurus, Edge, Explorer, Escape, Flex, Police Interceptor, and Focus." https://3dcarparts.org/library/2012/Ford/C-Max%20%2F%20Taurus%20%2F%20Edge%20%2F%20Explorer%20%2F%20Escape%20%2F%20Flex%20%2F%20Police%20Interceptor%20%2F%20Focus/auxiliary-trim-plate https://r2-upload.3dcarparts.workers.dev/file/parts/b1e0302d-9ef7-42ea-a798-b1cd3512ee51/images/auxiliary-trim-plate-1_1777853369978_0izaj5.jpg in_stock 11.48 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/C-Max%20%2F%20Taurus%20%2F%20Edge%20%2F%20Explorer%20%2F%20Escape%20%2F%20Flex%20%2F%20Police%20Interceptor%20%2F%20Focus/auxiliary-trim-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e1d51838-1fad-47a1-b995-361f5faa6948 2007 Ford Focus HVAC Vent Control Knob This was made to replace the vent control knob for a 2007 Ford Focus. It is slightly larger than the heat/cool and fan speed knobs. It fits a little loose. https://3dcarparts.org/library/2007/Ford/Focus/hvac-vent-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/e1d51838-1fad-47a1-b995-361f5faa6948/images/hvac-vent-control-knob-1_1777853365204_5y3z34.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Ford/Focus/hvac-vent-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c322320a-9d0f-431f-bc3a-47ba60329907 2016 Ford Focus License Plate Bracket License plate bracket to replace the factory plate holder on the 2016-2018 Ford Focus RS. Allows for the use of standard 5mm stainless hardware (M5-0.8x12) without the risk of scratching your paint with screws that are too long. Uses the factory rubber standoffs to prevent vibration, tested with a license plate frame. https://3dcarparts.org/library/2016/Ford/Focus/license-plate-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/c322320a-9d0f-431f-bc3a-47ba60329907/images/license-plate-bracket-1_1777853356565_evq5qk.jpg in_stock 12.79 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Ford/Focus/license-plate-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-08e13311-0b36-4a62-85c3-10d4e03df937 2013 Ford Escape Recovery Hook Cover "This is an insert to cover the recovery hook socket on a 13-16 Ford Escape. *might* work on Focus but I don't have any way to check.
Support material is required.
May require some whittling and fitment with a pocketknife after printing. Mine snapped in without too much trouble.
Don't use PLA for this if you expect it to last any time." https://3dcarparts.org/library/2013/Ford/Escape/recovery-hook-cover https://r2-upload.3dcarparts.workers.dev/file/parts/08e13311-0b36-4a62-85c3-10d4e03df937/images/recovery-hook-cover-1_1777853348992_1bir6i.jpg in_stock 7.79 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Ford/Escape/recovery-hook-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-133d6c79-f09e-4c23-8a4e-0db1fcf216f8 2011 Ford Focus Phone Holder Vent Clip Adapter "You can print all the parts from Abdel design and just change the clip part by this one.
I tested it only on my Ford Focus MK3, to be clipped on the vent port as you can see on the pictures." https://3dcarparts.org/library/2011/Ford/Focus/phone-holder-vent-clip-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/133d6c79-f09e-4c23-8a4e-0db1fcf216f8/images/phone-holder-vent-clip-adapter-1_1777853342747_5sd58g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/phone-holder-vent-clip-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-72c37f14-1bdc-48ef-8f6c-c788e320d3e5 2011 Ford Focus Privacy Cover Pin Hinge This is a replacement for the pin hinge that the privacy cover pivots on. It may have to be glued in place if your old one has ripped out. https://3dcarparts.org/library/2011/Ford/Focus/privacy-cover-pin-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/72c37f14-1bdc-48ef-8f6c-c788e320d3e5/images/privacy-cover-pin-hinge-1_1777853338866_1636d5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/privacy-cover-pin-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-58a582be-6422-4b27-8eaa-d8f592ea13ce 2011 Ford Focus Trunk Floor Support Restoration of the luggage compartment floor with supports to be glued with cyanoacrylate or epoxy glue, the floor is inserted first from the left side and then hooks onto the right side. https://3dcarparts.org/library/2011/Ford/Focus/trunk-floor-support https://r2-upload.3dcarparts.workers.dev/file/parts/58a582be-6422-4b27-8eaa-d8f592ea13ce/images/trunk-floor-support-1_1777853328592_pcf8gw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/trunk-floor-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-28be0825-748f-48a8-a041-32a105863473 1994 Ford Multiple Models Headlight Bulb Retainer "This is the part that secures your Ford's headlight to its housing assembly. There are three ""fingers"" that press down on the flanged edge of the bulb and keep it from moving.
The actual replacement part can be found here: https://www.amazon.com/Ford-F4DZ-13N019-A-RETAINER-BULBS/dp/B000O0BGY0
You can use Amazon's ""Filter by Vehicle"" tool to check the fit on your car.
I replaced my 2001 Explorer Sport Trac's headlights with LEDs (I HIGHLY recommend doing so, it makes a huge difference and made night time driving so much safer!) and, being that the thing is almost old enough to vote, the OEM plastic part broke when I took it off.
I also included a second version of the clip, which has twice as many fingers for extra grip. Your headlights may or may not need them, it's up to you.
Instead of paying $20 for a pair, I drew them up and printed them out instead. Much faster and cheaper that way.
Part number I found is F4DZ-13N019-A, which apparently fits the following:
2000-2004 Ford F-150
1998-2011 Ford Crown Victoria
1997-2003 Ford Escort
2001-2003 Ford Explorer
2001-2005 Ford Explorer Sport Trac
2001-2011 Ford Ranger
2005-2007 Ford Focus
1996-1997 Ford Thunderbird
1994-1995 Ford Taurus
Hope this helps someone else out. Enjoy!" https://3dcarparts.org/library/1994/Ford/Multiple%20Models/headlight-bulb-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/28be0825-748f-48a8-a041-32a105863473/images/headlight-bulb-retainer-1_1777853321185_x4ny7m.jpg in_stock 11.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1994/Ford/Multiple%20Models/headlight-bulb-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-29311daf-4fc9-4527-b8ce-83a9c3498179 2007 Ford Focus Door Cup Holder Vape Insert "Seemed to fit pretty well in my '07 Focus ZX4 SE driver door cupholder. Sized for a Smok Priv II box mod, but easily changed in Fusion 360.
Made slices in the bottom with razor blade and used silicone adhesive to keep snug to door cupholder, will see if keeps if from pulling out when I grab my vape (I could probably use a fraction more clearance in the box mod cutout)
Problem was cup holder in door isn't full circle, so vape slides out of cup holder on regular basis. Keeping in my hand wasn't desirable either while driving.
This promises to make quickly accessible your vape while rocking your Focus at 30+ mpg." https://3dcarparts.org/library/2007/Ford/Focus/door-cup-holder-vape-insert https://r2-upload.3dcarparts.workers.dev/file/parts/29311daf-4fc9-4527-b8ce-83a9c3498179/images/door-cup-holder-vape-insert-1_1777853314678_96vneb.jpg in_stock 25.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Ford/Focus/door-cup-holder-vape-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-45fd35ce-21f3-4ca0-85a5-a85e902b32c3 2011 Ford Focus Boot Cover Slider the boot cover slides on this in the trunk sides. breaks often. https://3dcarparts.org/library/2011/Ford/Focus/boot-cover-slider https://r2-upload.3dcarparts.workers.dev/file/parts/45fd35ce-21f3-4ca0-85a5-a85e902b32c3/images/boot-cover-slider-1_1777853311288_feoyam.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/boot-cover-slider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-63bfa5f9-2bdd-47f1-96d2-5ce3104fe7e6 2005 Ford Focus Rear Number Plate Bracket "Made to suit Australian full size number plates for a 2005 Mk2 Ford focus sedan (probably fits a hatch up to 2012, haven't cheeked), M5 Screws, slight counter sink for screws behind plate.
Fits on a standard ender 3 bed size 220MM x 220MM diagonally." https://3dcarparts.org/library/2005/Ford/Focus/rear-number-plate-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/63bfa5f9-2bdd-47f1-96d2-5ce3104fe7e6/images/rear-number-plate-bracket-1_1777853293847_el07zh.jpg in_stock 14.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Ford/Focus/rear-number-plate-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-edbc38a6-47f8-4be8-acef-8f8fefdd6055 2011 Ford Focus Window Crank Knob Replacement knob / button for the rear window cranks https://3dcarparts.org/library/2011/Ford/Focus/window-crank-knob https://r2-upload.3dcarparts.workers.dev/file/parts/edbc38a6-47f8-4be8-acef-8f8fefdd6055/images/window-crank-knob-1_1777853278193_r9g3m2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/window-crank-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6d1368e0-27e5-4b21-8076-a9cebe592912 2006 Mercedes-Benz Sprinter Headlight Dust Cover "This is a replacement part made for a Mercedes Sprinter Van Bulb Cover. Part number 158 222-00.
According to the manufacturer, this part should fit also to:
- AUDI A3 8P 08-
- VW BEETLE
- VW CRAFTER 06-13
- VW GOLF VI
- VW JETTA
- VW TIGUAN
- BMW 5 F10
- BMW 5 F11
- BMW 3 F20
- MERCEDES E CLASS W211
- MERCEDES E CLASS W212
- MERCEDES C CLASS W204
- MERCEDES SLK CLASS W171
- MERCEDES S CLASS W222
- MERCEDES B CLASS W246
- MERCEDES CLA CLASS W117
- MERCEDES SPRINTER W906
- CITROEN C6
- OPEL ZAFIRA C
- SKODA OCTAVIA III 5E
- MINI COOPER R56
It fits perfectly in the place of an old one and has an additional grip to help with tightening.
It only needs a Seal to give some weatherproofing. I have used a PVC flat foam seal, but anything foam or rubber will work.
For the last year, it did not break or leak." https://3dcarparts.org/library/2006/Mercedes-Benz/Sprinter/headlight-dust-cover https://r2-upload.3dcarparts.workers.dev/file/parts/6d1368e0-27e5-4b21-8076-a9cebe592912/images/headlight-dust-cover-1_1777852866829_2w8rge.jpg in_stock 18.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2006/Mercedes-Benz/Sprinter/headlight-dust-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-975019f4-a559-4392-806c-1ae612e0fb08 2002 MINI Cooper Cup Holder The cup holder in the R53 sucks especially if you drive a stick. This uses the existing cup holder to hold it. https://3dcarparts.org/library/2002/MINI/Cooper/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/975019f4-a559-4392-806c-1ae612e0fb08/images/cup-holder-1_1777852853435_hyhbt4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/MINI/Cooper/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-943273ce-303e-4fc4-bf5c-9a726cf8dad2 2007 Mini Cooper Shift Knob "Designed this when the cap on top of the stock knob broke.
Meant to be used with this adapter: https://blackforestindustries.com/collections/mini-shift-knobs/products/copy-of-bfi-gs-manual-shift-knob-adapter-bmw-mini-revised-clamp-style
It is important that you print this in PETG or ASA. PLA is not suitable and will likely deform/melt if left in a hot vehicle.
The version with the cavity in the center is so that weight may be added during the printing process. Add a pause on the last layer before the ceiling of the cavity is added. Then, place your desired weight inside. I used sand. It adds a bit of weight but is still pretty light.
There is 0.2mm of offset on the threads so that the knobs can actually be screwed onto the adapter. If it is still too tight to fit when printed with your printer, you may be able to add a bit of extra clearance by increasing the print size by a percent or two." https://3dcarparts.org/library/2007/Mini/Cooper/shift-knob-2 https://r2-upload.3dcarparts.workers.dev/file/parts/943273ce-303e-4fc4-bf5c-9a726cf8dad2/images/shift-knob-2-1_1777852839088_uiu79l.jpg in_stock 19.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/shift-knob-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0d5ab6e1-708d-4941-820e-629de9b325be 2002 Mini Cooper Ultra Gauge & 52mm Gauge Mount "The original file has the ultra gauge on the right and it sits way to high and blocked by the steering wheel.
I decided to remix this mount. Ultra gauge is placed on the left and your 52mm gauge on the right. The tolerance is pretty tight so make sure before you slide your AEM wideband in it's straight and ready to be installed.
I also included cut outs so the up/down button are accessible when installed into the bracket.
I used a m3 threaded insert into the ultra gauge side and was able to secure the bracket holding the ultra gauge no problem." https://3dcarparts.org/library/2002/Mini/Cooper/ultra-gauge-52mm-gauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/0d5ab6e1-708d-4941-820e-629de9b325be/images/ultra-gauge-52mm-gauge-mount-1_1777852831095_zfdpmd.jpg in_stock 19.69 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Mini/Cooper/ultra-gauge-52mm-gauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fa417535-729a-43a9-9a5a-fcab1f77a17c 2001 MINI Cooper Single Gauge Pod 52mm "Gauge pod for a single gauge that houses a 52mm gauge on a mini cooper generations r50 r52 r53.
Depending on your tolerances you may need to shrink the tachometer mounting part that screws in by .5 mm or just file it down like I did" https://3dcarparts.org/library/2001/MINI/Cooper/single-gauge-pod-52mm https://r2-upload.3dcarparts.workers.dev/file/parts/fa417535-729a-43a9-9a5a-fcab1f77a17c/images/single-gauge-pod-52mm-1_1777852822004_e5kk4t.jpg in_stock 17.53 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/MINI/Cooper/single-gauge-pod-52mm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a738f8ab-3bfb-40e8-9fb6-443bc9f9af23 2002 Mini Cooper S Rear Seat Isofix Hole Plug "A simple plug for the rear seat isofix holes as I lost mine. Just push it in, made it a pretty tight fit. Could be scaled down slightly if it doesn't fit your seats.
2 models, 1 with raised letters for multicoloured printing and another with embossed letters that are easier to fill with paint etc
Printed face down with a glass bed to give a better finish and to save on infill material, raised letters should be printed face up with tree supports" https://3dcarparts.org/library/2002/Mini/Cooper%20S/rear-seat-isofix-hole-plug https://r2-upload.3dcarparts.workers.dev/file/parts/a738f8ab-3bfb-40e8-9fb6-443bc9f9af23/images/rear-seat-isofix-hole-plug-1_1777852810466_4egqr9.jpg in_stock 8.81 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Mini/Cooper%20S/rear-seat-isofix-hole-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf323065-3043-41a2-a4c5-edf1a51b213f 2001 Mini Cooper Headlamp Washer Nozzle Clip I removed my headlamp / headlight washer jets and the clips fell to pieces. These replace them, and have a bit to grip with pliers if I need to take them out again. https://3dcarparts.org/library/2001/Mini/Cooper/headlamp-washer-nozzle-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bf323065-3043-41a2-a4c5-edf1a51b213f/images/headlamp-washer-nozzle-clip-1_1777852802224_gv960z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Mini/Cooper/headlamp-washer-nozzle-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-971d279a-d6df-4053-9a54-0855a36d599d 2002 MINI Cooper Cup Holder Rim Best to print in PETG for anything automotive so it does not heat warp in the summer. https://3dcarparts.org/library/2002/MINI/Cooper/cup-holder-rim https://r2-upload.3dcarparts.workers.dev/file/parts/971d279a-d6df-4053-9a54-0855a36d599d/images/cup-holder-rim-1_1777852796167_q4fq53.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/MINI/Cooper/cup-holder-rim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9c859780-50e9-4b02-b94e-37f135d5c650 2007 Mini Cooper Shift Knob Adapter "This is an adapter I made for the Mini R56 Shifter.
I purchased the ""QIANG KUN Universal Shift Knob 6 Speed Manual Gearbox Shift Knobs Fit for Most Car Transport Vehicles (Round Head R Up)"" Shift knob from Amazon but the adapters it had did not fit the Mini R56 shifter stick properly and got loose after a few days of use. This adapter has a snug fit on both the shifter stick and the shift knob.
Mini R56 Shifter stick is 14mm in diameter
Shifter Knob has a 16mm hole
Note: Once you insert the adapter into the knob, you might need to mark and drill holes in the places were the bolts will be inserted. In my case, I used a soldering iron to make the holes.
Shift Knob URL: https://www.amazon.com/gp/product/B0BG591JXN" https://3dcarparts.org/library/2007/Mini/Cooper/shift-knob-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/9c859780-50e9-4b02-b94e-37f135d5c650/images/shift-knob-adapter-1_1777852786691_09ahyj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/shift-knob-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8bb475fa-3b75-4978-b799-703718360f9b 2001 MINI Cooper Shift Knob Extension "I printed [this](https://www.thingiverse.com/thing:4731515) shifter grip for my 2005 MINI Cooper R52, but the hole was too long to lock into the shifter, meaning the handle would spin freely. I designed this extension to go between the shifter and the handle, and keep it from spinning.
**I can't vouch for the strength of this, use at your own risk.** It shouldn't cause issues, though, at the very worse it would break and your handle would spin. That's all" https://3dcarparts.org/library/2001/MINI/Cooper/shift-knob-extension https://r2-upload.3dcarparts.workers.dev/file/parts/8bb475fa-3b75-4978-b799-703718360f9b/images/shift-knob-extension-1_1777852781735_8elhog.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/MINI/Cooper/shift-knob-extension?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ef29e88d-7fdf-478f-aaeb-d6322a4e5dbe 2014 Mini Cooper MagSafe Puck Dash Holder "This is a dash holder for the Apple Magsafe Puck charger to fit the Dash of a Mini Cooper F56.
The holder attaches to the bottom of the Center ring. You can use double sided tape and/or use the 2 holes and drill through the bottom of the center ring. Obviously take of the ring first :)" https://3dcarparts.org/library/2014/Mini/Cooper/magsafe-puck-dash-holder https://r2-upload.3dcarparts.workers.dev/file/parts/ef29e88d-7fdf-478f-aaeb-d6322a4e5dbe/images/magsafe-puck-dash-holder-1_1777852777378_sgj7c1.jpg in_stock 10.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Mini/Cooper/magsafe-puck-dash-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21e259b5-693f-4000-b611-03edca747e55 2001 Mini Cooper Tachometer-Mounted Phone Holder Bracket Mount phone from this holder that mounts to the back side of tachometer using existing bolt holes. Print from high temperature nylon or comparable material. I laser cut the plate from aluminum and turned the post and ball from delrin. The ball mounts to plate with an M5-0.8 x 12mm long stainless steel BHCS. I used a washer head wood screw with same thread as the factory from hardware store to mount bracket to tachometer. https://3dcarparts.org/library/2001/Mini/Cooper/tachometer-mounted-phone-holder-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/21e259b5-693f-4000-b611-03edca747e55/images/tachometer-mounted-phone-holder-bracket-1_1777852761089_kaslni.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper/tachometer-mounted-phone-holder-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fc449339-36df-4687-8503-42a37233db0e 2006 Mini Cooper S Radio Volume Knob "This is the volume knob for the radio in a 2006 Mini Cooper S, R52. Our OEM knob sort of fell apart, so I recreated it with measurements from the radio, and referencing other's pictures online. It isn't a perfect match to the OEM part, but it's close enough.
It's a tight fit on the shaft. If you can't get it on, either scale it up a slight bit, or open the Fusion 360 file and change the dimensions in Sketch 1. I may have made it a little longer than the stock knob, I had to just guess on the height from the pictures. You can modify the second extrude to shorten it as desired." https://3dcarparts.org/library/2006/Mini/Cooper%20S/radio-volume-knob https://r2-upload.3dcarparts.workers.dev/file/parts/fc449339-36df-4687-8503-42a37233db0e/images/radio-volume-knob-1_1777852755743_b5tqcr.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Mini/Cooper%20S/radio-volume-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40488e6c-1718-4e6c-b0e0-f27850ec7209 2002 MINI Cooper S Wheel Nut Caps Wheel nut caps in R53 Owners Club style. 17mm and to fit lock nut. https://3dcarparts.org/library/2002/MINI/Cooper%20S/wheel-nut-caps https://r2-upload.3dcarparts.workers.dev/file/parts/40488e6c-1718-4e6c-b0e0-f27850ec7209/images/wheel-nut-caps-1_1777852744467_30lsb2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/MINI/Cooper%20S/wheel-nut-caps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2cd01631-2422-41ac-b46d-464a600adaac 2010 Mini Cooper S OBD2 and CarPlay Screen Mount "I created a tach mount for a CarPlay/Android Auto screen that uses a standard 17mm ball, as well as an OBD2 screen that shows me the Temperature/Revs/Speed/12V.
It mounts to the official mini mount for the tach, note that this is a plastic part so be gentle with the screws when installing.
My specific Mini model is the Mini Cooper S 2010 but it should work with all the R models afaik
I have also decomposed the file into an OBD2 Mount, a Carplay Mount or a combined mount so you can just grab the one that you need." https://3dcarparts.org/library/2010/Mini/Cooper%20S/obd2-and-carplay-screen-mount https://r2-upload.3dcarparts.workers.dev/file/parts/2cd01631-2422-41ac-b46d-464a600adaac/images/obd2-and-carplay-screen-mount-1_1777852729274_f2rf04.jpg in_stock 17.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2010/Mini/Cooper%20S/obd2-and-carplay-screen-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-01318b2f-7ab6-49da-a5df-cef65baf4c83 2001 Mini Cooper Rear Cupholder Adapter "This adapter converts the rear cupholder for a 2003 mini cooper from a 65mm x 70mm (diameter x height) cupholder to a 100mm cupholder to hold a larger water bottle.
***
06/05/2025 V1: Just sketched and extruded rough outline for the shape; I need to measure the actual sizes and adjust.
11/07/2025 V2: Changed bottle from 100mm to 110mm. Changed lower half diameter from 60mm to 65mm.
15/07/2025 V2.1: Decreased cupholder height to 65mm.
16/07/2025 V2.2: Decreased cupholder height to 61mm. Increased cupholder thickness from 3mm to 5mm as I was concerned it wouldnt be strong enough for big bottles.
18/07/2025 V2.3: Added Chamfer to cupholder bottom" https://3dcarparts.org/library/2001/Mini/Cooper/rear-cupholder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/01318b2f-7ab6-49da-a5df-cef65baf4c83/images/rear-cupholder-adapter-1_1777852719379_6de8pv.jpg in_stock 30.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper/rear-cupholder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7d1a8b74-6cc8-4450-b664-6fd87cca1ebb 2010 Mini Cooper S Tachometer / OBD2 Display Mount "This is a tach mount that I made for my 2010 Mini Cooper S, I needed two type of standard mounts, one is the slot in the left and the other one the 17mm ball mount on the right.
I use this mount with both a CarPlay display unit and a phone mount for Android since Android Auto is unusable for me. But since the ball mount is standard you can attach pretty much anything that uses it.
The left side is for an OBD2 display that shows me some car data." https://3dcarparts.org/library/2010/Mini/Cooper%20S/tachometer-obd2-display-mount https://r2-upload.3dcarparts.workers.dev/file/parts/7d1a8b74-6cc8-4450-b664-6fd87cca1ebb/images/tachometer-obd2-display-mount-1_1777852711733_ku91l6.jpg in_stock 21.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Mini/Cooper%20S/tachometer-obd2-display-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-615f1fad-3df1-4d78-b815-0390d6636c82 2007 Mini Cooper Dual Gauge Pod "A better gauge pod for the R56 mini cooper (and probably other 2nd gen versions). This screws into the back of the stock tachometer. Standard 52 mm gauges fit. Does not interfere with the dash and is visible at most steering wheel angles.
A word of warning, the threads in the tachometer strip very easily especially if you are trying out pods like this again and again.
Print with more than 20% infill so it won't wobble.
Spacing for the holes was borrowed from someone else's model (https://www.thingiverse.com/thing:4630509)" https://3dcarparts.org/library/2007/Mini/Cooper/dual-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/615f1fad-3df1-4d78-b815-0390d6636c82/images/dual-gauge-pod-1_1777852706615_ctryuf.jpg in_stock 19.22 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/dual-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-376c938f-c2ff-4656-b692-82f65447e2b1 2001 Mini Cooper Ultragauge Mount "Ultragauge mount for 1.Gen Mini cooper.
Remix, original mount:
https://www.thingiverse.com/thing:706573
With this mount, the ultragauge is 20mm lower. Mounts right side of tachometer.
Need longer tachometer screws." https://3dcarparts.org/library/2001/Mini/Cooper/ultragauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/376c938f-c2ff-4656-b692-82f65447e2b1/images/ultragauge-mount-1_1777852701283_89hppr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper/ultragauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b0068ee6-7c3e-4ee2-a7d9-76122007c912 2001 Mini Cooper Rear Glass Wiper Plug This plug goes in the hole that is left after removing the rear wiper arm and motor from a R50 Mini Cooper. https://3dcarparts.org/library/2001/Mini/Cooper/rear-glass-wiper-plug https://r2-upload.3dcarparts.workers.dev/file/parts/b0068ee6-7c3e-4ee2-a7d9-76122007c912/images/rear-glass-wiper-plug-1_1777852696457_zg511q.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Mini/Cooper/rear-glass-wiper-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1ace05d6-b4f7-4427-a535-e8b57c115c8b 1997 Rover Mini Cooper Driver Side Auxiliary Speaker Panel Early version of an AUX panel for a rover mini cooper MPi, dont know if it will fit earlyier models. Friction fit at the moment for drivers side. https://3dcarparts.org/library/1997/Rover/Mini%20Cooper/driver-side-auxiliary-speaker-panel https://r2-upload.3dcarparts.workers.dev/file/parts/1ace05d6-b4f7-4427-a535-e8b57c115c8b/images/driver-side-auxiliary-speaker-panel-1_1777852687902_q14noz.jpg in_stock 22.74 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Rover/Mini%20Cooper/driver-side-auxiliary-speaker-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f1aedae1-92d9-4899-9b71-bdd1b5bf47b0 2014 Mini Cooper JCW Pro Exhaust Valve Cupholder Side Mount This part is mean to hold the JCW Pro Kit Exhaust valve on the side of the cupholder, rather than sitting in a cupholder that might otherwise be in use. https://3dcarparts.org/library/2014/Mini/Cooper/jcw-pro-exhaust-valve-cupholder-side-mount https://r2-upload.3dcarparts.workers.dev/file/parts/f1aedae1-92d9-4899-9b71-bdd1b5bf47b0/images/jcw-pro-exhaust-valve-cupholder-side-mount-1_1777852682878_1i5gbk.jpg in_stock 7.79 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Mini/Cooper/jcw-pro-exhaust-valve-cupholder-side-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6642d068-0716-48d1-8ba1-e34f9b4d989c 2002 Mini Cooper Washer Nozzle Angle Piece "Lost the angle piece for my windshield sprayer, modeled the other side, and printed one. This shouldn't be a problem for most resin printers but it may be a challenge on some FDM machines. Give it a shot!!
Be warned about the use of different materials and their interaction with the methyl alcohol in washer fluid. Also note that methyl alcohol is flammable, failure of this part could result in spraying a flammable liquid all over the inside of the engine bay. All I'm saying is to print with this in mind and above all, BE SAFE.
Thank you for coming to my Ted Talk" https://3dcarparts.org/library/2002/Mini/Cooper/washer-nozzle-angle-piece https://r2-upload.3dcarparts.workers.dev/file/parts/6642d068-0716-48d1-8ba1-e34f9b4d989c/images/washer-nozzle-angle-piece-1_1777852674402_v94w3z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Mini/Cooper/washer-nozzle-angle-piece?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9e4cfdc0-5146-4b29-a68f-610184aaf06b 2001 Mini Cooper S Shift Well Cover "THIS IS NOT MINE!!! ORIGINAL CREATOR IS CRAVEN SPEED!!!ALL CREDIT IS TO CRAVEN SPEED!!!
Craven Speed link to part---->https://www.cravenspeed.com/shift-well-cover-for-mini-cooper-r53-2002-2006/
Craven Speed link to CAD files ----->https://drive.google.com/drive/folders/1bZml8TipVx3BuEoCFxCUc_QMdNMFUlIK
Just thought thingiverse should have this.
For Mini Cooper S(2001-2006) R53, Manual Transmissions only.
THIS IS NOT MINE!!! ORIGINAL CREATOR IS CRAVEN SPEED!!!ALL CREDIT IS TO CRAVEN SPEED!!!" https://3dcarparts.org/library/2001/Mini/Cooper%20S/shift-well-cover https://r2-upload.3dcarparts.workers.dev/file/parts/9e4cfdc0-5146-4b29-a68f-610184aaf06b/images/shift-well-cover-1_1777852667174_kdtrty.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper%20S/shift-well-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-015802a1-397e-49ff-83b6-09a6fd430640 2001 Mini Cooper Front Door Speaker Adapter Ring "Front door speaker adapter rings for Mini Cooper R50, R52, R54.
This adapter will mount a 165mm speaker in all 1st Gen Mini Coopers.
I decided to create this model after spending endless time searching the internet for a similar item. Many speaker adapters exist on this site and elsewhere but none seem to be designed for a Mini Cooper.
The model was created such that the shape matches the original as closely as possible and the result fits perfectly in my car.
The speakers that I mounted are JBL GX600C.
Make sure you use foam sealing gaskets on both ends of the adapter to ensure a perfect seal between door and speaker. For the gasket between the door and my adapter I re-used the factory gasket that was behind my Harman Kardon speakers I replaced. For the gasket between adapter and new speakers I used the one that came with my JBL GX600C.
A gasket with inner diameter 144mm and outer diameter 166mm would work perfectly on both ends." https://3dcarparts.org/library/2001/Mini/Cooper/front-door-speaker-adapter-ring https://r2-upload.3dcarparts.workers.dev/file/parts/015802a1-397e-49ff-83b6-09a6fd430640/images/front-door-speaker-adapter-ring-1_1777852661268_0fdk0a.jpg in_stock 17.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper/front-door-speaker-adapter-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5a393ce8-ba64-4651-91ca-677ee7e1b4ff 2007 Mini Cooper Single Gauge Pod Single gauge pod that mounts to the back of the R56 mini cooper tach. Works with the Cooper S, might work with others. https://3dcarparts.org/library/2007/Mini/Cooper/single-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/5a393ce8-ba64-4651-91ca-677ee7e1b4ff/images/single-gauge-pod-1_1777852653930_9mk8xg.jpg in_stock 15.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/single-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-34564082-45cb-49ed-bcfc-de4d8483adb1 1965 Ford Mustang Front Speaker Mount "A 1965 Mustang and many other classic cars have a single 4x10 speaker (or is it called 3x9?) for the mono AM radio. As an upgrade, after-market products are offered where a pair of 3.5"" speakers fit in the hole for that 4x10 speaker. Not knowing the quality of the speakers themselves, I designed a mount for two 3.5"" speakers so I could pick the speakers. I used two Pyle speakers but I'm sure others would fit or could be adapted.
My 3D printer is not able to print something that is 10"" long so I split the design into two identical halves. The two halves interlock and two #8 sheet metal screws hold the parts secure.
As shown in the pictures, the part interfered with the speaker grill so the design was modified accordingly. The stl file looks slightly different from the pictures due to this mod. If I reprint the parts, I will upload a new set of pictures but I will only do that if I print with another material. I just cut some of the material away with a saw to create my clearance, after taking the pictures. I had other things to do than to reprint!
UPDATE (07/17/25)
I modified the design to make it a single piece which it turns out I could print by turning it to 45 degrees on the build plate. I also turned the speakers so that there are only 3 speaker mounting holes with a single screw holding the speaker tabs that are closest together. There were also some required changes as I assembled my dash for clearance of the speaker grill. I do not have any updated pictures of the printed part but there is a png of the design. I uploaded the 3mf file this time so I hope that works. I don't think that option was available when I first uploaded the design.
UPDATE (07/18/25)
I deleted the 3mf file I uploaded yesterday because it was brought to my attention that someone is selling these parts on Etsy without attribution. Sorry if you need this updated design but I did not want the updated file to be available to them since the original stl file would not permit the grill to be installed properly. So anyone purchasing this on Etsy will not get a functional part! Again, sorry for any inconvenience." https://3dcarparts.org/library/1965/Ford/Mustang/front-speaker-mount https://r2-upload.3dcarparts.workers.dev/file/parts/34564082-45cb-49ed-bcfc-de4d8483adb1/images/front-speaker-mount-1_1777852208571_ao5y1w.jpg in_stock 17.72 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1965/Ford/Mustang/front-speaker-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b246f830-4132-40bf-80de-b139ceb8d0fe 1994 Ford Mustang Side Scoop Inserts "1994-1998 Ford Mustang Xenon Urethane Side Scoop Inserts
these scoops come with lame stickers instead of a grill. use these inserts for a more finished look. I used epoxy to attach them after scuffing and cleaning the scoop opening with alcohol.
PETG or other material that will withstand the elements" https://3dcarparts.org/library/1994/Ford/Mustang/side-scoop-inserts https://r2-upload.3dcarparts.workers.dev/file/parts/b246f830-4132-40bf-80de-b139ceb8d0fe/images/side-scoop-inserts-1_1777852199216_ghingn.jpg in_stock 7.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1994/Ford/Mustang/side-scoop-inserts?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2fde7b88-7db3-47f2-b93f-7633015d1845 2005 Ford Mustang Dashboard AC Vent Joint Replacement This is a small part meant for the Generation 5 mustang dashboard AC vents. It holds both lids together and helps keep the AC vent open. The part simply snaps into place in the AC vent lids. The vent lids have a back support bar, with cut outs, which make room for the vent joint. There are also two holes on bars behind each lid that are perpendicular to the lids, in which the buckles snap into place. https://3dcarparts.org/library/2005/Ford/Mustang/dashboard-ac-vent-joint-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/2fde7b88-7db3-47f2-b93f-7633015d1845/images/dashboard-ac-vent-joint-replacement-1_1777852195383_yf7hlv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/dashboard-ac-vent-joint-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e3fe7b82-4483-4532-9bd7-ed53ed60a6e5 2005 Ford Mustang Trunk Spring Bumper Pad The bumper pads that go on the springs for the trunk of my 2007 mustang wore down, so i decided to print some new ones with flexible filament. https://3dcarparts.org/library/2005/Ford/Mustang/trunk-spring-bumper-pad https://r2-upload.3dcarparts.workers.dev/file/parts/e3fe7b82-4483-4532-9bd7-ed53ed60a6e5/images/trunk-spring-bumper-pad-1_1777852191450_o5wyen.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Ford/Mustang/trunk-spring-bumper-pad?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-abe75555-db26-464c-b62c-57f73191712e 1994 Ford Mustang Hood Vent Replacement "print the Full version in one piece or print the main and grill separate. requires the hood to be drilled and possibly some clearancing. Use 1/4-20 bolts and riv-nuts with some epoxy or just the bolts with regular nuts and washers to mount.
there is a PLAIN file without the BERSERKR symbol.
Print in material that will hold up to heat and the elements." https://3dcarparts.org/library/1994/Ford/Mustang/hood-vent-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/abe75555-db26-464c-b62c-57f73191712e/images/hood-vent-replacement-1_1777852163508_upljzw.jpg in_stock 17.36 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1994/Ford/Mustang/hood-vent-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e4baf3eb-fac8-42ef-b2b1-e861be022c56 2005 Ford Mustang Power Outlet Cover (USB) "2005-2014 Ford Mustang Power Outlet Cover
Adaptation of a multimedia usb cable
Uses two 2.9 X 6.5mm screws
Latches must be printed separately and then glued" https://3dcarparts.org/library/2005/Ford/Mustang/power-outlet-cover-usb https://r2-upload.3dcarparts.workers.dev/file/parts/e4baf3eb-fac8-42ef-b2b1-e861be022c56/images/power-outlet-cover-usb-1_1777852153793_ytt8rj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/power-outlet-cover-usb?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e38370bb-9acb-45df-9563-607bcb6cb630 2011 Ford Focus Headlight Cap This is a 2011 Ford Focus Headlight Cap made from TPU. It is very snug so a fare bit of force is needed to push this on. https://3dcarparts.org/library/2011/Ford/Focus/headlight-cap https://r2-upload.3dcarparts.workers.dev/file/parts/e38370bb-9acb-45df-9563-607bcb6cb630/images/headlight-cap-1_1777852050451_bdk7np.jpg in_stock 15.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2011/Ford/Focus/headlight-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b3ba3112-5f68-4b34-96b2-46e240c760a9 2005 Ford Focus Sun Roof Switch Panel "This is a replacement sun roof switch panel for a 2005-2007 Ford Focus. I designed this because three of the four clips were broken off of my original causing it to sag. I printed mine in Elegoo Rapid PETG, but any filament would be fine.
Edit (05-22-2025): I've had this in place in my car for about six months, but it recently fell down. One of the tabs gave out, so I'm working on making the tabs stronger as well as adding a tab to each end like the original part had." https://3dcarparts.org/library/2005/Ford/Focus/sun-roof-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/b3ba3112-5f68-4b34-96b2-46e240c760a9/images/sun-roof-switch-panel-1_1777852045420_7br05y.jpg in_stock 15.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Focus/sun-roof-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8659d07-7da3-4917-ae4e-0cf9aaf7e762 1998 Ford Focus RS Wheel Cap "Support creation - account number - 2201435026/2010
Print horizontally
The resulting quality and functionality
It depends purely on your settings
thanks to the following" https://3dcarparts.org/library/1998/Ford/Focus%20RS/wheel-cap https://r2-upload.3dcarparts.workers.dev/file/parts/c8659d07-7da3-4917-ae4e-0cf9aaf7e762/images/wheel-cap-1_1777852040444_z6fksn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Ford/Focus%20RS/wheel-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9a4eb708-a12a-4c46-9f3d-81f624a5e624 2019 Subaru XV Trunk Hook "This is a bigger trunk hook for Subaru XV (Crosstrek) which can hold bags. he original hook is... a bit weird. Tested with European Subaru XV 2019.
I printed this from PETG and it works just fine. Reuse the screws from the original Subaru hooks." https://3dcarparts.org/library/2019/Subaru/XV/trunk-hook https://r2-upload.3dcarparts.workers.dev/file/parts/9a4eb708-a12a-4c46-9f3d-81f624a5e624/images/trunk-hook-1_1777852034121_vddd5g.jpg in_stock 16.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Subaru/XV/trunk-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-655a4fbc-df25-4f28-9269-892003320d66 1984 Nissan 300ZX Dome Light Cover not perfect but fits fine as a replacement dome light for the z31. https://3dcarparts.org/library/1984/Nissan/300ZX/dome-light-cover https://r2-upload.3dcarparts.workers.dev/file/parts/655a4fbc-df25-4f28-9269-892003320d66/images/dome-light-cover-1_1777851799945_0ot3e5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/dome-light-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bd787af0-cc66-49e9-ba6e-511d1bb360a7 1984 Nissan 300ZX Shift Boot Retaining Bracket "In piecing my new-to-me car together, I was missing the factory bracket. I took a few measurements with a ruler and got it in one try to my amazement. I'm using a T5 short shifter which places the assembly really high, so I *think my boot is flipped upside down to accommodate it. This left a big curled gap blasting me with warm air on my test drives. The bracket should work with the boot whether flipped or not.
Note: The factory holes are coarse thread M6 (generally short body/plastic panel screws) and I re-tapped them to M6x1.0 because I had a ready supply of those bolts in usable lengths for this bracket. The holes are 7mm in diameter for some wiggle room.
Update 6/30/25: I finally slapped the center console over this piece, and found that it was too thick to allow the shifter cover to snap into place. I've reduced the thickness from 15 mm to 7.5 mm.
I used:
PETG
25% infill
gyroid
~34 grams" https://3dcarparts.org/library/1984/Nissan/300ZX/shift-boot-retaining-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/bd787af0-cc66-49e9-ba6e-511d1bb360a7/images/shift-boot-retaining-bracket-1_1777851796302_hrhou0.jpg in_stock 17.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/shift-boot-retaining-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-10b235bc-1610-4d71-a0e6-ba4fb589ff3d 1987 Nissan 300ZX Headlight Louvers "I couldn't find anywhere to buy headlight louvers for the 87-89 model of the z31 so I decided to try and design my own.
these are based off original kouki louvers, I only had a picture to base them off of so they are far from perfect.
the bracket doesn't sit perfect but where the mounting holes are sit flush with the bumper.
I've done one test drive with them mounted using double side tape and they held with no problem, ill update this as I drive with them more to see if you even need to drill though your bumper to mount them.
the model is only for the drivers side, I just mirrored it in the slicer when I was printing the passenger side. Use m3 heated inserters on the brackets." https://3dcarparts.org/library/1987/Nissan/300ZX/headlight-louvers https://r2-upload.3dcarparts.workers.dev/file/parts/10b235bc-1610-4d71-a0e6-ba4fb589ff3d/images/headlight-louvers-1_1777851787784_70fp7r.jpg in_stock 23.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1987/Nissan/300ZX/headlight-louvers?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fde98515-ec5d-4460-8fd9-8ddca0aeb0c2 1984 Nissan 300ZX Inner Door Handle Slider My inner door handle didnt work in my 300zx and I found the problem was this broken slider so I designed a new one. Works great on my car. (Print solid infill at .15 resolution for best results). https://3dcarparts.org/library/1984/Nissan/300ZX/inner-door-handle-slider https://r2-upload.3dcarparts.workers.dev/file/parts/fde98515-ec5d-4460-8fd9-8ddca0aeb0c2/images/inner-door-handle-slider-1_1777851783875_ed4cca.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/300ZX/inner-door-handle-slider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-14b3fe0a-3912-4d88-b292-dd5851553e42 1984 Nissan 300ZX Fog Light Adjustment Screw Retainer Printed at solid infill works well. https://3dcarparts.org/library/1984/Nissan/300ZX/fog-light-adjustment-screw-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/14b3fe0a-3912-4d88-b292-dd5851553e42/images/fog-light-adjustment-screw-retainer-1_1777851779870_p5nq7k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1984/Nissan/300ZX/fog-light-adjustment-screw-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-be2661b8-db59-4031-afcd-b2e884334186 1990 Nissan 300ZX Trunk Privacy Cover Hook Holder for the privacy cover for 300zx. Mine were broken so I made these. They work decently, I may revise this later. https://3dcarparts.org/library/1990/Nissan/300ZX/trunk-privacy-cover-hook https://r2-upload.3dcarparts.workers.dev/file/parts/be2661b8-db59-4031-afcd-b2e884334186/images/trunk-privacy-cover-hook-1_1777851775829_pepinq.jpg in_stock 8.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/trunk-privacy-cover-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e55708ef-c230-43aa-b3be-b2d2852630f0 2014 MINI Cooper Cup Holder Insert "This is a universal cup holder insert designed specifically for the new F56 MINI.
It is split so that anything can be mounted to it - any phones, cameras... Much stuff. Additionally, the cup holder stays empty and you still can store stuff like cables in it, even the car key still goes in.
Why is it needed?
If you own a MINI, you know: there is not much place to put your phone, and accessories from BMW are pricey plus incompatible with most phone models.
How does it work?
The cup insert is a bit springy and grips into the place for the cup. The upper part is held in place by four M3 bolts with usual or Nylock nuts. The bolts are arranged in a 20x20 mm square, you are free to add any mounts for your needs.
Currently mounts for:
Apple iPhone 6/6s
Apple iPhone 6 Plus
Samsung Galaxy Note 2
are available, I can add more if anyone is interested." https://3dcarparts.org/library/2014/MINI/Cooper/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/e55708ef-c230-43aa-b3be-b2d2852630f0/images/cup-holder-insert-1_1777850338340_witbga.jpg in_stock 12.73 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/MINI/Cooper/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f312eb4e-4429-409c-abc2-e1d41d16d0f0 2014 MINI Cooper D Trunk Cargo Net Clip "The original clip is from a MINI Cooper D 2014, I remodelled it because my friend lost 2 of these. It has perfect fit.
I tried to print with ABS (with enclosure + heated bed) but the side was ugly.
Just tilt it by 25° and it will be strong." https://3dcarparts.org/library/2014/MINI/Cooper%20D/trunk-cargo-net-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f312eb4e-4429-409c-abc2-e1d41d16d0f0/images/trunk-cargo-net-clip-1_1777850332466_1pc6eb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/MINI/Cooper%20D/trunk-cargo-net-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-90898b10-6c68-4816-a4fe-082e9e6a738f 2001 Mini Cooper Boot Catch Cable Opener Pulley "Spare parts for the Mini One / Cooper / Cooper S hatchback between 2001 - 2006.
If you print with ABS, we strongly recommended to use acetone on the tiny pulley to make it stronger." https://3dcarparts.org/library/2001/Mini/Cooper/boot-catch-cable-opener-pulley https://r2-upload.3dcarparts.workers.dev/file/parts/90898b10-6c68-4816-a4fe-082e9e6a738f/images/boot-catch-cable-opener-pulley-1_1777850323737_c6odys.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Mini/Cooper/boot-catch-cable-opener-pulley?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8caabbf2-081a-4101-b3c6-ad0157dcaa3a 2009 Mini Cooper Clubman Rear Door Courtesy Light Housing This is the rear door courtesy light housing for a 2009 Mini Cooper Clubman, It fits under the rear door and should work for either side. This was designed in Imperial units, so if you import it in mm, you will have to scale it by 25.4. https://3dcarparts.org/library/2009/Mini/Cooper%20Clubman/rear-door-courtesy-light-housing https://r2-upload.3dcarparts.workers.dev/file/parts/8caabbf2-081a-4101-b3c6-ad0157dcaa3a/images/rear-door-courtesy-light-housing-1_1777850318883_wutgb3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2009/Mini/Cooper%20Clubman/rear-door-courtesy-light-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-85e839c9-7266-44f8-a53b-d565db73d5a0 2007 Mini Cooper Stereo Storage Pocket I designed this to utilize the empty space where the stereo head unit was when I installed an Android unit. Prints in two parts. Print the faceplate facing up and break off the designed-in supports. Glue the box into the back of the face with your favorite adhesive. Recommend using PETG or ABS as PLA will warp in the heat in your car. https://3dcarparts.org/library/2007/Mini/Cooper/stereo-storage-pocket https://r2-upload.3dcarparts.workers.dev/file/parts/85e839c9-7266-44f8-a53b-d565db73d5a0/images/stereo-storage-pocket-1_1777850300063_p9ohp7.jpg in_stock 21.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/stereo-storage-pocket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13eacd23-c344-4413-af8d-7d48a47309f0 2007 Mini Cooper Shift Knob I searched everywhere for an R56 shift knob, but no one had one. I remixed the adapter into a Mazda knob I already use for a full slip-fit shift knob for my R56 Mini Cooper. This is the first model I have posted and would love some feedback. It's smaller than stock but fits my hand perfectly and works well with the boot delete listed on Thingiverse. https://3dcarparts.org/library/2007/Mini/Cooper/shift-knob https://r2-upload.3dcarparts.workers.dev/file/parts/13eacd23-c344-4413-af8d-7d48a47309f0/images/shift-knob-1_1777850295840_k9rxje.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mini/Cooper/shift-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d4bb9131-cdf9-4995-8d93-1f261d19648d 2005 Ford Mustang Seat Back Release Lever "This is a seat back release lever for a 2005 mustang, I think it will fit a 2006 as well, similar to a MPN# 6362762AAC.
I made this for my gf car and it kept sliding off, I added a little notch on the inner wall to catch the hole in the lever this mounts on." https://3dcarparts.org/library/2005/Ford/Mustang/seat-back-release-lever https://r2-upload.3dcarparts.workers.dev/file/parts/d4bb9131-cdf9-4995-8d93-1f261d19648d/images/seat-back-release-lever-1_1777850213807_1oeesl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/seat-back-release-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-93aca208-29d5-4d24-aa95-f36fafa8bbff 1979 Ford Mustang Cup Holder "i added the second design with the slot between the cups but i have not tested it just FYI
cupholder for foxbody console i designed, will require trimming the factory console ashtray door and surrounding area a little. i just used a dremel. epoxy this in place and use whatever means you find fit to fill in gaps (fiberglass, bondo, filler, epoxy)
i would recommend using abs because im not sure PLA would hold up to the heat inside the car in the summer." https://3dcarparts.org/library/1979/Ford/Mustang/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/93aca208-29d5-4d24-aa95-f36fafa8bbff/images/cup-holder-1_1777850209284_hz1vne.jpg in_stock 26.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Ford/Mustang/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2aebba4e-38b8-4669-9c3f-0470754463da 2005 Ford Mustang Headlight Switch Spring Clip This can replace the spring clip in the light control panel for the S197 (2005-2009) Ford Mustang. https://3dcarparts.org/library/2005/Ford/Mustang/headlight-switch-spring-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2aebba4e-38b8-4669-9c3f-0470754463da/images/headlight-switch-spring-clip-1_1777850205303_pga9r2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2005/Ford/Mustang/headlight-switch-spring-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-84e2f82d-ae75-4d8c-aa9b-ce5ff35789c5 1968 Ford Mustang Windshield Washer Hose Tee Simple tee based on original style hose tee for 1968 Ford Mustang https://3dcarparts.org/library/1968/Ford/Mustang/windshield-washer-hose-tee https://r2-upload.3dcarparts.workers.dev/file/parts/84e2f82d-ae75-4d8c-aa9b-ce5ff35789c5/images/windshield-washer-hose-tee-1_1777850201943_aockd9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1968/Ford/Mustang/windshield-washer-hose-tee?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-75428fdc-f053-47ad-9bf7-c92734864a63 1967 Ford Mustang Firewall A/C Hole Plug "This is a plug for the oval A/C hole in the firewall on early model Mustangs. I made it for a '67 coupe, but it looks like it should work on earlier years also.
PLA was too rigid, but [Nylon-230](https://www.amazon.com/Taulman-Nylon-230-Printing-Filament/dp/B00WTNL2KI) worked well." https://3dcarparts.org/library/1967/Ford/Mustang/firewall-ac-hole-plug https://r2-upload.3dcarparts.workers.dev/file/parts/75428fdc-f053-47ad-9bf7-c92734864a63/images/firewall-ac-hole-plug-1_1777850195825_nuf9oc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/1967/Ford/Mustang/firewall-ac-hole-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ffe182a3-02ea-48e5-84fc-ef37a4e6b229 1990 Nissan 300ZX Blend Door Actuator Gear Set "This is a set of gears intended for use to replace the broken gears in a 300ZX blend door actuator. This includes all the gears in the geartrain except the worm on the motor, which I could not extract to model.
Shown in the pictures is a small puller I had to make to remove the actuator arm intact.
Given the forces this is subject to, I would not recommend printing these in anything short of ABS or Nylon, at 100% infill. I printed in Taulman 910.
They are based on the Parametric Involute Bevel and Spur Gear library by GregFrost. As such, it is licensed under the Creative Commons - GNU LGPL 2.1 license. The source code is included in the thing, in the .scad file." https://3dcarparts.org/library/1990/Nissan/300ZX/blend-door-actuator-gear-set https://r2-upload.3dcarparts.workers.dev/file/parts/ffe182a3-02ea-48e5-84fc-ef37a4e6b229/images/blend-door-actuator-gear-set-1_1777849995906_bmk0we.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/blend-door-actuator-gear-set?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c31af41b-b9bd-46d9-b206-be07de71239f 1984 Nissan 300ZX Hatch Latch Bracket Repair Stamp "This is a stamp for making a repair patch piece for the hatch latch bracket on a Z31 300ZX. This part and the sheet metal it attaches to are often rusted away, and replacements for these parts can be hard to find. Use these stamping molds and the the template for the sheet metal, and you can stamp out a good start to a patch.
Some additional hammer and dolly work and fine tuning for the fit will be required to get it just right, and the flange will need to be bent to 90 degrees prior to install as well (I only limited it to 45 degrees for ease of bending here, breaking the line is the hardest part!
I used 20ga sheet steel for this part, and a large vice to apply clamping pressure to make the part. A hydraulic press would be more ideal." https://3dcarparts.org/library/1984/Nissan/300ZX/hatch-latch-bracket-repair-stamp https://r2-upload.3dcarparts.workers.dev/file/parts/c31af41b-b9bd-46d9-b206-be07de71239f/images/hatch-latch-bracket-repair-stamp-1_1777849990422_g2ouu3.jpg in_stock 22.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1984/Nissan/300ZX/hatch-latch-bracket-repair-stamp?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-17107e43-eba4-4cb2-b1a8-20c0d890f68b 1993 BMW 3 Series Oil Filter Wrench "Oil filter wrench for BMW E36 or E46 with M43 engine.
wrench size: 86mm" https://3dcarparts.org/library/1993/BMW/3%20Series/oil-filter-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/17107e43-eba4-4cb2-b1a8-20c0d890f68b/images/oil-filter-wrench-1_1777849987411_s8pb0f.jpg in_stock 19.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1993/BMW/3%20Series/oil-filter-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6bf0454e-0cc2-4023-a809-939ffd8df36d 1998 BMW 3 Series Dash Trim Clip "BMW E46 dash trim mounting clip. Part number: 51458266814 - Insert Rot.
Please use higher temperature filaments." https://3dcarparts.org/library/1998/BMW/3%20Series/dash-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/6bf0454e-0cc2-4023-a809-939ffd8df36d/images/dash-trim-clip-1_1777849984107_fwitem.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/dash-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a4bcf8a9-c63d-4f2a-854f-90f8ce0515ef 2001 Mini Cooper Five Spoke Wheel Center Cap Snap in center cap for factory 16 inch, 5 spoke wheel. We noticed that two out of the four wheels needed the Ø59mm center cap and the other two needed a Ø57mm. We wanted the reveal on the outside the same, so we had to have two different sizes to get the same look. The front wheel pic shows the Ø57mm center cap installed and the rear shows the Ø59mm. I've included the Ø58mm model too. https://3dcarparts.org/library/2001/Mini/Cooper/five-spoke-wheel-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/a4bcf8a9-c63d-4f2a-854f-90f8ce0515ef/images/five-spoke-wheel-center-cap-1_1777849880551_zf1vac.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Mini/Cooper/five-spoke-wheel-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c47a4f3b-7410-41dd-8a1d-440063fa6323 2002 Mini Cooper Shift Boot Retainer "So from the file made by ""https://www.thingiverse.com/ksaiyo"" I just made it a bit smaller side to side and a bit higer.
Also added longer points, one of which is a bit longer and wider, which has its own spot, which is different to the other 3.
Hope this helps.
Worked for me
I named file V7, as i did just 2 big changes.
Used tinkercad, still figuring out Fusion" https://3dcarparts.org/library/2002/Mini/Cooper/shift-boot-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/c47a4f3b-7410-41dd-8a1d-440063fa6323/images/shift-boot-retainer-1_1777849876785_35z4em.jpg in_stock 9.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Mini/Cooper/shift-boot-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-29482cba-5116-4622-9214-59eb6eaef7f3 2007 Mini Cooper S Center Cap 2007 Mini Cooper S center cap https://3dcarparts.org/library/2007/Mini/Cooper%20S/center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/29482cba-5116-4622-9214-59eb6eaef7f3/images/center-cap-1_1777849871093_0wj9q3.jpg in_stock 29.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Mini/Cooper%20S/center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d06b936a-9917-4fb0-9db7-79e6e205a254 1969 Ford Mustang Rim Blow Steering Wheel Insulator "This is a replacement 1969 Ford Mustang Rim Blow Steering Wheel Insulator. It is a near exact duplicate of the original, which tends to shrink and crack over time.
There are 2 files available. An original reproduction and an improved (Thicker & Taller) model. Either will work, but the improved model just seems to fit better and should be less prone to breaking. Neither model includes the notches in the bottom of the ring, because I didn't actually see the use of those, except maybe it made it easier during assembly. In the few rings that I've seen, they always seem to crack right at the notch, where the height is narrower.
Not sure the settings matter much, but here's what I used:
0.1mm Profile
0.8 Wall Thickness
2 Wall Line Count
100 Infill
No supports needed
No Plate Adhesion needed" https://3dcarparts.org/library/1969/Ford/Mustang/rim-blow-steering-wheel-insulator https://r2-upload.3dcarparts.workers.dev/file/parts/d06b936a-9917-4fb0-9db7-79e6e205a254/images/rim-blow-steering-wheel-insulator-1_1777849788738_rh4zex.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1969/Ford/Mustang/rim-blow-steering-wheel-insulator?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dd903d17-55e1-4a10-9f83-91392a16c797 1969 Ford Mustang Mini ATX Fuse Adapter "Designed for my 69 Mustang but i have found this will fit multiple models such as a 69 Cougar or 71 Torino
Fuse holder/adapter based off https://www.thingiverse.com/thing:1893269
Mini ATX Adapter for our 69 Mustang buss fuse panels.
This requires cutting the brass bar into sections, beveling out the edge, and soldering connectors to it
1) - ACC Type - For adding the Accessory wire where a fuse isn't present
2) - FULL - Where the fuse is present and has the screw connector
3) - ACC-Bolt - Allows you to add a small bolt to connect to the ACC Accessory instead of using a wire lead
Configuration Types:
1) - Bolt-On Requires removal of the unit and to put the bolt through. Does eliminate the ability to use the push on washer that holds it to the Wiring harness. Only matters for removal really
2) - Push-ON....The center hole will push around the bolt and is held in by the bus fuse holders.
Contacts:
http://www.digikey.com/product-detail/en/keystone-electronics/3557/36-3557-ND/2092485
Brass Bar:
https://www.amazon.com/gp/product/B0748DQ1MP" https://3dcarparts.org/library/1969/Ford/Mustang/mini-atx-fuse-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/dd903d17-55e1-4a10-9f83-91392a16c797/images/mini-atx-fuse-adapter-1_1777849776594_keb7q2.jpg in_stock 10.24 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1969/Ford/Mustang/mini-atx-fuse-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3b09fada-0027-4506-9de9-1fcc99e653f7 2015 Ford Mustang Cupholder Armrest S550 Mustang Cupholder armrest, i upholstered mine and printed in asa. I have a tough time printing this thats why the layer height is so high. https://3dcarparts.org/library/2015/Ford/Mustang/cupholder-armrest https://r2-upload.3dcarparts.workers.dev/file/parts/3b09fada-0027-4506-9de9-1fcc99e653f7/images/cupholder-armrest-1_1777849772906_k5rfti.jpg in_stock 25.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Ford/Mustang/cupholder-armrest?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2b0e6918-7eaf-4070-b21a-e3c8d48b9ba3 2015 Ford F-150 Bed Rail Cap Design a cap to fit F150 2015-2020 bed rail. https://3dcarparts.org/library/2015/Ford/F-150/bed-rail-cap https://r2-upload.3dcarparts.workers.dev/file/parts/2b0e6918-7eaf-4070-b21a-e3c8d48b9ba3/images/bed-rail-cap-1_1777849683167_65n2ho.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2015/Ford/F-150/bed-rail-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ac5e0f55-a22f-4f52-a89a-4827d45b7dd9 2010 Ford F-150 Cup Holder Insert "Do you have a 2010-2014 Ford F150 XLT and hate the size of the cup holders like I do? Well, now you can use these 2 adapters to help keep cans and water bottles from rocking back and forth while driving around town.
I have not printed these with a rigid filament yet. They were designed to be printed with a flexible filament like Sainsmart Flexible TPU or Ninja Flex) and 0 infill." https://3dcarparts.org/library/2010/Ford/F-150/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/ac5e0f55-a22f-4f52-a89a-4827d45b7dd9/images/cup-holder-insert-1_1777849673794_6hlf81.jpg in_stock 20.12 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Ford/F-150/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c978a3aa-9ead-481c-9dd9-c57ca65c1336 2000 Chevrolet Corvette Radio Knob Collection This is a collection of knobs for the stock AC Delco CD player in a 2000 Chevy Corvette. Not sure if it will work on other makes/models/years. https://3dcarparts.org/library/2000/Chevrolet/Corvette/radio-knob-collection https://r2-upload.3dcarparts.workers.dev/file/parts/c978a3aa-9ead-481c-9dd9-c57ca65c1336/images/radio-knob-collection-1_1777849666439_46sy2p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Chevrolet/Corvette/radio-knob-collection?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-51a1aa37-dcad-4880-a964-acb9b0759f94 2005 Ford Mustang Center Console Panel Cover with USB Socket Mount "A replacement for factory ""blank"" cover mount in center console storage compartment in a 2005 Ford Mustang. It was created to hold USB socket for a new car stereo install.
""Panel Cover for USB socket mount in 2005 Ford Mustang"" on [GitHub](https://github.com/idcrook/3dprintering/tree/master/designs/USB_panel_mount_2005_Mustang_center_console)
## Reference
- [USB mount cable](https://www.amazon.com/gp/product/B0773GKM2C/) bought on Amazon ""LDKCOK USB 3.0 Mount Cable –USB Extension Flush, Dash, Panel Mount Cable, for Car, Boat, Motorcycle and More (6ft/2m)""
- Ford part number that it's substitute for: ""Ford Mustang Center Console Secondary Outlet Cover"" [4R33-6304752-AB](https://www.google.com/search?q=4R33-6304752-AB&oq=4R33-6304752-AB)" https://3dcarparts.org/library/2005/Ford/Mustang/center-console-panel-cover-with-usb-socket-mount https://r2-upload.3dcarparts.workers.dev/file/parts/51a1aa37-dcad-4880-a964-acb9b0759f94/images/center-console-panel-cover-with-usb-socket-mount-1_1777849658421_zbkevm.jpg in_stock 7.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/center-console-panel-cover-with-usb-socket-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40fa1ef0-8fd2-416e-9351-e96ad1a2c9b9 2015 Ford C-Max / Focus Upper Trunk Buffer Ford upper trunk buffer (hatchback C-Max, Focus ~2015), print with TPU: 0,2mm, 2 walls, 20 % infill, gyroid. https://3dcarparts.org/library/2015/Ford/C-Max%20%2F%20Focus/upper-trunk-buffer https://r2-upload.3dcarparts.workers.dev/file/parts/40fa1ef0-8fd2-416e-9351-e96ad1a2c9b9/images/upper-trunk-buffer-1_1777849578119_qeb0i1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2015/Ford/C-Max%20%2F%20Focus/upper-trunk-buffer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1d2f1b00-0188-4b77-a269-5abe4b8774b7 2003 Toyota 4Runner Center Console Switch Guard Switch guard for OEM sized push buttons in the center console on '03-'09 Toyota 4Runners. Designed to be fastened with M4 socket cap screws. https://3dcarparts.org/library/2003/Toyota/4Runner/center-console-switch-guard https://r2-upload.3dcarparts.workers.dev/file/parts/1d2f1b00-0188-4b77-a269-5abe4b8774b7/images/center-console-switch-guard-1_1777849573665_fy8aw5.jpg in_stock 10.33 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Toyota/4Runner/center-console-switch-guard?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3e3d293f-93a7-4493-a3e4-9324b1fc713a 2000 Toyota 4Runner Grille Clip "I made some grill clips for my 2000 Toyota 4 runner, they work grate clip on smoothly.
I used matter hacker black pla and used prusa slicer for gcode
my config is in the file I provided, just hover over file then press import and find the config file you downloaded.
P.S. I used 100% infill" https://3dcarparts.org/library/2000/Toyota/4Runner/grille-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3e3d293f-93a7-4493-a3e4-9324b1fc713a/images/grille-clip-1_1777849569979_sql0nj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Toyota/4Runner/grille-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eebca465-c30b-4dd3-8693-be570ea33b9e 2022 Toyota Tundra Headrest RAM Mount I needed a way to mount an iPad in the back seat of my Tundra for my son. This slips over the rails for the rear headrest and has a 1 inch RAM ball to attach whatever you'd like. I printed in PETG in hopes that it will hold up in the summer heat, and I bumped the infill up to about 80%. Hope someone else finds it useful! https://3dcarparts.org/library/2022/Toyota/Tundra/headrest-ram-mount https://r2-upload.3dcarparts.workers.dev/file/parts/eebca465-c30b-4dd3-8693-be570ea33b9e/images/headrest-ram-mount-1_1777849566155_o9gu77.jpg in_stock 16.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Toyota/Tundra/headrest-ram-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eb456421-a5bd-4703-b0e3-63e8b94f3634 2001 MINI Cooper Glovebox Handle "A replacement handle for the glovebox in the MINI R50/R52/R53 which tends to break.
You need to break open the glovebox door so that you can remove the existing handle and it's springs." https://3dcarparts.org/library/2001/MINI/Cooper/glovebox-handle https://r2-upload.3dcarparts.workers.dev/file/parts/eb456421-a5bd-4703-b0e3-63e8b94f3634/images/glovebox-handle-1_1777849464673_6n1wbc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/MINI/Cooper/glovebox-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dced1676-bbeb-4291-bbf6-631cadaddc53 2001 Mini Cooper Tweeter Speaker Adapter "I have made an adapter for Mini Cooper tweeter speakers. My Mini Cooper is called R50 R53. The speakers I use come from Biltema in Sweden.
I'll post the files for Fusion 360 if anyone wants to adapt to their own.
I have also made a file for the 6,5"" speakers.
https://www.thingiverse.com/thing:6025373" https://3dcarparts.org/library/2001/Mini/Cooper/tweeter-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/dced1676-bbeb-4291-bbf6-631cadaddc53/images/tweeter-speaker-adapter-1_1777849455689_up6vlo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper/tweeter-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-434763ec-6b0e-45b2-8bed-a42df9f2b50a 2001 Mini One / Cooper Speaker Adapter 165mm "NOTE:
I HAVEN'T TESTED THE PIECE YET, I'M WAITING FOR THE NEW SPEAKERS TO ARRIVE.
ONCE I HAVE TESTED EVERYTHING, I WILL UPDATE THE DESCRIPTION (OR THE MODEL).
I added some chamfers and fillets to strengthen the structure, especially during the printing phase.
Based on other models I found online, I also slightly lowered the height of the piece." https://3dcarparts.org/library/2001/Mini/One%20%2F%20Cooper/speaker-adapter-165mm https://r2-upload.3dcarparts.workers.dev/file/parts/434763ec-6b0e-45b2-8bed-a42df9f2b50a/images/speaker-adapter-165mm-1_1777849452040_evp0g5.jpg in_stock 21.39 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/One%20%2F%20Cooper/speaker-adapter-165mm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-24fbffb1-a489-4b97-92ce-821c3ae51ae1 2001 Mini Cooper Front Tweeter Adapter I modified this adapter to fit the tweeter from the Hertz K165 component set. https://3dcarparts.org/library/2001/Mini/Cooper/front-tweeter-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/24fbffb1-a489-4b97-92ce-821c3ae51ae1/images/front-tweeter-adapter-1_1777849447146_xqyjk7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Mini/Cooper/front-tweeter-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-857e4a9f-aed0-4df9-80bf-640773e380d3 2006 Mini Cooper Weather Strip End Caps "End Caps for R56 Mini cooper weather strip that runs around the bottom of all the windows,
these parts are only available to buy second hand from eBay and without them the car becomes a sharp object that annoyingly rips holes in your sleeves as you climb out the car.
I fixed this issue by designing these left and right versions that will fit the entire weather strip of the car.
Enjoy.." https://3dcarparts.org/library/2006/Mini/Cooper/weather-strip-end-caps https://r2-upload.3dcarparts.workers.dev/file/parts/857e4a9f-aed0-4df9-80bf-640773e380d3/images/weather-strip-end-caps-1_1777849440912_gx9cx3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Mini/Cooper/weather-strip-end-caps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5973ffa2-780e-4bfd-ba8d-606bd7808bfc 2002 Mini Cooper Speaker Adaptor This is a speaker adaptor to convert the existing hole position and placement of the BMW Mini R53 speakers to after market 16.5 cm speakers. Simply print two of these and screw your speakers into them, them mount in the existing speaker locations. https://3dcarparts.org/library/2002/Mini/Cooper/speaker-adaptor https://r2-upload.3dcarparts.workers.dev/file/parts/5973ffa2-780e-4bfd-ba8d-606bd7808bfc/images/speaker-adaptor-1_1777849436978_evjja3.jpg in_stock 26.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Mini/Cooper/speaker-adaptor?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-52bf32d1-e774-4608-9a22-6025f110a3d6 2005 Ford Mustang Cup Holder Insert "My old OEM cup holder has seen better days. To replace would cost $21 from Ford. I don't think so. Print and Enjoy
Video oh how it works
http://youtu.be/8p9r7u_sXjg" https://3dcarparts.org/library/2005/Ford/Mustang/cup-holder-insert-2 https://r2-upload.3dcarparts.workers.dev/file/parts/52bf32d1-e774-4608-9a22-6025f110a3d6/images/cup-holder-insert-2-1_1777849354568_y6hbhd.jpg in_stock 15.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/cup-holder-insert-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2e72e8dc-4120-4648-ac09-88f32956a856 2005 Ford Mustang Battery Spacer "I needed to replace the battery in my 2013 Mustang GT, and the new battery was slightly wider than the original. I designed new spacers to gain an extra 2mm of clearance above the tray.
The original spacer measures 32mm, and I have also provided models for spacers measuring 31mm and 30mm." https://3dcarparts.org/library/2005/Ford/Mustang/battery-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/2e72e8dc-4120-4648-ac09-88f32956a856/images/battery-spacer-1_1777849348232_u731c0.jpg in_stock 26.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2005/Ford/Mustang/battery-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5caa5433-9e9d-4a70-9323-c076ba4a2688 2005 Ford Mustang Center Console Access Port Cover Plate Needed a new panel to cover the access port inside the center console of my 2007 mustang. hope this helps someone! https://3dcarparts.org/library/2005/Ford/Mustang/center-console-access-port-cover-plate https://r2-upload.3dcarparts.workers.dev/file/parts/5caa5433-9e9d-4a70-9323-c076ba4a2688/images/center-console-access-port-cover-plate-1_1777849344828_jfdd8h.jpg in_stock 9.68 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/center-console-access-port-cover-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f7d0645-9f29-44d9-9be0-9da5e07dd36d 1990 Ford Mustang Hood Prop Retaining Clip "Had to shave off a little of the original design to fit on my 1990 Ford Mustang GT Vert as my hood prop retainer mounting location is 7.6mm wide and the print came out at around 7.9. Total print height came out at 12.6mm which is what the slicer said it should be so think my car just might be a little different for the mounting location size.
This version is a pretty snug fit on mine, I also added the angles to help with the initial guiding in since it's a pretty tight fit still near the end.
---
# Tinkercad
This is a remix of https://www.thingiverse.com/thing:2750733 done via Tinkercad.
**Link:**
https://www.tinkercad.com/things/jUJ8eBhWTOH-1990-ford-mustang-hood-prop-retainer
**Notes:**
The objects have been left ungrouped so you can reposition if needed for additional clearance." https://3dcarparts.org/library/1990/Ford/Mustang/hood-prop-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8f7d0645-9f29-44d9-9be0-9da5e07dd36d/images/hood-prop-retaining-clip-1_1777849341122_r5c2l3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Ford/Mustang/hood-prop-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eee727ba-f24e-444f-b272-5d038c6efc63 1982 BMW 3 Series Gauge Vent This replaces any of the center vents for an BMW E30 and will fit a 52mm gauge. https://3dcarparts.org/library/1982/BMW/3%20Series/gauge-vent-2 https://r2-upload.3dcarparts.workers.dev/file/parts/eee727ba-f24e-444f-b272-5d038c6efc63/images/gauge-vent-2-1_1777849337475_48vu9w.jpg in_stock 16.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/gauge-vent-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dbc85dcf-5aee-4d49-b5dc-51c2750259a5 1982 BMW 3 Series Gauge Vent This replaces any of the small vents on the sides for an BMW E30 and will fit a 52mm gauge. https://3dcarparts.org/library/1982/BMW/3%20Series/gauge-vent https://r2-upload.3dcarparts.workers.dev/file/parts/dbc85dcf-5aee-4d49-b5dc-51c2750259a5/images/gauge-vent-1_1777849333597_ccbyub.jpg in_stock 13.74 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1982/BMW/3%20Series/gauge-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-11bf4509-9be1-41d6-8028-ff6a300b5ccd 1998 BMW 3 Series Cup Holder Cupholder to fit the center console on an E46 BMW. https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/11bf4509-9be1-41d6-8028-ff6a300b5ccd/images/cup-holder-1_1777849328524_mprmjq.jpg in_stock 37.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-04fcfe1a-696e-4b03-9441-84a5522a669b 1988 BMW 5 Series Cup Holder Copy of original cupholder for BMW e34. https://3dcarparts.org/library/1988/BMW/5%20Series/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/04fcfe1a-696e-4b03-9441-84a5522a669b/images/cup-holder-1_1777849313963_6pc9p3.jpg in_stock 29.81 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1988/BMW/5%20Series/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b321e77f-4a06-49d4-ab00-6aad94b1a234 1990 BMW 3 Series Cup Holder "Work In Progress - Subject to Change
I've made a couple of changes after a test fit, adjusted the fixing holes, trimmed out the front.
Designed as a direct replacement for the centre ashtray located beside the parking brake.
Just remove the internal section of the ashtray and undo the two plastic screws. Retain these two fixings for the cup holder.
Printed upside down in PLA.
I will see how the PLA stands up to the summer car temperatures and may reprint in PETG" https://3dcarparts.org/library/1990/BMW/3%20Series/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/b321e77f-4a06-49d4-ab00-6aad94b1a234/images/cup-holder-1_1777849127596_cqy35c.jpg in_stock 30.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/BMW/3%20Series/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6f8a8654-302b-4336-851b-c0375cee99bf 1995 BMW 5 Series Central Console Sliding Cover "BMW E39 - Sliding cover for the central console storing partition of the BMW E39 Model.
Suitable with part number oem 51168210674
Print without support to allow flexibility" https://3dcarparts.org/library/1995/BMW/5%20Series/central-console-sliding-cover https://r2-upload.3dcarparts.workers.dev/file/parts/6f8a8654-302b-4336-851b-c0375cee99bf/images/central-console-sliding-cover-1_1777849120030_c7nwrr.jpg in_stock 11.46 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/BMW/5%20Series/central-console-sliding-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f64d49df-6996-4009-b486-fe44108317a1 2014 BMW i3 Cup Holder "**Updated
New design that has a height more equivalent to the OEM cup holder. It is also quite a bit less material (Almost an hour less printing for me). I also changed how the bottom and top interlock. It is meant to be tapped for 8-32 screws now. There is also a tab that is meant to be glued for more strength as well. (I still need to buy these screws so its not fully tested yet, but I'm confident it is a better design.
Printed with 3 perimeters and an infill of 20% for the bottom and 25% for the top." https://3dcarparts.org/library/2014/BMW/i3/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/f64d49df-6996-4009-b486-fe44108317a1/images/cup-holder-1_1777849114498_atms7s.jpg in_stock 18.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/BMW/i3/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-daadd3ce-c08b-43db-9bdf-da21087fae94 2008 BMW 3 Series Wireless Charger Ashtray Replacement "I designed this to replace the ashtray in my 2008 e92, but this should work for any BMW e9X model. This design will hold a Samsung Galaxy S21 with a case measuring 80mm wide. I printed in black ASA at .20mm with Supports. It is best to reorientate flat before printing.
I have attached the Fusion360 file if you want to attempt to change the size, but it may be best to just use the file as a guide.
Below is the Inbay Wireless Charging Kit that was used.
https://www.ecstuning.com/b-inbay-parts/wireless-charging-retrofit-kit-3-coil/240000-03~iby/?gclid=CjwKCAiA3L6PBhBvEiwAINlJ9Azw-8ybrMDp4lYes29nIvGrPaZN64pQCU_94IeViUUytapodKJ8lxoCFVcQAvD_BwE" https://3dcarparts.org/library/2008/BMW/3%20Series/wireless-charger-ashtray-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/daadd3ce-c08b-43db-9bdf-da21087fae94/images/wireless-charger-ashtray-replacement-1_1777849109964_3kefi1.jpg in_stock 28.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/BMW/3%20Series/wireless-charger-ashtray-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-09599092-6fe0-4c28-a50e-a98a3a6f1d8c 1990 BMW 3 Series Luggage Tray Spare Tire Support Pad "// model: BMW Luggage Tray Spare Tire Support Pad (BMW Part No. 51471930956 (28mm), 51471960706 (19.5mm)
// author: fiveangle@gmail.com
// date: 2015jun10
// ver: 1.0.0
// notes: default parameters create BMW Part No. 51471930956 (28mm), customizer options for BMW Part No. 51471960706 (19.5mm)
// history:
// -1.0.0 - Released
https://youtu.be/Iw0y6KxKLKE" https://3dcarparts.org/library/1990/BMW/3%20Series/luggage-tray-spare-tire-support-pad https://r2-upload.3dcarparts.workers.dev/file/parts/09599092-6fe0-4c28-a50e-a98a3a6f1d8c/images/luggage-tray-spare-tire-support-pad-1_1777849041161_fadnkq.jpg in_stock 16.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/BMW/3%20Series/luggage-tray-spare-tire-support-pad?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ad749cf6-f8ba-476f-82af-a8e91e829fee 1998 BMW 3 Series / X3 Positive Terminal Base Cover "Mine got lost, so I decided to make one! Print in PETG or other heat resistant filament.
BMW (E46 3 Series, E83 X3) Battery Positive Terminal Base B + - Cover Cap (61138371011)" https://3dcarparts.org/library/1998/BMW/3%20Series%20%2F%20X3/positive-terminal-base-cover https://r2-upload.3dcarparts.workers.dev/file/parts/ad749cf6-f8ba-476f-82af-a8e91e829fee/images/positive-terminal-base-cover-1_1777849037737_lrjfy2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1998/BMW/3%20Series%20%2F%20X3/positive-terminal-base-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4fb7791b-950e-4b61-a27a-bc55b685f334 1999 BMW E39 Windshield Washer Reservoir Cap "Modeled after the original cap to print a replacement for a BMW E39 from 1999. Print in heat resistant filament like ABS or PETG.
Fits E30, E39, Z4, and other models." https://3dcarparts.org/library/1999/BMW/E39/windshield-washer-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/4fb7791b-950e-4b61-a27a-bc55b685f334/images/windshield-washer-reservoir-cap-1_1777849033822_n5rycm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/1999/BMW/E39/windshield-washer-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0ec29d14-98a9-49bf-9655-6f46a5d53647 1990 BMW 3 Series Fog Light Air Vent "Air vent for BMW E36. It replace the fog light. May be used for brake cooling or for forcing cold air to filter.
I designed this to mount it with self tapping screws or drill hole and use zip ties.
If you want pair of them, simply mirror model on your slicer." https://3dcarparts.org/library/1990/BMW/3%20Series/fog-light-air-vent https://r2-upload.3dcarparts.workers.dev/file/parts/0ec29d14-98a9-49bf-9655-6f46a5d53647/images/fog-light-air-vent-1_1777843684751_0g8bww.jpg in_stock 25.15 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories cooling-system https://3dcarparts.org/library/1990/BMW/3%20Series/fog-light-air-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-11b38aeb-81fb-4ecc-b084-7fe24f54382c 1998 Ford Focus Lumbar Support Handle "This is the handle that goes in the arm rest of the drivers seat, it couples the knob to the mechanism inside the seat. In my car it was broken so I had to 3D print a new and better one. Tried and tested. I have it in the car since the beginning of 2020. You can see in the photos prototypes out of PLA.
Printing:
Use ABS. Infill should be at least 20% fast honeycomb, but rectilinear works as well. I used black ABS, but the color doesn't matter.
Social media links:
https://www.instagram.com/n33sworkshop/
https://www.youtube.com/c/N33sWorkshop
You can leave a tip to support my work. Thanks" https://3dcarparts.org/library/1998/Ford/Focus/lumbar-support-handle https://r2-upload.3dcarparts.workers.dev/file/parts/11b38aeb-81fb-4ecc-b084-7fe24f54382c/images/lumbar-support-handle-1_1777843675472_om2gfm.jpg in_stock 11.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Ford/Focus/lumbar-support-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c72b0e0c-0167-4d54-beb7-c0456c43c879 1998 BMW 3 Series Power Steering Quick Connector Hose Removal Tool BMW Power Steeering Quick Connector Hose Removal Tool for E46 Model https://3dcarparts.org/library/1998/BMW/3%20Series/power-steering-quick-connector-hose-removal-tool https://r2-upload.3dcarparts.workers.dev/file/parts/c72b0e0c-0167-4d54-beb7-c0456c43c879/images/power-steering-quick-connector-hose-removal-tool-1_1777840294461_tvtjhc.jpg in_stock 13.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1998/BMW/3%20Series/power-steering-quick-connector-hose-removal-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-46564b6a-f097-4356-acb9-088040b7269d 1989 Toyota 4Runner Spark Plug Wire Separator The wire separators on my 1989 Toyota 4Runner (3VZE) were hopelessly broken and the only options I could find off the shelf didn't have the right mounting options to snap on to the timing cover like the stock ones. https://3dcarparts.org/library/1989/Toyota/4Runner/spark-plug-wire-separator https://r2-upload.3dcarparts.workers.dev/file/parts/46564b6a-f097-4356-acb9-088040b7269d/images/spark-plug-wire-separator-1_1777839157280_9bxpqx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/1989/Toyota/4Runner/spark-plug-wire-separator?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40084d99-7db3-4c22-9625-7bfd5bd6799f 2008 Ford Focus Air Conditioner Vent Direction Adjustment Part This part is the 2008 model Ford Focus MK 2 air conditioning vent adjustment part. The part works like the original part without gaps https://3dcarparts.org/library/2008/Ford/Focus/air-conditioner-vent-direction-adjustment-part https://r2-upload.3dcarparts.workers.dev/file/parts/40084d99-7db3-4c22-9625-7bfd5bd6799f/images/air-conditioner-vent-direction-adjustment-part-1_1777785694438_4ca5fv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Ford/Focus/air-conditioner-vent-direction-adjustment-part?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-66e1b094-682f-4603-97fd-09cb87b5e623 2011 Ford Focus Seat Adjustment Handle The model is in the correct orientation for printing. https://3dcarparts.org/library/2011/Ford/Focus/seat-adjustment-handle https://r2-upload.3dcarparts.workers.dev/file/parts/66e1b094-682f-4603-97fd-09cb87b5e623/images/seat-adjustment-handle-1_1777785690011_hkr4tj.jpg in_stock 17.07 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/seat-adjustment-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-49a8ab34-f76b-4b93-96ce-ca5f7340e27a 2018 Ford Focus Phone Bracket "A click in bracket that mounts in the car without damaging anything. A bit to long to make it hold it self in place.
Mounted a QI charger on mine, but you may prefere a holder that connects to your phone brand to make use of Car play.
Printed mine in PET-G and solid with only perimeters (4 perimeters), hopefully it will also hold for the summer heat." https://3dcarparts.org/library/2018/Ford/Focus/phone-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/49a8ab34-f76b-4b93-96ce-ca5f7340e27a/images/phone-bracket-1_1777785685700_ogk26a.jpg in_stock 15.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Ford/Focus/phone-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-66594238-ca11-4657-87d3-e02a75a04288 2018 Ford Focus Trunk Cover Hook "place it like on the pic (with supports)
i suggest you to print it full without infill (need to be quiet solide)
left and right part (RH - LH)" https://3dcarparts.org/library/2018/Ford/Focus/trunk-cover-hook https://r2-upload.3dcarparts.workers.dev/file/parts/66594238-ca11-4657-87d3-e02a75a04288/images/trunk-cover-hook-1_1777785683441_r45x0d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Ford/Focus/trunk-cover-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-937bbe6e-2728-49f1-99c7-53ea6fa69b97 2011 Ford Edge Cup Holder Mug Extension This design was made for holding a mug and a cell phone in a cup holder. This should work for any car that has a ~2x2 inch cup holder. https://3dcarparts.org/library/2011/Ford/Edge/cup-holder-mug-extension https://r2-upload.3dcarparts.workers.dev/file/parts/937bbe6e-2728-49f1-99c7-53ea6fa69b97/images/cup-holder-mug-extension-1_1777785678808_ef2cd4.jpg in_stock 27.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Edge/cup-holder-mug-extension?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-07023af0-65ca-4c06-80d7-4f3c1b5c1516 2012 Ford Focus Climate Control Knob Grips Rubber grips that slip on over the climate control knobs on 2012 - 2018 Ford Focus cars with automatic climate control. https://3dcarparts.org/library/2012/Ford/Focus/climate-control-knob-grips https://r2-upload.3dcarparts.workers.dev/file/parts/07023af0-65ca-4c06-80d7-4f3c1b5c1516/images/climate-control-knob-grips-1_1777785673465_galbdm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/climate-control-knob-grips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0670fc0b-54a9-4641-bf9a-6a935cbf35b0 1998 Ford Focus Gear Lever Cable Bushing "Small part to fill up the space of a missing gear lever cable bushing for Ford Focus Mk1 Zetec 1.6. It will probably fit a whole more load of car models but that's up to you to research.
Obviously print it with 100% infill as it's a constructive part and it takes only 8 minutes to print.
I used a zip-tie to prevent it from sliding off the gearbox (small chance that it would without it). Officially a metal C clip should be used to be sure that it will never come off unintended.
Outer diameter = 16.125mm, inner diameter = 8.4375mm, height = 12.7mm
I've also uploaded the scad file i've made this stl with, but i didn't spend time on actually making it configurable. The FN parameter is just the smoothness of the objects which has no use to adjust. I only uploaded it for backup purposes. If you download OpenSCAD you can tinker with the code." https://3dcarparts.org/library/1998/Ford/Focus/gear-lever-cable-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/0670fc0b-54a9-4641-bf9a-6a935cbf35b0/images/gear-lever-cable-bushing-1_1777785674306_c3wig9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/1998/Ford/Focus/gear-lever-cable-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1d368ae3-20d8-480c-8555-c5d028a5a742 2005 Ford Focus Oil Filler Cap "I designed this to fit my 2005 Ford Focus, it may work for other ford models.
I would only recommend that this be used as a temporary solution, while you wait for a proper part. I printed it in PETG, but ABS would be even better for dealing with the high temps of the engine.
I only used it for a couple of days but it seemed to hold up pretty well!" https://3dcarparts.org/library/2005/Ford/Focus/oil-filler-cap https://r2-upload.3dcarparts.workers.dev/file/parts/1d368ae3-20d8-480c-8555-c5d028a5a742/images/oil-filler-cap-1_1777785668102_b1oat5.jpg in_stock 17.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2005/Ford/Focus/oil-filler-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-10e5adfb-eec8-4ca1-a26f-c2bf39af54ce 2013 Ford Focus Classic Hood Strut Rubber Pad Hood strut rubber pad replacement for FORD Focus Classic 2013 https://3dcarparts.org/library/2013/Ford/Focus%20Classic/hood-strut-rubber-pad https://r2-upload.3dcarparts.workers.dev/file/parts/10e5adfb-eec8-4ca1-a26f-c2bf39af54ce/images/hood-strut-rubber-pad-1_1777785667823_1p0k1w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Ford/Focus%20Classic/hood-strut-rubber-pad?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a1e9dc64-7d70-4d4d-bd2f-0ea50931dad5 2011 Ford Focus Centre Console Shelf Replacement to OEM centre console shelf. Removed pen holder in original design to support like for like replacement. https://3dcarparts.org/library/2011/Ford/Focus/centre-console-shelf https://r2-upload.3dcarparts.workers.dev/file/parts/a1e9dc64-7d70-4d4d-bd2f-0ea50931dad5/images/centre-console-shelf-1_1777785664113_hgatms.jpg in_stock 19.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/centre-console-shelf?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0e1fbb65-5067-4c17-81ca-527d3b56b267 2007 Ford Focus Climate Control Knob I couldnt get the original one to work and it was coming out in weird sizes. This one should work for you if the original does not. Tight fit, printed on Anycubic Kobra Max 2. https://3dcarparts.org/library/2007/Ford/Focus/climate-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/0e1fbb65-5067-4c17-81ca-527d3b56b267/images/climate-control-knob-1_1777785662148_lv119d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Ford/Focus/climate-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b3d45ee5-b47a-4008-af87-c764b766151f 2008 Ford Fusion Windshield Washer Tank Cap "This is a 3D modeling of my father's car's windshield washer tank cap .
The original one has been damaged due to intense and prolonged use and he asked me to model a new one for him .
Unfortunately I did not have access to a 3D printer so I was not able to print one in order to find any technical issues related to the design .
My dad has a 2008 European Ford Fusion (It is similar to the first generation of Ford Ecosport produced between 2003 and 2012) . The engine is a 1.6 L l4 (gasoline) Duratec 16V (100 Hp) . The engine was also used on Ford Fiesta VI and Ford Focus II ." https://3dcarparts.org/library/2008/Ford/Fusion/windshield-washer-tank-cap https://r2-upload.3dcarparts.workers.dev/file/parts/b3d45ee5-b47a-4008-af87-c764b766151f/images/windshield-washer-tank-cap-1_1777785657780_dxu43a.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2008/Ford/Fusion/windshield-washer-tank-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2a0653b1-48b6-4757-a325-cfc82d221121 1987 Toyota 4Runner Grille Clip For my 1st generation (1987 )Toyota 4Runner, this clip holds the grill to the truck body. These grill clips are very similar to the stock clips. https://3dcarparts.org/library/1987/Toyota/4Runner/grille-clip https://r2-upload.3dcarparts.workers.dev/file/parts/2a0653b1-48b6-4757-a325-cfc82d221121/images/grille-clip-1_1777783070723_p0rxo6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1987/Toyota/4Runner/grille-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-78c34af6-49af-4b84-bd98-c3572037d0a7 2010 Toyota 4Runner Storage Cubby "This is a storage cubby for the worthless space in the dash next to the USB charger. The design is not perfect, so feel free to remix it and share.
I printed this in PLA to prototype it, but I highly recommend you print in PETG or some other heat-resistant filament, so the summer heat does not warp the plastic.
Printed with Hatchbox PLA at 0.20mm and 100% infill." https://3dcarparts.org/library/2010/Toyota/4Runner/storage-cubby https://r2-upload.3dcarparts.workers.dev/file/parts/78c34af6-49af-4b84-bd98-c3572037d0a7/images/storage-cubby-1_1777783062240_duah2s.jpg in_stock 13.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/storage-cubby?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7f55a41f-5710-463f-81b1-993e5774fdc8 1987 Toyota 4Runner Screw Grommet "Plastic grommet (aka nut) for my 1987 Toyota 4Runner. These plastic pieces are used to screw machine screws into sheet metal holes. For example, my 4Runner's side marker light is held to the body metal with three screws and three of these plastic gizmos.
Base is 10mm square. Screw hole is 3.5mm diameter.
https://www.shapeways.com/model/1834583/toyota-plastic-screw-grommet-12-pieces.html" https://3dcarparts.org/library/1987/Toyota/4Runner/screw-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/7f55a41f-5710-463f-81b1-993e5774fdc8/images/screw-grommet-1_1777783065449_fe4f2g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1987/Toyota/4Runner/screw-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7f7fb8fc-f514-4b92-b909-dccfef300d63 2010 Toyota 4Runner Cubby Drawer "Toyota 4runner gen 5 cubby drawer
Uploaded freecad files" https://3dcarparts.org/library/2010/Toyota/4Runner/cubby-drawer https://r2-upload.3dcarparts.workers.dev/file/parts/7f7fb8fc-f514-4b92-b909-dccfef300d63/images/cubby-drawer-1_1777783065351_trx4g1.jpg in_stock 13.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/cubby-drawer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-938cc504-2460-4fd8-b198-315b7933ccb5 2010 Toyota 4Runner Cup Holder Insert Reducer "5th Gen 4runner cup holder reducer
insert to replace the stock one that gets stuck on the bottom of mugs then lost forever.
Made from scratch in freecad.
The small without handle is perfect for contigo mugs.
The large without handle is perfect for big yeti tumblers.
The one with the cutout is also large and allows for a coffee cup handle to fit through it.
Nothing special print wise, no supports needed. enjoy!" https://3dcarparts.org/library/2010/Toyota/4Runner/cup-holder-insert-reducer https://r2-upload.3dcarparts.workers.dev/file/parts/938cc504-2460-4fd8-b198-315b7933ccb5/images/cup-holder-insert-reducer-1_1777783051311_exu7jv.jpg in_stock 24.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/cup-holder-insert-reducer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d149dfde-7977-4cb3-b85b-8cd105eeabb8 1984 Toyota 4Runner B Pillar Trim Clip This is a clip for a B PIllar trim piece for a first-generation Toyota 4Runner, and first-second generation Tacoma/Hilux. https://3dcarparts.org/library/1984/Toyota/4Runner/b-pillar-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/d149dfde-7977-4cb3-b85b-8cd105eeabb8/images/b-pillar-trim-clip-1_1777783044435_uolerd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Toyota/4Runner/b-pillar-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-81d5ef00-58ad-47df-beb6-e1168f463707 2010 Toyota 4Runner Seatback Bag Hooks "Tweaked its dimensions to fit the latest gen 4Runner seats better, and thickened the hooks ends a little. I also changed the transition between the hooks to make it less awkward, stronger, and cleaner printing.
03-16-2021: I added an open hook version where the trash bag hooks are reversed to open away from the seatback. This will make it easier to add and remove the bags." https://3dcarparts.org/library/2010/Toyota/4Runner/seatback-bag-hooks https://r2-upload.3dcarparts.workers.dev/file/parts/81d5ef00-58ad-47df-beb6-e1168f463707/images/seatback-bag-hooks-1_1777783044118_w1pxcj.jpg in_stock 21.68 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/seatback-bag-hooks?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dc3fe52f-aab5-4f5b-910d-da2be7941b09 1995 Toyota Tacoma Center Console 3-Slot Switch Panel This is a 3 slot switch mount that goes in the space where the 4Runner ebrake handle would usually go. This can be used when swapping a 3rd gen 4Runner center console into a 1st gen toyota Tacoma. https://3dcarparts.org/library/1995/Toyota/Tacoma/center-console-3-slot-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/dc3fe52f-aab5-4f5b-910d-da2be7941b09/images/center-console-3-slot-switch-panel-1_1777783034134_uexdnf.jpg in_stock 10.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/Toyota/Tacoma/center-console-3-slot-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e53b8fb3-753e-4ebf-b77c-f5ca2d1d415e 1996 Toyota 4Runner Rocker Switch Panel "A simple replacement single switch panel for a 3rd gen Toyota 4Runner. These are for the switch panels on the left side of the steering column. This fits round rocker switches. The hole is 21.2mm in diameter.
I have now also included a solid rocker switch panel with no hole." https://3dcarparts.org/library/1996/Toyota/4Runner/rocker-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/e53b8fb3-753e-4ebf-b77c-f5ca2d1d415e/images/rocker-switch-panel-1_1777783033659_87smpf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Toyota/4Runner/rocker-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7412731-6b33-4ec4-b4bc-ecda602df3e8 2010 Toyota 4Runner Rear Seat Release Button "This is a replacement Rear Seat Button for 2010-2018 Toyota 4Runners. When the button is pushed, it folds the seat down. It works for both the left and right rear seats, and although it is not perfect, it does the job. I tried to make it as close to the actual thing as I could, but it could use some tweaking (for aesthetic reasons). I've put a link to Toyota's website with the part listed below.
https://goo.gl/JLZ4Z5
EDIT:
Hey guys! Shoutout to Gavin FS on YouTube for making a video about the design. Per his feedback, I've edited the file and removed the indentation on the top of the button to hopefully produce a slightly better-quality print. I've also included the Fusion files in case you want to modify it yourself.
https://www.youtube.com/watch?v=Berek6DNBOE" https://3dcarparts.org/library/2010/Toyota/4Runner/rear-seat-release-button https://r2-upload.3dcarparts.workers.dev/file/parts/f7412731-6b33-4ec4-b4bc-ecda602df3e8/images/rear-seat-release-button-1_1777783029376_wx2cmm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/4Runner/rear-seat-release-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a98a6958-7f62-4ebc-bcbc-ba3e15c9116a 2003 Toyota 4Runner Rear Dashcam Mount "I bought a 2-channel dashcam for my 4runner and I was left feeling that the methods for mounting the rear camera were wanton. as such, I created this attachment for the rear camera that places it very near the glass and exactly in the position where the rear wiper cleans the glass.
I hope other owners of 4th and 5th generation 4runners also get good results.
Given it's made to be left in the car in all conditions, I'd highly recommend PETG or ABS as I fear PLA will melt in the heat.
UPDATE (2/19/2019): I updated the connection points to loosen them up a bit due to them being excessively tight. They now fit much better and can still be tightened down to hold firm." https://3dcarparts.org/library/2003/Toyota/4Runner/rear-dashcam-mount https://r2-upload.3dcarparts.workers.dev/file/parts/a98a6958-7f62-4ebc-bcbc-ba3e15c9116a/images/rear-dashcam-mount-1_1777783028006_be8h5b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2003/Toyota/4Runner/rear-dashcam-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b8fb66ea-cbc6-4125-9d5d-095108aa32df 1984 Toyota Pickup Interior panel Small Toyota panel that goes in 2nd generation Toyota Pickup/4Runner https://3dcarparts.org/library/1984/Toyota/Pickup/interior-panel https://r2-upload.3dcarparts.workers.dev/file/parts/b8fb66ea-cbc6-4125-9d5d-095108aa32df/images/interior-panel-1_1777783024858_j09725.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Toyota/Pickup/interior-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-df4ee0ee-0e68-4362-85a6-f6b617f4d47d 2001 Toyota 4Runner Rear Wiper Guide Mount Guide/Mount for a rear wiper blade on a 2001 Toyota 4runner https://3dcarparts.org/library/2001/Toyota/4Runner/rear-wiper-guide-mount https://r2-upload.3dcarparts.workers.dev/file/parts/df4ee0ee-0e68-4362-85a6-f6b617f4d47d/images/rear-wiper-guide-mount-1_1777783024061_gwmbgj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Toyota/4Runner/rear-wiper-guide-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-88ff227a-eff9-490f-87fb-5e51e836ba5c 2003 Toyota 4Runner Console Tray 4th Gen 4Runner console tray. I could not print this because of my bed size, so print at your own risk. It should fit fine though. designed through Fusion 360. dimensions are 199mm x 152mm x 43mm. https://3dcarparts.org/library/2003/Toyota/4Runner/console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/88ff227a-eff9-490f-87fb-5e51e836ba5c/images/console-tray-1_1777783021420_3fic4w.jpg in_stock 28.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Toyota/4Runner/console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e7c8deb7-ae0e-4a84-bc4c-aea68f19d1a1 2014 Toyota Tundra Dash Phone Holder "Replacement dash pad with phone holder for 2014-2020 Toyota Tundra. Suggest to print with ABS so it won't melt in your truck
Things to tweak if you want...
The phone holder could use some tweaking. It is designed to fit the iPhone 11 Pro Max. If you have a smaller phone you will want to tweak it.
I didn't want Cura to auto generate supports for the whole thing so I added some in there that don't really print that solid and are easy to cut off to fit later with a razor blade.
The entire phone holder could be raised higher and the camera cutout made larger to function as a dash cam. As it is now with the phone's wide angle you still see a bit of the hood/dash in the frame.
The bottom clip inserts are designed to fit extra tight so it won't go flying off when slamming on the brakes. To get them to fit perfect take a razor blade and slice off one side of ridges of each clip insert." https://3dcarparts.org/library/2014/Toyota/Tundra/dash-phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/e7c8deb7-ae0e-4a84-bc4c-aea68f19d1a1/images/dash-phone-holder-1_1777782955580_kyao3q.jpg in_stock 29.69 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Toyota/Tundra/dash-phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-172b386a-4059-4806-930c-343c784a3e47 2001 Toyota Tundra Rear Wing Window Pivot Arms Pivot arms for rear wing windows on 2001 Toyota Tundra. https://3dcarparts.org/library/2001/Toyota/Tundra/rear-wing-window-pivot-arms https://r2-upload.3dcarparts.workers.dev/file/parts/172b386a-4059-4806-930c-343c784a3e47/images/rear-wing-window-pivot-arms-1_1777782931945_fspl19.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Toyota/Tundra/rear-wing-window-pivot-arms?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7da19d8b-cabe-44b5-bb57-a07a229fdfdf 2024 Toyota Tundra Front Cupholder Spacer Divider "This remix improves the fit of the divider by changing some dimensions, for the 2025 Toyota Tundra. Particularly by widening it fore and aft between the “wings” and removing “wedges” that were designed to make it snug but caused fit issues for some.
This divider model should fit 3rd gen Toyota Tundra 1794, Platinum and Capstone, possibly other models, front cup holders. I printed it in TPU, oriented upside down. No supports necessary" https://3dcarparts.org/library/2024/Toyota/Tundra/front-cupholder-spacer-divider https://r2-upload.3dcarparts.workers.dev/file/parts/7da19d8b-cabe-44b5-bb57-a07a229fdfdf/images/front-cupholder-spacer-divider-1_1777782925459_o4pr4y.jpg in_stock 25.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2024/Toyota/Tundra/front-cupholder-spacer-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b981eff2-8220-4651-8ecc-2a9a7e28a41e 2022 Toyota Sequoia Cup Holder Adapter "If you own a 2022-2023 Toyota Sequoia or Tundra, you know the Yeti/Rctic mugs don't fit in the cup holders. The same is true for skinny water bottles, which can fall over when you stop suddenly.
The adapter is for the cup holder in 2022-2023 Toyota Sequoias (Tundras) for mugs, specifically Yeti and Rctic mugs, as well as for skinny water bottles.
One model has both adapters, and the other is just for skinny water bottles." https://3dcarparts.org/library/2022/Toyota/Sequoia/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/b981eff2-8220-4651-8ecc-2a9a7e28a41e/images/cup-holder-adapter-1_1777782920113_5wp00u.jpg in_stock 20.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Toyota/Sequoia/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b91e1053-2fcf-486a-89e7-8b1f28d8e803 2001 Toyota Tundra Spiked Lug Nut Caps "Are your lug nuts getting a bit corroded or rusty? Do you have new ones but want to keep them looking nice? These caps just may be the answer. In my case, the original ones are showing some rust so I decided to design a simple cap to cover them. You could probably put a light film coat of protectant inside to keep yours looking nice as well. I added a spike on top to make them look cool! Obviously, they don't stick out far enough to pose a hazard, but be careful depending on your wheels.
These were designed for a 2001 Toyota Tundra (1st generation) but I'm sure they'll fit many others or you can scale it as you like. Made with TinkerCad.
**NOTE** the default print is a bit too tight. I recommend scaling these up by 1% which is snug enough to stay on but not impossible to remove on my truck. Your mileage may vary-- print a test one first :-)" https://3dcarparts.org/library/2001/Toyota/Tundra/spiked-lug-nut-caps https://r2-upload.3dcarparts.workers.dev/file/parts/b91e1053-2fcf-486a-89e7-8b1f28d8e803/images/spiked-lug-nut-caps-1_1777782919463_9mvhsz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Toyota/Tundra/spiked-lug-nut-caps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-60924e59-4a6e-4b44-8c01-2557186f5959 2022 Toyota Tundra Console Switch Panel For the third-gen Tundra's center console. This is for Carling switches, I will add another version for the Toyota smaller push switches as well. Stay tuned. https://3dcarparts.org/library/2022/Toyota/Tundra/console-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/60924e59-4a6e-4b44-8c01-2557186f5959/images/console-switch-panel-1_1777782919558_som48e.jpg in_stock 10.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Toyota/Tundra/console-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b468fd28-11e9-4f14-9ddf-ac07601efdaa 2012 Toyota Tundra Bed Plug Plug for slotted hole in bed of '12 Toyota Tundra. https://3dcarparts.org/library/2012/Toyota/Tundra/bed-plug https://r2-upload.3dcarparts.workers.dev/file/parts/b468fd28-11e9-4f14-9ddf-ac07601efdaa/images/bed-plug-1_1777782909131_e2kul3.jpg in_stock 7.65 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Toyota/Tundra/bed-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-847d47df-b0d2-4214-bce3-826ac789b3a0 2024 Toyota Tundra Center Console Organizer This is a crude organizer for my 2024 Toyota Tundra. I would recommend using supports for the curved ledge. The top compartment fits where the removable plastic container used to be. https://3dcarparts.org/library/2024/Toyota/Tundra/center-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/847d47df-b0d2-4214-bce3-826ac789b3a0/images/center-console-organizer-1_1777782906998_vsyarh.jpg in_stock 31.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2024/Toyota/Tundra/center-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-703916d1-42b0-4681-9398-5ec80c8e2d4a 2017 Toyota Tundra Overhead Console Panel "I wanted to replace the map holder in the overhead console of a 2017 Toyota Tundra with a panel containing switches. This is not the completed panel, but a blank to be used as a starting point for any replacement panel. There is some additional structure behind the factory panel, so there is a recess in the back of the panel for clearance.
Note that the tabs on this panel are fairly thin, so care should be taken during cleanup and installation. Also note that two of the tabs are fixed, which should be the first tabs inserted during installation. I did not radius the outward facing edges, as it is easier to sand the corners than to radius those edges in the model.
As this is not the finished project, I printed this at medium quality and did not do any finish work on the print in the pictures. The print for the final project would be sanded smooth and painted to match the overhead console." https://3dcarparts.org/library/2017/Toyota/Tundra/overhead-console-panel https://r2-upload.3dcarparts.workers.dev/file/parts/703916d1-42b0-4681-9398-5ec80c8e2d4a/images/overhead-console-panel-1_1777782903362_8o6r72.jpg in_stock 28.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Toyota/Tundra/overhead-console-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8521bf6b-6fea-4d07-aea3-8a78880fe70f 2007 Toyota Tundra Dash Retainer Clip A made this because I lost one of the yellow clips that holds my dash together in my 2007 Toyota Tundra. They are Toyota part # 90467-10203. I printed in ABS and they worked fine for me but your results may very. https://3dcarparts.org/library/2007/Toyota/Tundra/dash-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/8521bf6b-6fea-4d07-aea3-8a78880fe70f/images/dash-retainer-clip-1_1777782903102_i5bp80.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Toyota/Tundra/dash-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-affdbff4-c9ee-4aff-864b-17f3d0eb27be 2006 Toyota Tundra Tailgate Handle Clip "the original file works but version 2 works better and will likely last much longer.
I borrow this design and customized it to fit my application which was a 2006 Toyota Tundra. The factory clip broke on the tailgate handle. This will probably work on other door handle clips. I'll give credit back to the original author of the door clip once I get back to my normal computer!" https://3dcarparts.org/library/2006/Toyota/Tundra/tailgate-handle-clip https://r2-upload.3dcarparts.workers.dev/file/parts/affdbff4-c9ee-4aff-864b-17f3d0eb27be/images/tailgate-handle-clip-2_1777782902092_n1t4si.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Toyota/Tundra/tailgate-handle-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-30872d70-7a1a-46d9-80e3-976029385596 2022 Toyota Tundra Cup Holder Spacer "This thing is a divider/spacer for the console cupholders on 2022+ Toyota Tundra that keeps tall go cups from tipping over and spilling, especially the driver's cup when you make left hand turns. It is designed to fit with a snug press fit so it doesn't move around or rattle. You could also add a small piece of double stick tape to the bottom if you like. This is printed in PLA but you can use anything... will probably be even better printed in TPU/Flex, which I plan to try.
There are 2 thing files... one for the front cupholder and the other for the rear. The holders are similar but just different enough to require different dividers. The rear spacer has slightly different front and back and only goes on one way. The rear has narrower distance from the sides in order to fit snug on the narrower protrusion in the rear of the holder.
Note: the file is oriented to print top side down to avoid supports and to give the smoothest possible finish for the top." https://3dcarparts.org/library/2022/Toyota/Tundra/cup-holder-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/30872d70-7a1a-46d9-80e3-976029385596/images/cup-holder-spacer-1_1777782902658_mrhh3u.jpg in_stock 25.68 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Toyota/Tundra/cup-holder-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d59ff183-765c-4169-ae78-b6947b565d8e 2007 Toyota Tundra / Sequoia Dash Coin Cover A cover to simply cover up the coin holder on a 2007+ tundra or sequoia. Snaps in with the holding tabs on top and bottom in a vertical orientation. https://3dcarparts.org/library/2007/Toyota/Tundra%20%2F%20Sequoia/dash-coin-cover https://r2-upload.3dcarparts.workers.dev/file/parts/d59ff183-765c-4169-ae78-b6947b565d8e/images/dash-coin-cover-1_1777782900524_b4nna7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Toyota/Tundra%20%2F%20Sequoia/dash-coin-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8545d475-5477-418e-880f-4643cc44be5b 2012 Toyota Tundra Rear Window Dash Camera Mount "I designed this mount specifically for my 2012 Toyota Tundra as there is no good location for a rear facing camera to mount inside the cab, and adhering it to the window was not an option since the window rolls down. That being said, the ""long"" mount should work for just about any vehicle that has this shape of lip on the rear of the headliner and the ""short"" mount should work for almost any headliner in almost any vehicle. Simply pull down the back edge of the headliner, clip the mount onto it, put the headliner back in place, and adhere the camera to it. I personally recommend using alien tape to affix the camera to the clip/mount because I find it grabs onto PETG very well." https://3dcarparts.org/library/2012/Toyota/Tundra/rear-window-dash-camera-mount https://r2-upload.3dcarparts.workers.dev/file/parts/8545d475-5477-418e-880f-4643cc44be5b/images/rear-window-dash-camera-mount-1_1777782902267_z0fv7k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Toyota/Tundra/rear-window-dash-camera-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f6c37212-dd5d-4faf-ac49-01e516445160 2004 Toyota Tundra AC Knob Replacement knob for Air conditioning control in an 04 Toyota Tundra https://3dcarparts.org/library/2004/Toyota/Tundra/ac-knob https://r2-upload.3dcarparts.workers.dev/file/parts/f6c37212-dd5d-4faf-ac49-01e516445160/images/ac-knob-1_1777782889945_nfl5l7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Toyota/Tundra/ac-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1baf5b93-9c67-47b6-8daf-4af3e2c69bb9 2004 Toyota Tundra Air Conditioning Control Knob "Accessible replacement knob for Air conditioning control in an 04 Toyota Tundra
Wife's wrist is fused and does not bend. The knob by scoot13 was used as a basis to make knobs that stand out and more accessible for her to turn with her fingers. She LOVES having the custom pink color in the cab! Thank you scoot13!" https://3dcarparts.org/library/2004/Toyota/Tundra/air-conditioning-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/1baf5b93-9c67-47b6-8daf-4af3e2c69bb9/images/air-conditioning-control-knob-1_1777782887977_xktdwa.jpg in_stock 16.34 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Toyota/Tundra/air-conditioning-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-418e6f56-1dbe-4901-8654-f9bd5f20fb40 2003 Toyota Tundra Rear Window Clamp Arm My 2003 Toyota Tundra Access Cab has those windows in the back that don't roll down, but have a clamp that lets you open the back side of the window or clamp it closed. On one side, the arm inside the clamp snapped, making it impossible to keep the window fully open or fully closed. The arm is attached just by simple pressure pins which are easy to remove. So I 3D printed a new arm piece. https://3dcarparts.org/library/2003/Toyota/Tundra/rear-window-clamp-arm https://r2-upload.3dcarparts.workers.dev/file/parts/418e6f56-1dbe-4901-8654-f9bd5f20fb40/images/rear-window-clamp-arm-1_1777782882323_k2mcee.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Toyota/Tundra/rear-window-clamp-arm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ae1426d9-c4a0-481b-8157-8faf421e2e89 2002 Toyota Tundra Heater Control Knob "This is a replacement for the heater control knob in a 2002 Toyota Tundra. This original model was based on the actual knob, with some simplification of the grip for printing. It should print well with the knob handle down and the connector pointing up, though you may choose to anchor it with a brim or raft.
It was tested in the actual vehicle and it worked perfectly.
I would suggest using 100% infill for strength, but the connector part that plugs onto the shaft is pretty much solid by default due to the thickness of the walls, so it's probably not necessary." https://3dcarparts.org/library/2002/Toyota/Tundra/heater-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/ae1426d9-c4a0-481b-8157-8faf421e2e89/images/heater-control-knob-1_1777782878109_v23cun.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Toyota/Tundra/heater-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f37957ec-6752-4672-8702-d7df9e234bbf 2013 Subaru XV Crosstrek Trailer Hitch Cover "This is a DIY version of the hitchcloak cover designed by Torklift Central (http://torkliftcentral.com/the-hitchcloak-subaru-xv-crosstrek-x7281) to go with their ecoHitch hidden trailer hitch for the Subaru Crosstrek (http://torkliftcentral.com/2013-2016-subaru-xv-crosstrek-ecohitch-invisi).
The door is designed to have two of the short 4-40 brass threaded heat inserts sold by McMaster-Carr: http://www.mcmaster.com/#93365A120 to mount a piece of aluminum with neodymium magnets attached to it. The magnets attract to the top face of the inside of the hitch and hold the door in place.
It is also a fairly snug fit, you may need to sand it down a bit or modify it based on your printer to have some clearance." https://3dcarparts.org/library/2013/Subaru/XV%20Crosstrek/trailer-hitch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/f37957ec-6752-4672-8702-d7df9e234bbf/images/trailer-hitch-cover-1_1777782785940_ptr4tg.jpg in_stock 20.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Subaru/XV%20Crosstrek/trailer-hitch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ed6532c7-d39c-4017-9179-3f5372889cc6 2018 Subaru Crosstrek Center Console Tray Insert Got a new car and the center console didn't have an upper tray! So I looked and there was a promise of one in the works if enough orders were reached. I don't have that kind of patients. Fits my center console nicely and the finger holes make it easy to remove or route cables. https://3dcarparts.org/library/2018/Subaru/Crosstrek/center-console-tray-insert https://r2-upload.3dcarparts.workers.dev/file/parts/ed6532c7-d39c-4017-9179-3f5372889cc6/images/center-console-tray-insert-1_1777782779982_f51yg4.jpg in_stock 16.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Subaru/Crosstrek/center-console-tray-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e165bc8a-81eb-4ca9-a94f-90ea5dbbbd77 2020 Subaru Crosstrek Cup Holder Insert This is a cupholder insert for a 2020 Subaru Crosstrek. I specifically designed it for a large McDonald's soda cup haha! This will keep the McD's cup (and most other cups I presume) from tipping over in the short, oversized existing cupholder. https://3dcarparts.org/library/2020/Subaru/Crosstrek/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/e165bc8a-81eb-4ca9-a94f-90ea5dbbbd77/images/cup-holder-insert-1_1777782773651_ma8nhf.jpg in_stock 27.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Subaru/Crosstrek/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12764510-1ae4-4f91-b854-d28ce506b5f5 2024 Subaru Crosstrek Center Console Tray Organizer "This is a Subaru Crosstrek 2024 tray to organize your stuffs inside central console.
Is made in two parts to be easy to print because is too large for usual 3d printers.
If you want also you can cut in foamy carpet to reduce any noise of your stuffs." https://3dcarparts.org/library/2024/Subaru/Crosstrek/center-console-tray-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/12764510-1ae4-4f91-b854-d28ce506b5f5/images/center-console-tray-organizer-1_1777782773067_o5zsol.jpg in_stock 24.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2024/Subaru/Crosstrek/center-console-tray-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-91b0b406-49ce-44c9-9eb1-b69fa5c43d9b 2018 Subaru Crosstrek Cup Holder Divider Insert "None of my former cup holder dividers fit well in the Crosstrek ... so I made one that fits nicely!
Added another simple half divider file." https://3dcarparts.org/library/2018/Subaru/Crosstrek/cup-holder-divider-insert https://r2-upload.3dcarparts.workers.dev/file/parts/91b0b406-49ce-44c9-9eb1-b69fa5c43d9b/images/cup-holder-divider-insert-1_1777782768499_m3b7g0.jpg in_stock 11.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Subaru/Crosstrek/cup-holder-divider-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c4811dee-0a08-47c5-b429-870369abbfe8 2021 Subaru Crosstrek Fog Light Bracket "Has this ever happened to you? I hope not! Even though this ""shredded"" piece of plastic is all that broke, I would've had to replace the entire fog light. If I wanted to do that, I'd hope the entire fog light broke. So! I decided to replicate the original design and beef up what broke on the original.
This particular 3D model fits on a 2023 Crosstrek Premium. For other model year fitments, see below. I assume this will fit on other trims as well, but I have included a tester bracket so you don't waste any plastic!
Please note that at some point Subaru changed the design! The approximate fitments are as follows:
(Model Years : Thingiverse Model)
20##-2017 : Unknown
2018-2020 : *Please note that there may be some slight differences between model years in this range. Look closely at the pins on the left and right side of each Fog Light. This model is an alternative, if needed: https://www.thingiverse.com/thing:6751344
2021-2023 : This model!
2024-202# : Unknown
A HUGE thanks to jacksenz for remixing this design!
-------------------------------------------------------------------------------
I have included the following models:
-Tester Bracket (Confirm it fits!)
-Base Bracket
-Adjustment Arm (Accepts the stock plastic adjustment screw)
-Adjustment Arm Insert (In case you want to use the screw below)
-Short and Long Fake Lights (Standard Globe, ""Realistic"", and ""Stylized"")
You may need:
-M5 x 70, .80 Pitch Screw (Replaces the stock adjustment screw, Adjustment Arm Insert required)
Bracket Assembly (Not For Fake Lights):
***If you aren't sure if this will fit, print and place a tester bracket in the place of the previous fog light bracket. Continue if it fits.***
-Print desired 3D models, remove support structures, and follow Post-Processing steps as needed.
-Insert the Adjustment Arm into the Base Bracket. This should be a snug fit.
-(If using the M5 screw) Insert the Adjustment Arm Insert into the Adjustment Arm from the top. Do NOT insert it from the bottom. See fully assembled images for reference.
-Remove old fog light(s), if not done yet. Remove 1 mounting screw and 1 body clip from each fog light. Rotate out of mounting area(s).
-Place the fog light into the Base Bracket, squeezing the top and bottom of the Base Bracket lightly such that the fog light's left and right nubs can be inserted into the holes one at a time.
-Install the fog light assembly into the fog light receptacle. Note that the bracket will need to be inserted into the outer-most body slots FIRST, then rotated in to the screw and clip mounting areas.
-Install 1 mounting screw and 1 mounting clip for each fog light to secure into place. Done!
The only supports *required* are on the Base Bracket model. ""Support on build plate only"" is suggested. PETG is suggested, no other materials have been tested.
NOTE: The Adjustment Arm will require post processing in order to fit snugly.
If you are NOT using the stock adjustment screw and opt to use the M5 screw, the Adjustment Arm Insert should spin *freely* within the Adjustment Arm, replacing the need for the stock plastic adjustment screw. The insert may need to be sanded down if it does not fit snugly!
I have also included ""Fake Lights"" in the case that someone just wants to replace their fog lights altogether, but don't want a gaping hole. I have also included fog light plug holders on each fake light 3D model, so you don't have wires dangling around. There are two main types, shallow and long. Shallow leaves some space between the bumper and the fake light. Long should butt right up against the bumper and will be a tight fit. Post processing may be needed on the long ones in order to fit snugly!" https://3dcarparts.org/library/2021/Subaru/Crosstrek/fog-light-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/c4811dee-0a08-47c5-b429-870369abbfe8/images/fog-light-bracket-1_1777782787231_34lkvz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2021/Subaru/Crosstrek/fog-light-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a6570ce9-f4cb-4337-a244-8008f527dfd4 2012 Subaru Crosstrek XV Tweeter Upgrade Bracket "Quick adapter I modeled to allow you to mount Dayton Audio 5/8"" tweeters into the stock location on the Subaru Crosstrek XV. This should work in models made in the years 2012-2017, I do not have access to a 2018 model to test to confirm fitment. See the full parts list and walk through by Coletrain here http://www.subaruxvforum.com/forum/interior-audio/11002-20-tweeter-upgrade.html
The tweeter is a friction fit but I used some non acidic silicon to secure it but hot glue would do the same job." https://3dcarparts.org/library/2012/Subaru/Crosstrek%20XV/tweeter-upgrade-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/a6570ce9-f4cb-4337-a244-8008f527dfd4/images/tweeter-upgrade-bracket-1_1777782767381_sib3bd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Subaru/Crosstrek%20XV/tweeter-upgrade-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9ec47d70-6742-4d76-aaf8-f9c4f95efd66 2018 Subaru Crosstrek Centre Console Insert "really basic remix of a console tray (original by TyCreek, thank you!) by adding some coin spots for my change :)
first remix/post - thanks to everyone for sharing their creations" https://3dcarparts.org/library/2018/Subaru/Crosstrek/centre-console-insert https://r2-upload.3dcarparts.workers.dev/file/parts/9ec47d70-6742-4d76-aaf8-f9c4f95efd66/images/centre-console-insert-1_1777782765904_8jueax.jpg in_stock 19.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Subaru/Crosstrek/centre-console-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b258c035-8d1b-48c6-8580-8f68196ced6b 2019 Subaru Crosstrek Visor Pivot "Replacement visor pivot for a 2019 Crosstrek, and applicable to other models. The unique two-piece design permits the large power connector to pass through.
To assemble: Slide together side 1 and side 2 so the shaft of the visor is in between the two pieces. Slide collar over shaft so it lines up with the bevels of the sides. Secure with a dab of super glue if you like. Screw in as assembly to ceiling.
Recommended print settings:
Material: ASA or PA6
Walls: 10
Infill Percentage: 100%
[OnShape CAD Link](https://cad.onshape.com/documents/8f6fbe67cec0ed54c83d55a1/w/cb3bce19bec22d9732967100/e/157363ac4a9f9c17c0d68254?renderMode=0&uiState=68ab2fd3bb32414a337fbe5e)" https://3dcarparts.org/library/2019/Subaru/Crosstrek/visor-pivot https://r2-upload.3dcarparts.workers.dev/file/parts/b258c035-8d1b-48c6-8580-8f68196ced6b/images/visor-pivot-1_1777782764890_c4hnie.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Subaru/Crosstrek/visor-pivot?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b70bd67f-b7d5-4de2-8d46-e1952bf9c350 2013 Subaru XV Fuse Box Cover Cover for Subaru XV cabin fuse box. Fits on my 2013, not sure about newer models. Useful to punch holes in and mount switches. Also has slots to store spare fuses. https://3dcarparts.org/library/2013/Subaru/XV/fuse-box-cover https://r2-upload.3dcarparts.workers.dev/file/parts/b70bd67f-b7d5-4de2-8d46-e1952bf9c350/images/fuse-box-cover-1_1777782761125_zwobj3.jpg in_stock 10.61 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Subaru/XV/fuse-box-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0ef39109-0c45-4288-aba4-2de989dce315 2018 Subaru Crosstrek Foglight Bracket Hi all. Following up on the design by doughnutVan (thanks for the starting point). My Crosstrek is a 2018 Limited and the design didn't fit my stock fog light exactly. So I widened the holes and implemented more of a ramp/slope in for retention. It seems to be a snug fit. You will still need the arm bracket piece from doughnutVan's design if you're using the adjustment bolt. This is just for the Bracket Base. https://3dcarparts.org/library/2018/Subaru/Crosstrek/foglight-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/0ef39109-0c45-4288-aba4-2de989dce315/images/foglight-bracket-1_1777782757680_6vqp52.jpg in_stock 18.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2018/Subaru/Crosstrek/foglight-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3069ed3b-2811-461d-8464-a86c748f186f 2016 Subaru Impreza Hood Support Rod End Cap "This is a printable replacement for a Subaru Impreza hood support rod end cap - or whatever you want to call the plastic part that fits into the hood slot when the rod is raised. This piece (white piece in picture) broke on our 2016 Impreza and Subaru seems to only sell the entire rod, not just the cap piece, so I decided to take a whack at modeling and printing a new one. I'm new to Fusion 360, so it took a few tries, but this one is working nicely for me. I'm not sure which other Subaru models/years this would work for, but there's not really much to it, so if it looks like the part in the picture, you can give it a shot!
The part is pretty close to the original, though I did beef it up a bit in the area where the original one broke. I also set infill at 50% which might be overkill, but it seemed better to overbuild. You'll need to print with supports, and be sure to have your xacto handy to do some somewhat fiddly cleanup. I printed this using Prusament Galaxy Black PLA, mainly because it's all I have on hand, but let's face it, the engine compartment of a Subaru Impreza could use a little glittery bling, right?" https://3dcarparts.org/library/2016/Subaru/Impreza/hood-support-rod-end-cap https://r2-upload.3dcarparts.workers.dev/file/parts/3069ed3b-2811-461d-8464-a86c748f186f/images/hood-support-rod-end-cap-1_1777782756367_fj235d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2016/Subaru/Impreza/hood-support-rod-end-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-07b5cec7-250e-448d-bafc-c538985436ae 2017 Subaru Crosstrek Rear Speaker Adapter "2017 Subaru Crosstrek rear speaker adapter. These will mount to the factory hole location and hold a 6.5"" speaker." https://3dcarparts.org/library/2017/Subaru/Crosstrek/rear-speaker-adapter-2 https://r2-upload.3dcarparts.workers.dev/file/parts/07b5cec7-250e-448d-bafc-c538985436ae/images/rear-speaker-adapter-2-1_1777782753488_uj3wyd.jpg in_stock 20.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Subaru/Crosstrek/rear-speaker-adapter-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ae4e433c-1cd8-4b4d-bfe2-0ae9f090f520 2022 Subaru Crosstrek Rear Hatch Interior Release Button Plate "This is my first upload ever. I made this in fusion 360. This is for a 2022 Subaru Crosstrek. I got the idea after watching Tom the Dilettante's YouTube video for his 2019 Crosstrek. I didn't want to drill the factory panel so I used my very limited knowledge and resources to create this. Feel free to modify/improve it and upload your take on the button plate.
I used the same momentary push button as Tom, it keeps it simple." https://3dcarparts.org/library/2022/Subaru/Crosstrek/rear-hatch-interior-release-button-plate https://r2-upload.3dcarparts.workers.dev/file/parts/ae4e433c-1cd8-4b4d-bfe2-0ae9f090f520/images/rear-hatch-interior-release-button-plate-1_1777782751108_gl8sl1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Subaru/Crosstrek/rear-hatch-interior-release-button-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-968744f7-5e6b-48fd-a6cf-7a5a129f8fc1 2017 Subaru Crosstrek Rear Speaker Adapter "Speaker adapter for a 2017 Subaru Crosstrek. The outer holes screw into the factory 3-hole mounting locations, and the inner holes are 4 holes..
These work for the reara speakers. I installed these in my 2017 Subaru Crosstrek, but it should work for any Impreza-based car from that generation ('08-14). The aftermarket holes were sized for Kicker 46CSC654." https://3dcarparts.org/library/2017/Subaru/Crosstrek/rear-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/968744f7-5e6b-48fd-a6cf-7a5a129f8fc1/images/rear-speaker-adapter-1_1777782749740_ypwwy5.jpg in_stock 14.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Subaru/Crosstrek/rear-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0fe2de2e-72df-42cb-a0e0-5471061b7cd0 2018 Subaru Crosstrek Center Console Tray "A remix of TyCreek's design. Resized it to fit higher in the console, as well as added coin slots, pen slot, cord pass through, and gripping point.
Should fit the center console of 2018+ Subaru Crosstreks." https://3dcarparts.org/library/2018/Subaru/Crosstrek/center-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/0fe2de2e-72df-42cb-a0e0-5471061b7cd0/images/center-console-tray-1_1777782746195_03qwlj.jpg in_stock 20.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Subaru/Crosstrek/center-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-637bfa87-5602-4765-b54f-f8e81dd76818 2013 Subaru Impreza / Crosstrek Center Console Tray "Remix of the dmerand 2013 Impreza/Crosstrek center console tray, this version is about 20 mm deeper than the original to allow for larger objects to fit in the tray.
Printed on - Creality Ender3 V3 SE
20% infill, tree supports via Creality print." https://3dcarparts.org/library/2013/Subaru/Impreza%20%2F%20Crosstrek/center-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/637bfa87-5602-4765-b54f-f8e81dd76818/images/center-console-tray-1_1777782743416_etik71.jpg in_stock 21.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Subaru/Impreza%20%2F%20Crosstrek/center-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb58de74-44b7-409c-9ac0-7366aae17186 2000 Subaru Impreza Hood Prop Retaining Clip Hood prop retaining clip I made for my 2000 Subaru Impreza Outback Sport. I'm sure it fits other Imprezas and maybe even other Subarus but I don't know the part number it replaces. If I find out I will update. It is modeled as close to stock as possible but made flat on one side so it will be easier to print. https://3dcarparts.org/library/2000/Subaru/Impreza/hood-prop-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bb58de74-44b7-409c-9ac0-7366aae17186/images/hood-prop-retaining-clip-1_1777782697561_cq24et.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2000/Subaru/Impreza/hood-prop-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5a78c42b-8fa3-4116-96fd-f2f97ea36245 2006 Subaru Impreza Front Speaker Spacer Ring "Quick spacer ring I made to fit Sony XS-GTX1622S 6.5"" mids in my MY06 Hawkeye Impreza to replace my old wood ones that were swollen.
These should fit most 6"" - 6.75"" aftermarket speakers and raises them by 20mm in order for the basket to clear the window when it is down (as the standard speaker is low profile)" https://3dcarparts.org/library/2006/Subaru/Impreza/front-speaker-spacer-ring https://r2-upload.3dcarparts.workers.dev/file/parts/5a78c42b-8fa3-4116-96fd-f2f97ea36245/images/front-speaker-spacer-ring-1_1777782693702_6xx97n.jpg in_stock 28.94 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Subaru/Impreza/front-speaker-spacer-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9bcce0fc-93ad-4859-8441-7dad0323d4a6 2008 Subaru Impreza Cup Holder Insert "This thing is a replacement part for 3rd gen Subaru Impreza cup holders. It may fit other Subaru models from that same period. It helps center a standard diameter beverage can in the cup holder so it doesn't slide around. It also collects condensation and leaked drink.
It probably could use an extruded honeycomb pattern to give liquid a place to run off to..." https://3dcarparts.org/library/2008/Subaru/Impreza/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/9bcce0fc-93ad-4859-8441-7dad0323d4a6/images/cup-holder-insert-1_1777782691944_o2qojx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Impreza/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5b2801c5-7b7c-48a4-9631-2cbe63b308cc 2012 Subaru Impreza Tumbler Cup Holder Caddy "basic mug carrier for Ozark trail 20oz tumbler (walmart brand) might fit the yeti 20oz. fits in the center dual cup holder in the 2012-2017 subaru impreza.
the wife and I commute to work together and loosing 2 hands for a drink is pretty inconvenient lol
enjoy!" https://3dcarparts.org/library/2012/Subaru/Impreza/tumbler-cup-holder-caddy https://r2-upload.3dcarparts.workers.dev/file/parts/5b2801c5-7b7c-48a4-9631-2cbe63b308cc/images/tumbler-cup-holder-caddy-1_1777782689947_xp175k.jpg in_stock 21.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Subaru/Impreza/tumbler-cup-holder-caddy?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c29eefaf-8285-4b71-9613-e5bb2d486a3d 2012 Subaru Crosstrek Console Organizer Tray Subaru Impreza 12-16 and Crosstrek 12-17 Console tray with cord hole and coin organizer. https://3dcarparts.org/library/2012/Subaru/Crosstrek/console-organizer-tray https://r2-upload.3dcarparts.workers.dev/file/parts/c29eefaf-8285-4b71-9613-e5bb2d486a3d/images/console-organizer-tray-1_1777782683471_8zzigi.jpg in_stock 20.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Subaru/Crosstrek/console-organizer-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a63d13f1-b960-4d0e-aa11-47e0c8379b13 2000 Subaru Impreza Dash Blanking Plate Subaru Impreza Newage dash hole blanking plate. Removable like the original parts. Presumed to also fit other Subaru models / years. https://3dcarparts.org/library/2000/Subaru/Impreza/dash-blanking-plate https://r2-upload.3dcarparts.workers.dev/file/parts/a63d13f1-b960-4d0e-aa11-47e0c8379b13/images/dash-blanking-plate-1_1777782678738_yv396i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Subaru/Impreza/dash-blanking-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2288546-c752-4dcb-9933-542f6d2a41b9 1993 Subaru Impreza Cup Holder Cupholder for a 93-2001 Subaru Impreza https://3dcarparts.org/library/1993/Subaru/Impreza/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/b2288546-c752-4dcb-9933-542f6d2a41b9/images/cup-holder-1_1777782679116_cngrtj.jpg in_stock 29.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Subaru/Impreza/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7933e130-9172-4ecc-a8f1-7ac7544fdac6 2001 Subaru Impreza Center Console Cup Holder Insert '01 Imprezas are great cars but lack cup holders (there's only 1)! This insert goes in the center console and can be used to hold larger drink vessels. Probably fits other Subaru models around the same era (90s - earl 2000s). https://3dcarparts.org/library/2001/Subaru/Impreza/center-console-cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/7933e130-9172-4ecc-a8f1-7ac7544fdac6/images/center-console-cup-holder-insert-1_1777782670425_u6xjw8.jpg in_stock 37.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Subaru/Impreza/center-console-cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aaf8294f-c54c-4a7d-9197-b53405a42401 2013 Subaru Impreza Center Console Tray "### 2013 Subaru Impreza-Compatible Center Console Tray
Author: Donald L. Merand
### What Is It?
I wanted one of [these](http://www.amazon.com/Genuine-Subaru-J2010FJ000VH-Center-Console/dp/B009GNKCL4) but figured I could just 3d print one instead of purchasing it. Also, I want different features, such as the ability to turn that console into a cupholder for liter-bottles, because the car's other cupholders aren't that large. And in general, it makes sense to be able to customize your stuff!
I'm attaching a ""basic"" tray, which is similar to the stock one, and a ""large cupholder"" version. But see below for the link to the parametric model so that you can go crazy with your own designs! It's fun + easy!
### How Do I Make One?
You just 3d print it! Although if you were fancy I suppose you could CNC machine one out of mahogany and wow your friends. Who happened to look in your center console...
On mine I just put some supports under the little square tabs, and it printed out great! I used PLA, 0.2mm layer resolution.
### What If I Have Needs?
You could definitely just head on over to the [Onshape Template](https://cad.onshape.com/documents/08b34d3fc3725dd81ae2003e/w/999b50105e70899fdc275129/e/3942903e7fe7aabe2b545e4a) for this thing + customize to your heart's content!" https://3dcarparts.org/library/2013/Subaru/Impreza/center-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/aaf8294f-c54c-4a7d-9197-b53405a42401/images/center-console-tray-1_1777782670690_3teyrc.jpg in_stock 17.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Subaru/Impreza/center-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-62cbbace-eff6-4558-8379-19db869e9b30 1993 Subaru Impreza Rear Cup Holder This is a cupholder i personally designed to fit right into the ashtray for a 1993-2001 Subaru Impreza mine never came with one i had a parts car that had an ash tray and i thought to myself hey i can make one of those so this is a first attempt if you want to download and print go for it putting support everywhere is my suggestion because those clips that it has are kind of flimsy but im personally using an ender 3 with a big boy 1mm nozzle with black pla filament printing at a temp of 220 with a bed temp of 55 i have tri hexagon support turned on with 10% infill supporting a 40 degree incline angle will probably need to sand the corners down a bunch. https://3dcarparts.org/library/1993/Subaru/Impreza/rear-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/62cbbace-eff6-4558-8379-19db869e9b30/images/rear-cup-holder-1_1777782667667_mb2pnw.jpg in_stock 27.23 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Subaru/Impreza/rear-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-25f7733c-88e3-4b91-a5b6-4630100ff639 2008 Subaru Impreza Cup Holder Adapter "Tired of spilling your beer while driving around in your Subaru Impreza? This thing is for you!!
Seriously, I always end up spilling anything I put in my Impreza cup holder.. it's too big to fit normal soda cans so they always swinging around when i drive. I made up these little rings so it fits perfectly.
In my car, the front hole was a little bigger then the rear one so I made it 0.5mm bigger. I don't know if it's the case for everyone.
This should fit any Impreza 2008 to 2011 Sedan. (2.5i and WRX. Not sure about STi.Tell me if you ever try it) It could fit many Subary car between these years, i'm not sure about other models, let me know if you try.
Enjoy!" https://3dcarparts.org/library/2008/Subaru/Impreza/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/25f7733c-88e3-4b91-a5b6-4630100ff639/images/cup-holder-adapter-1_1777782669505_m4wdzg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Impreza/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-acb3b8f9-9981-4241-8c55-5885af1a68e0 2008 Subaru WRX Boost Gauge Vent Mount This is a custom replacement vent for mounting a 52mm boost gauge into. It fits on a Subaru WRX and prints without support. It should fit on 2008-20014 Surbaru WRX's. The specific year WRX I made this for was a 2013. https://3dcarparts.org/library/2008/Subaru/WRX/boost-gauge-vent-mount https://r2-upload.3dcarparts.workers.dev/file/parts/acb3b8f9-9981-4241-8c55-5885af1a68e0/images/boost-gauge-vent-mount-1_1777781860095_88n0q9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/WRX/boost-gauge-vent-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-68fc1a0f-c1a5-4da0-b297-0598f5229687 2015 Subaru WRX Screw-In Oil Fill Funnel Screw in oil fill funnel for late model Subaru WRX with FA20F engine. Should work on any of the FA series engines. Likely works on a lot of Subaru engines. https://3dcarparts.org/library/2015/Subaru/WRX/screw-in-oil-fill-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/68fc1a0f-c1a5-4da0-b297-0598f5229687/images/screw-in-oil-fill-funnel-1_1777781849435_3vbhgl.jpg in_stock 21.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2015/Subaru/WRX/screw-in-oil-fill-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0e63e4f8-3b17-4f0f-b1f2-2bef6f197dfd 2002 Subaru Impreza WRX Gear Knob Adaptor "This part clips into the bottom of a Momo gear knob and holds the leather shift boot/gaiter up - just like the standard knob does.
I designed this for my 2002 Subaru WRX but it may suit other cars. The gear knob I have is the Momo Race Air.
If you like this model you can send me a tip at https://paypal.me/jeffmeares1
Thanks!" https://3dcarparts.org/library/2002/Subaru/Impreza%20WRX/gear-knob-adaptor https://r2-upload.3dcarparts.workers.dev/file/parts/0e63e4f8-3b17-4f0f-b1f2-2bef6f197dfd/images/gear-knob-adaptor-1_1777781836585_ubinzl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Impreza%20WRX/gear-knob-adaptor?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a5f26925-b74e-4a99-9454-60ee8f89394c 2008 Subaru Crosstrek / STI / WRX 40oz Water Bottle Cup Holder Adapter "This is a remixed model of the ""2019 Subaru Crosstrek_40 oz Water Bottle Holder"" made by tomecar. The goal of this remix was to reduce overhang angles to a max of 45º and to smooth out the overall geometry and appearance.
---
###Compatibility
I have not had an opportunity to test the compatibility on anything other than a 2019 Crosstrek. The other models listed use the same cup holder mat (92177AG170) leading me to believe that the cup holders they are paired with would have very similar if not identical dimensions and clearance.
**Here is a list of compatible models/years/trims that I got off of Subaru's website:**
| Model / Variant | Year |
|------------------------------------------|------------------------------------------|
| Subaru Crosstrek 2.0L 5MT Premium | 2016, 2017 |
| Subaru Crosstrek 2.0L CVT Premium | 2016, 2017 |
| Subaru Crosstrek 2.0L HYBRID CVT Premium | 2016 |
| Subaru STI 2.5L TURBO 6MT Base | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
| Subaru STI 2.5L TURBO 6MT LIMITED | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
| Subaru STI 2.5L TURBO 6MT Premium | 2018, 2019, 2020, 2021 |
| Subaru STI 2.5L TURBO 6MT Sport SEDAN | 2012, 2013, 2014 |
| Subaru STI 2.5L TURBO 6MT TYPE RA | 2018 |
| Subaru STI 2.5L TURBO 6MT WAGON | 2008, 2009, 2010, 2012, 2013, 2014 |
| Subaru WRX 2.0L 6MT Base | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
| Subaru WRX 2.0L 6MT Limited | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
| Subaru WRX 2.0L 6MT Premium | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
| Subaru WRX 2.0L 6MT PREMIUM HK | 2017 |
| Subaru WRX 2.0L CVT Base | 2015, 2016, 2019 |
| Subaru WRX 2.0L CVT Limited | 2015, 2016, 2017, 2018, 2019, 2020 |
| Subaru WRX 2.0L CVT Limited w/EyeSight | 2016, 2017 |
| Subaru WRX 2.0L CVT LIMITED WITH LIP ES | 2018, 2019, 2020, 2021 |
| Subaru WRX 2.0L CVT Premium | 2015, 2016, 2017, 2018 |
| Subaru WRX 2.0L CVT PREMIUM WITH LIP ES | 2019, 2020, 2021 |
| Subaru WRX 2.5L TURBO 6MT S209 | 2019 |
---" https://3dcarparts.org/library/2008/Subaru/Crosstrek%20%2F%20STI%20%2F%20WRX/40oz-water-bottle-cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/a5f26925-b74e-4a99-9454-60ee8f89394c/images/40oz-water-bottle-cup-holder-adapter-1_1777781836818_ene9pm.jpg in_stock 27.02 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Crosstrek%20%2F%20STI%20%2F%20WRX/40oz-water-bottle-cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-99cbd822-a2f7-4a99-9f7e-63e1c001c724 2009 Subaru Forester Strut Dust Cap "strut dust cap for Subaru forester. I designed it based on my 3rd gen forester, but based on images it appears that it would work on other generations too, but I don't have a way of checking. If anybody has a different generation or different model, I would be interested to know if it fits:)
This is a tight fit and is designed to be printed with a flexible filament (I use TPU) so that the sides can squish a bit and seal better when inserted, will not work well at all using PLA or ABS.
To fit some later model cars (specifically tested on 2018 XV, can be scaled to 116.67% or a little bit larger for a tighter fit. (Thanks TuckerBrah for testing this!)" https://3dcarparts.org/library/2009/Subaru/Forester/strut-dust-cap https://r2-upload.3dcarparts.workers.dev/file/parts/99cbd822-a2f7-4a99-9f7e-63e1c001c724/images/strut-dust-cap-1_1777781790529_5glgwg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/2009/Subaru/Forester/strut-dust-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f100cf9e-1c9f-495e-8606-b68cac743294 2002 Subaru Forester Speaker Adapter "I designed these to enable me to fit aftermarket speakers in my 2004 Forester.
I fitted (rear) 5.25"" and (front) 6.5"" Fli speakers (sound much better).
(theres a few similar designs on thingiverse if these are not exact for your needs)
Rears are only 7mm thick - check new speaker clearance - the ones I fitted just touched the grill/panel.
Front are 12mm thick and enabled my Fli speakers to clear the window when wound down, and easily cleared the grill./panel - so you could always scale the thickness up a little in your slicer to increase clearance at the window glass if needed.
Print in ABS to prevent warping in heat (PLA should be fine though I guess).
Photo only shows rears (I forgot to take photos of the fronts!) - same idea for the rears." https://3dcarparts.org/library/2002/Subaru/Forester/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/f100cf9e-1c9f-495e-8606-b68cac743294/images/speaker-adapter-1_1777781288344_lf4ng7.jpg in_stock 11.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Forester/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b7855bd2-a74c-407d-b7a6-08b4eb28c7d5 2004 Subaru Forester Cup Holder Extension "This is a cup holder extension modeled for use in my 2007 Subaru Forester to hold a 1L Nalgene water bottle.
This should be compatible with 04-08 Foresters, and will likely extend to other Subaru models, as it's unlikely that cup holder sizes have changed drastically from year to year :)
Printing with supports is required." https://3dcarparts.org/library/2004/Subaru/Forester/cup-holder-extension https://r2-upload.3dcarparts.workers.dev/file/parts/b7855bd2-a74c-407d-b7a6-08b4eb28c7d5/images/cup-holder-extension-1_1777781284898_s1gjxc.jpg in_stock 20.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Subaru/Forester/cup-holder-extension?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2f945884-7b54-4c93-b363-e8bcb609fc96 1997 Subaru Forester Speaker Adapter I designed this speaker adapter to mount a pair of hertz speakers for a friend on his Subaru Forester (model year 1997). The speakers are 165mm wide and he bought them from amazon (Hertz dcx 165). The adapter can be mounted on the front doors panel using the original screws and to link the speaker to the adapter you have to use the original screws plus one because it has four holes. To prevent vibration on the panel, it's recommended to put a little layer of insulation material on the adapter's surface that is in contact with the door's panel (as the original speaker mount). The adapter has two grooves, to pass the wires; and the higher depth of the speaker isn't a problem for the door glass (when you pull it down), it doesn't touch it. https://3dcarparts.org/library/1997/Subaru/Forester/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/2f945884-7b54-4c93-b363-e8bcb609fc96/images/speaker-adapter-1_1777781285184_d1xy9h.jpg in_stock 22.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Subaru/Forester/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c3cb0617-aa3b-4caa-9838-4711c5c52ca7 2004 Subaru Forester Bonnet Stay Clip "Broke the existing clip and instead of going to the wreckers looking for a replacement, why not print one?
This one works ok, if it breaks again I will be narrowing the mouth of the holder, lowering it and putting in some supports to make it's grip a little stronger.
Width of the ""C"" that holds the whole clip in place could also be a little wider to prevent it sliding left to right. Don't think it needs reshaping to get a better grip on the car.
May fit other years and models.
Hopefully I've designed the scad file so that it can be tweaked without too much stress.
-edit 2014 09 25-
Minor changes to give the clip and insert a little more strength." https://3dcarparts.org/library/2004/Subaru/Forester/bonnet-stay-clip https://r2-upload.3dcarparts.workers.dev/file/parts/c3cb0617-aa3b-4caa-9838-4711c5c52ca7/images/bonnet-stay-clip-1_1777781279350_87bj2m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2004/Subaru/Forester/bonnet-stay-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-daef8f65-1535-44a4-a71b-e2fed2fb612d 2000 Subaru Forester Windshield Washer Reservoir Cap "A friend of mine asked me to design and print a washer cap, for his landlord.
This is for a 2000 Subaru Forester, but it probably fits other cars too.
I used eBay ""Semi-Flex filament"", and printed the part on Double sided carpet tape." https://3dcarparts.org/library/2000/Subaru/Forester/windshield-washer-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/daef8f65-1535-44a4-a71b-e2fed2fb612d/images/windshield-washer-reservoir-cap-1_1777781277353_g0csvp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Subaru/Forester/windshield-washer-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3ac4e2f0-81fb-49b8-8007-87632cd300ef 2005 Subaru Forester Mudflaps Front "On my Subaru Forester SG 2005 install is plug and play.
I print it in TPU end 2019 , after cleaning looks like new
ABS hold only 3 month" https://3dcarparts.org/library/2005/Subaru/Forester/mudflaps-front https://r2-upload.3dcarparts.workers.dev/file/parts/3ac4e2f0-81fb-49b8-8007-87632cd300ef/images/mudflaps-front-1_1777781272403_ffyzvd.jpg in_stock 19.40 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Subaru/Forester/mudflaps-front?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-15fb54a6-ad82-4a5e-a18c-78ab0012d034 2002 Subaru Forester Door Release Lever Screw Cover "Lost one of my screw head covers from the door release handle of my Subaru Forest (2004).
Designed this to replace, fits well, if needed use a lighter etc to soften the prongs and gently tease outwards slightly to get a better fit (secure clip). Be careful as they are delicate.
Print a few at a time to give yourself spares, and also keep the print head moving allowing the tiny clips to cool between layers.
Print in ABS (might be ok in PLA, just be super careful with the prongs!)" https://3dcarparts.org/library/2002/Subaru/Forester/door-release-lever-screw-cover https://r2-upload.3dcarparts.workers.dev/file/parts/15fb54a6-ad82-4a5e-a18c-78ab0012d034/images/door-release-lever-screw-cover-1_1777781270461_1ro2a7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Subaru/Forester/door-release-lever-screw-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e465dd71-1c30-444f-91fe-d295fe60ff5b 2021 Subaru Forester Cup Holder Insert "This is a cup holder insert for a 2021 Subaru Forester (and possibly other Subraru models too) that will fit a 32/40 oz hydroflask water bottle (or other similarly sized 91mm diameter water bottle). The inner hole fits a standard 12 oz can or 16 oz soda bottle, up to a 73 mm diameter.
Print in PETG or ABS for better heat resistance in the warm sun. This doesn't need any supports if your printer can handle ~50-60 degree overhangs.
The default model is for the drivers side cupholder, if you want the passenger side too, just mirror the print so that the corner nub is pointing to the opposite side (see the picture)." https://3dcarparts.org/library/2021/Subaru/Forester/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/e465dd71-1c30-444f-91fe-d295fe60ff5b/images/cup-holder-insert-1_1777781262973_c0dxim.jpg in_stock 29.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2021/Subaru/Forester/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-30936a83-c600-4294-9df8-abd9a80722d2 2001 Subaru Forester Hood Support Bar Clip "Hood support clip for 2001 Subaru Forester. Two versions are available:
- One that mimics the original where the bar clip and body clip are offset
- A simplified clip where the two parts are aligned vertically." https://3dcarparts.org/library/2001/Subaru/Forester/hood-support-bar-clip https://r2-upload.3dcarparts.workers.dev/file/parts/30936a83-c600-4294-9df8-abd9a80722d2/images/hood-support-bar-clip-1_1777781251052_24e23d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2001/Subaru/Forester/hood-support-bar-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-87c7e9cf-b4f4-4736-bad2-3a770c2a453c 2014 Subaru Forester Cup Holder Insert "I broke my cupholder insert in my Forester so I built a new one. The old one did not fit my Yeti style cups securely so I redesigned it for a better fit. This should fit the newer Forester, but I'm not sure. Print in ABS.
It's a snug fit. Remove the old insert." https://3dcarparts.org/library/2014/Subaru/Forester/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/87c7e9cf-b4f4-4736-bad2-3a770c2a453c/images/cup-holder-insert-1_1777781238740_h8lc9n.jpg in_stock 23.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Subaru/Forester/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7889adb-ad5c-4ec8-88c5-35302b490ff0 2006 Subaru Forester Rear Speaker Spacer Rear Speaker spacer for 2006 Subaru Forester https://3dcarparts.org/library/2006/Subaru/Forester/rear-speaker-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/f7889adb-ad5c-4ec8-88c5-35302b490ff0/images/rear-speaker-spacer-1_1777781237372_t368w8.jpg in_stock 19.46 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Subaru/Forester/rear-speaker-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2ee5c019-15b0-48b4-9409-4d9e18a6925d 2008 Subaru Forester Sun Visor Mount "This is the mount that holds up the sun visor in a 2008 Subaru Forester. On my 10 year old car, the visor mount cracked and the visor fell out, so I designed this replacement. It works great. I would imagine that it works in other model years and maybe even other Subaru models as well, but I do not know for sure. I printed this in ABS and it works great. Keeps the sun out of your eyes!
SolidPart is from SolidWorks 2016." https://3dcarparts.org/library/2008/Subaru/Forester/sun-visor-mount https://r2-upload.3dcarparts.workers.dev/file/parts/2ee5c019-15b0-48b4-9409-4d9e18a6925d/images/sun-visor-mount-1_1777780995614_ozbrtr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Subaru/Forester/sun-visor-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-174d5cb1-707e-478c-8841-e27dc2ae7466 2011 Subaru Outback Fuse Cover Clip "Clips to hold the fuse cover closed on a Subaru. Tested on a 2011 Outback.
Remove supports then it's plug and play :)
Thanks to user 01001010 for the inspiration." https://3dcarparts.org/library/2011/Subaru/Outback/fuse-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/174d5cb1-707e-478c-8841-e27dc2ae7466/images/fuse-cover-clip-1_1777780993302_tn99kk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Subaru/Outback/fuse-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-66a4ac41-25ae-4061-a3bf-a7eb1ea68408 2017 Dodge Ram 1500 USB Panel Insert Revised parts. I uploaded the wrong one earlier. Sorry.... it easier to just print plate and not the tray insert. Insert to provide additional USB outlets for dodge ram 1500 2017 https://3dcarparts.org/library/2017/Dodge/Ram%201500/usb-panel-insert https://r2-upload.3dcarparts.workers.dev/file/parts/66a4ac41-25ae-4061-a3bf-a7eb1ea68408/images/usb-panel-insert-1_1777780878089_nxtjmx.jpg in_stock 22.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Dodge/Ram%201500/usb-panel-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a23a2980-c01f-44f7-a873-9e8b26594d83 2016 Ram RAM 2500 Grille Nameplate Letter Mount Tabs "Grille mounts for (2019 OEM) Grille Nameplate / Letters for Dodge Ram. Used these to clip letters to an aftermarket grille on my 2016 2500 RAM.
Tab mounts hight can be adjusted to allow for a perfect fit (stock is 2mm, leaving 3mm for grille).
Purchased the OEM letters here: https://tinyurl.com/y9o5ppw9
Did you found this Thingy useful? I would greatly appreciate if you could donate a cup of coffee, so I can continue to spend late nights creating useful things.
" https://3dcarparts.org/library/2016/Ram/RAM%202500/grille-nameplate-letter-mount-tabs https://r2-upload.3dcarparts.workers.dev/file/parts/a23a2980-c01f-44f7-a873-9e8b26594d83/images/grille-nameplate-letter-mount-tabs-1_1777780881658_cisnny.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Ram/RAM%202500/grille-nameplate-letter-mount-tabs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d5c41c85-b51a-4b56-b1bf-ea10df390362 2004 Ford Focus Tweeter Support Ring Tweeter support ring for Ford Focus mk2/second series https://3dcarparts.org/library/2004/Ford/Focus/tweeter-support-ring https://r2-upload.3dcarparts.workers.dev/file/parts/d5c41c85-b51a-4b56-b1bf-ea10df390362/images/tweeter-support-ring-1_1777607293770_eg36ip.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/tweeter-support-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9120cb42-7674-46ca-a595-3aa75694c982 1998 Ford Focus Reverse Light LED Support "This thing came to mind as a better solution for reverse lights + fog light on the Ford Focus MK1 (also works on MK2 pre-facelift). I designed it, printed it, built it and tested it.
You will need a LHD and RHD reverse light for the Focus, some LEDs, resistors, FLRY wires and a bit of patience. I made it with 6x 5mm LEDs and 6x 3mm LEDs, warm white and red. You can opt for cool white LEDs or even just add more 3mm LEDs. I made a wiring harness out of FLRY automotive grade wire and made all connections inside the vehicle. Overkill, I know.
In my case on the right side I have 2 wire only white LEDs and on the left side 3 wires (GND, Reverse, Fog), 6 big white LEDs and 6 small red 3mm LEDs. Used a label maker to label all wires and spade connectors to be able to rewire it if they say anything at the technical inspection.
Printing:
Use PETG, or even better ABS. Infill should be at least 20% fast honeycomb, but rectilinear works as well. I used grey PETG, but the color doesn't matter.
Social media links:
https://www.instagram.com/n33sworkshop/
https://www.youtube.com/c/N33sWorkshop
You can leave a tip to support my work. Thanks" https://3dcarparts.org/library/1998/Ford/Focus/reverse-light-led-support https://r2-upload.3dcarparts.workers.dev/file/parts/9120cb42-7674-46ca-a595-3aa75694c982/images/reverse-light-led-support-1_1777607288604_zni3kv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1998/Ford/Focus/reverse-light-led-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bdc6d348-7942-4862-8420-a26c23da3d85 1998 Ford Focus / Fiesta Sun Visor Support Parametric version of the Sun Visor Support of djmarki to make it taller. https://3dcarparts.org/library/1998/Ford/Focus%20%2F%20Fiesta/sun-visor-support https://r2-upload.3dcarparts.workers.dev/file/parts/bdc6d348-7942-4862-8420-a26c23da3d85/images/sun-visor-support-1_1777607313044_xjj9xs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Ford/Focus%20%2F%20Fiesta/sun-visor-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-02cb31cc-e0e2-4b85-a719-5df0bc240f92 2000 Ford Focus Cup Holder Insert This is the passenger side cup holder. It had some trouble fitting larger cups. I've opened the base and the top up more than the original. It also includes modified side supports for a better fitment. This is for a 2000-2003 Ford Focus. https://3dcarparts.org/library/2000/Ford/Focus/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/02cb31cc-e0e2-4b85-a719-5df0bc240f92/images/cup-holder-insert-1_1777607311350_mxov6l.jpg in_stock 16.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Ford/Focus/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-43d7e841-da71-4cbf-86bc-34111436f51f 2011 Ford Focus Taillight Nut Turning Aid "For the plastic nut of the taillight bracket on the Ford Focus MK3, so that replacing a defective bulb is easy. Due to the narrow passage in the interior trim, loosening the plastic nut was only possible with pliers.
Printed in PETG with 20% infill." https://3dcarparts.org/library/2011/Ford/Focus/taillight-nut-turning-aid https://r2-upload.3dcarparts.workers.dev/file/parts/43d7e841-da71-4cbf-86bc-34111436f51f/images/taillight-nut-turning-aid-1_1777607286096_smv113.jpg in_stock 10.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2011/Ford/Focus/taillight-nut-turning-aid?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-73561b58-ab6e-4598-9dc5-81d2bfb5c0ef 2010 Ford Focus Wheel Center Hub Cover I've been missing one for years and finally decided to print one. I couldn't find a perfect fit, so I edited another that looked close in Tinkercad to fit. I don't recommend the purple-on-silver color scheme, but it seems to work! https://3dcarparts.org/library/2010/Ford/Focus/wheel-center-hub-cover https://r2-upload.3dcarparts.workers.dev/file/parts/73561b58-ab6e-4598-9dc5-81d2bfb5c0ef/images/wheel-center-hub-cover-1_1777607305372_2eh8ri.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Ford/Focus/wheel-center-hub-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2f22335e-665a-441f-b13c-1ae1acc328ff 2000 Ford Focus Fog Lamp Cover A simplified version of the fog light plug for a 2000 model car. https://3dcarparts.org/library/2000/Ford/Focus/fog-lamp-cover https://r2-upload.3dcarparts.workers.dev/file/parts/2f22335e-665a-441f-b13c-1ae1acc328ff/images/fog-lamp-cover-1_1777607300811_7xg16s.jpg in_stock 7.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Ford/Focus/fog-lamp-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0ff855ca-c982-4138-a705-f60bfd99bf97 2004 Ford Focus Wiper Arm Nut Cover Cap "I designed this wiper arm nut cover / cap for my (european) Ford Focus MK2, because I could not find any ready made STL files, with the correct dimensions.
Possibly works with Focus MK2.5 too.
I printed with 0.28 resolution, and 20% infill.
A bit tight to fit on the wiper arm's nut, but this will help to not loose it! :)" https://3dcarparts.org/library/2004/Ford/Focus/wiper-arm-nut-cover-cap https://r2-upload.3dcarparts.workers.dev/file/parts/0ff855ca-c982-4138-a705-f60bfd99bf97/images/wiper-arm-nut-cover-cap-1_1777607284912_xmd164.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Ford/Focus/wiper-arm-nut-cover-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b363e126-12bf-4a8b-9a0a-e41084fd34d7 2005 Ford Focus Cold Air Intake Snorkel Cold air adapter/snorkel for Focus mk2 Airbox conversion. https://3dcarparts.org/library/2005/Ford/Focus/cold-air-intake-snorkel https://r2-upload.3dcarparts.workers.dev/file/parts/b363e126-12bf-4a8b-9a0a-e41084fd34d7/images/cold-air-intake-snorkel-1_1777607274815_ell9j9.jpg in_stock 23.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2005/Ford/Focus/cold-air-intake-snorkel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-89237900-b3cf-423d-8077-a3f9eab5702a 2004 Ford Focus Mud Flap Clip "Bitcoin:
Thank for any donation!
I broke the original clip from the mud flap in my Ford Focus MK2 in heavy snow. I designed and printed a new one from PET-G and so far it works fine." https://3dcarparts.org/library/2004/Ford/Focus/mud-flap-clip https://r2-upload.3dcarparts.workers.dev/file/parts/89237900-b3cf-423d-8077-a3f9eab5702a/images/mud-flap-clip-1_1777607271933_jiy28a.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Ford/Focus/mud-flap-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1692dc8f-e165-4b30-a4ca-3f34afd5d2d1 2001 Ford Focus Sun visor mount It's a modification of the original visor of the Ford Focus 2001 https://3dcarparts.org/library/2001/Ford/Focus/sun-visor-mount https://r2-upload.3dcarparts.workers.dev/file/parts/1692dc8f-e165-4b30-a4ca-3f34afd5d2d1/images/sun-visor-mount-1_1777607270211_h1p6j3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Ford/Focus/sun-visor-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-38f1f8a5-53c4-402d-b881-6b828d690ab9 2005 Ford Focus Dash Vent Cover 2005-2007 Ford Focus Dash Vent Cover https://3dcarparts.org/library/2005/Ford/Focus/dash-vent-cover https://r2-upload.3dcarparts.workers.dev/file/parts/38f1f8a5-53c4-402d-b881-6b828d690ab9/images/dash-vent-cover-1_1777607263814_l3bn27.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Focus/dash-vent-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-87e64a98-e3cc-4cc4-9fbe-8192daa70d9e 2004 Ford Focus Engine Hood Rod Pivoting Support Ford Focus MK2 https://3dcarparts.org/library/2004/Ford/Focus/engine-hood-rod-pivoting-support https://r2-upload.3dcarparts.workers.dev/file/parts/87e64a98-e3cc-4cc4-9fbe-8192daa70d9e/images/engine-hood-rod-pivoting-support-1_1777607261941_44p2ok.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2004/Ford/Focus/engine-hood-rod-pivoting-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-47df7d5f-5d6e-425b-8d74-6bab5a363bb3 2011 Ford Focus Parcel Shelf Stud "This is a direct replacement for the stud that holds up the Parcel Shelf in the Mk3 Focus Hatchback. It should fit STs or whatever other hatchbacks. It should be a tighter fit than the OEM part, so it shouldn't fall out as easily as the OEM part, which is why I created this file. Because I lost one. And they're like 8 bucks for the string and stud, if you can find the rights ones.
I did mine on an SLA, they should work on any machine." https://3dcarparts.org/library/2011/Ford/Focus/parcel-shelf-stud https://r2-upload.3dcarparts.workers.dev/file/parts/47df7d5f-5d6e-425b-8d74-6bab5a363bb3/images/parcel-shelf-stud-1_1777607257133_awgboe.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/parcel-shelf-stud?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-977d793a-15c8-4a77-bf47-853938f89781 2008 Ford Focus Hub Cap "This is a replacement hub cap I re-designed for my 2008 Ford Focus. I printed it in two halves and super glued them together before installing into the rim.
I used supports, and was able to print it without any additional adhesion settings (I use bed weld all the time though)." https://3dcarparts.org/library/2008/Ford/Focus/hub-cap https://r2-upload.3dcarparts.workers.dev/file/parts/977d793a-15c8-4a77-bf47-853938f89781/images/hub-cap-1_1777607256016_8svoor.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Ford/Focus/hub-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8d2cb38f-4542-44d7-aa77-cd993c3db73c 2006 Ford Focus Shifter Button "The button on my focus broke. So I modeled a replacement.
Printed in ABS" https://3dcarparts.org/library/2006/Ford/Focus/shifter-button https://r2-upload.3dcarparts.workers.dev/file/parts/8d2cb38f-4542-44d7-aa77-cd993c3db73c/images/shifter-button-1_1777607253197_tn0ew4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Ford/Focus/shifter-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8129d84b-a13e-4e95-9cdf-5ba8f4577d95 2011 Ford Focus Glovebox Hinge Pin Glovebox pin for ford focus mk3 https://3dcarparts.org/library/2011/Ford/Focus/glovebox-hinge-pin https://r2-upload.3dcarparts.workers.dev/file/parts/8129d84b-a13e-4e95-9cdf-5ba8f4577d95/images/glovebox-hinge-pin-1_1777607251804_8o982d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/glovebox-hinge-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-28c23556-a830-4d46-bf0e-036519378761 2018 Jeep Wrangler Bungee Hook "Do you have a new Jeep JL? Do you like to hook bungees to things? Well here is a 3D model of the Spider Shade aluminum bungee hooks you can use to hook many different bungee items to. Items like cargo nets and ball bungees. Or rope.. what ever you can get around it I guess.
These are designed to screw into your roll cage. There are 5mm screws with cut outs all around the roll cage of your Jeep JL. Unscrew one out and reattach with the new holder." https://3dcarparts.org/library/2018/Jeep/Wrangler/bungee-hook https://r2-upload.3dcarparts.workers.dev/file/parts/28c23556-a830-4d46-bf0e-036519378761/images/bungee-hook-1_1777442948519_hx1506.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler/bungee-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9b1bcb72-b4ff-40bc-8ef4-ab52c3e74bca 1997 Jeep Wrangler Door Storage Hanger "This is my design for a Jeep Door Storage Hanger for those times when you want to leave your jeep doors at home. Other commercial and DIY designs rely on hanging the doors using the window frame which can damage your window seals. The alternative metal hanging brackets are expensive for what you get so I figured I would try to print something and see how it performs. Other than your filament (I use PETG for strength), you should be able to get all the additional parts for less than $15.
NOTE: photos are of my prototype, I removed a screw mounting hole from the base plate and rounded off the hangers to allow doors to swing open and closed when hung. New photos soon.
The multi-part design should allow these to work with both TJ and JK models as well as to allow for the replacement of the hangers over time if they wear. Simply print (2) bases and (4) hangers for each pair of doors. Snap the hangers into the base (the funnel side of the base is the top, the triangle ends of the hangers are the bottom). Join each hanger to a base by inserting a 3/8 lag bolt fed down from the top and secured with a nut on the bottom. Once you have assembled both bases measure the appropriate distance between the hangers to match your jeep doors and mount the bases to a stud on your wall. I incorporated a funnel to help guide the door hinge pins into place.
Additional parts:
- (4) 3/8 lag bolt, 4"" or longer
- (4) 3/8 nut
- (4) mounting screws to attach to studs
The optional door catches allow you to latch the door against the wall if you wish to prevent the doors from swinging out. You'll need (2) 3/8-16 Square U Bolt Clamps (with no mount plate) and (4) 3/8 nuts and (2) 3/8 washers. Attach a nut and washer to each clamp leg and spin to the top of the thread. Feed the clamps through the holes on the catch plate and secure on the back with the remaining two nuts. Tighten down from the front nuts to secure the u bolt to the catch plate.
Parts:
- (2) 3/8-16 Square U Bolt Clamps (with no mount plate)
- (4) 3/8 nuts
- (2) 3/8 washers.
- (4) mounting screws to attach to studs
To mount the door catches, place a door in the installed door hanger. Secure the side of the mounted U Bolt Clamp into a door latch, then swing the door shut toward the wall, marking where the door catch plate should be mounted. Use the diagonal slots to mount the plate (preferably to a stud). You can flip the plate 180 degrees if your stud is to the left or right. The slots should allow you to fine adjust the latch position if needed." https://3dcarparts.org/library/1997/Jeep/Wrangler/door-storage-hanger https://r2-upload.3dcarparts.workers.dev/file/parts/9b1bcb72-b4ff-40bc-8ef4-ab52c3e74bca/images/door-storage-hanger-1_1777442950588_p07ors.jpg in_stock 26.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1997/Jeep/Wrangler/door-storage-hanger?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a5041e45-602d-4f2c-b7d4-d741538c1c59 2007 Jeep Wrangler Tailgate Bar Retainer I bought a used soft top for my dad, but it did not come with these retainers. so I drew these up and printed them. the fit is pretty good. https://3dcarparts.org/library/2007/Jeep/Wrangler/tailgate-bar-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/a5041e45-602d-4f2c-b7d4-d741538c1c59/images/tailgate-bar-retainer-1_1777442942694_i80n1w.jpg in_stock 19.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/tailgate-bar-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dc33a3d4-6e4f-4978-8148-124868d07cdf 2007 Jeep Wrangler Subwoofer Bracket "Jeep JK Wrangler subwoofer bracket. This piece typically gets rusted in these vehicles.
Recommened printing in PETG to handle the temp swings." https://3dcarparts.org/library/2007/Jeep/Wrangler/subwoofer-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/dc33a3d4-6e4f-4978-8148-124868d07cdf/images/subwoofer-bracket-1_1777442942045_azivwo.jpg in_stock 9.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/subwoofer-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-69399aea-6f41-40d3-b2e8-5e497e2123e8 1997 Jeep Wrangler Center Console Tray "A tray for my 1997 TJ. I designed to print without supports. I put a small fillet on the under side of the lip to keep from needing support. Printed fine on my Prusa MK3 without supports.
A little on the tight side. I would partially print and check your fit. Then adjust down a couple percentages as needed." https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-tray-3 https://r2-upload.3dcarparts.workers.dev/file/parts/69399aea-6f41-40d3-b2e8-5e497e2123e8/images/center-console-tray-3-1_1777442940157_84eheo.jpg in_stock 21.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-tray-3?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5b7fb5a6-bc3e-494c-a937-0266c0f15322 2018 Jeep Wrangler Slim Can Cup Holder Adapter I drink the 12 oz monster slim cans once in a while and it sucked having it tip all the time when making turns. I came up with this design to keep it in place. it fits perfect in it, slides right in and no need to hold on to the adapter when taking the can out. https://3dcarparts.org/library/2018/Jeep/Wrangler/slim-can-cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/5b7fb5a6-bc3e-494c-a937-0266c0f15322/images/slim-can-cup-holder-adapter-1_1777442936654_872yme.jpg in_stock 27.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler/slim-can-cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9fdc7a8f-c0e7-441c-a173-28b304e56dc1 1997 Jeep Wrangler Removable Door Saver Clips This is a simple little clip for the bottom of my TJ doors. I snap them on just before removing the doors so I can set them on concrete or sand without damaging the paint. Be sure you wipe the dirt and grime off before using. They protect the bottom of your door from what you set your door on but if your door is dirty they will scratch it up. https://3dcarparts.org/library/1997/Jeep/Wrangler/removable-door-saver-clips https://r2-upload.3dcarparts.workers.dev/file/parts/9fdc7a8f-c0e7-441c-a173-28b304e56dc1/images/removable-door-saver-clips-1_1777442929624_s2av8a.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/removable-door-saver-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d3bb6014-8b58-4679-8e25-7359fdcff965 2007 Jeep Wrangler Fog Light Surrounds "So I gutted my original plastic bumper to put it onto a Winch Plate. By doing this I lost the depth needed for the factory Fog lights. I then went and bought a pair from my local store to replace them with, as they were not the same size, I made bigger holes for these to fit in.
There are 2 parts, the inner and outer part.
First, hold the inner part over the existing hole trace the outline of it, and cut the hole to size, then slide the inner part in, you don't need to glue anything as there are screws that will hold it together when the outer ring is slid over the light.
The new light will be going inside and the outer ring will keep this light in place. if you have any questions let me know.
I used a 5"" Fog light combo.
similar to this:
https://www.amazon.ae/LED-Moso-Waterproof-Driving-Warranty/dp/B07G91BY56/ref=sr_1_19?adgrpid=92969114572&dchild=1&gclid=CjwKCAjwrKr8BRB_EiwA7eFapsFWUdVc11Jrz8aVNcEJDgOSGZRP6lk0lGo3Y0vJNEYJMhCWA34suxoCyikQAvD_BwE&hvadid=409245238506&hvdev=c&hvlocphy=1000010&hvnetw=g&hvqmt=b&hvrand=11296311693359353677&hvtargid=kwd-306189938398&hydadcr=4398_1907357&keywords=offroad+lights+5+inch&qid=1603004602&sr=8-19&tag=googleaepcstd-21" https://3dcarparts.org/library/2007/Jeep/Wrangler/fog-light-surrounds https://r2-upload.3dcarparts.workers.dev/file/parts/d3bb6014-8b58-4679-8e25-7359fdcff965/images/fog-light-surrounds-1_1777442932081_1jub4w.jpg in_stock 16.42 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/fog-light-surrounds?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bcccade9-4ade-4fbe-ab52-2774f9f9c2f3 2011 Jeep Wrangler Shifter Bezel "Replacement for the stock chrome bezel. Match you exterior color, your outfit, your nails, your mood...
Editable on TInkercad at
https://tinkercad.com/things/aiucKHEf9M6-jeep-shifter-bezel" https://3dcarparts.org/library/2011/Jeep/Wrangler/shifter-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/bcccade9-4ade-4fbe-ab52-2774f9f9c2f3/images/shifter-bezel-1_1777442927714_ywg2iw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Jeep/Wrangler/shifter-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5c86ff85-a629-4158-b69e-8c4018e53234 2007 Jeep Wrangler Visor Mount "My Wrangler passenger side visor mount broke, and the only way to fix was to replace the mount and the visor.
Created in TinkerCAD." https://3dcarparts.org/library/2007/Jeep/Wrangler/visor-mount https://r2-upload.3dcarparts.workers.dev/file/parts/5c86ff85-a629-4158-b69e-8c4018e53234/images/visor-mount-1_1777442927205_b16esl.jpg in_stock 13.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/visor-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8213b500-c667-48be-ba51-a8882d7c31e4 2018 Jeep Wrangler Tazer Mini/Lite Mount "This mount is for the last-gen and current-gen of the Z Automotive Tazer Mini/Lite models. Can be printed in PLA but I recommend PETG or ABS due to the heat in the Jeep in the summer.
No supports are needed." https://3dcarparts.org/library/2018/Jeep/Wrangler/tazer-minilite-mount https://r2-upload.3dcarparts.workers.dev/file/parts/8213b500-c667-48be-ba51-a8882d7c31e4/images/tazer-minilite-mount-1_1777442927598_uolfs4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2018/Jeep/Wrangler/tazer-minilite-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-251c6f63-c432-4762-a297-972805e34d5d 2018 Jeep Wrangler JL / Gladiator JT Sun Visor Reinforcement Clip "If you have a 2018 or newer Jeep Wrangler JL or Gladiator JT, you will experience this issue. The sun visors are held on with a cheesy plastic clip and they will break and the visor will randomly fall in your face at the most inopportune moments. Just print 2 of these, remove the 2 screws near the visor mount (T-20 Torx bit required) and install these. Just need to replace the original screws with longer ones, I'm not sure of the exact size, I just found some in my garage that fit.
These can be installed even if yours hasn't broken yet, to reinforce the crappy OEM part.
I printed with Carbon Fiber reinforced PLA. PLA+ or PETG will probably hold up well. Time will tell, if they break, I will just print more. But there isn't much force on them, so they should last a while.
UPDATE: 6/13/22 - The PLA with CF has deformed significantly with the summer heat in TX. Other tests show that PETG cannot handle the heat either. I have reprinted with ABS and will report back with the findings, but so far other tests are showing positive results." https://3dcarparts.org/library/2018/Jeep/Wrangler%20JL%20%2F%20Gladiator%20JT/sun-visor-reinforcement-clip https://r2-upload.3dcarparts.workers.dev/file/parts/251c6f63-c432-4762-a297-972805e34d5d/images/sun-visor-reinforcement-clip-1_1777442927441_cgxp68.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler%20JL%20%2F%20Gladiator%20JT/sun-visor-reinforcement-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3c9c3633-365f-4b0d-a717-0d6fb943fb5c 2007 Jeep Wrangler Turn Signal Cover This turn signal cover was made specifically for https://www.amazon.com/Wrangler-2007-2017-Signals-Driving-Parking/dp/B07KTYJNHX/ref=sr_1_3?ie=UTF8&qid=1548622050&sr=8-3&keywords=jk+halo+turn+signal the ring of the star matches up with the halo ring. https://3dcarparts.org/library/2007/Jeep/Wrangler/turn-signal-cover https://r2-upload.3dcarparts.workers.dev/file/parts/3c9c3633-365f-4b0d-a717-0d6fb943fb5c/images/turn-signal-cover-1_1777442923839_eoxhm0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2007/Jeep/Wrangler/turn-signal-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c5e2782-949f-45eb-9919-d85c680c28ea 1997 Jeep Wrangler Floor Drain Plugs Printed in TPU or PLA with low density. Easy and inexpensive solution for damaged or missing floor drain plugs. I keep a couple extras in the box in case I need to pull one and damage it. https://3dcarparts.org/library/1997/Jeep/Wrangler/floor-drain-plugs https://r2-upload.3dcarparts.workers.dev/file/parts/2c5e2782-949f-45eb-9919-d85c680c28ea/images/floor-drain-plugs-1_1777442921167_5eblv8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/floor-drain-plugs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3cd68c4b-c6ae-459e-826a-60576821f176 2014 Jeep Wrangler Coin Tray Wanted a deeper tray for the Coin/ Junk Holder in my 2014 JK Manuel. https://3dcarparts.org/library/2014/Jeep/Wrangler/coin-tray https://r2-upload.3dcarparts.workers.dev/file/parts/3cd68c4b-c6ae-459e-826a-60576821f176/images/coin-tray-1_1777442915556_woxvaf.jpg in_stock 18.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Jeep/Wrangler/coin-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c179f337-eb17-4e7b-8cf5-328aaa0892f1 1991 Jeep Wrangler AC Fan Knob This is as close to a 1:1 factory jeep ac knob, designed off my 91' wrangler https://3dcarparts.org/library/1991/Jeep/Wrangler/ac-fan-knob https://r2-upload.3dcarparts.workers.dev/file/parts/c179f337-eb17-4e7b-8cf5-328aaa0892f1/images/ac-fan-knob-1_1777442913141_dcnf4s.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Jeep/Wrangler/ac-fan-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-64268485-9e8b-4bff-ac2f-6598db7b539c 2018 Jeep Wrangler Fender Clip "This is a useable fender clip to replace the clips that naturally break every time that you pull the fender off of your 2018+ Jeep JL Wrangler.
I suggest printing this in a strong and high temperature material, not PLA. I printed mine in PETG. I also used a horizontal expansion of -0.2 (found under the shell settings in Cura) to make sure that I had very clean spacing.
This is a remix of the JK design to reduce the size of the center support pin to fit in the slots of the JL Wrangler's fenders.
There are two versions, one that is the full clip. This one will require a raft and supports to print. I found that removing the supports tended to destroy 50% of the prints and left the edges looking bad. The other, I rotated and removed the bottom portion of the clip so that it can print as-is without supports or adhesion help.
I modified the original version in Tinkercad. Feel free to continue my work there....
https://www.tinkercad.com/things/8kl12vJvaZh-tremendous-amur/edit?sharecode=9WcZqMKbzhmJW60IvATBwMqJEhrcp3aFDHIVL3JvS_Q" https://3dcarparts.org/library/2018/Jeep/Wrangler/fender-clip-2 https://r2-upload.3dcarparts.workers.dev/file/parts/64268485-9e8b-4bff-ac2f-6598db7b539c/images/fender-clip-2-1_1777442913025_nvdd71.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2018/Jeep/Wrangler/fender-clip-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1db32f71-d263-472d-811c-8b29bf8be1d9 2018 Jeep Wrangler Auxiliary Switch Panel "A simple switch panel design for Jeep Wrangler JL (18+) w/o electric windows using 4x19mm switch and one rocker switch (In my case use as the main power)
The little rubber mat needs to be removed for the panel to fit in." https://3dcarparts.org/library/2018/Jeep/Wrangler/auxiliary-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/1db32f71-d263-472d-811c-8b29bf8be1d9/images/auxiliary-switch-panel-1_1777442908952_s3xfbc.jpg in_stock 11.80 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler/auxiliary-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6a32f33a-2112-4c06-b45d-f413b5daef9f 1987 Jeep Wrangler Floor Drain Plug Flexible floorplug for Jeep YJ (and other wrangler models with 25mm drain holes). https://3dcarparts.org/library/1987/Jeep/Wrangler/floor-drain-plug https://r2-upload.3dcarparts.workers.dev/file/parts/6a32f33a-2112-4c06-b45d-f413b5daef9f/images/floor-drain-plug-1_1777442911019_ghv7aj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Jeep/Wrangler/floor-drain-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c9bcf1d5-78ee-446f-8fe2-dc49f3607b33 1997 Jeep Wrangler Door Switch Conversion Nut "This is the adapter nut to convert the door switches on a Jeep Wrangler TJ to use Mercedes part number 2018202110 switches.
https://youtu.be/RfnhaBNAVuA
Or buy some here out of ASA: https://www.etsy.com/listing/1807977381/the-best-dome-light-modification-for-no" https://3dcarparts.org/library/1997/Jeep/Wrangler/door-switch-conversion-nut https://r2-upload.3dcarparts.workers.dev/file/parts/c9bcf1d5-78ee-446f-8fe2-dc49f3607b33/images/door-switch-conversion-nut-1_1777442909388_z75q0z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/door-switch-conversion-nut?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f70e13fd-326b-4b53-8b84-1901aabfc228 1997 Jeep Wrangler Rear Bumper Endcap "Better Endcaps for the Jeep Wrangler TJ.
It should fit on the 97-2006 model.
I dont know if there are differences between the US and European version but that one should fit perfectly on the European model on the stock rear bumper.
Finaly you need to print 2 Endcaps and some screws to fix it." https://3dcarparts.org/library/1997/Jeep/Wrangler/rear-bumper-endcap https://r2-upload.3dcarparts.workers.dev/file/parts/f70e13fd-326b-4b53-8b84-1901aabfc228/images/rear-bumper-endcap-1_1777442910259_fkv27b.jpg in_stock 18.82 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/rear-bumper-endcap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ee626fcc-8759-4e5e-b847-3b4e27eb7649 2007 Jeep Wrangler Triple Dash RAM Mount Triple RAM mount for the Jeep Wrangler top dash https://3dcarparts.org/library/2007/Jeep/Wrangler/triple-dash-ram-mount https://r2-upload.3dcarparts.workers.dev/file/parts/ee626fcc-8759-4e5e-b847-3b4e27eb7649/images/triple-dash-ram-mount-1_1777442909540_p94zel.jpg in_stock 21.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/triple-dash-ram-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a700396d-1dd0-43a8-ab08-87718d19ddb8 2006 Jeep Wrangler Floor Drain Plugs "I recently purchased a 2006 Jeep Wrangler LJ. In my DIY quest to restore it, I'm using my 3D printer where I can to help print parts.
The floor drain plugs are all missing, so I thought this would be a great use-case for TPU filament! I designed the plugs to fit snugly and securely in the drain holes. They are thick enough to give them good rigidity and durability." https://3dcarparts.org/library/2006/Jeep/Wrangler/floor-drain-plugs https://r2-upload.3dcarparts.workers.dev/file/parts/a700396d-1dd0-43a8-ab08-87718d19ddb8/images/floor-drain-plugs-1_1777442904742_lrw2jq.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Jeep/Wrangler/floor-drain-plugs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-812ed478-1ea6-4daa-b921-d679a80e7d16 1997 Jeep Wrangler Tailgate Spare Tire Spacer "After putting on a new spare tire carrier, my wheels were no longer touching the rubber bumpers attached to the tailgate. I made these to help correct that. They are spaced to fit my 33"" tires. I can upload other STL files for you if your measurements are different.
You can print four of the basic shapes, or a few of the offset shapes to better fit your contact area. I ended up using two of each. I did not bother with the fifth lower bumper because my tire rests solidly on the actual bumper.
edit: Still working on an offset design to clear the tailgate bracket." https://3dcarparts.org/library/1997/Jeep/Wrangler/tailgate-spare-tire-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/812ed478-1ea6-4daa-b921-d679a80e7d16/images/tailgate-spare-tire-spacer-2_1777442903671_8gue9g.jpg in_stock 25.47 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/tailgate-spare-tire-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-67f48d26-4e79-4f80-8bb7-49fae4d9d0a0 2007 Jeep Wrangler Inner Fender Screw Screw for the front inner fender of the Jeep Wrangler JK https://3dcarparts.org/library/2007/Jeep/Wrangler/inner-fender-screw-2 https://r2-upload.3dcarparts.workers.dev/file/parts/67f48d26-4e79-4f80-8bb7-49fae4d9d0a0/images/inner-fender-screw-2-1_1777442906463_disnn9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/inner-fender-screw-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c65a2446-0b88-4bb7-a70a-cff0af341527 1987 Jeep Wrangler Dashboard Mount "Inspired by brotherjethro's ""iPhone 6 mount for Jeep Wrangler YJ"" (http://www.thingiverse.com/thing:1148280), this is a series of mounts that you can use to mount different things to the dashboard of a Jeep YK without drilling any holes.
Included in this Thing are three different versions, each can be used for different purposes. I have included the SKP files (Sketchup) so you can do with it as you please." https://3dcarparts.org/library/1987/Jeep/Wrangler/dashboard-mount https://r2-upload.3dcarparts.workers.dev/file/parts/c65a2446-0b88-4bb7-a70a-cff0af341527/images/dashboard-mount-1_1777442906032_39pj3f.jpg in_stock 20.84 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Jeep/Wrangler/dashboard-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-63fc72c7-981e-47c0-bb01-14e8e270fbfa 2007 Jeep Wrangler Door Handle Insert Trim "These are the inserts that go across the front of the door handles on 07-2011 Jeep JK's. I have an 08 JKU (Rubicon). They turned out pretty good and fit well.
Next round, i plan to increase the infill so that the screws don't dig in so much, but so far they look and hold great. I took a rubber mallet to pound the letters in place once i had them seated a bit. I but them on the jeep with a piece of cardboard and vise grips so it didn't scratch anything. this held them in place while i drilled the holes that the screws go in. I had amazon bought inserts before, so i just reused the screws. I suppose you could 3M tape them in place and not drill, BUT... they would have to be heated up and bent, since the handles have a slight arc to them. I find screwing them down, bends them naturally and doesn't require extra nonsense/work. and they don't pop off magically over time. My other ones have been on for several years with no issues. through trails, creeks and mud. My Jeep theme is Storm Trooper/Dark Side. So if you love Star Wars and Jeeps like I do, then this is for you!" https://3dcarparts.org/library/2007/Jeep/Wrangler/door-handle-insert-trim https://r2-upload.3dcarparts.workers.dev/file/parts/63fc72c7-981e-47c0-bb01-14e8e270fbfa/images/door-handle-insert-trim-1_1777442903185_5kcnzj.jpg in_stock 21.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/door-handle-insert-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1164c8b6-02ca-445a-a3d1-f5c6769c2828 1997 Jeep Wrangler Rocker Switch Panel do what you want with it, just sharing my old files since ive sold the vehicle :) no real way of fixating/screw it in place, i used seperate tools/material for that https://3dcarparts.org/library/1997/Jeep/Wrangler/rocker-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/1164c8b6-02ca-445a-a3d1-f5c6769c2828/images/rocker-switch-panel-1_1777442898582_q3hlqs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/rocker-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f8584b8c-9019-4190-94ad-393fb66da6e6 2014 Jeep Wrangler Phone Cradle "This phone cradle sits in the dashboard tray of my 2014 Jeep Wrangler and holds my Razer Phone 2 with the [case I created](https://www.thingiverse.com/thing:3488384).
This was quite useful on my recent road trip." https://3dcarparts.org/library/2014/Jeep/Wrangler/phone-cradle https://r2-upload.3dcarparts.workers.dev/file/parts/f8584b8c-9019-4190-94ad-393fb66da6e6/images/phone-cradle-1_1777442877945_hi29fn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Jeep/Wrangler/phone-cradle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-575a7f6f-28c2-4e34-9ccb-b05aae1a1884 2018 Jeep Wrangler 17mm Ball Phone Mount I didn't like how high my phone was sitting, so I modified BunnyTJ's mount to add a 17mm ball. Works perfect with a cheap Amazon Magnetic phone charger (https://www.amazon.com/dp/B0CYC8HHST). https://3dcarparts.org/library/2018/Jeep/Wrangler/17mm-ball-phone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/575a7f6f-28c2-4e34-9ccb-b05aae1a1884/images/17mm-ball-phone-mount-1_1777442871694_axuagq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler/17mm-ball-phone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e2559a43-9cdd-46e1-a863-c767e89cbd19 2007 Jeep Wrangler Magnetic Dashcam Mount "Have a quick changing dashcam with no tools needed.
The Mobius (v1) dashcam will slide in and out of the base, in which both the camera and the base are magnetically mounted (the camera magnetically clings to the base, and the base magnetically clings to a bolt). This allows for quickly stashing you dashcam if you're parking with the top down or similar. I also built it so it won't interfere with the sunvisor.
The base has a star pattern, so you can angle the direction of the camera as necessary.
Requirements:
- Print the 2 models in PETG, since we need heat resistance!
- You'll need 3 magnets, of type 12mm x 5mm N35 Super Strong Round Disc Rare Earth Neodymium Magnets. I bought mine here: https://www.umagnets.com/p/round-magnet-n50-12mm-x-5mm-nickel-plated/
- Super glue to glue them in with
- A mobius v1 action cam
- The Mobius actioncam mount/cradle that came with the device.
Install:
Glue the magnets in, make sure the polarities are the right direction first by test fitting! Add the printed adapter to the cradle that came with the device. Run a dash cam wire up the post, and mount. Tada!" https://3dcarparts.org/library/2007/Jeep/Wrangler/magnetic-dashcam-mount https://r2-upload.3dcarparts.workers.dev/file/parts/e2559a43-9cdd-46e1-a863-c767e89cbd19/images/magnetic-dashcam-mount-1_1777442874186_g3d0vo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/magnetic-dashcam-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ceb4cd85-6b9f-4f9d-96de-efd93f1f4fd3 2000 Jeep Wrangler Rear Bench Seat Floor Foot "Replacement feet for the rear seat in a 2000 Jeep Wrangler Sport (and other models with the same style bench seat)
The print expects reuse of the hardware from the existing seats. I used the same washer and screw. The washer is embedded in the print.
This part is modeled as an exact replica of the existing part." https://3dcarparts.org/library/2000/Jeep/Wrangler/rear-bench-seat-floor-foot https://r2-upload.3dcarparts.workers.dev/file/parts/ceb4cd85-6b9f-4f9d-96de-efd93f1f4fd3/images/rear-bench-seat-floor-foot-1_1777442870076_ggd16l.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Jeep/Wrangler/rear-bench-seat-floor-foot?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9b84a1b8-203c-4990-9571-1cc3c35e2b09 2018 Jeep Wrangler JL/JLU / Gladiator JT Dual Battery G-Screen Mount "This 3D printed mount is designed to fit a 2018+ Jeep Wrangler JL, JLU and Gladiator JT. It is designed to allow a snap fit of the Genesis Dual Battery G-Screen. It is a press-fit into the vehicle trim.
It mounts to the vehicle trim just to the left of the programmable garage door button interface. I ran into interference conditions on my vehicle after cutting a hole in the trim to fit this module. This pushes the G-Screen module out of the vehicle trim 1/4"" to ensure clearance to the bracket that the front drivers side removeable hard top section locks into. Feel free to reach out with any questions or concerns.
https://www.jlwranglerforums.com/forum/threads/genesis-off-road-dual-battery-kit.5422/page-18" https://3dcarparts.org/library/2018/Jeep/Wrangler%20JL%2FJLU%20%2F%20Gladiator%20JT/dual-battery-g-screen-mount https://r2-upload.3dcarparts.workers.dev/file/parts/9b84a1b8-203c-4990-9571-1cc3c35e2b09/images/dual-battery-g-screen-mount-1_1777442869308_o8vbmv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler%20JL%2FJLU%20%2F%20Gladiator%20JT/dual-battery-g-screen-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-906edf79-78a8-44b1-af10-cf60b4c544e2 1998 Jeep Wrangler Climate Control Knob "This Knob will fit a 1998-2000 (and possibly other years I'm not quite
sure) Jeep Wrangler. If printed at a high infill it will not break, and will
stick onto the metal knob in the car very well." https://3dcarparts.org/library/1998/Jeep/Wrangler/climate-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/906edf79-78a8-44b1-af10-cf60b4c544e2/images/climate-control-knob-1_1777442868647_1q8kmm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Jeep/Wrangler/climate-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-df071ebf-283f-4922-bf63-2ea39b03d870 1987 Jeep Wrangler Center Cap Center cap for the stock wheels that came on a YJ Jeep Wrangler. I have not printed this version yet, but I printed the prototype before this one and made the necessary changes that I saw. Will update when I get around to trying them out. Any feedback is greatly appreciated! https://3dcarparts.org/library/1987/Jeep/Wrangler/center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/df071ebf-283f-4922-bf63-2ea39b03d870/images/center-cap-1_1777442861569_v183mc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1987/Jeep/Wrangler/center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-621edfa0-7ff1-4ab0-bd72-389822ca3e24 1987 Jeep Wrangler Cup Holder "Cup Holder designed for windshield mounting on Jeep YJ's. It does require Supports I used Cura experimental tree support to save time and filament.
A few things as I develop this:
1. In its current state the full cup holder is pretty thin.
2. The support system is a pain in the rear to remove
3. It does fit and work for travel style mugs. Until I upload version 2, I have removed the bottom system to hold my travel mugs through more a a pressure method.
v2: skinny sidewalls
v2.1: Adjusted sidewall width
**Version 2 is currently printing. I have added the STL file**
I am modifying the design to be thicker and will add a cleaner version of the pressure method." https://3dcarparts.org/library/1987/Jeep/Wrangler/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/621edfa0-7ff1-4ab0-bd72-389822ca3e24/images/cup-holder-1_1777442870070_k5vem6.jpg in_stock 17.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Jeep/Wrangler/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2d38fb3d-be89-4eb7-8fd4-d4e87d88f120 2012 Jeep Wrangler Engine Cover Grommet Replacement engine cover grommet for Jeep JK 2012-2016'ish. https://3dcarparts.org/library/2012/Jeep/Wrangler/engine-cover-grommet https://r2-upload.3dcarparts.workers.dev/file/parts/2d38fb3d-be89-4eb7-8fd4-d4e87d88f120/images/engine-cover-grommet-1_1777442857867_pkl0w1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2012/Jeep/Wrangler/engine-cover-grommet?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ef98cbdf-a29f-4c1a-b4e3-574949a5259a 2021 Jeep Wrangler Knob Cover This is an aesthetic knob cover for the 2021 Jeep Wrangler. https://3dcarparts.org/library/2021/Jeep/Wrangler/knob-cover https://r2-upload.3dcarparts.workers.dev/file/parts/ef98cbdf-a29f-4c1a-b4e3-574949a5259a/images/knob-cover-1_1777442861009_gatw30.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2021/Jeep/Wrangler/knob-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c5c3ab28-e5e9-4226-b30b-754d21690f79 1999 Jeep Wrangler HVAC Heater Control Knob "Own a 1997, 1999, & 2001 Jeep Wranglers. Every couple years I'll have a knob break during a really cold winter day when I try to use them, so I decided to make my own!
Dimensions taken directly from OEM Jeep Wrangler knobs, using a set of vernier calipers and some good old fashion best guesses.
Each jeep has at least 1 knob at this point, put spares in each in case they ever give out!" https://3dcarparts.org/library/1999/Jeep/Wrangler/hvac-heater-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/c5c3ab28-e5e9-4226-b30b-754d21690f79/images/hvac-heater-control-knob-1_1777442858758_boyia7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Jeep/Wrangler/hvac-heater-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e667f5de-526d-4ada-aab6-99673577eab8 1997 Jeep Wrangler Sun Visor Clip My old TJ sunvisor clips weren't holding the visor anymore, so I designed these with latches: push up the latch to remove the sunvisor. Push down the latch to lock the sunvisor in place. https://3dcarparts.org/library/1997/Jeep/Wrangler/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e667f5de-526d-4ada-aab6-99673577eab8/images/sun-visor-clip-1_1777442855524_w6a37r.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ff952798-7ee1-43cc-9f58-9f082347103f 1997 Jeep Wrangler Door handle screw mount repair plate This is a quick fix for the door handle that has broken around the screw mount. You can use the original screw too. https://3dcarparts.org/library/1997/Jeep/Wrangler/door-handle-screw-mount-repair-plate https://r2-upload.3dcarparts.workers.dev/file/parts/ff952798-7ee1-43cc-9f58-9f082347103f/images/door-handle-screw-mount-repair-plate-1_1777442852897_2h92y7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/door-handle-screw-mount-repair-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e461dc16-90ef-4bcc-891a-ce41c1cdfd95 2007 Jeep Wrangler Shifter Knob "Replacement shifter knobs for Jeep Wrangler (JK)
Modeled based on an MK-2 Grenade (Transmission) and an M67 Grenade (Transfer Case)
To remove stock shifters, while in neutral pull hard and then twist a bit. Watch your elbows.
Printed sideways and used rafts and supports for the top/ handle.
May require some sanding and drilling to fit all parts.
Used a cotter pin and keyring for the pin. Zip tied together to reduce rattling.
Painted then super-glued together. Hot glued in place for easy removal
I thought the transfer case shifter cylinder that connected the body to the top/ handle looked small. So I snapped the square post off and glued the adapter in place for a bigger look." https://3dcarparts.org/library/2007/Jeep/Wrangler/shifter-knob-2 https://r2-upload.3dcarparts.workers.dev/file/parts/e461dc16-90ef-4bcc-891a-ce41c1cdfd95/images/shifter-knob-2-1_1777442857067_knd4z3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/shifter-knob-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-832db0ed-12f3-43da-ae80-6e5067d25a0c 1997 Jeep Wrangler Side Vent This is not my creation but I don't recall who's stl I pulled down for this. It provides an excellent solution for a broken TJ side vent. Printed in PETG and has held up without deformation. https://3dcarparts.org/library/1997/Jeep/Wrangler/side-vent https://r2-upload.3dcarparts.workers.dev/file/parts/832db0ed-12f3-43da-ae80-6e5067d25a0c/images/side-vent-1_1777442856436_sr1jfs.jpg in_stock 10.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/side-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2cdec2eb-eb44-4678-98dc-4f1b10366e9d 1987 Jeep Wrangler Battery Hold Down Clamp "If you ever need to replace your YJ battery, upgrade to a Group 65 - it fits perfectly in the existing tray. All you need is a longer hold down clamp unless yours is flat all the way across (mine had little L brackets welded on that would only fit the original battery width). I was going to just buy a generic one on Amazon but it seems that this size battery is not super common and the universal/adjustable ones just look dumb. Besides, you have a printer, why not just make your own for like $2?
I printed this in PA6-CF because it's what I had on hand and I was worried about heat and chemical resistance. I imagine ABS/ASA would be fine as well. PETG might be okay but I imagine it would warp over time.
Presumably this same clamp would work on other applications that use a group 65 battery (7.5"" wide) and 1/4"" hold down studs." https://3dcarparts.org/library/1987/Jeep/Wrangler/battery-hold-down-clamp https://r2-upload.3dcarparts.workers.dev/file/parts/2cdec2eb-eb44-4678-98dc-4f1b10366e9d/images/battery-hold-down-clamp-1_1777442848824_0bb0nn.jpg in_stock 19.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1987/Jeep/Wrangler/battery-hold-down-clamp?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9de71d9e-615a-4020-b535-fc299f14a5da 2007 Jeep Wrangler Hands-Free Microphone Holder "I replaced the head unit in my JK Wrangler and the auto electrician just stuck a microphone in front of the speedo. I decided to removed the stock UConnect Mic and run the new mic wiring up the pillar and put it in the same place. Here is a simple mount for a 14mm diameter microphone.
I have also added a more simple, squared version." https://3dcarparts.org/library/2007/Jeep/Wrangler/hands-free-microphone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/9de71d9e-615a-4020-b535-fc299f14a5da/images/hands-free-microphone-holder-1_1777442844211_5h08zn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/hands-free-microphone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3a68d29f-97e4-4ee3-8b22-2d6c94b9090d 1987 Jeep Wrangler Console Cup Holder Insert "If you have a YJ Jeep Wrangler with the original console, then you know the struggle is real when trying to drive, shift and hold onto your monster fountain drink. But now that doesn't need to be a struggle of needing a third hand and spilled Mountain Dew.
I created this insert for the console that will hold a giant drink as well as your phone and even miscellaneous small items.
Be warned that this print it big. The item itself weighs 12.05oz or 0.342kg, even with lots of hollow areas and only 10% infill.
Also there is allot of support needed. I found the NORMAL support works (tree support not so much)
It will use 440g of material total as it sits.
But what if your drink isn't that big, I got you covered. There are a few prints on my page that will nest into the cup holder to scale it down. They will accommodate a smaller fountain, 12oz soda can (or 16oz monster) or 20oz soda bottles." https://3dcarparts.org/library/1987/Jeep/Wrangler/console-cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/3a68d29f-97e4-4ee3-8b22-2d6c94b9090d/images/console-cup-holder-insert-1_1777442848965_cv1955.jpg in_stock 39.83 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Jeep/Wrangler/console-cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-89d797a7-f08a-4d43-85c5-aaab7740fe03 2024 Jeep Wrangler Trash Can "I have a Jeep Wrangler with a spacious area under the armrest, which I thought would be perfect for a small trash can. This trash can occupies about half of the available space under the armrest, allowing me to still store items in the remaining half. While it is a bit tall and could be reduced by about 5-10mm for a better fit, it still fits well, and the armrest closes without any issues.
This trash can definitely fits my 2024 Jeep Wrangler JL Unlimited, but I'm uncertain if it will fit other models." https://3dcarparts.org/library/2024/Jeep/Wrangler/trash-can https://r2-upload.3dcarparts.workers.dev/file/parts/89d797a7-f08a-4d43-85c5-aaab7740fe03/images/trash-can-1_1777442841406_0n4yz6.jpg in_stock 28.40 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2024/Jeep/Wrangler/trash-can?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-986633d4-bacb-46f2-87f9-71c5b5e2478e 2002 Jeep Wrangler Console Tray Center console tray for 2002 Jeep Wrangler. https://3dcarparts.org/library/2002/Jeep/Wrangler/console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/986633d4-bacb-46f2-87f9-71c5b5e2478e/images/console-tray-1_1777442838657_p99bcu.jpg in_stock 26.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Jeep/Wrangler/console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-164cb7e0-51f1-41e9-b480-9b286ddd2828 1997 Jeep Wrangler Pod Light Mount "Fits a Jeep TJ Wrangler 1997-2006, for mounting pod lights on your windshield frame.
You will need some longer 5/16-18 bolts
I uploaded the Fusion .f3d file so you can edit the top bolt holes to fit your needs, as well as the version I made for myself for my 2 pod lights and one with a single centered hole.
Mirror the x-axis in your slicer for passenger side.
So far I just printed in PLA at 100% infill, and it seems solid. You need high infill for the compressive strength when you bolt it. (or I've read high wall count might work better, but I haven't tried it)
Of course you probably need to print it in PETG, ABS, or ASA, etc. for it to last when it gets hot.
Credit to Guyaros JEEP Wrangler TJ Grill keychain for the TJ grill I used as a gusset." https://3dcarparts.org/library/1997/Jeep/Wrangler/pod-light-mount https://r2-upload.3dcarparts.workers.dev/file/parts/164cb7e0-51f1-41e9-b480-9b286ddd2828/images/pod-light-mount-1_1777442840843_akrd20.jpg in_stock 25.65 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/Jeep/Wrangler/pod-light-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-95a20336-61ca-42ac-aaec-c98c320cfb90 2007 Jeep Wrangler Arm Rest Console Buttons "Replacement buttons for the arm rest box / console box of the Jeep Wrangler JK. Fits perfectly and does not slide out due to friction.
Part number: 68359329AA" https://3dcarparts.org/library/2007/Jeep/Wrangler/arm-rest-console-buttons https://r2-upload.3dcarparts.workers.dev/file/parts/95a20336-61ca-42ac-aaec-c98c320cfb90/images/arm-rest-console-buttons-1_1777442839383_80tpm9.jpg in_stock 7.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/arm-rest-console-buttons?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f2ec8d27-db2b-4038-9f49-3b64d58b8eb0 2018 Jeep Wrangler Roll Cage Flashlight Charger Mount "I wanted to Mount my Streamlight Stinger charger in my Jeep on the roll cage. I came up with this design so that I could mount it by the cigarette plug in the back cargo space.
This design is my first draft, I plan on making improvements along the way. The one I printed for now is PLA at 15% infill but I plan on making it in ABS after I get the design perfected.
I used the screws that come with the charger to mount it to the printed piece and M8 1.25 bolts from amazon to mount to the Jeep roll cage. These bolts use the same Torx head so the tool kit provided with the Jeep can be used to install.
I used this streamlight charger:
https://www.amazon.com/dp/B06X9FNTLQ?ref=ppx_yo2ov_dt_b_product_details&th=1
Streamlight charging cable:
https://www.amazon.com/dp/B001CBVM12?psc=1&ref=ppx_yo2ov_dt_b_product_details
Bolts:
https://www.amazon.com/dp/B0C4TH27QP?psc=1&ref=ppx_pop_dt_b_asin_title" https://3dcarparts.org/library/2018/Jeep/Wrangler/roll-cage-flashlight-charger-mount https://r2-upload.3dcarparts.workers.dev/file/parts/f2ec8d27-db2b-4038-9f49-3b64d58b8eb0/images/roll-cage-flashlight-charger-mount-1_1777442834008_n62eni.jpg in_stock 21.57 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2018/Jeep/Wrangler/roll-cage-flashlight-charger-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4b7ac8af-bb25-4a1e-9fbb-b8f5e00d8d6d 1989 Jeep Wrangler Trip Meter Reset Knob Push knob for trip meter with blade style actuator. Designed for 1989 Jeep Wrangler Laredo YJ https://3dcarparts.org/library/1989/Jeep/Wrangler/trip-meter-reset-knob https://r2-upload.3dcarparts.workers.dev/file/parts/4b7ac8af-bb25-4a1e-9fbb-b8f5e00d8d6d/images/trip-meter-reset-knob-1_1777442832828_toiwa1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Jeep/Wrangler/trip-meter-reset-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-774e273f-b241-4ef4-a657-86c63365f526 1997 Jeep Wrangler Center Vent This is not my creation but I don't recall who's stl I pulled down for this. It provides an excellent solution for a broken TJ center vent. Printed in PETG and has held up without deformation. https://3dcarparts.org/library/1997/Jeep/Wrangler/center-vent https://r2-upload.3dcarparts.workers.dev/file/parts/774e273f-b241-4ef4-a657-86c63365f526/images/center-vent-1_1777442838495_nmoag6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ecb7a136-9b48-4c5b-91c3-4457271aa582 2007 Jeep Wrangler Inner Fender Screw Screw for the front inner fender of the Jeep Wrangler JK https://3dcarparts.org/library/2007/Jeep/Wrangler/inner-fender-screw https://r2-upload.3dcarparts.workers.dev/file/parts/ecb7a136-9b48-4c5b-91c3-4457271aa582/images/inner-fender-screw-1_1777442831225_2s4tp9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/inner-fender-screw?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-17066a91-89cd-452e-ab62-7ad141efeebd 1989 Jeep Wrangler Rear Seat Cup Holder Fit for 1989 Jeep Wrangler YJ , may fit others. Secures with 3M dual lock to tub side. Nice big cup/water bottle/mug holder for the back seat. https://3dcarparts.org/library/1989/Jeep/Wrangler/rear-seat-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/17066a91-89cd-452e-ab62-7ad141efeebd/images/rear-seat-cup-holder-1_1777442828343_p64w85.jpg in_stock 65.78 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Jeep/Wrangler/rear-seat-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7c30a306-7043-441b-beec-5b3be6bd20cc 2018 Jeep Wrangler Sun Visor Reinforcement "After the summer break, I came home to broken sun visors, could not find a reinforcement that was cheap enough so I hopped on Fusion360 and designed one from others I saw online.
After a few test prints, I came up with this. I did remix it from another file here to adapt it for what I wanted." https://3dcarparts.org/library/2018/Jeep/Wrangler/sun-visor-reinforcement https://r2-upload.3dcarparts.workers.dev/file/parts/7c30a306-7043-441b-beec-5b3be6bd20cc/images/sun-visor-reinforcement-1_1777442824082_n9dyel.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler/sun-visor-reinforcement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5062807d-e2fb-4db4-bc0f-ef13ed6418d6 2017 Jeep Wrangler Vent Ring "@Ericad needed just the ring to personalise it. Have fun!
It's a derivative of https://www.thingiverse.com/thing:6860115 so it should print upside down, but also has the issue with fragile hooks.
All the main work was done by elfving on the thing https://www.thingiverse.com/thing:4785679
It definitely works with Wrangler JK 2017 and definitely not with a 2008 JK. So better remove your vent ring and check the tabs with the model before printing." https://3dcarparts.org/library/2017/Jeep/Wrangler/vent-ring https://r2-upload.3dcarparts.workers.dev/file/parts/5062807d-e2fb-4db4-bc0f-ef13ed6418d6/images/vent-ring-1_1777442823089_z8j99y.jpg in_stock 8.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Jeep/Wrangler/vent-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8aa101a-4a28-4c59-973b-0c679303a754 2012 Jeep Wrangler Cup Holder Inserts "My wife's 2012 Jeep Wrangler did not have inserts in the front cup holders. These inserts have a small lip to them that will capture drips and crumbs. There is a small tab designed in to allow you to grab it with some needle nose. It is small tab that you will need to slow the print down if you want it to come out well. In the end it is probably not critical and if it does not print well you can just cut it off. Mine printed pretty good and seems secure.
Note there are 2 different sizes for the front cup holder. You will need to print one of each.
Printed with TPU, not sure what size adjustments may be needed if you print in a different or a rigid material.
Enjoy." https://3dcarparts.org/library/2012/Jeep/Wrangler/cup-holder-inserts https://r2-upload.3dcarparts.workers.dev/file/parts/c8aa101a-4a28-4c59-973b-0c679303a754/images/cup-holder-inserts-1_1777442823777_gxajgb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Jeep/Wrangler/cup-holder-inserts?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-75a3e09e-9788-47e1-98d9-14461e1efed4 2018 Jeep Wrangler Cowl Light Mount This is a simple single light mount for the cowl or close to the a-pillar for a Jeep Wrangler JL https://3dcarparts.org/library/2018/Jeep/Wrangler/cowl-light-mount https://r2-upload.3dcarparts.workers.dev/file/parts/75a3e09e-9788-47e1-98d9-14461e1efed4/images/cowl-light-mount-1_1777442823367_3cgtq9.jpg in_stock 21.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2018/Jeep/Wrangler/cowl-light-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5508f05a-bc21-4097-9006-6a5eba5219fe 1997 Jeep Wrangler Rear Camera Mount (Third Brake Light Replacement) "I designed this third brake light replacement specifically to fit the WOLFBOX G900 series rear cameras that come with their dash camera kits. From what I can tell based on Wolfbox's website, it looks like this style camera comes with the G900/G930 models. This piece will not work for their G800 series kits.
In order to stay legal, safe, and functional; I added provisions for two 3/4"" LED marker lights that can be spliced into the factory harness for your third brake light. (Pictures included to show how I did this.) I got the lights from a local auto parts store but they can easily be found online by searching (3/4"" red led marker light).
To keep the camera in place, I utilized the screws that were originally used for mounting the metal bracket that comes with the camera.
-Printed in ASA for best heat/UV resistance
-40% Gyroid Infill" https://3dcarparts.org/library/1997/Jeep/Wrangler/rear-camera-mount-third-brake-light-replacement https://r2-upload.3dcarparts.workers.dev/file/parts/5508f05a-bc21-4097-9006-6a5eba5219fe/images/rear-camera-mount-third-brake-light-replacement-1_1777442820884_2zyx8u.jpg in_stock 17.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/rear-camera-mount-third-brake-light-replacement?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-94b8ebfc-130e-4902-b58d-07f1e3002bc8 1987 Jeep Wrangler Hood Prop Rod Retaining Clip If the snap for your hood strut is long gone and you don't want to order another one for $5 or whatever they cost and wait a week to get it, print this one in PLA+ for $.05. I've had mine for about three years now and it's still holding up. https://3dcarparts.org/library/1987/Jeep/Wrangler/hood-prop-rod-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/94b8ebfc-130e-4902-b58d-07f1e3002bc8/images/hood-prop-rod-retaining-clip-1_1777442818692_aj02t9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1987/Jeep/Wrangler/hood-prop-rod-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9b92735f-698f-4f20-92c3-365d419ef642 1998 Jeep Wrangler Speaker Mounts "This part is a spacer/mount for a 4"" x 6"" spreaker that mounts in the left and right sides of a 1998 Jeep Wrangler TJ dash. My original speakers were poorly rigged with this pieces of metal and the factory screws, and even then, it did not allow the cover to be put on easily without bending the speaker mounts and pushing the cover out. The 3d printed pieces allow the covers to be put on flush as shown by the last picture and hold the speakers firmly in place (and consequently took out some of the rattle in the dash). The speaker mounting holes may be changeable, I have not tried to redownload it and to change them for other speakers. I am also not sure if it fits any other years or models because it was designed to fit my personal Jeep. This part is my first original design after searching all over for similar parts on Thingiverse, only to find that none matched what I needed." https://3dcarparts.org/library/1998/Jeep/Wrangler/speaker-mounts https://r2-upload.3dcarparts.workers.dev/file/parts/9b92735f-698f-4f20-92c3-365d419ef642/images/speaker-mounts-1_1777442824572_p6jjxn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1998/Jeep/Wrangler/speaker-mounts?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d7f8969a-850b-4f0f-b9ac-eae4ce3bd8d2 1997 Jeep Wrangler Windshield Frame Dash Cam Mount "The way the Jeep Wrangler TJ windshield is made, it was not easy for the type of dash cam that I had bought to properly fit and (a) look right, (b) work properly with a good viewing angle.
so I went to the ol tinkercad and designed this." https://3dcarparts.org/library/1997/Jeep/Wrangler/windshield-frame-dash-cam-mount https://r2-upload.3dcarparts.workers.dev/file/parts/d7f8969a-850b-4f0f-b9ac-eae4ce3bd8d2/images/windshield-frame-dash-cam-mount-1_1777442820505_o0e25q.jpg in_stock 9.72 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/Jeep/Wrangler/windshield-frame-dash-cam-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-47673d28-8e06-4788-8bef-c43bdaf5e9bc 2003 Jeep Wrangler Hood Prop Rod Clip Modeled this hood prop rod clip for my 2003 Jeep Wrangler. After removing the old clip, this one pops right into place and secures the prop rod. https://3dcarparts.org/library/2003/Jeep/Wrangler/hood-prop-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/47673d28-8e06-4788-8bef-c43bdaf5e9bc/images/hood-prop-rod-clip-1_1777442822279_8sxal6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Jeep/Wrangler/hood-prop-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cb472ab5-8e1f-43ba-9b09-46e56600249b 2014 Jeep Wrangler Cup Holder Adapter I created a simple adapter for my 2014 Jeep Wrangler to accommodate larger beverage containers. There is a solid version and a wire frame version. https://3dcarparts.org/library/2014/Jeep/Wrangler/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/cb472ab5-8e1f-43ba-9b09-46e56600249b/images/cup-holder-adapter-1_1777442806415_r7bpv0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Jeep/Wrangler/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0e059dc4-7dfa-4b0d-9670-8e741e4170e3 1997 Jeep Wrangler Interior Door Handle I made this door handle after the original one and the one I bought after broke. It is still in the car after ~9 months and holds up very well. I used it on the passenger door, but I think it will work on the driver door as well. https://3dcarparts.org/library/1997/Jeep/Wrangler/interior-door-handle https://r2-upload.3dcarparts.workers.dev/file/parts/0e059dc4-7dfa-4b0d-9670-8e741e4170e3/images/interior-door-handle-1_1777442805186_f4n5r1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/interior-door-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f278f7aa-925e-4300-99de-34edf6d99ab0 1997 Jeep Wrangler Center Console Tray Tray for the Upper portion of the center console on a TJ wrangler. I hated how small the original tray was, and I wanted to add a Ram mount for a wireless charger. It fits fairly well, just a bit tight, though still very usable. The hole in the tray is meant for a USB cable to go through (I have one running inside the center Console to minimize wires) https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-tray-2 https://r2-upload.3dcarparts.workers.dev/file/parts/f278f7aa-925e-4300-99de-34edf6d99ab0/images/center-console-tray-2-1_1777442802476_gfb0ib.jpg in_stock 35.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-tray-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf5850bd-42ea-410f-a6d2-c1dd10404ffa 2007 Jeep Wrangler A-Pillar RAM Mount "This is just a remodel of Jeep JK Wrangler A-Pillar RAM Mount.
https://www.thingiverse.com/thing:2349301
I just wanted mine to be round and not have the facets." https://3dcarparts.org/library/2007/Jeep/Wrangler/a-pillar-ram-mount https://r2-upload.3dcarparts.workers.dev/file/parts/cf5850bd-42ea-410f-a6d2-c1dd10404ffa/images/a-pillar-ram-mount-1_1777442802138_y8aqwe.jpg in_stock 13.20 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/a-pillar-ram-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8cc38c3f-a6e7-48f0-9e23-389aea691858 1997 Jeep Wrangler Gas Cap Tether This is a fuel cap tether replacement for a 1997-2006 Jeep Wrangler TJ. Print with flexible filament (Geetech TPU). https://3dcarparts.org/library/1997/Jeep/Wrangler/gas-cap-tether https://r2-upload.3dcarparts.workers.dev/file/parts/8cc38c3f-a6e7-48f0-9e23-389aea691858/images/gas-cap-tether-2_1777442799314_1gnbqo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/gas-cap-tether?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-81faee18-72ad-4d84-80d4-ce3dff0991ec 2008 Jeep Wrangler Switch Pod This is a switch pod I designed based on the common aftermarket switch pods for automatic transmission Jeep JKs. This was designed for my 2008 JKU, and can fit 5 switches. I cut holes for the particular switches I used, but included the part file if you want to cut others. https://3dcarparts.org/library/2008/Jeep/Wrangler/switch-pod https://r2-upload.3dcarparts.workers.dev/file/parts/81faee18-72ad-4d84-80d4-ce3dff0991ec/images/switch-pod-1_1777442797443_3xzgnj.jpg in_stock 26.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Jeep/Wrangler/switch-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5cd18860-3724-4d61-95d1-af64fb3e42eb 2023 Jeep Wrangler Doors Off Mirror Mount "DISCLAIMER: The mirror portion of this is a remixed piece that I found at this link on Printables. It won't let me give proper credit. https://www.printables.com/model/620766-jeep-doors-off-mirror-mount
However, I hate using hardware when I can really just design threaded 3D printed objects that will scratch up my paint a bit less, so I remixed the mirror portion to have threads and then created a threaded knob that I pass up through the bottom of the door hinges and thread into the mirror mounts. As shown at the Printables link, these guys were originally designed to accommodate these cheap blind spot mirrors from Walmart (https://www.walmart.com/ip/Auto-Drive-RV-and-Truck-Adjustable-Blind-Spot-Mirror-Universal-Fit-Black/659772450?fulfillmentIntent=Pickup&from=/search). Since I made these in a hurry, I mocked up the driver's side mirror and then just flipped it, so you'll notice the driver's mirror bolt threads in the normal way but the passenger's threads in the opposite direction. You want to use a very sturdy infill on the knobs, I used 90% and they're holding well. I have tested these on my 2023 Jeep Wrangler Rubicon JL two door and they work for me, but I only have the one Jeep so I cannot say these will work for the JK or the TJ or the YJ or any other generation, but they very well could. If anyone wants to test out other generations of Jeep, post your findings in the comments." https://3dcarparts.org/library/2023/Jeep/Wrangler/doors-off-mirror-mount https://r2-upload.3dcarparts.workers.dev/file/parts/5cd18860-3724-4d61-95d1-af64fb3e42eb/images/doors-off-mirror-mount-1_1777442799957_5x61en.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2023/Jeep/Wrangler/doors-off-mirror-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-838543d6-1dc3-4147-a40a-0a9ecfe9f710 1987 Jeep Wrangler Soft Top Door Seal Clip this is the clip that locks the soft top window frame to the windshield channel. Officially called a soft top door seal clip. https://3dcarparts.org/library/1987/Jeep/Wrangler/soft-top-door-seal-clip https://r2-upload.3dcarparts.workers.dev/file/parts/838543d6-1dc3-4147-a40a-0a9ecfe9f710/images/soft-top-door-seal-clip-1_1777442792546_t5guao.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1987/Jeep/Wrangler/soft-top-door-seal-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-56ef8ea9-189f-4e30-a33d-fd7ec74acfc1 2018 Jeep Wrangler Fender Clip "This is a close approximation to the Jeep JL Fender clips
Mopar 68526185AA
I printed it successfully bu turning in 90deg on it s side and use Tree Supports
NOTE: I have not actually used this on a Jeep.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/27DktGMzbO3" https://3dcarparts.org/library/2018/Jeep/Wrangler/fender-clip https://r2-upload.3dcarparts.workers.dev/file/parts/56ef8ea9-189f-4e30-a33d-fd7ec74acfc1/images/fender-clip-1_1777442794472_ip0kev.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2018/Jeep/Wrangler/fender-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9dbbc300-e1fd-4270-b3c6-7f15cff5154b 2018 Jeep Wrangler Rocklight Courtesy Light Mount "Designed a Rocklight Mount that utilizes the existing/unused threaded hole just under the driver side & passenger doors. I wanted a courtesy light to assist stepping into the jeep on dark nights when on uneven ground/rocks. For the 12v source I tapped into the driver's side footwell lighting. It has a ""soft"" ON/OFF and comes on when remote unlocking or manual opening of the doors." https://3dcarparts.org/library/2018/Jeep/Wrangler/rocklight-courtesy-light-mount https://r2-upload.3dcarparts.workers.dev/file/parts/9dbbc300-e1fd-4270-b3c6-7f15cff5154b/images/rocklight-courtesy-light-mount-1_1777442789923_wp03af.jpg in_stock 18.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2018/Jeep/Wrangler/rocklight-courtesy-light-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c7e73175-1f7b-48b3-bd3d-2097dd238b74 2018 Jeep Wrangler Wiper Puller "Ever tried to drop the windshield on your JL but couldn't get the wiper off? This uses a standard 1/4"" bolt and nut and got the job done without any fuss. I used a Creality Ender 3D pro and used 5 layers of outside shell and laid the part down horizontally so the pull force was aligned with the print strings.
Do yourself a favor: DO NOT drive the vehicle without securing the windshield to the hood. One wrong gust of wind and it'll blast upwards into your face." https://3dcarparts.org/library/2018/Jeep/Wrangler/wiper-puller https://r2-upload.3dcarparts.workers.dev/file/parts/c7e73175-1f7b-48b3-bd3d-2097dd238b74/images/wiper-puller-1_1777442791221_39ci6v.jpg in_stock 15.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2018/Jeep/Wrangler/wiper-puller?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-939a40b0-47f6-4f24-b5c1-ae5871e2e0c3 2007 Jeep Wrangler Reversing Camera Housing "I have the ARB license plate relocation bracket and wanted to add an Alpine reversing camera to the bracket. This works perfectly.
I actually mounted the bottom half of the bracket to the number plate using double sided mounting tape.
Zip ties through the holes up the centre hold the camera in place without any further fixing.
The camera is angled at 30 degrees and this gives a good view. (35 degrees may have been a little better with hindsight.)" https://3dcarparts.org/library/2007/Jeep/Wrangler/reversing-camera-housing https://r2-upload.3dcarparts.workers.dev/file/parts/939a40b0-47f6-4f24-b5c1-ae5871e2e0c3/images/reversing-camera-housing-1_1777442781101_4xwlfa.jpg in_stock 16.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/reversing-camera-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ec653e17-9f48-40ff-b73b-2ae129943d44 2007 Jeep Wrangler Hardtop Retaining Clip Jeep Wrangler JK replacement retaining clip for aftermarket nut and bolt set. The original clip has tabs that attach the retaining clip to the frame but for my purposes, the tabs were not needed. No supports were used and the infill was 75%. https://3dcarparts.org/library/2007/Jeep/Wrangler/hardtop-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ec653e17-9f48-40ff-b73b-2ae129943d44/images/hardtop-retaining-clip-1_1777442788005_0jskgz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/hardtop-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c234cf28-ea98-41eb-aac7-2119776ce773 1997 Jeep Wrangler In-Dash Speaker Pods "This is a set of 5.25"" speaker pods that I designed for my TJ to give my mids a little more oomph. The pods made a huge difference in my sound system. If you try them out, please leave a little feedback and let me know your thoughts so I might improve future versions of the pods!
It is recommended to add sound dampening material to the inside of the shell plastic, as well as a little polyfill. I used 80mil from Siless, as it was pretty cheap from Amazon.
They are easy enough to print without supports, but come out nicer with supports. These were designed to work with [Memphis PRX50C](https://www.memphiscaraudio.com/product-page/prx50c-5-25-component-set) 5.25"" components. If you would like a link to my tweeter solution, [Click me!](https://www.thingiverse.com/thing:2894802)
There also isn't a hole in the shell for wiring, so you will need to drill that yourself. This is planned to be addressed with future iterations." https://3dcarparts.org/library/1997/Jeep/Wrangler/in-dash-speaker-pods https://r2-upload.3dcarparts.workers.dev/file/parts/c234cf28-ea98-41eb-aac7-2119776ce773/images/in-dash-speaker-pods-1_1777442780550_9z9r5i.jpg in_stock 20.50 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/in-dash-speaker-pods?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d8a18ab-3f29-4dcc-b202-f02faa091bce 1997 Jeep Wrangler Front 5.25 Inch Speaker Adapter "I eliminated the lettering to save filament and print time and added some fillets to smooth it out and add strength. Printed with 3 top and 3 bottom layers 0.4 nozzle, 3 outer walls, 40% infill, in MG Chemical (my favorite) PETG at 244 0-40% fan since there is no bridging, the lack of cooling should make it stronger (and 70 bed on my Ender 3 Pro) YMMV
With PETG heat should NOT be an issue" https://3dcarparts.org/library/1997/Jeep/Wrangler/front-525-inch-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/4d8a18ab-3f29-4dcc-b202-f02faa091bce/images/front-525-inch-speaker-adapter-1_1777442777923_4hr2xo.jpg in_stock 16.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/front-525-inch-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7556b74e-434c-4616-9171-e9a916b4deed 2003 Jeep Wrangler TJ Shift Knob "Shift knob for my 2003 Jeep TJ Rubicon. This is for the 5 speed NV3550 but may also fit other models with the Metric M10x1.5 thread. Print with the threaded hole facing down, will leave the top of the knob nicely finished. Once done, just clean up the threads with a tap.
I printed with 50% infill, but you can go lighter if you wish or heavier, depending on your personal preference. I used PLA but you can also use other materials......hmmm maybe I should print one with PLA/Carbon ;)" https://3dcarparts.org/library/2003/Jeep/Wrangler%20TJ/shift-knob https://r2-upload.3dcarparts.workers.dev/file/parts/7556b74e-434c-4616-9171-e9a916b4deed/images/shift-knob-1_1777442776847_ut730t.jpg in_stock 21.61 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Jeep/Wrangler%20TJ/shift-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b43f844b-f36f-4bf6-99a7-4fa16ead47fb 1997 Jeep Wrangler Soft-top Tailgate Bar Sleeve "This is a model of the rubber and plastic sleeve that slips into channels on each end of the soft-top tailgate bar for the Jeep Wrangler TJ.
For the actual OEM sleeve, part of it is hard plastic and part is rubber. I don't have a multi-material extruder, so I printed the entire sleeve in TPU (flexible polyurethane), and that seems to work well in this application.
The sleeve model is exported as two bodies in the STL file, so you can split it into the plastic part and the rubber part. (In the orientation picture, the rubber part is green and the plastic part is yellow.) Then, if you have a multi-material setup, you can print the plastic part in PETG or ABS and print the rubber part with TPU.
I printed the sleeve with black YOYI brand TPU (flexible) with 100% infill. The picture of the blue test print is also TPU. The TPU prints are stringy and shiny, so it's hard to get a good picture. The white print is PETG and I only printed 5mm of the sleeve to show a clear picture of the cross-section.
I printed the sleeve vertically first, and that created a very stringy print. (I haven't really figured out how to get a clean TPU print. If anyone has good TPU settings for the Prusa MK2S, please feel free to share.)
My second attempt was better because I rotated the model to print lengthwise with the long cross-section side down on the print bed. See the picture showing the orientation on the bed in the slicer tool. If you print this way (and I recommend that you do for TPU), then enable support material.
The part, as modeled and printed, fits well into the channels in the tailgate bar and into the holding brackets on the back of the Wrangler TJ.
_Edit 07/14/18:_ I uploaded a new version that is 1mm narrower and has rounder corners to fit better in the back of the metal bar holder bracket on the Jeep.
_Edit 01/18/21:_ I uploaded a new version (v12) that has the correct model orientation within the STL for printing and has 45° sloped interiors to prevent the generation of support material on the inside of the two outer channels. The center channel still requires support material." https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-top-tailgate-bar-sleeve https://r2-upload.3dcarparts.workers.dev/file/parts/b43f844b-f36f-4bf6-99a7-4fa16ead47fb/images/soft-top-tailgate-bar-sleeve-1_1777442775989_jxz969.jpg in_stock 16.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-top-tailgate-bar-sleeve?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-067e1800-0f5b-4e4a-84cd-b69cee4e773e 1997 Jeep Wrangler Speaker Box Mounting Plate This is a very simple and basic 4x6 inch speaker box / mount. I drew this for my '97 Jeep Wrangler TJ. I didn't draw additional holes to mount it to the jeep but the box fits just inside the mounting holes so screws hold it in place anyway. I also didn't draw a hole for the speaker wire, I just melted one with a hot bolt. This way you can make the hole whatever size you need and put it in the best place possible. Speaker mounting holes are 111 mm x 80 mm, I drew it forthe Rockford Fosgate Punch P1462. https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-box-mounting-plate https://r2-upload.3dcarparts.workers.dev/file/parts/067e1800-0f5b-4e4a-84cd-b69cee4e773e/images/speaker-box-mounting-plate-1_1777442771146_c4mfge.jpg in_stock 21.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/speaker-box-mounting-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f4d617ad-1b18-4bf2-901a-4eff5d815930 2004 Jeep Wrangler License Plate Light LED Housing "A few years ago, my license plate light melted on my Jeep Wrangler TJ 2004. Replacement parts would cost several hundred, so this design was created to replace the original mounting and the bulbs with LED.
In my project, the covers from the car were reused, but new ones were also designed during the process for future replacement. The idea was to fill the hole with plastic to provide a transparent surface." https://3dcarparts.org/library/2004/Jeep/Wrangler/license-plate-light-led-housing https://r2-upload.3dcarparts.workers.dev/file/parts/f4d617ad-1b18-4bf2-901a-4eff5d815930/images/license-plate-light-led-housing-1_1777442769070_1nu0at.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2004/Jeep/Wrangler/license-plate-light-led-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-315a7909-48de-41af-8a9e-e55554c4cb31 1997 Jeep Cherokee / Wrangler Air Vent Gauge Mount "Should fit dashboard side vents for '97-'01 XJ Cherokee and '97-'06 TJ Wrangler. Inspired by an existing design that was floating around (which I can't find now), but re-modeled from scratch with more robust attachment clips. FreeCAD project file included.
Print face-down without support. Should probably be printed in ABS to cope with summer heat (and winter use of the heater), but I'm YOLO-ing it with PLA for now.
Remove the original vent by gently prying out at the top and bottom. Install this one by bending the top and bottom walls over the mounting posts. Note that the top and bottom mounting posts are different sizes - the vent can only go in one way up!" https://3dcarparts.org/library/1997/Jeep/Cherokee%20%2F%20Wrangler/air-vent-gauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/315a7909-48de-41af-8a9e-e55554c4cb31/images/air-vent-gauge-mount-1_1777442763698_x0fte1.jpg in_stock 10.54 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Cherokee%20%2F%20Wrangler/air-vent-gauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-473f9766-953d-4aa9-8764-b1aead3dfe70 1997 Jeep Wrangler HVAC control knob "I own a 1997, 1999, & 2001 Jeep Wranglers. Every couple years I'll have a knob break during a really cold winter day when I try to use them, so I decided to make my own!
Dimensions taken directly from OEM Jeep Wrangler knobs, using a set of vernier calipers and some good old fashion best guesses.
Each jeep has at least 1 knob at this point, put spares in each in case they ever give out!" https://3dcarparts.org/library/1997/Jeep/Wrangler/hvac-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/473f9766-953d-4aa9-8764-b1aead3dfe70/images/hvac-control-knob-1_1777442760627_ys6yz5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/hvac-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-510ccf2e-8d4f-47cf-afe5-3bf0b03cbc0c 2002 Jeep Wrangler Dashboard USB port insert "this is a printable 3d dash replcament hole for the jeep wrangler 2002 dash to add a usb plug in the dash
https://www.amazon.com/gp/product/B07J4ST13K/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1
i use this usb plug and merge with it
to make it fit perfet put boiling water and them let the 3d model for 30s and it will be easily fittable on the jeep dash" https://3dcarparts.org/library/2002/Jeep/Wrangler/dashboard-usb-port-insert https://r2-upload.3dcarparts.workers.dev/file/parts/510ccf2e-8d4f-47cf-afe5-3bf0b03cbc0c/images/dashboard-usb-port-insert-1_1777442759240_tqri8q.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Jeep/Wrangler/dashboard-usb-port-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-65adc889-c892-477a-8f4b-f92174231b89 1998 Jeep Wrangler Fog Light Guard I designed, printed, and installed these onto my 2004 Jeep wrangler Rubicon fog lights. https://3dcarparts.org/library/1998/Jeep/Wrangler/fog-light-guard https://r2-upload.3dcarparts.workers.dev/file/parts/65adc889-c892-477a-8f4b-f92174231b89/images/fog-light-guard-2_1777442754212_9lgbfa.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Jeep/Wrangler/fog-light-guard?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2fe7573f-aff3-44b6-a418-4e7d2d0c5e1d 1997 Jeep Wrangler Antenna Mount Cover "This is a cover for the Jeep Wrangler TJ antenna mount. its based after an aftermarket part that I thought would be more durable then the original.
If you decide to make it, post an image of your completed product. If you like don't forget to leave me a tip. Its greatly appreciated!" https://3dcarparts.org/library/1997/Jeep/Wrangler/antenna-mount-cover https://r2-upload.3dcarparts.workers.dev/file/parts/2fe7573f-aff3-44b6-a418-4e7d2d0c5e1d/images/antenna-mount-cover-1_1777442753551_8g0nif.jpg in_stock 9.18 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/antenna-mount-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ecc12d5c-c3b5-46f2-9bb9-435bb381892f 1997 Jeep Wrangler Air Vent Can/Bottle Cooler Holder "[Updated Sep 14, 2015, see below]
There are two versions of this cooler, both works very well on my 2001 Wrangler:
RED - A bit larger on the outside as it holds the bottle in an angle to keep it away from the dashboard and the audio / navigation screen.
PURPLE - looks slimmer but has the same capacity, hold the bottle as close as possible to the dashboard and therefore may interfere when in front of a touch screen.
Personally I prefer the red version as it is not interfering with my touch screen.
The third part of the Red version is an optional bridge you need to glue in place in order to control the airflow and keep the bottle in the middle of the holder.
Apart from the four holes (for screws holding the container part) which only exists on the PURPLE version, the two Vent parts are identical.
Both versions can be used on center or side (window) vents. On center vents the holders are held with a latch preventing them from accidentally turning with vent’s bearing.
----
Sep 14, 2015 - Added a vent part that has a small bump to help ""click"" the part in the vent nozzle and prevent it from sliding out when driving off-road.
RED Bottle Cooler Part B - Vent with bump.stl" https://3dcarparts.org/library/1997/Jeep/Wrangler/air-vent-canbottle-cooler-holder https://r2-upload.3dcarparts.workers.dev/file/parts/ecc12d5c-c3b5-46f2-9bb9-435bb381892f/images/air-vent-canbottle-cooler-holder-1_1777442760952_oqlvdp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/air-vent-canbottle-cooler-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-192f29ce-be96-4a5a-9910-cb4bee38071f 2007 Jeep Wrangler Door Hinge Protector "Hinge guards to protect the paint on your door hinges from gravel road rocks.
Upper is slightly larger and will fit hinges with more rust/oxidation.
Lower is a tighter fit and will fit most hinges.
Updated tighter is more snug and slightly thicker. I had two of the lower ones fall off after 500 or so miles.
Latest version is the bulge. I checked this one against another JK and it fit well in winter. This is the one I now recommend using, do to the thermal expansion affecting the lower fitment.
They are designed thin to be cheap and fast to print, while still offering protection from rocks.
If requested I could make a thicker version." https://3dcarparts.org/library/2007/Jeep/Wrangler/door-hinge-protector https://r2-upload.3dcarparts.workers.dev/file/parts/192f29ce-be96-4a5a-9910-cb4bee38071f/images/door-hinge-protector-1_1777442749156_abq9gm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/door-hinge-protector?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1532d75c-baa0-41e6-a5bf-30ff8851f01a 1997 Jeep Wrangler PTT Microphone Mount "A mount for a CB or ham radio microphone that mounts using the existing dash screw next to the driver's right knee.
I am currently using this design as-is, but there are a few changes that I would make for the next iteration:
1 - Correct the screw hole diameter - The screw is not flush with the current hole size.
2 - Match the mount to the curvature of the dash.
3 - Add a fillet to the part that goes between dash pieces." https://3dcarparts.org/library/1997/Jeep/Wrangler/ptt-microphone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/1532d75c-baa0-41e6-a5bf-30ff8851f01a/images/ptt-microphone-mount-1_1777442745690_4h7um9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/ptt-microphone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3883ccd1-dec0-45bd-b879-ba96a0a3d312 1997 Jeep Wrangler Soft Door Window Latch "I own a 1997, 1999, & 2001 Jeep Wranglers, so I have a lot of opportunities to replace broken parts. The OEM window latches have a spring built into them which broke over time, so rather than buying a whole new set of windows I decided to make my own latch!
Dimensions taken directly from OEM Jeep Wrangler window latches, using a set of vernier calipers and some good old fashion best guesses.
I've replaced all 4 in my Jeep and they work SOOO much better now, I no longer have to keep closing my windows as they slide open whenever I drive over bumps." https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-door-window-latch https://r2-upload.3dcarparts.workers.dev/file/parts/3883ccd1-dec0-45bd-b879-ba96a0a3d312/images/soft-door-window-latch-1_1777442747269_opid07.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/soft-door-window-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0880ebe5-374a-4f8a-abed-229ecd9dfe9b 2007 Jeep Wrangler GPS Mount I looked for a GPS mount to buy or print and ended up making my own. It's 2 parts for easy printing that I epoxied together to form a clip into place mount that keeps the GPS out of sight and still easy to see. A nice snap into place indicates a good snug fit. I lightly sanded the ball to knock off any rough edges and it fits the Garmin mount socket nicely. https://3dcarparts.org/library/2007/Jeep/Wrangler/gps-mount https://r2-upload.3dcarparts.workers.dev/file/parts/0880ebe5-374a-4f8a-abed-229ecd9dfe9b/images/gps-mount-1_1777442746226_j2l36u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/gps-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0068790b-a972-4ac2-900a-afc152f883f5 2007 Jeep Wrangler Fender Clip "I made this to attach my rear fender back onto my JK after a collision with a kangaroo tore off the left hand side fender. I ordered the replacement clips but I need to drive the car before they will arrive.
Most of the dimensions are pretty close to the real deal but I did make a few dimensions a little thicker to increase the strength of the part as I wasn't sure if it would be strong enough otherwise.
Print with 100% infill, supports, horizontal for better strength at the collar between the two flanges and in ABS or similar strength material that does also bend, so Nylon and PETG will likely work nicely." https://3dcarparts.org/library/2007/Jeep/Wrangler/fender-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0068790b-a972-4ac2-900a-afc152f883f5/images/fender-clip-1_1777442739577_veipog.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/fender-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8029742-8407-4770-9dc3-6c348b54765a 1997 Jeep Wrangler Mirror Extension Arm "There are several aftermarket brackets that move the door mounted mirrors onto the body. This is great for driving without doors, but the passenger mirror is pretty much useless with the doors on. My solution is this arm extension which bolts in place of the mirror and extends the mirror out an additional 3"". The V1 is a 2"" extension, but the 3"" works better for my height." https://3dcarparts.org/library/1997/Jeep/Wrangler/mirror-extension-arm https://r2-upload.3dcarparts.workers.dev/file/parts/c8029742-8407-4770-9dc3-6c348b54765a/images/mirror-extension-arm-1_1777442739276_tnfl8w.jpg in_stock 19.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/mirror-extension-arm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5267b8bd-d80d-447d-805f-7f969bbcd9a1 2007 Jeep Wrangler Turn Signal Bracket "Created using Tinkercad.
I created these to hold a 3/4"" marker light from Amazon.
""Partsam Pair 3/4"" Mini Marker Clearance Light Turn Signal Light 1 Diode Amber Light,3 Wires""
The slit allows for easy install/take off without having to struggle with a plug or unwire the light." https://3dcarparts.org/library/2007/Jeep/Wrangler/turn-signal-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/5267b8bd-d80d-447d-805f-7f969bbcd9a1/images/turn-signal-bracket-1_1777442742695_5g6jn3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/turn-signal-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-41276592-df3b-48b6-b339-e0e754fb3a3b 2024 Jeep Wrangler Dashboard Duck Table Jeep Duck Table for Jeep Wrangler JL MY24 https://3dcarparts.org/library/2024/Jeep/Wrangler/dashboard-duck-table https://r2-upload.3dcarparts.workers.dev/file/parts/41276592-df3b-48b6-b339-e0e754fb3a3b/images/dashboard-duck-table-2_1777442733267_ltxnkz.jpg in_stock 22.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2024/Jeep/Wrangler/dashboard-duck-table?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-681db1e5-bc76-4917-8292-7c00cbe72a62 2007 Jeep Wrangler Vent Ring Phone Holder "A replacement vent ring for Wrangler JK redesigned as phone holder for OnePlus8. I designed it to fit with the silicon case that came with the phone.
Two M5 nuts and bolts are needed to fasten the spacer as well as three screws for the phone holder.
I ended up printing the vent ring upside down to get the best surface finish.
All .3fd files are included if you want to improve on the design or make it fit another phone." https://3dcarparts.org/library/2007/Jeep/Wrangler/vent-ring-phone-holder https://r2-upload.3dcarparts.workers.dev/file/parts/681db1e5-bc76-4917-8292-7c00cbe72a62/images/vent-ring-phone-holder-1_1777442735089_7vhk9n.jpg in_stock 11.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/vent-ring-phone-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cfc6e7d7-d417-4e0b-90a6-42b1d3921aba 2007 Jeep Chrysler Dodge Multiple Double DIN Dash Kit "Double Din Dash Kit for Jeep Chrysler Dodge VW... See below for vehicle fitment. As always, I never put the radio mounting holes due to the many different brands available, so you will have to drill your own holes depending on radio fitment.
Chrysler
200 2011-2014
300/300C 2008-2010
Aspen 2008-2009
Sebring 2007-2010
Town and Country 2008-2017
Dodge
Avenger 2008-2014
Caliber 2009-2012
Challenger 2008-2014
Charger 2008-2010
Dakota 2008-2011
Durango 2008-2009
Grand Caravan 2008-up
Journey 2009-2010* (Modifications to radio cavity required)
Magnum 2008-2009
Nitro 2007-2011
Ram 1500 2009-2011
Ram 2500/3500 2010-2011
Ram Chassis Cab 2011
Jeep
Compass 2009-2017.5
Commander 2008-2010
Grand Cherokee 2008-2010
Patriot 2009-2017
Liberty 2008-2012
Wrangler 2007-up* (Modifications to radio cavity required)
Wrangler Unlimited 2007-up* (Modifications to radio cavity required)
Mitsubishi
Raider 2008-2009
Ram
1500/2500/3500 2012
Chassis Cab 3500/4500/5500 2012
C/V Tradesman 2012-2015
VW
Routan 2009-2013" https://3dcarparts.org/library/2007/Jeep%20Chrysler%20Dodge/Multiple/double-din-dash-kit https://r2-upload.3dcarparts.workers.dev/file/parts/cfc6e7d7-d417-4e0b-90a6-42b1d3921aba/images/double-din-dash-kit-1_1777442727029_www7u2.jpg in_stock 19.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep%20Chrysler%20Dodge/Multiple/double-din-dash-kit?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-93def2cb-7514-40fd-9e90-2b32ecc2a010 2018 Jeep Wrangler Magnetic Phone Mount "I have designed this Phone mount holder. It is held in place by a small piece of double sided Tape on the rear of the mount inside the little storage container on the dash.
You will need to buy the Magnetic mount, with the ball insert as you will be printing this Ball mount that is 17mm big. You can resize it in your slicer to your specific mount ball size.
This is my Video on this thing.
https://youtu.be/hLMeHr5ex2Q" https://3dcarparts.org/library/2018/Jeep/Wrangler/magnetic-phone-mount https://r2-upload.3dcarparts.workers.dev/file/parts/93def2cb-7514-40fd-9e90-2b32ecc2a010/images/magnetic-phone-mount-1_1777442726858_d7qtni.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler/magnetic-phone-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4ee23a72-66c8-4f24-a3a4-f4dfb01f778a 2014 Jeep Wrangler Console Lever Clip "Clip for the Driver's side console lever from a 2014 Jeep Wrangler. Model slides on exactly the same as OEM and is generally a bit easier to remove with the proper leverage. Some mild sanding is recommended for a more pleasing tactile texture but will not hinder the function.
I would model the smaller passenger side clip if the opportunity arises, but currently no plans to.
Recommend to print the closed tip downwards with normal supports (on build plate only!!!!!!!)." https://3dcarparts.org/library/2014/Jeep/Wrangler/console-lever-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4ee23a72-66c8-4f24-a3a4-f4dfb01f778a/images/console-lever-clip-1_1777442718951_0qd9p2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Jeep/Wrangler/console-lever-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2bb0876e-9cfc-4c7e-9906-5b2d47086331 2007 Jeep Wrangler Mud Flap "New design using 2 bolts and nuts to hold it. Use M5 stainless.
Simple Mud flaps to fit to front fenders. Designed to keep spray off the door handles. Push them in towards the body as far as possible, or some spray may sneak by as in the picture.
Probably works best on an unmodified car." https://3dcarparts.org/library/2007/Jeep/Wrangler/mud-flap https://r2-upload.3dcarparts.workers.dev/file/parts/2bb0876e-9cfc-4c7e-9906-5b2d47086331/images/mud-flap-1_1777442722956_e5fz18.jpg in_stock 22.25 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/mud-flap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3901d8d7-5faa-4daf-abc7-f27ea19a5fb1 1997 Jeep Wrangler Ashtray Cover "Lost the ashtray years ago on my wife's Wrangler. Was doing a refresh of the interior parts (yay heat gun and Vinylex) and decided to put my printer to a ""productive"" use.
Update 06.20.16: I adjusted the hinge pieces to fit. I used a wad of tack-it to keep the top closed. So far it's holding up to the 100+ temps here. Didn't realize the previous .stl file was v2f, but v2a is the current iteration, with the hinge pieces in the correct place.
A couple of caveats...
1) My first design with 123Design, so it was a learning project for sure.
2) The extrusions designed to fit over the hinges actually miss the mark, but they're close enough to the hinge that it actually holds it in place. The top of the extrusion ends up right below the hinge.
3) Originally I was going to add an extrusion that would latch to the metal piece in the cavity that the ashtray usually snaps into, but opted it was unnecessary (see caveat #2)." https://3dcarparts.org/library/1997/Jeep/Wrangler/ashtray-cover https://r2-upload.3dcarparts.workers.dev/file/parts/3901d8d7-5faa-4daf-abc7-f27ea19a5fb1/images/ashtray-cover-1_1777442720478_p6d7xm.jpg in_stock 19.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/ashtray-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-674a985e-e06f-4329-bc52-61c3e92fe79d 2007 Jeep Wrangler Defrost Diverter "This is a simple defrost diverter to help clear the windshield of your 2007 to 2010 Jeep JK Wrangler. The 20"" defrost grille is simply too short. This will send warm defroster air to the edges of the windshield and look pretty cool doing it.
I added the .stl file for download.
Have fun!" https://3dcarparts.org/library/2007/Jeep/Wrangler/defrost-diverter https://r2-upload.3dcarparts.workers.dev/file/parts/674a985e-e06f-4329-bc52-61c3e92fe79d/images/defrost-diverter-1_1777442718562_pbxofg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/defrost-diverter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-289af026-111e-49ce-9c7a-62f4f0103b12 2007 Jeep Wrangler Visor Sunglasses Storage Case "with limit jeep storage decided to sacrifice the mirror on the visor for sunglass storage
case simple slides on and off so you can remove if need be
the handle just gets drilled to a preferred location on the case lid
material: PLA
Supports : on the main frame yes, the other parts no.
Bed adhesion: placed a brim on the case lid." https://3dcarparts.org/library/2007/Jeep/Wrangler/visor-sunglasses-storage-case https://r2-upload.3dcarparts.workers.dev/file/parts/289af026-111e-49ce-9c7a-62f4f0103b12/images/visor-sunglasses-storage-case-1_1777442717389_tt776h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/visor-sunglasses-storage-case?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-671e6389-7d5e-4ad2-b36b-4d1caf0c436f 2007 Jeep Wrangler Fog Light Grille "JEEP Wrangler JK
This will not protect a lot but will look good." https://3dcarparts.org/library/2007/Jeep/Wrangler/fog-light-grille https://r2-upload.3dcarparts.workers.dev/file/parts/671e6389-7d5e-4ad2-b36b-4d1caf0c436f/images/fog-light-grille-1_1777442708272_6wob1c.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/fog-light-grille?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-76f2883a-2cb5-4604-8c56-dc77b835d3b4 2007 Jeep Wrangler Flasher Grille / Turn Signal Protector "Jeep Wrangler JK
This will not protect a lot but will look good." https://3dcarparts.org/library/2007/Jeep/Wrangler/flasher-grille-turn-signal-protector https://r2-upload.3dcarparts.workers.dev/file/parts/76f2883a-2cb5-4604-8c56-dc77b835d3b4/images/flasher-grille-turn-signal-protector-1_1777442705783_ddg9zn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/flasher-grille-turn-signal-protector?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9f873682-cf11-48df-b715-9535f570e3c5 1997 Jeep Wrangler Hard Top Quick-Release Knob "I wanted to install quick-release knobs on my Jeep TJ to simplify taking the hardtop off. There's lots of cheap bolt kits on eBay and Amazon, but I didn't care for the fact that the heads are all small. I wanted nice large knob heads to make it easy, and kits with large knobs were too expensive.
So I whipped these up in an afternoon. The design receives an M8x35 bolt. I purchased them from Lowe's in packs of two for $1.30 (see pic). After printing, just press a bolt into the hole. The head fit is tight, so you may have to use some tools (i.e. tap lightly with a hammer)." https://3dcarparts.org/library/1997/Jeep/Wrangler/hard-top-quick-release-knob https://r2-upload.3dcarparts.workers.dev/file/parts/9f873682-cf11-48df-b715-9535f570e3c5/images/hard-top-quick-release-knob-1_1777442700816_b9suem.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/hard-top-quick-release-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7416532c-d5d1-4be5-8500-3709e158a9e0 1997 Jeep Wrangler Dash Insert "Might have to rotate to make it fit. Will need supports if you want the overhang around the edge.
STL file in IMPERIAL units!!!
I have included a basic ""footprint"" of the opening so you can add whatever you would want.
I am also including the custom one I am making for myself. It is for holding a Spotify car thing and a radio shack HTX-202 ham radio. I'm assuming I may be the only one in the world needing both of these, but if you can make use of both, then here you go!
I would be happy to help you modify this to what you may need. If you have dimensions, comment and let me know." https://3dcarparts.org/library/1997/Jeep/Wrangler/dash-insert https://r2-upload.3dcarparts.workers.dev/file/parts/7416532c-d5d1-4be5-8500-3709e158a9e0/images/dash-insert-1_1777442698172_wlrade.jpg in_stock 22.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/dash-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-373ec81a-8390-4d5e-aaaa-6fe8d5c39447 2007 Jeep Wrangler Door Latch Cable Clip "Replacement cable clip for the door handle release of a Jeep Wrangler JK.
Recommend using PETG or other semi flexible, high temp plastic. I originally printed this in ABS, but it is a very tight fit and the plastic will flex a good bit when inserting into the handle.." https://3dcarparts.org/library/2007/Jeep/Wrangler/door-latch-cable-clip https://r2-upload.3dcarparts.workers.dev/file/parts/373ec81a-8390-4d5e-aaaa-6fe8d5c39447/images/door-latch-cable-clip-2_1777442696666_50h5le.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2007/Jeep/Wrangler/door-latch-cable-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-14b7314c-afba-463e-9c55-151974d47b25 1997 Jeep Wrangler Door Panel Window Crank Hole Plug "door plug for TJ Jeep Wrangler. I made this wonderful part for your unique Jeep Wrangler. It is installed if you already have power windows.
_VladislaV_" https://3dcarparts.org/library/1997/Jeep/Wrangler/door-panel-window-crank-hole-plug https://r2-upload.3dcarparts.workers.dev/file/parts/14b7314c-afba-463e-9c55-151974d47b25/images/door-panel-window-crank-hole-plug-1_1777442697690_sh9iza.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/door-panel-window-crank-hole-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fb2b805d-7ad1-4888-8171-dde358efeaa1 2015 Jeep Wrangler Faceplate Dash Bracket "I created this bracket to mount the detachable front panel of my Icom IC-706MkIIG Transceiver to the Dash of my 2015 Jeep Wrangler. It ""clips"" in to the gap above the radio and then into the pocket on the top of the dash. I decided to prime and paint smooth to match my dash.
It creates a flat front (vertical) surface, so presumably, you could mount whatever you would like. If you use the design, send a pick of what you mounted." https://3dcarparts.org/library/2015/Jeep/Wrangler/faceplate-dash-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/fb2b805d-7ad1-4888-8171-dde358efeaa1/images/faceplate-dash-bracket-1_1777442695017_490cdp.jpg in_stock 28.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2015/Jeep/Wrangler/faceplate-dash-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c7a57101-e42f-429d-8e78-11abf8985b81 2018 Jeep Wrangler HVAC Vent Support Insert "This is an insert to go into a Jeep Wrangler HVAC vent to prevent it from falling down when using a vent clip phone holder.
I'm using a Kenu Airframe Pro to hold my iPhone 12 Pro Max and the weight of the mount + phone doesn't allow the phone to stay upright. Enter the vent support.
Slide it in at the bottom and you're good to go. I included a little pull handle in the event you want to remove it.
Print with supports for the pull handle." https://3dcarparts.org/library/2018/Jeep/Wrangler/hvac-vent-support-insert https://r2-upload.3dcarparts.workers.dev/file/parts/c7a57101-e42f-429d-8e78-11abf8985b81/images/hvac-vent-support-insert-1_1777442689040_vxqtu4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Jeep/Wrangler/hvac-vent-support-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ff7bae70-7ce2-4a3b-a171-1d5b1b2f2058 2007 Jeep Wrangler Tailgate Vent Interior Light Mount "Tailgate mount for Harbor Freight rock lights that replaces the interior vent of Jeep Wrangler JKs.
https://youtu.be/3wczd86ocO8" https://3dcarparts.org/library/2007/Jeep/Wrangler/tailgate-vent-interior-light-mount https://r2-upload.3dcarparts.workers.dev/file/parts/ff7bae70-7ce2-4a3b-a171-1d5b1b2f2058/images/tailgate-vent-interior-light-mount-2_1777442688731_nakw08.jpg in_stock 19.61 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2007/Jeep/Wrangler/tailgate-vent-interior-light-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9f42b7f5-a81f-4830-aa9f-4818405f8a0a 1997 Jeep Wrangler Hood Prop Rod Holder "This is a hood rod clip for the Jeep Wrangler TJ printed in ABS. The version ""2.Brocho varilla cofreTornillo"" has a space for a nut to install more easyly." https://3dcarparts.org/library/1997/Jeep/Wrangler/hood-prop-rod-holder https://r2-upload.3dcarparts.workers.dev/file/parts/9f42b7f5-a81f-4830-aa9f-4818405f8a0a/images/hood-prop-rod-holder-1_1777442683509_8fyaqb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/hood-prop-rod-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c94de79d-4dab-4500-982d-c4f2cc9f2c19 2007 Jeep Wrangler D-Cell Maglite Mount "Maglite mount designed for mounting on a Jeep Wrangler JK seat rail but could be mounted anywhere. Printed with PETG for flexibility and temperature resistance. No supports and print as oriented for strength.
Installed on a Jeep Wrangler JK:
https://youtu.be/JyzzvfQCPMY" https://3dcarparts.org/library/2007/Jeep/Wrangler/d-cell-maglite-mount https://r2-upload.3dcarparts.workers.dev/file/parts/c94de79d-4dab-4500-982d-c4f2cc9f2c19/images/d-cell-maglite-mount-1_1777442679976_yr9chd.jpg in_stock 8.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/d-cell-maglite-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d67d97f-27c4-4ace-a04d-01b4d162da43 2016 Jeep Wrangler Tailgate Plug "After my dealership swapped out the spare carrier on my new 2016 JK, I noted a small oval shaped hole that was begging to get water in it. Water = rust, so I decided to look for a plug. Not finding one I liked, I decided to make one really quick before the storms came.
The plus was a bit tight once I printed it, so I downscaled it just a tad before publishing it here. If it's still too tight (or too loose now), please let me know and I will correct, I plan to make another using NinjaFlex so it will be easy to remove in the event that I need to." https://3dcarparts.org/library/2016/Jeep/Wrangler/tailgate-plug https://r2-upload.3dcarparts.workers.dev/file/parts/4d67d97f-27c4-4ace-a04d-01b4d162da43/images/tailgate-plug-1_1777442680153_pcmgst.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Jeep/Wrangler/tailgate-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-47fb227c-7b21-4130-81e9-a904bfade860 2018 Jeep Wrangler Door Key Hole Cover This is a simple key cover/hide for Jeep Wrangler JL and JL Unlimited. Simple print. https://3dcarparts.org/library/2018/Jeep/Wrangler/door-key-hole-cover https://r2-upload.3dcarparts.workers.dev/file/parts/47fb227c-7b21-4130-81e9-a904bfade860/images/door-key-hole-cover-1_1777442676714_u5uczp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2018/Jeep/Wrangler/door-key-hole-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-888a1067-59f3-4858-82e0-a00f37c639ba 2007 Jeep Wrangler Cup Holder "hi
this is a cup holder for jeep jk because the original jeep cup holder is so deep for small cup
i hope you will like it guys" https://3dcarparts.org/library/2007/Jeep/Wrangler/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/888a1067-59f3-4858-82e0-a00f37c639ba/images/cup-holder-1_1777442673005_6mupsm.jpg in_stock 25.42 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4198a7d7-b2c2-476f-bacc-8c1854baa1d8 2002 Jeep Wrangler Vent and Vanes "2002 Jeep Wrangler TJ. The vents were missing, missing parts, or cracked. Designed and printed new vents and vanes. The prototype ones in the photo are PLA which didn't survive the first cold day/hot vent application. The PLA warped substantially.
Will need in ABS or PETG for final." https://3dcarparts.org/library/2002/Jeep/Wrangler/vent-and-vanes https://r2-upload.3dcarparts.workers.dev/file/parts/4198a7d7-b2c2-476f-bacc-8c1854baa1d8/images/vent-and-vanes-1_1777442673950_c7zc7i.jpg in_stock 12.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Jeep/Wrangler/vent-and-vanes?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-42066bf9-608b-4edc-ba07-93c10515b313 2016 Jeep Wrangler Vent "It's for a 2016 Jeep Wrangler, not sure if it fits other models.
Best results I've gotten so far is to print standing up on the edge without the little hole.
I printed in PLA with 20% infill. First go-round the PLA was warped by the heat of the air coming out of the vent.
Recommend printing in ABS, PETG or other plastic with higher melting point" https://3dcarparts.org/library/2016/Jeep/Wrangler/vent https://r2-upload.3dcarparts.workers.dev/file/parts/42066bf9-608b-4edc-ba07-93c10515b313/images/vent-1_1777442667034_15v291.jpg in_stock 12.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Jeep/Wrangler/vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf543acd-284c-44e8-813b-39f683ff2a11 2007 Jeep Wrangler Shifter Knob "Jeep Wrangler JK Shifter Knob, snaps in place like the OEM would. You can add a little hot glue for extra security and it will still come off hassle free when needed (unlike automotive adhesive). Definitely recommend using some metallic filament for a nicer look (this was proof of concept).
Printed at 80% infill and suffice in strength." https://3dcarparts.org/library/2007/Jeep/Wrangler/shifter-knob https://r2-upload.3dcarparts.workers.dev/file/parts/bf543acd-284c-44e8-813b-39f683ff2a11/images/shifter-knob-1_1777442665380_n7tyh7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Jeep/Wrangler/shifter-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e5e9cd03-11e6-4b9b-9624-a656a2da2064 2006 Jeep Wrangler Hood Support Rod Clip This is the little clip that holds the metal rod, which holds open the hood, to the inside of the hood while not in use. This has only been test fit on a 2006 Jeep Wrangler LJ (Will definitely fit TJ's, possibly not newer Wranglers) https://3dcarparts.org/library/2006/Jeep/Wrangler/hood-support-rod-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e5e9cd03-11e6-4b9b-9624-a656a2da2064/images/hood-support-rod-clip-1_1777442664932_8odbma.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Jeep/Wrangler/hood-support-rod-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-843d02bf-f419-4683-ab61-6c4772be158a 1997 Jeep Wrangler Console Switch Blank "Made up a couple blanks for the center console switch area for my '01 Jeep TJ.
One is just a flat/filler blank, and the other has a cutout for the round rocker switches you see in the pics. (I did have to shave off just a little off the edges of the switch bezel for it to fit through.)
I wanted to add a switch for my winch relay, and one for a driving light relay. Since the cig. lighter has ignition switched 12V, wired up a few pigtails and spliced them into the leads going to the outlet, along with an inline fuse.
They aren't real pretty, but they snap in perfectly on mine.
I printed them upright with support." https://3dcarparts.org/library/1997/Jeep/Wrangler/console-switch-blank https://r2-upload.3dcarparts.workers.dev/file/parts/843d02bf-f419-4683-ab61-6c4772be158a/images/console-switch-blank-1_1777442667179_oxy0u0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Jeep/Wrangler/console-switch-blank?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c9c7356d-30a6-48bb-99a6-046a54f065c4 2013 Ford Focus Accessport Vent Clip The accessport is a great tool. I have created a clip for the A piller that worked well but it stuck out in my vision. I wanted something a little more discreet. This clip allows a clip in to the vent and cable to run through the air vent. https://3dcarparts.org/library/2013/Ford/Focus/accessport-vent-clip https://r2-upload.3dcarparts.workers.dev/file/parts/c9c7356d-30a6-48bb-99a6-046a54f065c4/images/accessport-vent-clip-3_1777439792377_isannh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Ford/Focus/accessport-vent-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a015115b-8c18-4e02-b0f5-95c7272600b0 2016 Ford Focus Washer Fluid Reservoir Cap "Cap to replace the broken washer fluid reservoir cap on our 2016 Ford Focus.
I printed this in TPU at 0.2mm with support only touching build plate and bridge settings turned on in Ultimaker Cura.
It seems to have worked and fit well; haven't tested it in PLA so not sure if that would work as well." https://3dcarparts.org/library/2016/Ford/Focus/washer-fluid-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/a015115b-8c18-4e02-b0f5-95c7272600b0/images/washer-fluid-reservoir-cap-1_1777439776346_y4t3qw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2016/Ford/Focus/washer-fluid-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-49bde860-78b7-4d4f-ad4f-ca769234d8d6 2012 Ford Focus Vent Mount Clip A vent clip that can be glued to other accessories. Designed to fit the center console vents. If the fit is too tight, trim a bit of the hooked part off on each side and it should fit perfectly (the vent blades should bend easily and slide in). Ideally, place on top of the vent control grip (which the clip will rest on) to prevent movement. Please note that the design has 0 tolerance and is very difficult to remove, and may require cutting the clip. https://3dcarparts.org/library/2012/Ford/Focus/vent-mount-clip https://r2-upload.3dcarparts.workers.dev/file/parts/49bde860-78b7-4d4f-ad4f-ca769234d8d6/images/vent-mount-clip-1_1777439774005_w8m1dv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/vent-mount-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3989209c-b8d8-432c-a8a4-4ac5d4f0b02a 2013 Ford Focus Windshield Washer Reservoir Cap "This cap is what I designed to replace the one that was lost in our 2013 Ford Focus sedan. The disappearance of the original remains a mystery. I was not successful with other means of restoring the function any in other way. I tried such Things as online purchases of OEM parts or downloads of the designs of others with no luck. I don’t blame anyone but myself for these frustrations.
I printed this on my Adimlab Gantry using TPU at 100% infill about a month ago and it survives still in spite the heat and other intense conditions found in the engine compartment.
The part was designed via OnShape. When you bring in the file to your slicer (Curs, repetier, , Slic3r, etc you may have to adjust the scale to get it to print it to life size. For example you may have to multiply it by 25.4 factor to get the scale correct. This is to adjust for conversion between metric and imperial units." https://3dcarparts.org/library/2013/Ford/Focus/windshield-washer-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/3989209c-b8d8-432c-a8a4-4ac5d4f0b02a/images/windshield-washer-reservoir-cap-1_1777439776739_rzvqfl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2013/Ford/Focus/windshield-washer-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9c61bb00-119f-4b66-aa3b-d7c8b324c5b7 2006 Ford Focus Bonnet Lock Linkage I designed the key lock from the most troublesome parts in ford focus vehicles. It was just fine, no problem. https://3dcarparts.org/library/2006/Ford/Focus/bonnet-lock-linkage https://r2-upload.3dcarparts.workers.dev/file/parts/9c61bb00-119f-4b66-aa3b-d7c8b324c5b7/images/bonnet-lock-linkage-1_1777439774607_u0a246.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Ford/Focus/bonnet-lock-linkage?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b8169180-d6ac-42ee-9c73-636de9aa4b09 2013 Ford Focus ST COBB Accessport AP3 Mount "this is a remix of the cobb ap3 mount for the focus st mk3 and mk3.5.
the original design was great but the access port did not really face the driver and angled down a little.
this remix angles the ap slightly more twords the driver and has a better viewing angle.
i very highly recommend this be printed with abs or abs pro.
i have tried printing this with petg and pla, but the second it hits 80+ degrees(American) outside they deform and fall off the A-pillar." https://3dcarparts.org/library/2013/Ford/Focus%20ST/cobb-accessport-ap3-mount https://r2-upload.3dcarparts.workers.dev/file/parts/b8169180-d6ac-42ee-9c73-636de9aa4b09/images/cobb-accessport-ap3-mount-1_1777439764798_omgnsf.jpg in_stock 13.50 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Ford/Focus%20ST/cobb-accessport-ap3-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-660ef037-2b67-47f5-8feb-1729a14543ec 2013 Ford Focus Parcel Shelf Mounting Peg This is a replacement mounting peg for the parcel shelf in a Ford Focus 2013-2016. https://3dcarparts.org/library/2013/Ford/Focus/parcel-shelf-mounting-peg https://r2-upload.3dcarparts.workers.dev/file/parts/660ef037-2b67-47f5-8feb-1729a14543ec/images/parcel-shelf-mounting-peg-1_1777439764808_vqkqwy.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Ford/Focus/parcel-shelf-mounting-peg?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-df4dfed9-5c03-47d4-9c28-6b505f483d0b 2003 Ford Focus / C-Max Mirror Lamp "Mirror lamp FORD for:
Focus/C-max 23.06.2003-15.01.2008
C-Max 26.03.2007-23.07.2010" https://3dcarparts.org/library/2003/Ford/Focus%20%2F%20C-Max/mirror-lamp https://r2-upload.3dcarparts.workers.dev/file/parts/df4dfed9-5c03-47d4-9c28-6b505f483d0b/images/mirror-lamp-1_1777439764487_y9vvbh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2003/Ford/Focus%20%2F%20C-Max/mirror-lamp?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fb6b5ae2-fde0-43ed-8438-81bfea2ea42c 2012 Ford Focus Center Console Tray Center console tray for a 2012-2014 Ford Focus. This fits the center console were the ebrake is next to the cupholders not next to the shifter. I have made various versions so pick what you like. PETG or better is recommend for printing. https://3dcarparts.org/library/2012/Ford/Focus/center-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/fb6b5ae2-fde0-43ed-8438-81bfea2ea42c/images/center-console-tray-1_1777439764314_bl8o5o.jpg in_stock 21.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/center-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e3eccaf5-5262-40cc-96db-a2b897522d85 2012 Ford Focus Privacy Shelf Retaining Pin "This is a part used in Ford Focus hatchbacks (C346 from model years 2012-2018) to connect the privacy shelf to the rear hatch/door. The equivalent OEM part number is DV6Z-58519A16-AA. Instead of paying $10 each to buy them from a dealership you can print them yourself for less than $0.10.
I recommend printing the part ""laying down"" with supports as shown in the picture. The shape will be a little rougher than printing the part standing up, but it will be much stronger against the shear loading it experiences while on the vehicle.
I used ASA, but PLA or ABS should also work. I printed one at 0.1 mm resolution and one at 0.2 mm resolution. The one with 0.1 mm resolution feels like it has a better fit with the mating part." https://3dcarparts.org/library/2012/Ford/Focus/privacy-shelf-retaining-pin https://r2-upload.3dcarparts.workers.dev/file/parts/e3eccaf5-5262-40cc-96db-a2b897522d85/images/privacy-shelf-retaining-pin-1_1777439754514_l74sa2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/privacy-shelf-retaining-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9191b146-49e1-4a9c-bd01-ca167bef00b8 2012 Ford Focus Dash Phone Mount Clip "For Ford Focus 2012 SE
Base clip to mount phone clip to.
Phone clip for Pixel 2 XL with Slim Spigen case (79.5mm wide X 9.6mm thick)
Both driver and passenger sides.
The dash mount portion was remixed from https://www.thingiverse.com/thing:686720
The phone clip portion was from Thomas Sanladerer's mount available here https://cad.onshape.com/documents/8151a0bacb3e1d8fe631c341/w/07004572a608b2270631e506/e/8a83e1e98ca44f524a34682b (His uses a GoPro mount and the phone clip is for a LG G6)" https://3dcarparts.org/library/2012/Ford/Focus/dash-phone-mount-clip https://r2-upload.3dcarparts.workers.dev/file/parts/9191b146-49e1-4a9c-bd01-ca167bef00b8/images/dash-phone-mount-clip-1_1777439748319_tvtq3u.jpg in_stock 17.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/dash-phone-mount-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ca092a9a-a4e8-4d9f-9f24-a807fece9d76 2014 Ford Focus Cargo Cover Hanger This is a simple replacement part for the regular string cargo cover hanger, utilizing paracord. The material is ASA- let's see long it holds up in a hot car in the summertime. https://3dcarparts.org/library/2014/Ford/Focus/cargo-cover-hanger https://r2-upload.3dcarparts.workers.dev/file/parts/ca092a9a-a4e8-4d9f-9f24-a807fece9d76/images/cargo-cover-hanger-1_1777439748885_a0f79r.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Ford/Focus/cargo-cover-hanger?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c90fa034-f2b7-4ec4-b7d1-1532bda3e53e 2000 Ford Focus Bumper Plug front and rear bumper plugs https://3dcarparts.org/library/2000/Ford/Focus/bumper-plug https://r2-upload.3dcarparts.workers.dev/file/parts/c90fa034-f2b7-4ec4-b7d1-1532bda3e53e/images/bumper-plug-1_1777439744336_f2ial4.jpg in_stock 7.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Ford/Focus/bumper-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13ba6881-6003-488c-86a7-ab76d7bf62a2 2005 Ford Focus Trunk Light Cover "With a wire you can have light in both sides of the trunk.
Must have for Focusier :D
Print it with Clear Filament" https://3dcarparts.org/library/2005/Ford/Focus/trunk-light-cover https://r2-upload.3dcarparts.workers.dev/file/parts/13ba6881-6003-488c-86a7-ab76d7bf62a2/images/trunk-light-cover-1_1777439738377_kom99o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Focus/trunk-light-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-255b8ae2-1088-42ab-8a3b-9b0376b702b0 2015 Ford Focus Sportbreak Phone Mount / Holder (OnePlus One) OnePlus One holder for Ford Focus Sportbreak 2015 Sony radio. Holder for the OnePlus One. You just need to unscrew two screws located under the radio panel and screw them back once the holder piece is in place. The holder is designed to place the phone with the transparent plastic protective case for the OnePlus One. https://3dcarparts.org/library/2015/Ford/Focus%20Sportbreak/phone-mount-holder-oneplus-one https://r2-upload.3dcarparts.workers.dev/file/parts/255b8ae2-1088-42ab-8a3b-9b0376b702b0/images/phone-mount-holder-oneplus-one-1_1777439741850_sd5xi0.jpg in_stock 7.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Ford/Focus%20Sportbreak/phone-mount-holder-oneplus-one?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-16d42ef4-1df4-486e-9228-cca823f3c6cd 2008 Ford Focus LED Fog Light Mount Adapter "adapter mount to fit 70mm LED fog light further forward flush with external ring.
flip upside down before printing.
or you will have a lot of scrap scafolding
would love to hear comments" https://3dcarparts.org/library/2008/Ford/Focus/led-fog-light-mount-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/16d42ef4-1df4-486e-9228-cca823f3c6cd/images/led-fog-light-mount-adapter-1_1777439740650_5be12m.jpg in_stock 17.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2008/Ford/Focus/led-fog-light-mount-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e6e118a2-f398-4f2f-967e-07e6872e2b88 2015 Ford Focus Windshield Wiper Blade Clip My son needed some replacement clips to hold the windshield wiper blades to the arms on his 2015 Ford Focus. These seem to do the trick. https://3dcarparts.org/library/2015/Ford/Focus/windshield-wiper-blade-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e6e118a2-f398-4f2f-967e-07e6872e2b88/images/windshield-wiper-blade-clip-1_1777439734850_e5gia3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2015/Ford/Focus/windshield-wiper-blade-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7ef92c01-a9c8-4442-bfaa-24a2f2b6f35d 2008 Ford Focus Tail Light Cover Clip "This is a ford focus tail light cover clip
It's for a ford focus 2008 sedan
I don't know what other cars you can use it in
I didn't see others out there so i decided to make it myself" https://3dcarparts.org/library/2008/Ford/Focus/tail-light-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/7ef92c01-a9c8-4442-bfaa-24a2f2b6f35d/images/tail-light-cover-clip-1_1777439734852_wzvz7h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Ford/Focus/tail-light-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-337d47b9-a071-4997-a483-c8e1e1bc371f 2009 Ford Focus Fuel Tank Door "Somebody stole my car's fuel tank door,
printed one until i get a replacement,
I don't know how PLA will hold in the in the sun and heat of Israel
In order for the snap hooks to be strong enough and not brake appart when mounting it in the car I had to print the model standing on its side so the force is not in the direction of the layer (or printing bed)
i also split it in the middle to match the printers height." https://3dcarparts.org/library/2009/Ford/Focus/fuel-tank-door https://r2-upload.3dcarparts.workers.dev/file/parts/337d47b9-a071-4997-a483-c8e1e1bc371f/images/fuel-tank-door-1_1777439734597_mk5sb7.jpg in_stock 21.48 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Ford/Focus/fuel-tank-door?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-79fe1265-dd91-42e9-8f6f-10a5b0af86a7 2005 Ford Focus Handbrake Cover Frame Only for ford focus 2 2005-2007 years. https://3dcarparts.org/library/2005/Ford/Focus/handbrake-cover-frame https://r2-upload.3dcarparts.workers.dev/file/parts/79fe1265-dd91-42e9-8f6f-10a5b0af86a7/images/handbrake-cover-frame-1_1777439729085_vlv2h4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Focus/handbrake-cover-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b658fa85-09b0-406b-85d5-c214946a03cd 1996 Honda Civic Shift Knob "A very simple but comfortable shift knob.
-----------------------------------------------------
A very simple but very comfortable gear lever." https://3dcarparts.org/library/1996/Honda/Civic/shift-knob https://r2-upload.3dcarparts.workers.dev/file/parts/b658fa85-09b0-406b-85d5-c214946a03cd/images/shift-knob-1_1777439722852_74j36e.jpg in_stock 7.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Honda/Civic/shift-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0fe901ce-f694-408c-ac56-627888be9d2c 1987 Ford Mustang Rear Cigarette Tray Receptacle "This is the rear cigarette tray receptacle for a 1987-1993 Mustang.
This replaced the broken tray receptacle in my '88 GT. It was a different time...2 ashtrays and no cup holders...
PLEASE DO NOT ACTUALLY USE THE REAR ASHTRAY AS THIS RECEPTACLE DOESN'T ENCLOSE THE ASHTRAY LIKE THE STOCK PART DID. ASHES COULD ESCAPE AND CAUSE A FIRE!!!
For me, the best way to print this part is vertically with supports." https://3dcarparts.org/library/1987/Ford/Mustang/rear-cigarette-tray-receptacle https://r2-upload.3dcarparts.workers.dev/file/parts/0fe901ce-f694-408c-ac56-627888be9d2c/images/rear-cigarette-tray-receptacle-2_1777439060974_tctltz.jpg in_stock 7.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Ford/Mustang/rear-cigarette-tray-receptacle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-717a4707-bca5-4b6c-8928-e543ffd8bdb1 2005 Fiat Grande Punto Sunscreen Clips Fiat Grande Punto 2005 Sunscreen clips https://3dcarparts.org/library/2005/Fiat/Grande%20Punto/sunscreen-clips https://r2-upload.3dcarparts.workers.dev/file/parts/717a4707-bca5-4b6c-8928-e543ffd8bdb1/images/8a272e9d49eef70727ba1195601d2443_1776786235225_nvxtjx.png in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Fiat/Grande%20Punto/sunscreen-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4a61602f-12ac-4749-8407-e85373124540 1984 Toyota MR2 Dome Light Lens "A nice easy to print dome light lens for old Toyotas.
Designed for my 88' MR2 to replace Toyota Part No.: 81241-20060
Fits good and snug in my MR2 and pre-Tacoma pickup.
It's 2mm thick which gives nice diffusion with translucent/transparent filament with about .5mm of top and bottom and 20-50% gyroid infill.
With opaque white/color filament, .25mm bottom and no top layers should look really good.
Prints face down with no support needed.
Should fit:
Toyota 4Runner 1984-1995
Toyota Camry 1983-1991
Toyota Celica 1979-1989
Toyota Corolla 1980-1988
Toyota Corona 1979-1982
Toyota Cressida 1981-1984
Toyota Land Cruiser 1981-1990
Toyota MR2 1985-1989
Toyota Pickup 1984-1995
Toyota T100 1994-1998
Toyota Tercel 1980-1990
Toyota Van 1984-1989" https://3dcarparts.org/library/1984/Toyota/MR2/dome-light-lens https://r2-upload.3dcarparts.workers.dev/file/parts/4a61602f-12ac-4749-8407-e85373124540/images/dome-light-lens-1_1776621561461_3eapd7.jpg in_stock 7.11 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1984/Toyota/MR2/dome-light-lens?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b083d906-7546-4c51-9852-f6347218e97f 1983 Nissan 300ZX Interior Mirror Cover I created some interior mirror covers after mine broke. I wanted to make them so that they could be printed with rigid material and still work. I have test fitted many and they work well. I uploaded them with and without a logo. https://3dcarparts.org/library/1983/Nissan/300ZX/interior-mirror-cover https://r2-upload.3dcarparts.workers.dev/file/parts/b083d906-7546-4c51-9852-f6347218e97f/images/interior-mirror-cover-9_1776621592982_071jqa.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1983/Nissan/300ZX/interior-mirror-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d0e9cfe8-b158-4853-8af8-9724e5684aee 2003 Mazda 3 Dashboard Plug This is a cover at the Mazda 3 dashboard, next to the DSC OFF switch. https://3dcarparts.org/library/2003/Mazda/3/dashboard-plug https://r2-upload.3dcarparts.workers.dev/file/parts/d0e9cfe8-b158-4853-8af8-9724e5684aee/images/dashboard-plug-1_1776621558738_lbyaum.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Mazda/3/dashboard-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0497bf95-1549-4e56-808a-f52c48393ac4 1989 Nissan S13 Wiper Arm Pivot Dust Seal "After printing off a redesigned wiper arm pivot bracket for my Nissan S13 200sx (https://www.thingiverse.com/thing:2961561) i found the standard dust cover didn't fit, due to the larger diameter for the bearings.
I designed this to be printed in TPU allowing it to slide over and offer the same ""sealing"" effect as the standard one.
This should also work for the S14 and S15 Nissans as i believe they all use the same wiper arm pivot" https://3dcarparts.org/library/1989/Nissan/S13/wiper-arm-pivot-dust-seal https://r2-upload.3dcarparts.workers.dev/file/parts/0497bf95-1549-4e56-808a-f52c48393ac4/images/wiper-arm-pivot-dust-seal-1_1776621561968_3y9dzd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1989/Nissan/S13/wiper-arm-pivot-dust-seal?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b7220163-7842-428b-9643-c83453fb7fa3 1989 Nissan 240SX Quarter Window Switch Cap Replacement quarter window switch caps for the Nissan 240sx Convertible. https://3dcarparts.org/library/1989/Nissan/240SX/quarter-window-switch-cap https://r2-upload.3dcarparts.workers.dev/file/parts/b7220163-7842-428b-9643-c83453fb7fa3/images/quarter-window-switch-cap-1_1776621560238_qbwrde.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Nissan/240SX/quarter-window-switch-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a11d5928-2daa-435e-8c56-ae444e65d534 1989 Nissan 200SX/240SX Pop-Up Headlight Motor Adjuster Cap "Was missing one of the caps for my S13 Motor Adjuster, so made another
PLA 20% infill currently but plan to reprint in PETG (as under the bonnet) with 25%" https://3dcarparts.org/library/1989/Nissan/200SX%2F240SX/pop-up-headlight-motor-adjuster-cap https://r2-upload.3dcarparts.workers.dev/file/parts/a11d5928-2daa-435e-8c56-ae444e65d534/images/pop-up-headlight-motor-adjuster-cap-1_1776621557100_56ezf4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1989/Nissan/200SX%2F240SX/pop-up-headlight-motor-adjuster-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-825e4d14-bdee-4921-83d6-e7203b1d37a1 1979 Ford Mustang Hood Prop Retaining Clip A hood prop retaining clip I made for my 1990 Ford Mustang. It is modeled as close to stock as possible and requires supports. I also made a no supports version that is flat on one side so it should be easier to print. https://3dcarparts.org/library/1979/Ford/Mustang/hood-prop-retaining-clip https://r2-upload.3dcarparts.workers.dev/file/parts/825e4d14-bdee-4921-83d6-e7203b1d37a1/images/hood-prop-retaining-clip-1_1776621570939_sdyy69.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1979/Ford/Mustang/hood-prop-retaining-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7033cef8-0b42-4833-97f4-a3c1dc7ea35b 1983 Ford Mustang Window Guide I needed a couple of these for the restoration of my Fox, so hopefully someone out there can use them too and save a hundred bucks. Only the horizontal hole for the pin to channel must be drilled, otherwise this is a complete design. https://3dcarparts.org/library/1983/Ford/Mustang/window-guide https://r2-upload.3dcarparts.workers.dev/file/parts/7033cef8-0b42-4833-97f4-a3c1dc7ea35b/images/window-guide-1_1776621552227_jwzzya.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1983/Ford/Mustang/window-guide?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1fd26b6e-db8a-459e-8a9b-d86306022330 2014 Chevrolet Corvette Gas Filler Door Lock Disable Plug "I have not had the problem personally but there are a fair number of reports of C7 drivers being unable to open their gas tank fill cover because the lock gets jammed. The lock can be disabled by blocking the hole into which the locking lever usually extends. Some folks use plastic push pins or rivets or even bolts and nuts. This thing is a custom made locking pin just for this purpose. It has a small ear that locks the pin in the hole in the filler door once it is pressed into place. The pin itself is split so it can easily be removed by pressing the leg with the locking ear so it disengages.
Print 100% infill with supports and rafts." https://3dcarparts.org/library/2014/Chevrolet/Corvette/gas-filler-door-lock-disable-plug https://r2-upload.3dcarparts.workers.dev/file/parts/1fd26b6e-db8a-459e-8a9b-d86306022330/images/gas-filler-door-lock-disable-plug-1_1776621551757_dctb9f.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2014/Chevrolet/Corvette/gas-filler-door-lock-disable-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8edf2f3c-d4f9-410e-9312-15524aa5437a 1998 BMW 3 Series Cup Holder Adapter "Cupholder adapter to add a 3rd cupholder slot to the 3-series e46. Designed and fitted for a e46 330xi, this cupholder replaces the existing coin tray and rotating assembly.
The top tier (95.4mm) fits the 32oz and 40oz Hydroflask (91mm diameter) and some silicone boots.
1.1 Revision
Tier 1 Minor Diameter trim (84mm - 78mm)
Alignment Guides for plastic tensioners
Skirt fitment and trim
1.2
Clip Fitment and Reinforcement
Fastening Peg Alignment" https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/8edf2f3c-d4f9-410e-9312-15524aa5437a/images/cup-holder-adapter-1_1776621552361_qyv6o4.jpg in_stock 22.21 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/BMW/3%20Series/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c6e02bfb-c68a-4ada-aead-7987c9098bbf 2004 BMW 3 Series Headlight Switch Knob Cap "When my dad was getting into his BMW 335i not too long ago, his knee hit the headlight knob and broke it. It turns out that the part of the knob that is keyed to the switch is notoriously weak.
He ordered a replacement but it was going to take a month + to get it from a third party seller on amazon and so we drew this up.
It's a direct replacement for the normal knob. The hex is keyed so you'll be able to have the knob oriented in the same way as the factory one, and it has the tail so that it won't let you rotate it further than you're supposed to.
**Here's the fitment info from the amazon knob:**
Replacement AUTO Head-Light Lamp Switch Knob Button Cap for BMW 1 Series E88 E82 / 3 Series E90 E91 X1 E84 318 320 325 330 335
OE NO.:
6131 6932 794 E90
6131 9169 405 X1
Application:
For BMW E90 E91 E92 X1 E84 E82 E88
Link to the normal knob:
https://www.amazon.com/Replacement-AUTO-Head-Light-Switch-Button/dp/B07ZTPQF8W/ref=sr_1_2" https://3dcarparts.org/library/2004/BMW/3%20Series/headlight-switch-knob-cap https://r2-upload.3dcarparts.workers.dev/file/parts/c6e02bfb-c68a-4ada-aead-7987c9098bbf/images/headlight-switch-knob-cap-1_1776621552037_fqwz6i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/BMW/3%20Series/headlight-switch-knob-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c92b98b9-6cd6-4f3f-8fed-9a5364878d4f 1998 BMW 3 Series Trunk/Boot Handle Repair Insert Made for my 2001 e46 sedan, there are to sizes needed for the outer and inner part so print 2 of each part and glue into your broken boot handle. its a very tight fit so may need sanding/reducing in size slightly in your slicer of choice. https://3dcarparts.org/library/1998/BMW/3%20Series/trunkboot-handle-repair-insert https://r2-upload.3dcarparts.workers.dev/file/parts/c92b98b9-6cd6-4f3f-8fed-9a5364878d4f/images/trunkboot-handle-repair-insert-1_1776621550023_n3o5rs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/BMW/3%20Series/trunkboot-handle-repair-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cbcc1366-acd1-4e12-a581-f946b3c7b0c3 2003 BMW 3 Series Clutch Alignment Tool "22 spline clutch tool used for post 03 3 series. This was specifically for the m54 b25. The shaft is 15mm (into pilot bearing) and the spline circle diameter is 29mm. This size might have also been used for 6 speed but I don't know. The tool itself does not have a handle but you could easily extend it's length in blender. Main reason I didn't make one is because the printing would take much longer. It is possible to ""weld"" the PLA with a hot knife onto another piece if you want to model one, or I can. Comment below if that's something you are interested in. You can also use a bolt to push into the supports. The PLA plastic is thin enough to be molded by the threads.
I used Mattercontrol for this." https://3dcarparts.org/library/2003/BMW/3%20Series/clutch-alignment-tool https://r2-upload.3dcarparts.workers.dev/file/parts/cbcc1366-acd1-4e12-a581-f946b3c7b0c3/images/clutch-alignment-tool-1_1776621548943_jo8crn.jpg in_stock 8.33 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2003/BMW/3%20Series/clutch-alignment-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7be1f6c-dd36-448f-938a-ab5b1d80b4be 2004 BMW 3 Series Retractable Armrest Rail Locking Piece "My locking piece was missing so I designed this one.
Printed in PETG, secured with 4mm screw for plastic" https://3dcarparts.org/library/2004/BMW/3%20Series/retractable-armrest-rail-locking-piece https://r2-upload.3dcarparts.workers.dev/file/parts/f7be1f6c-dd36-448f-938a-ab5b1d80b4be/images/retractable-armrest-rail-locking-piece-1_1776621550791_za1z29.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/BMW/3%20Series/retractable-armrest-rail-locking-piece?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-476b3e0b-1be4-4ac3-ab75-47f97ef2d848 2006 Ford Focus Automatic Shifter Button This is a replacement shifter button for a Ford Focus 2006 automatic shifter button. you will need to print with supporting structure. Clean up after printing and paint then it snaps right in. Make sure that the old plastic parts are removed before insetting the new part. Once it clips in it does not come out unless it breaks. https://3dcarparts.org/library/2006/Ford/Focus/automatic-shifter-button https://r2-upload.3dcarparts.workers.dev/file/parts/476b3e0b-1be4-4ac3-ab75-47f97ef2d848/images/automatic-shifter-button-1_1776621547558_l8mxlm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Ford/Focus/automatic-shifter-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-37deccf8-b3d8-457c-89fb-b0530e511c43 2003 Ford C-Max Headlight Bracket "This is a bracket for Ford Focus C-Max mk1 (2003-2010) headlight.
The original one on mine was broken and this was a MOT fail.
Printed mine in PLA.
Update: PLA proved to be too sensitive to the underbonnet heat - definitely use something more heat-resistant, like PET-G or ABS." https://3dcarparts.org/library/2003/Ford/C-Max/headlight-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/37deccf8-b3d8-457c-89fb-b0530e511c43/images/headlight-bracket-1_1776621546844_5dmvy7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2003/Ford/C-Max/headlight-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e81db845-d9a0-41dd-a2d0-9eafd4d12d26 2012 Ford Focus Sync 3 Radio Bracket "Brackets for replacing the base radio with Sync 3. Might work with MFT/Sync 2 also. Designed for 2012 Focus w/ 2 line base radio/screen that you can see in 5th picture.
Print every STL once. You can use screws that come with Sync 3 to attach it to the bracket and Ford screws from original radio to attach brackets to car." https://3dcarparts.org/library/2012/Ford/Focus/sync-3-radio-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e81db845-d9a0-41dd-a2d0-9eafd4d12d26/images/sync-3-radio-bracket-1_1776621549667_z8x98c.jpg in_stock 8.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/sync-3-radio-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-76573a51-e9f1-48c7-af5b-55f2fba119d9 2000 Ford Focus Cargo Cover Bracket Printable without support https://3dcarparts.org/library/2000/Ford/Focus/cargo-cover-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/76573a51-e9f1-48c7-af5b-55f2fba119d9/images/cargo-cover-bracket-1_1776621543315_dng0kb.jpg in_stock 9.08 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Ford/Focus/cargo-cover-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cce58e3c-474d-4cd0-85ea-44186936c28c 2008 Chevrolet Silverado Rear Door Speaker Adapter My buddy wanted to put a 8 inch speaker in the rear doors of his 2008 Silverado. The specific truck was a extended cab, not a crew cab! I will reach out for finished product pics but from his feedback, it worked. Split the body in two pieces to help with smaller printers. https://3dcarparts.org/library/2008/Chevrolet/Silverado/rear-door-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/cce58e3c-474d-4cd0-85ea-44186936c28c/images/rear-door-speaker-adapter-1_1776621543266_4ndcak.jpg in_stock 21.45 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Chevrolet/Silverado/rear-door-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1d99939e-47b4-4b62-ad92-13bbf54f3d96 1983 Nissan 300ZX Console Accessory Mount Can be 3D printed but wuould highly recommend forming from 2mm sheet aluminum https://3dcarparts.org/library/1983/Nissan/300ZX/console-accessory-mount https://r2-upload.3dcarparts.workers.dev/file/parts/1d99939e-47b4-4b62-ad92-13bbf54f3d96/images/console-accessory-mount-1_1776621541493_sy1j88.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1983/Nissan/300ZX/console-accessory-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0a9ad2dc-9ee2-4179-8081-60e15b090158 2006 Kia Ceed Light Cap 2006 Kia Ceed Light Cap 3D printable automotive replacement part. https://3dcarparts.org/library/2006/Kia/Ceed/light-cap https://r2-upload.3dcarparts.workers.dev/file/parts/0a9ad2dc-9ee2-4179-8081-60e15b090158/images/light-cap-1_1776621538689_s6s9yp.jpg in_stock 9.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2006/Kia/Ceed/light-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e3a22184-1e9b-4612-b37d-fc4622f1dc3c 2000 BMW 3 Series Engine Cover Bolt Plug These little covers are notorious for breaking and/or getting lost, so I created a 3D file. The one in the photo was printed on an FDM printer in ABS, and the thin legs broke off after removing it. I think PETG or a more flexible material would be better and last longer. Printing on an SLA or DLP printer in a strong resin would be ideal. https://3dcarparts.org/library/2000/BMW/3%20Series/engine-cover-bolt-plug https://r2-upload.3dcarparts.workers.dev/file/parts/e3a22184-1e9b-4612-b37d-fc4622f1dc3c/images/engine-cover-bolt-plug-1_1776621541552_o7wsbg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2000/BMW/3%20Series/engine-cover-bolt-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8021e3a0-a122-4079-a246-68af347121fa 1998 Ford Focus Headlight Washer Cover Here some Headlight washer cover for Focus MK1 https://3dcarparts.org/library/1998/Ford/Focus/headlight-washer-cover https://r2-upload.3dcarparts.workers.dev/file/parts/8021e3a0-a122-4079-a246-68af347121fa/images/headlight-washer-cover-1_1776621538215_6fpmjb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Ford/Focus/headlight-washer-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3e1a82e6-7a45-4004-975e-99553a320b4f 2000 Ford Focus Front bumper cap Front bumper plug for the Ford Focus https://3dcarparts.org/library/2000/Ford/Focus/front-bumper-cap https://r2-upload.3dcarparts.workers.dev/file/parts/3e1a82e6-7a45-4004-975e-99553a320b4f/images/front-bumper-cap-1_1776621540570_3hjz6o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Ford/Focus/front-bumper-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-961372c9-68f0-447e-9c14-b2d2a098a26d 2011 Ford Focus Parcel Shelf Bracket A second version of the Mk3 Ford Focus Parcel Shelf Bracket, a little bit closer to the original Ford part although as with the V1 the measurements and dimensions are approximated will do a Version 3 when I get the chance to measure an original thanks for looking :-) https://3dcarparts.org/library/2011/Ford/Focus/parcel-shelf-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/961372c9-68f0-447e-9c14-b2d2a098a26d/images/parcel-shelf-bracket-1_1776621534083_4mpsid.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Ford/Focus/parcel-shelf-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fa2f4ce9-feff-47ac-8a59-8bc89f587c7e 2013 Ford Focus Security Shade Hinge Pin "2013 Ford Focus Hatchback Security Shade Hinge Pin
A bolt and nut that replaces the hinge pin that secures a security shade on a 2013 Ford Focus hatchback." https://3dcarparts.org/library/2013/Ford/Focus/security-shade-hinge-pin https://r2-upload.3dcarparts.workers.dev/file/parts/fa2f4ce9-feff-47ac-8a59-8bc89f587c7e/images/security-shade-hinge-pin-1_1776621534923_5nfjea.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Ford/Focus/security-shade-hinge-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1e1caa09-1c09-4d23-94d5-056824d887f5 2012 Ford Focus Parcel Shelf Latch My 2012 Ford Focus parcel shelf hinge plastic pieces often get ripped out of the parcel shelf to the point that the parcel shelf is too worn for the plastic pieces to grab onto. I designed this piece to replace the inner (center) part of the hinge so that it has a wide surface to staple/stitch/sewn onto the (possibly worn) parcel shelf; and on the other hand facilitates the outer piece to clip onto. Since trunk interior can get pretty hot, please print in PETG or ABS. Since you can either staple, stitch or sewn the piece to the parcel shelf, no holes were made into the design. Please drill your own holes. https://3dcarparts.org/library/2012/Ford/Focus/parcel-shelf-latch https://r2-upload.3dcarparts.workers.dev/file/parts/1e1caa09-1c09-4d23-94d5-056824d887f5/images/parcel-shelf-latch-1_1776621534829_5ciatp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/parcel-shelf-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-49932097-c8a4-46fc-8af8-8133fa2f6f9e 1998 Ford Focus Wheel Center Cap "WHEEL CAP for original Ford Focus Mk1 aluminum alloy wheels.
LIKE IT- SHARE IT- MAKE IT- POST IT :)" https://3dcarparts.org/library/1998/Ford/Focus/wheel-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/49932097-c8a4-46fc-8af8-8133fa2f6f9e/images/wheel-center-cap-1_1776621535392_qm75fg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Ford/Focus/wheel-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5b251ce0-d040-4c92-a7ce-1ace0c3107ec 2000 Ford Focus Speaker Ring "This is the final version for me.
I have both sides printed and mounted in car and they are holding up well.
I highly recommend PETG or ABS or any other filament that can handle high operating temperatures.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jHB5crjIlmG" https://3dcarparts.org/library/2000/Ford/Focus/speaker-ring https://r2-upload.3dcarparts.workers.dev/file/parts/5b251ce0-d040-4c92-a7ce-1ace0c3107ec/images/speaker-ring-1_1776621532963_bd8l7i.jpg in_stock 23.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Ford/Focus/speaker-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8bd4c9f1-6255-44e2-9758-63bfe0038588 2004 Ford Focus Dashboard Storage Box Repair Kit FORD FOCUS MK2 - DASHBOARD STORAGE BOX REPAIR KIT https://3dcarparts.org/library/2004/Ford/Focus/dashboard-storage-box-repair-kit https://r2-upload.3dcarparts.workers.dev/file/parts/8bd4c9f1-6255-44e2-9758-63bfe0038588/images/dashboard-storage-box-repair-kit-1_1776621531283_b9bgxj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/dashboard-storage-box-repair-kit?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-28070b42-31c9-4661-8c23-baedeb94d0f8 2005 Ford Focus Headlight Washer Cover Ford Focus MK2 ST Headlight Washer Cover Passenger https://3dcarparts.org/library/2005/Ford/Focus/headlight-washer-cover https://r2-upload.3dcarparts.workers.dev/file/parts/28070b42-31c9-4661-8c23-baedeb94d0f8/images/headlight-washer-cover-1_1776621532975_x9y3mn.jpg in_stock 10.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Ford/Focus/headlight-washer-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-553b9f81-a14e-49e0-8a05-5fa9c1c470c8 2014 Ford Focus H7 LED Bulb Adapter "H7 Led Adapter Ford Focus 3 Phase 2
* Layer height: Between 0.2 and 0.15
* Supports are needed, extremely easy to remove
* Recommended materials: Nylon or another that support high temperatures" https://3dcarparts.org/library/2014/Ford/Focus/h7-led-bulb-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/553b9f81-a14e-49e0-8a05-5fa9c1c470c8/images/h7-led-bulb-adapter-1_1776621534036_5mdu5u.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2014/Ford/Focus/h7-led-bulb-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2475b29-af5e-47b0-be70-0aa42aebbb52 2004 Ford Focus Center Console Organizer "This is based on the original made by jhrbton,
I've modified it to allow a simple coin holder, a small storage space and allows two 20mm diameter switches, in my case retrofitted heated seats." https://3dcarparts.org/library/2004/Ford/Focus/center-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/b2475b29-af5e-47b0-be70-0aa42aebbb52/images/center-console-organizer-1_1776621530511_ctf8tv.jpg in_stock 26.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/center-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e8b56a6a-c90b-4bc6-b9cb-1a3a984733da 2004 Ford Focus Floor Mat Retainer "These should hold the floor mat under the drivers feet, keep it from moving.
the little part should be printed on its side for strength,
due to its size the lugs are easily broken when removing the scaffolding.
a small file may come in handy
separate files in case you only need one part at a time
let me know what you think
thanks in advance
ian" https://3dcarparts.org/library/2004/Ford/Focus/floor-mat-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/e8b56a6a-c90b-4bc6-b9cb-1a3a984733da/images/floor-mat-retainer-1_1776621531856_8zrm9a.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/floor-mat-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6bd34e91-bf5f-4e72-9fcc-40a95d82b57f 2016 Ford Focus Door Speaker Adapter Ring "I recommend printing this with PETG, maybe ABS, PLA is not a good idea due to heat and it's tendency to sag/ warp, it does not NEED supports, all overhangs are hidden. 20 ish % infill +/- with 3+ perimeters is recommended, but I won't tell you how ti live your life.
This is made to fit my 2016 Focus ST, but it'll likely fit many more cars. One is slotted for wires, the other you can make your own with a dremel or drill.
loosely based off Metra 825605
It wasn't designed to use as little filament as possible, it was designed for long term strength." https://3dcarparts.org/library/2016/Ford/Focus/door-speaker-adapter-ring https://r2-upload.3dcarparts.workers.dev/file/parts/6bd34e91-bf5f-4e72-9fcc-40a95d82b57f/images/door-speaker-adapter-ring-1_1776621532856_4c819i.jpg in_stock 21.68 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Ford/Focus/door-speaker-adapter-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6960a818-a3e4-4fe7-b7bd-00467aab8177 1998 Ford Focus Cup Holder A simple replacement cup holder for the drivers side slot printed as two pieces to reduce support needs. https://3dcarparts.org/library/1998/Ford/Focus/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/6960a818-a3e4-4fe7-b7bd-00467aab8177/images/cup-holder-1_1776621529940_vp3y3x.jpg in_stock 20.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Ford/Focus/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dcd6aa2e-5675-42fb-8c22-e9ad507eb560 2004 Ford Focus Button Cover Plate "Cover plate for the switches at the middle console with rear window heating ect.
May not be precisely made but it does click in place and makes a cover.
The one with hole is diameter 17mm for a switch." https://3dcarparts.org/library/2004/Ford/Focus/button-cover-plate https://r2-upload.3dcarparts.workers.dev/file/parts/dcd6aa2e-5675-42fb-8c22-e9ad507eb560/images/button-cover-plate-1_1776621529016_f1iaxa.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/button-cover-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-81f84d1e-cba8-44a9-a097-9c804a2b6114 2007 Ford Focus Number Plate Light Shield "This is a replacement shield for the number plate light for at least a Ford Focus of year 2007.
When the maintenance guy lost the shield for the second time when replacing the apparently broken light, I grew less of buying an entire new light assembly. I took a look at the remaining one, and made a replacement part. (Without the shield, light shines up into the door, and up through the rear window which is annoying when driving in the dark)
I have done multiple successful prints in ABS with 0.2 mm layers and 0.4 mm nozzle. Supports is a must, and I recommend some darker tone of plastic as it's there to shield the light...
I wouldn't recommend PLA or other more temperature sensitive materials as it's to be used in a car, and near a heat source in form of the light bulb." https://3dcarparts.org/library/2007/Ford/Focus/number-plate-light-shield https://r2-upload.3dcarparts.workers.dev/file/parts/81f84d1e-cba8-44a9-a097-9c804a2b6114/images/number-plate-light-shield-1_1776621529370_7lkzfr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2007/Ford/Focus/number-plate-light-shield?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-21b2c38f-1e39-4c4b-8854-74f1467d9200 2004 Ford Focus Air Vent Trim FORD FOCUS MK2 AIR VENT TRIM NO LEGS https://3dcarparts.org/library/2004/Ford/Focus/air-vent-trim https://r2-upload.3dcarparts.workers.dev/file/parts/21b2c38f-1e39-4c4b-8854-74f1467d9200/images/air-vent-trim-1_1776621528667_niumqo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/air-vent-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-71b87514-31a7-4fc7-a74a-532ccfb93644 2003 Ford Focus ST Symposer Delete Bung "This is a simple symposer delete bung for the Ford Focus ST MK2. I printed in nylon for strength but ABS would be good also. A decent infill will be required as it needs to be tightly clamped in so I have suggested 90%. Feel free to play around with the settings depending on your chosen material. 0.2 resolution should suffice but you could get away with 0.3mm, just watch for the ribs.
This video explains the symposer delete process (not my video) -----> https://www.youtube.com/watch?v=LD1ffLSoajk
As a disclaimer this bung works perfectly when printed correctly and I run it in my own car daily. I cannot be held responsible for any damage caused to your vehicle as a result of fitting this or indeed removing your symposer. This modification like any other is done at your own risk." https://3dcarparts.org/library/2003/Ford/Focus%20ST/symposer-delete-bung https://r2-upload.3dcarparts.workers.dev/file/parts/71b87514-31a7-4fc7-a74a-532ccfb93644/images/symposer-delete-bung-1_1776621529117_2tfejl.jpg in_stock 15.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2003/Ford/Focus%20ST/symposer-delete-bung?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7cb943b8-303a-4d5c-9b87-93dc442ef6c0 1999 Ford Focus Headlight Dust Cover Replacement for the headlight dust cover on a Ford Focus mk1 1999 https://3dcarparts.org/library/1999/Ford/Focus/headlight-dust-cover https://r2-upload.3dcarparts.workers.dev/file/parts/7cb943b8-303a-4d5c-9b87-93dc442ef6c0/images/headlight-dust-cover-1_1776621528099_a4r12s.jpg in_stock 19.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1999/Ford/Focus/headlight-dust-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-fba10c18-4efe-4cd1-8b1d-f51d69cddf71 2011 Ford Focus Rear Windshield Wiper Cover "Converted from Compas3d file format to .stl, that was a journey to go through!
Also it is called 30784289 as VOLVO part.
And bm5z17c526a as a Ford Focus 3 part, if you need to buy one." https://3dcarparts.org/library/2011/Ford/Focus/rear-windshield-wiper-cover https://r2-upload.3dcarparts.workers.dev/file/parts/fba10c18-4efe-4cd1-8b1d-f51d69cddf71/images/rear-windshield-wiper-cover-1_1776621528574_k52zaw.jpg in_stock 9.15 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2011/Ford/Focus/rear-windshield-wiper-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-82d11e10-2cc8-43ba-9721-bc25f07b0915 2004 Ford Focus Hood Unlock Lever This is a part of the hood unlock of a Ford focus II https://3dcarparts.org/library/2004/Ford/Focus/hood-unlock-lever https://r2-upload.3dcarparts.workers.dev/file/parts/82d11e10-2cc8-43ba-9721-bc25f07b0915/images/hood-unlock-lever-1_1776621526837_dzoug4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Ford/Focus/hood-unlock-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-65c54a1d-49f8-4277-a1d9-3f497e9763ff 2002 Buick Regal Seat Tilt Gear Seat gear for tilt, made for Buick but may fit other models/years. https://3dcarparts.org/library/2002/Buick/Regal/seat-tilt-gear https://r2-upload.3dcarparts.workers.dev/file/parts/65c54a1d-49f8-4277-a1d9-3f497e9763ff/images/e8aa660d-9a3f-4c3e-b02e-ef914459065a_1775356075244_8lu6a4.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Buick/Regal/seat-tilt-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e66b62c7-8cbd-44a6-bdbc-cec8ee9f72f6 2002 Mini Cooper Grocery Bag Hook This hook holds onto the handles of shopping bags to keep them from sliding around on the floor of a MINI Cooper. It snaps onto the wire frame of the Cup Holder accessory that was commonly supplied on MINI Coopers from 2002 to 2007. https://3dcarparts.org/library/2002/Mini/Cooper/grocery-bag-hook https://r2-upload.3dcarparts.workers.dev/file/parts/e66b62c7-8cbd-44a6-bdbc-cec8ee9f72f6/images/grocery-bag-hook-1_1777605885323_wypzc6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Mini/Cooper/grocery-bag-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-98f5646c-f943-436a-b0a4-77b688a67bf0 1990 Ford Mustang Console Trim Plug This is the oval shaped plug that fits into the sides of the center console at the rear on 1987-1993 Mustangs. I have an '88 in which it fit great. Just a bit tight to keep it from falling out. A little paint to match the color of the console and you're good to go. https://3dcarparts.org/library/1990/Ford/Mustang/console-trim-plug https://r2-upload.3dcarparts.workers.dev/file/parts/98f5646c-f943-436a-b0a4-77b688a67bf0/images/e9cf79ccf078ec8272ce1dac25fff684_1773599364676_vwp5mm.png in_stock 11.79 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Ford/Mustang/console-trim-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e2f3042c-f55b-448a-94be-c38282bdf840 2005 Ford Mustang Cup Holder Insert "Based on the OEM Cup holder insert. Large 40mm Tall By 65mm Dia cup to hide anything. Easy access but secure location.
Video oh how it works
http://youtu.be/8p9r7u_sXjg" https://3dcarparts.org/library/2005/Ford/Mustang/cup-holder-insert https://r2-upload.3dcarparts.workers.dev/file/parts/e2f3042c-f55b-448a-94be-c38282bdf840/images/Ford_Musatang_Cup_Holder_insert_hollow_1_1773599633438_x5lnpr.jpg in_stock 15.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/cup-holder-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e62db72f-ca90-4dff-9128-0bd7f689c484 2002 Ford Mustang A/C Knob 01-04 Ford Mustang A/C Knob https://3dcarparts.org/library/2002/Ford/Mustang/ac-knob https://r2-upload.3dcarparts.workers.dev/file/parts/e62db72f-ca90-4dff-9128-0bd7f689c484/images/99-04_Mustang_Heating_Knob_4_1773599677831_zc0b5v.PNG in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Ford/Mustang/ac-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-11b21547-0b60-4a0a-85f3-0527d39b32cf 1984 Ford Mustang Wheel Center Cap and Seat Handles "Replacement center wheel caps for mid-eighties Saleen Mustang created for a dealership in the process of restoring a fox body. The car was missing all but one center cap on the stock wheels, and after reaching out to Saleen and Ford with no luck, they decided on 3D printed replacements.
Having one remaining wheel cap able to get the measurements from, I modeled a near exact replacement only changing the clip-in part and interior. Printed in ABS to withstand the elements. I also made replacement seat lever handles for the car.
*The photo of the Mustang with the blue stripes is not the one I help with but has the same wheels.
EDIT: I've included a shorter version of the wheel hub for the ARE 5 spoke wheels used on same era Saleen Mustang." https://3dcarparts.org/library/1984/Ford/Mustang/wheel-center-cap-and-seat-handles https://r2-upload.3dcarparts.workers.dev/file/parts/11b21547-0b60-4a0a-85f3-0527d39b32cf/images/Car_WheelHub1_1773599728655_npdyii.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Ford/Mustang/wheel-center-cap-and-seat-handles?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3731584a-9172-4999-9de8-68a6c1f94917 2021 Ford Mustang Mach-E Anti Dent Clip "The Ford mustang mach-e charger cover flap has a crytical flaw. While the car is charging tha flap is open and someone could collide with it cousing the flap to make a dent in the car.
This clip limits the opening size and helps reducing the chance of a dent in your car.
Printing: I prited this clip with a 0.3mm layer height. No support is needed.
Placing the clip:
Open the charger flap fully. insert the hook side of the clip (smallest side of the print) in the small opening marked with A in the provided images. then gently close the flap, but not fully close it. this will leave enough room to wiggle the clip upwards and to slide the thick part of the clip in the clamp of the flap." https://3dcarparts.org/library/2021/Ford/Mustang%20Mach-E/anti-dent-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3731584a-9172-4999-9de8-68a6c1f94917/images/Info_1773599821098_w28gr2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2021/Ford/Mustang%20Mach-E/anti-dent-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b02282fe-6f6e-49fd-ad5e-e34efb06fd75 2005 Ford Mustang Trunk Floor Mat Support "Add to the spare tire screw to fix the trunk floor mat from buckling
https://youtu.be/82kgYPdNj50" https://3dcarparts.org/library/2005/Ford/Mustang/trunk-floor-mat-support https://r2-upload.3dcarparts.workers.dev/file/parts/b02282fe-6f6e-49fd-ad5e-e34efb06fd75/images/2005_ford_mustang_trunk_floor_mat_support_1773599936336_t9e1tx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Mustang/trunk-floor-mat-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5dc27bc3-d19f-48ba-8f42-c8a2b16dde61 2004 Ford Mustang Seat Lever "This is a replacement for the lever on the back of a 2004 Ford Mustang GT seat to fold it forward. It's not perfect, but it works and feels good.
Not real sure the best print settings. I'd say at the most, a .2 resolution and the higher the fill level the better." https://3dcarparts.org/library/2004/Ford/Mustang/seat-lever https://r2-upload.3dcarparts.workers.dev/file/parts/5dc27bc3-d19f-48ba-8f42-c8a2b16dde61/images/Seat_Lever_1_1773600007558_xk0y81.png in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Mustang/seat-lever?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8b635a46-a030-4b25-b602-b1234ec4a733 2007 Mini Cooper Fender Access Cap "Inner fender access cap for 07-15 MINI cooper.
Replica of OEM part. -reinforced tabs" https://3dcarparts.org/library/2007/Mini/Cooper/fender-access-cap https://r2-upload.3dcarparts.workers.dev/file/parts/8b635a46-a030-4b25-b602-b1234ec4a733/images/fender-access-cap-1_1772950072323_x8i2x0.jpg in_stock 21.23 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Mini/Cooper/fender-access-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b3fb7eb1-b13d-485d-a727-8aee4f143707 2006 Mini R56 Tachometer Mount "#### Update @ 20170623
The new model has better stability by increasing thickness of the mount. =)
#### Summary
It is the car mount for Mini Cooper R56 which can be installed at the back of tachometer.
####
Config
Ball Radius: 9.2mm
#### My Story
For me, I feel it is quite difficult to setup my GPS navigation in my R56 with normal suction cup mount. It is not stable and it may block my view. That's why I design this mount. =)" https://3dcarparts.org/library/2006/Mini/R56/tachometer-mount https://r2-upload.3dcarparts.workers.dev/file/parts/b3fb7eb1-b13d-485d-a727-8aee4f143707/images/tachometer-mount-1_1777605812632_3w308s.jpg in_stock 17.22 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2006/Mini/R56/tachometer-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d78b22b3-dfc9-4243-b63e-4327a5a09794 2008 Ford Focus Headlight Washer Cover Left + Right part. https://3dcarparts.org/library/2008/Ford/Focus/headlight-washer-cover https://r2-upload.3dcarparts.workers.dev/file/parts/d78b22b3-dfc9-4243-b63e-4327a5a09794/images/headlight-washer-cover-1_1772507862609_aadydi.jpg in_stock 7.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Ford/Focus/headlight-washer-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b6044232-bc81-49c4-a6d0-725150dbf6d1 1998 Ford Focus Bumper Clip "This is a plastic expansion nut that goes between the plastic outer sill / skirt and the metal body part of a Ford Focus MK1.
Dimensions: Expansion part: 8mm x 8mm, 10mm height
Main washer: 20mm diameter, 3mm height
Mini washer: 9mm diameter, 3mm height
Screw hole: 3.8mm diameter
Included is also the .STL for a rotated version, which should have better strength and does not need supports." https://3dcarparts.org/library/1998/Ford/Focus/bumper-clip https://r2-upload.3dcarparts.workers.dev/file/parts/b6044232-bc81-49c4-a6d0-725150dbf6d1/images/bumper-clip-1_1772507781066_elh5yf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Ford/Focus/bumper-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c18dbf7f-3f98-4d2c-a4a4-f3757e345a2e 2018 Ford Focus Cup Coin Box A small coin box fit in cup holder for Ford Focus MK4. https://3dcarparts.org/library/2018/Ford/Focus/cup-coin-box https://r2-upload.3dcarparts.workers.dev/file/parts/c18dbf7f-3f98-4d2c-a4a4-f3757e345a2e/images/cup-coin-box-1_1772507536604_jo7flh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Ford/Focus/cup-coin-box?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ef28d439-22a2-4a6d-ab75-55f23dbf841e 2005 Ford Focus Top Storage Latch "Ford Focus MK2 Top storage latch repair part
I glued it with 2 component exoxy." https://3dcarparts.org/library/2005/Ford/Focus/top-storage-latch https://r2-upload.3dcarparts.workers.dev/file/parts/ef28d439-22a2-4a6d-ab75-55f23dbf841e/images/top-storage-latch-1_1772507519277_9s2mdd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Ford/Focus/top-storage-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2bd1b792-9b89-41f3-870d-7166664ad3c7 2012 Ford Focus Windshield Washer Bottle Cap A basic cap for the windshield washer bottle on my Mk3 Ford Focus (ST). I would imagine it would work on other Ford products as well that have a bottle opening of around 51mm. PETG could probably work ok but I had some TPE I wanted to try. https://3dcarparts.org/library/2012/Ford/Focus/windshield-washer-bottle-cap https://r2-upload.3dcarparts.workers.dev/file/parts/2bd1b792-9b89-41f3-870d-7166664ad3c7/images/windshield-washer-bottle-cap-1_1772507410287_9frfrn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2012/Ford/Focus/windshield-washer-bottle-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a30108bc-7045-4c2e-86ea-2afaf05e6c83 2012 Ford Focus Wheel Center Cap "Center cap for Ford Focus ST 19"" wheels. Better looking (and cheaper!) than stock cap. CAD included for customization." https://3dcarparts.org/library/2012/Ford/Focus/wheel-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/a30108bc-7045-4c2e-86ea-2afaf05e6c83/images/wheel-center-cap-1_1772507378969_a92gs3.jpg in_stock 8.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Ford/Focus/wheel-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d310c35d-bd87-4617-b5f0-1177e5584893 2006 Ford Focus Roof Rack Slot Cover Ford Focus MK2 Roof Rack slot covers https://3dcarparts.org/library/2006/Ford/Focus/roof-rack-slot-cover https://r2-upload.3dcarparts.workers.dev/file/parts/d310c35d-bd87-4617-b5f0-1177e5584893/images/roof-rack-slot-cover-1_1772507119029_gsfytj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Ford/Focus/roof-rack-slot-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-191caa03-45a1-483e-8d9f-067ff87421cf 2012 Ford Focus Windshield Washer Fluid Reservoir Cap "I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG.
This cap may fit newer ford(s) vehicles.
Update 02/23/22:
Added a jacket to fit around the outside of the wiper tube along with fitting inside, this will prevent the part from spinning.
Feedback from the community, I adjusted the tolerances for the base to fit inside the wiper base.
Update 02/25/22:
Update the “FordFocus2012_WindshieldWiper_v3_Base_Revised_v1.stl” Increase thread tolerances for certain printers.
Update 03/01/22:
Fixed thread alignment, simulation was set up incorrectly. Logos will align with the notch on the base. See attached photo.
Updated files:
FordFocus2012_WindshieldWiper_v3_Cap_Revised_v2.stl
FordFocus2012_WindshieldWiper_v3_Ford_ST_Logo_Cap_Revised_v2.stl
Note: Best to install when the car is warm." https://3dcarparts.org/library/2012/Ford/Focus/windshield-washer-fluid-reservoir-cap-2 https://r2-upload.3dcarparts.workers.dev/file/parts/191caa03-45a1-483e-8d9f-067ff87421cf/images/windshield-washer-fluid-reservoir-cap-1_1777605798198_q9027j.jpg in_stock 17.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2012/Ford/Focus/windshield-washer-fluid-reservoir-cap-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-328f7c98-ca57-4479-aa98-b2fa5479a971 2003 Ford Focus Washer Fluid Reservoir Cap "A ""Wischwasserbehälterspritzkappe"" (dont you love the german language? :) ) replacement
-part of the broken cap for the wiping-water-tank-cap of our Ford Focus Cmax.
V3 - fits and snaps shut!
USE PETG! PLA wont last!
update after a very hot summer of 2019. The PETG-PArt still hold up, but the thinner part is bent a little and the cap doesnt snap shut anymore, but still stays in place. Not perfect - but allright for my needs." https://3dcarparts.org/library/2003/Ford/Focus/washer-fluid-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/328f7c98-ca57-4479-aa98-b2fa5479a971/images/washer-fluid-reservoir-cap-1_1772506616150_7rp9nm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Ford/Focus/washer-fluid-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c10e8923-0541-4c80-832c-bc9eb9bf0a82 2000 Ford Focus Front Door Guard "The door guards on ford focus are great, but once you loose them or they broke, they are quite expensive.
so i designed my own for printing.
After some trial and error they come out nice.
For the right door, just flip it in slicer.
I printed mine in PETG. They should handle 70C. So it should be fine on summer sun.
I think Nylon would be better, but for no i don't have it." https://3dcarparts.org/library/2000/Ford/Focus/front-door-guard https://r2-upload.3dcarparts.workers.dev/file/parts/c10e8923-0541-4c80-832c-bc9eb9bf0a82/images/front-door-guard-1_1772506517485_67f4mx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Ford/Focus/front-door-guard?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b139409a-bbef-4e8d-8699-8174c7bae225 2004 Ford Focus Center Console Storage Organizer "Infill for FORD FOCUS MK2 CENTER CONSOLE STORAGE
There is two models. First is full block - so use boolean to modified it for your needs. The second one is my example how I use it like a socket holder
there is a small gap between so I used 3mm floor XPS (or mirelon or some rubber) to fill it and the 3d printed part is firmly inserted.
Attention !!!
Inside the car, is dangerous of high temperatures, therefore use only filaments with high heat resistance. PLA or PETG has softened and deformed. I have used HIPS now and so far it is good" https://3dcarparts.org/library/2004/Ford/Focus/center-console-storage-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/b139409a-bbef-4e8d-8699-8174c7bae225/images/center-console-storage-organizer-1_1777605876841_rkc71r.jpg in_stock 29.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/center-console-storage-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-22aa9d64-c30d-4ecb-addc-197db520cd7d 1998 Ford Focus Hose Clip (15.5mm) "Remix of ""Dual scalable cylindrical mounting clip"" to remplace a ford focus MK1 broken clip." https://3dcarparts.org/library/1998/Ford/Focus/hose-clip-155mm https://r2-upload.3dcarparts.workers.dev/file/parts/22aa9d64-c30d-4ecb-addc-197db520cd7d/images/hose-clip-155mm-1_1772506171184_yu4xns.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Ford/Focus/hose-clip-155mm?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-228fc845-0bc3-4a2e-9a9c-cd31efa2b1b0 1998 Ford Focus Sun Visor Support "Sun Visor Support for Ford Focus Mk1.
As a general rule, due to the heat, the fastening of the Sun Visor of this model suffers expansion, and over time it loses its fastening of the Sun Visor, so it is constantly loose.
This small bracket fits perfectly and provides a grip that allows mobility better than if it were new." https://3dcarparts.org/library/1998/Ford/Focus/sun-visor-support https://r2-upload.3dcarparts.workers.dev/file/parts/228fc845-0bc3-4a2e-9a9c-cd31efa2b1b0/images/sun-visor-support-1_1777605840413_jtbqu1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Ford/Focus/sun-visor-support?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-df806dcc-c599-427c-853d-37cb284d2f6f 2013 Ford Focus Mudflaps Mudflaps For 2013-2018 MK3 Ford Focus S/SE/ST/RS. Will add the holes when I get the chance, but the overall size is correct for these cars. https://3dcarparts.org/library/2013/Ford/Focus/mudflaps https://r2-upload.3dcarparts.workers.dev/file/parts/df806dcc-c599-427c-853d-37cb284d2f6f/images/mudflaps-1_1772505855494_i2a3e6.jpg in_stock 29.27 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Ford/Focus/mudflaps?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-61ca5401-f577-449c-8a17-80246da13621 2012 Ford Focus Rear Cargo Cover Hinge Bracket "This is a simple hinge for the parcel shelf for a 2012 Ford Focus (MK3) or Ford Fiesta. The original bracket often brakes, so did mine. The cardboard-like material was so damaged, that i had to make a completely other way of connecting the hinge and the parcel shelf.
This bracket is fixed with four (two for each side) plastiv rivets (bumper fastener/fender clips/etc..) for 6mm holes. I used the push pin version but others should also work. If you dont have any, ask your local car mechanic shop for them. If you dont mind the look, you can also use screws.
Place the printed hinge in the middle of the cut-out and as far to the side as possible. Then drill directly the 6mm holes through the parcel shelf and fix the printed part with the clips." https://3dcarparts.org/library/2012/Ford/Focus/rear-cargo-cover-hinge-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/61ca5401-f577-449c-8a17-80246da13621/images/rear-cargo-cover-hinge-bracket-1_1772504872260_hmk3wf.jpg in_stock 12.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/rear-cargo-cover-hinge-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-84f61189-8438-45fc-aa77-c04d3f3c32c9 2015 Ford Focus Brake Fluid Funnel "This is a funnel I created for topping off the brake fluid level for my '15 Ford Focus. Like many cars made now, the brake fluid reservoir is actually recessed under a cowl. I wanted a simple way of topping off the brake fluid level while minimizing the chance of a spill.
The hook can be attached to the rubber gasket on the cowl (doesn't pull much at all) and the lower hole placed inside the reservoir." https://3dcarparts.org/library/2015/Ford/Focus/brake-fluid-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/84f61189-8438-45fc-aa77-c04d3f3c32c9/images/brake-fluid-funnel-1_1777605791328_ikk02v.jpg in_stock 18.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2015/Ford/Focus/brake-fluid-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0056367d-13ed-4e9d-9fe6-21964bea869d 2004 Ford Focus Fuse Box Cover Clip "This is a clip used to keep the upholstery up that covers the fusebox on the passengerside of a Ford Focus mk2.
I'ts a tricky (seemingly impossible) peace to print. I couldn't get cura to make decent, removable supports without breaking the print. But even with most of the supports still in it seems to do it's job." https://3dcarparts.org/library/2004/Ford/Focus/fuse-box-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/0056367d-13ed-4e9d-9fe6-21964bea869d/images/fuse-box-cover-clip-1_1772429563184_iei0yf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2004/Ford/Focus/fuse-box-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5c7f2b84-3293-4d95-aa3f-52843be082d6 2015 Ford Focus Armrest Compartment Shelf with Pen Holder "The flexible center console shelf on my '15 Ford Focus was just too shallow and I also liked to keep a pen easily accessible. I created a deeper shelf that could replace the factory one and also placed a shaft in one corner to keep a pen in but one that wouldn't lie flat and take up too much space.
I kept them modular so of one piece broke then only that one element would need to be reprinted. It also made printing without any supports or odd angles much easier. The base of the pen shaft is pretty tight and a press fit should do but I super glued it as well since I originally printed in PLA and I'm thinking it might not hold up to summer heats (might need to go with PETG).
Update: Added v7 of the Center Console pen shaft to replace the v5 pen shaft and base stls. This is not open at the bottom and should be able to print without supports." https://3dcarparts.org/library/2015/Ford/Focus/armrest-compartment-shelf-with-pen-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5c7f2b84-3293-4d95-aa3f-52843be082d6/images/armrest-compartment-shelf-with-pen-holder-1_1777605891999_cenja3.jpg in_stock 19.42 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Ford/Focus/armrest-compartment-shelf-with-pen-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f2d9950-86b1-4755-8367-0bd1338c5c72 2016 Ford Focus Windshield Washer Fluid Cap "Made from TPU to replace the broken cap on my 2016 Ford Focus. should fit other models. filler neck is 2.1"" at the bed and 2"" at the bottom." https://3dcarparts.org/library/2016/Ford/Focus/windshield-washer-fluid-cap https://r2-upload.3dcarparts.workers.dev/file/parts/8f2d9950-86b1-4755-8367-0bd1338c5c72/images/windshield-washer-fluid-cap-1_1772429250322_9zw3q9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2016/Ford/Focus/windshield-washer-fluid-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f39ee07a-2f8b-47ca-86ff-cc3aac47a1c9 2015 Ford Focus Cargo Cover Clip This clip holds the support string that lifts the cargo cover on a 2015 Ford Focus Hatchback. I would imagine it works on similar years too. https://3dcarparts.org/library/2015/Ford/Focus/cargo-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f39ee07a-2f8b-47ca-86ff-cc3aac47a1c9/images/cargo-cover-clip-1_1777605789417_i029cz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Ford/Focus/cargo-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-97beaaca-7611-4351-a989-2bcf19b0dad2 2012 Ford Focus Center Console Organizer "This is an organizer for inside the center console of a Ford Focus. It was designed for a 2012 year model but a few other years have center consoles with the same or similar enough dimensions for it to fit.
If you try it in your car and it fits, let me know and I'll add the year and model to a list here.
The dwg is included as well so that it can be broken up into multiple parts, if needed." https://3dcarparts.org/library/2012/Ford/Focus/center-console-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/97beaaca-7611-4351-a989-2bcf19b0dad2/images/center-console-organizer-1_1772426572710_ump5du.jpg in_stock 18.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Ford/Focus/center-console-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-74b2adee-8077-4800-ba06-41776b0f8bb4 2008 Ford Focus Fog Light Ring "to replace the chrome rings around the fog lights on a ford focus mk2 facelift (2008-2010) model
first one is the same size as the chrome ring.
the second lower one is just that, more of a low profile ring" https://3dcarparts.org/library/2008/Ford/Focus/fog-light-ring https://r2-upload.3dcarparts.workers.dev/file/parts/74b2adee-8077-4800-ba06-41776b0f8bb4/images/fog-light-ring-1_1772426407561_5eoy2s.jpg in_stock 8.39 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2008/Ford/Focus/fog-light-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-31f6d4e4-eead-4ee5-a484-1217b1da7092 2016 Chevrolet Corvette Behind the Screen Shelf This is the shelf that will fit in behind the screen of a C7 Corvette. 2014-2019 Stingray, Grand Sport, Z06 or ZR1. It just helps to organize the space a bit better. https://3dcarparts.org/library/2016/Chevrolet/Corvette/behind-the-screen-shelf https://r2-upload.3dcarparts.workers.dev/file/parts/31f6d4e4-eead-4ee5-a484-1217b1da7092/images/behind-the-screen-shelf-1_1777605786820_scfmol.jpg in_stock 24.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Chevrolet/Corvette/behind-the-screen-shelf?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-26bde3e8-d2b5-4047-ad23-f5945bb66c20 2014 Chevrolet Corvette Cup Holder Divider "I found the cupholder divider in my C7 Corvette to be awful. It didn't stay in place and made it practically useless for holding a drink.
Because of this, I went down a path of designing a better divider that worked with zero modifications to the car. Just pop the old one out, toss it in the trash, and clip the new one in.
I wound up designing an additional version as well that has one side sized appropriately to hold a can, while the other is the stock size and better for a tumbler or to go cup.
Unfortunately, I have no photos around from when I originally printed mine. It became a bit longer of a testing period than I originally intended." https://3dcarparts.org/library/2014/Chevrolet/Corvette/cup-holder-divider https://r2-upload.3dcarparts.workers.dev/file/parts/26bde3e8-d2b5-4047-ad23-f5945bb66c20/images/cup-holder-divider-1_1772426235892_fy8y03.jpg in_stock 18.71 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Chevrolet/Corvette/cup-holder-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e0ee026f-54b2-4995-85e3-de3cf78a9036 2005 Chevrolet Corvette Carpet Clip Carpet mat for your chevy still in decent shape but the round snap that holds it in place is kaput? Print this simple replacement to keep that mat in service! https://3dcarparts.org/library/2005/Chevrolet/Corvette/carpet-clip https://r2-upload.3dcarparts.workers.dev/file/parts/e0ee026f-54b2-4995-85e3-de3cf78a9036/images/carpet-clip-1_1777605783302_wax4dk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Chevrolet/Corvette/carpet-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e788207c-1e32-4952-b539-504050d80f55 2009 Chevrolet Corvette Console Lid Latch This is a model of the latch for the console lid of a C6 generation Corvette (2005-2013). It is very close to the original dimensions. This should work in place of the factory latch. https://3dcarparts.org/library/2009/Chevrolet/Corvette/console-lid-latch https://r2-upload.3dcarparts.workers.dev/file/parts/e788207c-1e32-4952-b539-504050d80f55/images/console-lid-latch-1_1777605772733_xaq6o8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Chevrolet/Corvette/console-lid-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b436afba-61af-48a0-a5e5-9eb3931fb449 2005 Chevrolet Corvette Mirror Radar Mount "This is a radar mount that claws to mirror of Corvette C6.
Needs to be printed ABS for heat resistance PETG may also work.
Screws will be needed to mount the bracket to the mount and Valentine One mount to the bracket." https://3dcarparts.org/library/2005/Chevrolet/Corvette/mirror-radar-mount https://r2-upload.3dcarparts.workers.dev/file/parts/b436afba-61af-48a0-a5e5-9eb3931fb449/images/mirror-radar-mount-6_1772425200370_50ksz2.jpg in_stock 15.71 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2005/Chevrolet/Corvette/mirror-radar-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-19dc571b-e336-465d-bbba-dda5b96d6036 2004 Ford Focus Interior Panel Clip "Interior clip for the Ford Focus. A little different to the original, but this way it has more strength.
Like it, want to donate? :
BTC: 35mP4ZPtXDJryiCciSdpvndpe83L2xGsPp
ETH: 0x758b49e7fB1AeCB49e7d879E3C6d88b4eC2Ccedd" https://3dcarparts.org/library/2004/Ford/Focus/interior-panel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/19dc571b-e336-465d-bbba-dda5b96d6036/images/interior-panel-clip-1_1772420720302_bipwn2.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Ford/Focus/interior-panel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3178a093-d5db-4d4f-b8ed-b6c60aa09c05 2011 Ford Focus Oil Filter Removal Adapter "This is an adapter to remove the oil filter on a Ford Focus ST (I believe it would be considered a 74mm canister with 14 flat sides). Like many vehicles the oil filter is oriented to such that when you unscrew it oil flows down the side, making a mess. I created this to be able to unscrew it and allow the oil to be diverted out a spout at the bottom (which is also a 1/2 inch ratchet port).
I've not changed my oil with it yet but have verified it fits the filter and doesn't come into contact with anything when attached.
It's based on thehairs oil filter removal tool but that wouldn't fit my oil filter so I created this one." https://3dcarparts.org/library/2011/Ford/Focus/oil-filter-removal-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/3178a093-d5db-4d4f-b8ed-b6c60aa09c05/images/oil-filter-removal-adapter-3_1772420681445_qzqe3n.jpg in_stock 26.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2011/Ford/Focus/oil-filter-removal-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-de6efc11-a542-434e-afaf-e81ab9501cac 2012 Ford Focus Windshield Washer Fluid Reservoir Cap "I have a Ford Focus 2012 (Hatchback) and after 5 years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG.
This cap may fit newer ford(s) vehicles.
Update 07/01/2020:
Newer Model here
https://www.thingiverse.com/thing:4515206" https://3dcarparts.org/library/2012/Ford/Focus/windshield-washer-fluid-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/de6efc11-a542-434e-afaf-e81ab9501cac/images/windshield-washer-fluid-reservoir-cap-1_1772420451507_3wfsck.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/2012/Ford/Focus/windshield-washer-fluid-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-435be570-5a0d-4ec5-855f-578b3b88e37a 2002 Ford Focus Visor Retainer I designed this for my 2002 Ford Focus as the OEM retainer had split rendering it useless. The way this part fits on the visor can be greatly affected by the way your printer prints, but this can be adjusted by scaling the .STL up or down just a little bit. If scaled, this will change the size and location of the locator pins, but they can simply be snapped off and be good to go. I printed it with the locator pins pointing into the bed and used support. https://3dcarparts.org/library/2002/Ford/Focus/visor-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/435be570-5a0d-4ec5-855f-578b3b88e37a/images/visor-retainer-1_1772341994566_xbkfie.jpg in_stock 8.31 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Ford/Focus/visor-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-edba474f-10d4-49fe-a454-709a3d85f44c 2016 Chevrolet Corvette Behind-Screen Drawers and Shelf "This drawers and shelf organizer is shaped to fit in the behind-screen storage area of a C7 Corvette.
I used ABS and a 0.4 MM nozzle. PLA not recommended due to heat cycles/warping. The main organizer body can be printed without support if turned face down.
Remixes of different types of drawers encouraged!
9-29-25: Added drawer with pull for better grip." https://3dcarparts.org/library/2016/Chevrolet/Corvette/behind-screen-drawers-and-shelf https://r2-upload.3dcarparts.workers.dev/file/parts/edba474f-10d4-49fe-a454-709a3d85f44c/images/behind-screen-drawers-and-shelf-1_1777605776636_9g2314.jpg in_stock 18.59 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2016/Chevrolet/Corvette/behind-screen-drawers-and-shelf?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-547dc823-ed1c-427a-89b1-c6fcd8fb9c84 2009 Chevrolet Corvette Radio Blockoff Plate A cover/plate for a factory C6 Corvette (2005-2013) to cover the gap if you remove your factory radio. I made the face flat, so that you could easily put a plate or sticker on it (as its typically used in race cars. https://3dcarparts.org/library/2009/Chevrolet/Corvette/radio-blockoff-plate https://r2-upload.3dcarparts.workers.dev/file/parts/547dc823-ed1c-427a-89b1-c6fcd8fb9c84/images/radio-blockoff-plate-1_1771474346969_dx9u1r.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Chevrolet/Corvette/radio-blockoff-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-647fc30a-31e2-4fea-b984-3c8ff332a594 2008 Chevrolet Corvette Door Filler Piece "This is the filler piece that covers the screws, under the door panel pull handle. It is ""no longer available"" from GM and can only be sourced via salvage sellers at crazy prices. Print it on top of blue painters tape for added texture to somewhat match the OEM door panel. Remember to raise the Z axis datum point if you print on top of blue painters tape. I have a Creality Ender 3V2 and a Z axis increase of 1.05 worked perfectly. Enjoy." https://3dcarparts.org/library/2008/Chevrolet/Corvette/door-filler-piece https://r2-upload.3dcarparts.workers.dev/file/parts/647fc30a-31e2-4fea-b984-3c8ff332a594/images/door-filler-piece-1_1771474284938_n7637b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Chevrolet/Corvette/door-filler-piece?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e1755871-8942-4642-b7e8-bf1972015ff5 1999 Honda S2000 Wheel Spats Front+Rears This is my look on the spats to keep mud and stones off the lower body panels https://3dcarparts.org/library/1999/Honda/S2000/1999-honda-s2000-wheel-spats-front-rears https://r2-upload.3dcarparts.workers.dev/file/parts/e1755871-8942-4642-b7e8-bf1972015ff5/images/0befbaec-6de0-42df-942e-1ce2967b8527_1770555947766_0xam3s.png in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1999/Honda/S2000/1999-honda-s2000-wheel-spats-front-rears?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3f7fab42-2322-4109-8dbb-e163cd550aff 2005 Porsche 911 Interior Door handle My look on the GT3 style interior door handle https://3dcarparts.org/library/2005/Porsche/911/2005-porsche-911-interior-door-handle https://r2-upload.3dcarparts.workers.dev/file/parts/3f7fab42-2322-4109-8dbb-e163cd550aff/images/WhatsApp_Image_2025-08-31_at_11_05_32_dd42d30d_1770555537212_6dkp9a.jpg in_stock 29.96 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Porsche/911/2005-porsche-911-interior-door-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-75355389-f3ae-4732-b463-b059b1f48e53 1993 Ford F150 Fog Light Switch Housing Housing/mount for the fog light https://3dcarparts.org/library/1993/Ford/F150/fog-light-switch-housing https://r2-upload.3dcarparts.workers.dev/file/parts/75355389-f3ae-4732-b463-b059b1f48e53/images/2026-02-02_13-21-32_1770067427607_4dry8o.jpg in_stock 11.28 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Ford/F150/fog-light-switch-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a79bbbee-5267-4e49-9972-d2717c4a4ba1 2005 Chevrolet Corvette Rear Hatch Lid Handle Pull Down & Drawer Pull Handle "A friend of mine broke the rear lid/trunk/hatch pull down on his C6 Corvette. He knows that I was an ME with an insatiable lust for re-engineering everything in my world. The original plate design that GM put in the model was terrible. I took to opportunity to redesign a conventional handle that picks up the original screw hole locations and uses the original screws. My friend loves it. It was printed with PLA but I would recommend ABS or PETG(+), if you can utilize these in your printer. I used the Cura Dynamic setting, used 50% tri-hex infill which produces a very strong part. The logo is embossed ~.5mm, and looks pretty good. Let me know if you have any questions, I can easily modify it for your customization needs. Thanks
Update 12/5/25. Added a standoff for those that want to use this handle as a drawer pull. (many requests for this)" https://3dcarparts.org/library/2005/Chevrolet/Corvette/rear-hatch-lid-handle-pull-down-drawer-pull-handle https://r2-upload.3dcarparts.workers.dev/file/parts/a79bbbee-5267-4e49-9972-d2717c4a4ba1/images/rear-hatch-lid-handle-pull-down-drawer-pull-handle-1_1769398371109_gk0hyt.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Chevrolet/Corvette/rear-hatch-lid-handle-pull-down-drawer-pull-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-58a31905-fa43-4666-b282-22e759087378 2004 Toyota Highlander Climate Control Knob "The climate control knob on my Toyota Highlander Hybrid snapped off recently. Taking a closer look, it had a very flimsy attachment point and the break shouldn't have been surprising. Another friend of ours had the same problem.
Toyota wanted a few hundred dollars to take apart the console and replace the broken part (with the same design flaw). I thought I could do better!
This part slips nicely between the knob and the attachment point, making everything work perfectly again." https://3dcarparts.org/library/2004/Toyota/Highlander/climate-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/58a31905-fa43-4666-b282-22e759087378/images/climate-control-knob-1_1769398275441_op4zir.jpg in_stock 11.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Toyota/Highlander/climate-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-511c09f7-fa64-431c-8a44-8ab6c6e6cb40 2008 Toyota Highlander Hood Arm Holder This is the plastic piece that holds the hood arm in place from wobbling around. This is for the Toyota Highlander 2008 model. Should fit all models from that year. https://3dcarparts.org/library/2008/Toyota/Highlander/hood-arm-holder https://r2-upload.3dcarparts.workers.dev/file/parts/511c09f7-fa64-431c-8a44-8ab6c6e6cb40/images/hood-arm-holder-1_1769398184601_fiwu1k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Toyota/Highlander/hood-arm-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1a437a23-d4b6-48ec-98d2-e596a196e8ea 2004 Toyota Highlander Cup Holder Basic cupholder I designed for a first gen highlander! The cup diameters are pretty wide and may want to remix one or two with smaller cup inserts or other florishes! Fits pretty well and the cover still closes when installed https://3dcarparts.org/library/2004/Toyota/Highlander/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/1a437a23-d4b6-48ec-98d2-e596a196e8ea/images/cup-holder-1_1769398098115_w6xci5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Toyota/Highlander/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-99e052b6-1c6d-4466-9139-1c2b41d35039 2013 Toyota Highlander USB Port for Empty Switch Port "A friend of mine wanted me to make this for his 2013 Toyota Highlander, so this should work for similar highlanders and models in general. Printed in two pieces to help lock the USB port into place. I tried to make it parametric but I'm not the greatest at that lol.
Printed on a Qidi X-Max 2" https://3dcarparts.org/library/2013/Toyota/Highlander/usb-port-for-empty-switch-port https://r2-upload.3dcarparts.workers.dev/file/parts/99e052b6-1c6d-4466-9139-1c2b41d35039/images/usb-port-for-empty-switch-port-1_1769397921929_a6d54t.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2013/Toyota/Highlander/usb-port-for-empty-switch-port?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e079d40d-c1c6-4e83-8067-c2efd01df252 2005 Toyota Highlander Cup Holder Divider A block to divide the center console cup holder on my 2005 Toyota Kluger (2005 Highlander in the USA) https://3dcarparts.org/library/2005/Toyota/Highlander/cup-holder-divider https://r2-upload.3dcarparts.workers.dev/file/parts/e079d40d-c1c6-4e83-8067-c2efd01df252/images/cup-holder-divider-1_1769397898663_47e2mq.jpg in_stock 22.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Toyota/Highlander/cup-holder-divider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-02f8ab45-ee26-412e-8957-4dd64e628dbd 2018 Toyota Highlander Liftgate Speaker Adapter This is an adapter that I had to make to get a 3 1/2 inch speaker into the Toyota Highlander 2018 liftgate because the current mount is for a 3 inch and a larger speaker will not fit. My final design needed a notch cut into it so that one of the clips for the tail light cover could go through it. I printed mine in PLA with 100% infill. It might have been overkill, but my early tests with 25% were not strong at all. https://3dcarparts.org/library/2018/Toyota/Highlander/liftgate-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/02f8ab45-ee26-412e-8957-4dd64e628dbd/images/liftgate-speaker-adapter-1_1769397876801_gx7xef.jpg in_stock 21.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Toyota/Highlander/liftgate-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8e97008-3c74-4942-903d-4e6bd1cf974e 2010 Toyota Highlander A/C Knob Insert All credit to the original author jamiekin - this was a great find! I had a really tight fit that made this sit proud of the knob by ~3mm, even pressing really hard. I made the radius of fillets in the sides slightly larger (3.6 to 4.0) and now it fits perfectly - printed on an Ender 3 Pro with PLA+. https://3dcarparts.org/library/2010/Toyota/Highlander/ac-knob-insert https://r2-upload.3dcarparts.workers.dev/file/parts/c8e97008-3c74-4942-903d-4e6bd1cf974e/images/ac-knob-insert-1_1769397863725_so5398.jpg in_stock 11.86 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Toyota/Highlander/ac-knob-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-090b6be9-b333-4c3f-bd36-e875a3159b2c 2017 Toyota Highlander Input Shaft Seal Driver "Uses the Toyota SST or a mallet as a driver. This is the seal behind the torque converter.
Based on seal 90311-51013
Tested on a 17ish Highlander." https://3dcarparts.org/library/2017/Toyota/Highlander/input-shaft-seal-driver https://r2-upload.3dcarparts.workers.dev/file/parts/090b6be9-b333-4c3f-bd36-e875a3159b2c/images/input-shaft-seal-driver-1_1769397818123_wnr31t.jpg in_stock 26.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2017/Toyota/Highlander/input-shaft-seal-driver?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-03085973-ab41-4699-8ada-896ece05dd59 2008 Toyota Highlander Sun Visor Clip Cylinder "This is a replacement for the cylinder on a car's sun visor that goes into the clip to hold the visor in place (let me know if you know the proper name for this part, I can't find it). This one in particular was designed for use in a 2008 Toyota Highlander, but also likely works for a variety of other vehicles as well.
The original STEP file is provided for any to modify as necessary for your needs." https://3dcarparts.org/library/2008/Toyota/Highlander/sun-visor-clip-cylinder https://r2-upload.3dcarparts.workers.dev/file/parts/03085973-ab41-4699-8ada-896ece05dd59/images/sun-visor-clip-cylinder-1_1769397785012_0agpyk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Toyota/Highlander/sun-visor-clip-cylinder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-959150f6-48e0-429f-bc12-b1e851ec2cdc 2013 Toyota Highlander Overhead Mic Housing "Designed and printed this for my 2013 Toyota Highlander Limited, in which I am installing a Kenwood aftermarket stereo. This print will make it so I can cleanly mount and install the Bluetooth mic into the overhead console, replacing the powered OEM mic that is incompatible with aftermarket head units.
This was the optimal alternative to rigging the OEM mic up to the new head (complicated, requires extra components, noisy mic audio while in motion), buying a drop-in replacement passive mic from a vendor I haven't heard of ($30, need to wait for shipping), or just mounting the new mic somewhere on my dash (visible, ugly and weird looking).
With this, I can just hot glue the mic into this housing and run the cable through the headliner and the pillar to the head unit, keeping it all completely hidden.
Will probably work for other ~2013 Toyota vehicles or other microphones.
Printed with PETG to withstand higher temperatures. No promises if PLA will hold up over time." https://3dcarparts.org/library/2013/Toyota/Highlander/overhead-mic-housing https://r2-upload.3dcarparts.workers.dev/file/parts/959150f6-48e0-429f-bc12-b1e851ec2cdc/images/overhead-mic-housing-1_1769397728112_oqttqc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Toyota/Highlander/overhead-mic-housing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3830cdd6-751d-4cd5-b6ff-55884fd16fba 2004 Chevrolet Corvette Air Duct Fender "Nice Air duct for the Corvette C5 97-04.
Print with support.
Use good quality double adhesive tape or sika kit to mount it in the duct outlet, use a heat gun to make the ABS or PLA bend the shape of the duct outlet.
Paint if necessary after printing in your favourite color.
If you put one on your own Corvette it would be nice to post a picture of it.
Update 12/2017 Used C5 Logo instead of C6 Logo.
Update 01/2018 Made the grid 1 mm thicker, right will follow.
Update 06/2018 Added duct without C5 logo
Thanks to : https://www.thingiverse.com/thing:2012101" https://3dcarparts.org/library/2004/Chevrolet/Corvette/air-duct-fender https://r2-upload.3dcarparts.workers.dev/file/parts/3830cdd6-751d-4cd5-b6ff-55884fd16fba/images/air-duct-fender-1_1777605905141_u2oy7y.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Chevrolet/Corvette/air-duct-fender?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-23f9d93f-122b-4cd5-a402-2002ea5be0ac 2004 Chevrolet Corvette Battery Vent Tube "Battery Vent Tube Replacement – 3D Printable Part
Broke your battery vent tube? This 3D printable replacement part is designed as a direct-fit alternative to the OEM elbow, perfect for vented lead-acid battery setups in vehicles, RVs, or power systems.
Features: Modeled to match the original for a snug, leak-free fit.
Ideal for routing battery gas vents safely outside the vehicle or enclosure.
Prints on its side for maximum strength and durability, with minimal support needed.
Print Details: Nozzle: 0.25mm
Layer
Height: 0.12mm
Material: PETG – chosen for its excellent chemical resistance and structural strength.
Prints clean and solid with great dimensional accuracy.
Fit is tight and secure — just like the original.
Shown here next to the broken OEM part from C6 Corvette Z06— this version fits perfectly and installs easily. A great save when replacements are hard to find or overpriced." https://3dcarparts.org/library/2004/Chevrolet/Corvette/battery-vent-tube https://r2-upload.3dcarparts.workers.dev/file/parts/23f9d93f-122b-4cd5-a402-2002ea5be0ac/images/battery-vent-tube-1_1777605919728_9tu5nu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Chevrolet/Corvette/battery-vent-tube?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-da80a9d5-f249-4120-aa45-8b5369cc5104 1971 Datsun 240Z Dome Light This is a redesigned Dome light for a 1971 Datsun 240z. It fits the same as the stock part but is designed to have 3 small led strips wired into it. I printed it in HIPS and used a small piece of acrylic as the lens. https://3dcarparts.org/library/1971/Datsun/240Z/dome-light https://r2-upload.3dcarparts.workers.dev/file/parts/da80a9d5-f249-4120-aa45-8b5369cc5104/images/dome-light-1_1769311993403_5x091k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1971/Datsun/240Z/dome-light?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f39cb160-6eb2-4e9b-b2d5-9b65f32f4d22 1998 Chevrolet Silverado Equalizer Knob There's a version with and a version without the ridges, depending on your printer. They friction fit, so you've got to press pretty hard to pop them in. https://3dcarparts.org/library/1998/Chevrolet/Silverado/equalizer-knob https://r2-upload.3dcarparts.workers.dev/file/parts/f39cb160-6eb2-4e9b-b2d5-9b65f32f4d22/images/equalizer-knob-1_1769311860115_7zrhc4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Chevrolet/Silverado/equalizer-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-de1f3cfe-6569-4e92-9594-0d86fd01a00e 1970 Nissan 240Z Door Window Trim Cap These are the end caps for the chrome window trim. https://3dcarparts.org/library/1970/Nissan/240Z/door-window-trim-cap https://r2-upload.3dcarparts.workers.dev/file/parts/de1f3cfe-6569-4e92-9594-0d86fd01a00e/images/door-window-trim-cap-1_1769311802654_lajkma.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1970/Nissan/240Z/door-window-trim-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-44a429a2-fc72-41b1-b382-8ae08264fe4d 1991 Nissan S13 Boot Release Cable Clip replacement part for the S13 silvia and 180sx boot release latch guide. its the bit with the plastic thread that always seems to break on these. this has been printed and tested to work on an s13. my print settings were very rough so some fettling was required (with a better printer and settings the part should fit spot on). i used support material from the same extruder so it was fairly well bonded. printed with nylon filament. https://3dcarparts.org/library/1991/Nissan/S13/boot-release-cable-clip https://r2-upload.3dcarparts.workers.dev/file/parts/44a429a2-fc72-41b1-b382-8ae08264fe4d/images/boot-release-cable-clip-1_1769311702594_m3hyla.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1991/Nissan/S13/boot-release-cable-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-37385724-e902-48a9-acc5-6f3fba93abd4 1986 Nissan S12 Vent Gauge Pod Gauge pod for drives side vents in a Nissan S12 LHD, use a 3x0.5x6mm screw to attach the lever. https://3dcarparts.org/library/1986/Nissan/S12/vent-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/37385724-e902-48a9-acc5-6f3fba93abd4/images/vent-gauge-pod-1_1769311610423_22jbs0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1986/Nissan/S12/vent-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6292d4c8-5dd0-4da1-a9ec-b04bc9ed19ea 1991 Nissan S13 Passenger Window Switch "Printed with 100% infill and on highest quality settings on M3D Micro
Used some sandpaper and buffing wheels on a dremel to get it nice and smooth.
The inner mounting box may need a little massaging with a dremel too.
UPDATE
The original broke on me so ive added more support around the switch mount point" https://3dcarparts.org/library/1991/Nissan/S13/passenger-window-switch https://r2-upload.3dcarparts.workers.dev/file/parts/6292d4c8-5dd0-4da1-a9ec-b04bc9ed19ea/images/passenger-window-switch-1_1769311485198_l9ym4m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1991/Nissan/S13/passenger-window-switch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c1e33cb8-7951-4f65-992b-be4c9a32fbe8 1987 Ford Mustang Heater Knob "this is a quick remix of the wonder design by @qkpony. All I did is remove the text.
if you would like one with custom text please let me know and I would happily do that for ya
Note: I did print this and it prints amazing, I did use ironing though that is not necessary.
I would also recommend blocking supports on the small part that connects to the heater control (the shaft thing), this is not 100% needed but its easier than the clean up needed afterward.
I did print this in both PETG and PLA+ but I would recommend PETG for obvious reasons pertaining to heat inside the vehicle" https://3dcarparts.org/library/1987/Ford/Mustang/heater-knob https://r2-upload.3dcarparts.workers.dev/file/parts/c1e33cb8-7951-4f65-992b-be4c9a32fbe8/images/heater-knob-1_1769311421852_jkncta.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Ford/Mustang/heater-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-da647276-7aa8-455f-8797-d35d85c5f28e 1987 Ford Mustang Sunroof Trim Retainer Clip Noticed the trim on my old foxbodys sunroof was hanging low, had a few clips broken or missing. I made this, it works and its stronger, enjoy! https://3dcarparts.org/library/1987/Ford/Mustang/1987-ford-mustang-sunroof-trim-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/da647276-7aa8-455f-8797-d35d85c5f28e/images/sunroof-trim-retainer-clip-1_1769311360654_j9knu9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Ford/Mustang/1987-ford-mustang-sunroof-trim-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d6446edd-a33f-420c-a551-5891afa46284 1986 Ford Mustang Cargo Cover Hook "Replacement hook designed to replace a broken or missing hook on your mustang's cargo cover. I tested this to work with my '86 mustang hatch and its a drop in replacement.
Very niche use case but I figured it would be useful to someone in the future." https://3dcarparts.org/library/1986/Ford/Mustang/cargo-cover-hook https://r2-upload.3dcarparts.workers.dev/file/parts/d6446edd-a33f-420c-a551-5891afa46284/images/cargo-cover-hook-1_1769311304629_1xzuft.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1986/Ford/Mustang/cargo-cover-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a233fd53-2044-4744-9887-3853dc142998 1989 Ford Mustang Interior Mirror Panels "Driver and passenger mirror covers.
Message me if you have any corrections, comments, or concerns.
Would probably recommend printing out of ABS due to the durability of ABS in regards to cars, and interior heats when sitting in the sun. PLA won't last very long if your car isn't garage kept." https://3dcarparts.org/library/1989/Ford/Mustang/interior-mirror-panels https://r2-upload.3dcarparts.workers.dev/file/parts/a233fd53-2044-4744-9887-3853dc142998/images/interior-mirror-panels-1_1769311245071_3rsmj2.jpg in_stock 10.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Ford/Mustang/interior-mirror-panels?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a7f9fa4b-6a98-4e4f-8028-7074301a4d3f 2001 Nissan Maxima Console Trim Panel 969a0-3y103 "Lid Inner, Console Box.
Trim or Accent panel used on the floor console." https://3dcarparts.org/library/2001/Nissan/Maxima/console-trim-panel-969a0-3y103 https://r2-upload.3dcarparts.workers.dev/file/parts/a7f9fa4b-6a98-4e4f-8028-7074301a4d3f/images/Screenshot_2026-01-19_113405_1768847855629_rvlkhu.png in_stock 25.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Nissan/Maxima/console-trim-panel-969a0-3y103?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-499b313b-f26e-4651-aa37-2aad7322074b 1991 Nissan 240SX Cup Holder Cup holder I printer for my buddy's 240sx. Required some modification to the print before installation. I've included the Solidworks part for anyone who wants to make the modification's pre-print. https://3dcarparts.org/library/1991/Nissan/240SX/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/499b313b-f26e-4651-aa37-2aad7322074b/images/cup-holder-1_1768166435279_too3e3.jpg in_stock 29.51 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Nissan/240SX/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e66cfd62-0340-4cb3-9348-e35cc837b9bc 1970 Datsun 240Z Cup Holder Just a simple cupholder for Datsun 240z. Replaces the ashtray in center console. https://3dcarparts.org/library/1970/Datsun/240Z/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/e66cfd62-0340-4cb3-9348-e35cc837b9bc/images/cup-holder-1_1768166399192_cicqhc.jpg in_stock 28.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1970/Datsun/240Z/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-616c797f-a836-4503-b967-b3940dcd46bf 1972 Nissan 240Z Dash Switch & Lighter Support Frame "This is the bracket for a 240z/260z / Fairlady Z that goes behind the dash hazard switch & lighter switch or fog light switch.
There are three versions:
- Standard two switch - same size as original bracket with keyed holes for the two switches
- Standard - switch and lighter - same size as orginal bracket with a keyed hole for the switch and a larger hole for the lighter
- Modified version - switch and lighter. This is a version that has longer offset for the switch & lighter plates. It fits my 1972 Fairlady Z (JDM)." https://3dcarparts.org/library/1972/Nissan/240Z/dash-switch-lighter-support-frame https://r2-upload.3dcarparts.workers.dev/file/parts/616c797f-a836-4503-b967-b3940dcd46bf/images/dash-switch-lighter-support-frame-1_1768166344341_t97xk2.jpg in_stock 8.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1972/Nissan/240Z/dash-switch-lighter-support-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-02e86417-e5f3-41a5-a029-017c84ef384e 1991 Nissan 240SX Hood Prop Spacer It is the little spacer for the rod that props up the hood so that it may pivot properly. Made for a 1991 Nissan 240sx coupe. https://3dcarparts.org/library/1991/Nissan/240SX/hood-prop-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/02e86417-e5f3-41a5-a029-017c84ef384e/images/hood-prop-spacer-1_1768166322736_mkxr2p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1991/Nissan/240SX/hood-prop-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e4b7be6f-1e6a-4b46-9b5a-7db8401cefc1 1995 Nissan 240SX Dash Panel just a remix of a dash panel for a 95-98 nissan 240sx. Wanted something that was simple, with a ddin opening and some 52mm gauges. enjoy. https://3dcarparts.org/library/1995/Nissan/240SX/dash-panel https://r2-upload.3dcarparts.workers.dev/file/parts/e4b7be6f-1e6a-4b46-9b5a-7db8401cefc1/images/dash-panel-1_1768166309131_1xge0l.jpg in_stock 21.03 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/Nissan/240SX/dash-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-79838b60-ae8e-4dd1-8841-46062fb08ab0 1991 Nissan S13 Cup Holder Cup holder to replace ashtray in center console of S13. One base has a lip. Cup depth may need to be adjusted. https://3dcarparts.org/library/1991/Nissan/S13/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/79838b60-ae8e-4dd1-8841-46062fb08ab0/images/cup-holder-1_1768166266127_fppit6.jpg in_stock 18.19 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Nissan/S13/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b883175a-a6e6-4e33-8b74-2fb402a78b66 1991 Nissan S13 Double Din Adapter Bezel "I couldn't find a double din adapter for sale so I decided to design and print one!
This was designed specifically for the [Pioneer DMH-W4660NEX](https://www.bestbuy.com/site/pioneer-6-8-amazon-alexa-built-in-android-auto-apple-carplay-bluetooth-multimedia-digital-media-receiver-black/6401083.p?skuId=6401083) radio, but should work with all double din radios.
Made in tinkercad so you can edit it [here](https://www.tinkercad.com/things/1YMJswJ2MNo)
Should be able to fit the wings to the bezel without glue since the radio fit and the screws into the radio will hold it together." https://3dcarparts.org/library/1991/Nissan/S13/double-din-adapter-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/b883175a-a6e6-4e33-8b74-2fb402a78b66/images/double-din-adapter-bezel-1_1768166243995_msr470.jpg in_stock 18.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Nissan/S13/double-din-adapter-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-affb3693-3d97-433f-b524-6d7316549460 1991 Nissan 240SX Tail Light Lock Cylinder Spacer "Simple spacer to properly position your original Nissan 240SX hatch lock cylinder when converting to 180SX tail lights on the S13, no need for the longer 180SX lock cylinder. Don't forget to put a little sealant on both sides so you don't get water into the car.
Enjoy!" https://3dcarparts.org/library/1991/Nissan/240SX/tail-light-lock-cylinder-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/affb3693-3d97-433f-b524-6d7316549460/images/tail-light-lock-cylinder-spacer-1_1768166230626_gttbyc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1991/Nissan/240SX/tail-light-lock-cylinder-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c85a229-9d98-4637-842f-66c2ed6ce239 2011 Chevrolet Silverado Dash Change Holder This cubby is on the right side of the center cluster. In higher-end (AKA loaded!) trucks some controls go here. But for many of us who don't pay $80K for a vehicle, these are little cubby holes that are useless. So I measured it, went through several fittings and finally came up with this. It works in most materials. I used TPU because it's exposed to temperature extremes and sunlight. https://3dcarparts.org/library/2011/Chevrolet/Silverado/dash-change-holder https://r2-upload.3dcarparts.workers.dev/file/parts/2c85a229-9d98-4637-842f-66c2ed6ce239/images/dash-change-holder-1_1768165012220_1kf6ia.jpg in_stock 16.33 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2011/Chevrolet/Silverado/dash-change-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e2fb506f-f451-4f94-b169-56bed25f742e 1973 Chevrolet C10 Door Bumper This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2ovgE8kgTKH https://3dcarparts.org/library/1973/Chevrolet/C10/door-bumper https://r2-upload.3dcarparts.workers.dev/file/parts/e2fb506f-f451-4f94-b169-56bed25f742e/images/door-bumper-1_1768164952681_6gkkif.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1973/Chevrolet/C10/door-bumper?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f9c4ba4-3c21-45d9-afd1-96a413b60753 1997 Chevrolet GMT400 HVAC Knob "Modified this version of the knob so a lens can be 3d printed to allow light to shine through to retain the backlight. Any transparent filament should work.
Major shoutout to my friend KenSupra for editing the model in a way that allows the light to bleed through.
I also uploaded my 3mf file for anyone that wants it. I use OrcaSlicer as my slicer so obviously your millage may vary." https://3dcarparts.org/library/1997/Chevrolet/GMT400/hvac-knob https://r2-upload.3dcarparts.workers.dev/file/parts/8f9c4ba4-3c21-45d9-afd1-96a413b60753/images/hvac-knob-1_1768164898519_sabxh1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1997/Chevrolet/GMT400/hvac-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aa83bd17-46af-4835-8b78-fbe539660a2e 1996 Chevrolet Silverado Cup Holder This cup holder not only has a space for a cup, but it also has a little storage that you can use for coins or other things, this has been tested to fit perfectly into the vehicle. https://3dcarparts.org/library/1996/Chevrolet/Silverado/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/aa83bd17-46af-4835-8b78-fbe539660a2e/images/cup-holder-1_1768164848590_cj8pdd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Chevrolet/Silverado/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-af68af81-ef3e-41f5-89c2-e81691f2ba3f 1994 Chevrolet Various Cup Holder Retainer Clip v4.2 will actually work... now that I have one to measure. For 1989-98ish to hold in-dash cup holder in. print test circle if your printer is too fucked to print right size (the thing should fit WITH EXTRA FN ROOM like .8 mm of extra room that's how they are oem fight chevy not me this is an exact replica in function). https://3dcarparts.org/library/1994/Chevrolet/Various/cup-holder-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/af68af81-ef3e-41f5-89c2-e81691f2ba3f/images/cup-holder-retainer-clip-1_1768164792500_vhk8y0.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Chevrolet/Various/cup-holder-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e70c88c8-0573-4e75-9c9b-067b85a3586c 2000 Chevrolet Silverado Headlight / HVAC Control Knobs & Switch Panel "Designed these to fit my 2000 Chevy Silverado. Pretty basic design that I thought looked nice.
The ""insert"" was snug enough that a press fit will hold it in place with no adhesive.
Use the test prints to make sure the knobs fit snug. HVAC controls will reuse metal inserts on factory knobs.
The switch panel is only for use with vehicles equipped with floor mounted 4x4 control. This will replace the ""wallet"" pocket to the left of the steering wheel." https://3dcarparts.org/library/2000/Chevrolet/Silverado/headlight-hvac-control-knobs-switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/e70c88c8-0573-4e75-9c9b-067b85a3586c/images/headlight-hvac-control-knobs-switch-panel-1_1768164688838_d60g5s.jpg in_stock 7.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Chevrolet/Silverado/headlight-hvac-control-knobs-switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-12aea404-a482-4ff8-b47a-7e4305e94d1c 2022 Land Rover Defender Cargo Ceiling Hook Base Plate Adapter "Add some proper ceiling hooks in your Defender!
3D printed base plate adapter allows the use of tie down anchors from Gmc/Chevy (Sierra, Silverado, Colorado) pickups.
requires :
- to remove the cover plate from ceiling (see photo - careful with plastic pins),
- 3D print the above plate/adapter,
-
2x GMC/Chevy tie down
- 2x 3/8inx1.5in carriage bolt + washer + nut (note - I used some Perma Blue to cold bluing the steel bolt)
I use the hook to add a cheap pet barrier/cargo divider with a jeep JK/JL cover" https://3dcarparts.org/library/2022/Land%20Rover/Defender/cargo-ceiling-hook-base-plate-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/12aea404-a482-4ff8-b47a-7e4305e94d1c/images/cargo-ceiling-hook-base-plate-adapter-1_1768164666433_zw5n73.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Land%20Rover/Defender/cargo-ceiling-hook-base-plate-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2b7b482a-ce60-465a-9eaf-2de7c4d1282d 1998 Chevrolet Silverado Tailgate Handle Rod Clips "This is a tailgate handle rod clip for chevy trucks, it should fit any 1981-1998 C/K 1500, 2500, or 3500. I designed this after buying an old 98 silverado, and found that it was missing one of these clips, which kept the tailgate handle from working properly. Hopefully some of you will find it helpful.
I printed this with regular pla on an ender 3, doesn't require anything special outside of supports. You will most likely need to file it a little bit on some spots to make everything fit easily, but when i printed it it was pretty much good to go." https://3dcarparts.org/library/1998/Chevrolet/Silverado/tailgate-handle-rod-clips https://r2-upload.3dcarparts.workers.dev/file/parts/2b7b482a-ce60-465a-9eaf-2de7c4d1282d/images/tailgate-handle-rod-clips-1_1768164645062_qcxlz5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1998/Chevrolet/Silverado/tailgate-handle-rod-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6a142ef2-59ec-4610-80ad-d8f630d136f7 2009 Chevrolet Silverado Microphone Adapter "Long ago, I upgraded the head unit in my 09 Silverado to an aftermarket unit that included an external Microphone for hands-free bluetooth calling. I was always annoyed that these manufactures could never figure out how to use the OEM mic hidden in the overhead console to help get a better ""stealth"" install.
Recently, I upgraded the head unit again to an Eonon Android-based one because I wanted Apply CarPlay. But it too required installation of an ugly external mic. This time, I wanted to get that fully stealth setup.
First, I tried using the OEM mic by cutting the oem plug off and soldering on a generic plug. This worked but the sound quality stunk (a common complaint with them by many GM/Chevy owners). Part of the problem could be that if you look inside it, the mic hardware is sitting sideways. Seems kind of dumb. And who know the quality of the mic they used.
After comparing the sound quality of the aftermarket mic, I decided it was the one to use. I fabricated this part to clip into the OEM location but having the mic down fire right into the cabin. This required extracting the actual mic hardware from the plastic housing mount which was simple. Once I did that, I was able to get measurements for the mic itself - about 10mm.
Note that I have uploaded both the ""cut"" version with a 10.5mm hole for my mic and an ""uncut"" version that is solid so you can edit or simply drill out for you mic if it is a different size.
With this, the sound quality is significantly better." https://3dcarparts.org/library/2009/Chevrolet/Silverado/microphone-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/6a142ef2-59ec-4610-80ad-d8f630d136f7/images/microphone-adapter-1_1768164613876_9iwqr9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2009/Chevrolet/Silverado/microphone-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ad5aeff3-078d-4259-a026-4de43046393a 1998 Chevrolet Universal Keyless Entry Fob 98-01 CHEVY KEYLESS ENTRY FOB https://3dcarparts.org/library/1998/Chevrolet/Universal/keyless-entry-fob https://r2-upload.3dcarparts.workers.dev/file/parts/ad5aeff3-078d-4259-a026-4de43046393a/images/keyless-entry-fob-1_1768164597307_3xsc6j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1998/Chevrolet/Universal/keyless-entry-fob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-42373a78-f123-4e31-b317-2fb5ca57685c 1988 Volvo 740 Speaker Adapter "Hi,
This is a speaker adapter for a 1988 Volvo 740. The factory mounts are oval and this allows a 5.25'' (13cm) speaker to be used in the doors. It also allows the original cover to be put back in place.
Front and back doors are the same so it will work for both. Will probably fit other Volvos are this era too.
New screws that come with speakers to be used to mount to door and old screws from original speaker to be used to mount new speaker on adapter.
Note: You will more than likely have to modify the speaker mounting bracket.
Happy printing!" https://3dcarparts.org/library/1988/Volvo/740/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/42373a78-f123-4e31-b317-2fb5ca57685c/images/speaker-adapter-1_1768164557053_vx5yw3.jpg in_stock 13.18 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1988/Volvo/740/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-46406dfd-e328-4757-a284-205ddeb0006c 2012 Volvo V40 Bin Trash bin for putting behind the front central console in a Volvo V40. It also has a small compartment for customer cards on the left, and a tray for coins on the right (with a indentation to be able to grip a coin more easily). https://3dcarparts.org/library/2012/Volvo/V40/bin https://r2-upload.3dcarparts.workers.dev/file/parts/46406dfd-e328-4757-a284-205ddeb0006c/images/bin-1_1768164531476_5w28kq.jpg in_stock 19.92 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Volvo/V40/bin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aad6c2a4-9b3c-41db-8f0b-eace4495459d 1990 Volvo 240 Rear Seat Release Handle "To all Volvo 240 lovers. This piece got broken. It's really a thin piece of plastic, I can understand the manufacturing reasons for doing it in that way.
You can find it new, maybe with a lot of other pieces you don't need. To verify just search for ""Volvo 3521830"", you'll find it! At a cost of 20$ or 18€ to buy that new. Well, it's right, and I recommend to buy an original one.
In case you are not so devote to original pieces you can print this one, and mount yourself!
I really hope it can help!" https://3dcarparts.org/library/1990/Volvo/240/rear-seat-release-handle https://r2-upload.3dcarparts.workers.dev/file/parts/aad6c2a4-9b3c-41db-8f0b-eace4495459d/images/rear-seat-release-handle-1_1768159304854_ueiqv9.jpg in_stock 10.04 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/240/rear-seat-release-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5bd7a3dd-e0ed-496a-bd6e-5d3766d6b471 1986 Volvo 740 Gauge Pod "Heres an easy Volvo 740 760 940 960 vent gauge pod.
You need 2 printed of these and then holding the pieces around the gauge push all of them in. Super Snug fit! Vent plastic may expand a little but no problems for me.
In the picture mounted in a 1986 760 GLE
Please donate if you want to support me for more downloadable 3D parts for our beloved Ikea Bricks!" https://3dcarparts.org/library/1986/Volvo/740/gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/5bd7a3dd-e0ed-496a-bd6e-5d3766d6b471/images/gauge-pod-1_1777605929827_ne2cap.jpg in_stock 11.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1986/Volvo/740/gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eac9e9f8-487e-4a1f-b5fb-88e0dd74019d 1994 Volvo 940 Single Din Stereo Trim "Allows you to install a single DIN aftermarket stereo in a Volvo 940.
Been using it with a pioneer unit for close to 2 years without issue." https://3dcarparts.org/library/1994/Volvo/940/single-din-stereo-trim https://r2-upload.3dcarparts.workers.dev/file/parts/eac9e9f8-487e-4a1f-b5fb-88e0dd74019d/images/single-din-stereo-trim-1_1768158904923_0sdqp0.jpg in_stock 25.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Volvo/940/single-din-stereo-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-812a9cb3-e831-4158-a839-f2ad748dabf8 2004 Volvo V70 Drink Holder Drink holder. https://3dcarparts.org/library/2004/Volvo/V70/drink-holder https://r2-upload.3dcarparts.workers.dev/file/parts/812a9cb3-e831-4158-a839-f2ad748dabf8/images/drink-holder-1_1768158845496_f3dadg.jpg in_stock 29.99 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Volvo/V70/drink-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-221b02dd-b3b3-4303-a5ab-dcf3bbf5fe25 1988 Volvo 740 2-DIN Stereo Frame "This stereo frame was designed to fit a 1988 Volvo 740 GLE saloon, but it possibly works just as well on 760, 940 and 960.
I installed a Sony XAV-1000AX stereo, which fits pretty well (without the metal bracket, just the stereo). Underneath the stereo, I added a pocket which fits an iPhone X with room to spare. The pocket does touch some of the bigger fuses, otherwise the whole frame would be able to slide a few milimeters deeper.
The [original Thing](https://www.thingiverse.com/thing:4586161) had gauges instead of this pocket, in case you would be more interested in that." https://3dcarparts.org/library/1988/Volvo/740/2-din-stereo-frame https://r2-upload.3dcarparts.workers.dev/file/parts/221b02dd-b3b3-4303-a5ab-dcf3bbf5fe25/images/2-din-stereo-frame-1_1777605926929_p8laag.jpg in_stock 33.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1988/Volvo/740/2-din-stereo-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-10984955-f52c-4480-afb5-a5362ab07885 1990 Volvo 240 Gauge Bezel "Original OEM gauge bezels are getting harder and more expensive to find. these will accept 52mm gauges and when using the back ring(file included) it does not require the OEM gauge mounts so this print replaces both the front bezel and the rear mount.
I used a clear PETG. Post processing included sanding(320 grit), bondo, primer, SEM black trim paint.
For single or double bezel, print PETG standing up for strength in clips.
For triple bezel, print PETG face down against bed.
Tree supports worked well for me.
Back ring is used to slip on the back of gauge that doesn't have a twist on ring for securing in place, the file makes a 51mm ring printed with TPU to be snug on a 52mm gauge. Scale if too large or small." https://3dcarparts.org/library/1990/Volvo/240/gauge-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/10984955-f52c-4480-afb5-a5362ab07885/images/gauge-bezel-1_1777605924914_8nb5a4.jpg in_stock 19.44 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/240/gauge-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-84d5713e-b54c-416a-819c-32b27e1db48c 1990 Volvo 240 Door Pocket Clip Clip for the Door pocket (the one that's broken, you know) https://3dcarparts.org/library/1990/Volvo/240/door-pocket-clip https://r2-upload.3dcarparts.workers.dev/file/parts/84d5713e-b54c-416a-819c-32b27e1db48c/images/door-pocket-clip-1_1768158705361_h2zz9o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/240/door-pocket-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b5a7024b-8717-42a9-be03-6d915a39267e 2012 Volvo V40 Center Console Cupholder "A cupholder in the center console to a Volvo V40 with 29mm hole for power outlet.
Its a little tight, but it works. (You may have to use some sandpaper)" https://3dcarparts.org/library/2012/Volvo/V40/center-console-cupholder https://r2-upload.3dcarparts.workers.dev/file/parts/b5a7024b-8717-42a9-be03-6d915a39267e/images/center-console-cupholder-1_1768158684318_i6gurf.jpg in_stock 25.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Volvo/V40/center-console-cupholder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-56d9e46b-fad5-469d-84ee-663357345537 2020 Chevrolet Silverado Jump Seat Rear Vent Plug If you're like me and you have a Work truck but heaven forbid you have center storage, you can get a take off from a more expensive model. The problem is they have a hole in the rear for the vent port and I don't want things just falling inside my seat. This makes a perfect plug that you can just pop in to cover that hoel. https://3dcarparts.org/library/2020/Chevrolet/Silverado/jump-seat-rear-vent-plug https://r2-upload.3dcarparts.workers.dev/file/parts/56d9e46b-fad5-469d-84ee-663357345537/images/jump-seat-rear-vent-plug-1_1768158652539_tx8syz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Chevrolet/Silverado/jump-seat-rear-vent-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2b54f660-e7d1-4920-bf3e-30802c15c604 2026 Chevrolet Equinox Front 6x9 Speaker Mount "When upgrading the speakers on my 2026 Chevy Equinox I discovered that there were not any speaker mounts for the fronts (6x9). The recommended mounts to use with a 2025 equinox were about 15mm too tall and wouldn't allow the door panel to be reinstalled. So I banged together this mount using tinkercad. It's not the prettiest or the best, but it did the job quite nicely.
The mounting holes for the speaker aren't perfect, but for mine I was able to line up one pair of diagonal holes, then just punch a hole for the other two and drove the screw through it. Worked just fine.
I recommend some foam tape on the back side of this mount (where it touches the metal car door) similar to what's on the factory speakers back side. Just a thin foam will be enough to prevent any wobbles/rattles.
To print, flip it over so that the speaker mount side is on the build plate, and add supports for the two tongues on each end. I recommend 4-6 layers top and bottom and at least 4 walls for strength and durability. If you rotate it so that it goes corner-to-corner diagonally on the build plate, it will fit on a 10x10 plate (256mm square). It fit on my Bambu A1 but just barely.
Like I said it's not perfect, but it does the job.
Enjoy!" https://3dcarparts.org/library/2026/Chevrolet/Equinox/front-6x9-speaker-mount https://r2-upload.3dcarparts.workers.dev/file/parts/2b54f660-e7d1-4920-bf3e-30802c15c604/images/front-6x9-speaker-mount-1_1777605872594_pv6ayj.jpg in_stock 29.84 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2026/Chevrolet/Equinox/front-6x9-speaker-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-13cfff2a-073e-44df-850f-da936c021680 2003 Chevrolet Silverado Radio Knob "Made this to replace the broken/missing knob on my 2003 Chevy Silverado BOSE 6 CD Changer Radio. Made it a little loose and put a drop of glue in it to hold it. Works great, looks great.
Designed with Sketchup. Printed with Black Hatchbox PLA with a 10% infill.
If you print this please post a photo!" https://3dcarparts.org/library/2003/Chevrolet/Silverado/radio-knob https://r2-upload.3dcarparts.workers.dev/file/parts/13cfff2a-073e-44df-850f-da936c021680/images/radio-knob-1_1768158566636_3a7ohb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2003/Chevrolet/Silverado/radio-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bc63f3c6-fbf6-445e-b015-bff170808751 2019 Chevrolet Silverado Matt Plug If you're like me and you have Vinyl floors but still want mats, you'll find the the chevy ones have holes for the carpet clips. I designed these to plug the holes and they work great. https://3dcarparts.org/library/2019/Chevrolet/Silverado/matt-plug https://r2-upload.3dcarparts.workers.dev/file/parts/bc63f3c6-fbf6-445e-b015-bff170808751/images/matt-plug-1_1768158543073_h242o9.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2019/Chevrolet/Silverado/matt-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a958c3a2-40cb-4d02-a6e7-3fb80ca698e5 2007 Chevrolet Silverado Double Din Radio Bezel Made to work with Scosche ICGM10BN on my Chevy Silverado. I didn't like the gaps at the top of the bezel and wanted a different look. https://3dcarparts.org/library/2007/Chevrolet/Silverado/double-din-radio-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/a958c3a2-40cb-4d02-a6e7-3fb80ca698e5/images/double-din-radio-bezel-1_1768158478353_ahyvrm.jpg in_stock 13.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Chevrolet/Silverado/double-din-radio-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e5b748e7-99d4-4373-9ba1-67317ecaf88d 2024 Chevrolet Silverado EV Compartment Cover with Wireless Charger Chevy Silverado center console compartment cover with https://3dcarparts.org/library/2024/Chevrolet/Silverado%20EV/compartment-cover-with-wireless-charger https://r2-upload.3dcarparts.workers.dev/file/parts/e5b748e7-99d4-4373-9ba1-67317ecaf88d/images/compartment-cover-with-wireless-charger-1_1768158434081_m16r8t.jpg in_stock 43.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2024/Chevrolet/Silverado%20EV/compartment-cover-with-wireless-charger?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7dc1c76-9b4e-403b-bf42-1bf25ae57db3 2007 Volvo V70 Reverse Camera Adapter "A reverse camera adapter that replaces one of the license plate lights.
Yes, you do then lose that light so if your local traffic regulations are applied too strictly then don't use it.
Unfortunately supports are needed." https://3dcarparts.org/library/2007/Volvo/V70/reverse-camera-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/f7dc1c76-9b4e-403b-bf42-1bf25ae57db3/images/reverse-camera-adapter-1_1768158315131_g5qg4q.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2007/Volvo/V70/reverse-camera-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eed48506-903a-44ee-9f61-126ae20a446e 1990 Volvo 240 Sunvisor Clip Just my design of the Sunvisor Clip of my old 240 Volvo. Super Simple. https://3dcarparts.org/library/1990/Volvo/240/sunvisor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/eed48506-903a-44ee-9f61-126ae20a446e/images/sunvisor-clip-1_1768158240868_liu19v.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/240/sunvisor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bab85213-3c3c-495c-8dd6-3cabafb7c11a 1990 Volvo 740/960 Door Clip "Needed an door clip for Volvo 740 and 960 so heres a basic design that should snap in. Copied from a 960. Takes about 10 minutes to print. PETG recommended but i made it in PLA.
Update: Made a new version that looks more like the original now when i have more experience of 3d modeling. One is like original and one is with a pulltab so you can easier remove it with pliers. can be a pain on stock tab." https://3dcarparts.org/library/1990/Volvo/740%2F960/door-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bab85213-3c3c-495c-8dd6-3cabafb7c11a/images/door-clip-1_1768158166613_gjlqba.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/740%2F960/door-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6b3ecc0b-8ea3-4d18-a5a5-604be2193e7f 1990 Volvo 740 Door Clip Pin "The pins that hold the front door panel in my Volvo 740 estate were broken and the panel was loose.
I designed the original pin but the plastic didn't had the strength to hold. So I modified the original pin. The custom part has a thread instead of a spring and a nut is used to secure it from the inside of the door structure.
So far this is holding the panel very well.
The original and custom parts are attached.
Enjoy." https://3dcarparts.org/library/1990/Volvo/740/door-clip-pin https://r2-upload.3dcarparts.workers.dev/file/parts/6b3ecc0b-8ea3-4d18-a5a5-604be2193e7f/images/door-clip-pin-1_1768158080788_zbkhej.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/740/door-clip-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-53baf940-377e-44c6-9bc9-525f3bbc33c5 2004 General Motors Radio Radio Equalizer Knobs The original knobs on the radio all split down the middle, so after trying unsuccessfully to find more in various junkyards, I decided to design new ones and print them. After they were done, I put some white paint I had laying around and brushed some into the recessed line to see where it was pointing better. Each one only takes around 4 minutes to print on a slower speed, use high resolution, infill doesn't really matter. It uses the original tension clips that go on the knob post, so make sure you take them out of the original knobs or off of the post before trying to put them on. https://3dcarparts.org/library/2004/General%20Motors/Radio/radio-equalizer-knobs https://r2-upload.3dcarparts.workers.dev/file/parts/53baf940-377e-44c6-9bc9-525f3bbc33c5/images/radio-equalizer-knobs-1_1768158032409_56m4lw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/General%20Motors/Radio/radio-equalizer-knobs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0e85f29d-020c-4947-b1d4-9465095f6390 1998 Chevrolet Tahoe Radio Volume Knob This is a Radio Volume Knob for the radio in a 1995-2002 GM CHEVY TAHOE SILVERADO https://3dcarparts.org/library/1998/Chevrolet/Tahoe/radio-volume-knob https://r2-upload.3dcarparts.workers.dev/file/parts/0e85f29d-020c-4947-b1d4-9465095f6390/images/radio-volume-knob-1_1768157974519_fk1ag4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Chevrolet/Tahoe/radio-volume-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aee30878-ed86-45ff-aacd-203098e87771 1990 Nissan 300ZX T-Top Handle "The original file is great, but I had problems with the handle fatiguing once under load. Went in and thickened it out to make it more stable.
This is for the driver’s side T-Top, you will have to mirror it along Y-axis in your slicer for the passenger side.
Printed using PETG on a Bambu A1
Infill pattern adaptive cubic at 50%" https://3dcarparts.org/library/1990/Nissan/300ZX/t-top-handle https://r2-upload.3dcarparts.workers.dev/file/parts/aee30878-ed86-45ff-aacd-203098e87771/images/t-top-handle-1_1768157891704_ycd3yv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/t-top-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d6dfa0da-fa06-4601-8e17-f88822f279b4 1991 Volvo 940 Door Handle Clips "i needed new clips for the doorhandles on my volvo 960 3.0 so i made this.
printet on the side with supports. give it two swipes on the side with a file to remove support remains and it fits 100%" https://3dcarparts.org/library/1991/Volvo/940/door-handle-clips https://r2-upload.3dcarparts.workers.dev/file/parts/d6dfa0da-fa06-4601-8e17-f88822f279b4/images/door-handle-clips-1_1768154011697_8mlmj6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1991/Volvo/940/door-handle-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b58a5e8e-83fa-4d40-a0db-1a4c10b6cdd1 2006 Volvo XC70 Fog Light Cover I have been working on my 2006 Volvo XC70 to make a tribute to the Volvo AT Concept. Made up these covers after covering the plastic bumpers with bed liner. https://3dcarparts.org/library/2006/Volvo/XC70/fog-light-cover https://r2-upload.3dcarparts.workers.dev/file/parts/b58a5e8e-83fa-4d40-a0db-1a4c10b6cdd1/images/fog-light-cover-1_1768153990274_1b6ocz.jpg in_stock 10.20 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Volvo/XC70/fog-light-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-34185dcd-427d-4a4b-ba9b-4d87b39f8601 2004 Volvo S60 Center Console Screw "It's the ""screw"" number 18 in the explosion picture." https://3dcarparts.org/library/2004/Volvo/S60/center-console-screw https://r2-upload.3dcarparts.workers.dev/file/parts/34185dcd-427d-4a4b-ba9b-4d87b39f8601/images/center-console-screw-1_1768153883438_tjl0s3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Volvo/S60/center-console-screw?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-91fb3f7d-9aaf-4cdf-a042-c71ec39f920d 1978 Volvo B18/B20 Clutch Centering Tool Clutch centering tool for classic Volvos with B18 and B20 pushrod engines until 1978. Ten-spline shaft. https://3dcarparts.org/library/1978/Volvo/B18%2FB20/clutch-centering-tool https://r2-upload.3dcarparts.workers.dev/file/parts/91fb3f7d-9aaf-4cdf-a042-c71ec39f920d/images/clutch-centering-tool-1_1768153866827_4l2gkd.jpg in_stock 14.69 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1978/Volvo/B18%2FB20/clutch-centering-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-752ea2aa-250e-4b15-ae95-a55c77498c2d 1992 Volvo 940 Radio Frame "I wanted a new stereo with Bluetooth and reversing camera for my old Volvo 940 and found a really cheap 2 DIN from China, only known as 7018B.
It doesn't use a metal frame, the radio is put in the frame and then the entire thing is mounted in the car. No screws used, But it tend to bow out at the bottom end, but I might have a fix for that soon.
Edit: Added a lock that slips on the DC outlet behind the panel. Swivel it out behind the panel and tighten the nut on the DC outlet to lock everything together.
The volt meter is a small module, can't fin the exact same anymore but there are very similar looking on eBay, I hope they work. If you use thin wires make sure to add an inline fuse on + so the wires don't catch fire if they short out, or just use solder in some thicker wire.
Update 2021: I have uploaded a model with 2 holes for outlets or compatible modules like phone chargers or volt meters.
The DC outlet is from a local store, but I saw some on eBay looking exactly the same. It had a cover saying ""MARINE 12V"" ond the text ""LOCK POINT"" on the outside of the plug.
The stereo name is 7018B and is a really cheap 2 DIN model, if you want to use another stereo make sure it have the right mounting holes and actually fit the frame (check out cad link below).
Created with OnShape: https://cad.onshape.com/documents/9fa29f8e3b761c18b8d866c6/w/b9bebdb79349f763eac27e10/e/d7ce5405a8b101db1755ed24" https://3dcarparts.org/library/1992/Volvo/940/radio-frame https://r2-upload.3dcarparts.workers.dev/file/parts/752ea2aa-250e-4b15-ae95-a55c77498c2d/images/radio-frame-1_1768153825139_60w6q1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1992/Volvo/940/radio-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-863dd545-b555-4bc2-9930-218b0185235a 2016 Volvo V70 Speaker Adapter "Adapter for Aftermarket 6.5"" speakers.
Speaker screws directly in to the plastic.
Fits realy good in the orginal mounting holes.
works with alot of volvo cars:
(F=Front and R=Rear)
VOLVO V70 (2014 - 2016) F&R
VOLVO V70 (2008 - 2013) F&R
VOLVO V40 (2012 - 2017) F&R
VOLVO S40 (2008 - 2012) F&R
VOLVO S80 (2014 - 2017) F&R
VOLVO S80 (2007 - 2013) F&R
VOLVO S60 (2014 - 2017) F&R
VOLVO S60 (2011 - 2013) F&R
VOLVO V50 (2008 - 2012) F&R
VOLVO V50 (2004 - 2007) F&R
VOLVO XC70 (2014 - 2016) F&R
VOLVO XC70 (2008 - 2013) F&R
VOLVO XC60 (2014 - 2017) F&R
VOLVO XC60 (2009 - 2013) F&R
VOLVO C30 (2010 - 2013) F
VOLVO C30 (2007 - 2010) F
VOLVO V60 (2014 - 2017) F&R
VOLVO V60 (2011 - 2013) F&R
VOLVO V60 CROSS COUNTRY (2016 - 2017) F&R" https://3dcarparts.org/library/2016/Volvo/V70/speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/863dd545-b555-4bc2-9930-218b0185235a/images/speaker-adapter-1_1768153433984_gwnmc1.jpg in_stock 21.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2016/Volvo/V70/speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54def821-4260-4ee2-bd55-dfe329347e17 1990 Volvo 940 Midvent Gauge Midvent for volvo 940 https://3dcarparts.org/library/1990/Volvo/940/midvent-gauge https://r2-upload.3dcarparts.workers.dev/file/parts/54def821-4260-4ee2-bd55-dfe329347e17/images/midvent-gauge-1_1768153403969_s3jj66.jpg in_stock 16.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/940/midvent-gauge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e671d167-231a-4e10-9d8a-d26ea4bc9f0a 2011 Volvo V60 Funnel for Windshield Washer Liquid This funnel fits exactly into the washer fluid opening of a Volvo V60. It has a double wall that contains 4 channels for venting. Needless to say that you have to print upside down to prevent supports https://3dcarparts.org/library/2011/Volvo/V60/funnel-for-windshield-washer-liquid https://r2-upload.3dcarparts.workers.dev/file/parts/e671d167-231a-4e10-9d8a-d26ea4bc9f0a/images/funnel-for-windshield-washer-liquid-1_1768153318582_6vubdo.jpg in_stock 25.79 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/2011/Volvo/V60/funnel-for-windshield-washer-liquid?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-654dda80-5cb6-488f-a4a5-17738f3eb618 2000 Volvo S40/V40 Headlight Adjuster VOLVO S40 / V40 HEADLIGHT ADJUSTER https://3dcarparts.org/library/2000/Volvo/S40%2FV40/headlight-adjuster https://r2-upload.3dcarparts.workers.dev/file/parts/654dda80-5cb6-488f-a4a5-17738f3eb618/images/headlight-adjuster-1_1768153073166_e3wip3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2000/Volvo/S40%2FV40/headlight-adjuster?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-836d39cd-76e1-4c42-a4f0-ba0d80463405 2006 Volvo XC70 Seat Knob Adjustment knob for a Volvo 2006 XC70 front seat. Designed and printed it, worked the first time. https://3dcarparts.org/library/2006/Volvo/XC70/seat-knob https://r2-upload.3dcarparts.workers.dev/file/parts/836d39cd-76e1-4c42-a4f0-ba0d80463405/images/seat-knob-1_1767937588924_kz7fy6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Volvo/XC70/seat-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c46074ea-b73b-4db0-9128-622714ba4d38 2000 Volvo V40 Luggage Cover Hold Clamp "The antique Volvo v40 we recently bought misses some parts.
So why not redesign and print ?
This part should hold the cover in place ( when extracted) over the luggage compartiment.
Please Like before collecting
Thomas
www.3Daybreaker.blogspot.com" https://3dcarparts.org/library/2000/Volvo/V40/luggage-cover-hold-clamp https://r2-upload.3dcarparts.workers.dev/file/parts/c46074ea-b73b-4db0-9128-622714ba4d38/images/luggage-cover-hold-clamp-1_1767937558291_3esrqd.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Volvo/V40/luggage-cover-hold-clamp?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aab3c5d3-5e17-4e4f-ba3a-25eb994f3da1 2007 Volvo XC70 Luggage Hook Luggage hooks for the trunk of your XC70. If you are fed up with paying 400+ rubles for a piece of aluminum - print it from plastic with a penny cost price. And yes, there are three versions - close to the original and two more convenient for bags with booze (so that bottles do not rattle on bumps) and for small fishing rods (if you like to carry rods in the car). Good luck. https://3dcarparts.org/library/2007/Volvo/XC70/luggage-hook https://r2-upload.3dcarparts.workers.dev/file/parts/aab3c5d3-5e17-4e4f-ba3a-25eb994f3da1/images/luggage-hook-1_1767937474532_wekk26.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Volvo/XC70/luggage-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ee33f141-e78b-44cb-8104-b812cc3f4c01 2013 Volvo V40 Trunk Hook "## Volvo V40 Trunk-hook ##
Designed this Trunk-hook for my Volvo V40. Keeps grocerybags and other stuff from sliding all over the place in the trunk. Made of 3 parts to get maximum strength. Assemble the parts with some suitable screws. You can see the dimmensions of the screws I used in the pictures. Similar screws will do just fine.
Fasten hook to the baseplate first, tread it into the holes in the trunk, and then secure it in place with the lockplate. The hook is angled 6 degrees onto the baseplate, because the holes in the trunk is about 6 degrees angled.
My V40 is a 2013 model, but I guess it will fit earlier/later V40's also.
If you make this, I would appriciate it if you upload a picture of it! Enjoy! =)" https://3dcarparts.org/library/2013/Volvo/V40/trunk-hook https://r2-upload.3dcarparts.workers.dev/file/parts/ee33f141-e78b-44cb-8104-b812cc3f4c01/images/trunk-hook-1_1767937430954_jim4rc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2013/Volvo/V40/trunk-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3560b1a6-4986-4b9a-8be8-547bc0ef6612 2004 Volvo S40 Boot Upholstery Clip Volvo s40 ii boot upholstery clip https://3dcarparts.org/library/2004/Volvo/S40/boot-upholstery-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3560b1a6-4986-4b9a-8be8-547bc0ef6612/images/boot-upholstery-clip-1_1767937394273_zmaw3o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Volvo/S40/boot-upholstery-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-035dc023-7afc-4e0e-9d2e-00701536b23c 1990 Volvo 240 Blank Switch Cover Blank switch cover for Volvo 240. https://3dcarparts.org/library/1990/Volvo/240/blank-switch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/035dc023-7afc-4e0e-9d2e-00701536b23c/images/blank-switch-cover-1_1767937360724_3rgmhs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/240/blank-switch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-717efe12-7a51-49d9-81a2-eb64fded466f 1990 Volvo 740/940 Ceiling Lamp Clip Original clip cracked so i made replacement part https://3dcarparts.org/library/1990/Volvo/740%2F940/ceiling-lamp-clip https://r2-upload.3dcarparts.workers.dev/file/parts/717efe12-7a51-49d9-81a2-eb64fded466f/images/ceiling-lamp-clip-1_1767937328567_cojun7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/740%2F940/ceiling-lamp-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-acc191d2-4d84-48b6-ba2e-d0bb5ac03ccf 2012 Volvo C70 Headliner Clip "Designed this Volvo clip for a friend using TinkerCAD.
Slots into this receiver: https://www.thingiverse.com/thing:4915558 by mi540i.
Printed as oriented with no supports at .12 layer height
Volvo part # 31256449 included in repair kit 31256445" https://3dcarparts.org/library/2012/Volvo/C70/headliner-clip https://r2-upload.3dcarparts.workers.dev/file/parts/acc191d2-4d84-48b6-ba2e-d0bb5ac03ccf/images/headliner-clip-1_1767937317933_qiy2kv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Volvo/C70/headliner-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a002d220-4f27-45e3-a124-af563c988c6b 1990 Volvo 740/940 Seat Rail Covers Repair Clips Volvo 940 / 740 seat rail covers repair clips, glued to original cover with CA, works well. https://3dcarparts.org/library/1990/Volvo/740%2F940/seat-rail-covers-repair-clips https://r2-upload.3dcarparts.workers.dev/file/parts/a002d220-4f27-45e3-a124-af563c988c6b/images/seat-rail-covers-repair-clips-1_1767937293328_cvmpdz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Volvo/740%2F940/seat-rail-covers-repair-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cd22ae5a-7141-4308-b1ea-1cdcbdd3ba47 2005 Volvo S60 Boost Gauge Pod "This is a boost gauge pod (52mm) for Volvo P2 S60/V70 (maybe other models too). There are a few options to choose from - with R logo or without, sunked-in gauge or not.
Sunked-in design is based on my boost gauge and might not work for you (outer diameter of boost gauge 58mm and 10mm deep).
I 3D scanned cars interior for the pod to fit perfectly between A-pillar and dashboard. Vacuum hose (8mm outer diameter) comes from the back and is routed through the corner of window/A-pillar/dashboard.
Pod has two protrusions on the side for attachment. Just insert it in the gap between dashboard and A-pillar.
Sandpaper, filler, primer and paint is always an option!" https://3dcarparts.org/library/2005/Volvo/S60/boost-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/cd22ae5a-7141-4308-b1ea-1cdcbdd3ba47/images/boost-gauge-pod-1_1767937104821_lofcwx.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Volvo/S60/boost-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-81e96630-4b79-4425-a2b9-b3f2d9f1a1aa 2008 Dodge Charger Auxiliary Switchboard "Have you ever wished you could have switches in your early LX car? Well now you can! I provided 4 files, basically its provided in one or two parts, with or without the ""Daytona"" logo. I printed it in two pieces on a Lulzbot mini 1.03 with the High Detail 0.18mm preset with scaffolding. I mounted it with zipties as seen in the photo and its pretty secure. Feel free to modify/distribute to your hearts content" https://3dcarparts.org/library/2008/Dodge/Charger/auxiliary-switchboard https://r2-upload.3dcarparts.workers.dev/file/parts/81e96630-4b79-4425-a2b9-b3f2d9f1a1aa/images/auxiliary-switchboard-1_1767928780627_frw6yj.jpg in_stock 9.65 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2008/Dodge/Charger/auxiliary-switchboard?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f497b468-b15c-424e-80d8-dd8de3579143 2009 Dodge Charger Visor Hook Visor hooks for the 2009 - 2010 (maybe all years above 2008?) Dodge Charge (300?) have large rods. The only ones you can buy are for smaller rods and will not work. This is a replication (thanks to Tinker3D) and works for mine (2009 Charger). https://3dcarparts.org/library/2009/Dodge/Charger/visor-hook https://r2-upload.3dcarparts.workers.dev/file/parts/f497b468-b15c-424e-80d8-dd8de3579143/images/visor-hook-1_1767928751135_i5joku.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Dodge/Charger/visor-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e001d09d-4b22-41ea-a88d-792e163522ce 2017 Dodge Journey Oil Filter Cap Remover "My Dodge Journey 2017 oil filter is located on top beside the engine.
You will need a wrench socket to turn the cap and extract the oil filter inside.
Well, not everyone has a wrench with specific socket for this cap, so the idea was to have one and must be portable and can be put away easily. There is no need to fully close tight, just a snug hand tight is all it need and this device i'm sure will do the job." https://3dcarparts.org/library/2017/Dodge/Journey/oil-filter-cap-remover https://r2-upload.3dcarparts.workers.dev/file/parts/e001d09d-4b22-41ea-a88d-792e163522ce/images/oil-filter-cap-remover-1_1777605822224_wef3lt.jpg in_stock 9.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2017/Dodge/Journey/oil-filter-cap-remover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b42d208f-126c-4ba5-bcdb-00623278c51a 2010 GMC Yukon Cup Holders "Factory cup holders did not fit our Nalgene water bottles so I made this.
Should fit GM pickups 2007-2013 and Yukon/Suberban/Tahoe 2007-2014.
For temperature resistance I recommend printing in PTEG or similar as PLA may start to warp in the heat." https://3dcarparts.org/library/2010/GMC/Yukon/cup-holders https://r2-upload.3dcarparts.workers.dev/file/parts/b42d208f-126c-4ba5-bcdb-00623278c51a/images/cup-holders-1_1767928692108_6g17gj.jpg in_stock 45.45 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/GMC/Yukon/cup-holders?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-96714f86-36c1-47be-8baf-a0c3eaca1432 2004 GMC Yukon Seat Back Latch "I loved the original design, but with my seat backs, the lip was just a little too short to hold up when hitting bumps. And once I started modifying it, I went a little further and upgraded the design a bit! These are pretty easy to replace, just slide the pin out and get these in place! Needlenose pliers are a must.
For printing, print on the side as oriented in the model. Print at 100% fill and you shouldn't need supports. I printed at 0.2mm layer height with zig zag infill. It is very very strong and should last a long time. For heat tolerance, make sure to use PETG, ABS, or ASA.
When you print yours, print out a spare or two just to have, even a couple to give away! Many of these break due to the terrible OEM design." https://3dcarparts.org/library/2004/GMC/Yukon/seat-back-latch https://r2-upload.3dcarparts.workers.dev/file/parts/96714f86-36c1-47be-8baf-a0c3eaca1432/images/seat-back-latch-1_1777605828784_zpze9w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/GMC/Yukon/seat-back-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-70412bdc-bf05-4211-8277-b5d21ccac5c5 2004 GMC Yukon Rear Window Switch Case "this is switch case for rear window of GMC Yukon 2001-2006
Part number: 800755
Thanks, Enjoy!" https://3dcarparts.org/library/2004/GMC/Yukon/rear-window-switch-case https://r2-upload.3dcarparts.workers.dev/file/parts/70412bdc-bf05-4211-8277-b5d21ccac5c5/images/rear-window-switch-case-1_1767928638382_o24m8e.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2004/GMC/Yukon/rear-window-switch-case?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ff107366-e7a1-40f0-a2d4-c7bf3d6845b0 2022 GMC Yukon Tweeter Adapter Plate "Adapter Plate to fit Hertz C26 OE Tweeter into existing A-Pillar Location
For 2022+ GMC Yukon Denali/Suburban with Bost 14-speaker surround system" https://3dcarparts.org/library/2022/GMC/Yukon/tweeter-adapter-plate https://r2-upload.3dcarparts.workers.dev/file/parts/ff107366-e7a1-40f0-a2d4-c7bf3d6845b0/images/tweeter-adapter-plate-1_1777605921872_atn3c4.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2022/GMC/Yukon/tweeter-adapter-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b4fe16ff-087c-4168-9ede-cf9c8ea252e7 2001 Chevrolet Tahoe Center Console Cubby "Remixed and modified by merging two files, the 03-06 cubby from zulubravo, and the 99-02 blank by snarkysoundguy717. Took a few trial runs but fit the 2001 Tahoe console I had lying around. Printed with fuzzy skin, spray with your desired interior trim paint. Thank you to both who uploaded those great models!
Links to original files:
- https://cults3d.com/en/3d-model/various/99-02-gmt800-center-console-radio-delete
- https://www.thingiverse.com/thing:4259408" https://3dcarparts.org/library/2001/Chevrolet/Tahoe/center-console-cubby https://r2-upload.3dcarparts.workers.dev/file/parts/b4fe16ff-087c-4168-9ede-cf9c8ea252e7/images/center-console-cubby-1_1777605846849_e6n597.jpg in_stock 21.18 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Chevrolet/Tahoe/center-console-cubby?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7d49f529-c7f0-43dd-b1c4-2cc30e7d007a 2002 GMC Yukon Center Console Rear Blank Plate Remixed from the cubby I uploaded before, just a revised version of the blank plate with the key way cut and a little better corner radius. https://3dcarparts.org/library/2002/GMC/Yukon/center-console-rear-blank-plate https://r2-upload.3dcarparts.workers.dev/file/parts/7d49f529-c7f0-43dd-b1c4-2cc30e7d007a/images/center-console-rear-blank-plate-1_1767928587234_laj2dy.jpg in_stock 12.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/GMC/Yukon/center-console-rear-blank-plate?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-642aacde-c988-4257-a771-3b114090ff20 2014 Chevrolet Tahoe Headlamp Bulb Cover Wrench A disk that fits over the tabs on the access port cover on the back of the headlight assembly. Slight twist removes this cover but getting a good grip can be challenging with wrist or finger problems. The disk engages the tabs and provides a fluted rim to assist grip. Fusion 360 and Step files included. https://3dcarparts.org/library/2014/Chevrolet/Tahoe/headlamp-bulb-cover-wrench https://r2-upload.3dcarparts.workers.dev/file/parts/642aacde-c988-4257-a771-3b114090ff20/images/headlamp-bulb-cover-wrench-1_1767928520281_ywqts8.jpg in_stock 21.75 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2014/Chevrolet/Tahoe/headlamp-bulb-cover-wrench?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-56a2bbc4-1323-41ae-a730-0968cc9d1110 2003 Chevrolet Silverado Dash Cubby Remixed from Buras Prints awesome model, I added the SS logo to mimic the factory SS inserts while still allowing for both blanks to mount switches or use a gauge. Also added a version with a GMC logo for the Sierra/Yukon folks. If you need one without logos, please go download the original model this was remixed from! https://3dcarparts.org/library/2003/Chevrolet/Silverado/dash-cubby https://r2-upload.3dcarparts.workers.dev/file/parts/56a2bbc4-1323-41ae-a730-0968cc9d1110/images/dash-cubby-4_1767928481369_wqfyop.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Chevrolet/Silverado/dash-cubby?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c08dc895-bdab-4edc-b695-3b81a082afe7 1998 Jeep Cherokee HVAC Blend Door Main Gear "This is a replacement main gear for the HVAC blend door actuator that tends to crack and break with age. From what I could find, this gear should also work for the following units as well in addition to some Mercedes-Benz models. List Below.
if you are unsure, disassemble your unit and compare with attached photo and gear. It may work for your use case as well.
When servicing take care to note the orientation of the metal shaft in addition to the blue gear to make sure alignment does not get lost. Install with flat side of gear facing up. Be sure to lubricate with a plastic safe lubricant and reassemble!
Print with the flat side to the bed of the printer with maximum infill. Choose suitable filament that can withstand torque and high heat for reliable operation.
BUICK CENTURY 1997-2005
BUICK REGAL 1988-2004
BUICK SOMERSET 1987
CADILLAC ESCALADE 1999-2000
CHEVROLET BERETTA 1987-1990
CHEVROLET C1500 PICKUP 1995-1999
CHEVROLET C1500 SUBURBAN 1995-1997
CHEVROLET C2500 PICKUP 1995-1999
CHEVROLET C2500 SUBURBAN 1995-1999
CHEVROLET C35 1995-2000
CHEVROLET C3500 PICKUP 1995-2002
CHEVROLET CLASSIC 2004-2005
CHEVROLET CORSICA 1987-1989
CHEVROLET CORVETTE 1997-2003
CHEVROLET EXPRESS 1500 2003-2014
CHEVROLET EXPRESS 2500 2003-2015
CHEVROLET EXPRESS 3500 2003-2015
CHEVROLET EXPRESS 4500 2009-2015
CHEVROLET EXPRESS CARGO 2012-2014
CHEVROLET EXPRESS PASAJEROS 2011-2014
CHEVROLET IMPALA 2000-2003
CHEVROLET K1500 PICKUP 1995-1998
CHEVROLET K1500 SUBURBAN 1996-1999
CHEVROLET K2500 PICKUP 1995-2000
CHEVROLET K2500 SUBURBAN 1995-1999
CHEVROLET K3500 PICKUP 1995-2000
CHEVROLET LUMINA 1990-2001
CHEVROLET LUMINA APV 1990-1991
CHEVROLET MALIBU 1998-2003
CHEVROLET MONTE CARLO 1995-2002
CHEVROLET SILVERADO 2500 2000
CHEVROLET SILVERADO 3500 2002
CHEVROLET TAHOE 1995-2000
CHEVROLET VENTURE 1997-2000
GMC C1500 PICKUP 1995-1998
GMC C1500 SUBURBAN 1995-1999
GMC C2500 PICKUP 1995-2000
GMC C2500 SUBURBAN 1995-1999
GMC C3500 PICKUP 1995-2002
GMC K1500 PICKUP 1995-1999
GMC K1500 SUBURBAN 1995-1999
GMC K2500 PICKUP 1995-2000
GMC K2500 SUBURBAN 1995-1999
GMC K3500 1995-2000
GMC SAVANA 1500 2003-2013
GMC SAVANA 2500 2003-2014
GMC SAVANA 3500 2003-2014
GMC SAVANA 4500 2009-2013
GMC SIERRA 3500 2002
GMC YUKON 1995-1999
JEEP CHEROKEE 1998-2001
JEEP LIBERTY 2002-2005
JEEP WRANGLER 2000-2005
OLDSMOBILE ALERO 1999-2004
OLDSMOBILE CUTLASS 1998-1999
OLDSMOBILE CUTLASS SUPREME 1989-1991
OLDSMOBILE INTRIGUE 1998-2001
OLDSMOBILE SILHOUETTE 1990-2000
PONTIAC GRAND AM 1999-2005
PONTIAC GRAND PRIX 1988-2003
PONTIAC MONTANA 1999-2000
PONTIAC TRANS SPORT 1991-1998" https://3dcarparts.org/library/1998/Jeep/Cherokee/hvac-blend-door-main-gear https://r2-upload.3dcarparts.workers.dev/file/parts/c08dc895-bdab-4edc-b695-3b81a082afe7/images/hvac-blend-door-main-gear-1_1777605869637_8ro06d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Jeep/Cherokee/hvac-blend-door-main-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a0ff7650-043f-4a93-807b-47f833f1e939 2004 GMC Yukon Tailgate Latch Cover "I have the STL file reach out if you need it or have suggested changes.
I printed with PETG, 30% infill, and tree supports." https://3dcarparts.org/library/2004/GMC/Yukon/tailgate-latch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/a0ff7650-043f-4a93-807b-47f833f1e939/images/tailgate-latch-cover-1_1767928376253_o6yw8y.jpg in_stock 21.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/GMC/Yukon/tailgate-latch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-feec6481-8cb1-45a5-86f3-48b925d38560 2001 Chevrolet Yukon XL Spark Plug Boot Removal Tool "I made this tool for my 01 Yukon XL 1500. The spark plugs boots have a heat shield on them and if those boots have been attached to the spark plugs for a few years they can be a pain to remove. This tool works on all the plugs even the ones with minimal space in the back. I printed in PLA and didn't have an issue.
Instructions: Once printed out, slide the open end over the plug wire and expand it enough to slip over the heat shield until the lip settles into the groove. Then take a pair of pliers (I found needle nose vice grips work well for constant pressure so they don't slide off) and something to pry/leverage the boot off.
I plan to make a video of this sometime. I sold my Yukon so I don't have a demo vehicle :(. I plan to get another later on though. I will also be adding this to my Shapeways so anyone without a printer can still get one. https://www.shapeways.com/product/WED3B5S4N/gm-chevy-spark-plug-boot-removal-tool" https://3dcarparts.org/library/2001/Chevrolet/Yukon%20XL/spark-plug-boot-removal-tool https://r2-upload.3dcarparts.workers.dev/file/parts/feec6481-8cb1-45a5-86f3-48b925d38560/images/spark-plug-boot-removal-tool-1_1777605830132_wpfgcx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2001/Chevrolet/Yukon%20XL/spark-plug-boot-removal-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6bd38546-1875-4f0a-86a1-c76c0f456410 2000 Chevrolet Astro Rear Window Mounting Button/Insert Rear Window mounting insert for the 1995–2005 series of Chevy Astro/GMC Safari vans with hinging rear windows. https://3dcarparts.org/library/2000/Chevrolet/Astro/rear-window-mounting-buttoninsert https://r2-upload.3dcarparts.workers.dev/file/parts/6bd38546-1875-4f0a-86a1-c76c0f456410/images/rear-window-mounting-buttoninsert-1_1767926709429_ttruj6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Chevrolet/Astro/rear-window-mounting-buttoninsert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3a3140e7-ab8b-4f19-8389-b8eb91d8e2e3 1990 Chevrolet Astro Rear Window Hold Open Replacement Link This is a replacement link for the rear awning type window latch on a 1990 Chevy Astro Van. https://3dcarparts.org/library/1990/Chevrolet/Astro/rear-window-hold-open-replacement-link https://r2-upload.3dcarparts.workers.dev/file/parts/3a3140e7-ab8b-4f19-8389-b8eb91d8e2e3/images/rear-window-hold-open-replacement-link-1_1767926686749_cj7iwe.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Chevrolet/Astro/rear-window-hold-open-replacement-link?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1b3ec74c-b71c-4a4d-a41d-8e8372c3b296 2003 Ford Crown Victoria Ashtray Repair Kit "Repair kit for ashtray in crown victoria's or grand marquis. Print in ABS, Hinge part has two files because the larger part requires 3D printing enclosure to print properly and aligns hinge with inside face lip. Grind broken pulltab tips untill pulltab repair part bottom is flush with faceplate.
https://rumble.com/v3b8kli-vso474-c00-crown-victoria-ashtray-repair.html
https://www.zenlabcreations.com/home" https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/ashtray-repair-kit https://r2-upload.3dcarparts.workers.dev/file/parts/1b3ec74c-b71c-4a4d-a41d-8e8372c3b296/images/ashtray-repair-kit-1_1777605912375_vjm6nr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/ashtray-repair-kit?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf19c0a2-4df7-4edd-85cc-304a5af7dbcd 2000 Ford Crown Victoria Raspberry Pi Touchscreen Mount "Raspberry Pi 7"" Touchscreen mount for my 2000 Ford Crown Victoria automobile. Also accommodates a Raspberry Pi 3 or 4, and a 10amp DC-DC buck converter (listed below).
I designed the mount to install without any modifications to the dash. I am using it to complete an OpenAuto Pro (Android Auto) installation in my vehicle.
Here is a youtube video of the design and implementation of the mount:
https://www.youtube.com/watch?v=Aqlr-1AQtoM
Raspberry Pi Touchscreen - https://www.amazon.com/dp/B0153R2A9I/
Raspberry Pi 4 - https://www.amazon.com/dp/B07TD42S27/
12V - 5V 10amp buck converter - https://www.amazon.com/dp/B01M03288J/" https://3dcarparts.org/library/2000/Ford/Crown%20Victoria/raspberry-pi-touchscreen-mount https://r2-upload.3dcarparts.workers.dev/file/parts/cf19c0a2-4df7-4edd-85cc-304a5af7dbcd/images/raspberry-pi-touchscreen-mount-1_1777605859826_9cpkzj.jpg in_stock 19.60 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Ford/Crown%20Victoria/raspberry-pi-touchscreen-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ee0da591-ac18-4b8e-bbeb-32f88e80226a 2004 Ford Crown Victoria License Plate Light Camera Fixture "Crown Victoria license plate light fixture modified for LED bulbs and a large backup camera placement. For cameras that use 4 pin micro connector only Use #13 and #103 o-rings in assembly for waterproofing. LED light bulbs from amazon link below. print custom screws for led bulbs. Best material ASA for fixture and screws, TPEflex for gasket. False raft version for better bed adhesion to get a good surface versus using real raft setting.
https://www.zenlabcreations.com/product-page/13n775-mod-crown-victoria-license-plate-led-light-fixture-for-backup-camera
https://www.amazon.com/dp/B09PRP7CH6?ref=ppx_yo2ov_dt_b_product_details&th=1" https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/license-plate-light-camera-fixture https://r2-upload.3dcarparts.workers.dev/file/parts/ee0da591-ac18-4b8e-bbeb-32f88e80226a/images/license-plate-light-camera-fixture-1_1767926524156_bzd0uy.jpg in_stock 16.01 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/license-plate-light-camera-fixture?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dce36b17-ca26-4fcb-af1f-2994e68ad94b 2004 Ford Crown Victoria Door Switch "This is a remix of the ""Crown Victoria door switch fix"" models by beniscooking. They've been thickened and the shape and size of the clip portion has been adjusted.
I recommend printing in PETG for strength and temperature resistance. For a more permanent fix, you can glue them in to place. SUPPORTS ARE REQUIRED." https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/door-switch https://r2-upload.3dcarparts.workers.dev/file/parts/dce36b17-ca26-4fcb-af1f-2994e68ad94b/images/door-switch-1_1767926511143_ktsuob.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/door-switch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d9ac8e2-f3f3-4c22-a632-04d0fd406fb0 1990 Ford LTD Crown Victoria Rear Window Bottom Trim Clips "I needed replacement trim clips for a project car I was working on. The vehicle requires 8 total clips, and all but 3 were missing. My final print was in PETG, so they came out a little rough visually, but they clipped into place and have been holding well.
Photos show one of the remaining OEM trim clips next to the one printed in PETG.
To print, I used the automatic supports in Prusa Slicer. I oriented the print with the slot facing down, and the clip on its edge (same as the Thingiverse model preview, but with the slot pointed down instead of up)." https://3dcarparts.org/library/1990/Ford/LTD%20Crown%20Victoria/rear-window-bottom-trim-clips https://r2-upload.3dcarparts.workers.dev/file/parts/4d9ac8e2-f3f3-4c22-a632-04d0fd406fb0/images/rear-window-bottom-trim-clips-1_1767926464729_a9gpgz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Ford/LTD%20Crown%20Victoria/rear-window-bottom-trim-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7107f2dd-8518-4f2a-8f3d-a98df6ded3b3 2003 Ford Crown Victoria LED License Plate Light Adapter "Every single Crown Vic I've seen had bad license plate light. Water damages the light and/or the connector, lens broken or glue didn't hold the two parts together any more, so I made this adapter for an LED conversion. The light has about 3"" of cable, so water won't damage the connector any more.
I paid $8 for the set of two LED license plate lights from Temu. The lights are for Nissan Qashqai J11, Primera P12, Pathfinder R51, X-Trail T31, Juke F15, Micra Versa, Infiniti Q50.
Printed from PETG with 100% infill." https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/led-license-plate-light-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/7107f2dd-8518-4f2a-8f3d-a98df6ded3b3/images/led-license-plate-light-adapter-1_1777605853093_b2xrmo.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/led-license-plate-light-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b86d85ca-4266-4e51-893b-c43805b640b0 2000 Ford Crown Victoria Rear Main Seal Installation Tool "Printed in ASA, scale 100.4 due to material shrinkage with 99% infill. You want a hard solid material for press fitting part. This is to install a rear main ford crankshaft seal for a Ford modular V8 motor. Pressed to a depth of 0.256"". Design is imperial inches." https://3dcarparts.org/library/2000/Ford/Crown%20Victoria/rear-main-seal-installation-tool https://r2-upload.3dcarparts.workers.dev/file/parts/b86d85ca-4266-4e51-893b-c43805b640b0/images/rear-main-seal-installation-tool-1_1777605833304_6mpmh6.jpg in_stock 25.17 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2000/Ford/Crown%20Victoria/rear-main-seal-installation-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-befba4db-ab64-4da9-a0ae-2b74e8645b7d 2004 Ford Crown Victoria License Plate Light Backup Camera Mount "Update 5/10/23: the gasket fits perfectly. Light transmission is good with the ""solid"" version printed in clear PETG. Additional photos of that version added.
Update 5/4/23: added a model for a gasket. Print from TPU. I initially just cut one from gasket rubber I had on hand, but it's red. The OEM gasket might fit, but is usually firmly stuck to the OEM light, whether by intent or time, so here's a new one! It's literally an extrusion of the top mounting surface of the mount with the inner opening offset 0.5mm for clearance. That should be enough, but I will print one up and check soon.
I've also printed up the rev 4.5 in clear, and it looks decent. I'll have to install and see how good or bad the light transmission is.
Update 5/3/23: Added Rev 4.5, and 4.5 Clear. I imported the model into Fusion 360 and extended some surfaces to avoid awkward small insets and weird angles, and added a bunch of fillets for a cleaner appearance. Removed some extraneous surfaces that were artifacts of TinkerCAD's additive process. The ""Clear"" version features fully enclosed light boxes, intended to be printed in transparent material. I have not printed these yet, so please let me know if anything blows up.
A reversing camera mount for Ford Crown Victorias that replaces the license plate light. It should fit 1998-2012 Crown Vics and Mercury Grand Marquis, possibly Town Cars - I have not looked at the license plate light on those.
It was designed to fit an Atoto reversing camera, but will likely fit a variety of Chinese-made cameras. Mounting holes may differ, of course, and the angle may not be exactly correct depending on the field of view angle of your camera. The large hole on top is for the big honking RCA plug my camera came with to pass through. Many cameras have a much smaller pug that connects to a harness with the standard RCA plug, but this one didn't, unfortunately. Please feel free to modify as necessary for your camera - I'd love to hear about someone else getting use out of this.
The factory license plate light twists right in. I added a second socket and wiring spliced in for even lighting, but the single light is most likely adequate for legality. this was sliced with PrusaSlicer using an AnkerMake M5 profile @ 15% infill, and printed on an AnkerMake M5 using default settings, taking about an hour to print.
This is my first original design, and I'm really happy with how it came out! TinkerCAD is a treat to use for simple designs like this." https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/license-plate-light-backup-camera-mount https://r2-upload.3dcarparts.workers.dev/file/parts/befba4db-ab64-4da9-a0ae-2b74e8645b7d/images/license-plate-light-backup-camera-mount-1_1767926351362_smwgys.jpg in_stock 12.54 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/license-plate-light-backup-camera-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-676844b8-8642-4dc3-8d0c-12dc26d0aff9 2003 Ford Crown Victoria 12v Mount "Police interceptors often come with the center dash ripped out, leaving no 12v adaptor to fill up your tires, etc. This print compresses into the space and is a mount for this cluster: https://www.amazon.com/dp/B0834MTG3X
You'll have to drill into the lip under the dash to make this work. Fasten the mount with sheet metal screws. Fasten the cluster to the mount with m3 socket head screws." https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/12v-mount https://r2-upload.3dcarparts.workers.dev/file/parts/676844b8-8642-4dc3-8d0c-12dc26d0aff9/images/12v-mount-1_1767926341049_ukuoat.jpg in_stock 11.29 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/12v-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8f90c2b7-2717-42a7-8fdf-8a3ef902c61b 2003 Ford Crown Victoria Bumper Trim This blocks off one of the grills in the front bumper. Most Vics had them from the factory but they fall off or break. They're the same just flip it over. I'm planning on attaching a cone to it and using it as a brake cooling duct. https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/bumper-trim https://r2-upload.3dcarparts.workers.dev/file/parts/8f90c2b7-2717-42a7-8fdf-8a3ef902c61b/images/bumper-trim-1_1767926329384_souyph.jpg in_stock 7.25 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/bumper-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f196ffad-b158-42db-b068-e4fa7d20ca61 2003 Ford Crown Victoria Sun Visor Clips "The original failed at the glue line after a year in the car - figured I could print it sitting flat in a single piece without too much support material. The hook needs support in this orientation so you can't just do buildplate only supports.
Print in PETG with fairly high cubic or gyroid infill to give it a combination of flex and stiffness to clip in. PLA will sag on a summer day.
I got a much nicer surface finish when I printed it laying flat instead of gluing together two halves." https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/sun-visor-clips https://r2-upload.3dcarparts.workers.dev/file/parts/f196ffad-b158-42db-b068-e4fa7d20ca61/images/sun-visor-clips-1_1767926313078_wruy0r.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Ford/Crown%20Victoria/sun-visor-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6747a852-3d9c-468e-8832-a8a3ed36b5cb 2004 Ford Crown Victoria Spotlight Door Notch Trim "For printer settings see below.
I printed this part of PETG, in the position laid flat. It fits exactly like the original. It's pretty elastic, however the thickness of the material is 1mm. Take your time and your small tools to remove supports, file all the surfaces carefully. I'd recommend to paint it to prevent from sunlight, and to hide the layers." https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/spotlight-door-notch-trim https://r2-upload.3dcarparts.workers.dev/file/parts/6747a852-3d9c-468e-8832-a8a3ed36b5cb/images/spotlight-door-notch-trim-1_1767926291323_ehyiey.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Ford/Crown%20Victoria/spotlight-door-notch-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0cefe8e9-0cfb-4cab-a8d2-35e6bd92daa9 2017 Mitsubishi Pajero Armrest Latch "2017 Mitsubishi Pajero armrest latch
You need a hot wire to make a hole for the screws. Also, you might need to press on the latch to lock in the arm rest. I used PLA and it works great for me. Hope you like it :)
Note: v2 latch is more sturdy
Print requirements:
- 20% infill should be enough
- Enable support
the rest of the settings is up to you" https://3dcarparts.org/library/2017/Mitsubishi/Pajero/armrest-latch https://r2-upload.3dcarparts.workers.dev/file/parts/0cefe8e9-0cfb-4cab-a8d2-35e6bd92daa9/images/armrest-latch-1_1767842739347_xn6irm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Mitsubishi/Pajero/armrest-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-901873a4-3c53-45c3-922e-ba4bc0034418 2004 Mitsubishi Pajero TR4 2Din Frame "Frame/molding to adapt a 7"" multimedia center using the original panel.
I attached it with 3M double-sided tape." https://3dcarparts.org/library/2004/Mitsubishi/Pajero%20TR4/2din-frame https://r2-upload.3dcarparts.workers.dev/file/parts/901873a4-3c53-45c3-922e-ba4bc0034418/images/2din-frame-1_1767842714980_rbjyzh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Mitsubishi/Pajero%20TR4/2din-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-072d5f1f-f1f3-4403-a42c-296bbf29b25d 2009 Mitsubishi Pajero 12V Socket Additional 12V socket holder for Pajero front console. (Gen 4 Pajero) https://3dcarparts.org/library/2009/Mitsubishi/Pajero/12v-socket https://r2-upload.3dcarparts.workers.dev/file/parts/072d5f1f-f1f3-4403-a42c-296bbf29b25d/images/12v-socket-1_1767842597201_4egrxq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2009/Mitsubishi/Pajero/12v-socket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f8fd5bc4-1b8d-4201-96b4-97db512ebfa5 1991 Mitsubishi Montero Cargo Cover Hook This hook screws into the plastic panels in the cargo area of the Gen1 to secure the pull out cargo cover. You will need to print two hooks. Print with a strong filament that can handle high heat and UV. https://3dcarparts.org/library/1991/Mitsubishi/Montero/cargo-cover-hook https://r2-upload.3dcarparts.workers.dev/file/parts/f8fd5bc4-1b8d-4201-96b4-97db512ebfa5/images/cargo-cover-hook-1_1767842520399_3p3bx0.jpg in_stock 7.92 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Mitsubishi/Montero/cargo-cover-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8cfe01a6-d759-412e-ab96-d1da888136ff 2003 Mitsubishi Montero License Plate Light Camera Mount "Didn't see any good options for printing a back up camera mount for a 3rd gen Montero/Pajero so I made one. hope this helps some people!
File includes housing and lens for a clear material." https://3dcarparts.org/library/2003/Mitsubishi/Montero/license-plate-light-camera-mount https://r2-upload.3dcarparts.workers.dev/file/parts/8cfe01a6-d759-412e-ab96-d1da888136ff/images/license-plate-light-camera-mount-1_1767842427743_jd621b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Mitsubishi/Montero/license-plate-light-camera-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4243305c-cb57-44c1-95db-87f22c97b4c9 2005 Mitsubishi Pajero Seat Folding Clip "Seat folding clip replacement for Mitsubishi Pajero Montero.
The model is not an exact copy, but made for easier printing on a printer.
part number MR655388
I used ABS.
Nozzle: 0.25
Height: layer 0.2
Support: Tree. Angle 60
Maybe someone can print it without supports and with a bigger nozzle, but I haven't tested it." https://3dcarparts.org/library/2005/Mitsubishi/Pajero/seat-folding-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4243305c-cb57-44c1-95db-87f22c97b4c9/images/seat-folding-clip-1_1767842412798_ofoo92.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Mitsubishi/Pajero/seat-folding-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5ae4c79c-5e50-45be-81da-36334c8cd303 2007 Mitsubishi Pajero AC Lines Holder "If you found a white plastic part fist-size around the leg area in your Pajero then it is a holder for the AC lines that is under the dash, on the right side of the steering rack / above your right knee.
The rest of the broken part will still be there in between the metal AC lines held with a screw.
To fix it:
1) Unscrew the single screw with the small broken plastic part that stayed there
2) super glue the broken part to the bigger part that you found on the floor
3) glue this 3Dprinted insert inside the groove where screw goes
Wait until glue dries and screw in the fixed part back in it's place.
Photo shows it after repair.
Print lying on the ""back"" / flat." https://3dcarparts.org/library/2007/Mitsubishi/Pajero/ac-lines-holder https://r2-upload.3dcarparts.workers.dev/file/parts/5ae4c79c-5e50-45be-81da-36334c8cd303/images/ac-lines-holder-1_1767842397387_02uu2m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Mitsubishi/Pajero/ac-lines-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b75920d2-31c5-49a7-9af4-956184ed7129 1999 Mitsubishi Pajero Clutch Alignment Tool Clutch plate centering tool for Mitsubishi 4M40 (2.8L) engine. https://3dcarparts.org/library/1999/Mitsubishi/Pajero/clutch-alignment-tool https://r2-upload.3dcarparts.workers.dev/file/parts/b75920d2-31c5-49a7-9af4-956184ed7129/images/clutch-alignment-tool-1_1767842372920_5hrgdj.jpg in_stock 10.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1999/Mitsubishi/Pajero/clutch-alignment-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b48ccb53-5b9a-4d2a-b4dd-d6d518478737 2004 Mitsubishi Pajero/Montero Sport Fog Light Grille Plug "Grille plug in the bumper without fog lights for mitsubishi pajero/montero sport 1999-2004. MR 496689 MR 496690.
Left and right are no different.
Print with supports" https://3dcarparts.org/library/2004/Mitsubishi/Pajero%2FMontero%20Sport/fog-light-grille-plug https://r2-upload.3dcarparts.workers.dev/file/parts/b48ccb53-5b9a-4d2a-b4dd-d6d518478737/images/fog-light-grille-plug-1_1767567312786_c755vv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Mitsubishi/Pajero%2FMontero%20Sport/fog-light-grille-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-88072128-1e1e-4beb-91cf-092064feb75f 2005 Mitsubichi Pajero iO Windshield Wiper Motor to Body Mounting Gasket The foam gasket on my windshield wiper cover plate had denigrated allowing engine fumes into the cabin. Here is a 3D file for a replacement gasket. https://3dcarparts.org/library/2005/Mitsubichi/Pajero%20iO/2005-mitsubichi-pajero-io-windshield-wiper-motor-to-body-mounting-gasket https://r2-upload.3dcarparts.workers.dev/file/parts/88072128-1e1e-4beb-91cf-092064feb75f/images/windshield-wiper-motor-to-body-mounting-gasket-1_1767562542335_j1fjiq.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mitsubichi/Pajero%20iO/2005-mitsubichi-pajero-io-windshield-wiper-motor-to-body-mounting-gasket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-27ac7f0b-8f40-4771-8050-66cda7268b3c 2004 Mitsubishi Pajero Snorkel Head I created a snorkel head for my Pajero, it'll need scaled to the size of your snorkel pipe. https://3dcarparts.org/library/2004/Mitsubishi/Pajero/snorkel-head https://r2-upload.3dcarparts.workers.dev/file/parts/27ac7f0b-8f40-4771-8050-66cda7268b3c/images/snorkel-head-1_1767562232804_34uy5d.jpg in_stock 83.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Mitsubishi/Pajero/snorkel-head?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1b81dfb9-72e7-46d3-821e-d56276d8da7b 2012 Mitsubishi Pajero Bumper Mounting Bracket "Bumper in Pajero IV is held by 4 plastic ears on the bottom of the central part.
It is easy to break it during parking etc.
Designed replacement lips fits the factory mounts to the metal bumper. On the front side plastic bumper slides in to the grove. Print small 3-4mm holed and use rivets to fix it.
Quick fix / plug and play. Use PETG or other strong material." https://3dcarparts.org/library/2012/Mitsubishi/Pajero/bumper-mounting-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/1b81dfb9-72e7-46d3-821e-d56276d8da7b/images/bumper-mounting-bracket-1_1767562133649_ohcuhy.jpg in_stock 7.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Mitsubishi/Pajero/bumper-mounting-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-600e734c-d28e-4639-8eaf-df08488881a7 2000 Mitsubishi Pajero iO Trunk Hook Replacement for trunk hook found on Pinin; Montero; IO; TR4; Shogun; H77W models https://3dcarparts.org/library/2000/Mitsubishi/Pajero%20iO/trunk-hook https://r2-upload.3dcarparts.workers.dev/file/parts/600e734c-d28e-4639-8eaf-df08488881a7/images/trunk-hook-1_1767562003703_qbv5hy.jpg in_stock 12.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Mitsubishi/Pajero%20iO/trunk-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d3026352-7ec8-45eb-b22c-721e36bf8611 2000 Mitsubishi Pajero iO Auxiliary Light Mounting Bracket Spacer – Front Bumper Spacer for mounting additional headlights in factory holes of bumper reinforcement for Mitsubishi Pajero IO or Pinin https://3dcarparts.org/library/2000/Mitsubishi/Pajero%20iO/auxiliary-light-mounting-bracket-spacer-front-bumper https://r2-upload.3dcarparts.workers.dev/file/parts/d3026352-7ec8-45eb-b22c-721e36bf8611/images/auxiliary-light-mounting-bracket-spacer-front-bumper-1_1767561957326_36y15m.jpg in_stock 10.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Mitsubishi/Pajero%20iO/auxiliary-light-mounting-bracket-spacer-front-bumper?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-684bdf92-ef35-42da-ad69-2422a3f387ba 2024 Tesla Model 3 Charger Lock "This is a charger lock for a Tesla. I made this for a buddy of mine so I am not sure which Tesla models it will fit but I believe he has a model 3. This is just a beefed up version of some others I have found on here. The ones I had found were just a bit too flimsy so I wanted to make it stronger and more durable.
I have included 2 variations, one with a lock logo and one without. I was going to add one with a Tesla logo but wasn't sure if this would be copyright infringement." https://3dcarparts.org/library/2024/Tesla/Model%203/charger-lock https://r2-upload.3dcarparts.workers.dev/file/parts/684bdf92-ef35-42da-ad69-2422a3f387ba/images/charger-lock-1_1767466066567_2fnfo2.jpg in_stock 15.67 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2024/Tesla/Model%203/charger-lock?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-31021d4b-5dc7-454f-b281-b1de3106366d 2020 Tesla Model 3 Charger Adapter Holder "Utilize one of the plastic push pin clips in the trunk to mount this holder for the charging adapter.
I printed in ABS at 20% infill, no supports necessary.
How to install: https://youtu.be/SD9FAFNJass
Newer Model 3s may not have the push pin, but you can still install in that location, details here: https://youtu.be/WfFdlGZh1fw" https://3dcarparts.org/library/2020/Tesla/Model%203/charger-adapter-holder https://r2-upload.3dcarparts.workers.dev/file/parts/31021d4b-5dc7-454f-b281-b1de3106366d/images/charger-adapter-holder-1_1767466045210_kcl4em.jpg in_stock 14.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2020/Tesla/Model%203/charger-adapter-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-adcead97-eb47-43ef-ae91-a59b2ee08a3e 2020 Tesla Model 3 Trunk Fence "This is a trunk fence tower for the Tesla Model 3. Using two of the object and about 12 feet of bungee cord, it can be used to keep things from sliding around the trunk. You could also use loose bungees with hooks.
(Be careful; PLA is not strong and can stretch or break, and bungees can carry a lot of energy.)
They can be positioned anywhere along the sides of the sub-trunk lid to accomodate different loads.
There are alternatives, such as https://smile.amazon.com/dp/B06VVPWSXM but they can fuzz up your carpet.
20241027: Added STEP file as requested by @rrsn who wants to remix." https://3dcarparts.org/library/2020/Tesla/Model%203/trunk-fence https://r2-upload.3dcarparts.workers.dev/file/parts/adcead97-eb47-43ef-ae91-a59b2ee08a3e/images/trunk-fence-1_1767466013611_05zar9.jpg in_stock 23.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Tesla/Model%203/trunk-fence?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cc639870-5297-41c6-914c-0aaed5061659 2013 Tesla Model S Mobile Charger Mounting Bracket "A simple way to reduce strain on the Tesla Model S mobile charger cord while plugged into an outlet.
Because the 3D printer I have access to isn't large enough to print the bracket as one piece, I designed a top and bottom section. Mount the top bracket to a wall first and then use the mobile charger brick to determine spacing to the bottom bracket." https://3dcarparts.org/library/2013/Tesla/Model%20S/mobile-charger-mounting-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/cc639870-5297-41c6-914c-0aaed5061659/images/mobile-charger-mounting-bracket-1_1767465995005_bjxenp.jpg in_stock 13.81 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2013/Tesla/Model%20S/mobile-charger-mounting-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c3823504-d0e6-49a9-946d-496127e1c240 2017 Tesla Model S Glove Compartment Shelf "This is a shelf for the glove compartment of a Tesla Model S to help keep things organized. It is wide enough to allow space for the charging adapter at the end. It basically allows you to keep sunglasses and other items away from paperwork and placards. Constructive suggestions for improvement are welcome.
Note: I have learned that the original design developed a sag over time. I have made some changes which I hope will minimize that problem. The new model was uploaded on 11/10/17." https://3dcarparts.org/library/2017/Tesla/Model%20S/glove-compartment-shelf https://r2-upload.3dcarparts.workers.dev/file/parts/c3823504-d0e6-49a9-946d-496127e1c240/images/glove-compartment-shelf-1_1767465975426_gp8l19.jpg in_stock 26.66 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Tesla/Model%20S/glove-compartment-shelf?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2965b6aa-6e86-47c9-945a-2407b80e6622 2022 Tesla Model Y Floor Vent Grate Guard "Under the seats there are HVAC vents that are just begging for goldfish and jellybeans to get tossed into them, never to be seen again. Print these and place them over the vents to retain airflow but not the ability to lose small snacks in them. They should friction fit ok, use 1/4"" 3M VHB tape on the edges if you want a more secure attachment." https://3dcarparts.org/library/2022/Tesla/Model%20Y/floor-vent-grate-guard https://r2-upload.3dcarparts.workers.dev/file/parts/2965b6aa-6e86-47c9-945a-2407b80e6622/images/floor-vent-grate-guard-1_1767465957461_9jhabf.jpg in_stock 11.81 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Tesla/Model%20Y/floor-vent-grate-guard?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4124e0fc-a72d-4424-b2b5-552b86b15bf5 2020 Tesla Model 3 Center Console Trash and Storage Bin "A remix on jonco223's design - I have revised the SolidWorks modeling technique to make customizing a bit easier using features like shelling.
The base design is the same, but with slightly thinner walls for quicker printing. When printed from ABS the wall thickness should provide plenty of rigidity. I was able to lengthen the tray slightly after test fitting the original design in the car.
My work-in-progress iteration moves the sunglasses area to the back of the tray, and opens the front into a second bin for trash or throw-in storage. I wouldn't recommend you keep a banana peel in here, but for small receipts, food wrappers, etc, it should work well. The trash bin has a cutout for the console LED, which helpfully lights it up.
I may try flocked contact paper to better blend in with the center console, but this is intended to be covered by the lid when not in use." https://3dcarparts.org/library/2020/Tesla/Model%203/center-console-trash-and-storage-bin https://r2-upload.3dcarparts.workers.dev/file/parts/4124e0fc-a72d-4424-b2b5-552b86b15bf5/images/center-console-trash-and-storage-bin-1_1767465929919_luupmm.jpg in_stock 21.33 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Tesla/Model%203/center-console-trash-and-storage-bin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9a21fa6e-6387-42ad-b2f7-fbf7b90bc539 2022 Tesla Model Y Rigid Hatch Stops "After picking up my Model Y I noticed that going over bumps or uneven roads there was a significant ""boominess"" in the cabin that created a low frequency, infrasonic sound that was quite irritating.
After some research, I realized this problem is systemic to a lot of Model S and Model Y models because of slight movement of the rear hatch.
After calibrating my rubber hatch stops with the ""envelope trick"" (https://www.youtube.com/watch?v=Z4fYt06sfN0), it didn't remove the issue completely.
There was some discussion on Tesla Motor Club forums about making the two hatch stops more rigid to prevent any flex.
Therefore I created these slip-on rigid hatch stops. They are a tight fit (I recommend printing with a 0.4mm nozzle)- if you adjust the size, you'll probably only want to do it by 0.5%
There are several sizes depending on the depth of your rubber stop. I have marked the measurements of various STLs in 0.5mm increments so you can see what size fits best. Either sides of my vehicle's hatch stops were not equal in depth.
Also attached is a parametric Fusion 360 file if you'd like to make subtle adjustments in any parameters.
I haven't done a spectrum analysis with my phone yet, but I do feel that it has improved.
Original Tinkercad is available here:
https://www.tinkercad.com/things/jjZ1nsBbhmq
UPDATE Jan 13/2022:
If you are experiencing still further booming issues and would like a different approach, also please see this modification here https://teslamotorsclub.com/tmc/posts/6314645/" https://3dcarparts.org/library/2022/Tesla/Model%20Y/rigid-hatch-stops https://r2-upload.3dcarparts.workers.dev/file/parts/9a21fa6e-6387-42ad-b2f7-fbf7b90bc539/images/rigid-hatch-stops-1_1767465873011_fpu6y1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2022/Tesla/Model%20Y/rigid-hatch-stops?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c8350182-c768-4f35-992c-859141805c09 2023 Tesla Model 3 Washer Fluid Funnel Funnel to fill windshield washer fluid from the Tesla https://3dcarparts.org/library/2023/Tesla/Model%203/washer-fluid-funnel https://r2-upload.3dcarparts.workers.dev/file/parts/c8350182-c768-4f35-992c-859141805c09/images/washer-fluid-funnel-1_1767465846922_14mj4x.jpg in_stock 12.94 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2023/Tesla/Model%203/washer-fluid-funnel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3126aa96-45d1-43c0-a326-7071933d2f11 2021 Tesla Model 3 Center Console Tray I Remixed this design and to make it a bit longer as well as remover the dividers. Fits very nicely in the center console and can slide back so you can still access the storage underneath. https://3dcarparts.org/library/2021/Tesla/Model%203/center-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/3126aa96-45d1-43c0-a326-7071933d2f11/images/center-console-tray-1_1767465825572_mo5pn6.jpg in_stock 23.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2021/Tesla/Model%203/center-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3ebb6580-6ed1-4024-acc8-97870142eb47 2020 Tesla Model 3 Center Console Tray "Much credit to jonco223 for his original. I added ridges to the bottom to make it easier to pick things up, a brim to support it at the back edges so it's not just friction-fit, and finger grooves in the form of a Model 3 logo to help lift it out.
You'll also see in the finished object photos that I flocked it for a velvety surface. There's some technique involved, and I wasn't perfectly successful, but further attempts should be better.
Hatchbox PLA on a modified Printrbot Simple Metal; black flocking glue and navy flocking powder by Donjer." https://3dcarparts.org/library/2020/Tesla/Model%203/center-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/3ebb6580-6ed1-4024-acc8-97870142eb47/images/center-console-tray-1_1767465757520_11xkk7.jpg in_stock 27.88 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2020/Tesla/Model%203/center-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e115daeb-7546-442c-8111-284b5bad8280 2017 Tesla Model 3 Cup Holder Liner "This is a cupholder liner for the Tesla Model 3. If printed in a semi-flexible material, like TPU or Ninjaflex, the side blades will bend to firmly hold the inserted item.
(If printed in a non-flexible material, the side blades will break or prevent you from using the thing. Or, they'll securely hold a very weirdly shaped other thing.)
Also, the shape of this may be useful to other modelers, since (after a ludicrous number of attempts) it is a very precise fit for the interior of the cupholder area. If folks are interested and let me know, I'll throw the core dimensions together on a drawing, or in a STEP, or some such.
If you are printing this for yourself, great. If you are considering having this commercially printed, it may be more cost-effective to just order this very [similar commercial product](https://smile.amazon.com/EVANNEX-Holder-Insert-Tesla-Model/dp/B07TYP8GKV/).
I may tweak this to add anti-suction dimples in the bottom, or to adjust the fin geometry, but I want to live with it for a few days before tweaking. I appreciate feedback from users/makers.
And finally, if you've read this far, you may be interested in [my other Tesla (or non-Tesla) designs](https://www.thingiverse.com/lairdb/designs)." https://3dcarparts.org/library/2017/Tesla/Model%203/cup-holder-liner https://r2-upload.3dcarparts.workers.dev/file/parts/e115daeb-7546-442c-8111-284b5bad8280/images/cup-holder-liner-1_1767465737150_b94f87.jpg in_stock 20.16 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Tesla/Model%203/cup-holder-liner?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9adf1819-d6ed-4cf0-bffa-a5d2f5207e89 2008 Hyundai Accent Trunk Retainer Pin Those are the plastic pin you need to hold the inside of the trunk of your accent to the metal. https://3dcarparts.org/library/2008/Hyundai/Accent/trunk-retainer-pin https://r2-upload.3dcarparts.workers.dev/file/parts/9adf1819-d6ed-4cf0-bffa-a5d2f5207e89/images/trunk-retainer-pin-1_1767158733227_bymgmk.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Hyundai/Accent/trunk-retainer-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-56e6226f-2284-4e43-8ece-56a580a488d1 2022 Hyundai Ioniq EV Charger Wall Mount EV charger support for Hyundai home plug charger. Easy to put and remove. https://3dcarparts.org/library/2022/Hyundai/Ioniq/ev-charger-wall-mount https://r2-upload.3dcarparts.workers.dev/file/parts/56e6226f-2284-4e43-8ece-56a580a488d1/images/ev-charger-wall-mount-1_1767158718030_i7o908.jpg in_stock 19.56 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2022/Hyundai/Ioniq/ev-charger-wall-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dd580d44-9d3b-43cc-ba82-182e6fa1eff4 2010 Hyundai Genesis Headlight Washer Nozzle Cap Hyundai Genesis 2010 car headlight washer cap for right side https://3dcarparts.org/library/2010/Hyundai/Genesis/headlight-washer-nozzle-cap https://r2-upload.3dcarparts.workers.dev/file/parts/dd580d44-9d3b-43cc-ba82-182e6fa1eff4/images/headlight-washer-nozzle-cap-1_1767158667405_81k1kc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Hyundai/Genesis/headlight-washer-nozzle-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cced1400-2151-48ab-9ca3-8c4e747cf8c0 2018 Hyundai Sonata Arm Rest Storage Organizer "I designed this for my Hyundai Sonata 2018. This is an organizer that goes under the arm rest, and goes right into the hole and fills it up. The pockets are designed for my car odor sprays, lint roller, facial masks, gloves, and just a general pocket to throw stuff in, I like to be organized. :)
For other cars, I would just take out the bottom mat, if it has one, and measure it, if not just measure the bottom of the hole as most of the time they are slanted and get bigger the higher up the hole gets. Make a box in tinkercad with those dimensions and go crazy with the types of pockets you want to add." https://3dcarparts.org/library/2018/Hyundai/Sonata/arm-rest-storage-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/cced1400-2151-48ab-9ca3-8c4e747cf8c0/images/arm-rest-storage-organizer-1_1767158602556_b9b788.jpg in_stock 30.71 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2018/Hyundai/Sonata/arm-rest-storage-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-84de6808-9898-4e57-8c10-341273ac5821 2004 Hyundai Elantra Headlight Cover Headlight protection cover for 2004 model hyundai elantra (xd2). This model is for led headlight assembly. It is not suitable for the use of halogen lamps. https://3dcarparts.org/library/2004/Hyundai/Elantra/headlight-cover https://r2-upload.3dcarparts.workers.dev/file/parts/84de6808-9898-4e57-8c10-341273ac5821/images/headlight-cover-1_1767158590764_4alnwc.jpg in_stock 8.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2004/Hyundai/Elantra/headlight-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-08a0687f-b6aa-412c-8fcc-d1b8be013ee3 2012 Hyundai i30 Car Mat Clip I designed this clip to keep my car mat in place. It is designed for a Hyundai i30 but may fit other models. https://3dcarparts.org/library/2012/Hyundai/i30/car-mat-clip https://r2-upload.3dcarparts.workers.dev/file/parts/08a0687f-b6aa-412c-8fcc-d1b8be013ee3/images/car-mat-clip-1_1767158554721_gpxjsz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Hyundai/i30/car-mat-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c454109b-ea4b-45eb-a1d8-241ab9a20740 2001 Hyundai Elantra Door Handle A decent replacement for the inside door handles for a 2001 Hyundai Elantra. https://3dcarparts.org/library/2001/Hyundai/Elantra/door-handle https://r2-upload.3dcarparts.workers.dev/file/parts/c454109b-ea4b-45eb-a1d8-241ab9a20740/images/door-handle-1_1767158527520_vv1nh2.jpg in_stock 10.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2001/Hyundai/Elantra/door-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e1d1677e-263d-45dc-be71-377d4823ae34 2012 Hyundai Tuscon Foot Rest Plug "Hyundai foot rest screw cap. This is a screw cap plug for the Hyundai footrest for an IX35/Tuscon. This is for the bottom screw, the top one is a slightly different size. This one may work as a top screw cap. If not, let me know and I'll make a separate cap, alternatively you can tinker your own on TinkerCad (https://www.tinkercad.com/things/d7NeX4jdUG2)
I printed mine in PLA but TPU would be better, the original plugs are rubber." https://3dcarparts.org/library/2012/Hyundai/Tuscon/foot-rest-plug https://r2-upload.3dcarparts.workers.dev/file/parts/e1d1677e-263d-45dc-be71-377d4823ae34/images/foot-rest-plug-1_1767158512737_o25pdf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Hyundai/Tuscon/foot-rest-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f73ac61d-8c9a-4556-a720-4116cf61469c 2010 Hyundai All Models Carpet Mat Clips "Remixed off https://www.thingiverse.com/thing:3113519
To fit Hyundai Car Mat Carpet
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/4qutXTq2jac" https://3dcarparts.org/library/2010/Hyundai/All%20Models/carpet-mat-clips https://r2-upload.3dcarparts.workers.dev/file/parts/f73ac61d-8c9a-4556-a720-4116cf61469c/images/carpet-mat-clips-1_1767158492680_ay2h98.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Hyundai/All%20Models/carpet-mat-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-14e67940-6d92-451a-a2c0-e7f6eebd5373 2008 Hyundai i10 Seat Release Knob A back/rear-seat release knob for Hyundai i10 (2008-2010), might apply to other Hyundai models or other cars too. https://3dcarparts.org/library/2008/Hyundai/i10/seat-release-knob https://r2-upload.3dcarparts.workers.dev/file/parts/14e67940-6d92-451a-a2c0-e7f6eebd5373/images/seat-release-knob-1_1767158471186_re5yyr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Hyundai/i10/seat-release-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3afcc791-0479-4c99-adf1-f479b171ad60 2003 Hyundai Santa Fe Rear Seat Trim Cover "It is a one-to-one drawing of the trim cover on the inner rear side of Hyundai Santa Fe 2001 - 2002 - 2003 - 2004 - 2005 model vehicles.
It is a ready to print drawing." https://3dcarparts.org/library/2003/Hyundai/Santa%20Fe/rear-seat-trim-cover https://r2-upload.3dcarparts.workers.dev/file/parts/3afcc791-0479-4c99-adf1-f479b171ad60/images/rear-seat-trim-cover-1_1767158456458_0zersx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2003/Hyundai/Santa%20Fe/rear-seat-trim-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f28234a5-daad-4881-8325-a89a6045fab6 2018 Hyundai Kona Fusebox Cover "The fusebox cover in the Hyundai Kona can not be used with an OBD reader plugged into the port due to there not being any room left for it due to the design of the original fusebox cover.
This fusebox cover gives room to plug in a low profile OBD reader or a low profile OBD splitter/extension cable. One version has a holder and window for holding a ""Vgate ICar2 ELM327 bluetooth OBD2"" reader." https://3dcarparts.org/library/2018/Hyundai/Kona/fusebox-cover https://r2-upload.3dcarparts.workers.dev/file/parts/f28234a5-daad-4881-8325-a89a6045fab6/images/fusebox-cover-1_1767158401895_ik5wkw.jpg in_stock 21.92 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2018/Hyundai/Kona/fusebox-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-663c1bdc-4dae-486c-bf07-bdec51adb480 2004 Hyundai Tiburon Shelf Clip "The clip that holds the rear shelf (covering the trunk space) in place. I somehow lost mine, so I quickly modeled this in FreeCAD and printed it.
**Update** The original file was a bit narrower than the real piece (I eyeballed all of the dimensions), but I planned on superglueing it in place anyways, so it worked for me. I have since gone back and revised the file to be much closer to true dimensions. It is still a little different from the OEM part, but very close now.
** Use the tiburon_clip_v3.stl file **" https://3dcarparts.org/library/2004/Hyundai/Tiburon/shelf-clip https://r2-upload.3dcarparts.workers.dev/file/parts/663c1bdc-4dae-486c-bf07-bdec51adb480/images/shelf-clip-1_1767158388688_nubj7a.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Hyundai/Tiburon/shelf-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-dbb2da0b-8f2c-4d72-b152-a1425456a03d 2005 Hyundai Tucson Back Window Handle Handle for trunk window, made for my 2005 hyundai tucson. https://3dcarparts.org/library/2005/Hyundai/Tucson/back-window-handle https://r2-upload.3dcarparts.workers.dev/file/parts/dbb2da0b-8f2c-4d72-b152-a1425456a03d/images/back-window-handle-1_1767158349995_u4pbxa.jpg in_stock 7.44 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Hyundai/Tucson/back-window-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-344d3b47-e705-465c-ae62-59453ea002c1 2013 Kia Rio H7 LED Bulb Adapter It's a H7 adapter for LED bulb. It fit for kia rio and other models. I give the file so you can adjust it as you wish. https://3dcarparts.org/library/2013/Kia/Rio/h7-led-bulb-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/344d3b47-e705-465c-ae62-59453ea002c1/images/h7-led-bulb-adapter-1_1767157595428_xtd5i8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2013/Kia/Rio/h7-led-bulb-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-16e4cc15-7d45-4e1f-a2be-91d61a8fd4ec 2004 Kia Spectra Hood Prop Rod Holder Clip Hood holder clip KIA spectra. https://3dcarparts.org/library/2004/Kia/Spectra/hood-prop-rod-holder-clip https://r2-upload.3dcarparts.workers.dev/file/parts/16e4cc15-7d45-4e1f-a2be-91d61a8fd4ec/images/hood-prop-rod-holder-clip-1_1767157530665_xrw3k6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Kia/Spectra/hood-prop-rod-holder-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-06a8dccd-cacf-4fff-bf28-35ebd9e6e212 2022 Kia Forte Rear Window Louvers "These are louvers on the rear window for the kia forte "" i have the 2022"" it fits pretty good." https://3dcarparts.org/library/2022/Kia/Forte/rear-window-louvers https://r2-upload.3dcarparts.workers.dev/file/parts/06a8dccd-cacf-4fff-bf28-35ebd9e6e212/images/rear-window-louvers-1_1767157448109_hzst52.jpg in_stock 17.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2022/Kia/Forte/rear-window-louvers?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-94ae43d7-317b-4cc4-88f6-978e2a17ad6e 2004 Kia Cerato Double Din Car Audio Unit Mount "Mounting L-bars for a 2DIN-sized car stereo unit to Kia Cerato LD/TD (1st generation) also known as Spectra5.
May also fit some other Kia / Hyundai car models.
The mounting is designed for a Chinese Android-based head unit (like one on the picture), which had a ""brim"", slightly larger than the face panel. Sizes of the mounting are chosen for the ""brim"" to stay behind the car console, while the front panel to stick out from it. So it may not fit head units of other sizes.
Be wise choosing a material for printing car parts. PLA does not fit for it and can be easily deformed on a heat.
PETG is good and strong enough.
The frame, which appears on the final photo, is [another thing](https://www.thingiverse.com/thing:3146176)" https://3dcarparts.org/library/2004/Kia/Cerato/double-din-car-audio-unit-mount https://r2-upload.3dcarparts.workers.dev/file/parts/94ae43d7-317b-4cc4-88f6-978e2a17ad6e/images/double-din-car-audio-unit-mount-1_1767157389462_qvkyq6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Kia/Cerato/double-din-car-audio-unit-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40d17c36-ec4e-4fe5-ae6b-7b08435cf0dd 2023 Kia Telluride Purse Hanger "My wife loves her Kia Telluride but has wanted a better means to manger her purse when driving with a passenger in the car. When the passenger seat is occupied, she has no real place to put it.
This thing is a hanger that simply drops into the center cup holders and allows her to hang her purse off the back of the center console.
Her purse stays securely in place while driving, is easily reachable from the driver's seat, and the rear-center cup holders remain fully useable." https://3dcarparts.org/library/2023/Kia/Telluride/purse-hanger https://r2-upload.3dcarparts.workers.dev/file/parts/40d17c36-ec4e-4fe5-ae6b-7b08435cf0dd/images/purse-hanger-1_1767157370905_5fv5y8.jpg in_stock 19.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2023/Kia/Telluride/purse-hanger?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3e1c35d6-f120-4171-b9dc-286a42f14edb 2012 Hyundai Elantra Door Locking Repair Kit It compatible with door locking kia and hyundai 79390-0D000, 79380-0D000, 79490-0D000, 79480-0D000, 79480-2H000, 79490-2H000, 79380-2H000, 79390-2H000 https://3dcarparts.org/library/2012/Hyundai/Elantra/door-locking-repair-kit https://r2-upload.3dcarparts.workers.dev/file/parts/3e1c35d6-f120-4171-b9dc-286a42f14edb/images/door-locking-repair-kit-1_1767157353865_n60mka.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Hyundai/Elantra/door-locking-repair-kit?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a786a733-5af1-4722-bbf8-8979338c93b8 "2021 Kia K5 6.5"" Speaker Adapter" "Speaker adapter to fit 6.5"" speakers into a Kia K5 and therefor most likely the Hyundai Sonata (might work with other Hyundai/Kia models, but no guarantees). Please, if you find that these work with other models, leave a note in the comments.
This one is sized specifically for the Kenwood KFC-651. You should adapt the opening and screw holes according to your speaker's dimensions.
I also included an SVG template for cutting gaskets to fit the front and back of the adapter. I cut them from craft foam sheets and glued them on. There is also a channel in the back to install 1/4"" window sealing tape if you like.
The hole in the base is to run the wire through.
I originally bought a set of speaker adapters from an online stereo parts store. They sucked. They didn't seal to the speaker or car door. They made the woofers sound dead. These are a HUGE improvement. The speakers sound full and the bass is deep and detailed." https://3dcarparts.org/library/2021/Kia/K5/65-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/a786a733-5af1-4722-bbf8-8979338c93b8/images/65-speaker-adapter-1_1767157308432_8sdco1.jpg in_stock 31.32 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2021/Kia/K5/65-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8570cced-9317-411e-b994-8537499fab04 2023 Kia Rio Trunk Lock Gear "A good friend of mine has a broken trunk lock in a Kia Rio X-line car. After disassembling the lock, it was revealed that the gear had broken.
Googling, I realized that this is a common problem with the owners of these cars.
I decided to help a friend and everyone who has this problem." https://3dcarparts.org/library/2023/Kia/Rio/trunk-lock-gear https://r2-upload.3dcarparts.workers.dev/file/parts/8570cced-9317-411e-b994-8537499fab04/images/trunk-lock-gear-1_1767157229791_wmnesv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2023/Kia/Rio/trunk-lock-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7ee5a5ea-6a1b-4da1-bd38-bd85896a91f9 Kia All Models Front Seat Belt Mount Cover "safety belt plug for KIA
Thanks, Enjoy!" https://3dcarparts.org/library?q=Front+Seat+Belt+Mount+Cover https://r2-upload.3dcarparts.workers.dev/file/parts/7ee5a5ea-6a1b-4da1-bd38-bd85896a91f9/images/front-seat-belt-mount-cover-1_1767157180550_0d3omn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library?q=Front+Seat+Belt+Mount+Cover&utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7d7345ad-4c99-44b4-b035-9f13533428a3 2023 Kia Sportage Armrest Organizer "The armrest of my car was large but not useful.
I designed an organizer to put things like glasses, wallets, etc. I hope it works for you.
STL file has support for 45 degree printing. Looks better and stronger than horizontal printing.
2 walls + %5 infill" https://3dcarparts.org/library/2023/Kia/Sportage/armrest-organizer https://r2-upload.3dcarparts.workers.dev/file/parts/7d7345ad-4c99-44b4-b035-9f13533428a3/images/armrest-organizer-1_1767157105347_zwhcte.jpg in_stock 28.65 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2023/Kia/Sportage/armrest-organizer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-756f3057-a68e-45c8-9942-dc522b151f5c 2007 Kia Sportage Sunvisor Stopper "Edit: Updated to V3, small changes to fit better the arm of sun visor. Added additional versions that features a slot for M3 35mm bolt for extra rigidity (Even with PETG, in hot days, the little arm still wraps and bends from the sun visors weight). I now use the slim version with the M3 bolt for structural resistance and seems to work fine.
Minor note: Heat the bolt prior screw it in to avoid layer separation.
A common problem with 2007 Kia Sportage's Sun visor is that the tensioning system fails over time and the Visor falls down, usually at an uncomfortable level.
Because my sun visor would not stay closed, I decided to make to make a clip that keeps it closed.
This is my second version, and should hold better even if temperature warping occurs.
NOTE: Use materials that are UV and Heat resistant (eg. ASA)" https://3dcarparts.org/library/2007/Kia/Sportage/sunvisor-stopper https://r2-upload.3dcarparts.workers.dev/file/parts/756f3057-a68e-45c8-9942-dc522b151f5c/images/sunvisor-stopper-1_1767157043477_ems973.jpg in_stock 16.55 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Kia/Sportage/sunvisor-stopper?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e0b2cfe8-4d07-4fc7-92e6-92d1df4d65ed 2015 Kia Sportage Speaker Mount Bracket "Note that this model is in inches. This is a customized speaker mount adapter for a 2015 Kia Sportage. This is designed to fit 6.75 inch speakers. It was made using https://www.thingiverse.com/thing:2924217. I had to add mount tabs to the outside edges.
Since it is in inches you can either use the ""Barbarian Units"" plugin for Cura or you can scale the model by 2540% in your slicer.
Update 7/8/18: This speaker ring as designed didn't quite work. I have redesigned it, and the new design now works. I've made it 1 inch thick and adjusted the mount screw spacing and rotated the mount tabs to be between the speaker screws. Also moved the wiring slot to a hole in the ring. It is a little small for terminals. I used #10x1/14 mount screws and #8x1 screws for the speaker. The screw holes as printed worked well.
I also used speaker gasket tape which I highly recommend: https://www.amazon.com/Parts-Express-Speaker-Gasketing-tape/dp/B0002ZPLPM/ref=sr_1_3?ie=UTF8&qid=1531112743&sr=8-3&keywords=speaker+gasket." https://3dcarparts.org/library/2015/Kia/Sportage/speaker-mount-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/e0b2cfe8-4d07-4fc7-92e6-92d1df4d65ed/images/speaker-mount-bracket-1_1767157012670_ninkru.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2015/Kia/Sportage/speaker-mount-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-52217b72-7232-4f60-b435-aad1069a696b 2006 Kia Cerato Ashtray "Update pending: PLA melted in Australian heat. I will also resize the runners eventually to fit better.
A very rough remix (copy pasta) on another car ashtray. Someone stole my original :(
Shouldn't be too hard to resize for other models
This should fit a Kia Cerato 2006
Should be right to print on just about any setting, but I used:
Nozzle: 0.4mm
Walls: 0.4mm
Height: 1.2mm
Support:
Touching Plate
Infill: 100
Takes a little over 12hrs to print on my Anet A8 at 30mm/sec" https://3dcarparts.org/library/2006/Kia/Cerato/ashtray https://r2-upload.3dcarparts.workers.dev/file/parts/52217b72-7232-4f60-b435-aad1069a696b/images/ashtray-1_1767156926754_re18t5.jpg in_stock 15.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Kia/Cerato/ashtray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e54c71b1-4b19-4ce4-b6da-1055a788b1f0 2013 Kia Rio Trunk Cover Attachment replacement parts for trunk cover for kia rio 3 hatchback. compatable with original parts. https://3dcarparts.org/library/2013/Kia/Rio/trunk-cover-attachment https://r2-upload.3dcarparts.workers.dev/file/parts/e54c71b1-4b19-4ce4-b6da-1055a788b1f0/images/trunk-cover-attachment-1_1767156897456_pavdjc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Kia/Rio/trunk-cover-attachment?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b11704b8-8260-41ca-b0a9-687a89771bd3 2005 Kia Sorento Mirror Gear I tried to find a pair of gears for my mirrors that where broken and i couldn;t find something nowhere. so or i had to pay for new ones 250$ each or to design and print them. So i design this gear at Tincercad cause im in rookie lever at design 3d parts. tested and working great. Hope this file it will help others that might be at my situation. Enjoy https://3dcarparts.org/library/2005/Kia/Sorento/mirror-gear https://r2-upload.3dcarparts.workers.dev/file/parts/b11704b8-8260-41ca-b0a9-687a89771bd3/images/mirror-gear-1_1767156832989_ndxj9x.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Kia/Sorento/mirror-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-79cfbfb8-e627-49bf-b73a-6fcd1fc7542b 2022 Hyundai Ioniq EVSE Wall Charger Holder "Fits Ioniq EV, among others.
Lightweight holder for your charger.
Can print without support." https://3dcarparts.org/library/2022/Hyundai/Ioniq/evse-wall-charger-holder https://r2-upload.3dcarparts.workers.dev/file/parts/79cfbfb8-e627-49bf-b73a-6fcd1fc7542b/images/evse-wall-charger-holder-1_1767156813527_rsbwx8.jpg in_stock 13.13 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories other https://3dcarparts.org/library/2022/Hyundai/Ioniq/evse-wall-charger-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-782ce209-9d3f-4bff-99d1-a90ba9f8a844 2009 Kia Sedona Van Ceiling Vent This part replaces the broken ceiling vents in our 2009 Kia Sedona (Part #853172J000TW). While not exactly the same part, it does allow for opening/closing and redirecting the airflow. https://3dcarparts.org/library/2009/Kia/Sedona/van-ceiling-vent https://r2-upload.3dcarparts.workers.dev/file/parts/782ce209-9d3f-4bff-99d1-a90ba9f8a844/images/van-ceiling-vent-1_1767156777758_64l67b.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2009/Kia/Sedona/van-ceiling-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-9bdb9326-b7c8-4d20-b75a-26aa7f4dc0a2 2007 Kia Rio Key Fob "KIA Rio 2007-2008 Key Fob.
The original one had a broken case that couldn't latch on to key ring, plus internal button had broken off PCB.
The case is bit difficult to snap together, but somewhat manageable, and key ring hole is a bit too small.
It worked well enough 1st go, so I couldn't be bothered to make anymore changes.
I included the .step file for anyone wanting to make changes in Fusion360.
Printed at 0.05mm layer height with support.
Doge donations: D5cqNG1nHCRWeyFHv5LaJNrMP54MVyM2Az
Much appreciated!" https://3dcarparts.org/library/2007/Kia/Rio/key-fob https://r2-upload.3dcarparts.workers.dev/file/parts/9bdb9326-b7c8-4d20-b75a-26aa7f4dc0a2/images/key-fob-1_1767156731012_gv8iuv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2007/Kia/Rio/key-fob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4c228719-92ee-4d72-ac7e-463c6b8c3141 1998 Honda Accord Armrest Clip Replacement for original Armrest clip https://3dcarparts.org/library/1998/Honda/Accord/armrest-clip https://r2-upload.3dcarparts.workers.dev/file/parts/4c228719-92ee-4d72-ac7e-463c6b8c3141/images/armrest-clip-1_1766983950054_wlsnqm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Honda/Accord/armrest-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ae17e186-a103-4e9d-bd81-faf027a746f0 2008 Honda Accord Rear Seat Mounting Clip "Clip that holds the rear seat down to the seat shelf. 1 per side.
Should fit all 8th gen Honda Accord." https://3dcarparts.org/library/2008/Honda/Accord/rear-seat-mounting-clip https://r2-upload.3dcarparts.workers.dev/file/parts/ae17e186-a103-4e9d-bd81-faf027a746f0/images/rear-seat-mounting-clip-1_1766983915131_06bv8g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Honda/Accord/rear-seat-mounting-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0eb851bc-299f-4267-80ef-f549f8a828b4 2007 Honda Accord Shift Lock Cap "After loose the cap of my Accord 07, I decided to print a new one.
I do recomend to print in a good quality ans with the first botton layer concentric.
Also, I used PETG to not having trouble with hot temperatures of a closed car in the sun.
This is my first upload, please comment!!
Uploading the cad file to anyone who want to remix or change it." https://3dcarparts.org/library/2007/Honda/Accord/shift-lock-cap https://r2-upload.3dcarparts.workers.dev/file/parts/0eb851bc-299f-4267-80ef-f549f8a828b4/images/shift-lock-cap-1_1766983873663_1tk66d.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Honda/Accord/shift-lock-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f3c54aaf-926f-429a-bcb3-8d6d05c4066e 2013 Honda Accord Trunk Trailer Wire Bracket "Bracket for holding trailer wire out of the way in the trunk. Un screw existing bolt/luggage hook and bolt back in with bracket inserted. Made for 9th gen Accord sedan but might work on other models as well.
Wire zip ties to the back of the bracket so, keeping it in place and preventing it from pulling on harness. Then the free end sits in the hook when you are not using the trailer.
Printed in PETG to handle cold weather in Canada." https://3dcarparts.org/library/2013/Honda/Accord/trunk-trailer-wire-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/f3c54aaf-926f-429a-bcb3-8d6d05c4066e/images/trunk-trailer-wire-bracket-1_1766983826191_egcjfk.jpg in_stock 13.89 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2013/Honda/Accord/trunk-trailer-wire-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ac3a710e-6b39-41a2-b56b-b8c8d35d5acf "1999 Honda [""Accord"",""CR-V""] Dome Light Button" "I made this button because I couldn't find it online, it fits perfectly. feel free to use.
Honda crv 1st and 2nd gen
Honda accord 1999" https://3dcarparts.org/library/1999/Honda/%5B%22Accord%22%2C%22CR-V%22%5D/dome-light-button https://r2-upload.3dcarparts.workers.dev/file/parts/ac3a710e-6b39-41a2-b56b-b8c8d35d5acf/images/dome-light-button-1_1766983768584_e5fmfs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1999/Honda/%5B%22Accord%22%2C%22CR-V%22%5D/dome-light-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-278e7674-a5d7-40b0-a238-1f29d9a4a41f 1987 Honda Accord Trunk Cover Clip "My clip is broken so I remodelled it in blender and printed a replacement. Works great.
Print on its side to give the clip arms strength." https://3dcarparts.org/library/1987/Honda/Accord/trunk-cover-clip https://r2-upload.3dcarparts.workers.dev/file/parts/278e7674-a5d7-40b0-a238-1f29d9a4a41f/images/trunk-cover-clip-1_1766983723396_eu9zzj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Honda/Accord/trunk-cover-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4152202e-224c-42c9-b8c6-eebed0dbdb6f 2000 Honda Accord Bumper Cover Fender Hanger "This is a bumper cover fender hanger for a 2000 Honda Accord. I'm not sure of the actual name, or how many different years/models/brands this part will work for, but I figured it's one of those stupid little things that are incredibly hard to locate, so might as well share it in case someone else needs it.
Apologies in advance for the orientation of the part. Because of the way the flex locks are situated, the model had to be oriented this way to successfully print the critical parts. So a Raft is definitely needed to print this. I printed mine in PLA, but PETG would've been better, or even ABS." https://3dcarparts.org/library/2000/Honda/Accord/bumper-cover-fender-hanger https://r2-upload.3dcarparts.workers.dev/file/parts/4152202e-224c-42c9-b8c6-eebed0dbdb6f/images/bumper-cover-fender-hanger-1_1766983682144_1v96im.jpg in_stock 7.47 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Honda/Accord/bumper-cover-fender-hanger?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf52c2df-392a-4555-84a6-d45ab96ebae2 1991 Honda Accord Door Handle (Inner) "In my country, there are very few Honda Accord 1989-1993 (CB3, CB7) models and finding any part on them is a big problem. That's how I could not find the door handle with the body.
I found the body and handle on the Internet, all separately and they were for other models.
Slightly tweaked for Honda Accord 1989-1993 (CB3, CB7)
This model is for the right side of the car.
For the left side, just make a mirror position
PS 21.02.2022 Fixed hole position and replaced files
В моей стране моделей Honda Accord 1989-1993 (CB3, CB7) очень мало и найти какую либо деталь на них является большой проблемой. Вот так я так и не смог найти ручку двери с корпусом.
Корпус и ручку нашел на просторах интернета, всё по отдельности и они были для других моделей.
Немного подправил под модель Honda Accord 1989-1993 (CB3, CB7)
Эта модель для правой стороны автомобиля.
Для левой стороны просто сделайте зеркальное положение" https://3dcarparts.org/library/1991/Honda/Accord/door-handle-inner https://r2-upload.3dcarparts.workers.dev/file/parts/bf52c2df-392a-4555-84a6-d45ab96ebae2/images/door-handle-inner-1_1766983649012_yqe595.jpg in_stock 7.74 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Honda/Accord/door-handle-inner?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e500c321-3869-4be6-9109-ea964afd198e 1986 Honda Accord Trunk Lock Linkage Trunk Linkage from Lock cylinder to Trunk Latch for a 1986 Honda Accord https://3dcarparts.org/library/1986/Honda/Accord/trunk-lock-linkage https://r2-upload.3dcarparts.workers.dev/file/parts/e500c321-3869-4be6-9109-ea964afd198e/images/trunk-lock-linkage-1_1766983585970_1szfuc.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1986/Honda/Accord/trunk-lock-linkage?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e52fb097-1101-4078-be8a-f00dba9debfb 2004 Honda Accord Door Lock Hole Cover When fixing my Honda Accord's door, the piece that goes around the door, broke! So when I went online to find a replacement piece, the cost was $150! for a 20mm piece. This is why I 3D modeled a replacement piece to fix this. https://3dcarparts.org/library/2004/Honda/Accord/door-lock-hole-cover https://r2-upload.3dcarparts.workers.dev/file/parts/e52fb097-1101-4078-be8a-f00dba9debfb/images/door-lock-hole-cover-1_1766983576027_imouw3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Honda/Accord/door-lock-hole-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1246301c-0999-4096-b421-10e948fe7935 1996 Honda Accord AC Knob "AC Knobs for my '96 Accord. I'm sure they fit other models but I don't know which. Files include the Sharingan Knob that I put in my car but I also included a blank. Dimensions for the cavity in the blank one are:
Diameter: 36.8mm x Height: 6.05mm.
Also included is a painting mask. I used that to paint the red on my sharingan knobs and then hand painted the tomoe black afterwards.
Enjoy" https://3dcarparts.org/library/1996/Honda/Accord/ac-knob https://r2-upload.3dcarparts.workers.dev/file/parts/1246301c-0999-4096-b421-10e948fe7935/images/ac-knob-1_1766983542189_dzwqdo.jpg in_stock 10.09 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Honda/Accord/ac-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5280281a-25a7-4f36-b1e0-dd0816b39ec7 2000 Honda Accord Wiper Fluid Reservoir Cap This will likely work with other Honda models as well. I printed mine in PLA+ but PLA would likely work just as well. It does get warm under the hood but I don't think it's quite warm enough to cause issues here. I would still check up on it after some time, however. https://3dcarparts.org/library/2000/Honda/Accord/wiper-fluid-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/5280281a-25a7-4f36-b1e0-dd0816b39ec7/images/wiper-fluid-reservoir-cap-1_1766983530143_mitqpe.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories cooling-system https://3dcarparts.org/library/2000/Honda/Accord/wiper-fluid-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a4b2669a-868b-4483-8c6d-cdf659f0d672 2014 Honda Accord Screen Glare Shield "i really disliked this screen always getting glare. so i designed a shield that blocks sun glare. the pictures show the regular sized one but i also included a short version in case you want a more discreet / low profile version.
the guard hooks into the cd player slot and is easily removable" https://3dcarparts.org/library/2014/Honda/Accord/screen-glare-shield https://r2-upload.3dcarparts.workers.dev/file/parts/a4b2669a-868b-4483-8c6d-cdf659f0d672/images/screen-glare-shield-1_1766983507817_i743iu.jpg in_stock 21.88 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2014/Honda/Accord/screen-glare-shield?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4f153287-3f5b-4a37-805d-bd6e511980d3 2004 Honda Accord Interior Light Cover Clips ı designed honda accord interior light cover clips. print and glue with hot silicone and use it. :) https://3dcarparts.org/library/2004/Honda/Accord/interior-light-cover-clips https://r2-upload.3dcarparts.workers.dev/file/parts/4f153287-3f5b-4a37-805d-bd6e511980d3/images/interior-light-cover-clips-1_1766983482456_b5c5yg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Honda/Accord/interior-light-cover-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-676b89e8-3bfe-4acd-affe-cf3b30e3753e 1979 Honda Prelude Engine Fuse Cover "1979-1982 Honda Prelude SN, 1977-78 Honda Accord SJ Engine Fuse Cover or Roof. This is an exact copy of the original. Recommended to print in ABS due to heat from engine.
Honda # 38260-671-010
If you would like a printed part but do not have a 3D printer, please email me at Nmitchell_47@yahoo.com and I can ship you one for a small fee. Thanks!
Check out more at G1Preludes.com" https://3dcarparts.org/library/1979/Honda/Prelude/engine-fuse-cover https://r2-upload.3dcarparts.workers.dev/file/parts/676b89e8-3bfe-4acd-affe-cf3b30e3753e/images/engine-fuse-cover-1_1766983473765_2iqmrt.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1979/Honda/Prelude/engine-fuse-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7af4d77a-73da-42b9-b566-15da85162fa2 2004 Honda Civic Subwoofer Adapter Remixed to fit my Pioneer Subwoofer in my 9th Gen FB6 Civic Si Sedan. Will fit any 8th or 9th gen civic or accord with the factory 8in subwoofer and any standard 6 hole subwoofer. I designed it in Fusion360 but based the design off of the original. Had to elongate the mounting slots to fit the newer Civic but left them long enough so they should fit the 8th gen. https://3dcarparts.org/library/2004/Honda/Civic/subwoofer-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/7af4d77a-73da-42b9-b566-15da85162fa2/images/subwoofer-adapter-1_1766983459241_l83xis.jpg in_stock 26.98 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Honda/Civic/subwoofer-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-62277868-4ca3-4d3d-b3bc-d9186bc5d016 2002 Honda Accord 6.5 inch Front Speaker Mount "6.5 inch Front Speaker Mount - Honda Accord 1999-2004
Replaces factory speaker mount with larger speaker.
Check for fit and adjust accordingly." https://3dcarparts.org/library/2002/Honda/Accord/65-inch-front-speaker-mount https://r2-upload.3dcarparts.workers.dev/file/parts/62277868-4ca3-4d3d-b3bc-d9186bc5d016/images/65-inch-front-speaker-mount-1_1766983443614_8xfba8.jpg in_stock 24.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Honda/Accord/65-inch-front-speaker-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4f3a80f1-f038-435b-9003-d080171e5134 1979 Honda Prelude Window Crank Base "Reproduction part for the window crank handle base. Will fit 1979-82 Honda Prelude, 1978-1989 Accord and 1978-1983 Civic.
Honda # 75343-657-010
If you would like a printed part but do not have a 3D printer, please email me at Nmitchell_47@yahoo.com and I can ship you one for a small fee. Thanks!" https://3dcarparts.org/library/1979/Honda/Prelude/window-crank-base https://r2-upload.3dcarparts.workers.dev/file/parts/4f3a80f1-f038-435b-9003-d080171e5134/images/window-crank-base-1_1766983428151_galbl5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Honda/Prelude/window-crank-base?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c70ac289-a098-47e2-8214-bb5495b29f8e 2004 Honda Accord Rear Door Cable Holder "This will hold the cable onto the door handle frame when the green plastic cable housing end breaks off. This replaces the metal angle, the mounting hole is printed in but will need an M3x0.5 tap to create the threads.
Just remove the metal angle, and attach the print and then the cable will snap in place.
I printed it with tree supports and the bolt hole on the top. I used PETG-CF, but ABS or ASA may be more suitable..." https://3dcarparts.org/library/2004/Honda/Accord/rear-door-cable-holder https://r2-upload.3dcarparts.workers.dev/file/parts/c70ac289-a098-47e2-8214-bb5495b29f8e/images/rear-door-cable-holder-1_1766983365727_0slp87.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Honda/Accord/rear-door-cable-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-767911e0-e492-47b3-8e72-9edd792ab32d 1995 Honda Civic Trunk Emblem Badge Base "This are bases for flat emblems that are cheap and it can stick to the base just using the included double sided tape. I designed 3 versions for 3 different dimensions:
- 63mm x 54mm (OEM size for the Civic EJ1)
- 68mm x 56mm
- 72mm x 60mm
For fixing the base to the trunk you can use two M3 screws and nuts, I would be better if you use a auto locking nuts on the back and some washer to spread the load into the metal sheet.
Also be sure to use some gasket maker around the bolts so you don't get some water getting into the trunk.
The emblems can be bought on ebay, amazon or aliexpress. A link as example to buy the same emblems I used is:
https://www.ebay.com/itm/284108633183
If you are on Argentina you can ask IRPRacing: https://irpracing.com.ar/producto/emblemas-exteriores-honda-civic-accord-88-00-varios-colores/" https://3dcarparts.org/library/1995/Honda/Civic/trunk-emblem-badge-base https://r2-upload.3dcarparts.workers.dev/file/parts/767911e0-e492-47b3-8e72-9edd792ab32d/images/trunk-emblem-badge-base-1_1766983296937_7cucxe.jpg in_stock 10.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1995/Honda/Civic/trunk-emblem-badge-base?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7db167df-9610-4355-b6de-d1caf810f4bd 2007 Honda Accord Navigation Center Button "That is the Center Button - Joystick for the Honda Accord navigation Unit
and is actually rev.2
made it on Tinkercad using a original one but is not 100% like the original.
Printed with full line support and 8mm brim. time it takes with speed of 50mm is about 33 minutes.
Here is a link to the model itself in tinkercad, so feel free to mod it any way you want.
https://www.tinkercad.com/things/fBIk2Tf76jf
that version is not a 100% tight fit cause it was used for a broken center pin on the navi itself and with a blob of hot glue was the easiest fix." https://3dcarparts.org/library/2007/Honda/Accord/navigation-center-button https://r2-upload.3dcarparts.workers.dev/file/parts/7db167df-9610-4355-b6de-d1caf810f4bd/images/navigation-center-button-1_1766983189307_a8qlzv.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Honda/Accord/navigation-center-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-efe1ae21-dd70-4441-9b28-cea65362a18d 2004 Honda Accord Nalgene Cup Holder Adapter Print both parts separately and super glue the top and bottom together. This fits my 2004 Honda Accord cup holder https://3dcarparts.org/library/2004/Honda/Accord/nalgene-cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/efe1ae21-dd70-4441-9b28-cea65362a18d/images/nalgene-cup-holder-adapter-1_1766974042650_r7bpd6.jpg in_stock 32.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Honda/Accord/nalgene-cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c4c29741-d15a-4cf4-8095-6d1b9bfa7199 2005 Dodge Charger Rain Sensor Bracket Rain sensor windshield mounting bracket for Dodge Charger. Bracket base printed from ABS, attached to windshield with epoxy glue. Clip printed from Nylon which was flexible and strong enough to push out all air bubbles between sensor and windshield. https://3dcarparts.org/library/2005/Dodge/Charger/rain-sensor-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/c4c29741-d15a-4cf4-8095-6d1b9bfa7199/images/rain-sensor-bracket-1_1766734208105_ihdltr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/2005/Dodge/Charger/rain-sensor-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-58d3b7d8-83f7-4acb-bd04-a9681423b0ff 2006 Dodge Charger Taillight Fastener after using chair leg ends to hold in my taillights on 2006 charger r/t i finally made new fasteners pretty sure 300 and magnum use same item 2005-2010 afaik https://3dcarparts.org/library/2006/Dodge/Charger/taillight-fastener https://r2-upload.3dcarparts.workers.dev/file/parts/58d3b7d8-83f7-4acb-bd04-a9681423b0ff/images/taillight-fastener-1_1766734192060_dxfghp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Dodge/Charger/taillight-fastener?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a8411773-6faa-4afd-9094-5476d8574e68 2005 Dodge Charger Lane Departure Camera Bracket Print with ABS. https://3dcarparts.org/library/2005/Dodge/Charger/lane-departure-camera-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/a8411773-6faa-4afd-9094-5476d8574e68/images/lane-departure-camera-bracket-1_1766734173557_agzsl8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2005/Dodge/Charger/lane-departure-camera-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf70c559-40b5-4fae-b6ce-f205827c8235 1987 Toyota Supra Center Console Latch Center console latch for an A70 Supra. Only difference from the source is the cutout for the indexing bar on the lid. https://3dcarparts.org/library/1987/Toyota/Supra/center-console-latch https://r2-upload.3dcarparts.workers.dev/file/parts/cf70c559-40b5-4fae-b6ce-f205827c8235/images/center-console-latch-1_1766636787674_x1w508.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1987/Toyota/Supra/center-console-latch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-66b519ac-9610-48d6-acb7-722abb8df747 1990 Mazda Miata Softtop Latch Cap "This part is designed to replace broken cap of mazda miatas softtop latch.
Original part number is NA01-R1-311.
It was designed to match original part as accurately as possible.
It prints fast, so to achieve durability print with 100% infill." https://3dcarparts.org/library/1990/Mazda/Miata/softtop-latch-cap https://r2-upload.3dcarparts.workers.dev/file/parts/66b519ac-9610-48d6-acb7-722abb8df747/images/softtop-latch-cap-1_1766636704765_7xgdqp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Mazda/Miata/softtop-latch-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-773370c7-3721-4614-bd26-dd8cadeef60f 1996 Mazda Miata Gauge Panel "right now i am in the process of turboing my 1996 Mazda miata and i couldn't seem to find a good way to mount the boost gauge and AFR gauge so i removed the little cubby under the radio and made this to fit in there! hope someone else can get some use of this i know i will!
I used Brass #8 x 3/4 in. Wood Screws to hold mine in and it worked great!" https://3dcarparts.org/library/1996/Mazda/Miata/gauge-panel https://r2-upload.3dcarparts.workers.dev/file/parts/773370c7-3721-4614-bd26-dd8cadeef60f/images/gauge-panel-1_1766636650105_r51k7q.jpg in_stock 18.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1996/Mazda/Miata/gauge-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f2d0171a-8f93-4427-a2bb-149e1b2a9e17 1985 Mazda RX-7 Dash Triangle Vent "It's been years since I've printed this but depending on the surface quality you want then can print bottom down with supports to support the top lip, or top down with no supports. I printed it in ABS. Sorry the initial orientation is not correct but just rotate it 90 degrees on the X axis to lay flat.
In the attached images I've vapor smoothed the part before hitting it with some spray paint. They have been sitting in the car for at least 3 years now and still look great.
This is the drivers side, but just flip it for the passenger side." https://3dcarparts.org/library/1985/Mazda/RX-7/dash-triangle-vent https://r2-upload.3dcarparts.workers.dev/file/parts/f2d0171a-8f93-4427-a2bb-149e1b2a9e17/images/dash-triangle-vent-1_1766636583077_t72dcf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1985/Mazda/RX-7/dash-triangle-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a958cf01-8e8b-4a7e-a4b8-51ae11f682b7 2014 Mazda 3 Triangle Bumper Plug "You can mirror the file to get the cover for the opposite side. Print with the flat part on the bed, tabs pointing up. Supports aren't really needed, but you might want to have them for the overhang. Print in a strong and heat resistant plastic, such as PETG.
It isn't a PERFECT fit, but it's not too bad!" https://3dcarparts.org/library/2014/Mazda/3/triangle-bumper-plug https://r2-upload.3dcarparts.workers.dev/file/parts/a958cf01-8e8b-4a7e-a4b8-51ae11f682b7/images/triangle-bumper-plug-1_1766636565496_01zwrl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2014/Mazda/3/triangle-bumper-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-66bb4884-4f29-4e0f-8dc2-1d2f757d5fe6 1997 Mazda 626 Lifter Gear "Mazda 626 lifter gear
He restored the broken mechanism for the glass lift.
The printed PLA with plastic, a speed of 40 mm / s, is pretty good to see how it behaves when working.
Maybe someone is useful." https://3dcarparts.org/library/1997/Mazda/626/lifter-gear https://r2-upload.3dcarparts.workers.dev/file/parts/66bb4884-4f29-4e0f-8dc2-1d2f757d5fe6/images/lifter-gear-1_1766636532580_hvf6bs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/1997/Mazda/626/lifter-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f461376f-8b15-4750-b33e-9b9f40667eb3 1990 Mazda MX5 Handbrake Cover - Cherry Blossom "I made this simple handbrake cover to replace the stock one on my MK1 Mazda MX5.
it features an embossed cherry blossom design.
you can paint it if you choose to do so, id love to see this on yours!" https://3dcarparts.org/library/1990/Mazda/MX5/handbrake-cover-cherry-blossom https://r2-upload.3dcarparts.workers.dev/file/parts/f461376f-8b15-4750-b33e-9b9f40667eb3/images/handbrake-cover-cherry-blossom-1_1766636084957_e3q2e2.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX5/handbrake-cover-cherry-blossom?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bf5ee2b3-0b47-4b7b-99d3-79432ea0a685 2002 Mazda Miata Window Switch Well the Miata window switch fingers broke and I don't feel like going out to find one so here we are. This thing is heavily a work in progress. I have it in my car now and its functional. However I was unable to properly size the return spring hole. But it works a whole lot better than the screwdriver I was using to put my window up and down. If anyone knows where I can buy just the plastic switch part and not the whole assembly let me know. https://3dcarparts.org/library/2002/Mazda/Miata/window-switch https://r2-upload.3dcarparts.workers.dev/file/parts/bf5ee2b3-0b47-4b7b-99d3-79432ea0a685/images/window-switch-1_1766636024108_kt9kmh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2002/Mazda/Miata/window-switch?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1fcdc675-1e9a-4f04-ac2d-5c4d5c2fc25a 2008 Mazda 3 Power Windows Gear "Gear for Power Window Motor for Mazda 3, 5, 6 2004 - 2012 RX8 , CX7, CX9. My power windows motor's gear wheel had three missing teeths. I disigned the gear using the Gear Generator For Customizer V2.0, The gear fit and works just like the real one.
inspired by http://www.thingiverse.com/thing:393607" https://3dcarparts.org/library/2008/Mazda/3/power-windows-gear https://r2-upload.3dcarparts.workers.dev/file/parts/1fcdc675-1e9a-4f04-ac2d-5c4d5c2fc25a/images/power-windows-gear-1_1766635977171_74gbh5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2008/Mazda/3/power-windows-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-51b38f5b-96d4-4ac7-b89b-b11b0726e863 1996 Nissan 300ZX 3rd Brake Light Stud Retainer "Back at it for another 300ZX part ! This is a Stud retainer for the 3rd brake light bar on a 1996 Nissan 300ZX. I was replacing the bar that was broken, really common problem on these, and ended up twisting the stud inside of the plastic retainer. Had to destroy the retainer to get the nut removed. Figured I would make one instead of ordering and waiting for another. There are only two of these on this part. I printed multiples in case I messed one up putting it back together. I did not need glue or anything to hold the stud in place as it was a really tight fit.
Printed without support by flipping the part on its end. Very little sagging due to the very short distance that needed bridged.Print settings were 3 shell, .2 layer height, no support, and 85% infill.
Let me know of any questions or concerns. Hope it helps =)" https://3dcarparts.org/library/1996/Nissan/300ZX/3rd-brake-light-stud-retainer https://r2-upload.3dcarparts.workers.dev/file/parts/51b38f5b-96d4-4ac7-b89b-b11b0726e863/images/3rd-brake-light-stud-retainer-1_1766634955747_e8jac8.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1996/Nissan/300ZX/3rd-brake-light-stud-retainer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2f819fbf-a3c6-480e-9156-0c92294979ab 1993 Nissan 300ZX Rear Hatch Latch Trim Just my design of a rear latch trim piece from a 2 seater 300zx nissan https://3dcarparts.org/library/1993/Nissan/300ZX/rear-hatch-latch-trim https://r2-upload.3dcarparts.workers.dev/file/parts/2f819fbf-a3c6-480e-9156-0c92294979ab/images/rear-hatch-latch-trim-1_1766634939912_rbxxnw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Nissan/300ZX/rear-hatch-latch-trim?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-25cfa7a6-86cb-4d78-8c6d-e5ebd5534de8 1990 Nissan 300ZX Cup Holder with Charger "Feel free to remix yourself to fit you needs. You will have to dremel the bezel to make room for the Cup Holder. I did not model to sides of the cup holder. I put an LED into mine and like the look of an open void. Also added USB charger ports which i wired to the stock cigarette lighter wires
Hardware: 4x M4 bolts
4x washers
4x heat set nuts
1x 12V USB C
Car Charger Socket: https://www.amazon.com/gp/product/B08XLKX832/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Printed in PETG" https://3dcarparts.org/library/1990/Nissan/300ZX/cup-holder-with-charger https://r2-upload.3dcarparts.workers.dev/file/parts/25cfa7a6-86cb-4d78-8c6d-e5ebd5534de8/images/cup-holder-with-charger-1_1766634865966_r1g8im.jpg in_stock 24.05 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/cup-holder-with-charger?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-63de4596-f594-4e3d-b517-e146ee5b0718 1990 Nissan 300ZX Ignition Bezel "Needed this as mine was missing from my Z32
Print in TPU, it snaps in with a tight fit." https://3dcarparts.org/library/1990/Nissan/300ZX/ignition-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/63de4596-f594-4e3d-b517-e146ee5b0718/images/ignition-bezel-1_1766634844321_gp36jf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Nissan/300ZX/ignition-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b4125cdd-8b90-4e37-b24b-fee955d91648 1993 Nissan 300ZX T-Top Release O-Ring "T-Top ""release"" slider thing falling out? See that little divut there? There's supposed to be a rubber o-ring thing. Printed this in TPU and stretched it on with a little help from a lighter and now it doesn't fall out.
Note: I know USDM models have locks on the T-Tops. I don't know if this will fit on them. My car is a 1989 JDM import." https://3dcarparts.org/library/1993/Nissan/300ZX/1993-nissan-300zx-t-top-release-o-ring https://r2-upload.3dcarparts.workers.dev/file/parts/b4125cdd-8b90-4e37-b24b-fee955d91648/images/t-top-release-o-ring-1_1766634824987_2l1fqc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Nissan/300ZX/1993-nissan-300zx-t-top-release-o-ring?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ae3d90f0-269e-4680-9b07-2c0e0a3e3d10 1990 Nissan 300ZX Wiper Link Bushings this is parts my car needed,and no more part wil be made at this point https://3dcarparts.org/library/1990/Nissan/300ZX/wiper-link-bushings https://r2-upload.3dcarparts.workers.dev/file/parts/ae3d90f0-269e-4680-9b07-2c0e0a3e3d10/images/wiper-link-bushings-1_1766634796118_p9opqh.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Nissan/300ZX/wiper-link-bushings?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d7193b60-5137-430e-9ce1-31e950d5a6b9 1984 Nissan Z31 AC Gauge Pod "This turns the ac vent right to the steering wheel into a gauge pod to utilize the JJCOCO WATER TEMP GAUGE / ZHSYMX GAUGES and the square voltmeter ""Panel Volt Meter - 4.5V to 30VDC"" available at adafruit (Product ID: 575)
To install this i recommend retiring the radio and unclip the ac vent from the back, the install of this part its the same as the removal of the oem ac vent.
You WILL need to adjust the model to accomodate different gauges." https://3dcarparts.org/library/1984/Nissan/Z31/ac-gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/d7193b60-5137-430e-9ce1-31e950d5a6b9/images/ac-gauge-pod-1_1766634762599_vah0et.jpg in_stock 28.77 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Nissan/Z31/ac-gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-46d754fe-d1db-434e-8d4c-b7902e6c182d 1985 Nissan 300ZX Hose-Drain Front T-top "This is a close interpretation of the lower rubber grommet/pass-thru section the forward T-top drain tubes (76990-03P00) on the Nissan Z31 300ZX. The 10mm OD polyvinyl tubing runs down the A-pillar and then is glued into this black rubber piece which then passes thru the sheetmetal. It often can deteriorate, letting water drain into the cabin of the car.
The original part acts as a grommet on either side of the sheetmetal.
Rev2 is a 1:1 test mockup, printed from PETG.
Rev3 is a 1:1 test mockup, with features that should allow it to be sandwiched into the sheetmetal like the original.
If you cannot print flexible filament, maybe use Rev2 and RTV to hold in in place.
If you can print flexible filament, use Rev3...and rtv anyway." https://3dcarparts.org/library/1985/Nissan/300ZX/hose-drain-front-t-top https://r2-upload.3dcarparts.workers.dev/file/parts/46d754fe-d1db-434e-8d4c-b7902e6c182d/images/hose-drain-front-t-top-1_1766634694592_lu8yf1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1985/Nissan/300ZX/hose-drain-front-t-top?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7213f131-d862-4864-9a11-18fd2ab2d20a 1990 Mazda Miata Door Bushing "My spin on a miata door bushing. Others are too complicated, or the holes are too short. Also I include freecad file for easier editing.
Even pla did the job, but I switched to PETG and it's ok, too." https://3dcarparts.org/library/1990/Mazda/Miata/door-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/7213f131-d862-4864-9a11-18fd2ab2d20a/images/door-bushing-1_1766017686260_xvs1ib.jpg in_stock 11.58 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/door-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a1cdb34c-6fb1-4ed1-9b30-e993bb8b529e 1991 Mazda Miata HVAC A/C Knob Controls A/C knob for mazda miata 1989 - 1997 https://3dcarparts.org/library/1991/Mazda/Miata/hvac-ac-knob-controls https://r2-upload.3dcarparts.workers.dev/file/parts/a1cdb34c-6fb1-4ed1-9b30-e993bb8b529e/images/hvac-ac-knob-controls-1_1766016841459_yzo1j1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1991/Mazda/Miata/hvac-ac-knob-controls?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3247f179-9083-4a1d-b739-d86b384ea2b7 2000 Mazda Miata Gauge Pod "Gauge pod for your mazda miata/mx5 in the crashpad.
Design like Sharka's Gauge Cups" https://3dcarparts.org/library/2000/Mazda/Miata/gauge-pod https://r2-upload.3dcarparts.workers.dev/file/parts/3247f179-9083-4a1d-b739-d86b384ea2b7/images/gauge-pod-1_1766016811345_yz8ir8.jpg in_stock 13.37 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Mazda/Miata/gauge-pod?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eca9193d-32c5-4fe5-a7c1-df3d22ed2c02 2008 Mazda MX-5 Windscreen Cap Cover "As you know, when you remove these caps/covers the tabs snap off, well they will do at that age.
I had one still on the car held on with 1 clip and blu-tac, so i measured it up and made this little bugger.
It actually fits, first go." https://3dcarparts.org/library/2008/Mazda/MX-5/windscreen-cap-cover https://r2-upload.3dcarparts.workers.dev/file/parts/eca9193d-32c5-4fe5-a7c1-df3d22ed2c02/images/windscreen-cap-cover-1_1766016790165_ps466y.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Mazda/MX-5/windscreen-cap-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d7bb69e3-6f17-47dc-9565-89940ecdd6df 2005 Mazda MX-5 Cam Gear Locking Tool MX-5 MX5 Miata Cam Gear Locking Tool by BEAVIS https://3dcarparts.org/library/2005/Mazda/MX-5/cam-gear-locking-tool https://r2-upload.3dcarparts.workers.dev/file/parts/d7bb69e3-6f17-47dc-9565-89940ecdd6df/images/cam-gear-locking-tool-1_1766016730837_ij76gb.jpg in_stock 13.25 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/2005/Mazda/MX-5/cam-gear-locking-tool?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5fcc84b6-2804-4aa0-bdbc-58311d1201b2 2000 Mazda Miata Hand Brake Sleeve As shown. I used ABS. https://3dcarparts.org/library/2000/Mazda/Miata/hand-brake-sleeve https://r2-upload.3dcarparts.workers.dev/file/parts/5fcc84b6-2804-4aa0-bdbc-58311d1201b2/images/hand-brake-sleeve-1_1766016697467_hzldb3.jpg in_stock 17.25 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Mazda/Miata/hand-brake-sleeve?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bafe97c5-ba40-497f-b9c7-f1f1537e6743 1999 Mazda MX-5 Miata Window Switch Clips/Tabs These tabs/clips superglue in to fix the broken ones on your window switch. Extremely simple and effective :). This is in a 99 MX5 (NB8A), no idea if it works in others. https://3dcarparts.org/library/1999/Mazda/MX-5%20Miata/window-switch-clipstabs https://r2-upload.3dcarparts.workers.dev/file/parts/bafe97c5-ba40-497f-b9c7-f1f1537e6743/images/window-switch-clipstabs-1_1766016659742_foecz5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/1999/Mazda/MX-5%20Miata/window-switch-clipstabs?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b453dc2d-71d4-450f-a48f-32409613b42c 2005 Mazda MX-5 Antenna Delete Plug "Simple threaded antenna delete plug for our loved mx-5, use spacer in ""trunk side"" of plug for tighter fit. If you forgot to plug antenna hole during bodywork this is a great solution :)" https://3dcarparts.org/library/2005/Mazda/MX-5/antenna-delete-plug https://r2-upload.3dcarparts.workers.dev/file/parts/b453dc2d-71d4-450f-a48f-32409613b42c/images/antenna-delete-plug-1_1766016604038_wiyhxq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mazda/MX-5/antenna-delete-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8677a0e0-aa12-4a42-bbc8-20ba2242ed38 1990 Mazda Miata Center Console Delete Cap A cap to cover the hole left with a removed center console on a 1990-1997 Mazda Miata. It has slight clearance from the transmission tunnel to fit a carpet. https://3dcarparts.org/library/1990/Mazda/Miata/center-console-delete-cap https://r2-upload.3dcarparts.workers.dev/file/parts/8677a0e0-aa12-4a42-bbc8-20ba2242ed38/images/center-console-delete-cap-1_1766016547473_qsvpro.jpg in_stock 17.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/Miata/center-console-delete-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2c9e25ff-aef4-4f51-bee5-c0a976d9a4d8 2005 Mazda Miata Trunk/Fuel Lid Levers Cover "Cover for the cables and bolts that attach to the trunk and fuel cap levers at the rear of the transmission tunnel. Fits using original screws.
I didn't have the bed space to make it larger, else I would have made the rear angle larger to better contact the rear firewall.
Inspired by:
Miata Fuel Pull Cover (NA) thing:4545328
josh7owens" https://3dcarparts.org/library/2005/Mazda/Miata/trunkfuel-lid-levers-cover https://r2-upload.3dcarparts.workers.dev/file/parts/2c9e25ff-aef4-4f51-bee5-c0a976d9a4d8/images/trunkfuel-lid-levers-cover-1_1766016512048_bofsho.jpg in_stock 29.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Mazda/Miata/trunkfuel-lid-levers-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-55331866-17c1-490e-b7ab-de994ee1c0ee 1990 Mazda Miata Oil Dipstick Handle "*** Updated and reuploaded as updates meant the first model was unusably small. V2 model should work now!***
Dipstick handle to replace the ever-broken handle on your Miata, MX5 or Eunos! I didn't like any of the other STL offerings online, so I designed this one instead! I have also included a sliced Cura profile I used for my final model in ABS if you'd like to save yourself some time and fire it straight into the printer!
If you found this useful, please donate what you think it is worth to my paypal.me, at https://paypal.me/danobriendesigns?locale.x=en_US to help cover the time of design.
Thanks, and Enjoy! Please feel free to ask any questions, or let me know if you have issues, I'm happy to help!
Updated 11/5/20 - On specific slicer settings, the printer sometimes had trouble printing the overhang, even with supports. That said, the file printed multiple times for me with no issues. Regardless, I made some tiny adjustments and that issue has been ironed out. Let me know if you have any issues!" https://3dcarparts.org/library/1990/Mazda/Miata/oil-dipstick-handle https://r2-upload.3dcarparts.workers.dev/file/parts/55331866-17c1-490e-b7ab-de994ee1c0ee/images/oil-dipstick-handle-1_1766016458617_gvxxiz.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/1990/Mazda/Miata/oil-dipstick-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1e3c0b6-d568-4a89-b496-b4021e05d440 1990 Mazda MX-5 Window Crank "Mazda Mx5 Na window crank shaped like the OEM before the restilyng.
IMPORTANT:
it must be assembled as in the photos. It is assembled using an M4 low cap steel bolt with a hex socket.
The lever knob comes together but doesn't turn very well. you have to force it in and turn it and after a while it works. It was a work in progress until I discovered aliexpress.
If you like this part please tip me I will use your donation to support my Mx5 build.
If you have question or you want to see my Mx5 search "" nomoney_miata "" on Instagram.
Thanks" https://3dcarparts.org/library/1990/Mazda/MX-5/window-crank https://r2-upload.3dcarparts.workers.dev/file/parts/b1e3c0b6-d568-4a89-b496-b4021e05d440/images/window-crank-1_1766016427728_4gxmy2.jpg in_stock 12.93 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1990/Mazda/MX-5/window-crank?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-efc84e00-6221-4067-bd61-f72cd709a213 1988 Toyota Supra Front Badge Retainer Clip "The front badge retainer clip has a tendency to rust away. This plastic clip does the same job and will not rust.
Print the clip on its side so the layer lines are aligned properly for the clip to flex like a spring.
This clip is also used to retain the headlight washers in the nose panel." https://3dcarparts.org/library/1988/Toyota/Supra/front-badge-retainer-clip https://r2-upload.3dcarparts.workers.dev/file/parts/efc84e00-6221-4067-bd61-f72cd709a213/images/front-badge-retainer-clip-1_1766016375618_w1huf6.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1988/Toyota/Supra/front-badge-retainer-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4dccb82b-9e6f-4438-81eb-31f60a5fbca4 2000 Mazda Miata Window Roller Guide "Window roller replacement for MX5 Miata, modeled off an original roller from a 2000 NB MX-5.
You'll want 100% infill for obvious reasons.
Exported from blender with measurement in meters as Flashforge's software auto converts meters to millimeters. Original .blend file included as usual for those that need measurement tweaks." https://3dcarparts.org/library/2000/Mazda/Miata/window-roller-guide https://r2-upload.3dcarparts.workers.dev/file/parts/4dccb82b-9e6f-4438-81eb-31f60a5fbca4/images/window-roller-guide-1_1766016333840_vqtn45.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2000/Mazda/Miata/window-roller-guide?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7e2ceb17-9642-4c5a-885e-f2fddd6d69c6 1990 Mazda MX-5 Sequential LED Turn Signals "DISCLAIMER: I'm still perfecting this design and there are some things that need some more tweaking. With that, I am open to any suggestions and constructive criticism. And if you have any questions please ask. Enjoy!!
I wanted cool LED sequential turn signals but didn't want to pay $200+ for a set. I also wanted to use my turn signals as intakes since I have the air filter behind the headlight.
I found these Sequential LED strips on eBay that you can cut to the length you want. My design is basically just a housing and mounting solution for those LED strips.
Also would like to note this is probably not legal in most places,
The running light is white and the turn signal is amber that turns on sequentially. Video here: https://www.reddit.com/r/Miata/comments/hlg1kq/i_made_these_3d_printed_siquential_turn_signals/
See the Instructions PDF for a basic installation guide and some tips.
The turn signals now being LED will make the flasher relay hyperblink. To fix this you can replace a resistor on the relay. I linked the 1M resistors I used below. Here is a write up on how to do it: https://forum.miata.net/vb/showthread.php?t=335534
Hardware: 4x Socket Head M4x12mm
4x M4 Washers
4x M4 Nuts (I used Nylon Lock Nuts so they don't loosen accidentally)
2x Socket Head M5x16mm
2x Fender Washers (Needs to be bigger than a normal washer since the mounting hole is large and to spread out the load. You can make one from sheet metal if needed.)
2x M5 Nuts (Also Lock Nuts would be best)
Sequential LED
Strips: https://www.ebay.com/itm/2pcs-LED-DRL-Daytime-Running-Lamp-Strip-Light-Sequential-Flowing-Turn-Signal/383174835261?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Ddff6cd897ce54454b5379f6997134026%26pid%3D100675%26rk%3D4%26rkt%3D15%26mehot%3Dnone%26sd%3D292032282132%26itm%3D383174835261%26pmt%3D1%26noa%3D1%26pg%3D2380057%26brand%3DUnbranded&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A2634cad0-be26-11ea-bd5b-74dbd18008f6%7Cparentrq%3A1b234b351730aa119c233dc2fff7b864%7Ciid%3A1
1M
Ohm Resistors: https://www.amazon.com/gp/product/B0185FCM0W/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Solder
Connectors: (These are easier than soldering)
https://www.amazon.com/Kuject-Connectors-Waterproof-Electrical-Automotive/dp/B073RMRCC3/ref=sr_1_2_sspa?crid=15KP77VGBQG5&dchild=1&keywords=solder+connectors+with+heat+shrink&qid=1593888262&sprefix=solder+con%2Caps%2C162&sr=8-2-spons&psc=1&smid=ANYCM9RSLDH7Y&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzT043SDlESzdGRFJQJmVuY3J5cHRlZElkPUEwOTkxODI2UkJRV0NTVUpLMjdaJmVuY3J5cHRlZEFkSWQ9QTA5Mzg1MDgyS05OQ1NGTUhOSU4xJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==" https://3dcarparts.org/library/1990/Mazda/MX-5/sequential-led-turn-signals https://r2-upload.3dcarparts.workers.dev/file/parts/7e2ceb17-9642-4c5a-885e-f2fddd6d69c6/images/sequential-led-turn-signals-1_1766016285242_ia1ch8.jpg in_stock 10.45 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/1990/Mazda/MX-5/sequential-led-turn-signals?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b2bacc70-97d7-4566-b230-461983fa55e1 2002 Toyota Supra Speaker Adaptor This fit my rockford fosgate speakers, may not fit yours. https://3dcarparts.org/library/2002/Toyota/Supra/speaker-adaptor https://r2-upload.3dcarparts.workers.dev/file/parts/b2bacc70-97d7-4566-b230-461983fa55e1/images/speaker-adaptor-1_1766016144732_zm83an.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2002/Toyota/Supra/speaker-adaptor?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cdb47bff-922d-4666-b803-0b3140083180 1993 Toyota Supra Cup Holder "This print is to replace the Mk4 Supra ashtray with a cup holder.
Should fit a redbull / pepsi can.
Haven't tested it so pending print/ test." https://3dcarparts.org/library/1993/Toyota/Supra/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/cdb47bff-922d-4666-b803-0b3140083180/images/cup-holder-1_1766016006386_tywuz2.jpg in_stock 12.34 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1993/Toyota/Supra/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-52f698ad-54dd-4f4b-929b-462ce66dc182 1983 Toyota Supra Rear Shock Cover Remake of the Rear Shock Tower Covers for the MK2 Toyota Supra. Could not find them anywhere so decided to make them! https://3dcarparts.org/library/1983/Toyota/Supra/rear-shock-cover https://r2-upload.3dcarparts.workers.dev/file/parts/52f698ad-54dd-4f4b-929b-462ce66dc182/images/rear-shock-cover-1_1766015974781_fymxso.jpg in_stock 8.50 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1983/Toyota/Supra/rear-shock-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b588f164-bd9e-4590-9d33-abe2a23d1158 1997 Mazda Miata Double Din Mount "PiDash NA Miata Double Din Mount for Raspberry Pi Official 7"" Touchscreen
These files are used to fit a Raspberry Pi Official 7"" Touchscreen to the radio opening of a NA Mazda Miata using the provided files to 3D print brackets along with an assortment of M3 nuts and bolts and some of the Miata's factory hardware. I used this to build a ""dash"" for my TunerStudio gauges but it could also be made into a radio for use with OpenAuto or CrankShaft.
This was tested to fit in a 1997 Miata M Edition. The Miata interior does not have a standard size double din opening and that is what the spacer is for is to take up the area above and below the screen. Different model years and various trim Miatas have multiple versions of the tombstone with different size radio openings so the spacer may not fit all variations. Although the actual hardware that mounts the screen to the radio opening should work across multiple years and most people should be able to modify the spacer to work if needed or source a different tombstone for a clean install.
LH and RH side mounts attach to the screen mount via captive nuts in the screen mount. The slots are designed to use the M3 hardware linked below.
Link for M3
Hardware: binifiMux 360pcs M3 x 4mm / 6mm / 8mm / 10mm / 12mm / 16mm /20mm Pan Head Phillips Machine Screws and M3 Hex Nuts Assortment Kit For Toys RC Models 3D https://www.amazon.com/dp/B08N5TJ2XV
The acc mount is designed to use the same standoffs as the Raspberry Pi which I believe is M2.5.
Note 1: Some of the ribs on the rear of the tombstone will need to be trimmed when fitting it as not to press on the screen. If you make precise cuts, perhaps using some diagonal side cutters, and are careful not to damage the tombstone you should not see any evidence of said cuts when the tombstone is installed.
Note 2: Files should be printed in a filament that can withstand the high temps present in a cars interior such as ASA.
Note 3: Test fit the screen to the screen mount and get it centered before fitting the side mounts. The mounting holes for the screen are slightly offset so if the screen does not appear centered simply remove the screen from the mount rotate the screen mount 180 degrees and reattach. After you know the top and bottom of your screen mount and its orientation you can then proceed to attach the LH and RH side mounts. Most of the holes in the brackets are slotted and allow some adjustment.
Optional parts I used in my build:
Metra 70-7901 Radio Wiring... https://www.amazon.com/dp/B0002BETW2
UWAYKEY
Bluetooth Amplifier Board: https://www.amazon.com/dp/B08HQSXNST
kuman
Breadboard Jumper Wires: https://www.amazon.com/dp/B01L6THEE8
Adafruit 4079 2 x 20
Socket Riser: https://www.amazon.com/dp/B07PPD25MK
CarPiHat: https://www.tindie.com/products/tjd/carpihat-raspberry-pi-car-interface-pcb/
Attribution: This item is a remix of the two below files along with some original content.
https://www.thingiverse.com/thing:2543354
Miata Stereo Universal Double DIN Head Unit Mount
by EMRL September 19, 2017
and
https://www.thingiverse.com/thing:1503651
Raspberry Pi 7"" Touchscreen Super Awesome Portable
by DrVegetable April 19, 2016" https://3dcarparts.org/library/1997/Mazda/Miata/double-din-mount https://r2-upload.3dcarparts.workers.dev/file/parts/b588f164-bd9e-4590-9d33-abe2a23d1158/images/double-din-mount-1_1766015883199_apjbxm.jpg in_stock 17.40 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1997/Mazda/Miata/double-din-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eb65d718-0d25-4b26-892d-7b898643d64e 1985 Toyota Celica Supra Trim Piece "Had to Replace this trim piece So i made it.
PLA
100% infill
but factory is ABS" https://3dcarparts.org/library/1985/Toyota/Celica%20Supra/trim-piece https://r2-upload.3dcarparts.workers.dev/file/parts/eb65d718-0d25-4b26-892d-7b898643d64e/images/trim-piece-1_1766015859291_8wmxqr.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1985/Toyota/Celica%20Supra/trim-piece?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-11925c9b-671b-4584-8b09-f6888b1dcc90 1986 Toyota Celica Supra Whisker Clip "Taken from: https://pinshape.com/items/16693-3d-printed-82-86-toyota-celica-supra-whisker-clip
I wanted to share this design with everyone since it's free. Give credit to Chris Halliday" https://3dcarparts.org/library/1986/Toyota/Celica%20Supra/whisker-clip https://r2-upload.3dcarparts.workers.dev/file/parts/11925c9b-671b-4584-8b09-f6888b1dcc90/images/whisker-clip-1_1766015805053_x2s7da.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1986/Toyota/Celica%20Supra/whisker-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-500a9b41-9e66-46b3-a1e7-7bd9a471fe0f 1988 Toyota Supra HVAC Air Con Slider Toyota Supra Mk3 A70 air conditioning slider component for interior climate control system. https://3dcarparts.org/library/1988/Toyota/Supra/hvac-air-con-slider https://r2-upload.3dcarparts.workers.dev/file/parts/500a9b41-9e66-46b3-a1e7-7bd9a471fe0f/images/hvac-air-con-slider-1_1766014778059_4oom8g.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1988/Toyota/Supra/hvac-air-con-slider?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4140ce35-1f7f-4285-9386-758111392644 1984 Toyota Supra Dashboard Vent A basic vent replacement for the MK2 Supra that can be 3M taped or glued in place of the original vents if they are too brittle due to age. Replacing the stock vents is complicated since the whole dashboard has to be replaced. https://3dcarparts.org/library/1984/Toyota/Supra/dashboard-vent https://r2-upload.3dcarparts.workers.dev/file/parts/4140ce35-1f7f-4285-9386-758111392644/images/dashboard-vent-1_1766014746317_b342yx.jpg in_stock 8.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1984/Toyota/Supra/dashboard-vent?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d4c6957b-3c68-4bc5-a85c-f73fae3d3178 1993 Toyota Supra Cover Rear Differential Oil Cooler OEM part number 41883-14010. Split into 2 parts for easier 3D printing without support. Design not tested by creator. https://3dcarparts.org/library/1993/Toyota/Supra/cover-rear-differential-oil-cooler https://r2-upload.3dcarparts.workers.dev/file/parts/d4c6957b-3c68-4bc5-a85c-f73fae3d3178/images/cover-rear-differential-oil-cooler-1_1766014677096_ns2ecx.jpg in_stock 24.26 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories cooling-system https://3dcarparts.org/library/1993/Toyota/Supra/cover-rear-differential-oil-cooler?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-40c562e4-f3ed-4c8e-8b7c-09203970fb35 2010 Toyota Generic Toyota/Lexus Hood Liner Clip The clips that hold the acoustic liner to the hood of Toyota and Lexus vehicles are very difficult to remove without damaging the clips themselves. This is a printable replacement for these clips. https://3dcarparts.org/library/2010/Toyota/Generic%20Toyota%2FLexus/hood-liner-clip https://r2-upload.3dcarparts.workers.dev/file/parts/40c562e4-f3ed-4c8e-8b7c-09203970fb35/images/hood-liner-clip-1_1766014628982_tyuo1t.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2010/Toyota/Generic%20Toyota%2FLexus/hood-liner-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e9a731d3-b268-462a-b2c2-e8e127482396 1986 Toyota Supra Radiator Pedestal Bushing This is a direct fitment radiator lower mount bushing for the mk3 Supra. It likely fits other Toyotas of similar age. Radiator mount bushings are pretty close to all the same roughly. This is to be printed using TPU. Melting point of TPU is well above the normal radiator operating temperatures of 180-220f. I have test fitted it into the frame but have yet to install the radiator or print it in TPU yet. I started with ABS to test fit. So I don't have any print recommendations for the bushings other than I would imagine the infill will likely need to be high due to the TPU softness. I plan on trying 30% first and may end up as high as 80%, I don't know to be honest. https://3dcarparts.org/library/1986/Toyota/Supra/radiator-pedestal-bushing https://r2-upload.3dcarparts.workers.dev/file/parts/e9a731d3-b268-462a-b2c2-e8e127482396/images/radiator-pedestal-bushing-1_1766014590816_k2sas5.jpg in_stock 15.73 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories cooling-system https://3dcarparts.org/library/1986/Toyota/Supra/radiator-pedestal-bushing?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6aadef49-182e-4f8d-929c-033f54148853 1986 Toyota Supra Cam Gear Locker A simple cam gear locker with a handle, designed to fit snugly for Toyota Supra engine applications. https://3dcarparts.org/library/1986/Toyota/Supra/cam-gear-locker https://r2-upload.3dcarparts.workers.dev/file/parts/6aadef49-182e-4f8d-929c-033f54148853/images/cam-gear-locker-1_1766014517560_1kj9if.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library/1986/Toyota/Supra/cam-gear-locker?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b22cac9b-d81f-4f6c-974a-4b48dca392cf 1986 Toyota Supra Shifter Boot Frame I did a manual transmission swap in my MK3 Supra and needed to install a shifter boot. As I don't have the original bracket, I designed one which can be installed without the need to remove the console. Printed in PETG as PLA will surely melt in there! https://3dcarparts.org/library/1986/Toyota/Supra/shifter-boot-frame https://r2-upload.3dcarparts.workers.dev/file/parts/b22cac9b-d81f-4f6c-974a-4b48dca392cf/images/shifter-boot-frame-1_1765948451029_6n9gi8.jpg in_stock 18.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1986/Toyota/Supra/shifter-boot-frame?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2794ef8f-1a09-4d75-96c5-01d1e0c3d247 2005 Toyota Camry Seat Drive Gear "Diameter 23 mm, 20 teeth, hole diameter 9 mm, height 26.5 mm.
Suitable for multiple Toyota and Lexus models, including Toyota 4runner, Alphard, Vellfire, Avensis, Camry, Highlander, Hilux, Land Cruiser, and Lexus ES300, ES330, GX470, RX330, RX350. Made by 3D printing from durable and wear-resistant PETG plastic." https://3dcarparts.org/library/2005/Toyota/Camry/seat-drive-gear https://r2-upload.3dcarparts.workers.dev/file/parts/2794ef8f-1a09-4d75-96c5-01d1e0c3d247/images/seat-drive-gear-1_1765255143606_v1os4y.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Toyota/Camry/seat-drive-gear?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ece52317-0187-4a9d-9a19-a02bb2835292 Toyota V6 Engines Rear Main Seal Installer Tool Rear main seal installer tool for Toyota V6 engines without hybrid vehicles (w/o HV). Used for installing rear main crankshaft seals. https://3dcarparts.org/library?q=Rear+Main+Seal+Installer+Tool https://r2-upload.3dcarparts.workers.dev/file/parts/ece52317-0187-4a9d-9a19-a02bb2835292/images/center-console-arm-rest-hinge-2-1_1765255011329_sedk5q.jpg in_stock 31.85 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories specialty-tools https://3dcarparts.org/library?q=Rear+Main+Seal+Installer+Tool&utm_source=google-shopping&utm_medium=feed
3dcarparts-part-103a31c1-e625-4c2b-9d36-08084ddd216f 2007 Toyota Corolla Center Console Arm Rest Hinge The hinge for the arm rest of the center console on my 2007 Corolla broke, so I redesigned and printed a replacement that works like new. Not sure which Toyota models this will fit, so I attached a photo of the part that broke for reference. Pretty sure almost every recent Corolla uses this, maybe Camry but don't have one to reference. Hope this helps someone out there. https://3dcarparts.org/library/2007/Toyota/Corolla/center-console-arm-rest-hinge https://r2-upload.3dcarparts.workers.dev/file/parts/103a31c1-e625-4c2b-9d36-08084ddd216f/images/center-console-arm-rest-hinge-1_1765254999465_mkcmdu.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2007/Toyota/Corolla/center-console-arm-rest-hinge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3166a03b-14f6-4cdc-8c8b-16f0e5ed719b 1990 Toyota Camry Grill Clamp Replacement clips for the Toyota Camry grill, modeled as an exact replica. ABS material is highly recommended for this application due to heat resistance. https://3dcarparts.org/library/1990/Toyota/Camry/grill-clamp https://r2-upload.3dcarparts.workers.dev/file/parts/3166a03b-14f6-4cdc-8c8b-16f0e5ed719b/images/grill-clamp-1_1765254981273_ukp1zb.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Toyota/Camry/grill-clamp?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3ccd21a3-a1ba-4931-ad2d-88b7c3fd8e9d 2008 Toyota Camry Aux to USB adapter 2-USB adapter to replace original AUX adapter. It will fit Toyota Camry 2006 - 2011. Comes from 3rd party Android Stereo for Camry. https://3dcarparts.org/library/2008/Toyota/Camry/aux-to-usb-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/3ccd21a3-a1ba-4931-ad2d-88b7c3fd8e9d/images/aux-to-usb-adapter-1_1765254961418_t7w8w4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories electrical https://3dcarparts.org/library/2008/Toyota/Camry/aux-to-usb-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2cef86e3-c2d5-4b7a-a862-0b3cd1f2b46f 2012 Toyota Camry USB Switch Cover I remixed this cover from a blank version and added a custom USB port cutout. Recommended to secure with hot glue after installation. https://3dcarparts.org/library/2012/Toyota/Camry/usb-switch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/2cef86e3-c2d5-4b7a-a862-0b3cd1f2b46f/images/usb-switch-cover-1_1765254900968_zhvs3m.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2012/Toyota/Camry/usb-switch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3c447b0b-b05c-4f8c-be02-60fbfdcbabdc 1994 Toyota Camry Radio Knob This is a replacement radio knob for the 1992-1996 Toyota Camry factory radio. These knobs are designed for bass/treble and balance/fade adjustments. They are prone to breaking and often go missing. Printed in PLA, two knobs are needed. The design includes knurled heads to extend from the faceplate, allowing adjustment levels when the switch is in the inward position. https://3dcarparts.org/library/1994/Toyota/Camry/radio-knob https://r2-upload.3dcarparts.workers.dev/file/parts/3c447b0b-b05c-4f8c-be02-60fbfdcbabdc/images/radio-knob-1_1765254864566_41g9i2.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1994/Toyota/Camry/radio-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3516721f-1ddf-4587-9a5b-597d32855a99 2007 Toyota Camry Parking Sensor Holder Generic Parking Sensor Holder For Toyota Camry 40 (Japan) https://3dcarparts.org/library/2007/Toyota/Camry/parking-sensor-holder https://r2-upload.3dcarparts.workers.dev/file/parts/3516721f-1ddf-4587-9a5b-597d32855a99/images/parking-sensor-holder-1_1765254841534_8m1s8p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Toyota/Camry/parking-sensor-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2ae0dd17-86e8-4979-a151-aa6d0b14d030 1998 Toyota Camry Driver's Side Sun Visor Extension "A replacement driver's side sun visor extension for a 1998 Toyota Camry.
Needs some sanding and rounding off of corners on the top and bottom to slide freely." https://3dcarparts.org/library/1998/Toyota/Camry/drivers-side-sun-visor-extension https://r2-upload.3dcarparts.workers.dev/file/parts/2ae0dd17-86e8-4979-a151-aa6d0b14d030/images/drivers-side-sun-visor-extension-1_1765254698314_s5ifsm.jpg in_stock 8.36 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1998/Toyota/Camry/drivers-side-sun-visor-extension?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6aa8f228-9aad-4d75-9077-af57e4e0ea70 2005 Toyota Camry Windshield Washer Fluid Top Cap for windshield washer fluid container. Made for 2005 Toyota Camry but may fit other Toyota models. https://3dcarparts.org/library/2005/Toyota/Camry/windshield-washer-fluid-top https://r2-upload.3dcarparts.workers.dev/file/parts/6aa8f228-9aad-4d75-9077-af57e4e0ea70/images/windshield-washer-fluid-top-1_1765254681283_h66hn5.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories cooling-system https://3dcarparts.org/library/2005/Toyota/Camry/windshield-washer-fluid-top?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-1696987f-d7c6-4ae6-b8a4-b8e6f2077603 2005 Toyota Camry Glove Box Latch Lock The part that breaks if you don't close the glove box carefully (too quickly). I designed this part to fit M4x12 bolts that will hold the pulls. The bolts can be purchased from an AliExpress link. https://3dcarparts.org/library/2005/Toyota/Camry/glove-box-latch-lock https://r2-upload.3dcarparts.workers.dev/file/parts/1696987f-d7c6-4ae6-b8a4-b8e6f2077603/images/glove-box-latch-lock-1_1765254660989_mmrt55.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2005/Toyota/Camry/glove-box-latch-lock?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-853744ec-ba0e-4e72-b2d3-65a767f54790 2006 Toyota Camry Glovebox Latch Clips "The glovebox never closed properly in my Aurion. The previous owner must've taken out the clips at some point to remove screws and never reinstalled them.
I could only find beige versions online for sale, They also had larger holes than the latch, so I would imagine the latch is quite sloppy in the hole.
This contains Left and Right clip STL files, They are different sizes so you can't just mirror one.
The clips print fine at .2mm, printed at 100mm/s with 70mm/s walls. 2 layer top and bottom. with accelleration at 1000mm/s on my ender 3.
I did print the final versions that I'm using at .1mm with much slower speeds, as the overhangs on the clips don't droop. Aswell as the fact that it looks much smoother aestheticly. The .2mm versions do fit and snap in correctly, if you're not worried about the aesthetics you don't need to print fine or slow.
There are a few little lips in the models as they were made in tinkercad and I couldn't be bothered cleaning them all up. They're such small lines they don't seem to print anyway." https://3dcarparts.org/library/2006/Toyota/Camry/glovebox-latch-clips https://r2-upload.3dcarparts.workers.dev/file/parts/853744ec-ba0e-4e72-b2d3-65a767f54790/images/glovebox-latch-clips-1_1765254642630_t3w332.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2006/Toyota/Camry/glovebox-latch-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-39185d06-240c-4d96-97b5-20a54310effd 2015 Toyota Camry Boot Release Pull Tag Replacement internal emergency release pull tag for the trunk/boot of a 2015 Toyota Camry Hybrid (probably suits most other cars) https://3dcarparts.org/library/2015/Toyota/Camry/boot-release-pull-tag https://r2-upload.3dcarparts.workers.dev/file/parts/39185d06-240c-4d96-97b5-20a54310effd/images/boot-release-pull-tag-1_1765254582160_x8w9xp.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2015/Toyota/Camry/boot-release-pull-tag?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb897b76-f6e4-4c22-afaf-bfd26e603b9a 1979 Datsun 280ZX Sun Visor Clip A replacement sun visor clip designed to replace the brittle original plastic part. Compatible with Datsun 280ZX. Can be printed with ASA or PETG material and should withstand the heat inside a parked car. https://3dcarparts.org/library/1979/Datsun/280ZX/sun-visor-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bb897b76-f6e4-4c22-afaf-bfd26e603b9a/images/sun-visor-clip-1_1765254565431_p8svcq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1979/Datsun/280ZX/sun-visor-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7080d8b3-4ac1-4341-934d-a962e476ae05 2017 Lexus ES 300h Speaker Adapter "This is an adapter for 6""x9"" speakers compatible with the 2017 Lexus ES 300h and 350 models. The adapter was designed to fit a 254mm x 254mm print bed and can be used with specific connector adapters for easy installation." https://3dcarparts.org/library/2017/Lexus/ES%20300h/2017-lexus-es-300h-speaker-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/7080d8b3-4ac1-4341-934d-a962e476ae05/images/speaker-adapter-1_1765254549019_fhhh1l.jpg in_stock 29.94 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2017/Lexus/ES%20300h/2017-lexus-es-300h-speaker-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3858fb49-3a74-4be2-909f-df6fea074048 1995 Toyota Tercel Door Trim Clip A specialized clip used to hold the weather-stripping and upper interior door trim fascia to the metal panel for Toyota vehicles from 1990-1995. These clips are critical for preventing window glass rattling and are often difficult to replace. This 3D printable version provides an easy solution for mechanics and Toyota owners. https://3dcarparts.org/library/1995/Toyota/Tercel/door-trim-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3858fb49-3a74-4be2-909f-df6fea074048/images/door-trim-clip-1_1765254534330_ezm1dx.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1995/Toyota/Tercel/door-trim-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c5149942-4e89-41b2-b48e-58c8057b5959 2008 Scion xB Grab Handle Bracket This is a replacement grab handle bracket for my 2008 Scion xB should also fit the same year 2008 Toyota Camry. I could've bought a new handle for about 30 bucks that included the bracket. However, I figured this would be a good opportunity to learn some of the basics of Fusion 360. I've included the Fusion file if you would like to modify it. I printed the prototypes on on my Ender 3 Pro in PLA and the final on my Elegoo Mars Pro in ABS like resin. Works great! The resin I used seems to handle hot cars much better. https://3dcarparts.org/library/2008/Scion/xB/grab-handle-bracket https://r2-upload.3dcarparts.workers.dev/file/parts/c5149942-4e89-41b2-b48e-58c8057b5959/images/grab-handle-bracket-1_1765254504453_i9prsn.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2008/Scion/xB/grab-handle-bracket?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-60a6cfd0-19b2-4f28-b94d-b8e988574aee 2022 Toyota Tundra Rear Dash Cam Clip Mount Rear dash cam clip mount for 2022+ Tundra with full rear sliding window. Clips on to black trim. Just pull trim down, insert clip, then push trim back into place. Print in PETG to avoid warping in the sun. https://3dcarparts.org/library/2022/Toyota/Tundra/rear-dash-cam-clip-mount https://r2-upload.3dcarparts.workers.dev/file/parts/60a6cfd0-19b2-4f28-b94d-b8e988574aee/images/rear-dash-cam-clip-mount-1_1765254389663_fjc3mj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2022/Toyota/Tundra/rear-dash-cam-clip-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-564b8865-78f7-4d65-aab5-4608d1f0e111 1989 Toyota Camry Brightness Control Knob This is to replace the instrument panel brightness control knob in a 1989 Toyota Camry. It can be found on the left of where the steering wheel attaches to the rest of the car. I only took into consideration the shape of the peg it had to fit onto and did not try to make this an accurate replica of the original vehicle knob. I used Tinkercad since I no longer have access to CATIA after graduating. The part is simple, consisting of just a cylinder and a square hole, so advanced CAD capabilities were not required. https://3dcarparts.org/library/1989/Toyota/Camry/brightness-control-knob https://r2-upload.3dcarparts.workers.dev/file/parts/564b8865-78f7-4d65-aab5-4608d1f0e111/images/brightness-control-knob-1_1765254350367_kxlqas.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Toyota/Camry/brightness-control-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5cb1dcea-22f8-484c-9a19-84109684ccb1 1989 Toyota Camry Interior Dash Plug Goes into slot for extra buttons on right side of steering wheel https://3dcarparts.org/library/1989/Toyota/Camry/interior-dash-plug https://r2-upload.3dcarparts.workers.dev/file/parts/5cb1dcea-22f8-484c-9a19-84109684ccb1/images/interior-dash-plug-1_1765253992373_ku7ykc.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1989/Toyota/Camry/interior-dash-plug?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54a518a6-833a-4ed7-a008-6a829c82040c 2004 Toyota All Models Toggle Switch Holder This is a 12mm shaft toggle switch holder for Toyota Switch blank. It fits the tall size Toyota Switch blank (40x22 mm). Print on the flat backside with support required. Updated version improves fit, makes lock nut tightening easier, and includes ON-OFF text. Compatible with multiple Toyota models including Land Cruiser, FJ Cruiser, Land Cruiser Prado, 4Runner, Tacoma, Tundra, Hilux, RAV4, Venza, Hiace, Fortuner, Sequoia, Highlander, Corolla, and Camry. https://3dcarparts.org/library/2004/Toyota/All%20Models/toggle-switch-holder-2 https://r2-upload.3dcarparts.workers.dev/file/parts/54a518a6-833a-4ed7-a008-6a829c82040c/images/toggle-switch-holder-2-1_1765253891302_8mmfhw.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Toyota/All%20Models/toggle-switch-holder-2?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ac7fc7d2-6a0c-4cff-8109-dcbfedbf0ec3 2008 Mini Cooper S Handbrake Button This is a replacement handbrake button that fits the R56 manual transmission Mini Cooper S (and likely other manual Mini models). My button broke apart shortly after buying the car and there were zero replacement options aside from buying a new handbrake assembly. I printed this out of PETG and it works flawlessly, feels much better than the original (flatter top = better distribution of pressure). Just slide it on with the notch on top and push in the handbrake button to secure in place. https://3dcarparts.org/library/2008/Mini/Cooper%20S/handbrake-button https://r2-upload.3dcarparts.workers.dev/file/parts/ac7fc7d2-6a0c-4cff-8109-dcbfedbf0ec3/images/handbrake-button-1_1765248826792_t5e2ic.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Mini/Cooper%20S/handbrake-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-92378ac5-24a8-449e-a917-f3df906b8d02 2004 Audi A4 Window Crank Replacement window crank for Audi A4 B6. Requires some original parts for the handle and original screw. May also fit other Audi vehicles or Volkswagens. https://3dcarparts.org/library/2004/Audi/A4/window-crank https://r2-upload.3dcarparts.workers.dev/file/parts/92378ac5-24a8-449e-a917-f3df906b8d02/images/window-crank-1_1760677740237_tu512d.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2004/Audi/A4/window-crank?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e2e2582c-e516-4df5-ab30-40a63127ebf8 1989 Audi Coupe Roof Light Button The roof light button for an old Audi car that was difficult to find replacement parts for. Contains 3 parts that need to be assembled with a spring and copper part. Original Audi part number 443947105. Compatible with multiple Audi models from 1988-1997, including Coupe, 80/S2/RS2, 100/200, A6/S6, and V8 models. https://3dcarparts.org/library/1989/Audi/Coupe/roof-light-button https://r2-upload.3dcarparts.workers.dev/file/parts/e2e2582c-e516-4df5-ab30-40a63127ebf8/images/roof-light-button-1_1760677713599_zem20z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/1989/Audi/Coupe/roof-light-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-2a645808-26da-4e1b-b763-e7768b89dc44 2012 Audi A4 Dash Tweeter Mounts This is to replace the factory tweeters in the dash with an aftermarket tweeter. Bolts down using the factory screws, has slight angle to prevent too much reflection of the windscreen. Factory grills fit back into place. https://3dcarparts.org/library/2012/Audi/A4/dash-tweeter-mounts https://r2-upload.3dcarparts.workers.dev/file/parts/2a645808-26da-4e1b-b763-e7768b89dc44/images/dash-tweeter-mounts-1_1760677687334_hop71w.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Audi/A4/dash-tweeter-mounts?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-cf4093d8-cb5c-4f9f-ad0b-e161f0da7ccf 1990 Audi 80/Cabrio Cup Holder This is a double cup holder for Audi 80/Cabriolet/90 etc. This fits inside the center console. Print in PETG for heat resistance. https://3dcarparts.org/library/1990/Audi/80%2FCabrio/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/cf4093d8-cb5c-4f9f-ad0b-e161f0da7ccf/images/cup-holder-1_1760677647050_kprvzm.jpg in_stock 28.24 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Audi/80%2FCabrio/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-b1756e27-ac53-4806-840c-d9d7fd7e5b0a 1996 Audi A4 Front Wiper Cover Cap Audi A4 B5 front wiper cover for the nut https://3dcarparts.org/library/1996/Audi/A4/front-wiper-cover-cap https://r2-upload.3dcarparts.workers.dev/file/parts/b1756e27-ac53-4806-840c-d9d7fd7e5b0a/images/front-wiper-cover-cap-1_1760677626107_9w8l0k.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1996/Audi/A4/front-wiper-cover-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-09f47656-e0ee-4f8a-a547-f1cbe1c1cf58 2002 Mini Cooper Boost Gauge & Ultra Gauge Mount Quick boost and ultra gauge mount for R53 tachometer https://3dcarparts.org/library/2002/Mini/Cooper/boost-gauge-ultra-gauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/09f47656-e0ee-4f8a-a547-f1cbe1c1cf58/images/boost-gauge-ultra-gauge-mount-1_1760676076776_b76dar.jpg in_stock 20.87 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Mini/Cooper/boost-gauge-ultra-gauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-213f36bc-f42f-404c-8bc3-ae4d298dd5ab 2007 Jeep Grand Cherokee Rear Wiper Cover Cap Rear wiper pivot cover. This part was created to replace a broken cap, and it is painted in flat black for a great match. https://3dcarparts.org/library/2007/Jeep/Grand%20Cherokee/rear-wiper-cover-cap https://r2-upload.3dcarparts.workers.dev/file/parts/213f36bc-f42f-404c-8bc3-ae4d298dd5ab/images/rear-wiper-cover-cap-1_1760676056363_n3nsix.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Grand%20Cherokee/rear-wiper-cover-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-824deceb-4f55-4921-a6db-d1cc5af5fcb7 2004 Jeep Wrangler Shift Boot Bezel Replacement shift boot bezel for 1997-2004 Jeep Wrangler. https://3dcarparts.org/library/2004/Jeep/Wrangler/shift-boot-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/824deceb-4f55-4921-a6db-d1cc5af5fcb7/images/shift-boot-bezel-1_1760675849144_t3qzt9.jpg in_stock 16.95 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Jeep/Wrangler/shift-boot-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-54e05a97-558e-41d4-8303-d6877351eb92 2004 Jeep Wrangler Cup Holder Fits TJ and JK Wrangler models. Designed to hold most large size drinks. Installation tip: Rotate model so tab is at the top. Requires appropriate nut and bolt for recessed mounting area. https://3dcarparts.org/library/2004/Jeep/Wrangler/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/54e05a97-558e-41d4-8303-d6877351eb92/images/cup-holder-1_1760675835013_lz02jc.jpg in_stock 26.30 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Jeep/Wrangler/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-247d0267-b51e-4383-8ba4-30c251e3708d 2006 Jeep Rubicon AC Knob Replacement climate control knobs. Modeled from 2006 Rubicon knobs. Update 3-11-15: Added versions without the inside slots. https://3dcarparts.org/library/2006/Jeep/Rubicon/ac-knob https://r2-upload.3dcarparts.workers.dev/file/parts/247d0267-b51e-4383-8ba4-30c251e3708d/images/ac-knob-1_1760675813204_yf748i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Jeep/Rubicon/ac-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-bb8b17ff-1324-47c9-9fa0-19aed06a6f15 1987 Jeep Wrangler Door Lock Latch Clip Replacement clip for holding door push rods in place. These clips can break in cold weather or with age. Designed to fit Jeep YJ models and matches Mopar part number 4658677. https://3dcarparts.org/library/1987/Jeep/Wrangler/door-lock-latch-clip https://r2-upload.3dcarparts.workers.dev/file/parts/bb8b17ff-1324-47c9-9fa0-19aed06a6f15/images/door-lock-latch-clip-1_1760675799607_hq307p.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1987/Jeep/Wrangler/door-lock-latch-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-44ac5b0c-5395-47ae-a0d7-394ad927039c 2002 Jeep Wrangler Switch Panel Custom Switch Panel for a 2002 Jeep TJ. I designed it my Junior year of high school, before I ever took a course in CAD; so be aware, the parts are an un-optimized mess. If I were you, I would immediately convert the IPT's to a solid body and start from there, maybe keep the IPT's around if you need to reference any measurements. Other than that, I'm pretty happy with how the project turned out. It fits great. I do wish that I had angled the switches more towards the driver, but with the Jeep being a manual, I was worried about accidentally hitting the switches if I extruded them out too far. But yeah that's about it. I would recommend printing in ABS if possible due to how hot it can get in a car with all the windows up. Just a suggestion :) https://3dcarparts.org/library/2002/Jeep/Wrangler/switch-panel https://r2-upload.3dcarparts.workers.dev/file/parts/44ac5b0c-5395-47ae-a0d7-394ad927039c/images/switch-panel-1_1760675784810_o6wslm.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Jeep/Wrangler/switch-panel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-80a42469-5861-48b4-a4fd-9af276722730 2007 Jeep Wrangler Door Handle Insert These inserts fit inside door handles on a Jeep JK. You only need double-sided tape to install, potentially saving $60.00. Available as separate files for all 3 doors. https://3dcarparts.org/library/2007/Jeep/Wrangler/door-handle-insert https://r2-upload.3dcarparts.workers.dev/file/parts/80a42469-5861-48b4-a4fd-9af276722730/images/door-handle-insert-1_1760675756965_zgwmz9.jpg in_stock 14.76 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Jeep/Wrangler/door-handle-insert?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f88a2ce9-e8d5-4f71-8f91-80c2aababd46 1997 Jeep Wrangler Center Console Tray A 3D printed tray designed specifically for the 1997 Jeep TJ Wrangler. The tray features a small fillet under the lip to enable printing without supports. It may require a test print to check fit, with potential adjustments to percentage fit. Recommended to be printed in PET material with multiple shells and low infill. https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-tray https://r2-upload.3dcarparts.workers.dev/file/parts/f88a2ce9-e8d5-4f71-8f91-80c2aababd46/images/center-console-tray-1_1760675682407_xqlddk.jpg in_stock 21.43 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1997/Jeep/Wrangler/center-console-tray?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-96ef6084-6c04-49b9-aa54-a3a7fb22bd14 2004 Mini Cooper Cup Holder Adapter Redesigned from ground up, I removed the bottoms from both the cup holder and the adapter so you do not need any support material. The adapter is also designed not to need any too. A thin travel mug rests on the carpet, designed a riser to go inside to raise up short mugs. https://3dcarparts.org/library/2004/Mini/Cooper/cup-holder-adapter https://r2-upload.3dcarparts.workers.dev/file/parts/96ef6084-6c04-49b9-aa54-a3a7fb22bd14/images/cup-holder-adapter-1_1760675194996_blpw9d.jpg in_stock 22.63 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Mini/Cooper/cup-holder-adapter?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-3ee273c9-7fc6-4ffd-a246-0c53e56bb06d 2007 Mini Cooper Light Ring / Bezel Clip This is a replacement clip for the bezel that goes around the headlight on an R57 Mini Cooper S https://3dcarparts.org/library/2007/Mini/Cooper/light-ring-bezel-clip https://r2-upload.3dcarparts.workers.dev/file/parts/3ee273c9-7fc6-4ffd-a246-0c53e56bb06d/images/light-ring-bezel-clip-1_1760675175508_68j3z4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2007/Mini/Cooper/light-ring-bezel-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5cd05adb-a494-4e62-913c-a8d4a735b077 2005 Mini Cooper Dash Cam Mount "This provides a mount for dash cams with a 1/4"" x 20tpi mounting thread. Compatible with Mobius action camera and any camera with standard tripod thread. Attaches to the bottom of the rain sensor cover using double-sided foam tape. Mounting bolt (1/4 x 20) not included." https://3dcarparts.org/library/2005/Mini/Cooper/dash-cam-mount https://r2-upload.3dcarparts.workers.dev/file/parts/5cd05adb-a494-4e62-913c-a8d4a735b077/images/dash-cam-mount-1_1760675155578_fnb69t.jpg in_stock 10.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mini/Cooper/dash-cam-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-50c23718-dc3d-46a1-bc80-382b09ae0870 2003 Mini Cooper Navigation Knob Replacement part for 2003 Mini Cooper stock navigation knob https://3dcarparts.org/library/2003/Mini/Cooper/navigation-knob https://r2-upload.3dcarparts.workers.dev/file/parts/50c23718-dc3d-46a1-bc80-382b09ae0870/images/navigation-knob-1_1760675070395_gzan7h.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Mini/Cooper/navigation-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-f7abbe3e-bbcb-4077-b018-05a5e2d2175e 2005 Mini Cooper Wheel Liner Clip This is a plug that replaces the OEM wheel liner clips. This is my second iteration of my design, and I will probably upload better ones at a later date. I have been replacing every one of these that I take out with my home brew design. Seems to be working well so far. https://3dcarparts.org/library/2005/Mini/Cooper/wheel-liner-clip https://r2-upload.3dcarparts.workers.dev/file/parts/f7abbe3e-bbcb-4077-b018-05a5e2d2175e/images/wheel-liner-clip-1_1760675054452_xhrxhq.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mini/Cooper/wheel-liner-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7b1115cb-8964-432e-91e1-2deb18d4dff5 2012 MINI Countryman Wheel Well Port Cover The cover for the access holes in a MINI Cooper Countryman wheel well. https://3dcarparts.org/library/2012/MINI/Countryman/wheel-well-port-cover https://r2-upload.3dcarparts.workers.dev/file/parts/7b1115cb-8964-432e-91e1-2deb18d4dff5/images/wheel-well-port-cover-1_1760675038518_hlndc2.jpg in_stock 23.62 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/MINI/Countryman/wheel-well-port-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6bac9b92-1bb8-4e63-b058-5e357ec20c54 2003 Mini Cooper Dashboard Clips Mini Cooper/Cooper S/Cabrio dashboard mounting clip. Suitable for 3D printing on Creality Ender 3 V3 SE using PLA or PETG material. Print with supports, no raft recommended. https://3dcarparts.org/library/2003/Mini/Cooper/dashboard-clips https://r2-upload.3dcarparts.workers.dev/file/parts/6bac9b92-1bb8-4e63-b058-5e357ec20c54/images/dashboard-clips-1_1760675014050_vunybs.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Mini/Cooper/dashboard-clips?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-a6339fdd-c5a5-4d60-a71a-384a64093064 2002 Mini Cooper Coolant Cap This is a coolant cap for R50 Mini Coopers. The part was 3D printed in PLA+ with 60% infill. https://3dcarparts.org/library/2002/Mini/Cooper/coolant-cap https://r2-upload.3dcarparts.workers.dev/file/parts/a6339fdd-c5a5-4d60-a71a-384a64093064/images/coolant-cap-1_1760674985004_o4l05o.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Mini/Cooper/coolant-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d2bf5509-08c4-4b5b-9907-134d23545518 2004 Mini Cooper Radio Knob Here are two different Radio Knobs for the Mini Cooper. This fits my R53 so should fit all the Mini Coopers with the same radio. You will need to reuse your metal insert no matter the design you print. I printed in PLA, but your mileage might differ. https://3dcarparts.org/library/2004/Mini/Cooper/radio-knob https://r2-upload.3dcarparts.workers.dev/file/parts/d2bf5509-08c4-4b5b-9907-134d23545518/images/radio-knob-1_1760674964189_eg7tpl.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Mini/Cooper/radio-knob?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-caef5b5c-9e2a-4f8c-81ef-1a4c2380fbdd 2005 Mini Cooper Dual Relay Holder "I've just added a set of four spotlights to the front of my Cooper S R53. This requires two relays, one for each pair and a fuse. This is designed to have two relay sockets push in from underneath and a fuse holder in the front slot.
The bracket will then bolt to the front bulkhead with two self tapping screws.
Printed in PLA, 20% infill with no supports" https://3dcarparts.org/library/2005/Mini/Cooper/dual-relay-holder https://r2-upload.3dcarparts.workers.dev/file/parts/caef5b5c-9e2a-4f8c-81ef-1a4c2380fbdd/images/dual-relay-holder-1_1760674921003_dtja1h.jpg in_stock 18.70 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mini/Cooper/dual-relay-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-18be2193-e09e-465e-8fb2-859519f0cfb6 2004 Mini Cooper Jump Start Terminal Cover Battery terminal cover for 2001 - 2006 Mini Cooper S R53. Printed in translucent red PETG. Hold lid vertical in the open position and push down to clip on to terminal base. https://3dcarparts.org/library/2004/Mini/Cooper/jump-start-terminal-cover https://r2-upload.3dcarparts.workers.dev/file/parts/18be2193-e09e-465e-8fb2-859519f0cfb6/images/jump-start-terminal-cover-1_1760674872174_m0xyih.jpg in_stock 10.90 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2004/Mini/Cooper/jump-start-terminal-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e95067f3-9e41-4296-b7a1-de24c4c6aef5 2000 Mini Cooper Wheel Centre Cap "Centre Cap for Classic Mini ""Minilite"" alloys. Suitable for RSP Cooper, Thirty, Italian Job, Mainstream Cooper etc. There are three files, a plain centre cap plus two variant covers which can be glued to the cap if required. I have also added a Mini Club Sussex logo badge, for the guys and girls in my old club." https://3dcarparts.org/library/2000/Mini/Cooper/wheel-centre-cap https://r2-upload.3dcarparts.workers.dev/file/parts/e95067f3-9e41-4296-b7a1-de24c4c6aef5/images/wheel-centre-cap-1_1760674843099_d76a7z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Mini/Cooper/wheel-centre-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-aab975b8-453e-4d90-b0a9-b2032798a2d4 2002 Mini Cooper Gauge Mount This is a mount to place a 52mm gauge beside the original revmeter of a Mini Cooper (R50/R53). https://3dcarparts.org/library/2002/Mini/Cooper/gauge-mount https://r2-upload.3dcarparts.workers.dev/file/parts/aab975b8-453e-4d90-b0a9-b2032798a2d4/images/gauge-mount-1_1760673558531_afjc5j.jpg in_stock 19.39 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Mini/Cooper/gauge-mount?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e428bbf2-bcb1-4420-b618-42f5537fb225 2013 Mini Cooper Cup Holder I tried a couple similar cupholders in my 2013 Mini Cooper S, but didn't like how they fit, either in the car's cupholders or how they fit an XL soda cup or a Yeti-style coffee cup, so I designed my own version that fits my car perfectly. The smaller cup that fits into the car's cupholders still fit a soda can. Printed in PETG. https://3dcarparts.org/library/2013/Mini/Cooper/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/e428bbf2-bcb1-4420-b618-42f5537fb225/images/cup-holder-1_1760673531917_xxox32.jpg in_stock 24.06 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2013/Mini/Cooper/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-32a03c0e-9729-49e7-afd5-f7468b13e5e7 2008 Mini Cooper Hand Brake Cover Top Designed Hand Brake cover top for my mini cooper r56 (2008), the original one was broken. Sand it, then add top coat and varnish. Use double side tape inside and press to hold it. https://3dcarparts.org/library/2008/Mini/Cooper/hand-brake-cover-top https://r2-upload.3dcarparts.workers.dev/file/parts/32a03c0e-9729-49e7-afd5-f7468b13e5e7/images/hand-brake-cover-top-1_1760383775044_rcr26j.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Mini/Cooper/hand-brake-cover-top?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-ccc88559-93d9-4bd5-9784-b503c2ba265a 2000 Porsche 996 USB Mount Button A button to replace a blank in the dash of a Porsche 996 or 986. It has an opening to mount a USB cable. I have not tried to connect a cable as I don't have one on hand and made this model on request. I can say that the button will fit as I have used a similar one I made for use with a barrel connector. The openings for the USB cable use dimensions that I'm using on other projects. The only question is if there is enough room to fit the cable from the back. You may have to trim the USB connector with an X-acto knife to fit it. There isn't room to make hollow out the back of the button without compromising the shape. https://3dcarparts.org/library/2000/Porsche/996/usb-mount-button https://r2-upload.3dcarparts.workers.dev/file/parts/ccc88559-93d9-4bd5-9784-b503c2ba265a/images/usb-mount-button-1_1760383754179_fojl5z.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Porsche/996/usb-mount-button?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-753ce145-53a3-4329-bb24-26ddd83aa0bb 2000 Porsche 986 Dash Speaker Tweeter Clip "If you're keeping the tweeters or upgrading, these clips can be brittle now the plastic is around 20 years old.
A little different (flat backed) for easier printing but matches really well." https://3dcarparts.org/library/2000/Porsche/986/dash-speaker-tweeter-clip https://r2-upload.3dcarparts.workers.dev/file/parts/753ce145-53a3-4329-bb24-26ddd83aa0bb/images/dash-speaker-tweeter-clip-1_1760383713800_qa49w3.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2000/Porsche/986/dash-speaker-tweeter-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-eaac2924-41dc-4d26-9e67-306820dc78bd 2002 Mini Cooper Mount for Ultragauge This is a mount to place the Ultragauge beside the original revmeter of a Mini Cooper. https://3dcarparts.org/library/2002/Mini/Cooper/mount-for-ultragauge https://r2-upload.3dcarparts.workers.dev/file/parts/eaac2924-41dc-4d26-9e67-306820dc78bd/images/mount-for-ultragauge-1_1760383631063_ng8bpg.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2002/Mini/Cooper/mount-for-ultragauge?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-56e9b21d-2ea6-4ffb-9472-428689b83858 2008 Porsche 911 Grill Clip "This clip supports the mesh and slats on a Porsche 997 front bumper.
The photo shows version 1 but this STL is for version 2 which is smaller and more concealed.
Use with 3mm cable ties.
2 required per side." https://3dcarparts.org/library/2008/Porsche/911/grill-clip https://r2-upload.3dcarparts.workers.dev/file/parts/56e9b21d-2ea6-4ffb-9472-428689b83858/images/grill-clip-1_1760216800120_g7bia1.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2008/Porsche/911/grill-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-d63754ac-9c5b-4b5a-ace6-452e4a1dee6f 1980 Mercedes L1513 Safety Belt Cap This is a replacement part for a safety belt cap, used on some classic Mercedes Benz buses and vans. The original part came from a Mercedes 'Kurzhauber' type bus like the 911, the LA710, and L1513. https://3dcarparts.org/library/1980/Mercedes/L1513/safety-belt-cap https://r2-upload.3dcarparts.workers.dev/file/parts/d63754ac-9c5b-4b5a-ace6-452e4a1dee6f/images/safety-belt-cap-1_1760216386398_n2ea79.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1980/Mercedes/L1513/safety-belt-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6b0e2d7b-0b3c-46b1-9797-430d56bc57be 2005 Mercedes W211 Rear Wiper Window Cover Rear window cover. In exchange for the original metal one. Stick on the glass adhesive or the sealing silicone. https://3dcarparts.org/library/2005/Mercedes/W211/rear-wiper-window-cover https://r2-upload.3dcarparts.workers.dev/file/parts/6b0e2d7b-0b3c-46b1-9797-430d56bc57be/images/rear-wiper-window-cover-1_1760216358403_9z4cgf.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Mercedes/W211/rear-wiper-window-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c7602cea-c641-461e-9bac-0e1b81e5b8a0 1990 Mercedes W123 Switch Cover "Designed this cover for my mercedes w123 because I was missing a switch in the center console.
This cover fits perfectly in the empty slot.
It can also be used for a button or custom switch or maybe a usb charger
next version will be for a usb charger" https://3dcarparts.org/library/1990/Mercedes/W123/switch-cover https://r2-upload.3dcarparts.workers.dev/file/parts/c7602cea-c641-461e-9bac-0e1b81e5b8a0/images/switch-cover-1_1760216317929_3263i4.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Mercedes/W123/switch-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-782d3902-cd77-483d-ae2d-2518ddfda400 2003 Mercedes W203 Car Clip Plastic clips specifically designed for the Mercedes W203 trunk cover. Two variants are available: an original version and an improved version that can be inserted and removed with pliers. Printed using PETG material (recommended over PLA due to potential melting). Best printed with 'Brim' plate adhesion and suitable for 5mm holes. https://3dcarparts.org/library/2003/Mercedes/W203/car-clip https://r2-upload.3dcarparts.workers.dev/file/parts/782d3902-cd77-483d-ae2d-2518ddfda400/images/car-clip-1_1760216163571_zfg9c7.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Mercedes/W203/car-clip?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-c5c81a4d-989c-4ad6-931b-5ece34a8a90b 1990 Mercedes W124 Mirror Adjustment Handle "Handle for Mercedes W124 driver side mirror adjustment. Also fits W123, W201, W126 models.
Disigned for 5mm rod." https://3dcarparts.org/library/1990/Mercedes/W124/mirror-adjustment-handle https://r2-upload.3dcarparts.workers.dev/file/parts/c5c81a4d-989c-4ad6-931b-5ece34a8a90b/images/mirror-adjustment-handle-1_1760214780951_n78t8i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1990/Mercedes/W124/mirror-adjustment-handle?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-799408f5-969d-411d-99d5-fa22593acdcd 2016 Mercedes C200d Cup Holder "I've done this model for my 2016 Mercedes C200d. Although I recommend you to print with PETG you can prınt with any material but PLA and other low glass transition temperature materials might deform due to the high temperatures in your car especially in summer. If you have any recommendations please write to me. My mail is ""alpy.yilmaz@gmail.com""." https://3dcarparts.org/library/2016/Mercedes/C200d/cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/799408f5-969d-411d-99d5-fa22593acdcd/images/cup-holder-1_1760207664206_ovxou0.jpg in_stock 29.97 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2016/Mercedes/C200d/cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-35ed7206-85d9-46c3-a6e7-8a0555dde3c6 2009 Mercedes CLK 320 Vanagon Center Cap "This is a work in progress.
Wheel center cap for the 7 spoke 16x7 Mercedes CLK 320 wheel (Mercedes part# 2094010202). This cap should fit most Mercedes wheels as well as some VW and Audi. It is designed for use on VW Vanagons to clear the front grease caps and rear axle nuts.
I designed it to (hopefully) print without the need for supports. The VW logo and the face of the cap have 2 small alignment holes to aid in assembly." https://3dcarparts.org/library/2009/Mercedes/CLK%20320/vanagon-center-cap https://r2-upload.3dcarparts.workers.dev/file/parts/35ed7206-85d9-46c3-a6e7-8a0555dde3c6/images/vanagon-center-cap-1_1760207556085_thhxa2.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2009/Mercedes/CLK%20320/vanagon-center-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-65005964-1b03-433f-a014-4f6c5cb3caa8 2016 Mercedes C220 Headlight Cap Mercedes C220 Headlight Cap (2012- ?) Advantage (H7 bulbs) https://3dcarparts.org/library/2016/Mercedes/C220/headlight-cap https://r2-upload.3dcarparts.workers.dev/file/parts/65005964-1b03-433f-a014-4f6c5cb3caa8/images/headlight-cap-1_1760205232929_wq00yo.jpg in_stock 12.52 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories lighting https://3dcarparts.org/library/2016/Mercedes/C220/headlight-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-08e525f6-53b8-4a38-ab10-06341466a2a6 2005 Nissan 350Z center cup holder I designed this for a friend. He owns a 2005 350Z. The single (shotty) cupholder on the dash was not enough so he asked for a center console one. This is two cup holder. The driver side one is square to hold odd shaped bottles or a wallet or whatever. The piece is machine fit so it will require a rubber mallet to install. The center console will still function and close with this. https://3dcarparts.org/library/2005/Nissan/350Z/center-cup-holder https://r2-upload.3dcarparts.workers.dev/file/parts/08e525f6-53b8-4a38-ab10-06341466a2a6/images/center-cup-holder-1_1760047997641_q06piv.jpg in_stock 34.12 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350Z/center-cup-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-371cbf25-1b53-4a62-8b41-d9e5a5fdf031 2005 Nissan 350z din bezel double bezel for nissan 350z 06 for aftermarket chinese double din radios https://3dcarparts.org/library/2005/Nissan/350z/din-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/371cbf25-1b53-4a62-8b41-d9e5a5fdf031/images/din-bezel-1_1760047827737_8xzm0j.jpg in_stock 9.35 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350z/din-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-7437d6bc-7c3c-4f0e-9350-a9e07ba85bc0 2005 Nissan 350z radio bezel "Radio : https://amzn.eu/d/g0M3eyD
Switch: https://amzn.eu/d/ilUIU88
Oldschool 52mm: https://amzn.eu/d/8b81rVd
Thermometer: https://amzn.eu/d/66TaGei
Mikrofaserstoff: https://amzn.eu/d/aRglpKH" https://3dcarparts.org/library/2005/Nissan/350z/radio-bezel https://r2-upload.3dcarparts.workers.dev/file/parts/7437d6bc-7c3c-4f0e-9350-a9e07ba85bc0/images/radio-bezel-1_1760047742375_4vqkwb.jpg in_stock 23.54 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350z/radio-bezel?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-0689dc91-56bf-467d-933a-947cc20ff855 2005 Nissan 350z Clip Centre Pin Recommended to print with high fill and thin layers in ABS or other strong material. The very top bit requires support. https://3dcarparts.org/library/2005/Nissan/350z/clip-centre-pin https://r2-upload.3dcarparts.workers.dev/file/parts/0689dc91-56bf-467d-933a-947cc20ff855/images/clip-centre-pin-1_1760047676598_0c2eio.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350z/clip-centre-pin?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4dd6daa2-6c92-45f2-bd26-5eafbeca475f 2006 Nissan 350Z center console gauge panel - replaces cubby storage "This is a replacement panel for the 350Z center console. It allows additional 3 gauges as well as relocation of the hazzard switch and the cigarette lighter from the lower dash. I've created it for my track car conversion, since most of the lower dash was being removed. Accepts up to 60mm gauges. It's a ""good enough"" design, will need some shims for the hazzard switch mount and drilling of the mounting tabs for screws.
For other layouts check out: https://www.thingiverse.com/thing:4247633" https://3dcarparts.org/library/2006/Nissan/350Z%20center/console-gauge-panel-replaces-cubby-storage https://r2-upload.3dcarparts.workers.dev/file/parts/4dd6daa2-6c92-45f2-bd26-5eafbeca475f/images/console-gauge-panel-replaces-cubby-storage-1_1760047610620_7ciwx6.jpg in_stock 28.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Nissan/350Z%20center/console-gauge-panel-replaces-cubby-storage?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-deab8bed-cd2d-4fe4-99b5-07bf391c8a82 2006 Nissan 350z Cupholder This is a remix of the cupholder below, essentially the same concept just that i found the circle cup holder a bit to small for the larger drinks so i just made it to where its two holes for lager drinks. This is meant to go in the center console. The center console will still function and close with this. https://3dcarparts.org/library/2006/Nissan/350z/cupholder https://r2-upload.3dcarparts.workers.dev/file/parts/deab8bed-cd2d-4fe4-99b5-07bf391c8a82/images/cupholder-1_1760047576848_mbg7v2.jpg in_stock 37.36 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2006/Nissan/350z/cupholder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-97b40c50-561e-4b56-86a2-8ba2474d48ab 2005 Nissan 350Z Door Speaker Mount for JBL Door Speaker I created this because the original 350Z Bose speakers had a mount that was built into the speaker. The JBL door speakers needed to be mounted about 3cm from the door (they were too recessed) or the window would hit the magnet of the speaker and would not roll down all the way. https://3dcarparts.org/library/2005/Nissan/350Z/door-speaker-mount-for-jbl-door-speaker https://r2-upload.3dcarparts.workers.dev/file/parts/97b40c50-561e-4b56-86a2-8ba2474d48ab/images/door-speaker-mount-for-jbl-door-speaker-1_1760047503653_ulo3hh.jpg in_stock 25.77 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350Z/door-speaker-mount-for-jbl-door-speaker?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-4d86f881-b079-4b24-9a0c-f70c148cc1e5 2005 Nissan 350z cubby clip tab fix "This is for the two cubbies behind the seats in the 350z. Mine came with both of the hooks broken off and missing, so I designed new ones.
Prep - use a dremel or razor to clean out and make a level spot where the broken off hook was.
Printing - I recommend using something like ABS or PETG. The model is set for PLA prototypes. When I printed using inland black PETG, it didn't work. To fix this, I multiplied the z height by 1.2 in the slicer and then it worked. I also printed with 100% infill.
Post printing - simply, clean up the part as needed. Put a drop or two of super glue and hold it there, making sure it is aligned before it dries fully." https://3dcarparts.org/library/2005/Nissan/350z/cubby-clip-tab-fix https://r2-upload.3dcarparts.workers.dev/file/parts/4d86f881-b079-4b24-9a0c-f70c148cc1e5/images/cubby-clip-tab-fix-1_1760047452599_ewi6cj.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350z/cubby-clip-tab-fix?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-560a2d72-ab52-4a7e-902b-be975cf27496 2003 Nissan 350Z Windshield Reservoir Cap "I couldn't find a 3D model of the early model 350Z Windshield Wiper Fluid Reservoir Cap so I took some measurements and based the design on this [link](https://www.z1motorsports.com/windshield-washer/nissan/oem-350z-g35-windshield-washer-reservoir-cap-03-06-p-5557.html).
Should fit any other car that uses either 28913-JX00A or 28913-AM600.
It's a rather exact fit, so depending on your printer settings it may need +/- a few percent scale adjustment. Printing as is with PETG at 240C with .3mm layer height worked well and snapped on nicely.
4 models to choose from appropriately named." https://3dcarparts.org/library/2003/Nissan/350Z/windshield-reservoir-cap https://r2-upload.3dcarparts.workers.dev/file/parts/560a2d72-ab52-4a7e-902b-be975cf27496/images/windshield-reservoir-cap-1_1760047385430_15k10i.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2003/Nissan/350Z/windshield-reservoir-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-8221c028-894c-45bc-94fc-1647ee42e4c6 2005 Nissan 350z Boot Hook Clip simple A simplified boot hook clip thingy stuff. Enjoy. https://3dcarparts.org/library/2005/Nissan/350z/boot-hook-clip-simple https://r2-upload.3dcarparts.workers.dev/file/parts/8221c028-894c-45bc-94fc-1647ee42e4c6/images/boot-hook-clip-simple-1_1760047327564_ohpd53.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350z/boot-hook-clip-simple?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6837cb29-0fd0-46ee-acc6-c755670befa4 2005 Nissan 350z Door Vent Comb "I recently bought a 2005 350 base coupe, and among the various bits that are expected to be messed up on an 18-year-old entry-level sports car was the passenger door vent. Removing it revealed that the comb which connects the three vanes was missing. I took out the driver's side vent for reference and made my own. I figure if mine was broken, someone else's likely is too so I should share.
You will need 3 m2 cap head screws to fasten this to the vent body. The original uses 3 little balls that seemed like a weak spot in the design, especially for printing it, so I went with this instead. I may add another file with the original style as well later on." https://3dcarparts.org/library/2005/Nissan/350z%20/door-vent-comb https://r2-upload.3dcarparts.workers.dev/file/parts/6837cb29-0fd0-46ee-acc6-c755670befa4/images/door-vent-comb-1_1760046940919_8u4i17.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350z%20/door-vent-comb?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-28393440-0a2d-4aef-9440-01744db4ec3b 2005 Nissan 350z Rear Tail Light Mounting Bolt Finishing Cap "Tight but did fit.
For
2003-2008 Nissan 350Z
2008-2015 Nissan Rogue" https://3dcarparts.org/library/2005/Nissan/350z/rear-tail-light-mounting-bolt-finishing-cap https://r2-upload.3dcarparts.workers.dev/file/parts/28393440-0a2d-4aef-9440-01744db4ec3b/images/rear-tail-light-mounting-bolt-finishing-cap-1_1760046837956_el6eod.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350z/rear-tail-light-mounting-bolt-finishing-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-84cd21de-05fb-4f17-ac0c-13f0032ed625 2005 Nissan 350Z Cubby 7inch screen holder "Disclaimer: I don't have the model for the brackets on the back.
This was originally a remix but it seems like the original model is not on Thingiverse anymore. Please make me aware of it, if its still online. I dont want to steal his stuff and not credit him.
The model is for a 350Z pre facelift interior, no idea how this fits in the facelift interior. You can melt in some thread inserts in the holes, then mount a screen. The mounting is somewhat whacky, you will have to find your own solution. I did some bracket out of scrap acrylic glass pieces, which I have molten into shape, then drilled some holes. The fitment is nowhere near perfect, but it works.
You can search for a screen on Aliexpress, pretty much any 7 inch screen that shows a Raspberry Pi on its back and has mounting holes in all 4 corners should fit. I attached a sample picture.
I am using a Raspberry Pi with OpenAutoPro, though thats discontinued at this moment. You can search for alternatives, though I have found none. For power delivery, I used this PCB: https://www.tindie.com/products/picotouch/raspberry-pi-automatic-onoff-v30-new-version/ . But thats also not being sold right now, you might find an alternative or just build it on your own with a 12V Relay.
Honest to god, I cannot find the STL for those white arms I have on my model. You need those to attach the screen holder to the center console. I dont know why I dont have them anymore, I really must have deleted them since this project is 2 years back now.
You can fabricate your own arms pretty easily with some acrylic glass. Just cut it to size and heat it with a lighter, then bend it to shape, then drill some holes in it. Or design your own arms, but that's quite some work.
Also I wanted to upload the .step file but it's bigger than 600mb and it just won't upload to thingiverse, not even after letting it sit for 2 hours." https://3dcarparts.org/library/2005/Nissan/350Z/7inch-screen-holder https://r2-upload.3dcarparts.workers.dev/file/parts/84cd21de-05fb-4f17-ac0c-13f0032ed625/images/7inch-screen-holder-1_1760045240358_fniudj.jpg in_stock 26.36 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2005/Nissan/350Z/7inch-screen-holder?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-192c1867-0940-4178-9bda-7b316b7b973a 2011 Nissan GTR Hood Latch Hook Cover 65602JK00A "This part is a recreation of the Nissan hood latch striker cover.
Nissan part # 65602JK00A
Printed this for a 2011 GT-R, should fit on 370Z, Q60, Q50, and various other Nissan models.
When installing this, insert the threaded portion into the top of the printed part otherwise it will appear not to fit.
Print in heat resistant material- ABS, PETG, Amphora, Nylon" https://3dcarparts.org/library/2011/Nissan/GTR/hood-latch-hook-cover-65602jk00a https://r2-upload.3dcarparts.workers.dev/file/parts/192c1867-0940-4178-9bda-7b316b7b973a/images/hood-latch-hook-cover-65602jk00a-1_1760044789773_ganfby.jpg in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2011/Nissan/GTR/hood-latch-hook-cover-65602jk00a?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-395ff787-e25d-40b4-bb9e-92a68b288ecc 2010 Nissan 370z upper storage bin cover This is a cover shell for the Nissan 370z upper storage bin. https://3dcarparts.org/library/2010/Nissan/370z/upper-storage-bin-cover https://r2-upload.3dcarparts.workers.dev/file/parts/395ff787-e25d-40b4-bb9e-92a68b288ecc/images/upper-storage-bin-cover-1_1760044628139_aq6zsp.jpg in_stock 21.41 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories interior https://3dcarparts.org/library/2010/Nissan/370z/upper-storage-bin-cover?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-e1859c1a-75f6-48f6-9b39-c73b650d707b 2021 Ford F-150 Morel Maximo Tweeter Mount "Mounts for Morel Maximo 6 MK II tweeters in a 2023 Ford F-150 Lightning XLT (4 speaker, no B&O). I believe it should work in any F-150 XLT 2021 to 2024, and possibly others.
An original design, but inspired by the mount by JoshFly for the 2015 F-150, which in turn was based off a design by Spincycle76" https://3dcarparts.org/library/2021/Ford/F-150/morel-maximo-tweeter-mount-2021-ford-f-150-xlt https://r2-upload.3dcarparts.workers.dev/file/parts/e1859c1a-75f6-48f6-9b39-c73b650d707b/images/morel-maximo-tweeter-mount-2021-ford-f-150-xlt-1_1760033149143_83n0ix.jpg in_stock 0.00 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2021/Ford/F-150/morel-maximo-tweeter-mount-2021-ford-f-150-xlt?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-56cfb9df-b5cd-4627-9c24-a8840c89bd37 2012 Toyota Tacoma Bed rail Insert Hook "I got the anchor from: https://www.thingiverse.com/thing:2177943
I used a 5/16-18 hex nut, a 5/16-18x 1-1/4 eye bolt, a 5/16 wing nut and a washer
I break these couple times. play with the mesh a little to get a stronger design." https://3dcarparts.org/library/2012/Toyota/Tacoma/bed-rail-insert-hook https://r2-upload.3dcarparts.workers.dev/file/parts/56cfb9df-b5cd-4627-9c24-a8840c89bd37/images/tacoma_bed_hook_1756257379142_ys14x6.webp in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2012/Toyota/Tacoma/bed-rail-insert-hook?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-51eb61d0-afd6-4e52-97b3-3523408a8845 1994 Nissan 300ZX Cruise Control Cap It covers the cruise control module in the engine bay. https://3dcarparts.org/library/1994/Nissan/300ZX/cruise-control-cap https://r2-upload.3dcarparts.workers.dev/file/parts/51eb61d0-afd6-4e52-97b3-3523408a8845/images/Screenshot_2025-08-21_at_10_54_56_AM_1755799187205_b0p1bf.png in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories engine https://3dcarparts.org/library/1994/Nissan/300ZX/cruise-control-cap?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-435c3815-5f22-47bc-af39-9886015ef473 1994 Nissan 300ZX Bose To Normal 6.5 Drivers Rear Speaker Spacer This part raises the speaker up so that it doesn't contact the body beneath, but still fits under the stock Bose cover. Install lip side down into 6.5 adapter (uploading soon, currently sold by others on amazon) https://3dcarparts.org/library/1994/Nissan/300ZX/bose-to-normal-65-drivers-rear-speaker-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/435c3815-5f22-47bc-af39-9886015ef473/images/Screenshot_2025-08-19_at_7_49_35_PM_1755658372889_x4zqgp.png in_stock 23.49 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories mounts-brackets https://3dcarparts.org/library/1994/Nissan/300ZX/bose-to-normal-65-drivers-rear-speaker-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-6303c537-f1c4-4af7-a93b-c30ce9f576d5 1993 Nissan 300ZX Twinz Tt Front Valence To Na Bumper Spacer It adapts the twinz lip to the regular na bumper buy spacing it at an angle 20+mm, creating perfect fitment. https://3dcarparts.org/library/1993/Nissan/300ZX/twinz-tt-front-valence-to-na-bumper-spacer https://r2-upload.3dcarparts.workers.dev/file/parts/6303c537-f1c4-4af7-a93b-c30ce9f576d5/images/IMG_0623_1755466018381_tc90xx.jpg in_stock 21.38 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/1993/Nissan/300ZX/twinz-tt-front-valence-to-na-bumper-spacer?utm_source=google-shopping&utm_medium=feed
3dcarparts-part-5d60a443-1a07-4772-a70c-544f68c8067b 2014 Hyundai Genesis Coupe Windshield Moulding Clip This part is located under the windshield moulding. https://3dcarparts.org/library/2014/Hyundai/Genesis%20Coupe/windshield-moulding-clip https://r2-upload.3dcarparts.workers.dev/file/parts/5d60a443-1a07-4772-a70c-544f68c8067b/images/genesis-trim-clip-iso_1754327422309_kna2l7.png in_stock 7.10 USD 3DCarParts new no Vehicles & Parts > Vehicle Parts & Accessories exterior https://3dcarparts.org/library/2014/Hyundai/Genesis%20Coupe/windshield-moulding-clip?utm_source=google-shopping&utm_medium=feed