Radio Delete Plate
1967 Pontiac Gto
Description
Basic radio delete plate for a 1967 Pontiac GTO. Carefully thread the rear posts in 1/4-20, insert it into the dash and use whatever washers nuts required to hold it in place. Print in PETG or ABS, ASA etc. Not PLA. You can vary the thickness of the plate in an STL editor, it's a bit thick now for strength, probably doesn't need to be that thick, which makes it take longer to print, and possibly more prone to warpage. Use the usual precautions to prevent warpage, it's a long flat part. Print face down on a textured PEI surface and it makes a passable "grain" pattern in the front side that will be visible.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Basic radio delete plate for a 1967 Pontiac GTO. Carefully thread the rear posts in 1/4-20, insert it into the dash and use whatever washers nuts required to hold it in place. Print in PETG or ABS, ASA etc. Not PLA. You can vary the thickness of the plate in an STL editor, it's a bit thick now for strength, probably doesn't need to be that thick, which makes it take longer to print, and possibly more prone to warpage. Use the usual precautions to prevent warpage, it's a long flat part. Print face down on a textured PEI surface and it makes a passable "grain" pattern in the front side that will be visible.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed