Ac Gauge Pod
1984 Nissan Z31
Description
This turns the ac vent right to the steering wheel into a gauge pod to utilize the JJCOCO WATER TEMP GAUGE / ZHSYMX GAUGES and the square voltmeter "Panel Volt Meter - 4.5V to 30VDC" available at adafruit (Product ID: 575) To install this i recommend retiring the radio and unclip the ac vent from the back, the install of this part its the same as the removal of the oem ac vent. You WILL need to adjust the model to accomodate different gauges.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This turns the ac vent right to the steering wheel into a gauge pod to utilize the JJCOCO WATER TEMP GAUGE / ZHSYMX GAUGES and the square voltmeter "Panel Volt Meter - 4.5V to 30VDC" available at adafruit (Product ID: 575) To install this i recommend retiring the radio and unclip the ac vent from the back, the install of this part its the same as the removal of the oem ac vent. You WILL need to adjust the model to accomodate different gauges.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed