Armrest / Door Pull
1990-1999 Ford F-150
Description
Replacement armrest / door closer handle for the 1990s era Ford F-150. Don't bother searching the junkyards for a good salvage one, they all broke over the years. A bit of a poor design really. -- These are NOT a perfect show truck fit. --- They are a good start for you. ;-) I have a rusty 33yr old work truck that still works. Spray glue a layer of foam for comfort and cover with a free material. Made with SUNLU, PLA+ @ 35% infill, 11 hour print time each side. Holds staples from a regular staple gun when pulling the fabric cover tight. Total repair cost about $6.00
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Replacement armrest / door closer handle for the 1990s era Ford F-150. Don't bother searching the junkyards for a good salvage one, they all broke over the years. A bit of a poor design really. -- These are NOT a perfect show truck fit. --- They are a good start for you. ;-) I have a rusty 33yr old work truck that still works. Spray glue a layer of foam for comfort and cover with a free material. Made with SUNLU, PLA+ @ 35% infill, 11 hour print time each side. Holds staples from a regular staple gun when pulling the fabric cover tight. Total repair cost about $6.00
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed