Headlight Ring
1990-1997 Mazda Mx-5 Miata NA
Description
My Miata came with the lazy eye mod and no rings. Why even get an NA. Obviously I needed to fix that problem. This ring works with the non electronically adjustable (manual) headlights. Standard 3 tab ring with reinforced tabs printed out of ABS and they fit my 96 perfectly. Generic ABS settings Fan set to 0-10% Organic Trees with 2.225 Z top distance My model is based off of the file found here: printables.com/refresh?redirectUrl=%2Fmodel%2F1363715-na-miata-headlight-head-light-retainer-na01-51-033%2Fuser-gcodes However I'd highly recommend *not* printing this one as the tabs are super weak.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
My Miata came with the lazy eye mod and no rings. Why even get an NA. Obviously I needed to fix that problem. This ring works with the non electronically adjustable (manual) headlights. Standard 3 tab ring with reinforced tabs printed out of ABS and they fit my 96 perfectly. Generic ABS settings Fan set to 0-10% Organic Trees with 2.225 Z top distance My model is based off of the file found here: printables.com/refresh?redirectUrl=%2Fmodel%2F1363715-na-miata-headlight-head-light-retainer-na01-51-033%2Fuser-gcodes However I'd highly recommend *not* printing this one as the tabs are super weak.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed