Dash Cup Holder
1990-1998 Subaru Sambar
Description
Simple dash cup holder design for Subaru Sambar. I made it fit a Yeti 20 oz tumbler and have reducer rings for a standard 12 oz can and skinny can. It stops short of the front of the tray area so there's room for small stuff like pens etc. I printed in ASA for heat resistance and durability. Friction seems to hold it in place pretty well, but you could aways add some double-sided tape or Velcro to the rear bottom tab to hold it more secure. I designed this for my 1998 Samber. It should fit all 5th gen Sambars (1990-1998).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Simple dash cup holder design for Subaru Sambar. I made it fit a Yeti 20 oz tumbler and have reducer rings for a standard 12 oz can and skinny can. It stops short of the front of the tray area so there's room for small stuff like pens etc. I printed in ASA for heat resistance and durability. Friction seems to hold it in place pretty well, but you could aways add some double-sided tape or Velcro to the rear bottom tab to hold it more secure. I designed this for my 1998 Samber. It should fit all 5th gen Sambars (1990-1998).
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed