Radiator Upper Mount
1991-1999 Toyota Mr2 SW20
May 7, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
These replace the OEM steel mounts for the MR2 SW20 chassis. They are only tested on an OEM radiator. Be sure to use a high temp filament. I used bambu PET-CF. I believe even basic ABS and ASA will deform when the radiator is hot. If one over-heats, it could deform more. use at your own risk.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
These replace the OEM steel mounts for the MR2 SW20 chassis. They are only tested on an OEM radiator. Be sure to use a high temp filament. I used bambu PET-CF. I believe even basic ABS and ASA will deform when the radiator is hot. If one over-heats, it could deform more. use at your own risk.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed