Lower Glove Box Handle
Description
Lower Glovebox handle for Volkswagen Golf/Jetta/Vento. VAG part number 1H1 857 147. If you have any problem with the scale of the model, adjust the size in power of 10s until it's about 36x64x62mm. A brim is recommended if printing in ABS or ASA. Orientation as in the first picture. Leave a Like and post a make if you do this project, and help me continue reverse engeneering other vehicle parts.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Lower Glovebox handle for Volkswagen Golf/Jetta/Vento. VAG part number 1H1 857 147. If you have any problem with the scale of the model, adjust the size in power of 10s until it's about 36x64x62mm. A brim is recommended if printing in ABS or ASA. Orientation as in the first picture. Leave a Like and post a make if you do this project, and help me continue reverse engeneering other vehicle parts.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed