Gauge Panel
1992-1996 Ford F-150 OBS
May 10, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
This is what I made to hold a TPMS display I got from ebay that is designed to go into the blank switch positions on Japanese cars. It also can hold a 2 1/16 gauge. The place can be mounted without cutting out both sides of the dash panel so you can choose what side you want to use.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
This is what I made to hold a TPMS display I got from ebay that is designed to go into the blank switch positions on Japanese cars. It also can hold a 2 1/16 gauge. The place can be mounted without cutting out both sides of the dash panel so you can choose what side you want to use.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed