Trunk Emblem Badge Base
1995 Honda Civic
Description
This are bases for flat emblems that are cheap and it can stick to the base just using the included double sided tape. I designed 3 versions for 3 different dimensions: - 63mm x 54mm (OEM size for the Civic EJ1) - 68mm x 56mm - 72mm x 60mm For fixing the base to the trunk you can use two M3 screws and nuts, I would be better if you use a auto locking nuts on the back and some washer to spread the load into the metal sheet. Also be sure to use some gasket maker around the bolts so you don't get some water getting into the trunk. The emblems can be bought on ebay, amazon or aliexpress. A link as example to buy the same emblems I used is: https://www.ebay.com/itm/284108633183 If you are on Argentina you can ask IRPRacing: https://irpracing.com.ar/producto/emblemas-exteriores-honda-civic-accord-88-00-varios-colores/
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This are bases for flat emblems that are cheap and it can stick to the base just using the included double sided tape. I designed 3 versions for 3 different dimensions: - 63mm x 54mm (OEM size for the Civic EJ1) - 68mm x 56mm - 72mm x 60mm For fixing the base to the trunk you can use two M3 screws and nuts, I would be better if you use a auto locking nuts on the back and some washer to spread the load into the metal sheet. Also be sure to use some gasket maker around the bolts so you don't get some water getting into the trunk. The emblems can be bought on ebay, amazon or aliexpress. A link as example to buy the same emblems I used is: https://www.ebay.com/itm/284108633183 If you are on Argentina you can ask IRPRacing: https://irpracing.com.ar/producto/emblemas-exteriores-honda-civic-accord-88-00-varios-colores/
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed