Cup Holder Adapter
1995 Jeep Grand Cherokee ZJ (Laredo)
Description
I designed a cup holder adapter for my 1995 ZJ Laredo, as the console has a different configuration than the cup holder that is already in Thingverse. I made it to fit a Power Ade bottle, and made a smaller adapter for my wife's coffee cup. It will still allow a regular 12 oz can to fit inside it. The bottle is very close in size to the failure of a Jeep cup holder, so the walls are not terribly thick, so that it fits in. I originally had straight sides and printed in PTEG, and the bottle fit tightly, but in the heat of the sun, the holder shrunk just a little. So I redesigned it with a slight taper and printed in carbon fiber, which hopefully won't shrink.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I designed a cup holder adapter for my 1995 ZJ Laredo, as the console has a different configuration than the cup holder that is already in Thingverse. I made it to fit a Power Ade bottle, and made a smaller adapter for my wife's coffee cup. It will still allow a regular 12 oz can to fit inside it. The bottle is very close in size to the failure of a Jeep cup holder, so the walls are not terribly thick, so that it fits in. I originally had straight sides and printed in PTEG, and the bottle fit tightly, but in the heat of the sun, the holder shrunk just a little. So I redesigned it with a slight taper and printed in carbon fiber, which hopefully won't shrink.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed