Door Lock Post
1996 Ford Ranger
Description
The door lock posts on my 1996 Ford Ranger were broken, making them virtually unusable. I made these to avoid buying replacements (after all, isn't that part of the reason why we have 3d printers?). I had to drill and tap these to fit the threads on the door lock rods. I believe the thread size was 10-32. As always, if you make one, all I ask is that you please share a photo or at least comment on how it worked for you!
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The door lock posts on my 1996 Ford Ranger were broken, making them virtually unusable. I made these to avoid buying replacements (after all, isn't that part of the reason why we have 3d printers?). I had to drill and tap these to fit the threads on the door lock rods. I believe the thread size was 10-32. As always, if you make one, all I ask is that you please share a photo or at least comment on how it worked for you!
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed