Dash Phone Holder
1996-2000 Honda Civic
Description
I use my S23 Ultra as my head unit and needed a secure mount for it that wasn't too much in the way. Took two diff designs and mashed them together. I used 3mm heat-sets but you can also run long screws all the way through with nuts. Angled slightly towards the driver. I modified the "phone mount outside" to run a hair tie or elastic. Dash plate is a tight snap fit. Will need to be pushed from the backside for removal. Adapter bracket is printed with "mcdonalds logo" down. High resolution. I printed everything at 0.15 layer height and 20% infill. 5 walls in PETG. No supports needed anywhere.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I use my S23 Ultra as my head unit and needed a secure mount for it that wasn't too much in the way. Took two diff designs and mashed them together. I used 3mm heat-sets but you can also run long screws all the way through with nuts. Angled slightly towards the driver. I modified the "phone mount outside" to run a hair tie or elastic. Dash plate is a tight snap fit. Will need to be pushed from the backside for removal. Adapter bracket is printed with "mcdonalds logo" down. High resolution. I printed everything at 0.15 layer height and 20% infill. 5 walls in PETG. No supports needed anywhere.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed