Door Handle Trim Holder
1996-2003 Renault Scenic
Description
I've made this reproduction of the original one beacuse a friend of mine was in a hurry with his car (didnt pass OK the technical vehicle inspection). I've tested with him by myself and it works perfectly (and most important, did pass de TVI) so i decided to share it with all the community for help mechanics and 1996 to 2003 megane scenic owners. I've printed it with my custom made prusas in a low resolution profile and normal PLA. (0.3mm, 0.4 nozzle and 30%infill was OK for me) but feel free to try another different profiles. Diseñe esta pieza, reproduciendo la original ,porque un amigo tuvo problemas al intentar pasar la itv de su scenic con la pieza rota. La probe con el y funciono perfecta, y ademas paso la ITV, asi que he decidido compartirla con vosotros, sobretodo para ayudar a mecanicos o propietarios de alguna renault scenic mk1 o mk2, la imprimi usando una de mis prusas caseras DIY a baja resolucion con PLA normal y corriente.0.3mm, 0.4 nozzle and 30%infil funciono perfecto pero podeis probar con algunas con mejor calidad.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I've made this reproduction of the original one beacuse a friend of mine was in a hurry with his car (didnt pass OK the technical vehicle inspection). I've tested with him by myself and it works perfectly (and most important, did pass de TVI) so i decided to share it with all the community for help mechanics and 1996 to 2003 megane scenic owners. I've printed it with my custom made prusas in a low resolution profile and normal PLA. (0.3mm, 0.4 nozzle and 30%infill was OK for me) but feel free to try another different profiles. Diseñe esta pieza, reproduciendo la original ,porque un amigo tuvo problemas al intentar pasar la itv de su scenic con la pieza rota. La probe con el y funciono perfecta, y ademas paso la ITV, asi que he decidido compartirla con vosotros, sobretodo para ayudar a mecanicos o propietarios de alguna renault scenic mk1 o mk2, la imprimi usando una de mis prusas caseras DIY a baja resolucion con PLA normal y corriente.0.3mm, 0.4 nozzle and 30%infil funciono perfecto pero podeis probar con algunas con mejor calidad.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed