Side Mirror Motor Cover
1998-2004 Mercedes-benz Slk R170
May 10, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Designed this, as the spare part procured did not fit to my SLK model. This is designed for the right rear mirror of an Mercedes SLK R170 (model year 1998-2004). The tricky part is where the heads of the motor screws are sqeezed into the plate. PLA breakes easily, so you need to take care. Lay the flat part bottom-down before printing, then you won't need supports!
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Designed this, as the spare part procured did not fit to my SLK model. This is designed for the right rear mirror of an Mercedes SLK R170 (model year 1998-2004). The tricky part is where the heads of the motor screws are sqeezed into the plate. PLA breakes easily, so you need to take care. Lay the flat part bottom-down before printing, then you won't need supports!
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed