Rear Parcel Shelf Base Panel Socket
1999-2006 Honda Hr-v
Description
This is a replacement part for the base mount of the Rear Parcel Shelf of a Honda HR-V 1999-2006 model. You will need to print two of them obviously and mirror horizontally the second one in your slicer software in order to have a LEFT and a Right piece. You will also need two 3mm screws with a head diameter up to 7mm so that you can fit them in the holes in order to screw them in place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a replacement part for the base mount of the Rear Parcel Shelf of a Honda HR-V 1999-2006 model. You will need to print two of them obviously and mirror horizontally the second one in your slicer software in order to have a LEFT and a Right piece. You will also need two 3mm screws with a head diameter up to 7mm so that you can fit them in the holes in order to screw them in place.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed