Rear A/c Line Set Bracket
1999-2004 Honda Odyssey
May 10, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
The sheetmetal brackets that hold the AC lines to the rear of the car were rusted away. There are 2 clamps on the lines. This is the clamp toward the back of the car by the right rear wheel. Fits 1999 to 2004 Honda Odyssey. Printed using ABS to withstand higher temps than PLA. The arc module was written by my son - Tim.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
The sheetmetal brackets that hold the AC lines to the rear of the car were rusted away. There are 2 clamps on the lines. This is the clamp toward the back of the car by the right rear wheel. Fits 1999 to 2004 Honda Odyssey. Printed using ABS to withstand higher temps than PLA. The arc module was written by my son - Tim.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed