Parcel Shelf Hinge
Description
Hinge for the trunk cover in Golf/GTI (and maybe hatchback Passat, Jetta, Bora, etc.) from 99-05 (Mk4). Recommend printing vertically as shown in the images, recommend printing at 90% infill density (not 100%, don't be fooled- 100% infill makes bad parts) for best strength. This can be used for either the left or right hinge by mirroring in Cura. The file itself is for a left-side hinge. They are a tight fit so don't be afraid to put a little force on it to install.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Hinge for the trunk cover in Golf/GTI (and maybe hatchback Passat, Jetta, Bora, etc.) from 99-05 (Mk4). Recommend printing vertically as shown in the images, recommend printing at 90% infill density (not 100%, don't be fooled- 100% infill makes bad parts) for best strength. This can be used for either the left or right hinge by mirroring in Cura. The file itself is for a left-side hinge. They are a tight fit so don't be afraid to put a little force on it to install.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed