Cupholder
2004-2013 Bmw 1 Series E81/E82/E87/E88
Description
Check out the never version of this cupholder: https://www.thingiverse.com/thing:6766446 Model is based on original BMW1 cupholder For the "BMW1_cupholder_bottom_part.stl" part as you can see in the photos I used rubber material from bicycle inner tube to prevent petg plastic from scratching the interior. Dimensions "BMW1_cupholder_adaptor_for_smaller_cups.stl" - X: 8.68 cm Y: 9.02 cm Z: 2.33 cm "BMW1_cupholder_main_part.stl" - X: 10.1 cm Y: 12.3 cm Z: 11.4 cm "BMW1_cupholder_bottom_part.stl" - X: 4.81 cm Y: 4.25 cm Z: 11.6 cm
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Check out the never version of this cupholder: https://www.thingiverse.com/thing:6766446 Model is based on original BMW1 cupholder For the "BMW1_cupholder_bottom_part.stl" part as you can see in the photos I used rubber material from bicycle inner tube to prevent petg plastic from scratching the interior. Dimensions "BMW1_cupholder_adaptor_for_smaller_cups.stl" - X: 8.68 cm Y: 9.02 cm Z: 2.33 cm "BMW1_cupholder_main_part.stl" - X: 10.1 cm Y: 12.3 cm Z: 11.4 cm "BMW1_cupholder_bottom_part.stl" - X: 4.81 cm Y: 4.25 cm Z: 11.6 cm
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed