Rear Door Cable Holder
2004 Honda Accord
Description
This will hold the cable onto the door handle frame when the green plastic cable housing end breaks off. This replaces the metal angle, the mounting hole is printed in but will need an M3x0.5 tap to create the threads. Just remove the metal angle, and attach the print and then the cable will snap in place. I printed it with tree supports and the bolt hole on the top. I used PETG-CF, but ABS or ASA may be more suitable...
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This will hold the cable onto the door handle frame when the green plastic cable housing end breaks off. This replaces the metal angle, the mounting hole is printed in but will need an M3x0.5 tap to create the threads. Just remove the metal angle, and attach the print and then the cable will snap in place. I printed it with tree supports and the bolt hole on the top. I used PETG-CF, but ABS or ASA may be more suitable...
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed