Shelf Clip
2004 Hyundai Tiburon
Description
The clip that holds the rear shelf (covering the trunk space) in place. I somehow lost mine, so I quickly modeled this in FreeCAD and printed it. **Update** The original file was a bit narrower than the real piece (I eyeballed all of the dimensions), but I planned on superglueing it in place anyways, so it worked for me. I have since gone back and revised the file to be much closer to true dimensions. It is still a little different from the OEM part, but very close now. ** Use the tiburon_clip_v3.stl file **
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The clip that holds the rear shelf (covering the trunk space) in place. I somehow lost mine, so I quickly modeled this in FreeCAD and printed it. **Update** The original file was a bit narrower than the real piece (I eyeballed all of the dimensions), but I planned on superglueing it in place anyways, so it worked for me. I have since gone back and revised the file to be much closer to true dimensions. It is still a little different from the OEM part, but very close now. ** Use the tiburon_clip_v3.stl file **
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed