Glove Box Bracket
2005 Saab 9-3
Description
Brackets to replace the broken brackets that hold the lid of the glove box of a Saab 9-3 from 2005. One picture shows the original bracket next to it. To create the part, print both halves 2x with 100% infill and glue them together with adhesive or thin double sided tape. This is done to allow easy printing without the need for support structures. Parts must be printed lying down on the biggest surface for maximum strength.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Brackets to replace the broken brackets that hold the lid of the glove box of a Saab 9-3 from 2005. One picture shows the original bracket next to it. To create the part, print both halves 2x with 100% infill and glue them together with adhesive or thin double sided tape. This is done to allow easy printing without the need for support structures. Parts must be printed lying down on the biggest surface for maximum strength.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed