Auxbeam 8-gang Switch Mount
2005-2015 Toyota Tacoma
Description
Simple 3D printed mount for 2005-2015 Tacoma's with the Garage Door Opener flap in the overhead console. It discretely hides an Auxbeam 8-Gang switch panel away from view and is super solid when down. Allows for a stealthy installation of the control panel, all you need to do is drill a 1/2'' hole in the black plastic above to pass the wire through, and 2 #2 screws 1/2" long to mount it in place. the Auxbeam 8-Gang switch panel fits in and holds itself in place without issue, and I have run it this way for 75,000+KM with no issues.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Simple 3D printed mount for 2005-2015 Tacoma's with the Garage Door Opener flap in the overhead console. It discretely hides an Auxbeam 8-Gang switch panel away from view and is super solid when down. Allows for a stealthy installation of the control panel, all you need to do is drill a 1/2'' hole in the black plastic above to pass the wire through, and 2 #2 screws 1/2" long to mount it in place. the Auxbeam 8-Gang switch panel fits in and holds itself in place without issue, and I have run it this way for 75,000+KM with no issues.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed