Dash Button
2006-2009 Ford Fusion
May 7, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
Updated: Increased contact area for latch. The button was missing on the ford fusion I bought, and I found the one that DeadShot3D uploaded. When printed, the walls were very thin on the shaft and the tang that locks it into place was loose and eventually broke. I beefed up the end that holds it in place and it seems to be more sturdy and stay in now.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
Updated: Increased contact area for latch. The button was missing on the ford fusion I bought, and I found the one that DeadShot3D uploaded. When printed, the walls were very thin on the shaft and the tang that locks it into place was loose and eventually broke. I beefed up the end that holds it in place and it seems to be more sturdy and stay in now.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed