Bumper Fastener
2006-2011 Honda Civic 8th gen
Description
2006-2011 Honda Civics have a black plastic "hanger" on the rear quarter panel, that the rear bumper cover snaps onto. A couple plastic fasteners on each side hold the hanger onto the quarter panel. This part is a modification of the factory fastener - this part requires a large flat-head screw to be driven into the fastener, to hold the hanger in place. You provide the screw. I can't provide the screw specifics, as I didn't end up needing this part after I printed it - my hanger replacement came with the fasteners needed. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0CyNYYXIAYU
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
2006-2011 Honda Civics have a black plastic "hanger" on the rear quarter panel, that the rear bumper cover snaps onto. A couple plastic fasteners on each side hold the hanger onto the quarter panel. This part is a modification of the factory fastener - this part requires a large flat-head screw to be driven into the fastener, to hold the hanger in place. You provide the screw. I can't provide the screw specifics, as I didn't end up needing this part after I printed it - my hanger replacement came with the fasteners needed. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0CyNYYXIAYU
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed