Clock / Trip Relocation Bracket
2009 Subaru Legacy
Description
I have made this model as any other model If found here or on the internet had poor fitment on my car. This fits almost perfectly to a 2009 Subaru Legacy (B4). This model relocates the clock to the ash tray and lighter hole. Print the two parts in a temperature resistant filament and glue with epoxy, I recommend to sand, fill and paint them as I will do in the near future. See printing orientation in the pictures attached. I have invested a whole spool+ some 50 printing hours and 7 hours designing it excluding many iterations, if it fits you well throw a buck in my paypal :) alexsh89@gmail.com
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I have made this model as any other model If found here or on the internet had poor fitment on my car. This fits almost perfectly to a 2009 Subaru Legacy (B4). This model relocates the clock to the ash tray and lighter hole. Print the two parts in a temperature resistant filament and glue with epoxy, I recommend to sand, fill and paint them as I will do in the near future. See printing orientation in the pictures attached. I have invested a whole spool+ some 50 printing hours and 7 hours designing it excluding many iterations, if it fits you well throw a buck in my paypal :) alexsh89@gmail.com
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed