Key Fob Button Skin
2013 Hyundai Santa Fe
Description
Use TPU filament to print a replacement soft button skin for a 2013 Hyundai Santa Fe (or similar). Fits very snug, and should be glued in - I used Gorilla Glue gel. I've included the STL, GCODE, Cura project file and Fusion 360 file. * 8/8/2019 Update: I removed the extra half-moon shapes around each button cylinder, as these were not part of the original design, and they make the button-presses more difficult.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Use TPU filament to print a replacement soft button skin for a 2013 Hyundai Santa Fe (or similar). Fits very snug, and should be glued in - I used Gorilla Glue gel. I've included the STL, GCODE, Cura project file and Fusion 360 file. * 8/8/2019 Update: I removed the extra half-moon shapes around each button cylinder, as these were not part of the original design, and they make the button-presses more difficult.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed