Radio Shade
2013 Nissan Xterra
Description
I converted the stock radio in my 2013 Xterra S to handle a backup camera. The sun sometimes washed out the image. This shade took care of that. Print from PETG. Let it cool down completely before removing it from the bed. Remove the top-mounted dash tray by prying up carefully with a plastic too from the BACK. Drill a tiny hole through the tab at the rear of the shade and into the dash plastic, where it will be hidden by the dash tray. Use a very small sheet metal screw to secure it. For information on adding the backup camera to the stock radio, see: https://www.youtube.com/watch?v=ufnaMLX9kg8
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Fit Reports
How this part printed and fit, from the community.
Part Description
I converted the stock radio in my 2013 Xterra S to handle a backup camera. The sun sometimes washed out the image. This shade took care of that. Print from PETG. Let it cool down completely before removing it from the bed. Remove the top-mounted dash tray by prying up carefully with a plastic too from the BACK. Drill a tiny hole through the tab at the rear of the shade and into the dash plastic, where it will be hidden by the dash tray. Use a very small sheet metal screw to secure it. For information on adding the backup camera to the stock radio, see: https://www.youtube.com/watch?v=ufnaMLX9kg8
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Fit Reports
How this part printed and fit, from the community.