Side Marker Hook Repair
2015 Dodge Challenger
Description
There was a post on Facebook about a broken off side marker clip. Tryed to make a repair part that can be glued onto the marker adding the broken off hook. I do not have a broken off maker, could not test it. If it needs adjustments, let me know. I would print it in PETG or ABS. Image below, cut the hook at the red line, glue on the part at the blue box. (to be sure, first tape it on before glueing it) Searching for 3D printed designs? Take a look at my Etsy store GraverEn3D.Etsy.Com post on Facebook https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/90963908_2773116166140750_3897184832546930688_n.jpg?_nc_cat=108&_nc_sid=ca434c&_nc_ohc=Hw3kHlblkKQAX8kePQh&_nc_ht=scontent-amt2-1.xx&oh=c42b61097100d26c9dff6b75bdd15c14&oe=5EA67325
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
There was a post on Facebook about a broken off side marker clip. Tryed to make a repair part that can be glued onto the marker adding the broken off hook. I do not have a broken off maker, could not test it. If it needs adjustments, let me know. I would print it in PETG or ABS. Image below, cut the hook at the red line, glue on the part at the blue box. (to be sure, first tape it on before glueing it) Searching for 3D printed designs? Take a look at my Etsy store GraverEn3D.Etsy.Com post on Facebook https://scontent-amt2-1.xx.fbcdn.net/v/t1.0-9/90963908_2773116166140750_3897184832546930688_n.jpg?_nc_cat=108&_nc_sid=ca434c&_nc_ohc=Hw3kHlblkKQAX8kePQh&_nc_ht=scontent-amt2-1.xx&oh=c42b61097100d26c9dff6b75bdd15c14&oe=5EA67325
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed