Door Handle Button
2016 Hyundai Tucson
Description
This is a replacement button that goes into the door handle of our 2016 Hyundai Tucson. The original button is held in by a membrane surround which wears out in time, causing the button to fall out one fine day. We lost the passenger side completely, and luckily the driver side fell out in our driveway, so I was able to model a replacement. See pictures. Note that the two bubbles on each side of the button serve to hold it in the door handle, and as such they are a tight fit. Use the Button with extension to perform a test fit (extension makes it easier to remove if the fit is not quite right), then print the real thing if the test fit passes. Driver/passenger side button is identical.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a replacement button that goes into the door handle of our 2016 Hyundai Tucson. The original button is held in by a membrane surround which wears out in time, causing the button to fall out one fine day. We lost the passenger side completely, and luckily the driver side fell out in our driveway, so I was able to model a replacement. See pictures. Note that the two bubbles on each side of the button serve to hold it in the door handle, and as such they are a tight fit. Use the Button with extension to perform a test fit (extension makes it easier to remove if the fit is not quite right), then print the real thing if the test fit passes. Driver/passenger side button is identical.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed