Action Cam Mirror Mount
2016 Mazda Mx-5 Miata ND
Description
This holder can be attached to the mirror of a Miata MX-5 ND 2016. The diameter of the mirror holder of my Miata is 19.2mm. The clamp is designed according to this. I kept it minimal as possible to reduce weight but still keeping it stable. I use it with my action cam (not GoPro) and it works great (see pictures) I believe in free designs therefore I added also the FreeCad file. You are free to use it to e.g. adapt the length (which might be necessary if you want to use it with a GoPro). Go to Sketch and change the length. My design is based on the length, means Holes etc. should move accordingly. I printed it using PETG and 0.2mm layer height. You additionally need 2x M5 nuts and GoPro screws for fixind the clamp and camera. Have fun and enjoy it. 20241103: increased hole diameter for hinge for print-in-place version. Should now be printable more easily; added version with detachable clamp.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This holder can be attached to the mirror of a Miata MX-5 ND 2016. The diameter of the mirror holder of my Miata is 19.2mm. The clamp is designed according to this. I kept it minimal as possible to reduce weight but still keeping it stable. I use it with my action cam (not GoPro) and it works great (see pictures) I believe in free designs therefore I added also the FreeCad file. You are free to use it to e.g. adapt the length (which might be necessary if you want to use it with a GoPro). Go to Sketch and change the length. My design is based on the length, means Holes etc. should move accordingly. I printed it using PETG and 0.2mm layer height. You additionally need 2x M5 nuts and GoPro screws for fixind the clamp and camera. Have fun and enjoy it. 20241103: increased hole diameter for hinge for print-in-place version. Should now be printable more easily; added version with detachable clamp.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed