Cup Holder Insert
2016 Mercedes-benz E-class (E200)
Description
My car needed a cup holder for my take away coffee, so I made one after searching for ideas on the internet. The max cup diameter is 78 mm. The body is 175 mm (L) x 94 mm (W) x 45 mm (H). No support is needed for the body and clip, but you may consider using brim for the clip (can get away with no brim if printed slow enough).If you can not modify it for your car, please contact me. You need 2 rubber band (easily available) to strap down the 8 clips. You can get away by using 4 clips instead of 8. Suggest printing 1 clip first to see if it fit the body. If too tight, you can scale down the clip by 1%, vice versa. You can also design a metal spring to replace the rubber band but I think it is much easier to replace the rubber band when it is broken. Print in ABS if you live in hot climate or park your car under the sun.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
My car needed a cup holder for my take away coffee, so I made one after searching for ideas on the internet. The max cup diameter is 78 mm. The body is 175 mm (L) x 94 mm (W) x 45 mm (H). No support is needed for the body and clip, but you may consider using brim for the clip (can get away with no brim if printed slow enough).If you can not modify it for your car, please contact me. You need 2 rubber band (easily available) to strap down the 8 clips. You can get away by using 4 clips instead of 8. Suggest printing 1 clip first to see if it fit the body. If too tight, you can scale down the clip by 1%, vice versa. You can also design a metal spring to replace the rubber band but I think it is much easier to replace the rubber band when it is broken. Print in ABS if you live in hot climate or park your car under the sun.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed