Hood Spacer
2016 Nissan Versa Note
Description
I recently got a battery maintainer for a 2016 Nissan Versa Note that we infrequently drive. The battery maintainer requires the hood to be opened but I didn't want to leave it opened the full way. This spacer attaches to the latch and lets the hood loop thingy rest on it. I printed it in ABS and it seems strong enough. If you print in another material proof test it to make sure its strong enough. Print per orientation in the slicer screenshot. Update: Uploaded a v2 that has the trough at an angle to better match the hood angle. Works equally good.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I recently got a battery maintainer for a 2016 Nissan Versa Note that we infrequently drive. The battery maintainer requires the hood to be opened but I didn't want to leave it opened the full way. This spacer attaches to the latch and lets the hood loop thingy rest on it. I printed it in ABS and it seems strong enough. If you print in another material proof test it to make sure its strong enough. Print per orientation in the slicer screenshot. Update: Uploaded a v2 that has the trough at an angle to better match the hood angle. Works equally good.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed