Head Unit Mounts
2016-2023 Toyota Tacoma 3rd Gen
Description
These mounts are to fasten the Dasaita Head Unit to the 3rd Gen Toyota Tacoma. The factory mounts require significant bending in order to allow the factory bezel to fit properly over the new head unit. (6) M5x14 FHCS (Flat Head Cap Screws) are required to fasten the brackets to the head unit https://www.mcmaster.com/92125a211 The factory M6 screws can be reused to fasten the brackets to the truck.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These mounts are to fasten the Dasaita Head Unit to the 3rd Gen Toyota Tacoma. The factory mounts require significant bending in order to allow the factory bezel to fit properly over the new head unit. (6) M5x14 FHCS (Flat Head Cap Screws) are required to fasten the brackets to the head unit https://www.mcmaster.com/92125a211 The factory M6 screws can be reused to fasten the brackets to the truck.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed