Large Cup Holder Insert
2017 Honda Ridgeline
Description
I made this cup holder to be inserted into the opening in the 2nd gen honda ridgeline storage compartment. it basically sandwiches between the front of the cubby and the normal lid that slides to close the compartment. I created it primarily to hold my 40 Oz Linus Tech Tips water bottle. I recommend you print it in PETG or ABS because PLA will warp badly if the vehicle is left in the sun. There is another smaller compartment beside the cupholder to hold random stuff.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I made this cup holder to be inserted into the opening in the 2nd gen honda ridgeline storage compartment. it basically sandwiches between the front of the cubby and the normal lid that slides to close the compartment. I created it primarily to hold my 40 Oz Linus Tech Tips water bottle. I recommend you print it in PETG or ABS because PLA will warp badly if the vehicle is left in the sun. There is another smaller compartment beside the cupholder to hold random stuff.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed