Cup Holder Adapter
2017 Subaru Outback
Description
These are cupholder adapters I printed for a 2017 Subaru Outback. They take the center cupholder hole and make it smaller. They have a finger hole to make it easier to pull out of the cupholder. I can print them smooth with no support, but if you have overhang issues you may want to sand this fingerhole out before installing. These are not the ideal ones. They should be modified slightly shorter in my opinion so they fit in the door easier when not in use. However I am locked out of Fusion360 unless I give them money, and only have these STL files for now. Feel free to remix the center larger/smaller. Make the height of the holder shorter (cut the bottom off, or it sinks in the hole) and offset the center side to side as needed.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
These are cupholder adapters I printed for a 2017 Subaru Outback. They take the center cupholder hole and make it smaller. They have a finger hole to make it easier to pull out of the cupholder. I can print them smooth with no support, but if you have overhang issues you may want to sand this fingerhole out before installing. These are not the ideal ones. They should be modified slightly shorter in my opinion so they fit in the door easier when not in use. However I am locked out of Fusion360 unless I give them money, and only have these STL files for now. Feel free to remix the center larger/smaller. Make the height of the holder shorter (cut the bottom off, or it sinks in the hole) and offset the center side to side as needed.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed