Tail Light Removal Tool
2017 Toyota Yaris Gen 3
Description
The tail light in my 2017 Yaris went out and the socket that holds the bulb was super tight. I could not turn it with my fingers. My hands were too big to work in the space. This "spanner" fits over the back and you can turn it by hand, wrench, or stick a screwdriver in the hole for leverage. It's simple, but it works. It might work for other Toyota light sockets but I only have one Toyota. The slot is 13mm x 30mm and 15mm deep.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The tail light in my 2017 Yaris went out and the socket that holds the bulb was super tight. I could not turn it with my fingers. My hands were too big to work in the space. This "spanner" fits over the back and you can turn it by hand, wrench, or stick a screwdriver in the hole for leverage. It's simple, but it works. It might work for other Toyota light sockets but I only have one Toyota. The slot is 13mm x 30mm and 15mm deep.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed