Air Vent Magnetic Phone Mount Insert
2018 Dacia Duster
Description
This an insert for the airvent of Dacia Duster 2018. It fit in the mouths of the air with a click and can support 4 magnets 12x2mm (locked with superglue). Create your phone support with other 4 magnets (distance between center of magnets is 44.8mm). Print it from the flat side with no support. Please use HTPLA to print it.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Fit Reports
How this part printed and fit, from the community.
Part Description
This an insert for the airvent of Dacia Duster 2018. It fit in the mouths of the air with a click and can support 4 magnets 12x2mm (locked with superglue). Create your phone support with other 4 magnets (distance between center of magnets is 44.8mm). Print it from the flat side with no support. Please use HTPLA to print it.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Fit Reports
How this part printed and fit, from the community.