Anti-tsunami Wing
2018 Dacia Duster
Description
This are 2 wing anti tsunami for Dacia Duster 2018. Must place in front of front wheels to avoid water on the front glass when crossing over big puddles. You can fix with one screw already present on the car and othe 3 little screw. Rotate 180 degree stl (one DX and one SX) and print without supports. ATTENTION ! The main hole position was modified, the stl are updated. If downloaded them before 1/10/2018 please redownload.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This are 2 wing anti tsunami for Dacia Duster 2018. Must place in front of front wheels to avoid water on the front glass when crossing over big puddles. You can fix with one screw already present on the car and othe 3 little screw. Rotate 180 degree stl (one DX and one SX) and print without supports. ATTENTION ! The main hole position was modified, the stl are updated. If downloaded them before 1/10/2018 please redownload.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed