Cup And Coins Holder
2018 Dacia Duster
Description
This cup with coins holder is made for Dacia Duster 2018. It was made to enter in one of the two can holder of the front dashboard of the car. After printing the cup you need to print five pieces of the file "undercoin" (make them whit TPU) and insert them in the coin seat, this to not have noise from coins when driving over hollow of the road. The cup was printed with High Temperature PLA 0,2 layer high, 230C°, 40mm/sec, 25%infill and then for 2 hours at 90C° in a electric oven, this to strengthen PLA to resist to the high temperature inside the car in summer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This cup with coins holder is made for Dacia Duster 2018. It was made to enter in one of the two can holder of the front dashboard of the car. After printing the cup you need to print five pieces of the file "undercoin" (make them whit TPU) and insert them in the coin seat, this to not have noise from coins when driving over hollow of the road. The cup was printed with High Temperature PLA 0,2 layer high, 230C°, 40mm/sec, 25%infill and then for 2 hours at 90C° in a electric oven, this to strengthen PLA to resist to the high temperature inside the car in summer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed