Ventilation Grid Holder
2018 Dacia Duster
Description
This is exactly the same as the original except I made the slots of the nuts which with the bolt hold the two parts together, bigger to accommodate standard DIN 934 hexagonal nuts instead of only the more unusual square nuts in the original design. Both types of nuts should fit. Square nuts won't just fit snuggly but they shouldn't roll either while screwing. Once completely screwed both types should be as tight. Check this thing for nice M3 bolts, including the required M3x40 bolt: https://www.thingiverse.com/thing:2851475 And the M3 nut: https://www.thingiverse.com/thing:582089 Credit: Thanks to PaJa_trb https://www.thingiverse.com/PaJa_trb for his smart original design.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is exactly the same as the original except I made the slots of the nuts which with the bolt hold the two parts together, bigger to accommodate standard DIN 934 hexagonal nuts instead of only the more unusual square nuts in the original design. Both types of nuts should fit. Square nuts won't just fit snuggly but they shouldn't roll either while screwing. Once completely screwed both types should be as tight. Check this thing for nice M3 bolts, including the required M3x40 bolt: https://www.thingiverse.com/thing:2851475 And the M3 nut: https://www.thingiverse.com/thing:582089 Credit: Thanks to PaJa_trb https://www.thingiverse.com/PaJa_trb for his smart original design.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed