Qi Wireless Charger Replacement Trim Piece
2020-2021 Toyota Highlander
Description
My 2021 Highlander came with a QI Wireless cellphone charger. My phone (2021 Moto ACE) cannot use a QI charger. The Highlander QI charger sits on top of the center console and must be moved out of the way to get at anything in or out of the console. Not a good design in my opinion. This trim piece fits over the plastic hinge pins that are obvious when the QI charger is removed. Remove the charger by removing all the phillips screws, unplug the connector and cover the exposed hinge pins with this trim piece. I used 4 x 3mm x 9mm self-taping screws. Printed with PETG to minimize heat and sun exposure issues. This may fit other years including 2020. Designed in SketchUp (file included)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
My 2021 Highlander came with a QI Wireless cellphone charger. My phone (2021 Moto ACE) cannot use a QI charger. The Highlander QI charger sits on top of the center console and must be moved out of the way to get at anything in or out of the console. Not a good design in my opinion. This trim piece fits over the plastic hinge pins that are obvious when the QI charger is removed. Remove the charger by removing all the phillips screws, unplug the connector and cover the exposed hinge pins with this trim piece. I used 4 x 3mm x 9mm self-taping screws. Printed with PETG to minimize heat and sun exposure issues. This may fit other years including 2020. Designed in SketchUp (file included)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed