Dashboard Cubbyhole Clip Base For Phone Holder
2025 Ford Transit
Description
This clip/mount can be fixed to the upper edge of the cubbyhole/pocket located below the centre media screen on a Ford Transit van (full size Transit not certain if the custom has the same pocket). I created it to provide a mounting point for a mobile phone holder (not part of model) which I then glued and screwed on to the clip/mount. This avoids the issue of either stick on mounts coming unstuck or having to make holes in the vehicle's dashboard. The clip has a 20mm M5 bolt so that the clip can be fixed securely onto the front face of the cubbyhole/pocket. (Bolt contacts the back of the face so any mark left would not be visible.) Fairly easy to do this up with an alan key.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This clip/mount can be fixed to the upper edge of the cubbyhole/pocket located below the centre media screen on a Ford Transit van (full size Transit not certain if the custom has the same pocket). I created it to provide a mounting point for a mobile phone holder (not part of model) which I then glued and screwed on to the clip/mount. This avoids the issue of either stick on mounts coming unstuck or having to make holes in the vehicle's dashboard. The clip has a 20mm M5 bolt so that the clip can be fixed securely onto the front face of the cubbyhole/pocket. (Bolt contacts the back of the face so any mark left would not be visible.) Fairly easy to do this up with an alan key.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed