Hood Bushing
1960-1979 Saab 95/96
Description
This bushing is for the 60's and 70's vintage Saab 95 and 96 hood attachment. My co-conspirator on this project is Ray Kopczynski and the vehicles in the pictures are his. The photo of his collection in the driveway was stolen fair and square from The Saab Network, specifically http://www.saabnet.com/tsn/members/gallery.html?memberID=13&do=show&id=19791 Hi Scott!! Please visit TSN, it is a very good resource for all Saab cars. http://www.saabnet.com/index.html To see what the Northwest Saab Owners Club is up to, visit http://www.nwsoc.org/ Note: Best fit was found to be with the STL scaled to 101%.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This bushing is for the 60's and 70's vintage Saab 95 and 96 hood attachment. My co-conspirator on this project is Ray Kopczynski and the vehicles in the pictures are his. The photo of his collection in the driveway was stolen fair and square from The Saab Network, specifically http://www.saabnet.com/tsn/members/gallery.html?memberID=13&do=show&id=19791 Hi Scott!! Please visit TSN, it is a very good resource for all Saab cars. http://www.saabnet.com/index.html To see what the Northwest Saab Owners Club is up to, visit http://www.nwsoc.org/ Note: Best fit was found to be with the STL scaled to 101%.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed