Console Clock Usb Filler Panel
1971-1973 Ford Mustang
Description
This is a replacement for the often dead console clock on 1971-73 mustangs, It uses the 12 volt UBS panel from Amazon linked below to supply additional power points that don't use up your Cigarette lighter. I recommend printing in ABS or PETG with ironing enabled for the best possible surface finish. ABS sands well with 400-600 grit for a nice paintable finish. https://a.co/d/0zPJWFp?sfnsn=mo
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a replacement for the often dead console clock on 1971-73 mustangs, It uses the 12 volt UBS panel from Amazon linked below to supply additional power points that don't use up your Cigarette lighter. I recommend printing in ABS or PETG with ironing enabled for the best possible surface finish. ABS sands well with 400-600 grit for a nice paintable finish. https://a.co/d/0zPJWFp?sfnsn=mo
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed