Cab Molding Clip
1973-1987 Chevrolet/gmc C10/c15
May 7, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
this is another basic part of necessity, as i was missing one of the 2 clips that bolt through the side of the cab for the rear trim piece. hole for a standard trim stud/bolt and the small square is for a bent paperclip if you want the spring retention like the original
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
this is another basic part of necessity, as i was missing one of the 2 clips that bolt through the side of the cab for the rear trim piece. hole for a standard trim stud/bolt and the small square is for a bent paperclip if you want the spring retention like the original
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed