Radio Adapter Bezel
1973-1979 Ford Truck
Description
This is an adapter bezel for RetroSound radios made to fit 73-79 Ford trucks (Bezel 126) but it should also work on Mustangs of the era and some GM A-body cars from the late 60's and 70's, anything with a 50.5mm x 101mm opening. Print in PETG or better for heat resistance, 100% infill. Print face down with supports for a smooth/bed textured face, or face up with a brim and supports for the 3d-printed look. Enjoy
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is an adapter bezel for RetroSound radios made to fit 73-79 Ford trucks (Bezel 126) but it should also work on Mustangs of the era and some GM A-body cars from the late 60's and 70's, anything with a 50.5mm x 101mm opening. Print in PETG or better for heat resistance, 100% infill. Print face down with supports for a smooth/bed textured face, or face up with a brim and supports for the 3d-printed look. Enjoy
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed