Glove Box Wood Trim Base Layer
1976-1985 Mercedes-benz W123 W123
May 6, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
The base layer for the wood trim on the infamous w123 glove box. If you manage to get the latch off, you should be able to put these two pieces together to get the base layer for the wood trim. Just put some wood veneer on, then finish it and it should be good to put back together.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
The base layer for the wood trim on the infamous w123 glove box. If you manage to get the latch off, you should be able to put these two pieces together to get the base layer for the wood trim. Just put some wood veneer on, then finish it and it should be good to put back together.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Glove Box Wood Trim Base Layer
1976-1985 Mercedes-benz W123 W123
by duberined
May 6, 2026
Loading pricing...