Seat Adjustment Handle
1976-1985 Mercedes-benz W123 W123
Description
Bolt on handle for the seat adjusters on Mercedes w123 and w116 model cars. Can be used for all 4 handles. Replacing these usually involves removing the seat and replacing the whole arm. With this you can just remove the remains of the old broken handle, slide this in place, and put screws through it with nuts. I used PETG and they are plenty strong. I sanded with 220 and 320 sandpaper and then finished on a buffing wheel for a smooth finish to match the original ones. Side height adjusters only fit one screw, front ones use 2. Fusion 360 file is included for anyone who wants to tinker with it. Hope this helps other classic Mercedes enthusiasts :)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Bolt on handle for the seat adjusters on Mercedes w123 and w116 model cars. Can be used for all 4 handles. Replacing these usually involves removing the seat and replacing the whole arm. With this you can just remove the remains of the old broken handle, slide this in place, and put screws through it with nuts. I used PETG and they are plenty strong. I sanded with 220 and 320 sandpaper and then finished on a buffing wheel for a smooth finish to match the original ones. Side height adjusters only fit one screw, front ones use 2. Fusion 360 file is included for anyone who wants to tinker with it. Hope this helps other classic Mercedes enthusiasts :)
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed