Hood Latch Pull Handle
1976-1985 Mercedes-benz W123 W123
May 4, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
The bonnet (hood) latch pull handle often breaks on these old Mercedes W123 cars This may also work on the W124 models The actual part is slightly curved, so I removed the part while still warm, and bent it the correct amount before it cooled - needed to drill out the hole for the metal pin Works very well
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
The bonnet (hood) latch pull handle often breaks on these old Mercedes W123 cars This may also work on the W124 models The actual part is slightly curved, so I removed the part while still warm, and bent it the correct amount before it cooled - needed to drill out the hole for the metal pin Works very well
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed